MWCNTs-Fe3O4 nanocomposite for Hg(II) high adsorption efficiency

Efficient Removal of Mercury from Wastewater Solutions by a Nitrogen-Doped Hyper-Crosslinked Polyamine

Mercury, a highly toxic metal and pollutant, poses a significant risk to human health and the environment. This study describes the synthesis of a new nitrogen-doped heteroaromatic hyper-crosslinked polyamine (HCPA) via the polycondensation of 2,6-diaminopyrazine and tris(4-formylphenyl)amine for the efficient removal of mercury ions from aqueous solutions. The HCPA polymer was characterized by solid-state 13C-NMR and FT-IR spectroscopy. A powder X-ray diffraction and thermogravimetric analysis showed that the polymer was semicrystalline in nature and stable up to 500 °C. Adsorption isotherms indicated that mercury adsorption occurred via mono- and multilayer adsorption by HCPA, as depicted by the Langmuir, Freundlich, and Redlich-Peterson isotherm models, with a maximum adsorption capacity of qm = 333.3 mg/g. Adsorption kinetic models suggested that the adsorption process was fast and effective, reaching equilibrium within 20 min. Thermodynamics of the adsorption process revealed that it was endothermic and spontaneous in nature due to the positive ΔH0 of 48 kJ/mol and negative ΔG0 values of -4.5 kJ/mol at 293 K. Wastewater treatment revealed 98% removal of mercury indicating the selective nature of HCPA. Finally, HCPA exhibited excellent performance and regeneration up to three cycles, demonstrating its great potential as an adsorbent for environmental remediation applications.

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

The presence of heavy metal ions in the environment is a long-lasting problem that requires the simultaneous detection of Hg(II) and Pb(II) which is both vital and challenging. This present study examines a simplified and effective approach for synthesizing multi-walled carbon nanotube-copper manganese oxide (MWCNT-CuMn2O4) and multi-walled carbon nanotube-zinc manganese oxide (MWCNT-ZnMn2O4) nanocomposites for electrochemical detection of heavy metal ions. The nanocomposites MWCNT-CuMn2O4 and MWCNT-ZnMn2O4 exceptional electrochemical performance was evaluated using Square Wave Anodic Stripping Voltammetry (SWASV). The fabricated MWCNT-ZnMn2O4 demonstrated lower values of Electrochemical Impedance Spectroscopy (EIS) with charge transfer resistance (Rct) of approximately 34.13 Ω. Remarkably, the MWCNT-ZnMn2O4 electrochemical sensor exhibited the widest linear ranges of 0.5-10 μM with sensitive detection limits (0.011 μM for Hg(II) and 0.014 μM for Pb(II)). Interestingly, the MWCNT-ZnMn2O4 sensor showed excellent capability in detecting Hg(II) and Pb(II) in real water samples with a recovery percentage of 94.1% and 91.3%. Overall, the MWCNT-ZnMn2O4 modified GCE showcased superior selectivity, sensitivity, reproducibility, stability, and repeatability.

Frankincense-Based Functionalized Multiwalled Carbon Nanotubes with Iron Oxide Composites for Efficient Removal of Crystal Violet: Kinetic and Equilibrium Analysis

In this study, novel adsorbents were developed by functionalizing multiwalled carbon nanotubes with frankincense (Fr-fMWCNT) and adding iron oxide (Fe3O4) to the adsorbent (Fr-fMWCNT-Fe3O4). The morphology, surface characteristics, and chemical nature of the synthesized samples were analyzed by using various characterization techniques. The prepared adsorbents were then applied for the elimination of the toxic dye, crystal violet (CV), from water-based solutions by employing a batch adsorption method. The effectiveness of materials for the adsorption of CV was investigated by tuning various effective experimental parameters (adsorbent dosage, dye quantity, pH, and contact time). In order to derive adsorption isotherms, the Langmuir and Freundlich adsorption models were investigated and compared. The Fr-fMWCNT and Fr-fMWCNT-Fe3O4 were found to remove 85 and 95% of the CV dye within 30 min of the adsorption experiment at pH 6, respectively. It was found that a pseudo-second-order reaction rate was consistent with the experimental adsorption kinetics. The equilibrium data demonstrated that the Langmuir model adequately explained the adsorption behavior of the CV dye on the Fr-fMWCNT and Fr-fMWCNT-Fe3O4 surfaces, respectively. According to the Langmuir study, the highest adsorption capacities of the dye are 434 mg/g for Fr-fMWCNT and 500 mg/g for Fr-fMWCNT-Fe3O4. Remediation of the CV dye using our novel composite materials has not been reported previously in the literature. The synthesized Fr-fMWCNT and Fr-fMWCNT-Fe3O4 adsorbents can be economical and green materials for the adsorptive elimination of CV dye from wastewater.

State-of-the-art adsorption and adsorptive filtration based technologies for the removal of trace elements: A critical review

Water and wastewater are contaminated with various types of trace elements that are released from industrial activities. Their presence, at concentrations above the permissible limit, will cause severe negative impacts on human health and the environment. Due to their cost-effectiveness, simple design, high efficiency, and selectivity, adsorption, and adsorptive filtration are techniques that have received lots of attention as compared to other water treatment techniques. Adsorption isotherms and kinetic studies help to understand the mechanisms of adsorption and adsorption rates, which can be used to develop and optimize different adsorbents. This state-of-the-art review provides and combines the advancements in different conventional and advanced adsorbents, biosorbents, and adsorptive membranes for the removal of trace elements from water streams. Herein, this review discusses the sources of different trace elements and their impact on human health. The review also covers the adsorption technique with a focus on various advanced adsorbents, their adsorption capacities, and adsorption isotherm modeling in detail. In addition, biosorption is critically discussed together with its mechanisms and biosorption isotherms. In the end, the application of various advanced adsorptive membranes is discussed and their comparison with adsorbents and biosorbents is systematically presented.

