Experimental/computational assessments of API steel in 6 M H2SO4 medium containing novel pyridine derivatives as corrosion inhibitors

Current Overview of Corrosion Inhibition of API Steel in Different Environments

API (American Petroleum Institute) steels are the most employed metal alloys in the oil industry due to their outstanding mechanical properties; however, their protection is considered as an imperative matter because of their corrosion damage vulnerability when exposed to different surroundings that provoke a rate increase in the concomitant redox reactions. This problematic situation becomes more relevant when the generation and/or use of one or various aqueous corrosive environments occur, in addition to process conditions, the result of which is extremely difficult to be controlled. For these reasons, the internal and external protection of exposed metallic systems are considered as a fundamental concern, where internal corrosion is often controlled through the addition of corrosion inhibitors (CIs). The present review analyzes researchers' contributions in the last years to the study and evaluation of CIs for API steel in different corrosive media featuring HCl, H2SO4, H3NSO3H, CO2, H2S, NaCl, and production water under different temperature and flow conditions. Different CIs derived from plant extracts, drugs, nanoparticles, or ionic liquids, mainly destined for acid media, were found. Throughout the review, an exhaustive analysis of inhibition process results is carried out based on gravimetric and/or electrochemical techniques that consider the weight loss of the metallic material and electrical behavior (current density, resistance, capacitance, frequency, impedance, etc.). Likewise, the results of computational analyses and those of surface analysis techniques were taken into account to reinforce the study of CIs.

Novel pyridine bearing pentose moiety-based anticancer agents: design, synthesis, radioiodination and bioassessments

Pyridine compounds are one of the most important heterocyclic derivatives showing wide ranges in biological and pharmacological activities. Green chemistry eliminates or reduces the generation of hazardous compounds. It prevents pollution at a molecular level. The microwave technique used in heterocyclic compound synthesis is also an important branch of green chemistry techniques. In this study, we report designing and synthesizing a new pyridine-bearing pentose moiety via a one-pot multicomponent reaction using D-glucose and also investigate its behavior and reactivity toward some simple and heterocyclic amino derivatives. The chemical structures of the synthesized compounds were characterized and tested for their cytotoxic activities. Some of the test compounds exhibited slight to high cytotoxic activities against Caco2 (colon cancer) cells, HepG2 (hepatocellular carcinoma) cells and MCF-7 (human breast cancer) cells by MTT assay. The results showed clearly that compound 4 and compound 8 displayed strongest to moderate cytotoxic activity against the HepG2, Caco2 and MCF-7 respectively and compound 1 showed good activity against MCF-7 in comparison to the standard anticancer drug doxorubicin. These data were by cytopathological examination. An in-vivo radioactive tracing study of compound 4 proved its targeting ability to sarcoma cells in a tumor-bearing mice model. Our findings suggest that the synthesized compounds may be promising candidates as novel anticancer agents.

Frontiers and advances in N-heterocycle compounds as corrosion inhibitors in acid medium: Recent advances

The acid solution is widely used in chemical cleaning, oil well acidifying, and other fields, which also brings the problem of metal corrosion that cannot be underestimated. However, adding an inhibitor is one of the most convenient and effective ways to slow down metal corrosion. N-heterocyclic compounds with high stability and durability, in line with the strategy of sustainable development, have been widely studied in an acidic environment. Imidazole, pyridine, and quinoline compounds, as the most commonly used corrosion inhibitors, can form a compact protective film via π electron cloud shifting towards the N atoms to generate coordination function. In particular, flexible modifiability makes N-heterocyclic compounds adapt to different corrosion environments readily, conducive to the formation of chemical bonds between compounds with metal surfaces to be better adsorption, so as to avoid the blemish of traditional inhibitors (such as inorganic salt and organic amines inhibitors) due to excessive usage, surface roughness of metal or environmental factor (for instance, temperature, pH and metallic) causing loose bonding between film and metal surface. More importantly, the efficient corrosion inhibition and toxicity of N-heterocyclic compounds have close to do with their own functional groups. Combined with the latest research achievement, the effects of different substituents on the corrosion inhibition and corrosion inhibition mechanisms were systematically reviewed in the acid-corrosive solution of imidazole, pyridine, and quinoline and their derivatives in this review article, respectively. In addition, the application and function of density functional theory in predicting the corrosion inhibition effect of corrosion inhibitors are also discussed. The future development trend was prospected according to the summarized research results.

