Rapid high adsorption performance of hydrous cerium-magnesium oxides for removal of fluoride from water

Zirconium‑cerium modified polyvinyl alcohol/NaCMC biocomposite film: Synthesis of films through high-speed shear assisted technique and removal fluoride from water

A new zirconium and cerium-modified polyvinyl alcohol (PVA) sodium carboxymethyl cellulose (NaCMC) film (PVA/CMC-Zr-Ce) was synthesized thru a high-speed shear-assisted method and its adsorption for the removal of fluoride was studied, in which the NaCMC provided -COONa for ion exchange between Na and Zr-Ce, thus the loading amount of Zr-Ce on films was accordingly increased. The morphology and structure of PVA/CMC-Zr-Ce were characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Besides, the mechanical properties, water contact angle, and swelling ratio of film were also evaluated. The addition of high-speed shear improved the dispersion of the emulsion system, and PVA/CMC-Zr-Ce film with good adsorption performance and film stability was prepared. While, it was found that the adsorption capacity could reach 67.25 mg/g and equilibrium time could reach 20 min. The adsorption mechanism of PVA/CMC-Zr-Ce revealed that ion exchange between hydroxide and fluoride, electrostatic interactions and complexation were the dominating influencing factors. Based on these findings, it can be concluded that PVA/CMC-Zr-Ce film- synthesized with high-speed shear assistance technique is a promising adsorbent for fluoride removal from water.

Advances and future perspectives of water defluoridation by adsorption technology: A review

Fluoride contamination in water sources poses a significant challenge to human health and the environment. In recent years, adsorption technology has emerged as a promising approach for water defluoridation due to its efficiency and cost-effectiveness. This review article comprehensively explores the advances in water defluoridation through adsorption processes. Various adsorbents, including natural and synthetic materials, have been investigated for their efficacy in removing fluoride ions from water. The mechanisms underlying adsorption interactions are elucidated, shedding light on the factors influencing defluoridation efficiency. Moreover, the review outlines the current state of technology, highlighting successful case studies and field applications. Future perspectives in the field of water defluoridation by adsorption are discussed, emphasizing the need for sustainable and scalable solutions. The integration of novel materials, process optimization, and the development of hybrid technologies are proposed as pathways to address existing challenges and enhance the overall efficacy of water defluoridation. This comprehensive assessment of the advances and future directions in adsorption-based water defluoridation provides valuable insights for researchers, policymakers, and practitioners working towards ensuring safe and accessible drinking water for all.

Novel development of zinc oxide-coated carbon nanoparticles from pineapple leaves using sol gel method for optimal adsorption of Cu2+ and reuse in latent fingerprint application

This study underlines a latest approach of preparing nitrogen carbon nanoparticles fused on zinc oxide nanoparticle nanocomposite (N-CNPs/ZnONP nanocomposite) for the uptake of copper ions (Cu2+) from wastewater using a sol gel method. The metal loaded adsorbent was then applied in the latent fingerprint application. N-CNPs/ZnONP nanocomposite proved to be a good sorbent for the optimal adsorption of Cu2+ at pH 8 and 1.0 g/L dosage. Langmuir isotherm best fitted the process with the maximum adsorption capacity of 285.71 mg/g that was superior to most values reported in other studies for the removal of Cu2+. At 25 °C, the adsorption was spontaneous and endothermic. Furthermore, Cu2+-N-CNPs/ZnONP nanocomposite revealed to be sensitive and selective for latent fingerprint (LFP) identification on a variety of porous surfaces. As a result, it is an excellent identifying chemical for latent fingerprint recognition in forensic science.

