A highly selective and sensitive turn on optical probe as a promising molecular platform for rapid detection of Zn (II) ion in acetonitrile medium: Experimental and theoretical investigations

Tri-armed Schiff base fluorescent sensor for the rapid recognition of Zn(II): application in live cell imaging, test strips and TLC

Various metal ions exist in nature and human beings and play limitless vital roles in both the atmosphere and biology. A fundamental and useful aspect is the qualitative and quantitative assessment of Zn(II) at concentration levels as low as parts per billion (ppb). Thus, the design and development of novel fluorescent turn-on receptors have gained significant interest because of their potential for use in live cell imaging to detect biologically relevant metal ions with high selectivity and sensitivity. The present research illustrates the design and synthesis of a novel fluorescent sensor [(1,3,5-triazine-2,4,6-triyl)tris(hydrazine-2-yl-1-ylidene)tris(methaneylylidene)]tris(2,4-di-tert-butylphenol) (THDBP) for the selective and sensitive probing of Zn(II). The sensor exhibited a fluorescence turn-on mechanism upon treatment with Zn(II) ions at λemi. 503 nm in aq. acetonitrile. The formation of a 1 : 3 complex between THDBP and Zn(II) is confirmed from the Job plot and ESI-MS spectrum. The evaluated limit of detection (LOD) and association constant (Ka) of the sensor THDBP for Zn(II) were found to be 1.03 × 10-10 M and 2.33 × 108 M-1, respectively. Further research demonstrates the practical application of the sensor for the detection of Zn(II) ions in live cells. The sensing ability of the sensor THDBP was also explored through inexpensive test strips and TLC sheets.

Zinc-Induced Luminescent l-Valine-Based Pseudopeptidic Soft Bioinspired Materials for Precise Tuning of Nanoassembly

Pseudopeptide-based bioinspired materials are emerging for selective recognition of biologically significant analytes and are applicable in the modern nanoscience field. Therefore, we have developed novel multifunctional C2-symmetric soft pseudopeptides by amino acid l-valine and salicylaldehyde fragments using a series of aliphatic linkers. They are highly selective and sensitive to Zn (II) ions under physiological conditions and reveal significant fluorescence enhancement with the PET mechanism. The molecular self-assembly shows zinc-induced morphological transformation of the rod-shaped assembly into a chain-like morphology. Such a metal-induced hierarchical nano-assembly may have relevance for specific nanobiotechnology applications.

Luminescent Pyrene-based Schiff base Receptor for Hazardous Mercury(II) Detection Demonstrated by Cell Imaging and Test Strip

Qualitative and quantitative analysis of mercury at concentration levels as low as parts per billion (ppb) is a basic and practical concern. The vast majority of research in this field has centered on the development of potent chemosensor to monitor mercuric (Hg²⁺) ions. Mercury exists in three oxidation states, + 2, + 1 and 0, all of which are highly poisonous. In this study, (N¹E,N²E)-N¹,N²-bis(pyrene-1-ylmethylene)benzene-1,2-diamine (PAPM), a novel photoluminescent sensor based on pyrene platform was synthesized. Over the tested metal ions (Cd²⁺, Co²⁺, Cu²⁺, Mg²⁺, Mn²⁺, Ni²⁺, K⁺, Na⁺, Zn²⁺, Sr²⁺, Pb²⁺, Al³⁺, Cr³⁺ and Fe³⁺) the sensor responds only to Hg²⁺ by showing high selectivity and sensitivity. After treatment with mercuric ions at room temperature, the luminescence intensity of probe was quenched at 456 nm. The quenching of fluorescence intensity of probe upon addition of mercury is due to the effect of "turn-off" chelation enhanced quenching (CHEQ) by the formation of 1:1 complex. The ESI-MS spectrum and the Job's experimental results confirm the formation of 1:1 complex between PAPM and Hg²⁺. The detection limit and association constant of sensor for mercury is computed using fluorescence titration data and were found to be 9.0 × 10^-8 M and 1.29 × 10⁵ M^-1 respectively. The practical application of sensor towards recognition of mercury(II) ions was explored through economically viable test strips and also using cell imaging studies.

Effect of Hydroxyl Group on Photo-Physical Properties and Dipole Moments of Fluorescent Dyes: An Experimental and Computational Approach

