Synthesis, structure and fluorescent sensing for nitrobenzene of a Zn-based MOF

Nitrogen-enriched flexible metal-organic framework for CO2 adsorption

A novel MOF named [Zn2(L)(DMF)] was synthesized using solvothermal methods from the reaction of the new linker (4,4',4''-(4,4',4''-(benzene-1,3,5-triyltris(methylene))tris(3,5-dimethyl-1H-pyrazole-4,1-diyl))tribenzoic acid) and Zn(NO3)2·6H2O. This new MOF was characterized by means of different techniques: powder X-ray diffraction, N2 adsorption and desorption isotherms, thermogravimetric analysis, and scanning electron microscopy. Furthermore, suitable crystals were obtained, which allowed us to perform the X-Ray structure determination of this MOF. The capability of these new MOF to adsorb CO2 at different temperatures was measured and its isosteric enthalpy of adsorption was calculated. The novel MOF shows an uncommon node composed of a Zn3(-COO)6(DMF)2, and the asymmetric unit contains one crystallographically independent linker, one DMF molecule, and two Zn atoms. The [Zn2(L)(DMF)] MOF is a microporous material with high crystallinity and stability up to 250 °C. The multiple nitrogenated pyrazole linkers in its framework enhance its CO2 adsorption capabilities. This material exhibits a low CO2 isosteric enthalpy of adsorption (Hads), comparable to previously reported values for similar nitrogenated materials. All the observed CO2 adsorption capacities were further supported by DFT calculations.

High-sensitively fluorescent switch-type sensing for Ag+ and halide anions of 2D Cd-based network constructed with logic gates

Effective detection of the concentration of Ag+ ions in bactericidal fluid is one of the necessary conditions for their effective utilization for sterilization. A novel 2D Cd(II) coordination polymer (CP1), named as [Cd(HDPN)(4,4'-bbpy)]·2H2O, was hydrothermally synthesized using 5-(2',4'-dicarboxylphenyl) nicotic acid (H3DPN) and 4,4'-bis(imidazolyl)biphenyl (4,4'-bbpy). The structure analysis discovered that CP1 possessed a 2D network structure of dinuclear inorganic building blocks. Fluorescence sensing discovered that CP1 could high-sensitively detect Ag+, tetracycline, nitrobenzene and pyrimethanil and the lowest limit of detection (LOD) were 1.44 × 10-8M, 2.15 × 10-8M, 8.09 × 10-8M, and 2.54 × 10-7M, respectively. It is worth noting that the quenching occurs after the addition of Ag+ to the aqueous solution of CP1, and then it gradually recovers when one of the halide anions (X- = Cl-, Br- and I-) is added, forming a unique "on-off-on" fluorescence sensor for Ag+ and constructing a simple logic gate. The fluorescence sensing mechanism of CP1 was investigated using ultraviolet-visible spectroscopy, PXRD, XPS, and DFT methods. The research indicates that CP1 is anticipated to serve as an excellent multifunctional fluorescence sensor, especially as a switch-type sensor for Ag+ and the halide anions.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Reversible Acid-Base Long Persistent Luminescence Switch Based on Amino-Functionalized Metal-Organic Frameworks

Metal-organic frameworks (MOFs) with long persistent luminescence (LPL) have attracted extensive research attention from researchers due to their potential applications in information encryption, anticounterfeiting technology, and security logic. In contrast to short-lived fluorescent materials, LPL materials offer a visible response that can be easily distinguished by the naked eye, thereby facilitating a much clearer visualization. However, there are few reports on functional LPL MOF materials as probes. In this article, two amino-functional LPL MOFs (VB4-2D and VB4-1D) were synthesized. They both exhibited adjustable fluorescence and phosphorescence from blue to green and from cyan to green, respectively. Notably, the MOFs emitted bright and adjustable LPL upon the removal of the different radiation sources. The basic amino functional groups in the MOFs exhibited acid and ammonia sensitivity, and fluorescence and phosphorescence emission intensities can be burst and restored in two atmospheres, respectively, which can be cycled multiple times. Furthermore, LPL intensity undergoes switching between two different conditions as well, which can be visually discerned by the naked eye, enabling visual sensing of volatiles by LPL. This combination of photoluminescence and the visual LPL switching behavior of acids and bases in functional MOFs may provide an effective avenue for stimulus response, anticounterfeiting, and encryption applications.

