TiO2 genotoxicity: An update of the results published over the last six years

Subchronic Inhalation of TiO2 Nanoparticles Leads to Deposition in the Lung and Alterations in Erythrocyte Morphology in Mice

TiO2 nanoparticles (NPs) are extensively used in various applications, highlighting the importance of ongoing research into their effects. This work belongs among rare whole-body inhalation studies investigating the effects of TiO2 NPs on mice. Unlike previous studies, the concentration of TiO2 NPs in the inhalation chamber (130.8 μg/m3) was significantly lower. This 11-week study on mice confirmed in vivo the presence of TiO2 NPs in lung macrophages and type II pneumocytes including their intracellular localization by using the electron microscopy and the state-of-the-art methods detecting NPs' chemical identity/crystal structure, such as the energy-dispersed X-ray spectroscopy (EDX), cathodoluminescence (CL), and detailed diffraction pattern analysis using powder nanobeam diffraction (PNBD). For the first time in inhalation study in vivo, the alterations in erythrocyte morphology with evidence of echinocytes and stomatocytes, accompanied by iron accumulation in spleen, liver, and kidney, are reported following NP's exposure. Together with the histopathological evidence of hyperaemia in the spleen and kidney, and haemosiderin presence in the spleen, the finding of NPs containing iron might suggest the increased decomposition of damaged erythrocytes. The detection of TiO2 NPs on erythrocytes through CL analysis confirmed their potential systemic availability. On the contrary, TiO2 NPs were not confirmed in other organs (spleen, liver, and kidney); Ti was detected only in the kidney near the detection limit.

Titanium Dioxide Nanoparticles-Induced Genotoxic Effects in Mosquito Culex quinquefaciatus

Titanium dioxide (TiO2) nanoparticles are being extensively used in a wide range of industrial applications for producing a variety of different consumer products, including medicines and even food items. The consumption of these products is increasing at an alarming rate, and this results in the release of these nanoparticles in the environment, causing a threat to organisms thriving in aquatic as well as terrestrial ecosystems. That is why screening such materials for their genotoxic effects, if any, becomes essential. A toxicity assay was performed to determine the LD20 of these nanoparticles for the mosquito Culex quinquefaciatus by Probit analysis. Early fourth instar larvae were exposed to the selected dose of 50 µg/mL, which is Collapse

Key Words

• Culex quinquefaciatus
• LD20
• chromosomal aberrations
• genotoxic effect
• mitotic index
• titanium dioxide nanoparticles

Collapse

MESH Headings Collapse

Grants

• RSP2025R356 King Saud University

Collapse

Affiliation(s)

Aastha Saini Department of Zoology, Akal College of Basic Sciences, Eternal University, Baru Sahib, Sirmaur 173101, Himachal Pradesh, India;
Kanwaljit Kaur Ahluwalia Department of Zoology, Akal College of Basic Sciences, Eternal University, Baru Sahib, Sirmaur 173101, Himachal Pradesh, India;
Amrik Singh Ahluwalia Department of Botany, Akal College of Basic Sciences, Eternal University, Baru Sahib, Sirmaur 173101, Himachal Pradesh, India;
Neelam Thakur Department of Zoology, Akal College of Basic Sciences, Eternal University, Baru Sahib, Sirmaur 173101, Himachal Pradesh, India;
Puneet Negi Department of Physics, Akal College of Basic Sciences, Eternal University, Baru Sahib, Sirmaur 173101, Himachal Pradesh, India;
Abeer Hashem Botany and Microbiology Department, College of Science, King Saud University, P.O. Box. 2460, Riyadh 11451, Saudi Arabia;
Khalid F. Almutairi Plant Production Department, College of Food and Agricultural Sciences, King Saud University, P.O. Box 2460, Riyadh 11451, Saudi Arabia; (K.F.A.); (E.F.A.)
Elsayed Fathi Abd_Allah Plant Production Department, College of Food and Agricultural Sciences, King Saud University, P.O. Box 2460, Riyadh 11451, Saudi Arabia; (K.F.A.); (E.F.A.)

