Removal of Sr(II) from aqueous solutions using polyacrylamide modified graphene oxide composites

Synthesis and Evaluation of Peptide-Manganese Dioxide Nanocomposites as Adsorbents for the Removal of Strontium Ions

In this study, a novel organic-inorganic hybrid material IIGK@MnO2 (2-naphthalenemethyl-isoleucine-isoleucine-glycine-lysine@manganese dioxide) was designed as a novel adsorbent for the removal of strontium ions (Sr2+). The morphology and structure of IIGK@MnO2 were characterized using TEM, AFM, XRD, and XPS. The results indicate that the large specific surface area and abundant negative surface charges of IIGK@MnO2 make its surface rich in active adsorption sites for Sr2+ adsorption. As expected, IIGK@MnO2 exhibited excellent adsorbing performance for Sr2+. According to the adsorption results, the interaction between Sr2+ and IIGK@MnO2 can be fitted with the Langmuir isotherm and pseudo-second-order equation. Moreover, leaching and desorption experiments were conducted to assess the recycling capacity, demonstrating significant reusability of IIGK@MnO2.

A Study of Sr Sorption Behavior in Claystone from a Candidate High-Level Radioactive Waste Geological Disposal Site under the Action of FeOOH Colloids

Colloids have a significant influence on the migration of nuclides in claystone, which is an important geological barrier. The sorption of strontium on claystone in the presence of FeOOH colloids was investigated in samples from the Suhongtu site, a candidate high-level radioactive waste disposal site in China. The effects of colloid amount, solid content, and pH were investigated by batch tests, and the sorption reaction mechanism was analyzed by kinetic modeling and microscopic characterization techniques. The results indicate that the sorption of Sr by claystone increased with the solids content, and the claystone had a stronger Sr sorption capacity under alkaline conditions. The Sr sorption kinetics were best described by the pseudo-first-order and pseudo-second-order models, which revealed that the progress is affected by physical diffusion and chemical sorption. Furthermore, the microscopic characterization results demonstrate that cation exchange reactions and surface complex reactions are the main sorption mechanisms for Sr sorption on claystone. Ca and Mg plasmas in claystone minerals can have cation replacement reactions with Sr, and functional groups such as -OH and [CO₃]^2- can have complexation reactions with Sr to adsorb Sr on the surface of the claystone. Additionally, the presence of the FeOOH colloid inhibited the sorption effect of claystone slightly. The FeOOH colloid could occupy sorption sites on the claystone surface, which reduces the activity of the functional groups and inhibits the sorption of Sr on claystone.

NanoTafla Nanocomposite as a Novel Low-Cost and Eco-Friendly Sorbent for Strontium and Europium Ions

Now the wide use of nanooxides is attributed to their remarkable collection of properties. Nanocomposites have an impressive variety of important applications. A thermal decomposition approach provides a more optimistic method for nanocrystal synthesis due to the low cost, high efficiency, and expectations for large-scale production. Therefore, in this study a new eco-friendly nanooxide composite with sorption characteristics for europium (Eu(III)) and strontium (Sr(II)) was synthesized by a one-step thermal treatment process using earth-abundant tafla clay as a starting material to prepare a modified tafla (M-Taf) nanocomposite. The synthesized nancomposite was characterized by different techniques before and after sorption processes. Different factors that affected the sorption behavior of Eu(III) and Sr(II) in aqueous media by the M-Taf nanocomposite were studied. The results obtained illustrated that the kinetics of sorption of Eu(III) and Sr(II) by the M-Taf nanocomposite are obeyed according to the pseudo-second order and controlled by a Langmuir isotherm model with maximum sorption capacities (Q _max) of 25.5 and 23.36 mg/g for Eu(III) and Sr(II), respectively. Also, this novel low-cost and eco-friendly sorbent has promising properties and can be used to separate and retain some radionuclides in different applications.

