Corrosion inhibition efficiency of some phosphoramide derivatives: DFT computations and MD simulations

Synergistic effect of KI on the corrosion inhibition of a poly(diallylammonium chloride)-based cyclocopolymer containing bis-cationic motifs for mild steel corrosion in 20% formic acid

This study entails the syntheses of a homopolymer, poly(diallylammonium chloride) (3), and copolymers (8a-c) containing hydrophilic/hydrophobic pendants and their role in mitigating mild steel in aggressive 20% formic acid, a type of corrosion that is not frequently discussed in the literature. The synthesized homopolymer and copolymers were characterized by FTIR, NMR, viscometry, and TGA. Inhibitor 8b was found to be the most potent, with 81.8% inhibition efficiency (IE) registered via the potentiodynamic polarization method for 100 ppm of inhibitor concentration at 30 °C. Inhibitor 8b, mixed with 2 mmol KI, showed more than 90% IE for a meager 1 ppm inhibitor concentration. For a synergism of 50 ppm inhibitor and 2 mmol KI, the IE reached a high value of 99.1%. The synergism was so good that it helped the inhibitor retain ∼100% of its original IE even after a 24 h weight loss study at 60 °C. The adsorption isotherm study showed that 8b followed the Langmuir adsorption isotherm and adsorbed via chemisorption. A very high value (2.48 × 105 L mol-1) of the equilibrium adsorption constant (Kads) indicated strong adsorption. XPS and SEM surface studies provided evidence of the inhibitor found on the metal surface. Some toxicological parameters, such as LC50, bioaccumulation factor, and developmental toxicity, have been measured computationally. A brief mechanistic insight into how the inhibitors functioned has been offered along with the DFT study.

Computational Insight of Phase Transformation and Drug Release Behaviour of Doxycycline-Loaded Ibuprofen-Based In-Situ Forming Gel

This research investigates the gel formation behaviour and drug-controlling performance of doxycycline-loaded ibuprofen-based in-situ forming gels (DH-loaded IBU-based ISGs) for potential applications in periodontal treatment. The investigation begins by exploring the physical properties and gel formation behaviour of the ISGs, with a particular focus on determining their sustained release capabilities. To gain a deeper understanding of the molecular interactions and dynamics within the ISGs, molecular dynamic (MD) simulations are employed. The effects of adding IBU and DH on reducing surface tension and water tolerance properties, thus affecting molecular properties. The phase transformation phenomenon is observed around the interface, where droplets of ISGs move out to the water phase, leading to the precipitation of IBU around the interface. The optimization of drug release profiles ensures sustained local drug release over seven days, with a burst release observed on the first day. Interestingly, different organic solvents show varying abilities to control DH release, with dimethyl sulfoxide (DMSO) demonstrating superior control compared to N-Methyl-2-pyrrolidone (NMP). MD simulations using AMBER20 software provide valuable insights into the movement of individual molecules, as evidenced by root-mean-square deviation (RMSD) values. The addition of IBU to the system results in the retardation of IBU molecule movement, particularly evident in the DMSO series, with the diffusion constant value of DH reducing from 1.2452 to 0.3372 and in the NMP series from 0.3703 to 0.2245 after adding IBU. The RMSD values indicate a reduction in molecule fluctuation of DH, especially in the DMSO system, where it decreases from over 140 to 40 Å. Moreover, their radius of gyration is influenced by IBU, with the DMSO system showing lower values, suggesting an increase in molecular compactness. Notably, the DH-IBU configuration exhibits stable pairing through H-bonding, with a higher amount of H-bonding observed in the DMSO system, which is correlated with the drug retardation efficacy. These significant findings pave the way for the development of phase transformation mechanistic studies and offer new avenues for future design and optimization formulation in the ISG drug delivery systems field.