Multifunctional cobalt oxide nanocomposites for efficient removal of heavy metals from aqueous solutions

In this study, co-precipitation synthesis of natural clay (NC) with Co₃O₄ nanoparticles (NPs) is carried out to elaborate the super NC@Co₃O₄ nanocomposites with admirable salinity confrontation, environmental stability and reusability, to eliminate heavy metal pollution such as toxic Pb(II) and Cd(II) ions. The advantages of using the NC@Co₃O₄ adsorbent are easy synthesis and biocompatibility. In addition, NC@Co₃O₄ can keep an excellent adsorption capacity by taking into account various environmental parameters such as the pH solution, NC@Co₃O₄ dose, adsorption process time and the initial heavy metals concentration. Furthermore, FTIR, XRD, TGA, SEM-EDS, TEM and AFM analyses were performed to confirm NC@Co₃O₄ nanocomposites synthesis and characterisation. The adsorption efficiencies of Pb(II) and Cd(II) ions by NC@Co₃O₄ nanocomposites were demonstrated to be up to 86.89% and 82.06% respectively. Regarding the adsorption from water onto the NC@Co₃O₄ nanocomposites, kinetics data were well fitted with PSO kinetic model, whereas a good agreement was found between the equilibrium adsorption and theoretical Langmuir isotherm model leading to maximum adsorption capacities of 55.24 and 52.91 mg/g, for Pb(II) and Cd(II) respectively. Monte Carlo (MC) simulations confirmed the spontaneous of this adsorption based on the negative values of E_ads. The MC simulations were performed to highlight the interactions occurring between heavy metal ions and the surface of NC@Co₃O₄ nanocomposites, these were well correlated with the experimental results. Overall the study showed that NC@Co₃O₄ nanoadsorbents have strongly versatile applications and are well designed for pollutant removal from wastewater due to their unique adsorptive properties.

Study on adsorption of hexavalent chromium by composite material prepared from iron-based solid wastes

A new adsorbent with chromium removal function was synthesized by carbon thermal method using iron-containing waste Fenton sludge and carbon-containing solid waste fly ash to treat high pH scoring wastewater generated from industrial processes. The results showed that the adsorbent used T = 273.15 K, pH = 10, t = 1200 min, C₀ = 100 mg/L, had a removal rate of Cr(VI) of more than 80%, and the adsorption capacity could reach 393.79 mg/g. The characterization results show that the synthesized mesoporous nitrogen-doped composite material has a large specific surface area and mesoporous structure, and the surface of the material is rich in oxygen-containing functional groups and active sites. Compared with other studies, the adsorption capacity of the material is larger, which indicates that the removal effect of Cr(VI) in this study is better. The adsorption kinetic results show that the adsorption follows a pseudo second kinetic model, and the adsorption process is a chemisorption involving electron sharing or electron exchange. This experiment designed a simple method to synthesize mesoporous nitrogen-doped composites using industrial solid waste, with raw materials from cheap and easily available industrial solid waste, and solved the dual problems of heavy metals in wastewater and solid waste, providing a new idea for the resource utilization of Fenton sludge while not producing secondary pollution.

Selective removal of Hg(II) by UiO-66-NH2 modified by 4-quinolinecarboxaldehyde: from experiment to mechanism

In wastewater, heavy metal Hg causes serious harm to ecology, so it needs to be removed. In this paper, a novel MOF adsorbent (UiO-66-QU) was prepared by modifying UiO-66-NH₂ with 4-quinolinecarboxaldehyde, which was used to selectively remove Hg(II) from water. The adsorbent was characterized using Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), zeta potentiometer, and X-ray photoelectron spectroscopy (XPS). In order to investigate the Hg(II) adsorption performance of UiO-66-QU, the effect of time, initial concentration, pH, and temperature were carried out. Langmuir model fitting shows that the maximum adsorption capacity of UiO-66-QU for Hg(II) is 556 mg/g at 298 K. The experimental results show that UiO-66-QU has better Hg(II) adsorption capacity than UiO-66-NH₂. The isotherm is in accordance with pseudo-second-order models. It is indicated that the adsorption process is mainly monolayer chemical adsorption. The thermodynamic parameters also indicate that the adsorption process is spontaneous and endothermic. It has excellent reusability and selectivity. XPS and the zeta potential showed that the adsorption mechanism was the complex reaction of Hg(II) with nitrogenous group. Therefore, the adsorbent has potential application prospects in removal of Hg(II) from wastewater.

High-efficiency Hg(II) adsorbent: FeS loaded on a carbon black from pyrolysis of waste tires and sequential reutilization as a photocatalyst

Iron-sulfur nano compounds have been proven to be effective in mercury removal, but the agglomeration, poor dispersion and mobility, and easy oxidation challenges limit their application. Herein, carbon black originating from pyrolysis of waste tires was used as a carrier of nano-FeS to obtain an efficient adsorbent (C@PDA-FeS). It is found that the C@PDA-FeS shows outstanding adsorption ability, excellent selectivity, and high removal rate. A maximum adsorption capacity of 1754 mg/g is obtained, and the residual Hg(II) ion concentration is as low as 3.2 μg/L in the simulated industrial wastewater, which meets the industrial discharge standard under the optimal conditions. Meanwhile, the removal rate of Hg(II) ion can reach 99.8% after up to 10 cycles. More importantly, the C@PDA-FeS still shows good adsorption efficiency, and the removal rate of Hg(II) ion is over 99% (25 mg/L Hg(II) concentration) after 90 days of storage, demonstrating the long-term stability and promising future of the adsorbent. In addition, the waste adsorbent (C@PDA-FeS/HgS) is reused as a photocatalyst to degrade methylene blue, and the corresponding degradation rate is 92.9% (10 mg/L).

