4(N,N-dimethylamino) benzaldehyde nicotinic hydrazone as corrosion inhibitor for mild steel in 1 M HCl solution: An experimental and theoretical study

Assessment of the Inhibitory Efficacy of a Thiazole Derivative as an Efficient Corrosion Inhibitor for Augmenting the Resistance of MS in Acidic Environments

Numerous thiazole compounds have been developed as cutting-edge inhibitors because of a rising fascination with using corrosion inhibitors (CIs) and preventative measures to prevent mild steel (MS) from deteriorating. In this study, the ability of a novel thiazole derivative, 2-hydrazono-3-methyl-2,3-dihydrobenzo[d]thiazole hydrochloride (HMDBT), to prevent corrosion of MS (MS) in HCl has been reconnoitered using various approaches, Viz. gravimetric analysis, electrochemical (EC) analysis, and different surface characterizations. With an inhibition efficiency (IE %) of 95.35%, the outcomes elucidate that HMDBT functions as a potent MS CI that is environmentally friendly and sustainable. The computed activation and thermodynamic factors were also employed to better explain the process underpinning the inhibiting tendency of HMDBT. According to the computed values, the HMDBT molecules physically and chemically adhered to the MS surface following the Langmuir model, generating a dense protective layer that may be associated with the presence of a benzene ring and heteroatoms (S & N) in the HMDBT architecture. Based on the findings of the EIS studies, an intensification in the CI's concentration from (50 →800) ppm is ushered by increases in polarization resistance (Rp) from (80.72, 354.31) Ω cm2, and attenuation in double-layer capacitance (Cdl) from (198.78 → 44.13) μF cm-2, respectively, confirming the inhibitory proficiency of HMDBT. The IE of the inhibitor was reported around 95.35% by weight loss measurement and 89.94% through EC measurement. Theoretical analysis including density functional theory (DFT) and molecular dynamics (MD) simulations were carried out to investigate the additional effects of HMDBT on the anticorrosion effectiveness and mechanism of inhibition. The theoretical parameters that were calculated provided important assistance in comprehending the inhibitory mechanism that the CI's moieties disclosed and are in strong concord with experimental methods. To create a "green" inhibitor system, the work presented here provided a potent technique to reduce corrosion by adding a potent new inhibitor.

Biogenic synthesis of levofloxacin-loaded copper oxide nanoparticles using Cymbopogon citratus: A green approach for effective antibacterial applications

Despite the success of antibiotics in medicine, the treatment of bacterial infection is still challenging due to emerging resistance and suitable drug delivery system, therefore, innovative approaches focused on nanoparticles based antimicrobial drug delivery systems are highly desired. This research aimed to synthesize Cymbopogon citratus (C. citratus) aqueous extract-mediated copper oxide (CuO-Nps) conjugated with levofloxacin (LFX). The synthesized CuO NPs-LFX nano conjugate was confirmed by analysis using scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and infrared and ultraviolet/visible spectroscopy. Antibacterial activities were assessed in vitro through the agar well diffusion method against six bacterial strains of clinical relevance. CuO NPs confirmed by UV-Vis analysis absorption peak observed at 380 nm. TGA analysis showed 8.98% weight loss between the 400-800 ° C temperature range. The functional group's presence was confirmed by FTIR analysis. Spherical shape nanoparticles with an average particle size of 55 nm were recorded by FESEM. Results from agar well diffusion assay showed that CuO NPs-LFX prohibited the development of both gram-positive and gram-negative bacteria at all established concentrations, and the antibacterial propensity was more pronounced as compared to bare CuO NPs, Levofloxacin and C. citratus aqueous extract alone. The results showed that gram-negative bacteria are more susceptible to CuO NPs-LFX nano conjugate and at 10 μgmL-1 concentration, form a 10.1 mm zone of inhibition (ZOI), whereas gram-positive bacteria on the same concentration form 9.5 mm ZOI. LFX-loaded CuO NPs antibacterial activity was observed higher than plant extract, bare CuO NPs, and standard drug (Levofloxacin). This study provides a novel approach for the fabrication of biogenic CuO NPs with antibacterial drug levofloxacin and their usage as nano antibiotic carriers against pathogenic bacteria, especially antibiotic-resistant microbes.

