Nanofibrous modification on ultra-thin poly(e-caprolactone) membrane via electrospinning

Synthetic Extracellular Matrix of Polyvinyl Alcohol Nanofibers for Three-Dimensional Cell Culture

An ideal extracellular matrix (ECM) replacement scaffold in a three-dimensional cell (3D) culture should induce in vivo-like interactions between the ECM and cultured cells. Highly hydrophilic polyvinyl alcohol (PVA) nanofibers disintegrate upon contact with water, resulting in the loss of their fibrous morphology in cell cultures. This can be resolved by using chemical crosslinkers and post-crosslinking. A crosslinked, water-stable, porous, and optically transparent PVA nanofibrous membrane (NM) supports the 3D growth of various cell types. The binding of cells attached to the porous PVA NM is low, resulting in the aggregation of cultured cells in prolonged cultures. PVA NMs containing integrin-binding peptides of fibronectin and laminin were produced to retain the blended peptides as cell-binding substrates. These peptide-blended PVA NMs promote peptide-specific cell adherence and growth. Various cells, including epithelial cells, cultured on these PVA NMs form layers instead of cell aggregates and spheroids, and their growth patterns are similar to those of the cells cultured on an ECM-coated PVA NM. The peptide-retained PVA NMs are non-stimulatory to dendritic cells cultured on the membranes. These peptide-retaining PVA NMs can be used as an ECM replacement matrix by providing in vivo-like interactions between the matrix and cultured cells.

Engineered biomimetic micro/nano-materials for tissue regeneration

The incidence of tissue and organ damage caused by various diseases is increasing worldwide. Tissue engineering is a promising strategy of tackling this problem because of its potential to regenerate or replace damaged tissues and organs. The biochemical and biophysical cues of biomaterials can stimulate and induce biological activities such as cell adhesion, proliferation and differentiation, and ultimately achieve tissue repair and regeneration. Micro/nano materials are a special type of biomaterial that can mimic the microstructure of tissues on a microscopic scale due to its precise construction, further providing scaffolds with specific three-dimensional structures to guide the activities of cells. The study and application of biomimetic micro/nano-materials have greatly promoted the development of tissue engineering. This review aims to provide an overview of the different types of micro/nanomaterials, their preparation methods and their application in tissue regeneration.

Surface modification of polycaprolactone nanofibers through hydrolysis and aminolysis: a comparative study on structural characteristics, mechanical properties, and cellular performance

Hydrolysis and aminolysis are two main commonly used chemical methods for surface modification of hydrophobic tissue engineering scaffolds. The type of chemical reagents along with the concentration and treatment time are main factors that determine the effects of these methods on biomaterials. In the present study, electrospun poly (ℇ-caprolactone) (PCL) nanofibers were modified through hydrolysis and aminolysis. The applied chemical solutions for hydrolysis and aminolysis were NaOH (0.5-2 M) and hexamethylenediamine/isopropanol (HMD/IPA, 0.5-2 M) correspondingly. Three distinct incubation time points were predetermined for the hydrolysis and aminolysis treatments. According to the scanning electron microscopy results, morphological changes emerged only in the higher concentrations of hydrolysis solution (1 M and 2 M) and prolonged treatment duration (6 and 12 h). In contrast, aminolysis treatments induced slight changes in the morphological features of the electrospun PCL nanofibers. Even though surface hydrophilicity of PCL nanofibers was noticeably improved through the both methods, the resultant influence of hydrolysis was comparatively more considerable. As a general trend, both hydrolysis and aminolysis resulted in a moderate decline in the mechanical performance of PCL samples. Energy dispersive spectroscopy analysis indicated elemental changes after the hydrolysis and aminolysis treatments. However, X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy results did not show noticeable alterations subsequent to the treatments. The fibroblast cells were well spread and exhibited a spindle-like shape on the both treated groups. Furthermore, according to the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the surface treatment procedures ameliorated proliferative properties of PCL nanofibers. These findings represented that the modified PCL nanofibrous samples by hydrolysis and aminolysis treatments can be considered as the potentially favorable candidates for tissue engineering applications.