Photocatalytic Performance Improvement by Doping Ag on ZnO/MWCNTs Nanocomposite Prepared with Pulsed Laser Ablation Method Based Photocatalysts Degrading Rhodamine B Organic Pollutant Dye

ZnO/MWCNTs nanocomposite has significant potential in photocatalytic and environmental treatment. Unfortunately, its photocatalytic efficacy is not high enough due to its poor light absorbance and quick recombination of photo-generated carriers, which might be improved by incorporation with noble metal nanoparticles. Herein, Ag-doped ZnO/MWCNTs nanocomposite was prepared using a pulsed laser ablation approach in the liquid media and examined as a degradable catalyst for Rhodamine B. (RhB). Different techniques were used to confirm the formation of the nanostructured materials (ZnO and Ag) and the complete interaction between them and MWCNTs. X-ray diffraction pattern revealed the hexagonal wurtzite crystal structure of ZnO and Ag. Additionally, UV-visible absorption spectrum was used to study the change throughout the shift in the transition energies, which affected the photocatalytic degradation. Furthermore, the morphological investigation by a scanning electron microscope showed the successful embedding and decoration of ZnO and Ag on the outer surface of CNTs. Moreover, the oxidation state of the formed final nanocomposite was investigated via an X-ray photoelectron spectrometer. After that, the photocatalytic degradations of RhB were tested using the prepared catalysts. The results showed that utilizing Ag significantly impacted the photo degradation of RhB by lowering the charge carrier recombination, leading to 95% photocatalytic degradation after 12 min. The enhanced photocatalytic performance of the produced nanocomposite was attributed to the role of the Ag dopant in generating more active oxygen species. Moreover, the impacts of the catalyst amount, pH level, and contact time were discussed.

Taguchi L25 (54) Approach for Methylene Blue Removal by Polyethylene Terephthalate Nanofiber-Multi-Walled Carbon Nanotube Composite

A membrane composed of polyethylene terephthalate nanofiber and multi-walled carbon nanotubes (PET NF-MWCNTs) composite is used to adsorb methylene blue (MB) dye from an aqueous solution. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques are employed to study the surface properties of the adsorbent. Several parameters affecting dye adsorption (pH, MB dye initial concentration, PET NF-MWCNTs dose, and contact time) are optimized for optimal removal efficiency (R, %) by using the Taguchi L25 (54) Orthogonal Array approach. According to the ANOVA results, pH has the highest contributing percentage at 71.01%, suggesting it has the most significant impact on removal efficiency. The adsorbent dose is the second most affected (12.08%), followed by the MB dye initial concentration of 5.91%, and the least affected is the contact time (1.81%). In addition, experimental findings confirm that the Langmuir isotherm is well-fitted, suggesting a monolayer capping of MB dye on the PET-NF-MWCNT surface with a maximum adsorption capacity of 7.047 mg g−1. Also, the kinetic results are well-suited to the pseudo-second-order model. There is a good agreement between the calculated (qe) and experimental values for the pseudo-second-order kinetic model.

Application of MXenes for water treatment and energy-efficient desalination: A review

MXenes are a new type of two-dimensional (2D) material which are rapidly gaining traction for a range of environmental, chemical and medical applications. MXenes and MXene-composites exhibit high surface area, superlative chemical stability, thermal conductivity, hydrophilicity and are environmentally compatible. Consequently, MXenes have been successfully employed for hydrogen storage, semiconductor manufacture and lithium ion batteries. In recent years, MXenes have been utilized in numerous environmental applications for treating contaminated surface waters, ground and industrial/ municipal wastewaters and for desalination, often outperforming conventional materials in each field. MXene-composites can adsorb multiple organic and inorganic contaminants, and undergo Faradaic capacitive deionization (CDI) when utilized for electrochemical applications. This approach allows for a significant decrease in the energy demand by overcoming the concentration polarization limitation of conventional CDI electrodes, offering a solution for low-energy desalination of brackish waters. This article presents a state-of-the-art review on water treatment and desalination applications of MXenes and MXene-composites. An investigation into the kinetics and isotherms is presented, as well as the impact of water constituents and operating conditions are also discussed. The applications of MXenes for CDI, pervaporation desalination and solar thermal desalination are also examined based on the reviewed literature. The effects of the water composition and operational protocols on the regeneration efficacy and long-term usage are also highlighted.

Application of Activated Carbon Banana Peel Coated with Al2O3-Chitosan for the Adsorptive Removal of Lead and Cadmium from Wastewater

This study was aimed at evaluating the adsorption capacity of novel banana peel activated carbon (BPAC) modified with Al₃O₂@chitosan for the removal of cadmium (Cd²⁺) and lead (Pb²⁺) from wastewater. Characterization techniques such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transformed infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller analysis confirmed the synthesized BPAC@Al₃O₂@chitosan composite material. The univariate approach was used to study the influence of different experimental parameters (such as adsorbent mass, sample pH, and contact time) that affects simultaneous removal of Cd²⁺ and Pb²⁺ ions. Kinetic results showed that adsorption favored the pseudo-second-order kinetic model, whereas the adsorption of Cd²⁺ and Pb²⁺ was best described by the Langmuir model and the adsorption capacity for Cd²⁺ and Pb²⁺ was 46.9 mg g^-1 and 57.1 mg g^-1, respectively, for monolayer adsorption. It was shown the BPAC composite can be re-used until the third cycle of adsorption-desorption (% Re > 80). Based on the obtained results, it can be concluded that the prepared BPAC@Al₃O₂@chitosan composite material is cost effective, as it is generated from waste banana peels and can be re-used. In addition, the prepared material was able to remove Cd²⁺ and Pb²⁺ up to 99.9%.

Detection and remediation of mercury contaminated environment by nanotechnology: Progress and challenges

Hg pollution is a global concern due to its high ecotoxicity and health risk to human beings. A comprehensive understanding of the fast-developed technology applied in determining and controlling Hg pollution is beneficial for risk assessment and field remediation. Herein, we mainly assembled the recent progress on Hg treatment in the environment by nanotechnology. The advantages and disadvantages of the conventional and nanotechnology-based methods commonly used in water-/soil-Hg remediation were compared and summarized. Specifically, green nanomaterials derived from plant tissues (e.g., nanocellulose) have prominent merits in remediation of Hg contaminated environments, including high efficiency in Hg removal, low cost, environment-friendly, and easily degradable. Based on the theories of Hg biogeochemistry and existed researches, four promising pathways are proposed, 1) developing surface-modified green nanocellulose with high selectivity and affinity towards Hg; 2) designing effective dispersants in preventing nanocellulose from agglomeration in soil; 3) mediating soil properties by adding green nanomaterials-based fertilizers; 4) improving plant-Hg-extract capacity with green nanomaterials addition. Briefly, more efficient and available approaches are still expected to be developed and implemented in the natural environment for Hg remediation.