Collapse

Using particle dimensionality-based modeling to estimate lung carcinogenicity of 3D printer emissions

The use of 3D printing technologies by industry and consumers is expanding. However, the approaches to assess the risk of lung carcinogenesis from the emissions of 3D printers have not yet been developed. The objective of the study was to demonstrate a methodology for modeling lung cancer risk related to specific exposure levels as derived from an experimental study of 3D printer emissions for various types of filaments (ABS, PLA, and PETG). The emissions of 15 filaments were assessed at varying extrusion temperatures for a total of 23 conditions in a Class 1,000 cleanroom following procedures described by ANSI/CAN/UL 2904. Three approaches were utilized for cancer risk estimation: (a) calculation based on PM2.5 and PM10 concentrations, (b) a proximity assessment based on the pulmonary deposition fraction, and (c) modeling based on the mass-weighted aerodynamic diameter of particles. The combined distribution of emitted particles had the mass median aerodynamic diameter (MMAD) of 0.35 μm, GSD 2.25. The average concentration of PM2.5 was 25.21 μg/m3 . The spline-based function of aerodynamic diameter allowed us to reconstruct the carcinogenic potential of seven types of fine and ultrafine particles (crystalline silica, fine TiO2 , ultrafine TiO2 , ambient PM2.5 and PM10, diesel particulates, and carbon nanotubes) with a correlation of 0.999, P < 0.00001. The central tendency estimation of lung cancer risk for 3D printer emissions was found at the level of 14.74 cases per 10,000 workers in a typical exposure scenario (average cumulative exposure of 0.3 mg/m3 - years), with the lowest risks for PLA filaments, and the highest for PETG type.

Evaluation of Systemic Genotoxic/Oxidative and Proinflammatory Effects in Workers of a Titanium Dioxide Production Plant

This study is aimed at evaluating whether the occupational exposure to TiO₂ during the industrial production process is able to induce genotoxic, oxidative, and inflammatory effects on blood, biomonitoring the same workers that showed micronucleus induction in the exfoliated buccal cells, as previous published. The final aim was to find sensitive and suitable biomarkers to evaluate potential early toxicity of occupational exposure to TiO₂. On the same 40 workers involved in the manufacture of TiO₂ pigment, 5 office workers, and 18 controls previously studied, we used formamidopyrimidine glycosylase- (Fpg-) comet assay on lymphocytes to evaluate genotoxic/oxidative effects and detected cytokine (IL-6, IL-8, and TNFα) release by ELISA to evaluate proinflammation. Moreover, we studied the possible influence of single nucleotide polymorphisms of XRCC1 and hOGG1 DNA repair genes and of GST metabolism-related genes (GSTT1 and GSTM1) on the evaluated effects. We did not find statistically significant differences in the mean values of the analysed Fpg-comet assay parameters; only the percentage of DNA damaged cells appearing in the test as comets (% comets) resulted higher in the exposed workers compared to controls. Also, the data analysed taking into account the specific task (bagging, industrial cleaning, mobile operations, maintaining, and production) showed differences only for % comets which resulted higher in industrial cleaners compared to controls. We found variations of IL-6 and IL-8 levels in the exposed workers with concentrations that were lower for IL-6 and higher for IL-8 compared to the control group. XRCC1, hOGG1, and GSTT1 polymorphisms did not influence neither comet parameters nor cytokine release. These findings demonstrate that TiO₂ production process is able to induce slight proinflammatory effects in terms of IL-8 increased release but not significant genotoxic/oxidative effects on lymphocytes, which do not seem to be a target of TiO₂, prevalently inhalable particles, generated in the studied production site.