Molecular engineering of several butterfly-shaped hole transport materials containing dibenzo[b,d]thiophene core for perovskite photovoltaics

Several butterfly-shaped materials composed of dibenzo[b,d]thiophene (DBT) and dibenzo-dithiophene (DBT5) cores were designed as hole transporting materials (HTMs) and their properties were studied by density functional theory (DFT) computations for usage in mesoscopic n-i-p perovskite solar cells (PSCs). To choose suitable HTMs, it was displayed that both of lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energies of molecules were located higher than those of CH₃NH₃PbI₃ (MAPbI₃) perovskite as they were able to transfer holes from the MAPbI₃ toward Ag cathode. Negative solvation energy (ΔE_solvation) values for all HTMs (within the range of - 5.185 to - 18.140 kcal/mol) revealed their high solubility and stability within CH₂Cl₂ solvent. The DBT5-COMe demonstrated the lowest values of band gap (E_g = 3.544) and hardness (η = 1.772 eV) (the greatest chemical activity) and DBT5-CF₃ displayed the biggest η = 1.953 eV (maximum stability) that were predominantly valuable for effective HTMs. All HTMs presented appropriately high LHEs from 0.8793 to 0.9406. In addition, the DBT5 and DBT5-SH depicted the lowest exciton binding energy (E_b) values of 0.881 and 0.880 eV which confirmed they could produce satisfactory results for the PSCs assembled using these materials. The DBT5-SH and DBT5-H had maximum hole mobility (μ_h) values of 6.031 × 10^-2 and 1.140 × 10^-2 which were greater than those measured for the reference DBT5 molecule (μ_h = 3.984 × 10^-4 cm²/V/s) and about 10 and 100 times superior to the calculated and experimental μ_h values for well-known Spiro-OMeTAD. The DBT5-COOH illustrated the biggest open circuit voltage (V_OC), fill factor (FF) and power conversion efficiency (PCE) values of 1.166 eV, 0.896 and 23.707%, respectively, establishing it could be as the best HTM candidate for high performance PSCs.

In Silico Approaches for Some Sulfa Drugs as Eco-Friendly Corrosion Inhibitors of Iron in Aqueous Medium

This paper addresses the prediction of the adsorption behavior as well as the inhibition capacity of non-toxic sulfonamide-based molecules, also called sulfa drugs, on the surface of mild steel. The study of the electronic structure was investigated through quantum chemical calculations using the density functional theory method (DFT) and the direct interaction of inhibitors with the iron (Fe) metal surface was predicted using the multiple probability Monte Carlo simulations (MC). Then, the examination of the solubility and the environmental toxicity was confirmed using a chemical database modeling environment website. It was shown that the presence of substituents containing heteroatoms able to release electrons consequently increased the electron density in the lowest unoccupied and highest occupied molecular orbitals (LUMO and HOMO), which allowed a good interaction between the inhibitors and the steel surface. The high values of EHOMO imply an ability to donate electrons while the low values of ELUMO are related to the ability to accept electrons thus allowing good adsorption of the inhibitor molecules on the steel surface. Molecular dynamics simulations revealed that all sulfonamide molecules adsorb flat on the metal surface conforming to the highly protective Fe (1 1 0) surface. The results obtained from the quantum chemistry and molecular dynamics studies are consistent and reveal that the order of effectiveness of the sulfonamide compounds is P7 > P5 > P6 > P1 > P2 > P3 > P4.

Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium

Thiophene derivatives, namely (E)-thiophene-2-carbaldehyde oxime (OXM) and (E)-5-(thiophen-2-yl)-1H-tetrazole (TET), were synthesized and characterized via¹H and ¹³C NMR. Furthermore, their inhibitory property for AA2024-T3 in 1 M HCl solution was investigated via electrochemical impedance spectroscopy and potentiodynamic polarization at 293 K, together with DFT/B3LYP-based calculations. Numerous global and local descriptors of reactivity such as EHOMO, ELUMO, energy gap, electronegativity (χ), hardness (η), and frontier molecular orbital repartitions were investigated to describe the reactivity of each molecule. Alternatively, Monte Carlo simulations were performed under the solvation condition on the Al (111) surface to understand the adsorption behavior of the as-studied inhibitors deeply. The inhibition efficiency increased with an increase in the inhibitor concentration, achieving maximum values of 94.0% and 96% at 10⁻³ M, respectively. The polarization curves showed that the examined compounds act as mixed-type inhibitors. In addition, the adsorption of these compounds obeyed the Al Awady, Flory-Huggins and Temkin isotherms. The surface characterization analysis via SEM/EDX confirmed the presence of a barrier layer covering the aluminum surface. The experimental inhibition efficiencies were correlated with global descriptors, which confirmed that this theoretical study is useful for the protection of aluminum alloy metal in an acidic medium.