Low-Cost and Eco-Friendly Hydroxyapatite Nanoparticles Derived from Eggshell Waste for Cephalexin Removal

This work describes the hydroxyapatite nanoparticle (HAP) preparation from eggshell waste and their application as an adsorbent for Cephalexin (Ceph) antibiotic removal from aqueous solutions. Chemical precipitation with phosphoric acid was used to evaluate the feasibility of calcium oxide for HAP preparation. The structural properties of HAP were characterized by X-ray diffraction, which revealed the formation of the hydroxyapatite crystalline phase formation. In addition, transmitting electron spectroscopy showed an irregular shape with a variation in size. The impact of various experimental conditions on the removal efficiency such as the solution’s pH, contact time, HAP mass, solution temperature, and Ceph concentration were studied. Experimental data showed that HAP could remove most Ceph species from aqueous solutions within 1 h at pH = 7 with 70.70% adsorption efficiency utilizing 50 mg of the HAP. The removal process of Ceph species by HAP was kinetically investigated using various kinetic models, and the results showed the suitability of the pseudo-second-order kinetic model for the adsorption process description. Moreover, the removal process was thermodynamically investigated; the results showed that the removal was spontaneous endothermic and related to the randomness increase. The data confirmed that HAP had high efficiency in removing Ceph antibiotics from an aqueous solution.

Metal-organic frameworks (MOFs) based nanofiber architectures for the removal of heavy metal ions

Environmental heavy metal ions (HMIs) accumulate in living organisms and cause various diseases. Metal-organic frameworks (MOFs) have proven to be promising and effective materials for removing heavy metal ions from contaminated water because of their high porosity, remarkable physical and chemical properties, and high specific surface area. MOFs are self-assembling metal ions or clusters with organic linkers. Metals are used as dowel pins to build two-dimensional or three-dimensional frameworks, and organic linkers serve as carriers. Modern research has mainly focused on designing MOFs-based materials with improved adsorption and separation properties. In this review, for the first time, an in-depth look at the use of MOFs nanofiber materials for HMIs removal applications is provided. This review will focus on the synthesis, properties, and recent advances and provide an understanding of the opportunities and challenges that will arise in the synthesis of future MOFs-nanofiber composites in this area. MOFs decorated on nanofibers possess rapid adsorption kinetics, a high adsorption capacity, excellent selectivity, and good reusability. In addition, the substantial adsorption capacities are mainly due to interactions between the target ions and functional binding groups on the MOFs-nanofiber composites and the highly ordered porous structure.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Adsorption of Hg(II) in solution by mercaptofunctionalized palygorskite

In the past 10 years, the treatment and restoration of soil and water bodies contaminated by mercury and other heavy metals have received unprecedented attention and support from China's environmental protection authorities. The search for low-cost and high-efficiency adsorbents has become one of the research hotspots in this field. In this paper, a simple and environment-friendly method was used to graft 3-mercaptopropyl trimethoxysilane on the surface of palygorskite. The synthesized mercaptofunctionalized palygorskite (M-PAL) was characterized by XRD, FT-IR, BET and SEM-EDS, respectively, and its adsorption conditions, adsorption models and thermodynamic parameters for Hg2+ were systematically investigated. The experimental results indicated that the saturated adsorption capacity of Hg2+ on the M-PAL could reach 203.4 mg·g-1, within 120 min at pH 4 and 298 K. By analyzing the experimental data of adsorption kinetics and thermodynamics, it was found that the adsorption process of Hg2+ conformed to the pseudo-second-order kinetic model, which belonged to chemical adsorption of the rate-controlled step; the Langmuir model better described the adsorption isotherm. The thermodynamic parameters obtained (ΔH=29.95 kJ·mol-1, ΔS=103.09 J·mol-1·K-1 and ΔG<0) show that the whole process is a spontaneous endothermic process. When the concentration of Na+, K+, Ca2+, Mg2+, Cl-, NO3-, H2C2O4 and C6H8O7 was 200 times that of Hg2+, although these organic acids had a slightly greater effect on the adsorption of Hg2+ on mercaptofunctionalized palygorskite than inorganic ions, the adsorption capacity remained above 185 mg·g-1. The adsorption products could be still stable in simulated acid rain with pH 3, 4, 5, 6, 7 and oxalic acid solution with concentration of 1, 2, 3, 4 and 5 mmol·L-1, and the desorption rates were about 3%. Through XPS analysis, the specific coordination of Hg2+ with the S atom on the surface of M-PAL was confirmed.

Diethylenetriaminepentaacetic acid-thiourea-modified magnetic chitosan for adsorption of hexavalent chromium from aqueous solutions

Chromium pollution is a serious environmental problem given that like most heavy metals, Cr tends to persist and accumulate in the environment. In this study, diethylenetriaminepentaacetic acid-thiourea-modified magnetic chitosan (DTCS-Fe₃O₄) was synthesized for use as an adsorbent for Cr(VI) removal from aqueous solutions. The effects of various treatment conditions on the Cr(VI) adsorption performance of DTCS-Fe₃O₄ composite as well as the kinetics were elucidated. Moreover, by observing the structure and morphology of DTCS-Fe₃O₄, the possible Cr(VI) adsorption mechanism was proposed. DTCS-Fe₃O₄ exhibited a maximum adsorption capacity of 321.3 ± 6.0 mg g^-1. Further, the adsorption process, which followed the Langmuir model for monolayer adsorption, was predominantly governed by chemical adsorption, and could be fitted using the pseudo-second-order kinetics model. Furthermore, given its ease of preparation, low cost, and remarkable performance, it is expected that the DTCS-Fe₃O₄ composite would find wide practical application in the removal of toxic Cr(VI) from wastewater.

Recent advances in dye and metal ion removal using efficient adsorbents and novel nano-based materials: an overview

Excessive levels of dyes and heavy metals in water sources have long been a source of concern, posing significant environmental and public health threats. However, adsorption is a feasible technique for removing dye contaminants and heavy metals from water due to its high efficiency, cost-effectiveness, and easy operation. Numerous researchers in batch studies extensively evaluated various adsorbents such as natural materials, and agriculture-derived and industrial wastes; however, large-scale application is still missing. Nanotechnology is a novel approach that has arisen as one of the most versatile and cost-effective ways for dye and heavy metal removal. Its promotion on large-scale applications to investigate technological, fiscal, and environmental aspects for wastewater decontamination is particularly important. This review critically reviews wastewater treatment techniques, emphasizing the adsorption process and highlighting the most effective parameters: solution pH, adsorbent dosage, adsorbent particle size, initial concentration, contact time, and temperature. In addition, a comprehensive, up-to-date list of potentially effective low-cost adsorbents and nano-sorbents for the removal of dyes and heavy metals has been compiled. Finally, the challenges towards the practical application of the adsorption process based on various adsorbents have been drawn from the literature reviewed, and our suggested future perspectives are proposed.