Green synthesis of highly functionalized heterocyclic bearing pyrazole moiety for cancer-targeted chemo/radioisotope therapy

New derivatives of heterocyclic bearing pyrazole moiety were synthesized (eight new compounds from 2 to 9) via green synthesis methods (microwave-assisted and grinding techniques). 4,6-Diamino-1,3-diphenyl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile (2) shows high anti-cancer activity against both HepG2 and HCT-116 with IC50 of 9.2 ± 2.8 and 7.7 ± 1.8 µM, respectively, which referenced to 5-Fu which is showing activity of 7.86 ± 0.5 and 5.35 ± 0.3 against both HepG2 and HCT-116, respectively. The cytotoxic activity against HCT-116 and HepG2 was slightly decreased and slightly increased, respectively, by a different pyrazole moiety (compound 5). Pharmacokinetics of compound 2 was carried out using the radioiodination technique in tumour-bearing Albino mice which shows good uptake at the tumour site. The biodistribution showed high accumulation in tumour tissues with a ratio of 13.7% ID/g organ after one hour in comparison with 2.97% ID/g organ at normal muscle at the same time point. As I-131 has maximum beta and gamma energies of 606.3 and 364.5 keV, respectively, therefore the newly synthesized compound 2 may be used for chemotherapy and TRT.

Corrosion inhibition properties of schiff base derivative against mild steel in HCl environment complemented with DFT investigations

There is growing interest in using corrosion inhibitors and protective treatments to limit the degradation of mild steel, leading to the development of numerous Schiff bases as cutting-edge inhibitors. In this study, the effectiveness of a Schiff base, 3-((5-mercapto-1,3,4-thiadiazol-2-yl)imino)indolin-2-one (MTIO), to prevent mild steel corrosion in HCl was investigated using weight loss measurements, potentiodynamic polarization measurements, electrochemical impedance spectroscopy techniques, and surface characterization. The experimental results showed that 0.5 mM MTIO exhibited a satisfactory inhibitor efficiency of 96.9% at 303 K. The MTIO molecules physically and chemically adsorbed onto the mild steel surface following the Langmuir model, forming a compact protective film attributed to the presence of a thiazole ring in the MTIO structure. Theoretical calculations were combined with experimental techniques to investigate the anticorrosion performance and mechanism of inhibition.

Experimental and Computational Exploration of Chitin, Pectin, and Amylopectin Polymers as Efficient Eco-Friendly Corrosion Inhibitors for Mild Steel in an Acidic Environment: Kinetic, Thermodynamic, and Mechanistic Aspects

Herein, the inhibition impacts of chitin, pectin, and amylopectin as carbohydrate polymers on the corrosion of mild steel in 0.5 M HCl were researched utilizing various experimental and theoretical tools. The acquired outcomes showed that the inhibition efficiencies (% IEs) of the tested carbohydrate polymers were increased by raising their concentrations and these biopolymers acting as mixed-kind inhibitors with major anodic ones. The acquired % IEs values were reduced with rising temperature. The higher % IEs of the tested polymers were inferred via powerful adsorption of the polymeric molecules on the steel surface and such adsorption obeyed the Langmuir isotherm. The computed thermodynamic and kinetic quantities confirmed the mechanism of physical adsorption. The kinetics and mechanisms of corrosion and its protection by polymeric compounds were illuminated. The results obtained from all the techniques used confirmed that there was good agreement with each other, and that the % of IEs followed the sequence: chitin > amylopectin > pectin.

