The density, dynamic viscosity and kinematic viscosity of protic and aprotic polar solvent (pure and mixed) systems: An experimental and theoretical insight of thermophysical properties

Electrochemically Mediated Atom Transfer Radical Polymerization Driven by Alternating Current

Alternating current (AC) and pulsed electrolysis are gaining traction in electro(organic) synthesis due to their advantageous characteristics. We employed AC electrolysis in electrochemically mediated Atom Transfer Radical Polymerization (eATRP) to facilitate the regeneration of the activator CuI complex on Cu0 electrodes. Additionally, Cu0 served as a slow supplemental activator and reducing agent (SARA ATRP), enabling the activation of alkyl halides and the regeneration of the CuI activator through a comproportionation reaction. We harnessed the distinct properties of Cu0 dual regeneration, both chemical and electrochemical, by employing sinusoidal, triangular, and square-wave AC electrolysis alongside some of the most active ATRP catalysts available. Compared to linear waveform (DC electrolysis) or SARA ATRP (without electrolysis), pulsed and AC electrolysis facilitated slightly faster and more controlled polymerizations of acrylates. The same AC electrolysis conditions could successfully polymerize eleven different monomers across different mediums, from water to bulk. Moreover, it proved effective across a spectrum of catalyst activity, from low-activity Cu/2,2-bipyridine to highly active Cu complexes with substituted tripodal amine ligands. Chain extension experiments confirmed the high chain-end fidelity of the produced polymers, yielding functional and high molecular-weight block copolymers. SEM analysis indicated the robustness of the Cu0 electrodes, sustaining at least 15 consecutive polymerizations.

Vivid-Colored Electrorheological fluids with simultaneous enhancements in color clarity and Electro-Responsivity

HYPOTHESIS

Surface modification of dielectric materials changes the dipole-dipole interactions under electric fields, thereby controlling the electrorheological (ER) response. The introduction of metal oxides onto mica templates and further coating of dyes is expected to simultaneously improve the color clarity and ER performance.

EXPERIMENTS

Dye-coated TiO2 platelets on mica are synthesized for high-performance colorful ER fluids. A sol-gel method is utilized to grow TiO2 on mica to prepare precursor light-colored mica/TiO2 materials, which are coated with appropriate dyes to enhance the vividness as determined by the Commission Internationale de clairage L*a*b* color system. The color expression and color clarity improvement are explained via the light interference effect and the presence of chromophores.

FINDINGS

The uniform TiO2 layers can be obtained under low pH conditions with controlled nucleation kinetics. The addition of dyes to TiO2 increases the surface area and porosity of ER materials and introduces heteroatoms that act as positive factors. In practical ER applications, dye-coated TiO2-based ER fluids exhibit higher ER performances compared with the corresponding light-colored TiO2-based ER fluids. The vivid-colored ER fluids could provide an easy selection for a wide range of rheological systems requiring a specific magnitude of stress by confirming the color.

Surface Properties of N,N-Dimethylformamide-Water Mixtures, As Seen from Computer Simulations

The liquid-vapor interface of N,N-dimethylformamide (DMF)-water mixtures, spanning the entire composition range, is investigated in detail at 298 K by molecular dynamics simulation and intrinsic surface analysis. DMF molecules are found to adsorb strongly at the liquid surface, but this adsorption extends only to the first molecular layer. Water and DMF molecules mix with each other on the molecular scale even in the surface layer; thus, no marked self-association of any of the components is seen at the liquid surface. The major surface component prefers such orientation in which the molecular dipole vector lays parallel with the macroscopic plane of the surface. On the other hand, the preferred orientation of the minor component is determined, at both ends of the composition range, by the possibility of H-bond formation with the major component. The lack of H-donating ability of DMF leads to a rapid breakup of the percolating H-bond network at the surface; due to the strong adsorption of DMF, this breakup occurs below the bulk phase DMF mole fraction of 0.03. The disruption of the surface H-bond network also accelerates the exchange of both species between the liquid surface and bulk liquid phase, although, for water, this effect becomes apparent only above a bulk phase DMF mole fraction of 0.4. H-bonds formed by a DMF and a water molecule live, on average, 25-60% longer than those formed by two water molecules at the liquid surface. A similar, but smaller (i.e., about 10-20%) difference is seen in the bulk liquid phase. The enhanced surface mobility of the molecules results in 2-6 times larger diffusion coefficient and 2-5 times shorter H-bond lifetime values at the liquid surface than in the bulk liquid phase. The diffusion of both molecules is slowed down in the presence of the other species; in the case of DMF, this effect is caused by the formation of water-DMF H-bonds, whereas for water, steric hindrances imposed by the bulky DMF neighbors are responsible for this slowing down.