3D flower-like zirconium magnesium oxide nanocomposite for efficient fluoride removal

A 3D flower-shaped bimetallic nanocomposite zirconium magnesium oxide (ZMO) was prepared first time by the controlled solution combustion method using triethanolamine (TEA) as a fuel and chelating agent. The composite material was used to remove excess fluoride via adsorption. The thermal stability of the adsorbent was characterized by thermogravimetric analysis (TGA). Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD) were used to characterize the adsorbent. The surface charge of the nano adsorbent was determined by Zeta Sizer. The surface area and pore volume of the adsorbent were determined by Brunauer-Emmett-Teller (BET) isotherm and Barrett-Joyner-Halenda (BJH) methods. The adsorption behavior of fluoride was studied systematically varying the pH, contact time, adsorbent dose, and initial fluoride concentration. The adsorption followed the Langmuir isotherm model with a maximum adsorption capacity of 42.14 mg/g. The pseudo-second-order kinetic model was confirmed by the adsorption study. The maximum adsorption efficiency was in the 6-10 pH range. The reaction mechanism was mainly based on ion exchange between hydroxy and fluoride ions which was proven by X-ray photoelectron spectroscopy (XPS). Real water tests indicated that ZMO could be used as a potential defluoridation agent for fluoride containing groundwater treatment.

Investigation on water defluoridation via batch and continuous mode using Ce-Al bimetallic oxide: Adsorption dynamics, electrochemical and LCA analysis

With variable atomic ratios, Ce-Al bimetallic oxides were fabricated using the sol-gel combustion method and utilized for efficient fluoride removal. The synthesized bimetallic oxides were extensively studied using advanced characterization techniques, including TGA, XRD, FTIR, BET surface area analysis, EDX-assisted FESEM, XPS and impedance analysis. These techniques facilitate the interpretation of the chemical and physical properties of the synthesized material. The Ce-Al (1:1) bimetallic oxide was selected as an adsorbent for the defluoridation. The Ce-Al (1:1) oxide demonstrates a moderately high surface area of 108.67 m²/g. The sorption behaviour of fluoride on Ce-Al (1:1) was thoroughly investigated using batch and column modes. The maximum fluoride removal efficiency (99.4%) was achieved at a temperature of 45 °C and pH of 7.0 using an adsorbent dose of 0.18 g/L for 35 min. Pseudo-second-order kinetic model appropriately describes the sorption process. Freundlich's adsorption isotherm was more pertinent in representing fluoride adsorption behaviour. The maximum fluoride adsorption capacity is 146.73 mg/g at 45 °C. Thermodynamics study indicates fluoride adsorption on Ce-Al (1:1) bimetallic oxide is spontaneous and feasible. The adsorption mechanism was interpreted through XPS spectra, indicating that the physisorption process is mainly responsible for fluoride adsorption. An in-depth investigation of the adsorption dynamics was carried out using mass transfer models and found that the external diffusion process limits the overall adsorption rate. An electrochemical investigation was performed to understand the effect of fluoride adsorption on the electrochemical behaviour of bimetallic oxide. The fixed-bed column adsorption study suggested that the lower flow rate and increased bed height favourably impacted the overall defluoridation process, and column adsorption results were suitably interpreted through both the Adam-Bohart model and Yoon-Nelson dynamics model. The sustainable aspect of the defluoridation process was elucidated in terms of carbon footprint measurement using life cycle assessment analysis. The carbon footprint of the entire treatment process was calculated as 0.094 tons/year.

Lignocellulosic Biomass as Sorbent for Fluoride Removal in Drinking Water

Water supply to millions of people worldwide is of alarmingly poor quality. Supply sources are depleting, whereas demand is increasing. Health problems associated with water consumption exceeding 1.5 mg/L of fluoride are a severe concern for the World Health Organization (WHO). Therefore, it is urgent to research and develop new technologies and innovative materials to achieve partial fluoride reduction in water intended for human consumption. The new alternative technologies must be environmentally friendly and be able to remove fluoride at the lowest possible costs. So, the use of waste from lignocellulosic biomasses provides a promising alternative to commercially inorganic-based adsorbents-published studies present bioadsorbent materials competing with conventional inorganic-based adsorbents satisfactorily. However, it is still necessary to improve the modification methods to enhance the adsorption capacity and selectivity, as well as the reuse cycles of these bioadsorbents.