Growth Inhibition of Sulfate-Reducing Bacteria during Gas and Oil Production Using Novel Schiff Base Diquaternary Biocides: Synthesis, Antimicrobial, and Toxicological Assessment

Upstream crude oil production equipment is always exposed to destruction damagingly which is caused by sulfate-reducing bacterium (SRB) activities that produce H₂S gas, which leads to increased metal corrosion (bio-fouling) rates and inflicts effective infrastructure damage. Hence, oil and gas reservoirs must be injected with biocides and inhibitors which still offer the foremost protection against harmful microbial activity. However, because of the economic and environmental risks associated with biocides, the oil and gas sectors improve better methods for their usage. This work describes the synthesis and evaluation of the biological activities as the cytotoxicity and antimicrobial properties of a series of diquaternary cationic biocides that were studied during the inhibition of microbial biofilms. The prepared diquaternary compound was synthesized by coupling vanillin and 4-aminoantipyrene to achieve the corresponding Schiff base, followed by a quaternization reaction using 1,6-bromohexane, 1,8-bromooctane, and 1,12-bromododecane. The increase of their alkyl chain length from 6 to 12 methylene groups increased the obtained antimicrobial activity and cytotoxicity. Antimicrobial efficacies of Q1-3 against various biofilm-forming microorganisms, including bacteria and fungi, were examined utilizing the diameter of inhibition zone procedures. The results revealed that cytotoxic efficacies of Q1-3 were significantly associated mainly with maximum surface excess and interfacial characteristics. The cytotoxic efficiencies of Q1-3 biocides demonstrated promising results due to their comparatively higher efficacies against SRB. Q3 exhibited the highest cytotoxic biocide against the gram +ve, gram -ve, and SRB species according to the inhibition zone diameter test. The toxicity of the studied microorganisms depended on the nature and type of the target microorganism and the hydrophobicity of the biocide molecules. Cytotoxicity assessment and antimicrobial activity displayed increased activity by the increase in their alkyl chain length.

Computational Foretelling and Experimental Implementation of the Performance of Polyacrylic Acid and Polyacrylamide Polymers as Eco-Friendly Corrosion Inhibitors for Copper in Nitric Acid

Copper is primarily used in many industrial processes, but like many other metals, it suffers from corrosion damage. Polymers are not only one of the effective corrosion inhibitors but also are environmentally friendly agents in doing so. Hence, in this paper, the efficacy of two polyelectrolyte polymers, namely poly(acrylic acid) (PAA) and polyacrylamide (PAM), as corrosion inhibitors for copper in molar nitric acid medium was explored. Chemical, electrochemical, and microscopic tools were employed in this investigation. The weight-loss study revealed that the computed inhibition efficiencies (% IEs) of both PAA and PAM increased with their concentrations but diminished with increasing HNO₃ concentration and temperature. The results revealed that, at similar concentrations, the values of % IEs of PAM are slightly higher than those recorded for PAA, where these values at 298 K reached 88% and 84% in the presence of a 250 mg/L of PAM and PAA, respectively. The prominent IE% values for the tested polymers are due to their strong adsorption on the Cu surface and follow the Langmuir adsorption isoform. Thermodynamic and kinetic parameters were also calculated and discussed. The kinetics of corrosion inhibition by PAA and PAM showed a negative first-order process. The results showed also that the used polymers played as mixed-kind inhibitors with anodic priority. The mechanisms of copper corrosion in nitric acid medium and its inhibition by the tested polymers were discussed. DFT calculations and molecular dynamic (MD) modelling were used to investigate the effect of PAA and PAM molecular configuration on their anti-corrosion behavior. The results indicated that the experimental and computational study are highly consistent.