Recent Advances of Nanoremediation Technologies for Soil and Groundwater Remediation: A Review

Nanotechnology has been widely used in many fields including in soil and groundwater remediation. Nanoremediation has emerged as an effective, rapid, and efficient technology for soil and groundwater contaminated with petroleum pollutants and heavy metals. This review provides an overview of the application of nanomaterials for environmental cleanup, such as soil and groundwater remediation. Four types of nanomaterials, namely nanoscale zero-valent iron (nZVI), carbon nanotubes (CNTs), and metallic and magnetic nanoparticles (MNPs), are presented and discussed. In addition, the potential environmental risks of the nanomaterial application in soil remediation are highlighted. Moreover, this review provides insight into the combination of nanoremediation with other remediation technologies. The study demonstrates that nZVI had been widely studied for high-efficiency environmental remediation due to its high reactivity and excellent contaminant immobilization capability. CNTs have received more attention for remediation of organic and inorganic contaminants because of their unique adsorption characteristics. Environmental remediations using metal and MNPs are also favorable due to their facile magnetic separation and unique metal-ion adsorption. The modified nZVI showed less toxicity towards soil bacteria than bare nZVI; thus, modifying or coating nZVI could reduce its ecotoxicity. The combination of nanoremediation with other remediation technology is shown to be a valuable soil remediation technique as the synergetic effects may increase the sustainability of the applied process towards green technology for soil remediation.

Green Synthesized of Ag/Ag2O Nanoparticles Using Aqueous Leaves Extracts of Phoenix dactylifera L. and Their Azo Dye Photodegradation

In this study, silver/silver oxide nanoparticles (Ag/Ag2O NPs) were successfully biosynthesized using Phoenix dactylifera L. aqueous leaves extract. The effect of different plant extract/precursor contractions (volume ratio, v/v%) on Ag/Ag2O NP formation, their optical properties, and photocatalytic activity towards azo dye degradation, i.e., Congo red (CR) and methylene blue (MB), were investigated. X-ray diffraction confirmed the crystalline nature of Ag/Ag2O NPs with a crystallite size range from 28 to 39 nm. Scanning electron microscope images showed that the Ag/Ag2O NPs have an oval and spherical shape. UV-vis spectroscopy showed that Ag/Ag2O NPs have a direct bandgap of 2.07-2.86 eV and an indirect bandgap of 1.60-1.76 eV. Fourier transform infrared analysis suggests that the synthesized Ag/Ag2O NPs might be stabilized through the interactions of -OH and C=O groups in the carbohydrates, flavonoids, tannins, and phenolic acids present in Phoenix dactylifera L. Interestingly, the prepared Ag/Ag2O NPs showed high catalytic degradation activity for CR dye. The photocatalytic degradation of the azo dye was monitored spectrophotometrically in a wavelength range of 250-900 nm, and a high decolorization efficiency (84.50%) was obtained after 50 min of reaction. As a result, the use of Phoenix dactylifera L. aqueous leaves extract offers a cost-effective and eco-friendly method.

Corn bracts loading copper sulfide for rapid adsorption of Hg(II) and sequential efficient reuse as a photocatalyst

Hg(II) ions in wastewater are highly toxic to the environment and human health, yet many materials to remove the ions exhibit lower adsorption efficiency, and few studies report the reuse of Hg(II)-loaded waste materials. Here, a cheap and efficient adsorbent was prepared for the removal of Hg(II) based on corn bracts (CB) loading copper sulfide (CuS), and the Hg(II)-adsorbed material was reused as a photocatalyst. By changing the adsorption variables such as pH, adsorbent dosage, Hg(II) concentration, contact time and coexisting ions, the optimum adsorption conditions were obtained. The study indicated the adsorption capacity and removal rate of CB/CuS reached 249.58 mg/g and 99.83% at pH 6 with 20 mg CB/CuS, 50 mL Hg(II) concentration (100 mg/L) and 60 min, and coexisting ions did not affect the uptake of Hg(II). The adsorption behavior of CB/CuS toward Hg(II) followed pseudo-second-order and Langmuir models, with the theoretical maximum adsorption capacity of 316.46 mg/g. Finally, we explored an alternative strategy to dispose of spent adsorbents by converting the CB/CuS/HgS into a photocatalyst for the degradation of rhodamine B, with a removal rate of 98%. Overall, this work not only develops a promising material for the treatment of Hg(II)-containing wastewater, but opens up a new approach for the use of the waste adsorbent.

Electrochemical sensor based on magnetic nanohybrids of multiple phthalocyanine doped ferrites/CMWCNTs for detection of rosmarinic acid

Ferrites have attracted considerable attention in biosensor developments owing to their favorable electrochemical and magnetic properties. Speedy and trace analysis can be succeeded by the sensors based on magnetic nanohybrids. In this work, we reported a novel method for one-step synthesis of magnetic ferrites composed of Fe and phthalocyanine. After hybridization with carbonylated multi wall carbon nanotubes, a sensor based on Fe3O4-Pc-CMWCNTs nanocomposites was fabricated for the detection of rosmarinic acid (RA), a bioactive phytochemical. The sensor can be constructed within 30s without any complicated process. A comparison of electrochemical activity between ZnFe2O4-Pc-CMWCNTs and Fe3O4-Pc-CMWCNTs nanohybrids also has been accomplished in this work. Compared with ZnFe2O4-Pc-CMWCNTs based on commonly used ferrites, Fe3O4-Pc-CMWCNTs/MGCE exhibited a higher catalytical ability for the detection of RA. The sensor modified with Fe3O4-Pc-CMWCNTs displayed a low LOD of 0.182 μM with a wide linear range from 0.2 to 400 μM, which was 30 times more sensitive than the one based on ZnFe2O4-Pc-CMWCNTs. The obtained sensor also owned an excellent selectivity, reproducibility, repeatability, and stability, which made it achieve the measurements in plant sample and human serum.

