Spectroscopic and molecular electronic property investigation of 2-phenylpyrimidine-4, 6-diamine via 1H NMR, UV–vis, FT-Raman, FT-IR, and DFT approach

Adsorption and sensor performance of transition metal-decorated zirconium-doped silicon carbide nanotubes for NO2 gas application: a computational insight

Owing to the fact that the detection limit of already existing sensor-devices is below 100% efficiency, the use of 3D nanomaterials as detectors and sensors for various pollutants has attracted interest from researchers in this field. Therefore, the sensing potentials of bare and the impact of Cu-group transition metal (Cu, Ag, Au)-functionalized silicon carbide nanotube (SiCNT) nanostructured surfaces were examined towards the efficient detection of NO2 gas in the atmosphere. All computational calculations were carried out using the density functional theory (DFT) electronic structure method at the B3LYP-D3(BJ)/def2svp level of theory. The mechanistic results showed that the Cu-functionalized silicon carbide nanotube surface possesses the greatest adsorption energies of -3.780 and -2.925 eV, corresponding to the adsorption at the o-site and n-site, respectively. Furthermore, the lowest energy gap of 2.095 eV for the Cu-functionalized surface indicates that adsorption at the o-site is the most stable. The stability of both adsorption sites on the Cu-functionalized surface was attributed to the small ellipticity (ε) values obtained. Sensor mechanisms confirmed that among the surfaces, the Cu-functionalized surface exhibited the best sensing properties, including sensitivity, conductivity, and enhanced adsorption capacity. Hence, the Cu-functionalized SiCNT can be considered a promising choice as a gas sensor material.

Exploring the Interaction Between the Newly Designed Antitumor Zn(II) Complex and CT-DNA/BSA: Spectroscopic Methods, DFT Computational Analysis, and Docking Simulation

A new zinc(II) complex formulated as [Zn(pipr-ac)2], where pipr-ac stands for piperidineacetate, was synthesized and structurally identified with the help of experimental and DFT methods. Frontier molecular orbital (FMO) analysis demonstrated that the new complex has higher biological activity compared to the free ligand. Molecular electrostatic potential (MEP) showed the nitrogen atoms and oxygen of carbonyl groups are the active sites of Zn(II) compound. Also, natural bond orbital (NBO) analysis confirmed the charge transfer from the ligating atoms to the metal ion and formation of four coordinated Zn(II) complex. MTT assay illustrated a noticeable cytotoxic activity of the new zinc(II) complex compared to cisplatin on K562 cell line. The CT-DNA and serum albumin (SA) binding of the Zn(II) complex were explored individually. In this regard, UV-Vis spectroscopy and florescence titration revealed the occurrences of fluorescence quenching of CT-DNA/SA by metal compound via static mechanism and creation of hydrogen bonds and van der Waals interactions between them. The binding was further confirmed by viscosity measurement and gel electrophoresis assay for CT-DNA and circular dichroism spectroscopy for SA. Moreover, molecular docking simulation demonstrated that the new compound binds mainly through hydrogen bonds to the groove of DNA and hydrogen bonds and van der Waals interactions to site I of SA.

Interaction of 5-Fluorouracil on the Surfaces of Pristine and Functionalized Ca12O12 Nanocages: An Intuition from DFT