In this work, structurally similar, (E)-N'-(2-hydroxybenzylidene)-3,5-di-tert-butyl-2-hydroxybenzohydrazide (A) and (E)-N'-(2-4-dihydroxybenzylidene)-3,5-di-tert-butyl-2-hydroxybenzohydrazide (A-OH) dyes dissolved in general solvents have been studied to explore photo-physical properties, employing solvatochromic shift method, thereby determining their dipole moments in the ground (μ_g) and excited (μ_e) states. The molecule A shows a bathochromic shift of fluorescence emission maxima in aprotic solvents whereas a hypsochromic shift in protic solvents. Interestingly, A-OH follows a hypsochromic shift in both protic and aprotic solvents with increasing solvent polarity. The effect of hydroxyl substituent on UV-Visible absorption, fluorescence emission, and dipole moment of the titled organic molecules was explained. Theoretical methods such as Bilot-Kawski method for determination of μ_g and μ_e and Bakshiev, Kawski-Chamma-Viallet, Lippert-Mataga equations for μ_e, and Reichardt method for the difference between μ_g and μ_e were employed. It is observed that μ_e is higher than that of μ_g for both the molecules, and interestingly, upon substituting an additional hydroxyl group the value of μ_g has increased while μ_e is decreased. The DFT calculations have been performed to support experimental results by employing DFT/B3LYP/6-311G + (d) and TD-DFT/B3LYP/6-311G + (d) method using Gaussian09 software. The electrophilic and nucleophilic sites on the molecules were studied with the help of MEP. The NBO analysis results show that the interaction N24 (σ) → C22-O23 (π*) is found to be stronger in both the molecules with energy 68.90 kJ/mol and the effect of hydroxyl group is also discussed on the basis of HOMO and LUMO.

A fluorometric and colorimetric dual-readout nanoprobe based on Cl and N co-doped carbon quantum dots with large stokes shift for sequential detection of morin and zinc ion

A novel visual nanoprobe was developed for the sequential detection of morin and zinc ion (Zn²⁺) based on Cl and N co-doped carbon quantum dots (ClNCQDs) via a fluorometric and colorimetric dual-readout mode. The yellow fluorescence ClNCQDs was synthesized by the one-step hydrothermal treatment of o-chlorobenzoic acid and p-phenylenediamine. The most distinctive property of the ClNCQDs is the large stokes shift (177 nm), which is significantly higher than other reported CQDs. The fluorescence of the ClNCQDs can be effectively quenched by morin based on the synergistic effect of IFE, electrostatic interaction, and dynamic quenching process, and recovered upon the addition of Zn²⁺ due to strong interaction between morin and Zn²⁺. The nanoprobe exhibited favorable selectivity and sensitivity toward morin and Zn²⁺ with detection limits of 0.09 µM and 0.17 µM, respectively. Simultaneously, the color of the ClNCQDs solution was changed (light-pink → faint-yellow → dark-yellow) along with the variation of the fluorescence signal of the ClNCQDs. This proposed nanoprobe was successfully applied for morin and Zn²⁺ analyses in actual samples and live cells with high accuracy. The results of this study demonstrate the great application prospects of the ClNCQDs for morin and Zn²⁺ detection in complex actual samples and biosystems.

Ratiometric ultrasensitive optical chemisensor film based antibiotic drug for Al(III) and Cu(II) detection

Herein, we developed and designed a novel ratiometric optical chemisensor film for determining Al(III) and Cu(II) in low concentration ranges. The chemisensor film consists of (a) antibacterial drug Ciprofloxacin (CPFX) [1-cyclopropyl-6-fluoro1,4-dihydro-4-oxo-7-(piperaziny-l-yl) quinolone-3carboxylic acid] and (b) a reference dye 5,10,15,20- tetrakis (pentafluorophenyl) porphyrin (TFPP) in a polyvinyl chloride (PVC) matrix. PVC was applied as a homogeneous system for mixing CPFX and TFPP. The emission intensity of the CPFX in the PVC matrix varies depending on the concentrations of the Al(III) and Cu(II) ions. When the sensor film is immersed in different Al(III) concentrations, a significant fluorescence enhancement of the CPFX at (427 nm) is observed. Furthermore, the fluorescence intensity of the red emission of the TFPP dye at (644 nm) does not alter. However, in the presence of Cu(II) ions, a considerable emission quenching of the CPFX peak at (427 nm) is observed. PVC provides a great permeability and penetration facilities of dissolved ions that make the sensor film sensitive to Al(III) or Cu(II) changes outside the matrix. The film displays immense sensitivity depending on their distinctive optical characteristics of CPFX and detection capabilities within a low detection limit LOD for Al(III) and Cu(II). The LOD values were estimated to be 2.05 x 10^-7 M and 1.04 x 10^-7 M respectively with a relative standard deviation RSD_r (1%, n=3). Density functional theory (DFT) and the time-dependent DFT (TDDFT) theoretical calculations were performed to study Cu(II) and Al(III) complexation structures and their electronic properties in solution and in the sensor film. The interference of the chemisensor film was examined using different cations and the chemisensor provides significant selectivity. We develop a new ratiometric chemisensor based on PVC polymer film for Al(III) and Cu(II) detection.

Tuning the excited-state intramolecular proton transfer (ESIPT) process of indole–pyrrole systems by π-conjugation and substitution effects: experimental and computational studies

A series of amino (NH)-type hydrogen-bonding (H-bonding) compounds, BNDAB-1–4, containing π-enlarged indole and β-ethoxycarbonyl-substituted pyrrole units were designed and synthesized.