A Review on Polymer Nanocomposites and Their Effective Applications in Membranes and Adsorbents for Water Treatment and Gas Separation

Globally, environmental challenges have been recognised as a matter of concern. Among these challenges are the reduced availability and quality of drinking water, and greenhouse gases that give rise to change in climate by entrapping heat, which result in respirational illness from smog and air pollution. Globally, the rate of demand for the use of freshwater has outgrown the rate of population increase; as the rapid growth in town and cities place a huge pressure on neighbouring water resources. Besides, the rapid growth in anthropogenic activities, such as the generation of energy and its conveyance, release carbon dioxide and other greenhouse gases, warming the planet. Polymer nanocomposite has played a significant role in finding solutions to current environmental problems. It has found interest due to its high potential for the reduction of gas emission, and elimination of pollutants, heavy metals, dyes, and oil in wastewater. The revolution of integrating developed novel nanomaterials such as nanoparticles, carbon nanotubes, nanofibers and activated carbon, in polymers, have instigated revitalizing and favourable inventive nanotechnologies for the treatment of wastewater and gas separation. This review discusses the effective employment of polymer nanocomposites for environmental utilizations. Polymer nanocomposite membranes for wastewater treatment and gas separation were reviewed together with their mechanisms. The use of polymer nanocomposites as an adsorbent for toxic metals ions removal and an adsorbent for dye removal were also discussed, together with the mechanism of the adsorption process. Patents in the utilization of innovative polymeric nanocomposite membranes for environmental utilizations were discussed.

Ecotoxicological assessment of micropollutant Diclofenac biosorption on magnetic sawdust: Phyto, Microbial and Fish toxicity studies

Diclofenac (DCF), a persistent pharmaceutical micropollutant which occurs in the ecosystems causing adverse effects on aquatic as well as terrestrial organisms. In this study, magnetic sawdust (MSD) was prepared using co-precipitation method for biosorptive removal of DCF from water. The MSD was characterized using various analytical techniques like microscopic and spectroscopic analysis. Magnetometer study confirms the ferromagnetic behavior of the biosorbent which is a key advantage in the separation of MSD after biosorption. The effect of experimental parameters was optimized in batch mode with evaluated maximum efficiency of 86.12 % at pH 6, biosorbent dosage 25 mg for 50 mg/L of DCF. Ecotoxicological assessment has been performed for the treated and untreated sample using plant seeds, microbes and zebra fish to check the adverse effects of DCF on these organisms. Evaluation of toxicity studies revealed that inhibition concentration of DCF for various seeds (60.91 mg/L to 43.11 mg/L), E. coli (48.82 μg/mL) and B. subtilis (31.55 μg/mL). The lethal concentration of DCF on the Danio rerio was found to be 156.99 mg/L. In contrast, significant increase in both the concentration measures of DCF after biosorption was observed making this biosorbent a potent alternative to other available treatment measures.

On the Suitability of Almond Shells for the Manufacture of a Natural Low-Cost Bioadsorbent to Remove Brilliant Green: Kinetics and Equilibrium Isotherms Study

Almond production generates a large number of coproducts, but the farmer's interest mainly focuses on the nutritional and commercial aspects of the kernel for getting the best return from their harvests. Thus, almond coproducts such as almond shells that represent more than 70% of biomass remain underexplored. In this work, the suitability of almond shell powder (ASP) as a natural low-cost adsorbent was evaluated in the adsorption of brilliant green dye (BG), which is known as a chemical pollutant. Brunauer-Emmett-Teller (BET) method, for the determination of specific surface area, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques were performed to characterize the ASP adsorbent. The batch adsorption kinetic study for the removal of BG dye was carried out by varying pH, temperature, initial concentration of the dye, bioadsorbent dose, and contact time. It was found that 98% of BG dye is removed under the following optimal experimental conditions: ASP bioadsorbent dose of 1 g/L at T = 25°C, pH = 6.8, and C 0 = 1 g/L, which proves that ASP can be used as an excellent low-cost bioadsorbent for the removal of BG dye from wastewater. The experimental isotherm data were analyzed using Freundlich and Langmuir models. The results show the best correlation with single-layer adsorption, and the adsorption kinetics seems to follow a pseudo-second-order model.

Use of Nanocellulose extracted from grass for adsorption abatement of Ciprofloxacin and Diclofenac removal with phyto, and fish toxicity studies

The present study deals with the adsorption of antibiotic Ciprofloxacin (CPXO) and anti-inflammatory agent Diclofenac (DCF) on Grass nanocellulose (GNC) extracted from Cyprus rotundas grass. The adsorbent GNC was characterised using various microscopic, elemental and spectroscopic analysis to monitor the physicochemical alterations of the surface before and after adsorption. The size of the converted nanocellulose was found to be 40-50 nm. The experimental measures influencing the adsorption of CPXO and DCF that were optimised are initial solution pH, GNC dosage, temperature and initial concentration of the adsorbate. Halsey isotherm model and pseudo-second order kinetic model agreed best with the experimental outcome for both the adsorbate. The maximum adsorption capacity of GNC were 227.223 and 192.307 mg/g for CPXO and DCF respectively. Phytotoxicity studies were performed using 6 different types of seeds to evaluate the effect of GNC treated effluent on plants. Similarly, acute fish toxicity on zebra fish analysis showed to have lesser mortality rate of the effluent after adsorption of CPXO and DCF on GNC.