Thiophene derivatives: thiophene-2-carbaldehyde oxime (OXM) and 5-(thiophen-2-yl)-1H-tetrazole (TET), were synthesized and characterized. Furthermore, their inhibitory property for AA2024-T3 in 1 M HCl solution was investigated via electrochemical and with theoretical study.

Molecular modelling of compounds used for corrosion inhibition studies: a review

Molecular modelling of organic compounds using computational software has emerged as a powerful approach for theoretical determination of the corrosion inhibition potential of organic compounds. Some of the common techniques involved in the theoretical studies of corrosion inhibition potential and mechanisms include density functional theory (DFT), molecular dynamics (MD) and Monte Carlo (MC) simulations, and artificial neural network (ANN) and quantitative structure-activity relationship (QSAR) modeling. Using computational modelling, the chemical reactivity and corrosion inhibition activities of organic compounds can be explained. The modelling can be regarded as a time-saving and eco-friendly approach for screening organic compounds for corrosion inhibition potential before their wet laboratory synthesis would be carried out. Another advantage of computational modelling is that molecular sites responsible for interactions with metallic surfaces (active sites or adsorption sites) and the orientation of organic compounds can be easily predicted. Using different theoretical descriptors/parameters, the inhibition effectiveness and nature of the metal-inhibitor interactions can also be predicted. The present review article is a collection of major advancements in the field of computational modelling for the design and testing of the corrosion inhibition effectiveness of organic corrosion inhibitors.

Enhancing the inhibition and adsorption performance of SABIC iron corrosion in sulfuric acid by expired vitamins. Experimental and computational approach

The inhibition potency of expired thiamine or vitamin B1 (VB1) and riboflavin or vitamin B2 (VB2) against SABIC iron corrosion in 0.5 M H₂SO₄ solutions was investigated using chemical and electrochemical techniques. Theoretical studies such as DFT and MC simulations were performed on both VB1 and VB2 inhibitors to obtain information related to the experimental results. It has been found that the inhibition efficacy assigned from all measurements used increases with increasing concentration of the two expired vitamins and reduces at elevated temperatures. It reached 91.14% and 92.40% at 250 ppm of VB1 and VB2, respectively. The inhibition was explicated by the adsorption of the complex formed between expired vitamins and ferrous ions on the SABIC iron surface. The adsorption was found to obey the Langmuir isotherm model. Galvanostatic polarization demonstrated that the two expired vitamins act as an inhibitor of the mixed type. These expired vitamins have proven effective in inhibiting the pitting corrosion induced by the presence of Cl^- ions. The pitting potential is transferred to the positive values showing resistance to pitting damage. The theoretical parameter values are consistent with experimental results.

Supramolecular salts assembled by melamine and two organic hydroxyl acids: synthesis, structure, hydrogen bonds, and luminescent property

Two novel supramolecular salts are synthesized by melamine and organic hydroxyl carboxylic acids. The structure prediction, purity, luminescent property, and thermal stability are investigated by theoretical and experimental analysis.

Polymer Nanocomposite-based Coatings for Corrosion Protection

Corrosion of metals induces enormous loss of material performance and increase of cost, which has been a common and intractable issue that needs to be addressed urgently. Coating technology has been acknowledged to be the most economic and efficient approach to retard the metal corrosion. For several decades, polymers have been recognized as an effective anticorrosion coating material in both industries and scientific communities, as they demonstrate good barrier properties, ease of altering properties and massive production. Nanomaterials show distinctively different physical and chemical properties compared with their bulk counterparts, which have been considered as highly promising functional materials in various applications, impacting virtually all the fields of science and technologies. Recently, the introduction of nanomaterials with various properties into polymer matrix to form a polymer nanocomposite has been devoted to improve anticorrosive ability of polymer coatings. In this review article, we highlight the recent advances and synopsis of these high-performance polymer nanocomposites as anticorrosive coating materials. We expect that this work could be helpful for the researchers who are interested in the development of functional nanomaterials and advanced corrosion protection technology.