Improving detection specificity of iron oxide nanoparticles (IONPs) using the SWIFT sequence with long T(2) suppression

Short-T2 MRI: Principles and recent advances

Among current modalities of biomedical and diagnostic imaging, MRI stands out by virtue of its versatile contrast obtained without ionizing radiation. However, in various cases, e.g., water protons in tissues such as bone, tendon, and lung, MRI performance is limited by the rapid decay of resonance signals associated with short transverse relaxation times T₂ or T₂*. Efforts to address this shortcoming have led to a variety of specialized short-T₂ techniques. Recent progress in this field expands the choice of methods and prompts fresh considerations with regard to instrumentation, data acquisition, and signal processing. In this review, the current status of short-T₂ MRI is surveyed. In an attempt to structure the growing range of techniques, the presentation highlights overarching concepts and basic methodological options. The most frequently used approaches are described in detail, including acquisition strategies, image reconstruction, hardware requirements, means of introducing contrast, sources of artifacts, limitations, and applications.

Ultrashort Echo Time Quantitative Susceptibility Mapping (UTE-QSM) of Highly Concentrated Magnetic Nanoparticles: A Comparison Study about Different Sampling Strategies

The ability to accurately and non-invasively quantify highly concentrated magnetic nanoparticles (MNPs) is desirable for many emerging applications. Ultrashort echo time quantitative susceptibility mapping (UTE-QSM) has demonstrated the capability to detect high iron concentrations. In this study, we aimed to investigate the effect of different sampling trajectories on the accuracy of quantification based on MNPs acquired through UTE-QSM. A phantom with six different MNP concentrations was prepared for UTE-QSM study with different UTE sampling trajectories, including radial acquisition, continuous single point imaging (CSPI), and Cones with four different gradient stretching factors of 1.0, 1.2, 1.4, and 1.6. No significant differences were found in QSM values derived from the different UTE sampling strategies, suggesting that the UTE-QSM technique could be accelerated with extended Cones sampling.

Emerging blood–brain-barrier-crossing nanotechnology for brain cancer theranostics

The advancements, perspectives, and challenges in blood–brain-barrier (BBB)-crossing nanotechnology for effective brain tumor delivery and highly efficient brain cancer theranostics.

Simultaneous quantitative susceptibility mapping (QSM) and R2* for high iron concentration quantification with 3D ultrashort echo time sequences: An echo dependence study

PURPOSE

To evaluate the echo dependence of 3D ultrashort echo time (TE) quantitative susceptibility mapping (3D UTE-QSM) and effective transverse relaxation rate ( R2*) measurement in the setting of high concentrations of iron oxide nanoparticles.

METHODS

A phantom study with iron concentrations ranging from 2 to 22 mM was performed using a 3D UTE Cones sequence. Simultaneous QSM processing with morphology-enabled dipole inversion (MEDI) and R2* single exponential fitting was conducted offline with the acquired 3D UTE data. The dependence of UTE-QSM and R2* on echo spacing (ΔTE) and first TE (TE₁ ) was investigated.

RESULTS

A linear relationship was observed between UTE-QSM measurement and iron concentration up to 22 mM only, with the minimal TE₁ of 0.032 ms and ΔTE of less than 0.1 ms. A linear relationship was observed between R2* and iron concentration up to 22 mM only when TE₁ was less than 0.132 ms and ΔTE was less than 1.2 ms. UTE-QSM with MEDI processing showed strong dependence on ΔTE and TE₁ , especially at high iron concentrations.

CONCLUSION

UTE-QSM is more sensitive than R2* measurement to TE selection. Both an ultrashort TE₁ and a small ΔTE are needed to achieve accurate QSM for high iron concentrations. Magn Reson Med 79:2315-2322, 2018. © 2018 International Society for Magnetic Resonance in Medicine.

Positive contrast from cells labeled with iron oxide nanoparticles: Quantitation of imaging data

PURPOSE

Conventional T₂ -weighted MRI produces a hypointense signal from iron-labeled cells, which renders quantification unfeasible. We tested a SWeep Imaging with Fourier Transformation (SWIFT) MRI pulse sequence to generate a quantifiable hyperintense signal from iron-labeled cells.

METHODS

Mesenchymal stem cells (MSCs) were labeled with different concentrations of iron oxide particles and examined for cell viability, proliferation, and differentiation. The SWIFT sequence was optimized to detect and quantify the amount of iron in the muscle tissue after injection of iron oxide solution and iron-labeled MSCs.

RESULTS

The incubation of MSCs with iron oxide and low concentration of poly-L-lysine mixture resulted in an internalization of up to 22 pg of iron per cell with no adverse effect on MSCs. Phantom experiments showed a dependence of SWIFT signal intensity on the excitation flip angle. The hyperintense signal from iron-labeled cells or solutions was detected, and an amount of the iron oxide in the tissue was quantified with the variable flip angle method.

CONCLUSIONS

The SWIFT sequence can produce a quantifiable hyperintense MRI signal from iron-labeled cells. The graft of 18 x 10⁶ cells was detectable for 19 days after injection and the amount of iron was quantifiable. The proposed protocol simplifies the detection and provides a means to quantify cell numbers. Magn Reson Med 78:1900-1910, 2017. © 2017 International Society for Magnetic Resonance in Medicine.