Local Structure of DMF-Water Mixtures, as Seen from Computer Simulations and Voronoi Analysis

Molecular dynamics simulations of mixtures of N,N-dimethylformamide (DMF) with water of various compositions, covering the entire composition range, are performed on the canonical (N,V,T) ensemble. The local structure of the mixtures is analyzed in terms of radial distribution functions and the contributions of the first five neighbors to them, various order parameters of the water molecules around each other, and properties of the Voronoi polyhedra of the molecules. The analyses lead to the following main conclusions. The two molecules are mixing with each other even on the molecular scale; however, small self-aggregates of both components persist even at their small mole fraction values. In particular, water-water H-bonds exist in the entire composition range, while water clusters larger than 3 and 2 molecules disappear above the DMF mole fraction values of about 0.7 and 0.9, respectively. The O atoms of the DMF molecules can well replace water O atoms in the hydrogen-bonding network. Further, the H-bonding structure is enhanced by the presence of the hydrophobic CH₃ groups of the DMF molecules. On the other hand, the H-bonding network of the molecules gradually breaks down upon the addition of DMF to the system due to the lack of H-donating groups of the DMF molecules. Finally, in neat DMF, the molecules form weak, CH-donated H-bonds with each other; however, these H-bonds disappear upon the addition of water due to the increasing competition with the considerably stronger OH-donated H-bonds DMF can form with the water molecules.

Data-driven approach to mitigate quality impact of hygroscopic pharmaceutical raw materials throughout the supply chain

The challenges of working with hygroscopic pharmaceutical raw materials can have a significant impact on the industry's ability to make high-quality medicines. In order to mitigate the impact to the manufacturing process or product quality it is critical to understand the hygroscopicity of the raw materials across the entire supply chain so that the proper management strategies can be implemented, from the raw material manufacturing to the use of the raw material in the drug manufacturing process. Employing suitable controls protects these materials from physical and chemical changes due to moisture uptake such as caking or hydrolysis. We have developed a fit for purpose and data-driven approach to hygroscopicity classifications of over 200 commonly used chemicals, excipients, media and resins in drug manufacturing processes. Dynamic vapor sorption data is presented with supporting thermal gravimetric analysis and X-ray powder diffraction data where pertinent. Approximately 60% of all raw materials tested were determined to be hygroscopic. Strategies for applying this data to reduce the potential impact of hygroscopic materials on the manufacturing of pharmaceuticals are discussed with examples.

Intermolecular interaction of diamine-diol binary system: A mini-review

The highly selective chemical reaction of carbon dioxide with organic amines is considered to a mature technology and a feasible initial path for carbon capture. In order to solve the disadvantages of high volatility, equipment corrosion and high energy consumption of traditional organic amines, amine alcohol "mixture based" solution has been developed and showed excellent carbon dioxide absorption capacity, which is due to the positive effect of intermolecular interaction in amine alcohol "mixture based" solution system on thermodynamic properties. However, the influencing factors of the intermolecular force in multicomponent solution system are complex, including the chemical, physical, structural effects. Therefore, it is necessary to comprehensively use a variety of characterization methods to systematically understand the form of intermolecular interaction in multicomponent solution system. This review systematically discusses the determination of intermolecular interactions in diamine-diol multicomponent solutions by three mainstream research methods, theoretical calculation method, spectral method, and thermodynamic method, aiming to provide a theoretical reference for the industrial production, the supplement to experimental data, and construction and understanding of theoretical models of multicomponent solution system.

Green Solvents for the Liquid Phase Exfoliation Production of Graphene: The Promising Case of Cyrene

The liquid phase exfoliation (LPE) of graphite has allowed to produce graphene materials on a large scale and at a reasonable cost. By this method, stable dispersions, inks and liquid suspensions containing atomic-thick graphene flakes with tailored concentrations can be produced, opening up applications in a wide range of cutting-edge technologies such as functional coatings, printed and flexible electronics, and composites. However, currently established LPE techniques raise several health and environmental risks, since unsafe and toxic solvents (such as NMP, DMF, and DMSO) are often regarded as the most effective liquid media for the process. Therefore, it appears necessary to unlock eco-friendly and sustainable methods for the production of graphene at an industrial scale. This review focuses on the latest developments in terms of green solvents for LPE production of graphene. We highlight the use of a new green solvent, Cyrene, and its performance when compared to conventional solvents.

Calculation of the Free Energy of Mixing as a Tool for Assessing and Improving Potential Models: The Case of the N,N-Dimethylformamide-Water System

The Helmholtz free energy, energy, and entropy of mixing of N,N-dimethylformamide (DMF) and water are calculated in the entire composition range by means of Monte Carlo computer simulations and thermodynamic integration using all possible combinations of five DMF and three widely used water models. Our results reveal that the mixing of DMF and water is highly non-ideal. Thus, in their dilute solutions, both molecules induce structural ordering of the major component, as evidenced by the concomitant decrease in the entropy. Among the 15 model combinations considered, only 4 reproduce the well-known full miscibility of DMF and water, 3 of which strongly exaggerate the thermodynamic driving force of the miscibility. Thus, the combination of the CS2 model of DMF and the TIP4P/2005 water model reproduces the properties of the DMF-water mixtures far better than the other combinations tested. Our results also reveal that moving a fractional negative charge from the N atom to the O atom of the DMF molecule, leading to the increase in its dipole moment, improves the miscibility of the model with water. Starting from the CS2 model and optimizing the charge to be moved, we propose a new model of DMF that reproduces very accurately both the Helmholtz free energy of mixing of aqueous DMF solutions in the entire composition range (when used in combination with the TIP4P/2005 water model) and also the internal energy of neat DMF.

Impact of anion shape on Li+ solvation and on transport properties for lithium–air batteries: a molecular dynamics study

Here we report the influence of the anion shape over the solvation structure and transport properties over commonly employed Li–O₂ electrolytes and discuss their implications for the device.