Surface modified and functionalized graphene oxide membranes for separation of strontium from aqueous solutions

Graphene oxide-strontium (GO-Sr) composites prepared under different ambient conditions were characterized using morphological and spectroscopic techniques to optimize the uptake of Sr from aqueous solutions. These studies indicated that interactions among GO and Sr²⁺ ions are highly sensitive to size and aging of GO sheets, as well as pH of the ambience. Further, the extent of Sr uptake on GO sheets was found to be largely influenced by relative fractions of the associated -COOH, -OH, C-O-C functional groups and sp²-C domains. Membranes prepared using various forms of GO were evaluated for their Sr separation ability and, a window of parameters for optimum separation of Sr has been proposed. Among the variety of membranes studied, those made up of fresh and large GO sheets were found to exhibit superior Sr adsorption capacity (~296 mg/g) at limited GO mass. Further, adsorption efficiency of these GO membranes was observed to deteriorate with aging of GO sheets and rise of GO mass on membrane. The membrane based filtration procedure introduced in present work facilitates to provide a lamellar structure of GO sheets with abundant surface area, diverse and accessible sites for Sr²⁺ ion uptake and offer high Sr adsorption efficiencies.

Synergistic effect of carboxyl and sulfate groups for effective removal of radioactive strontium ion in a Zr-metal-organic framework

Rapid removal of radioactive strontium from nuclear wastewater is of great significance for environmental safety and human health. This work reports the effective adsorption of strontium ion in a stable dual-group metal-organic framework, Zr₆(OH)₁₄(BDC-(COOH)₂)₄(SO₄)_0.75 (Zr-BDC-COOH-SO₄), which contains strontium-chelating groups (-COOH and SO₄) and a strongly ionizable group (-COOH). Zr-BDC-COOH-SO₄ exhibits very rapid adsorption kinetics (<5 min) and a maximum adsorption capacity of 67.5 mg g^-1. The adsorption behaviors can be well fitted to the pseudo-second-order model and the Langmuir isotherm model. Further investigations indicate that the adsorption of Sr²⁺ onto Zr-BDC-COOH-SO₄ would not be obviously affected by solution pH and adsorption temperature. The feasible regeneration of the adsorbent was also demonstrated using a simple elution method. Mechanism investigation suggests that free -COOH contributes to the rapid adsorption based on electrostatic interaction, while the introduction of -SO₄ significantly enhanced the adsorption capacity. Thus, these results suggest that Zr-BDC-COOH-SO₄ is a potential candidate for Sr²⁺ removal. They also introduce dual groups as an effective strategy for designing high-efficiency adsorbents.

Sorption of Sr in granite under typical colloidal action

The sorption behaviour of Sr into granite was studied with the presence or absence of typical colloids (goethite, bentonite and humic acid). A batch technique was used to analyse the influencing process of colloids and key factors. Moreover, scanning electron microscopy and Fourier transform infrared spectroscopy were used to characterize granite samples before and after the batch experiments. The experiments showed that the presence of colloids promotes the sorption of Sr in the broken granite system; when goethite, bentonite or humic acid (HA) was present, the sorption capacity percentages were 1.8, 2.13 and 1.93 times higher, respectively, than those in the granite only system. As the initial Sr²⁺ concentration increased, the sorption of Sr increased, but the sorption percentage decreased; the sorption percentage reached a maximum at pH = 7 and decreased as the acidity or alkalinity of the solution increased. The sorption of granite may be related to the interstitial water of the hydroxyl, quartz, and feldspar, the intergranular water of granite groups and the water molecules attached to the granite. Moreover, the surface of the granite sample was rougher after the sorption experiment.