The utilization of nanostructured materials for several biomedical applications has tremendously increased over the last few decades owing to their nanosizes, porosity, large surface area, sensitivity, and efficiency as drug delivery systems. Thus, the incorporation of functionalized and pristine nanostructures for cancer therapy offers substantial prospects to curb the persistent problems of ineffective drug administration and delivery to target sites. The potential of pristine (Ca₁₂O₁₂) and formyl (-CHO)- and amino (-NH₂)-functionalized (Ca₁₂O₁₂-CHO and Ca₁₂O₁₂-NH₂) derivatives as efficient nanocarriers for 5-fluorouracil (5FU) was studied at the B3LYP-GD3(BJ)/6-311++G(d,p) theoretical level in two electronic media (gas and solvent). To effectively account for all adsorption interactions of the drug on the investigated surfaces, electronic studies as well as topological analysis based on the quantum theory of atoms in molecules (QTAIM) and noncovalent interactions were exhaustively utilized. Interestingly, the obtained results divulged that the 5FU drug interacted favorably with both Ca₁₂O₁₂ and its functionalized derivatives. The adsorption energies of pristine and functionalized nanostructures were calculated to be -133.4, -96.9, and -175.6 kcal/mol, respectively, for Ca₁₂O₁₂, Ca₁₂O₁₂-CHO, and Ca₁₂O₁₂-NH2. Also, both topological analysis and NBO stabilization analysis revealed the presence of interactions among O₃-H₃₂, O₂₇-C₂₄, O₁₀-C₂₇, and N₂₄-H₃₂ atoms of the drug and the surface. However, 5FU@Ca₁₂O₁₂-CHO molecules portrayed the least adsorption energy due to considerable destabilization of the molecular complex as revealed by the computed deformation energy. Therefore, 5FU@Ca₁₂O₁₂ and 5FU@Ca₁₂O₁₂-NH₂ acted as better nanovehicles for 5FU.

Thyroid hormone transporters binding affinity of methoxypoly chlorinated biphenyls: Insights from molecular simulations and fluorescence competitive binding experiment

Triiodothyronine (T3) and thyroxine (T4) are essential for regulating cell metabolic rate and promoting the development and differentiation of brain tissue, especially in fetuses and newborns. In particular, it has been proved that MeO-PCBs have high binding to thyroid hormone transporters and can competitively bind to thyroid carrier proteins, thus destroying the transport of the thyroid hormone. Fluorescence competition binding experiments and docking results showed that the binding affinity decreased with the increase in number of chlorine atoms of MeO-PCBs. The interaction mechanism of MeO-PCBs with thyroid transporter (TTR) and thyroid binding globulin (TBG) was compared by computational simulation and the binding free energies were calculated by the molecular mechanics/Poisson-Boltzmann surface area (MM/PBSA) method. Electrostatic potential analysis, Hirshfeld surface analysis and electron density difference maps confirmed the existence of electrostatic interactions. Secondly, noncovalent interaction (NCI) analysis further indicated that the main driving force for the combination of MeO-PCBs to TTR and TBG were electrostatic interaction and van der Waals interaction. The conformational changes of the protein after binding were studied by a molecular dynamic simulation.

High-performance non-fullerene acceptor-analogues designed from dithienothiophen [3,2-b]-pyrrolobenzothiadiazole (TPBT) donor materials

CONTEXT

Density functional theory (DFT) method was employed to investigate the electronic structure properties, excited state dynamics, charge transfer, and photovoltaic potential of benzo [1,2,5] thiadiazole fused to 3,7-dimethyl-3a,6,7,7b-tetrahydro-5H-thieno[2',3':4,5]thieno[3,2-b]pyrrole to form 3,9,12,13-tetramethyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4,5]pyrrolo[3.2-g]thieno[2',3':4,5]thieno[3,2-b]indole as the acceptor (A), bridge with thiophene as π-spacer to the donor moieties (D) which are 2,3-dihydrobenzo [b]thiophene-6-carboxylic acid (M4) and functionalized R, M1, M2, M3, and M5 to give a D-π-A-π-D. Here is the reverse combination for our molecules: the A-π-D-π-A type of chromophore configuration. It is also observed that tuning the dono-bridge configuration significantly increases the ease of charge transfer as the energy gap decreases in the order of 1.29 eV in M4 < 1.59 eV in M3 < 1.67 eV < 1.99 in M2 and 2.06 eV. The reorganization energy (RE) of M3 (0.0031) and M5 (0.0031) indicates an increase in the order of M3 > M5 > R > M2 > M4 > M1. The HOMO-LUMO indicates that the reactivity decreased, while the stability increased for the reference R at 0.990 eV, compared to the designed molecules M1-M5, with M1 being the least stable at 0.970 eV, while M4 exhibited the highest stability at 1.550 eV. The stability of the designed molecule decreased in the order of M4:1.550 > M3:1.257 > M5:1.197 > M2:1.010 > M1:0.970. Therefore, all results point to the electron-deficient core as an effective end-capped electron acceptor in M1-M5 compounds. As the ideal pair for successfully optimizing optoelectronic properties by reducing the HOMO-LUMO energy levels, reorganization energy, and binding energy and enhancing the absorption maximum and open-circuit voltage values in these designed molecules.