Highly Efficient Elimination of Pb+2 and Al+3 Metal Ions from Wastewater Using Graphene Oxide/3,5-Diaminobenzoic Acid Composites: Selective Removal of Pb2+ from Real Industrial Wastewater

In this study, graphene oxide (GO) was functionalized with 3,5-diaminobenzoic acid (DABA) by a one-step method to produce functionalized graphene oxide (FGO). FGO is a new type of absorbent crystalline substance that has a high surface area and a large porosity site as well as a large number of dentate functional groups which lead to enhanced adsorption performance for heavy metal ions. The adsorption efficiency of FGO for Pb⁺² and Al⁺³ metal ions was extra satisfactory when compared with GO due to the ease of design and the homogeneous structure of FGO. The structure of synthesized GO and FGO was confirmed by different techniques such as FTIR, XRD, TGA, BET nitrogen adsorption-desorption methods, and TEM analyses. The mass of utilized adsorbents, the pH of the medium, the concentration of ionic species in the medium, temperature, and process time were all investigated as variables in the adsorbent procedure. The experimental data recorded that the maximum adsorption efficiency of the 0.5 g/L FGO composite was 99.7 and 99.8% for Pb⁺² and Al⁺³ metal ions, respectively, while in the case of using GO, the maximum adsorption efficiency was 92.6 and 91.9% at ambient temperature in a semineutral medium at pH 6 after 4 h. The adsorption results were in good conformity with the Freundlich model and pseudo-second-order kinetics for Pb⁺² and Al⁺³ metal ions. Also, the reusability study indicates that FGO can be used repeatedly at least for five cycles with a slight significant loss in its efficiency.

Synthesis and Corrosion Inhibition Performance of Mannich Bases on Mild Steel in Lactic Acid Media

Heterocyclic Mannich bases, N-(3-oxo-3-phenylpro-pyl)thiazol-2-aminium chloride (DTZA) and N-(3-oxo-3-phenylpropyl)-1H-pyrazol-3-aminium chloride (DPZA), were developed for the corrosion inhibition of N80 steel in a 15 wt % lactic acid solution. Weight loss measurements, electrochemical techniques, surface characterization, and theoretical calculations were combined to investigate their anticorrosion performance and mechanism. The results showed that DTZA exhibited a satisfactory inhibitor efficiency of 97.56% with a dosage of 0.15% at 363 K, while DPZA achieved only 58.3% under the same conditions. Adsorptions of both inhibitors on the metal surface followed the Langmuir model with physical and chemical adsorptions. Based on X-ray photoelectronic spectroscopy (XPS) analysis, DFT calculations, and molecular dynamics (MD) simulations, stronger interactions between DTZA and iron than those in the case of DPZA were revealed, leading to the formation of a compact protective film on the metal surface, which is attributed to the presence of a thiazole ring in the DTZA chemical structure.

Environmental Remediation through Catalytic Inhibition of Steel Corrosion by Schiff’s Bases: Electrochemical and Biological Aspects

The environmental impact of corrosion is very dangerous and consumes much of world’s efforts and funds. This work discusses the safeguarding of the environment, metals, and metal-infra structures by efficient Schiff’s base inhibitors. The corrosion inhibitors [(1E,3E)-N1,N3-dibutyl-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-I) and [(1Z,3Z)-N1,N3-bis(4-methylhexan-2-yl)-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-II) were successfully synthesized and evaluated for the protection of API 5L X65 steel (CS) in 1 M HCl media using electrochemical techniques, SEM/EDS, and quantum chemical calculations. GSB-I and GSB-inhibitory I’s efficiency is proportional to the concentration of the test. In the presence of 1 mM GSB-I and GSB-II, the maximum inhibitory efficiency was determined to be 90.6 and 93.8 percent, respectively. According to potentiodynamic polarization tests, the two compounds are effective inhibitors of mixed-type corrosion. The physisorption and chemisorption of both inhibitors followed the Langmuir adsorption isotherm on CS surfaces. The biological reactivity of both GSB has been examined, and encouraging results have been obtained as antifungal, antibacterial, and biocidal agents against sulfate-reducing bacteria (SRB). In addition, using DFT calculations and molecular dynamic (MD) simulation, the effect of GSB-I and GSB-II molecular configuration on corrosion inhibition behavior in acidic environments was investigated.