Effect of Colloidal Silicate on the Migration Behaviour of Strontium in Groundwater Environment of Geological Disposal Candidate Site

Various colloids are present in the natural groundwater environment, and colloids act on the processes involved when radionuclides leak from a repository in a high-level waste disposal site. This paper investigates the effect of colloidal silicate in natural groundwater environments on the migration behaviour of Sr(II). Three different experimental cases have been designed: (1) effect in the presence of colloidal silicate, (2) effect in the presence of a porous medium, and (3) effect in the presence of both colloidal silicate and porous medium (referred to as CS, PM, and PC, respectively). Batch experiments were used to study the effect of influencing factors on Sr(II) migration behaviour, such as the amount of CS, solid-to-liquid ratio, pH, contact time, and initial concentration of Sr(II). The experiments showed that the effect of PC on the migration behaviour of Sr(II) was greatest, and the presence of CS enhanced the sorption. The colloid amount, pH, and solid-to-liquid ratio significantly affected the migration behaviour. The more the colloids were added, the better the adsorption effect. The optimal pH and solid-to-liquid ratio were 6 and 20 : 1, respectively. The alkaline environment is more conductive to colloid sorption. When the solid-to-liquid ratio was 20 : 1, the sorption percentage of PC is 0.5 times larger than PM. Although the PC has a longer adsorption equilibrium time, the percentage of adsorption can be larger than that in the other two cases. The kinetics and isotherms of Sr(II) were best described by the pseudo-second-order and Langmuir models. It was inferred that strong chemical interactions and/or surface complexation contributed primarily to Sr(II) sorption, and the process was on the monolayer adsorption of the outer surface. These findings provide valuable information for the migration behaviour of strontium in groundwater environments of geological disposal site. At the same time, it provides information for the implementation of permeable reactive barrier technology to control the transport of radioactive Sr(II) and its species in natural surface and groundwater.

Effect of a humic acid colloid on the sorption behaviour of Sr onto soil in a candidate high-level radioactive waste geological disposal site

We explored the effect of the presence or absence of humic acid (HA) on the sorption behaviour of Sr onto soil. We examined three different experimental cases for Sr sorption: (1) sorption in the presence of only colloidal HA, (2) sorption in the presence of only soil and (3) sorption in the presence of both colloidal HA and soil (HS). A batch technique was used to study the influencing factors, including the amount of colloidal HA, solid content, pH, initial concentration of Sr and contact time. The experiments showed that the influencing factors significantly affected the sorption process. For example, in the case of soil and HS, the sorption percentage increased rapidly with increasing solid content at m/V < 20 g/L, changing from 8.35% and 37.54% to 49.09% and 77.03%, respectively. Moreover, scanning electron microscopy and Fourier transform infrared spectroscopy were used to characterize samples. The kinetics and isotherms of Sr were best described by the pseudo-second-order and Langmuir models, which indicated that the process was controlled by chemisorption and uniform monolayer sorption with constant energy on the outer surface. These findings provide valuable information for predicting strontium migration in radioactive waste disposal sites.

Enhancement of H2O2 Decomposition by the Co-catalytic Effect of WS2 on the Fenton Reaction for the Synchronous Reduction of Cr(VI) and Remediation of Phenol

The greatest problem in the Fe(II)/H₂O₂ Fenton reaction is the low production of ·OH owing to the inefficient Fe(III)/Fe(II) cycle and the low decomposition efficiency of H₂O₂ (<30%). Herein, we report a new discovery regarding the significant co-catalytic effect of WS₂ on the decomposition of H₂O₂ in a photoassisted Fe(II)/H₂O₂ Fenton system. With the help of WS₂ co-catalytic effect, the H₂O₂ decomposition efficiency can be increased from 22.9% to 60.1%, such that minimal concentrations of H₂O₂ (0.4 mmol/L) and Fe²⁺ (0.14 mmol/L) are necessary for the standard Fenton reaction. Interestingly, the co-catalytic Fenton strategy can be applied to the simultaneous oxidation of phenol (10 mg/L) and reduction of Cr(VI) (40 mg/L), and the corresponding degradation and reduction rates can reach up to 80.9% and 90.9%, respectively, which are much higher than the conventional Fenton reaction (52.0% and 31.0%). We found that the expose reductive W⁴⁺ active sites on the surface of WS₂ can greatly accelerate the rate-limiting step of Fe³⁺/Fe²⁺ conversion, which plays the key role in the decomposition of H₂O₂ and the reduction of Cr(VI). Our discovery represents a breakthrough in the field of inorganic catalyzing AOPs and greatly advances the practical utility of this method for environmental applications.