Magnetic nanoparticles for precision oncology: theranostic magnetic iron oxide nanoparticles for image-guided and targeted cancer therapy

Recent advances in the development of magnetic nanoparticles (MNPs) have shown promise in the development of new personalized therapeutic approaches for clinical management of cancer patients. The unique physicochemical properties of MNPs endow them with novel multifunctional capabilities for imaging, drug delivery and therapy, which are referred to as theranostics. To facilitate the translation of those theranostic MNPs into clinical applications, extensive efforts have been made on designing and improving biocompatibility, stability, safety, drug-loading ability, targeted delivery, imaging signal and thermal- or photodynamic response. In this review, we provide an overview of the physicochemical properties, toxicity and theranostic applications of MNPs with a focus on magnetic iron oxide nanoparticles.

Imaging and quantification of iron-oxide nanoparticles (IONP) using MP-RAGE and UTE based sequences

PURPOSE

To investigate two-dimensional (2D) and three-dimensional (3D) ultrashort echo time (UTE) and 3D magnetization-prepared rapid gradient-echo (MP-RAGE) sequences for the imaging of iron-oxide nanoparticles (IONP).

METHODS

The phantoms were composed of tubes filled with different IONP concentrations ranging from 2 to 45 mM. The tubes were fixed in an agarose gel phantom (0.9% by weight). Morphological imaging was performed with 3D MP-RAGE, 2D UTE, 2D adiabatic inversion recovery-prepared UTE (2D IR-UTE), 3D UTE with Cones trajectory (3D Cones), and 3D IR-Cones sequences. Quantitative assessment of IONP concentration was performed using R2*(1/T2*) and R₁ (1/T₁ ) measurements using a 3 Tesla (T) scanner.

RESULTS

The 3D MP-RAGE sequence provides high-contrast images of IONP with concentration up to 7.5 mM. Higher IONP concentration up to 37.5 mM can be detected with the UTE sequences, with the highest IONP contrast provided by the 3D IR-Cones sequence. A linear relationship was observed between R2* and IONP concentration up to ∼45 mM, and between R₁ and IONP concentration up to ∼30 mM.

CONCLUSION

The clinical 3D MP-RAGE sequence can be used to assess lower IONP concentration up to 7.5 mM. The UTE sequences can be used to assess higher IONP concentration up to 45 mM. Magn Reson Med 78:226-232, 2017. © 2016 International Society for Magnetic Resonance in Medicine.

Multifunctional Fe2O3@PPy-PEG nanocomposite for combination cancer therapy with MR imaging

In recent years, magnetic hyperthermia nanoparticles have drawn great attention for cancer therapy because they have no limitation of tissue penetration during the therapy process. In this study, cubic nanoporous Fe2O3 nanoparticles derived from cubic Prussian blue nanoparticles were used as magnetic cores to generate heat by alternating the current magnetic field (AMF) for killing cancer cells. In addition, polypyrrole (PPy) was coated on the surfaces of the cubic Fe2O3 nanoparticles to load doxorubicin hydrochloride (DOX). The PEG component was then physically adsorbed onto the surfaces of the nanoparticles, resulting in a Fe2O3@PPy-DOX-PEG nanocomposite. The nanocomposite was triggered by acid stimulus and AMF to release DOX, resulting in a remarkable combination therapeutic effect via chemotherapy and magnetic hyperthermia. Furthermore, the nanocomposite could realize magnetic resonance imaging (MRI) due to the magnetic core structure. The study provides an alternative for the development of new nanocomposites for combination cancer therapy with MR imaging in vivo.

Continuous MR bone density measurement using water- and fat-suppressed projection imaging (WASPI) for PET attenuation correction in PET-MR

Due to the lack of signal from solid bone in normal MR sequences for the purpose of MR-based attenuation correction, investigators have proposed using the ultrashort echo time (UTE) pulse sequence, which yields signal from bone. However, the UTE-based segmentation approach might not fully capture the intra- and inter-subject bone density variation, which will inevitably lead to bias in reconstructed PET images. In this work, we investigated using the water- and fat-suppressed proton projection imaging (WASPI) sequence to obtain accurate and continuous attenuation for bones. This approach is capable of accounting for intra- and inter-subject bone attenuation variations. Using data acquired from a phantom, we have found that that attenuation correction based on the WASPI sequence is more accurate and precise when compared to either conventional MR attenuation correction or UTE-based segmentation approaches.

ZTE imaging with long-T2 suppression

Three-dimensional radial zero echo time (ZTE) imaging enables efficient direct MRI of tissues with rapid transverse relaxation. Yet, the feature of capturing signals with a wide range of T2 and T2 * values is accompanied by a lack of contrast between the corresponding tissues. In particular, the targeted short-T2 tissues may not be easily identified, and various approaches have been proposed to generate T2 contrast by reducing the long-T2 signal of water and/or fat. The aim of this work was to provide efficient long-T2 suppression for selective direct MRI of short-T2 tissues using the ZTE technique. For magnetization preparation, suppression pulses for water and fat were designed to provide both good T2 selectivity and off-resonance performance. To obtain high efficiency at short TRs, the pulses were applied in a segmented sequence scheme with minimized timing overhead, thus leading to a quasi-steady state of magnetization. The sequence timing was adjusted for optimal tissue contrast in musculoskeletal applications by means of simulations and experiments, incorporating both T2 and T1 of the involved tissues. The developed technique was employed for imaging of a lamb joint sample at 4.7 T. ZTE images were obtained with effective suppression of signals from tissues with long-T2 water, such as muscle or articular spaces, and fat. Hence, primarily short-T2 tissues were visible, such as bone and tendon. The MR image intensity of bone showed strong similarity with bone density imaged with micro-computed tomography.