Zerovalent nickel nanoparticles performance towards Cr(VI) adsorption in polluted water

Heavy metals are one of the most common types of pollutants in ground water due to their wide sources, non-degradability and high toxicity. Many traditional wastewater treatments were not capable of removing enough such contaminants in order to meet quality standards. Nanosized zerovalent transition metals have emerged as a great candidate for ground water remediation, due to their simplicity and low fabrication cost, furthermore they can comply with simple chemical synthesis. Here, we present the synthesis of nano zerovalent nickel (nZVN) by a simple grinding reduction method. The obtained nZVN was characterized with XRD, SEM, EDS and BET surface area. The results confirms the formation of nZVN and the active particle cluster size ranges from 100 to 200 nm. N₂ adsorption isotherms revealed that the formation mesoporous cluster of nZVN with good surface area. The adsorption of Cr(VI) using nZVN showed 96% removal efficiency for 10 ppm concentration, and even up to 98% when the temperature is slightly raised to 36 °C (309 K). The removal efficiencies of Cr by zerovalent nickel was well fitted by the Langmuir-Hinshelwood first order reaction kinetic model with deceptive rate constant values of 0.6699, 0.7956 and 1.0251 min^-1 at temperature 200, 303 and 309 K, respectively. In total, our studies suggest that nanoscale zerovalent iron is a capable material for Cr(VI) remediation from groundwater.

Effect of molecular structure on the adsorption affinity of sulfonamides onto CNTs: Batch experiments and DFT calculations

In order to investigate the adsorption behaviors of sulfonamides onto hydroxylated multi - walled carbon nanotubes (CNTs) with a porous structure and large specific surface area, six typical sulfonamides including sulfanilamide (SAM), sulfamerazine (SMR), sulfadimethoxine (SMX), sulfadiazine (SDZ), sulfamethazine (SMT) and sulfametoxydiazine (SMD) were selected to be adsorbed respectively on CNTs, and in the same time the structural parameters of the six sulfonamides molecules were calculated according to the density functional theory (DFT). Based upon above mentioned experiments and the structural parameters, the quantitative correlation between the structural parameters of sulfonamides molecules and their adsorption affinity (e.g. adsorption capacity and adsorption rate constant) onto CNTs was established, respectively. The adsorption data of sulfonamides fitted well with the pseudo - second - order kinetic model and the Langmuir isotherm model. The order of both pseudo - second - order kinetic constant and maximum adsorption capacity of the six sulfonamides were SAM < SMR < SMX < SDZ < SMT < SMD. The frontier molecular orbital energy (E_HOMO) and dipole moment (μ) could be used as indicators for the adsorption affinity of sulfonamides onto CNTs. Accordingly, the possible adsorption mechanism was proposed.

Comparative assessment of raw and acid-activated preparations of novel Pongamia pinnata shells for adsorption of hexavalent chromium from simulated wastewater

Current study deals with the comparative assessment for efficient adsorption of Cr(VI) from simulated wastewater using raw (NPP), phosphoric acid-activated (PPP) and sulphuric acid-activated (SPP) Pongamia pinnata shells. Physico-chemical alterations of the adsorbent were characterised by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), zeta-potential analysis, energy-dispersive X-ray spectroscopy (EDS) and total pore analysis using Brunauer-Emmett-Teller (BET). Parameters influencing the efficient biosorption of Cr(VI) species viz. initial pH of Cr(VI) solution, dosage of biosorbent, biosorbent-Cr(VI) contact period, initial concentration of Cr(VI) ions and reaction temperature were optimised. Various two-parameter and three-parameter isotherm models, kinetic models and thermodynamic studies were performed using equilibrium data. Langmuir adsorption capacity for NPP (raw biomass), PPP (phosphoric acid-activated biomass) and SPP (sulphuric acid-activated biomass) was found to be 96.2, 152 and 192 mg/g, respectively. All the biosorbents gave best fit for pseudo-second-order model. Thermodynamic studies suggest spontaneous and endothermic interaction with increased degree of randomness. Effect of co-existing cations and anions on Cr(VI) biosorption onto the biosorbents implied that minimal competition and the biosorption capacity of the biosorbents for Cr(VI) species remained unaffected. Regeneration studies suggest that activated biosorbents can be used up to three times with continuous desorption.

Thiol-modified biochar synthesized by a facile ball-milling method for enhanced sorption of inorganic Hg2+ and organic CH3Hg. JOURNAL OF HAZARDOUS MATERIALS 2020;384:121357. [PMID: 31630859 DOI: 10.1016/j.jhazmat.2019.121357]

Modification of thiol on biochar often demands complex synthetic procedures and chemicals. In this work, a simple and environment friendly thiol-modified biochar (BMS-biochar) was successfully synthesized by ball milling pristine biochar with 3-mercaptopropyltrimethoxysilane (3-MPTS). The resultant BMS-biochar was characterized and tested for aqueous inorganic Hg²⁺ and organic CH₃Hg⁺ removal. Characterization results showed that 3-MPTS was loaded on the surface of biochar through oxygen-containing functional groups (i.e., OH and CO) and π-π bond. Ball milling method improved the properties of BMS-biochar, namely, more efficient SH load, a larger surface area, more functional groups, more negatively charged surface, which resulted in higher removal efficiency of Hg²⁺ and CH₃Hg⁺ (320.1 mg/g for Hg²⁺ and 104.9 mg/g for CH₃Hg⁺) compared to the pristine biochar (105.7 mg/g for Hg²⁺ and 8.21 mg/g for CH₃Hg⁺) and thiol-modified biochar through chemical impregnation (CIS-biochar) (175.6 mg/g for Hg²⁺ and 58.0 mg/g for CH₃Hg⁺). Ball milling increased the sorption capacities of Hg²⁺ and CH₃Hg⁺ through surface adsorption, electrostatic attraction, ligand exchange, and surface complexation. Modeling results suggested that the surface diffusion was the rate-limiting adsorption step for BMS-biochar. This work gave prominence to the potential of ball milling for the preparation of thiol-modified biochar to remove mercury especially organic CH₃Hg⁺ by adsorption.

Design of l-Cysteine Functionalized UiO-66 MOFs for Selective Adsorption of Hg(II) in Aqueous Medium

Mercury ions can cause a series of hazards to humans and the environment, even in trace amounts. Here, we designed a novel adsorbent (Cys-UiO-66) by functionalizing NH₂-UiO-66 with l-cysteine for selective removal of Hg(II) from solution. The Cys-UiO-66 was characterized by different instruments. The adsorption property of Cys-UiO-66 was evaluated by batch methods. The maximum adsorption capacity was 350.14 mg/g at pH 5.0. Furthermore, the adsorption isotherm and kinetics models were in accord with the Langmuir and pseudo-second-order models, respectively, evidencing that the adsorption behavior was dominated by monolayer chemisorption. The Cys-UiO-66 had better affinity for Hg(II) than other coexisting ions in wastewater and could be regenerated for at least five cycles. The results prove that Cys-UiO-66 is a talented and efficient sorbent for mercury ions.