Three-dimensional graphene-based adsorbents in sewage disposal: a review

A kind of graphene functional materials based on three-dimensional (3D) porous structure is a new star for environmental application in the past decades because it not only inherits the perfect carbon crystal structure of two-dimensional (2D) graphene sheets but also exhibits several advantages such as extremely low density, high porosity, and big surface area, all which enable diverse contaminants to easily access and diffuse into 3D networks, and make these materials ideal adsorbents with superior adsorptivity and recyclability. This review aims to summarize the recent progress in constructing 3D graphene-based adsorbents (3DGBAs) with two hybrid systems such as graphene/polymers and graphene/inorganic nanomaterials, and to provide a fundamental understanding of synthetic methods for interconnecting these nanostructures, structure-property relationships, and extensive applications in environmental protection towards adsorption of heavy metals, dyes, oils, and organic pollutants. Furthermore, we make a forecast on the future development opportunities and technical challenges, which is hoped to make an inspiration for the researchers to exploit a new family of graphene-based adsorption materials. Graphical abstract ᅟ.

Preparation of alginate fibers coagulated by calcium chloride or sulfuric acid: Application to the adsorption of Sr2

The adsorption behavior of Sr²⁺ over alginate (Alg) fibers prepared by wet spinning was investigated. Different grades of sodium alginate (Alg-Na) were chosen. The Alg fibers were obtained by coagulation of 1% H₂SO₄ (Alg-acid) or 5% CaCl₂ (Alg-Ca) solutions. In addition, the Sr²⁺ adsorption percentages of the spherical Alg-Ca beads with a 0.672-mm-diameter was 70.64% which was significantly lower than that Alg-Ca fibers (79.49%). These results suggested that the fibrous shape is more suitable than the spheres as an adsorbent from sea water. For Sr²⁺ adsorption capacities using different Alg fibers, the Alg-acid fibers obtained from 12% IL-2 and 8% I-2 grade solutions reached adsorption equilibrium at 99.88 and 99.27%, respectively, within 3 min. However, the Alg-Ca fiber obtained from 8% I-2 grade solution reached equilibrium at 80.01% within 30 min. Moreover, the Alg-acid fiber obtained from 8% I-2 grade solution adsorbed up to 34 mg/g of Sr²⁺ at an initial concentration of 1700 mg/L solutions. However, when Sr²⁺ co-existing cations (Ca²⁺, Na⁺, and mixtures of them) the adsorption capacity of the Alg-Ca fiber obtained from 8% I-2 grade solution slightly decreased since the egg-box structure of Alg-Ca fiber favored the selective Sr²⁺ adsorption and subsequent ion exchange with Ca²⁺.

Nitrogen-containing amino compounds functionalized graphene oxide: Synthesis, characterization and application for the removal of pollutants from wastewater: A review

Nowadays, using graphene oxide (GO) as an adsorbent for removing pollutants from wastewater has attracted increasing attention due to its unique physic-chemical properties. Nitrogen-containing amino (NA) compounds have excellently complexing properties due to their abundant amino functional groups. In order to obtain an innovative adsorbent, functionalized GO (NAGO) has been developed by combining the properties of GO with the advantages of NA compounds. The obtained NAGO composites usually exhibit great improvement in adsorption properties and can be used as a promising adsorbent for decontamination of wastewater. This paper reviewed recent progress of synthetic technologies about fabricating various NAGOs, and their morphologies, structures and functional characteristics. Meanwhile, important applications of NAGOs for different kind of pollutants and theory of the adsorption phenomena are discussed based on the isothermal and kinetic adsorption models. Furthermore, the affecting factors, underlying mechanisms and comparison with other adsorbents for the removal of pollutants are reviewed. Conclusively, the perspectives and challenges involved in the application of NAGOs for decontamination of wastewater have also been proposed to promote sustainable development of this new exciting field.

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.