Conventional and microwave-assisted synthesis, anticancer evaluation, 99mTc-coupling and In-vivo study of some novel pyrazolone derivatives

New pyrazolone derivatives were successfully synthesized by both microwave-assisted and conventional techniques. Compound 3 (3-(3-Methyl-5-oxo-4,5-dihydro-1H-pyrazol-1-yl)-3-oxopropanehydrazide) displayed remarkable anti-cancer activity (IC₅₀ obtained at 8.71 and 10.63 µM for HCT-116 and MCF-7, respectively. Moreover, biodistribution study using radiolabeling approach revealed a remarked uptake of [^99mTc]Tc-compound 3 complex into tumour induced in mice. The biodistribution showed high accumulation in tumour tissues with T/NT of 6.92 after 60 min post injection. As a result of these promising data, the newly synthesized compounds especially compound 3 affords a potential radio-carrier that could be used as a tumour marker and can be used for cancer therapy after further preclinical studies.

Effect of Reaction Parameters on Catalytic Pyrolysis of Waste Cooking Oil for Production of Sustainable Biodiesel and Biojet by Functionalized Montmorillonite/Chitosan Nanocomposites

The use of waste oils as pyrolysis feedstocks to manufacture high-grade biofuels has prompted researchers to focus on developing renewable energy to overcome the depletion of fossil fuel supplies and the global warming phenomena. Because of their high hydrogen and volatile matter concentration, waste oils are ideal raw materials for the production of biofuels. It is challenging to attain satisfactory results with conventional methods, such as transesterification, gasification, solvent extraction, and hydrotreating due to flaws such as high energy demand, long time, and high operating costs. Catalytic pyrolysis of waste edible oils was employed as a resource for the generation of biodiesel. The application of the catalytic cracking process has the potential to alleviate the existing situation. In this study of catalytic cracking conversion of waste cooking oil to produce different biofuels, grades were investigated using two heterogeneous catalysts. The catalysts were activated montmorillonite (PAMMT) clay and its modified form using a chitosan biopolymer (PAMMT-CH) nanocomposite. The catalysts were identified using infrared spectroscopy, X-ray diffraction patterns, transmittance electron microscopy images, surface area, and thermal stability. The catalysts were tested for their performances using different amounts (0.1-1% by weight) at a temperature assortment of 200-400 °C during a time range of 60-300 min. The experimental studies were carried out in a batch reactor. GC mass spectra were used to investigate the catalytic cracking products. Fractional distillation is used to separate the final products from various reaction conditions. The physicochemical properties of resulting biofuels were profiled by quantifying their densities, viscosities, specific gravities, pour points, flash and fire points, cetane numbers, carbon and ash residues, and sulfur contents. The optimum conditions of the yield product were 300 and 400 °C, catalyst weights of 0.7 and 0.8% w/v, and reaction times of 120 and 180 min concerning the (PAMMT) and (PAMMT-CH) nanocomposite, respectively. The determined properties were located within the limits of the specific standards of ASTM specifications. As a result, the PAMMT nanocomposite produced biofuel comparable to biodiesel according to ASTM specifications, while the PAMMT-CH nanocomposite produced biofuel comparable to biojet.

Insights into the newly synthesized N-doped carbon dots for Q235 steel corrosion retardation in acidizing media: A detailed multidimensional study

N-doped carbon quantum dots (NCQDs) were synthesized by a hydrothermal method using folic acid and o-phenylenediamine as precursors. The inhibition behaviour of the NCQDs on Q235 steel in 1 M HCl solution was appraised through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curves (PDP), and surface analysis. The results demonstrated that the synthesized NCQDs had an effective anticorrosion effect on Q235 steel, and the corrosion inhibition efficiency of 150 mg/L NCQDs reached 95.4%. Additionally, the analysis of the PDP corrosion potential changes indicated that the NCQDs acted as a mixed corrosion inhibitor. Moreover, the NCQDs adsorbed onto the surface of steel by coordinating its electron-rich atoms with the iron metal to form a protective film, which slowed the dissolution reaction of the anodic metal to achieve corrosion inhibition. The adsorption mechanism of the NCQDs was consistent with Langmuir adsorption, including physical and chemical adsorption. Therefore, this work can inspire and facilitate, to a certain extent, the future application of doped carbon quantum dots as efficient corrosion inhibitors in pickling solutions.