Designing of hydroxyl terminated triazine-based dendritic polymer/halloysite nanotube as an efficient nano-adsorbent for the rapid removal of Pb(II) from aqueous media

Spectroscopic and statistical physics elucidation for Cu(II) remediation using magnetic bio adsorbent based on Fe3O4-chitosan-graphene oxide

Efficient harnessing of heavy metal pollution is an urgent environmental task. Herein, magnetic bio adsorbent (MB) based on Fe3O4-chitosan-graphene oxide composite was fabricated via one step co-precipitation for adsorptive remediation of Cu(II). Remediation efficiency was evaluated by batch adsorption, meanwhile adsorption mechanism was elucidated by spectroscopic tests (XPS, UV-Vis absorption and fluorescent emission spectra), statistical physics formalism, isotherm and kinetic fittings. Results show, MB reaches adsorption percent and quantity of 87.61 % and 350.43 mg·g-1 for Cu(II) in 30 min. By virtue of paramagnetism, MB can be readily recovered with a permanent magnet for easy regeneration and cyclic use, thereby retaining adsorption quantity 279.99 mg·g-1 at the fifth cycle. The Freundlich and pseudo second order model satisfactorily describes the adsorption, designating chemical interaction as the rate limiting step. Statistical physics calculation suggests two points. (1) Multi-ionic adsorption mechanism with exothermic, spontaneous and energy lowering feature. (2) Density of adsorption sites increases with temperature, resulting in improved adsorption capacity. Spectroscopic analysis confirms the involvement of CO, CO, -NH2 in Cu(II) uptake via electron donation. These explorations contribute with novel theoretical illumination for understanding both the thermodynamic feature and atomic scale mechanism of common pollutants adsorption by bio adsorbent like Fe3O4-chitosan-graphene oxide.

New sulfonated covalent organic framework for highly effective As(III) removal from water

The goal of taking out As(III) from water is to reduce the detriment that poisonous metals can do to people and nature. A substance that can absorb As(III), TFPOTDB-SO3H, was made by combining 2,5-diaminobenzenesulfonic acid and 2,4,6-tris-(4-formylphenoxy)-1,3,5-triazine in a reaction that joins molecules together. This substance can adsorb As(III) very well and has excellent qualities like being easy to use again, separate substances, and filter out liquids. At pH = 8 and at room temperature, TFPOTDB-SO3H adsorbed a lot of As(III). It achieved a removal rate of 97.1 % within 10 min and could adsorb up to 344.8 mg/g. A research was conducted to investigate the effect of co-existing anions on the elimination of arsenic. The findings indicated that the presence of anions had a minimal adverse impact, reducing As(III) uptake by approximately 1-7 %. The kinetics of the uptake process were found to be controlled by the quasi-second order kinetic model, while the Langmuir isotherm model validated that the mechanism for As(III) removal was monolayer chemisorption. According to the thermodynamic analysis, the adsorption process was endothermic and occurred spontaneously. Moreover, even after 4 successive adsorption-desorption cycles, the adsorbent preserved a substantial uptake productivity of 88.86 % for As(III). The results collectively indicate that TFPOTDB-SO3H holds considerable promise for the efficient adsorption and elimination of As(III) ions from wastewater.

Exploring Polyol-Functionalized Dendrimers with Silsesquioxane Cores

Silsesquioxane dendrimers offer versatile structural potential, prompting our innovative synthesis of G1 and G2 polyol dendritic systems with diverse silsesquioxane cores, ranging from mono-T8 to difunctional and tetrafunctional double-decker silsesquioxanes. Through a strategic combination of hydrosilylation and O-silylation reactions, we have formed an extensive compound library. A major focus was directed toward investigating the reaction conditions of G1.5 dendrimers, as well as evaluating the stability and reactivity of the novel -O-Me2Si-H group. Notably, we unveiled solubility trends of these synthesized dendritic systems in basic organic solvents, offering vital information for potential applications. Our work advances dendrimer research by unraveling intricate synthesis, reactivity, and properties. We contribute to the broader understanding of these organic-inorganic complex interactions and envisage diverse applications in multiple domains.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

New Approaches for Pb(II) Removal from Aqueous Media Using Nanopowder Sodium Titanosilicate: Kinetics Study and Thermodynamic Behavior