Rapid and enhanced adsorptive mitigation of groundwater fluoride by Mg(OH)2 nanoflakes

Fluoride is one of the most abundant anions in groundwater, posing a significant threat to the safe drinking water supply worldwide. Fluoride contamination in drinking water at levels greater than 1.5 mg L^-1 causes a variety of serious health problems. To address this problem, the current study deals with the synthesis of Mg(OH)₂ nanoflakes by a facile and simple hydrothermal method in the absence of any added template. The sizes of these nanoflakes are in the range of 90 to 200 nm. These nanoflakes are pure and crystalline, possessing hexagonal phase structures. The surface areas of Mg(OH)₂ nanoflakes are varying from 75.8 to 108.1 m² g^-1. These Mg(OH)₂ nanoflakes exhibit excellent adsorption performance for fluoride over a pH range of 2.0 to 9.0 with a maximum Langmuir adsorption capacity of 3129 mg g^-1 at pH 7.0 at 313 K which is the highest for such kind of adsorbent reported so far. The adsorption process is spontaneous and endothermic which primarily follows pseudo-second-order kinetics. The adsorbent is effective in the presence of co-existing anions and is reusable up to the fifth cycle with a minimal loss of adsorption performance. The nanoflakes can effectively remove highly concentrated groundwater fluoride to a permissible limit within a short time which increases the versatility of using these nanoflakes for practical applications.

Tailored design of a novel composite foam of sodium alginate used for fluoride ion removal

Fluoride is an essential micronutrient for humans. Nonetheless, when the amount of fluoride ion is greater than required, it will cause skeletal fluorosis and dental fluorosis to threaten human health. In this paper, a series of sodium alginate (SA)-based foam materials are prepared by freeze-drying technique and anchored with the nano-activated alumina (nAl₂O₃) in the SA to obtain a novel adsorbent of SA-nAl₂O₃ foam used for fluoride ions removal. The SA-nAl₂O₃ foam morphology was further explored and confirmed that nAl₂O₃ existed stably in the SA. The adsorption results showed that the maximal fluoride ion adsorption capacity was 5.09 mg/g with 20 mg/L fluorine solutions at a pH of 3. The adsorption isotherm fitted adequately to the Langmuir isotherm model, which demonstrated that the adsorption process is closer to monolayer adsorption. The adsorption kinetics behavior of SA-nAl₂O₃ foam was described by a pseudo-second-order model, and the adsorption process occurred by chemisorption. Adsorption thermodynamics analysis emphasized that the adsorption process was spontaneous and endothermic. The main mechanism of the foam is ion exchange. The SA-nAl₂O₃ foam exhibited excellent regeneration performance and stability after three cycles.

Zr-Based Biocomposite Materials as an Alternative for Fluoride Removal, Preparation and Characteristics

The development of biocomposite materials used as adsorbents to remove ions in aqueous media has become an attractive option. The biomasses (base materials) are chemically treated and impregnated with metal cations, becoming competitive for fluoride-capture capacity. In this research, Valence orange (Citrus sinensis) and Red Delicious apple (Malus Domestica) peels were modified by alkaline treatment, carboxylation, and impregnation with zirconium (Zr). These materials were characterized morphologically and structurally to understand the modifications in the treated biomasses and the mechanism of fluoride adsorption. The results show changes in surface area and composition, most notably, an increment in roughness and Zr impregnation of the bioadsorbents. After batch experimentation, the maximum capacity of the materials was determined to be 4.854 and 5.627 mg/g for the orange and apple peel bioadsorbent, respectively, at pH 3.5. The experimental data fitted the Langmuir model, suggesting that chemisorption occurs in monolayers. Finally, the characterization of the bioadsorbents in contact with fluoride allowed the replacement of OH species by fluoride or the formation of hydrogen bonds between them as an adsorption mechanism. Therefore, these bioadsorbents are considered viable and can be studied in a continuous system.

Stabilization of fluorine-contaminated soil in aluminum smelting site with biochar loaded iron-lanthanide and aluminum-lanthanide bimetallic materials

