An Investigation of Ion-Pairing of Alkali Metal Halides in Aqueous Solutions Using the Electrical Conductivity and the Monte Carlo Computer Simulation Methods

Structural Study of Aqueous Electrolyte Solution by MeV Liquid Electron Scattering

The impact of ions on water has long been a subject of great interest, as it is closely tied to the hydration structure, dynamics, and properties of electrolyte solutions. Over centuries of investigation, the influence of ions on water's structure remains highly debated. Prevailing techniques, such as neutron and X-ray scattering, primarily focus on the microscopic structure of salt solutions at very high concentrations, mostly above 1 mol/L. In this study, we measured the structure of aqueous potassium iodide (KI) and potassium chloride (KCl) solutions using MeV liquid electron scattering (MeV-LES) across a concentration range of 0.10 to 0.75 mol/L. The obtained results provide detailed insights into the variations in ion-oxygen and oxygen-oxygen correlations as a function of concentration. The observed structural differences between KI and KCl solutions are in line with the structure maker/breaker theory, which suggests that iodide ions exert a more pronounced effect than chloride ions on disrupting the water shell. This work demonstrates the potency of MeV-LES for investigating the atomic structure in liquids, augmenting the modern analytical toolbox.

Estimation of thermodynamic and physicochemical properties of the alkali astatides: On the bond strength of molecular astatine (At2 ) and the hydration enthalpy of astatide (At- )

The recent accurate and precise determination of the electron affinity (EA) of the astatine atom At0 warrants a re-investigation of the estimated thermodynamic properties of At0 and astatine containing molecules as this EA was found to be much lower (by 0.4 eV) than previous estimated values. In this contribution we estimate, from available data sources, the following thermodynamic and physicochemical properties of the alkali astatides (MAt, M = Li, Na, K, Rb, Cs): their solid and gaseous heats of formation, lattice and gas-phase binding enthalpies, sublimation energies and melting temperatures. Gas-phase charge-transfer dissociation energies for the alkali astatides (the energy requirement for M+ At- ➔ M0  + At0 ) have been obtained and are compared with those for the other alkali halides. Use of Born-Haber cycles together with the new AE (At0 ) value allows the re-evaluation of ΔHf (At0 )g (=56 ± 5 kJ/mol); it is concluded that (At2 )g is a weakly bonded species (bond strength <50 kJ/mol), significantly weaker bonded than previously estimated (116 kJ/mol) and much weaker bonded than I2 (148 kJ/mol), but in agreement with the finding from theory that spin-orbit coupling considerably reduces the bond strength in At2 . The hydration enthalpy (ΔHaq ) of At- is estimated to be -230 ± 2 kJ/mol (using ΔHaq [H+ ] = -1150.1 kJ/mol), in good agreement with molecular dynamics calculations. Arguments are presented that the largest alkali halide, CsAt, like the smallest, LiF, will be only sparingly soluble in water, following the generalization from hard/soft acid/base principles that "small likes small" and "large likes large."

Understanding specific ion effects and the Hofmeister series

Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.

Overlapping hydration shells in salt solutions causing non-monotonic Soret coefficients with varying concentration

We develop an intuitive picture that overlapping hydration shells in salt solutions cause non-monotonic Soret coefficients with varying concentration.

Mass action model of solution activity via speciation by solvation and ion pairing equilibria

Solutes and their concentrations influence many natural and anthropogenic solution processes. Electrolyte and solution models are used to quantify and predict such behavior. Here we present a mechanistic solution model based on mass action equilibria. Solvation and ion pairing are used to model speciated solute and solvent concentrations such that they correlate to a solution's vapor pressure (solvent activity) according to Raoult's law from dilute conditions to saturation. This model introduces a hydration equilibrium constant (K_ha) that is used with either an ion dissociation constant (K_id) or a hydration modifier (m) with an experimentally determined ion dissociation constant, as adjustable parameters to fit vapor-liquid equilibrium data. The modeled solvation equilibria are accompanied by molecular dynamics (MD) studies that support a decline in the observed degree of solvation with increased concentration. MD calculations indicate this finding is a combination of a solvent that solvates multiple solutes, and changes in a solute's solvation sphere, with the dominant factor changing with concentration. This speciation-based solution model is lateral to established electrostatics-based electrolyte theories. With its basis in mass action, the model can directly relate experimental data to the modeled solute and solvent speciated concentrations and structures.

Targeted modifications in ionic liquids - from understanding to design

Ionic liquids are extremely versatile and continue to find new applications in academia as well as industry. This versatility is rooted in the manifold of possible ion types, ion combinations, and ion variations. However, to fully exploit this versatility, it is imperative to understand how the properties of ionic liquids arise from their constituents. In this work, we discuss targeted modifications as a powerful tool to provide understanding and to enable design. A 'targeted modification' is a deliberate change in the structure of an ionic liquid. This includes chemical changes in an experiment as well as changes to the parameterisation in a computer simulation. In any case, such a change must be purposeful to isolate what is of interest, studying, as far as is possible, only one concept at a time. The concepts can then be used as design elements. However, it is often found that several design elements interact with each other - sometimes synergistically, and other times antagonistically. Targeted modifications are a systematic way of navigating these overlaps. We hope this paper shows that understanding ionic liquids requires experimentalists and theoreticians to join forces and provides a tool to tackle the difficult transition from understanding to design.