Microporous sodium titanosilicate, Na2TiSiO5, has been successfully prepared using the sol-gel method. The structural and morphological characterization of synthesized product has been made via thermal analyses (TG-DTG), X-ray diffraction (XRD), and electron microscopy (SEM and TEM). Adsorption properties of the synthesized Na2TiSiO5 nanopowder for Pb(II) removal of aqueous media was investigated in different experimental conditions such as the contact time, the initial metal concentration, the pH, and the temperature. The Pb(II) adsorption on Na2TiSiO5 was discussed according to the kinetics and thermodynamics models. The adsorption kinetics of Pb(II) have been better described by the PS-order kinetic model which has the highest fitting correlation coefficients (R2: 0.996-0.999) out of all the other models. The adsorption results have been successfully fitted with the Langmuir and Redlich-Paterson models (R2: 0.9936-0.9996). The calculated thermodynamic parameters indicate that the Pb(II) adsorption is an endothermic process, with increased entropy, having a spontaneous reaction. The results have revealed a maximum adsorption capacity of 155.71 mg/g at 298 K and a very high adsorption rate at the beginning, more than 85% of the total amount of Pb(II) being removed within the first 120 min, depending on the initial concentration.

Novel chitosan/citric acid modified pistachio shell/halloysite nanotubes cross-linked by glutaraldehyde biocomposite beads applied to methylene blue removal

In this study, Cht/PS-CA/HNT biocomposite adsorbent was synthesized using halloysite nanotube as nanomaterial, chitosan which is a biodegradable and biocompatible biopolymer, pistachio shell as biomass source, citric acid as biomass modifier. The removal of methylene blue dyestuff on the synthesized new Cht/PS-CA/HNT from the aqueous medium by adsorption method was investigated. Experimental parameters such as dye concentration, contact time, amount of adsorbent, solution pH and temperature, which affect the adsorption process, were investigated. The adsorption experimental data were analyzed with the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms, which are widely used in aqueous solutions, and it was decided that Langmuir is the most suitable isotherm. The maximum adsorption capacity of the monolayer was calculated to be 111.14 mg/g. Optimum contact time and adsorbent dose were determined as 90 min and 1 g/L. Adsorption experimental data were applied for Pseudo-first-order and Pseudo-second-order kinetic models and it was decided that the most suitable kinetic model was pseudo-second-order. Thermodynamic evaluation of adsorption showed that adsorption is endothermic and adsorption is spontaneous.

Postsynthetic Modification of Core-Shell Magnetic Covalent Organic Frameworks for the Selective Removal of Mercury

Core-shell magnetic covalent organic framework (COF) materials were prepared, followed by shell material functionalization with different organic ligands, including thiosemicarbazide, through a postsynthetic modification approach. The structures of the prepared samples were characterized with various techniques, including powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), photoinduced force microscopy (PiFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and solid ¹³C NMR. PXRD and BET studies revealed that the crystalline and porous nature of the functionalized COFs was well maintained after three steps of postsynthetic modification. On the other hand, solid ¹³C NMR, TGA, and PiFM analyses confirmed the successful functionalization of COF materials with good covalent linkage connectivity. The use of the resulting functionalized magnetic COF for selective and ultrafast adsorption of Hg(II) has been investigated. The observations displayed rapid kinetics with adsorption dynamics conforming to the quasi-second-order kinetic model and the Langmuir adsorption model. Furthermore, this prepared crystalline magnetic material demonstrated a high Langmuir Hg(II) uptake capacity, reaching equilibrium in only 5 min. Thermodynamic calculations proved that the adsorption process is endothermic and spontaneous.

The one-step synthesis of a novel metal-organic frameworks for efficient and selective removal of Cr(VI) and Pb(II) from wastewater: Kinetics, thermodynamics and adsorption mechanisms

The removal of Cr(VI) and Pb(II) from wastewater is one of the methods to ensure water safety. However, it is still a difficult point to design efficient and selective adsorbent. In this work, Cr(VI) and Pb(II) were removed from water by a new metal-organic frameworks material (MOF-DFSA) with numerous adsorption sites. The max adsorption capacities of MOF-DFSA were 188.12 mg/g for Cr(VI) after 120 min and 349.09 mg/g for Pb(II) within 30 min. MOF-DFSA showed good selectivity and reusability after four cycles. The adsorption of MOF-DFSA was an irreversible process with multi-site coordination, and an active site adsorbed 1.798 Cr (VI) and 0.395 Pb (II). Kinetic fitting showed that the adsorption was chemisorption and surface diffusion was the main limiting step. Thermodynamic showed that Cr(VI) adsorption was enhanced at higher temperatures by spontaneous processes while Pb(II) was weakened. The chelation and electrostatic interaction of the hydroxyl and nitrogen-containing groups of MOF-DFSA with Cr(VI) and Pb(II) is the predominant mechanism, while the reduction of Cr(VI) also play an important role in adsorption. In conclusion, MOF-DFSA was a sorbent that can be used for the removal of Cr(VI) and Pb(II).