Trivalent metals-modified-biochar (BC) has been widely used for the removal of fluorine (F) in water, but little is known about its effects on the stability and mobility of F-contaminated soil. Two types of modified-BC materials (BC-loaded iron-lanthanide (BC/Fe-La) and BC-loaded aluminum-lanthanide (BC/Al-La)) were synthesized and used for the remediation of F-contaminated soil. The forms of BC/La_xFe_3x(OH)_y in BC/Fe-La and BC/La_xAl_3x(OH)_y in BC/Al-La were identified by spectroscopy, X-ray dispersion, thermogravimetric, and pore diameter/volume analyses. Following application (4-12%, w/w) to F-contaminated soil for 30 d, water soluble fluoride (WSF) decreased significantly. The modified-BC with a 1:1:1 molar ratio (BC: Al³⁺ or Fe³⁺: La³⁺) were more effective than those at 1:0.5:0.5. The BC/Al-La were the most effective to stabilize F. In particular, the highest decrease in WSF (by 91.75%) was obtained with the application of 12% BC/Al-La-2, while 8% BC/Al-La-2% and 12% BC/Al-La-1 reduced the WSF by 87.58% and 90.17%, respectively; all values obtained were lower than the national standard of China (< 1.5 mg/L). In addition, the sequential extraction results showed that modified-BC promoted the transformation of the other chemical speciation to the Fe/Mn-F.

Fluoride ions sorption using functionalized magnetic metal oxides nanocomposites: a review

Fluoride is an anionic pollutant found superfluous in surface or groundwater as a result of anthropogenic actions from improper disposal of industrial effluents. In drinking water, superfluous fluoride has been revealed to trigger severe health problems in humans. Hence, developing a comprehensive wastewater decontamination process for the effective management and preservation of water contaminated with fluoride is desirable, as clean water demand is anticipated to intensify considerably over the upcoming years. In this regard, there have been increased efforts by researchers to create novel magnetic metal oxide nanocomposites which are functionalized for the remediation of wastewater owing to their biocompatibility, cost-effectiveness, relative ease to recover and reuse, non-noxiousness, and ease to separate from solutions using a magnetic field. This review makes an all-inclusive effort to assess the effects of experimental factors on the sorption of fluoride employing magnetic metal oxide nanosorbents. The removal efficiency of fluoride ions onto magnetic metal oxides nanocomposites were largely influenced by the solution pH and ions co-existing with fluoride. Overall, it was noticed from the reviewed researches that the maximum sorption capacity using various metal oxides for fluoride sorption was in the order of aluminium oxides >cerium oxides > iron oxides > magnesium oxides> titanium oxides, and most sorption of fluoride ions was inhibited by the existence of phosphate trailed by sulphate. The mechanism of fluoride sorption onto various sorbents was due to ion exchange, electrostatic attraction, and complexation mechanism.

GO-CeO₂ nanohybrid for ultra-rapid fluoride removal from drinking water

The presence of excess fluoride (F^- > 1.5 mg/L) in drinking water affects more than 260 million people globally and leads to dental and skeletal fluorosis among other health problems. This study investigated fluoride removal by graphene oxide-ceria nanohybrid (GO-CeO₂) and elucidated the mechanisms involved. The nanohybrid exhibited ultra-rapid kinetics for fluoride removal and the equilibrium (85% removal, 10 mg F^-/L initial concentration) was achieved within 1 min which is one of the fastest kinetics for fluoride removal reported so far. Fluoride removal by the nanohybrid followed Langmuir isotherm with a maximum adsorption capacity of 8.61 mg/g at pH 6.5 and that increased to 16.07 mg/g when the pH was lowered to 4.0. Based on the experimental results and characterization data, we have postulated that both electrostatic interaction and surface complexation participated in the fluoride removal process. The O^2- ions present in the CeO₂ lattice were replaced by F^- ions to make a coordination compound (complex). While both Ce⁴⁺ and Ce³⁺ were present in ceria nanoparticles (CeO₂ NPs), Ce³⁺ participated in fluoride complexation. During fluoride removal by GO-CeO₂, the GO sheets acted as electron mediators and help to reduce Ce⁴⁺ to Ce³⁺ at the CeO₂ NPs-GO interface, and the additional Ce³⁺ enhanced fluoride removal by the nanohybrid.