Electrochemical and computational insights into the utilization of 2, 2- dithio bisbenzothiazole as a sustainable corrosion inhibitor for mild steel in low pH medium

Industries today place a high premium on environmentally friendly supplies that may effectively inhibit metal dissolution at a reasonable cost. Hence, in this paper, we assessed the corrosion inhibition effectiveness of the Thiazole derivative namely, 2, 2-Dithio Bisbenzothiazole (DBBT) against mild steel (MS) corrosion in 1 M HCl. Several experimental approaches, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface exploration using scanning electron/atomic force microscopy (SEM/AFM) and contact angle (CA), were utilized to conduct the measurements. In 1 M HCl corrosive medium at 298 K in the subsistence of 800 ppm of DBBT, this experiment indicated DBBT as an environment-friendly and sustainable corrosion inhibitor (CI) for MS, demonstrating an inhibition efficiency (IE %) of 97.71%. To deliver a deeper knowledge of the mechanism behind inhibitive behavior, the calculated thermodynamic and activation characteristics were applied. The calculated Gibbs free energy values indicated that the CI interacted physically and chemically with the MS surface, validating physio-chemical adsorption. The findings of the EIS research revealed that an upsurge in the doses of the CI is escorted by an upsurge in polarization resistance (Rp) from (88.05 → 504.04) Ωcm2, and a diminution in double layer capacitance (Cdl) from (97.46 → 46.33) μFcm-2 at (50 → 800) ppm respectively, affirming the inhibitive potential of DBBT. Additionally, the greatest displacement in Ecorr value being 76.13 mV < 85 mV, indicating that DBBT act as a mixed-form CI. To study the further impacts of DBBT on the inhibition capabilities of the compound under investigation, density functional theory (DFT) and molecular dynamics (MD) simulation were employed. Chemical and electrochemical approaches are in agreement with the computational analysis indicating DBBT is the most efficient CI.

Investigation of Corrosion Inhibition of Mild Steel in 0.5 M H2SO4 with Lachancea fermentati Inhibitor Extracted from Rotten Grapefruits (Vitis vinifera): Adsorption, Thermodynamic, Electrochemical, and Quantum Chemical Studies

Corrosion inhibition of mild steel (MS) was studied using Lachancea fermentati isolate in 0.5 M H2SO4, which was isolated from rotten grapes (Vitis vinifera) via biofilm formation. Biofilm over the MS surface was asserted by employing FT-IR and FE-SEM with EDXS, electrochemical impedance spectroscopy (EIS), AFM, and DFT-ESP techniques. The weight loss experiments and temperature studies supported the physical adsorption behavior of the corrosion inhibitors. The maximum inhibition efficiency (IE) value (90%) was observed at 293 K for 9 × 106 cfu/mL of Lachancea fermentati isolate. The adsorption of Lachancea fermentati isolate on the surface of MS confirms Langmuir's adsorption isotherm model, and the -ΔG values indicate the spontaneous adsorption of inhibitor over the MS surface. Electrochemical studies, such as potentiodynamic polarization (PDP) and EIS were carried out to investigate the charge transfer (CT) reaction of the Lachancea fermentati isolate. Tafel polarization curves reveal that the Lachancea fermentati isolate acts as a mixed type of inhibitor. The Nyquist plots (EIS) indicate the increase in charge transfer resistance (Rct) and decrease of double-layer capacitance (Cdl) values when increasing the concentration of Lachancea fermentati isolate. The spectral studies, such as UV-vis and FT-IR, confirm the formation of a complex between MS and the Lachancea fermentati isolate inhibitor. The formation of biofilm on the MS surface was confirmed by FE-SEM, EDXS, and XPS analysis. The proposed bioinhibitor shows great potential for the corrosion inhibition of mild steel in acid media.