Immediate and Sustained Effects of Cobalt and Zinc-Containing Pigments on Macrophages

Pigments are among the oldest nanoparticulate products known to mankind, and their use in tattoos is also very old. Nowadays, 25% of American people aged 18 to 50 are tattooed, which poses the question of the delayed effects of tattoos. In this article, we investigated three cobalt [Pigment Violet 14 (purple color)] or cobalt alloy pigments [Pigment Blue 28 (blue color), Pigment Green 14 (green color)], and one zinc pigment [Pigment White 4 (white color)] which constitute a wide range of colors found in tattoos. These pigments contain microparticles and a significant proportion of submicroparticles or nanoparticles (in either aggregate or free form). Because of the key role of macrophages in the scavenging of particulate materials, we tested the effects of cobalt- and zinc-based pigments on the J774A.1 macrophage cell line. In order to detect delayed effects, we compared two exposure schemes: acute exposure for 24 hours and an exposure for 24 hours followed by a 3-day post-exposure recovery period. The conjunction of these two schemes allowed for the investigation of the delayed or sustained effects of pigments. All pigments induced functional effects on macrophages, most of which were pigment-dependent. For example, Pigment Green 19, Pigment Blue 28, and Pigment White 4 showed a delayed alteration of the phagocytic capacity of cells. Moreover, all the pigments tested induced a slight but significant increase in tumor necrosis factor secretion. This effect, however, was transitory. Conversely, only Pigment Blue 28 induced both a short and sustained increase in interleukin 6 secretion. Results showed that in response to bacterial stimuli (LPS), the secretion of tumor necrosis factor and interleukin 6 declined after exposure to pigments followed by a recovery period. For chemoattractant cytokines (MCP-1 or MIP-1α), delayed effects were observed with a secretion decreased in presence of Pigment Blue 28 and Pigment violet 14, both with or without LPS stimuli. The pigments also induced persisting changes in some important macrophage membrane markers such as CD11b, an integrin contributing to cell adhesion and immunological tolerance. In conclusion, the pigments induced functional disorders in macrophages, which, in some cases, persist long after exposure, even at non-toxic doses.

The High-Throughput In Vitro CometChip Assay for the Analysis of Metal Oxide Nanomaterial Induced DNA Damage

Metal oxide nanomaterials (MONMs) are among the most highly utilized classes of nanomaterials worldwide, though their potential to induce DNA damage in living organisms is known. High-throughput in vitro assays have the potential to greatly expedite analysis and understanding of MONM induced toxicity while minimizing the overall use of animals. In this study, the high-throughput CometChip assay was used to assess the in vitro genotoxic potential of pristine copper oxide (CuO), zinc oxide (ZnO), and titanium dioxide (TiO2) MONMs and microparticles (MPs), as well as five coated/surface-modified TiO2 NPs and zinc (II) chloride (ZnCl2) and copper (II) chloride (CuCl2) after 2–4 h of exposure. The CuO NPs, ZnO NPs and MPs, and ZnCl2 exposures induced dose- and time-dependent increases in DNA damage at both timepoints. TiO2 NPs surface coated with silica or silica–alumina and one pristine TiO2 NP of rutile crystal structure also induced subtle dose-dependent DNA damage. Concentration modelling at both post-exposure timepoints highlighted the contribution of the dissolved species to the response of ZnO, and the role of the nanoparticle fraction for CuO mediated genotoxicity, showing the differential impact that particle and dissolved fractions can have on genotoxicity induced by MONMs. The results imply that solubility alone may be insufficient to explain the biological behaviour of MONMs.

Gelatin Loaded Titanium Dioxide and Silver Oxide Nanoparticles: Implication for Skin Tissue Regeneration

Treatment of burn wounds has many requirements to ensure wound closure with healthy tissue, increased vascularization, guarantee edema resolution, and control bacterial infection. We propose that titanium oxide (TiO₂) nanoparticles (NPs) will be more efficient than silver dioxide (Ag₂O) in the treatment of burn wounds. Herein, gelatin loaded NPs (GLT-NPs) were evaluated for their efficacy to regenerate second-degree burn wound in rabbit skin. TEM results revealed that the average particle sizes were ⁓ 7.5 and 17 nm for Ag₂O and TiO₂ NPs, respectively. The results of the in vivo application of GLT-NPs on burn wound in the rabbit revealed that both Ag₂O and TiO₂ NPs were efficient than the control none treated (CTRL) and GLT group. In terms of the healing rate, the GLT-TiO₂ did not show any significant difference than GLT-Ag₂O (99.57% vs. 99.85%, p = 0.2). Meanwhile, the healing rate was significantly higher in both NPs' treated groups than CTRL (94.16%, p < 0.01) and GLT group (95.07%, p < 0.05). Also, the histological analysis using H&E staining showed re-epithelization, less edema, and enhanced vascularization in both GLT-NPs than CTRL and GLT groups. Furthermore, immunohistochemical analysis of TGF-β1 and α-SMA revealed significantly a higher expression in both GLT-NPs groups than CTRL and GLT groups at weeks 1 and 2 (p < 0.05). Interestingly, TGF-β1 and α-SMA were substantially higher in GLT- TiO₂ than GLT-Ag₂O at weeks 1 and 2 (p < 0.05), but the expression was not significant at week 3. In conclusion, GLT-NPs showed higher regenerative capacity and enhanced the healing quality after burn wound compared to CTRL and GLT. Graphical abstract.