Detection of organic arsenic based on acid-base stable coordination polymer

Organic arsenic, usually found in animal feed and livestock farm wastewater, is a carcinogenic and life-threatening substance. Hence, for the rapid and sensitive detection of organic arsenic, the development of new fluorescent sensors is quite essential. Here, an acid-base stable coordination polymer (HNU-62) was constructed by the introduction of hydrophobic fluorescence ligand, which can be used as a highly selective sensor for the detection of roxarsone (ROX) in water. The limit of detection (LOD) of HNU-62 for ROX was 4.5 × 10^-6 M. Furthermore, HNU-62 also exhibits good anti-interference and recyclability, which can be used in detecting ROX in real samples of pig feed. This work provides an alternative approach for the construction of water-stable coordination polymer-based fluorescence sensors.

Two bis-ligand-coordinated Zn(ii)-MOFs for luminescent sensing of ions, antibiotics and pesticides in aqueous solutions

Two organometallic complexes with two and three-dimensional architectures were constructed by using multiple ligands and Zn(ii) ions: [Zn3(BTC)2(DTP)4(H2O)2]·(H2O)4 (Zn-1) (BTC = benzene-1,3,5-tricarboxylic acid and DTP = 3,5-di(1,2,4-triazol-1-yl)pyridine) and [Zn2(NTD)2(DTP)] (Zn-2) (NTD = 1,4-naphthalenedicarboxylic acid). The as-prepared complexes were characterized by single-crystal X-ray diffraction (SCXRD), elemental analysis, powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and fluorescence analysis. Fluorescence sensing tests revealed that the two complexes are effective, sensitive and selective toward cationic Fe3+ and anionic MnO4 - and Cr2O7 2-. During the antibiotic sensing process, cefixime (CFX) for Zn-1 and nitrofurantoin (NFT) for Zn-2 exhibited the highest quenching efficiencies. For sensing pesticides, the highest quenching efficiencies were exhibited by imidacloprid (IMI) toward Zn-1 and Zn-2. The fluorescence quenching of the complexes that was induced by antibiotics, pesticides and MnO4 - was attributed to both the inner filter effect (IFE) and the fluorescence resonance energy transfer (FRET) effect.

The Evolution in Electrochemical Performance of Honeycomb-Like Ni(OH)2 Derived from MOF Template with Morphology as a High-Performance Electrode Material for Supercapacitors

Ni(OH)2 derived from an MOF template was synthesized as an electrode material for supercapacitors. The electrochemical performance of the electrode was adjusted by effectively regulating the morphology of Ni(OH)2. The evolution of electrochemical performance of the electrode with morphology of Ni(OH)2 was highlighted in detail, based on which honeycomb-like Ni(OH)2 was successfully synthesized, and endowed the electrode with outstanding electrochemical performance. For the three-electrode testing system, honeycomb-like Ni(OH)2 exhibited a very high specific capacitance (1865 F·g-1 at 1 A·g-1, 1550 F·g-1 at 5 mV·s-1). Moreover, it also presented an excellent rate capability and cycling stability, due to 59.46 % of the initial value (1 A·g-1) being retained at 10 A·g-1, and 172% of initial value (first circle at 50 mV·s-1) being retained after 20,000 cycles. With respect to the assembled hybrid supercapacitor, honeycomb-like Ni(OH)2 also displayed superior electrochemical performance, with a high energy density (83.9 Wh·kg-1 at a power density of 374.8 W·kg-1). The outstanding electrochemical performance of Ni(OH)2 should be attributed to its unique honeycomb-like structure, with a very high specific surface area, which greatly accelerates the transformation and diffusion of active ions.