Gaafar AR, Bourhia M, Habsaoui A, Mejdoub NEL. Physicochemical Characterization of Clay and Study of Cationic Methylene Blue Dye Adsorption

In an attempt to examine novel adsorbents in accessing an ideal adsorption system, this study aimed to help understand the main and secondary characteristics of a Moroccan natural clay. X-ray fluorescence, infrared, and scanning electron microscopy with energy-dispersive X-ray spectroscopy analysis (SEM-EDX) were used for the identification. The findings demonstrate that this Clay is composed of a mixture of quartz, calcite, magnetite, and Rutile in very high proportions. SEM revealed the presence of clay grains in the presence of fine particles and irregularly contoured sticks. The results of semiquantitative detection by EDX also reveal the presence of certain mineral species (Si, Al, Mg, Fe, K, Cl, S, Ca, and Na). The exploited kinetic technique was achieved using two different kinetic models: first- and second-order rate laws. Commensurate to the obtained results, the 2-sec order model better described the adsorption of dye MB onto the natural clay. The results confirmed that the adsorption process followed the Langmuir model with the high coefficient correlation obtained which are very close to 1. In the sequel, DFT results revealed that the HOMO and LUMO surfaces of the methylene blue dye are mostly distributed on all dye parts, reflecting possible strong interactions with the clay. The quantum descriptors investigated in this study identify the most nucleophilic and electrophilic centers that can be used to suggest a suitable mechanism for the adsorption of the dye by the clay. The values of enthalpy ΔH0 and entropy ΔS0 of activation were -15.88 kJ mol-1 and -0.021 J mol-1 K-1, respectively, show that the nature of the adsorption process of MB on clay is exothermic and the order of distribution of the dye molecules on the adsorbent increases with respect to that of the solution so the negative values of ΔG0 (from -9. 62 to -8.99 kJ mol-1) indicate that the adsorption process is spontaneous.

Effective corrosion inhibition of mild steel using novel 1,3,4-oxadiazole-pyridine hybrids: Synthesis, electrochemical, morphological, and computational insights

An easy synthesis of two 1,3,4-oxadiazole derivatives, namely, 2-phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole (POX) and 2-(4-methoxyphenyl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (4-PMOX), and their corrosion-inhibition efficacy against mild steel corrosion in 1 N HCl, is evaluated using weight loss from 303 to 323 K, Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), UV-Vis spectroscopy, along with theoretical evaluation. Both POX and 4-PMOX exhibit excellent inhibition efficiency, with values reaching 97.83% and 98% at 500 ppm, respectively. The PDP analysis reveals that both derivatives act as mixed-type inhibitors. The Langmuir adsorption isotherm provides insights into the adsorption phenomena, demonstrating that 4-PMOX exhibits superior adsorption behavior on the mild steel surface compared to POX. This finding is further supported by SEM, DFT, RDF, and MSD analyses. Quantum mechanical parameters, including EHOMO, ELUMO, dipole moment (μ), energy gap (ΔE), etc., are in good agreement with the effectiveness of inhibition performance revealing ΔE values of 3.10 and 2.75 for POX and 4-PMOX, respectively. The results obtained from this study hold significant implications for researchers aiming to design more efficient organic inhibitors to combat metal corrosion.

Corrosion Mitigation Performance of N80 Steel in 5% Sulfamic Acid Medium by Applying Novel Tetrahydro-1,2,4-triazines Including Triazene Moieties: Electrochemical and Theoretical Approaches

We observed our newly developed tetrahydro-1,2,4-triazines, including triazene moieties (THTA), namely, 6-((1E)-1-((2E)-(4-(((Z)-1-(2,4-diphenyl-2,3,4,5-tetrahydro-1,2,4-triazin-5-yl) ethylidene) triaz-1-en-1-yl)piperazin-1-yl) triaz-2-en-1-ylidene) ethyl)-2,4-diphenyl-2,3,4,5-tetrahydro-1,2,4-triazine (THTA-I), and 1-((E)-((E)-1-(2,4-diphenyl-2,3,4,5-tetrahydro-1,2,4-triazin-6-yl) ethylidene) triaz-1-en-1-yl) naphthalen-2-ol (THTA-II), as effective inhibitors for the corrosion protection of N80 carbon steel metal in 5% sulfamic acid as the corrosive medium via electrochemical approaches such as potentiodynamic polarization and electrochemical impedance spectroscopy. Furthermore, the tested steel exterior was monitored using X-ray photoelectron spectroscopy after the treatment with the investigated components to verify the establishment of the adsorbed shielding film. The investigated compounds acted as mixed-type inhibitors, as shown by Tafel diagrams. The compounds considered obey the Langmuir adsorption isotherm, and their adsorption on the steel surface was chemisorption. When the tested inhibitors were added, the double-layer capacitances, which can be determined by the adsorption of the tested inhibitors on N80 steel specimens, decreased compared with that of the blank solution. At 10^-4 M, the inhibitory efficacy of THTA-I and THTA-II achieved maximum values of 88.5 and 86.5%, respectively. Density-functional theory computations and Monte-Carlo simulation were applied to determine the adsorption attributes and inhibition mechanism through the studied components. Furthermore, the investigated inhibitors were considered to adsorb on the Fe (1 1 0) surface. The adsorption energy was then measured on steel specimens.