Influence of Titanium Dioxide Nanoparticles on Human Health and the Environment

Nanotechnology has enabled tremendous breakthroughs in the development of materials and, nowadays, is well established in various economic fields. Among the various nanomaterials, TiO₂ nanoparticles (NPs) occupy a special position, as they are distinguished by their high availability, high photocatalytic activity, and favorable price, which make them useful in the production of paints, plastics, paper, cosmetics, food, furniture, etc. In textiles, TiO₂ NPs are widely used in chemical finishing processes to impart various protective functional properties to the fibers for the production of high-tech textile products with high added value. Such applications contribute to the overall consumption of TiO₂ NPs, which gives rise to reasonable considerations about the impact of TiO₂ NPs on human health and the environment, and debates regarding whether the extent of the benefits gained from the use of TiO₂ NPs justifies the potential risks. In this study, different TiO₂ NPs exposure modes are discussed, and their toxicity mechanisms—evaluated in various in vitro and in vivo studies—are briefly described, considering the molecular interactions with human health and the environment. In addition, in the conclusion of this study, the toxicity and biocompatibility of TiO₂ NPs are discussed, along with relevant risk management strategies.

Research progress on the carcinogenicity of metal nanomaterials

With the rapid development of nanotechnology, new nanomaterials with enormous potentials continue to emerge, especially metal nanomaterials. Metal nanomaterials possess the characteristics of metals and nanomaterials, so they are widely used in many fields. But at the same time, whether the use or release of metal nan4omaterials into the environment is toxic to human beings and animals has now attained widespread attention at home and abroad. Currently, it is an indisputable fact that cancer ranks among the top causes of death among residents worldwide. The properties of causing DNA damage and mutations possessed by these metal nanomaterials make them unpredictable influences in the body, subsequently leading to genotoxicity and carcinogenicity. Due to the increasing evidence of their roles in carcinogenicity, this article reviews the toxicological and carcinogenic effects of metal nanomaterials, including nano-metal elements (nickel nanoparticles, silver nanoparticles, and cobalt nanoparticles) and nano-metal oxides (titanium dioxide nanoparticles, silica nanoparticles, zinc oxide nanoparticles, and alumina nanoparticles). This article provides a reference for the researchers and policymakers to use metal nanomaterials rationally in modern industries and biomedicine.

Titanium Dioxide Nanoparticles in Food and Personal Care Products-What Do We Know about Their Safety?

Titanium dioxide (TiO2) is a material of diverse applications commonly used as a food additive or cosmetic ingredient. Its prevalence in products of everyday use, especially in nanosize, raises concerns about safety. Current findings on the safety of titanium dioxide nanoparticles (TiO2 NPs) used as a food additive or a sunscreen compound are reviewed and systematized in this publication. Although some studies state that TiO2 NPs are not harmful to humans through ingestion or via dermal exposure, there is a considerable number of data that demonstrated their toxic effects in animal models. The final agreement on the safety of this nanomaterial has not yet been reached among researchers. There is also a lack of official, standardized guidelines for thorough characterization of TiO2 NPs in food and cosmetic products, provided by international authorities. Recent advances in the application of 'green-synthesized' TiO2 NPs, as well as comparative studies of the properties of 'biogenic' and 'traditional' nanoparticles, are presented. To conclude, perspectives and directions for further studies on the toxicity of TiO2 NPs are proposed.