Failure of molecular dynamics to provide appropriate structures for quantum mechanical description of the aqueous chloride ion charge-transfer-to-solvent ultraviolet spectrum

The lowest band in the charge-transfer-to-solvent ultraviolet absorption spectrum of aqueous chloride ion is studied by experiment and computation. Interestingly, the experiments indicate that at concentrations up to at least 0.25 M, where calculations indicate ion pairing to be significant, there is no notable effect of ionic strength on the spectrum. The experimental spectra are fitted to aid comparison with computations. Classical molecular dynamic simulations are carried out on dilute aqueous Cl-, Na+, and NaCl, producing radial distribution functions in reasonable agreement with experiment and, for NaCl, clear evidence of ion pairing. Clusters are extracted from the simulations for quantum mechanical excited state calculations. Accurate ab initio coupled-cluster benchmark calculations on a small number of representative clusters are carried out and used to identify and validate an efficient protocol based on time-dependent density functional theory. The latter is used to carry out quantum mechanical calculations on thousands of clusters. The resulting computed spectrum is in excellent agreement with experiment for the peak position, with little influence from ion pairing, but is in qualitative disagreement on the width, being only about half as wide. It is concluded that simulation by classical molecular dynamics fails to provide an adequate variety of structures to explain the experimental CTTS spectrum of aqueous Cl-.

Dynamic and Static Properties of Aqueous NaCl Solutions at 25°C as a Function of NaCl Concentration: A Molecular Dynamics Simulation Study

We present the result of molecular dynamics (MD) simulations to calculate the molar conductivity ${\mathrm{\Lambda }}_m\left(={\lambda }_{N{a}^{+}}+{\lambda }_{C{l}^{-}}\right)$ of NaCl in SPC/E water at 25°C as a function of NaCl concentration (c) using Ewald sums employing a velocity Verlet algorithm. It is found that the MD result for Λm with Ewald sum parameter κ = 0.10 Å−1 gives the closest one to the experimental data and that the obtained radial distribution functions $g_{ii}$ (r) with κ = 0.10 Å−1 show a dramatic change with a very deep minimum of $g_{\text{NaCl}}$ (r) and, as a result, sharp maxima of $g_{\text{NaNa}}$ (r) and $g_{\text{ClCl}}$ (r) at the distance 9.95 Å, which indicates a characteristic of ionic atmosphere, the basis of the Debye–Hückel theory of ionic solutions. The static and dynamic properties of NaCl (aq) solutions are analyzed in terms of radial distribution functions, hydration numbers, coordination numbers around Na+ and Cl−, residence times of water around Na+ and Cl−, water diffusion, and ion-ion electrostatic energies to explain the behavior of the molar conductivity Λm of NaCl obtained from our MD simulations.

How Water's Properties Are Encoded in Its Molecular Structure and Energies

How are water's material properties encoded within the structure of the water molecule? This is pertinent to understanding Earth's living systems, its materials, its geochemistry and geophysics, and a broad spectrum of its industrial chemistry. Water has distinctive liquid and solid properties: It is highly cohesive. It has volumetric anomalies-water's solid (ice) floats on its liquid; pressure can melt the solid rather than freezing the liquid; heating can shrink the liquid. It has more solid phases than other materials. Its supercooled liquid has divergent thermodynamic response functions. Its glassy state is neither fragile nor strong. Its component ions-hydroxide and protons-diffuse much faster than other ions. Aqueous solvation of ions or oils entails large entropies and heat capacities. We review how these properties are encoded within water's molecular structure and energies, as understood from theories, simulations, and experiments. Like simpler liquids, water molecules are nearly spherical and interact with each other through van der Waals forces. Unlike simpler liquids, water's orientation-dependent hydrogen bonding leads to open tetrahedral cage-like structuring that contributes to its remarkable volumetric and thermal properties.

Proteins in Ionic Liquids: Current Status of Experiments and Simulations

In the last two decades, while searching for interesting applications of ionic liquids as potent solvents, their solvation properties and their general impact on biomolecules, and in particular on proteins, gained interest. It turned out that ionic liquids are excellent solvents for protein refolding and crystallization. Biomolecules showed increased solubilities and stabilities, both operational and thermal, in ionic liquids, which also seem to prevent self-aggregation during solubilization. Biomolecules can be immobilized, e.g. in highly viscous ionic liquids, for particular biochemical processes and can be designed to some extent by the proper choice of the ionic liquid cations and anions, which can be characterized by the Hofmeister series.

Polyiodides in room-temperature ionic liquids

Polyiodides, I_m⁻, were formed in room-temperature ionic liquids (RTILs).

Mobility and association of ions in aqueous solutions: the case of imidazolium based ionic liquids

Combining MD simulations and RISM calculations with experiments, we demonstrated that the interionic interactions of investigated ILs as model 1,1 electrolytes in water solutions are weak but evidently dependent on the molecular structure.

Characterization of selective binding of biologically relevant inorganic ions with the proline zwitterion by 3D-RISM theory

The features of selective binding of several biologically relevant mono- and divalent inorganic ions with the proline zwitterion were studied over a wide range of electrolyte concentrations.