Investigation of kinetics and adsorption isotherm for fluoride removal from aqueous solutions using mesoporous cerium-aluminum binary oxide nanomaterials

Herein, we report the synthesis of Ce–Al (1 : 1, 1 : 3, 1 : 6, and 1 : 9) binary oxide nanoparticles by a simple co-precipitation method at room temperature to be applied for defluoridation of an aqueous solution. The characterization of the synthesized nanomaterial was performed by XRD (X-ray diffraction), FTIR (Fourier transform infrared) spectroscopy, TGA/DTA (thermogravimetric analysis/differential thermal analysis), BET (Brunauer–Emmett–Teller) surface analysis, and SEM (scanning electron microscopy). Ce–Al binary oxides in 1 : 6 molar concentration were found to have the highest surface area of 110.32 m² g⁻¹ with an average crystallite size of 4.7 nm, which showed excellent defluoridation capacity. The adsorptive capacity of the prepared material towards fluoride removal was investigated under a range of experimental conditions such as dosage of adsorbents, pH, and initial fluoride concentration along with adsorption isotherms and adsorption kinetics. The results indicated that fluoride adsorption on cerium–aluminum binary metal oxide nanoparticles occurred within one hour, with maximum adsorption occurring at pH 2.4. The experimental data obtained were studied using Langmuir, Freundlich, and Temkin adsorption isotherm models. The nanomaterial showed an exceptionally high adsorbent capacity of 384.6 mg g⁻¹. Time-dependent kinetic studies were carried out to establish the mechanism of the adsorption process by pseudo-first-order kinetics, pseudo-second-order kinetics, and Weber–Morris intraparticle diffusion kinetic models. The results indicated that adsorption processes followed pseudo-second-order kinetics. This study suggests that cerium–aluminum binary oxide nanoparticles have good potential for fluoride removal from highly contaminated aqueous solutions.

Mesoporous Ce–Al binary oxide nanomaterials prepared with a surface area of 110.32 m² g⁻¹ showed defluoridation capacity at pH 2.4, exhibited maximum adsorption capacity of 384.6 mg g⁻¹ and a removal efficiency of 91.5% at a small dose of nanoadsorbent.

Hydroxyapatite biomaterial production from chicken (femur and beak) and fishbone waste through a chemical less method for Cd2+ removal from shipbuilding wastewater

Hydroxyapatite (HAp) powder was produced from chicken (femur and beak) and fishbone wastes and used as a green adsorbent to decrease Cd²⁺ from aqueous media. The HAp powder was generated at 900 °C and characterized using physicochemical techniques. Chicken femur' HAp (16.72 m²/g) had a higher surface compared to chicken beak and fishbone ones. The solution pH was the most important parameter in removing Cd²⁺. The highest Cd²⁺ removal was achieved at pH 6, temperature of 25 °C, contact time of 80 min, and adsorbent mass of 2 g/L. The Cd²⁺ adsorption data fitted well with the quasi-second-order model in kinetics and the Freundlich model in isotherm. The highest adsorption capacity of Cd²⁺ using HAp-chicken femur, HAp-fish bone, and HAp-chicken beak was determined 22.94 mg/g, 21.54 mg/g, and 21.45 mg/g, respectively. The Cd²⁺ adsorption using HAp powder was a spontaneous and exothermic process and accidental collisions at the liquid-solid interface were reduced. The decrease of Cd²⁺ adsorption efficiency was not significant after multiple recovery steps of the desired powders. In addition to Cd²⁺, other parameters of real wastewater (shipbuilding industry) were reduced by the proposed adsorbents. The utilization of hydroxyapatite powder is expected to be a cheap and eco-friendly method for eliminating metals such as Cd²⁺.

Facile synthesis of Zr4+ incorporated chitosan/gelatin composite for the sequestration of Chromium(VI) and fluoride from water

The development of industrialization and agricultural activities have carried various negative impacts to living organisms in recent decades and also, the frequent problem of inorganic pollution have been environmental anxiety to the community. Among these, Cr⁶⁺ and F^- are priority poisonous pollutants from many industries. In this work, we present a low-cost synthesis procedure to obtain biocompatible zirconium incorporated chitosan-gelatin composite (CS-Zr-GEL) were fabricated and explored for the adsorptive removal of toxic Cr⁶⁺ and F^- from water. The adsorption mechanism of toxic Cr⁶⁺ and F^- was done by batch mode as a function of contact time, solution pH and co-existing ions. The obtained materials were extensively studied by several physico-chemical techniques to access their properties by X-ray diffraction (XRD), scanning electron microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) analysis. Additionally, the fabricated adsorbent is highly dependent on solution pH. The kinetic and isotherm data were fitted using pseudo-second-order kinetic and Langmuir isotherm models. The maximum adsorption capacity for CS-Zr-GEL is 138.89 and 12.13 mg/g at 323K for Cr⁶⁺ and F^- respectively. These findings demonstrate that the CS-Zr-GEL adsorbent represents a promising candidate that would have a practical influence on water/wastewater treatments.