Synthesis and Characterization of Zn-Organic Frameworks Containing Chitosan as a Low-Cost Inhibitor for Sulfuric-Acid-Induced Steel Corrosion: Practical and Computational Exploration

In this work, a Zn-benzenetricarboxylic acid (Zn@H3BTC) organic framework coated with a dispersed layer of chitosan (CH/Zn@H3BTC) was synthesized using a solvothermal approach. The synthesized CH/Zn@H3BTC was characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), thermal gravimetric analysis (TGA), and Brunauer, Emmett, and Teller (BET) surface area. The microscopic observation and the analysis of the BET surface area of CH/Zn@H3BTC nanocomposites indicated that chitosan plays an important role in controlling the surface morphology and surface properties of the Zn@H3BTC. The obtained findings showed that the surface area and particle size diameter were in the range of 80 m2 g-1 and 800 nm, respectively. The corrosion protection characteristics of the CH/Zn@H3BTC composite in comparison to pristine chitosan on duplex steel in 2.0 M H2SO4 medium determined by electrochemical (E vs. time, PDP, and EIS) approaches exhibited that the entire charge transfer resistance of the chitosan- and CH/Zn@H3BTC-composite-protected films on the duplex steel substrate was comparatively large, at 252.4 and 364.8 Ω cm2 with protection capacities of 94.1% and 97.8%, respectively, in comparison to the unprotected metal surface (Rp = 20.6 Ω cm2), indicating the films efficiently protected the metal from corrosion. After dipping the uninhabited and protected systems, the surface topographies of the duplex steel were inspected by FESEM. We found the adsorption of the CH/Zn@H3BTC composite on the metal interface obeys the model of the Langmuir isotherm. The CH/Zn@H3BTC composite revealed outstanding adsorption on the metal interface as established by MD simulations and DFT calculations. Consequently, we found that the designed CH/Zn@H3BTC composite shows potential as an applicant inhibitor for steel protection.

Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium

Thiophene derivatives, namely (E)-thiophene-2-carbaldehyde oxime (OXM) and (E)-5-(thiophen-2-yl)-1H-tetrazole (TET), were synthesized and characterized via¹H and ¹³C NMR. Furthermore, their inhibitory property for AA2024-T3 in 1 M HCl solution was investigated via electrochemical impedance spectroscopy and potentiodynamic polarization at 293 K, together with DFT/B3LYP-based calculations. Numerous global and local descriptors of reactivity such as EHOMO, ELUMO, energy gap, electronegativity (χ), hardness (η), and frontier molecular orbital repartitions were investigated to describe the reactivity of each molecule. Alternatively, Monte Carlo simulations were performed under the solvation condition on the Al (111) surface to understand the adsorption behavior of the as-studied inhibitors deeply. The inhibition efficiency increased with an increase in the inhibitor concentration, achieving maximum values of 94.0% and 96% at 10⁻³ M, respectively. The polarization curves showed that the examined compounds act as mixed-type inhibitors. In addition, the adsorption of these compounds obeyed the Al Awady, Flory-Huggins and Temkin isotherms. The surface characterization analysis via SEM/EDX confirmed the presence of a barrier layer covering the aluminum surface. The experimental inhibition efficiencies were correlated with global descriptors, which confirmed that this theoretical study is useful for the protection of aluminum alloy metal in an acidic medium.