High extent mass recovery of alginate hydrogel beads network based on immobilized bio-sourced porous carbon@Fe3O4-NPs for organic pollutants uptake

This work goes inside the understanding of organic pollutants adsorption mechanism over network alginate hydrogel beads based on immobilized bio-sourced PC@Fe₃O₄-NPs (PC@Fe₃O₄-NPs@Alginate) and highlights its high extent mass recovery in aqueous media. The samples were successfully synthesized, we previously developed porous carbon (PC), which, was used to elaborate PC@Fe₃O₄-NPs via simple in situ coprecipitation (PC@ Fe₃O₄-NPs), which was encapsulated by alginate-Ca²⁺ via the blend crosslinking method. The structural, textural, chemical and morphological proprieties of as prepared materials were studied by XRD, FTIR, Raman spectroscopy, nitrogen adsorption-desorption, XPS, SEM and TEM. The adsorption kinetic and isotherm data were well fitted to the pseudo-second-order and Langmuir models. Magnetic particles exhibited an excellent ability to adsorb methylene blue (MB) from aqueous solutions with maximum MB adsorption capacity of 180.42 mg g^-1 (PC@Fe₃O₄ NPs powder) and 49.66 mg g^-1 (beads based PC@Fe₃O₄-NPs@Alginate). Response surface methodology was used to optimize the removal efficiency of MB from aqueous solution and optimum parameters were determined. Magnetic beads based PC showed good magnetic propriety, long-term stability, regeneration capabilities and high extent mass recovery.

Functionalized magnetic mesoporous silica/poly(m-aminothiophenol) nanocomposite for Hg(II) rapid uptake and high catalytic activity of spent Hg(II) adsorbent

Currently, magnetic mesoporous silica nanospheres have been employed widely as adsorbents due to their large surface area and easy recovery. Herein, the functionalized magnetic mesoporous silica/organic polymers nanocomposite (MMSP) was fabricated by the grafted poly(m-aminothiophenol) embedded the aminated magnetic mesoporous silica nanocomposite based on Fe₃O₄ magnetic core, which was shelled by mesoporous silica and further modified by (3-aminopropyl) triethoxysilane. The adsorption properties of as-developed MMSP were systematically explored by altering the experimental parameters. The results indicated that the adsorption capacity and removal percentage of the MMSP could reach 243.83 mg/g and 97.53% within only 10 min at pH 4.0, and the coexisting ions had no significant effect on the selective Hg(II) ions removal from aqueous solutions, meanwhile, the adsorbent recovered by a magnet still exhibited good adsorption performance after recycled 5 times. In addition, by analyzing experimental data, the adsorption process of Hg(II) ions belonged to spontaneous exothermic adsorption, and the possible adsorption mechanisms were proposed based on the pseudo-second-order model and Langmuir model. After adsorption study, the waste material adsorbed Hg(II) was developed as an efficient catalyst for transformation of phenylacetylene to acetophenone with yield of 97.06%. In this study, we designed an efficient and selective material for Hg(II) ions remove and provided a treatment of the post-adsorbed mercury adsorbent by converting the waste into an excellent catalyst, which reduced the economic and environmental impact from conventional adsorption techniques.

Investigation of photocatalytic behavior of modified ZnS:Mn/MWCNTs nanocomposite for organic pollutants effective photodegradation

In this research, zinc sulfide (ZnS) doped with manganese (Mn) is synthesized on functionalized multiwall carbon nanotubes (MWCNTs) nanocomposite by a facile co-precipitation method as the photocatalysis. Due to the excellent electrical and optical characteristics of ZnS:Mn/MWCNTs nanocomposite, it is worth to investigate its photodegradation activity. To investigate the photocatalytic degradation properties of organic pollutants, the synthesis conditions were optimized in the presence of four substances: COOH, ethylene glycol, sodium dodecyl sulfate, and polyvinyl-pyrrolidone. Surface studies of the photocatalyst, i.e., structural, morphological, optical and physical properties, were characterized by FTIR, PL, XRD, SEM, and TEM analyses. The results showed that Mn ions decreased the band gap energy of the nanocomposites and there was excellent adhesion between ZnS and MWCNTs in the synthesized composite. According to the results, MWCNTs effectively increased the photocatalytic activity of the ZnS nanoparticles by the electron-hole pair recombination of ZnS and MWCNTs, and the composites with the carboxylic functional group showed greater photocatalytic activity. In addition, the kinetic studies showed that the photocatalytic process obeyed the pseudo-first-order kinetic model. To determine the exact mathematical formula of the photocatalysis, response surface methodology was modeled by the central composite design method. Various parameters, such as the time of the treatment process and initial concentration of the pollutants were studied for a quadratic model that fit all the cases well and their mathematical models were obtained.

Study of the adsorption mechanism on the surface of a ceramic nanomaterial for gaseous Hg(II) removal

Stable Hg(II)-containing flue gas has been successfully simulated by the plasma oxidation of Hg(0), and an effective solution for Hg(0) mercury fumes was obtained by combining the plasma with a ceramic nanomaterial. Characterization tests showed that the ceramic nanomaterial was mainly composed of silicon dioxide (SiO₂) with other minor constituents, including potassium mica (KAl₃Si₃O₁₁), iron magnesium silicate (Fe_0.24Mg_0.76SiO₃) and dolomite (CaMg(CO₃)₂). The nanomaterial had many tube bank structures inside with diameters of approximately 8-10 nm. The maximum sorption capacity of Hg(II) was 5156 μg/g, and the nanomaterial can be regenerated at least five times. During the adsorption, chemical adsorption first occurred between Hg(II) and sulfydryl moieties, but these were quickly exhausted, and Hg(II) was then removed by surface complexation and wrapped into Fe moieties. The pseudo-first-order kinetic model and the Langmuir equation had the best fitting results for the kinetics and isotherms of adsorption. This work suggests that the ceramic nanomaterial can be used as an effective and recyclable adsorbent in the removal of gaseous Hg(II).