Mechanism of simultaneous removal of aluminum and fluoride from aqueous solution by La/Mg/Si-activated carbon

La/Mg/Si-activated carbon derived from palm shell has been a suitable material for removal of aluminum and fluoride from aqueous solution. In the study, the mechanism of simultaneous removal of aluminum and fluoride by La/Mg/Si-activated carbon (La/Mg/Si-AC) was investigated to understand its high efficiency. It was found that the removal of aluminum and fluoride by La/Mg/Si-AC was favored at lower pH compared to the point of zero charge of La/Mg/Si-AC and high temperature. Adsorption capacity of Al(OH)₄^- was about 10 times higher than that of F^- due to the strong binding affinity of Al(OH)₄^- on protonated surface and competition between F^- and OH^- toward charged adsorption site. Kinetics results showed that the aluminum and fluoride adsorption were explained using the pseudo-second-order kinetic model and intra-particle diffusion model. Adsorption process of Al(OH)₄^- and F^- was driven by the potential rate-limiting step involved in mass transport process occurred on the boundary diffusion layer of porous adsorbent surface. Electrostatic interaction between protonated surface of La/Mg/Si-AC and negatively charged ions (i.e., Al(OH)₄^- and F^-) as well as ion-exchange between hydroxide and ionic metal species were important mechanisms in the process of aluminum and fluoride adsorption. Driving forces for adsorption of individual Al(OH)₄^- and F^- were not entirely different. Identifying the dominant mechanism will be helpful in understanding the adsorption process and developing new adsorbent.

Facile synthesis of chitosan-modified ZnO/ZnFe2O4 nanocomposites for effective remediation of groundwater fluoride

This study explores the possibility of developing an eco-friendly adsorbent for effective remediation of groundwater fluoride, a well-known health hazard affecting more than 25 nations on the various continents. A facile and milder approach has been adopted to synthesize chitosan-modified ZnO/ZnFe₂O₄ nanocomposites. The synthesized materials have been characterized by different spectroscopic, microscopic, and diffractometric techniques. X-ray photoelectron spectroscopy and X-ray diffraction studies have confirmed the formation of pure and highly crystalline ZnO/ZnFe₂O₄ nanocomposites. The presence of surface-adsorbed chitosan in the modified ZnO/ZnFe₂O₄ has been confirmed by FT-IR and thermogravimetric analysis. The results from microscopic and BET surface area analysis of ZnO/ZnFe₂O₄ nanocomposites indicated that chitosan plays a crucial role in modulating the surface morphology and surface properties of the nanocomposites. The nanocomposites exhibit excellent adsorption performance in the remediation of groundwater fluoride. Experimental conditions have been systematically designed to evaluate the optimum adsorption condition for fluoride, and the results have been analyzed with various non-linear models to describe the kinetics and isotherms of adsorption. The adsorption primarily follows Lagergren pseudo-first-order kinetics, and the Langmuir adsorption capacity is varied from 10.54 to 13.03 mg g^-1 over the temperature range 293-323 K. The thermodynamics study reveals that the adsorption process is endothermic and spontaneous. The mechanism of adsorption has been proposed based on the spectroscopic analysis of the fluoride-loaded adsorbent. The adsorption is non-specific in nature as co-existing anion can reduce its fluoride removal capacity. The effect of the co-existing anions on adsorption of fluoride follows the trend PO₄^3- > CO₃^2- > SO₄^2- > Cl^-. The adsorbent can be reused successfully for the 5th consecutive cycles of adsorption-desorption study. This study offers a very promising material for remediation of groundwater fluoride of affected areas.