Thiophene derivatives: thiophene-2-carbaldehyde oxime (OXM) and 5-(thiophen-2-yl)-1H-tetrazole (TET), were synthesized and characterized. Furthermore, their inhibitory property for AA2024-T3 in 1 M HCl solution was investigated via electrochemical and with theoretical study.

HR-SEM and FT-IR dataset for green corrosion inhibition activity of 4-{[4-(pyridin-2-yl)piperazin-1-yl]methyl}aniline at CO2 atmosphere

Mild steel (MS) corrosion inhibiting aptitude of 4-{[4-(pyridin-2-yl)piperazin-1-yl]methyl}aniline (PPMA), is presented [1], [2], [3] in this data set. Explorations of synthesized PPMA are carried out by FT-IR spectral analysis, nuclear magnetic resonance (NMR) and high resolution scanning electron microscopy (HR-SEM). The inhibition activity is investigated by potentio-dynamic method. The FT-IR and NMR results revealed that structure. These data sets are ideal tool for the applications like physical and chemical-engineering field.

Preparation, Characterization, and Evaluation of Macrocrystalline and Nanocrystalline Cellulose as Potential Corrosion Inhibitors for SS316 Alloy during Acid Pickling Process: Experimental and Computational Methods

Converting low-cost bio-plant residuals into high-value reusable nanomaterials such as microcrystalline cellulose is an important technological and environmental challenge. In this report, nanocrystalline cellulose (NCC) was prepared by acid hydrolysis of macrocrystalline cellulose (CEL). The newly synthesized nanomaterials were fully characterized using spectroscopic and microscopic techniques including FE-SEM, FT-IR, TEM, Raman spectroscopy, and BET surface area. Morphological portrayal showed the rod-shaped structure for NCC with an average diameter of 10-25 nm in thickness as well as length 100-200 nm. The BET surface area of pure CEL and NCC was found to be 10.41 and 27 m2/g, respectively. The comparative protection capacity of natural polymers CEL and NCC towards improving the SS316 alloy corrosion resistance has been assessed during the acid pickling process by electrochemical (OCP, PDP, and EIS), and weight loss (WL) measurements. The outcomes attained from the various empirical methods were matched and exhibited that the protective efficacy of these polymers augmented with the upsurge in dose in this order CEL (93.1%) < NCC (96.3%). The examined polymers display mixed-corrosion inhibition type features by hindering the active centers on the metal interface, and their adsorption followed the Langmuir isotherm model. Surface morphology analyses by SEM reinforced the adsorption of polymers on the metal substrate. The Density Functional Theory (DFT) parameters were intended and exhibited the anti-corrosive characteristics of CEL and NCC polymers. A Monte Carlo (MC) simulation study revealed that CEL and NCC polymers are resolutely adsorbed on the SS316 alloy surface and forming a powerful adsorbed protective layer.

Synthesis and structures of divalent Co, Ni, Zn and Cd complexes of mixed dichalcogen and dipnictogen ligands with corrosion inhibition properties: experimental and computational studies

The structural and corrosion inhibition properties of four different transition-metal complexes of heteroleptic S-donor atom dithiophosphonate and N-donor atom phenanthroline ligands are reported. Full structural characterization of the Co, Ni, Zn and Cd complexes was achieved with the aid of single-crystal X-ray crystallography. Structural elucidation revealed the formation of a 4-coordinate Zn(ii) complex, and 6-coordinate Ni(ii) and Cd(ii), as well as a novel dithiophosphonato Co(ii) complex. The ability of the complexes with this ligand type to act as inhibitors of mild steel corrosion in 1 M HCl solution is reported for the first time. Corrosion inhibition potentials of the complexes were assessed using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and density functional theory (DFT). The open circuit potential (OCP) time profile showed the system achieved a steady-state potential before the first 600 s after submerging the working electrode in the corrosive medium. The studied metal complexes are good inhibitors of mild steel corrosion in 1 M HCl and were found to retard the corrosion rate by forming an adsorbed pseudocapacitive film on the steel surface. The order of inhibition efficiencies was in the order Ni (94.14%) > Cd (92.28%) > Zn (91.14%) > Co (72.53%).