METHODS

DFT and TDDFT calculations were performed with Gaussian 16 program. The modelled compounds were optimized fully using the CAM-B3LYP, WB97XD, B3LYP, and MPW1PW91 functionals with the 6-31 G (d,p) basis set. The graphs for the density of states were plotted using the PyMOlyze software. Other molecular properties like the transition density matrix (TDM) and electron density difference maps (EDD) were rendered via the Multiwfn software.

Probing the Reactions of Thiourea (CH4N2S) with Metals (X = Au, Hf, Hg, Ir, Os, W, Pt, and Re) Anchored on Fullerene Surfaces (C59X)

Upon various investigations conducted in search for a nanosensor material with the best sensing performance, the need to explore these materials cannot be overemphasized as materials associated with best sensing attributes are of vast interest to researchers. Hence, there is a need to investigate the adsorption performances of various metal-doped fullerene surfaces: C₅₉Au, C₅₉Hf, C₅₉Hg, C₅₉Ir, C₅₉Os, C₅₉Pt, C₅₉Re, and C₅₉W on thiourea [SC(NH₂)₂] molecule using first-principles density functional theory computation. Comparative adsorption study has been carried out on various adsorption models of four functionals, M06-2X, M062X-D3, PBE0-D3, and ωB97XD, and two double-hybrid (DH) functionals, DSDPBEP86 and PBE0DH, as reference at Gen/def2svp/LanL2DZ. The visual study of weak interactions such as quantum theory of atoms in molecule analysis and noncovalent interaction analysis has been invoked to ascertain these results, and hence we arrived at a conclusive scientific report. In all cases, the weak adsorption observed is best described as physisorption phenomena, and CH₄N₂S@C₅₉Pt complex exhibits better sensing attributes than its studied counterparts in the interactions between thiourea molecule and transition metal-doped fullerene surfaces. Also, in the comparative adsorption study, DH density functionals show better performance in estimating the adsorption energies due to their reduced mean absolute deviation (MAD) and root-mean-square deviation (RMSD) values of (MAD = 1.0305, RMSD = 1.6277) and (MAD = 0.9965, RMSD = 1.6101) in DSDPBEP86 and PBE0DH, respectively.

Detection of Carbon, Sulfur, and Nitrogen Dioxide Pollutants with a 2D Ca12O12 Nanostructured Material

In recent times, nanomaterials have been applied for the detection and sensing of toxic gases in the environment owing to their large surface-to-volume ratio and efficiency. CO₂ is a toxic gas that is associated with causing global warming, while SO₂ and NO₂ are also characterized as nonbenign gases in the sense that when inhaled, they increase the rate of respiratory infections. Therefore, there is an explicit reason to develop efficient nanosensors for monitoring and sensing of these gases in the environment. Herein, we performed quantum chemical simulation on a Ca₁₂O₁₂ nanocage as an efficient nanosensor for sensing and monitoring of these gases (CO₂, SO₂, NO₂) by employing high-level density functional theory modeling at the B3LYP-GD3(BJ)/6-311+G(d,p) level of theory. The results obtained from our studies revealed that the adsorption of CO₂ and SO₂ on the Ca₁₂O₁₂ nanocage with adsorption energies of -2.01 and -5.85 eV, respectively, is chemisorption in nature, while that of NO₂ possessing an adsorption energy of -0.69 eV is related to physisorption. Moreover, frontier molecular orbital (FMO), global reactivity descriptors, and noncovalent interaction (NCI) analysis revealed that the adsorption of CO₂ and SO₂ on the Ca₁₂O₁₂ nanocage is stable adsorption, while that of NO₂ is unstable adsorption. Thus, we can infer that the Ca₁₂O₁₂ nanocage is more efficient as a nanosensor in sensing CO₂ and SO₂ gases than in sensing NO₂ gas.