Citric acid modified granular activated carbon for enhanced defluoridation

Excess fluoride (F^-, >1.5 mg F^-/L) in drinking water affects >260 million people across the globe and leads to dental and skeletal fluorosis. In this study, commercially available granular activated carbon (GAC) was modified with 0.3 M citric acid to get citric acid modified GAC (CAGAC). Over 70% of fluoride was removed in the first 60 min by CAGAC, whereas unmodified GAC removed only 30%. There were negligible interferences by co-existing ions (NO₃^-, Cl^-, HCO₃^-, SO₄^2-_, PO₄^3-) and organic matters. Maximum adsorption capacity of CAGAC was two times (1.65 mg/g) that of unmodified GAC (0.88 mg/g). Dubinin-Radushkevich (D-R) isotherm described the experimental data well indicating that ion exchange was involved in fluoride removal. CAGAC worked effectively over a wide range of pH (2-10) even though the point-of-zero-charge (PZC) was 4.89, and so the removal was not controlled by electrostatic interaction alone; surface adsorption and intra-particle diffusion were the rate-determining processes.

Rapid and efficient removal of acetochlor from environmental water using Cr-MIL-101 sorbent modified with 3, 5-Bis(trifluoromethyl)phenyl isocyanate

The excessive use of acetochlor (ACT), a commonly used herbicide with latent endocrine disrupting functions, causes surface water pollution. The efficient removal of ACT from contaminated water supplies is of paramount importance. In the current work, 3,5-Bis(trifluoromethyl)phenyl isocyanate (BTP) was successfully anchored onto Cr-MIL-101 walls via covalent incorporation to afford Cr-MIL-101-BTP as a novel adsorbent for the high-efficiency removal of ACT in aqueous solutions. The kinetic adsorption process, adsorption isotherms, adsorbent regeneration, and key parameters, such as adsorbent dosage, pH value, and ionic strength, for the adsorption of ACT were studied. Results showed that a pseudo-second-order rate equation effectively describes the adsorption kinetics. The Langmuir model exhibited a better fit to adsorption isotherm than the Freundlich model. Given the π-π stacking and hydrogen bond interaction, the adsorption capacity in Cr-MIL-101-BTP approached a maximum of 312.5 mg/g for ACT, which was considerably higher than the adsorption capacities of many other reported adsorbents. The excellent adsorption characteristics of Cr-MIL-101-BTP toward ACT were preserved in a wide pH range and high concentration of background electrolytes. In addition, the result showed that partition coefficient (PC) of Cr-MIL-101-BTP was 356.14 mg/g/μM at 5 mg/L of ACT concentration, which was found as the outperformer in all tested subjects. The ACT adsorption capacity of Cr-MIL-101-BTP at the breakthrough point was greatly influenced by initial concentration, and could be described by the Thomas model. Regeneration experiments indicated that the Cr-MIL-101-BTP was recycled at least six times without significant loss of adsorption capacity. Moreover, Cr-MIL-101-BTP did not show cytotoxic activity against the tested HepG2 cell lines and did not pose serious risks to Daphnia carinata survival (48 h LC₅₀ = 446.6 μg/mL). These results prefigured the promising potential of Cr-MIL-101-BTP as a novel adsorbent for the efficient removal of ACT from aqueous solutions.

Biomaterial functionalized cerium nanocomposite for removal of fluoride using central composite design optimization study

Excess fluoride concentration in drinking water is a global issue, as this has an adverse effect on human health. Several adsorbents have been synthesized from natural raw material to remove fluoride from water. Reported adsorbents have some problems with the leaching of metal ions, fewer adsorption sites, and low adsorption capacity. Therefore, to address this, an effective biomaterial derived from the Luffa cylindrica (LC), containing many active sites, was integrated with a nano form of cerium oxide to form a robust, biocompatible, highly porous, and reusable LC-Ce adsorbent. This synthesized biosorbent offers better interaction between the active sites of LC-Ce and fluoride, resulting in higher adsorption capacity. Several factors, influence the adsorption process, were studied by a central composite design (CCD) model of statistical analysis. Langmuir's and Freundlich's models well describe the adsorption and kinetics governed by the pseudo-second-order model. The maximum monolayer adsorption capacity was found to be 212 and 52.63 mg/g for LC-Ce and LC, respectively determined by the Langmuir model. Detailed XPS and FTIR analyses revealed the underlying mechanism of fluoride adsorption via ion-exchange, electrostatic interaction, H-bonding, and ion-pair formation. All the results indicate that LC-Ce could serve as a suitable adsorbent for efficient fluoride removal (80-85%).

Multiple bimetallic (Al-La or Fe-La) hydroxides embedded in cellulose/graphene hybrids for uptake of fluoride with phosphate surroundings

To insight into the selective adsorption mechanism of fluoride in the bimetallic system, Fe-La or Al-La composites were comparatively embedded onto the cellulose/graphene hybrids (CG hybrids) to fabricate the Fe-La@CG hybrids or Al-La@CG hybrids for fluoride uptake with existing phosphate. The results showed that Al-La@CG hybrids were mainly in the amorphous nature, while Fe-La@CG hybrids have the identical diffraction peaks as compared with those of hydrated lanthanum oxides (HLO) and hydrated iron oxides (HFO). Fluoride capture by Al-La@CG and Fe-La@CG hybrids followed the similar tendencies with the pH altering, but the adsorption performance of Al-La@CG hybrids was better than that of Fe-La@CG hybrids at the same pH levels. Adsorption of fluoride onto Al-La@CG hybrids exhibited less sensitivity and high selectivity with existing phosphate as compared with that of Fe-La@CG hybrids, which further indicated that the Al-La@CG hybrids were more preferable for fluoride adsorption. The fraction areas of La-F and Al-F accounted for 79.1 % and 20.9%, which indicated that the fluoride onto the Al-La@CG hybrids was mainly based on the La species. Similarly, La-F in exhausted Fe-La@CG hybrids accounted for 55.6%, higher than that (44.4%) of Fe-F.

Bone char as a green sorbent for removing health threatening fluoride from drinking water

Millions of people around the world suffer from or prone to health problems caused by high concentration of fluoride in drinking water sources. One of the environmentally friendly and cost-effective ways for removing fluoride is the use of bone char. In this review, the structural properties and binding affinity of fluoride ions from different water sources was critically discussed. The effect of experimental conditions on enhancing the adsorption capacity of fluoride ions using bone char samples was addressed. It appears that surface properties, and conditions of the bone char production such as temperature and residence time play an important role in designing the optimal fluoride removal process. The optimum temperature for fluoride removal seems to be in the range of 500-700 °C and a residence time of 2 h. Applying various equilibrium adsorption isotherms for understanding fluoride adsorption mechanism was presented. The effect of bone char modification with different elements were discussed and recommendations for a further increase in the removal efficiency was proposed. Cost of bone char production and large-scale treatment systems were also discussed based on information available from scientific and commercial sources. Challenges with existing domestic defluoridation designs were highlighted and suggestions for new conceptual designs were provided.

Synthesis of a biodegradable interpenetrating polymer network of Av-cl-poly(AA-ipn-AAm) for malachite green dye removal: kinetics and thermodynamic studies

This paper deals with the synthesis of a biodegradable interpenetrating polymer network (IPN) from the natural polysaccharide aloe vera (Av), acrylamide (AAm) and acrylic acid (AA), and its evaluation as a dye removal device. In the synthesis of Av-cl-poly(AA-ipn-AAm), ammonium persulfate (APS) was used as an initiator, N,N′-methylene bisacrylamide (MBA) as a cross-linker, AA and AAm as primary and secondary monomers, respectively. Soil burial and composting methods were used to study the biodegradability of the synthesized IPN and the results showed 94% degradation within 70 days using the composting method and 86% degradation within 77 days using the soil burial method. Biodegradation was confirmed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) techniques. The synthesized IPN was used as a device for the removal of malachite green (MG) dye from aqueous solution. The maximum MG removal capacity of the synthesized IPN was found to be 97.3% under the optimal conditions (i.e. time = 180 min., pH = 4.5, adsorbent dose = 5 g L⁻¹). The adsorption kinetics of malachite green molecules onto synthesized IPN was studied and compared using pseudo-first-order and pseudo-second-order models and we found that the adsorption process is better represented by the pseudo-second-order model. The different adsorption isotherm models like Langmuir, Freundlich, Dubinin–Radushkevich, Temkin, Redlich–Peterson and Sips isotherms were studied. The best-fitting isotherm model for the present experiment is the Langmuir model.

This paper deals with the synthesis of a biodegradable interpenetrating polymer network (IPN) from the natural polysaccharide aloe vera (Av), acrylamide (AAm) and acrylic acid (AA), and its evaluation as a dye removal device.