Biodegradable and hydrophobic nanofibrous membranes produced by solution blow spinning for efficient oil/water separation

The development of nanofibrous oil-water separation materials is explosively progressing, but the remarkably low productivity is the main factor hindering their practical application. In this study, biodegradable polybutylene succinate (PBS) nanofibers with excellent productivity (27.0 g/h per nozzle) were successfully fabricated using the solution blow spinning (SBS) process, breaking away from the conventional electrospinning method. The prepared PBS nanofibers exhibited extremely thin fiber diameters (130 nm) with high porosity (97.4%). Without any chemical modification or inorganic/organic hybrid materialization, the PBS nanofibrous membrane showed excellent oil adsorption capacity (minimum: 18.7 g/g and maximum: 38.5 g/g) and separation efficiency; water and oil mixtures (99.4-99.98%) and emulsions (98.1-99.5%) compared to conventional organic polymer-based nanofibers. In terms of disposal after use, this biodegradable nanofibrous membrane was able to return to nature through hydrolysis and biodegradation processes.

Bio-mimicked guided tissue regeneration/guided bone regeneration membranes with hierarchical structured surfaces replicated from teak leaf exhibits enhanced bioactivity

Bio-mimicked GTR/GBR membranes with hierarchical structured surfaces were developed by direct and indirect replication of teak leaf surface. The membranes were fabricated using solvent casting method with customized templates. The surfaces obtained were those with micro-trichomes (MTS) and micro-depression (MDS) that resembled a whorling pattern. Structural details of the fabricated membrane surfaces were studied under stereomicroscope and scanning electron microscopy. Surface roughness, water wetting angle, water uptake, and degradation properties of the membranes were examined. The effects of the micro-patterned hierarchical structure on in vitro bioactivities of human osteoblast-like cells (MG63) and human gingival fibroblast cells HGF1-RT1 were studied. In vivo study carried out on rat skulls to assess the response of surrounding tissues for 4 weeks showed that the bio-mimicked MTS and MDS membrane surfaces enhanced the cell proliferation. The proliferation significantly increased with increasing surface roughness and decreasing contact angle. There was also an evidence of rapid new bone maturation with membranes with MTS. It is thus suggested that the teak leaf mimicked whorling patterned hierarchical structured surface is an important design for enhancing bioactivity.

Strategies to Improve Nanofibrous Scaffolds for Vascular Tissue Engineering

The biofabrication of biomimetic scaffolds for tissue engineering applications is a field in continuous expansion. Of particular interest, nanofibrous scaffolds can mimic the mechanical and structural properties (e.g., collagen fibers) of the natural extracellular matrix (ECM) and have shown high potential in tissue engineering and regenerative medicine. This review presents a general overview on nanofiber fabrication, with a specific focus on the design and application of electrospun nanofibrous scaffolds for vascular regeneration. The main nanofiber fabrication approaches, including self-assembly, thermally induced phase separation, and electrospinning are described. We also address nanofibrous scaffold design, including nanofiber structuring and surface functionalization, to improve scaffolds' properties. Scaffolds for vascular regeneration with enhanced functional properties, given by providing cells with structural or bioactive cues, are discussed. Finally, current in vivo evaluation strategies of these nanofibrous scaffolds are introduced as the final step, before their potential application in clinical vascular tissue engineering can be further assessed.

Insulin production from hiPSC-derived pancreatic cells in a novel wicking matrix bioreactor

Clinical use of pancreatic β islets for regenerative medicine applications requires mass production of functional cells. Current technologies are insufficient for large-scale production in a cost-efficient manner. Here, we evaluate advantages of a porous cellulose scaffold and demonstrate scale-up to a wicking matrix bioreactor as a platform for culture of human endocrine cells. Scaffold modifications were evaluated in a multiwell platform to find the optimum surface condition for pancreatic cell expansion followed by bioreactor culture to confirm suitability. Preceding scale-up, cell morphology, viability, and proliferation of primary pancreatic cells were evaluated. Two optimal surface modifications were chosen and evaluated further for insulin secretion, cell morphology, and viable cell density for human-induced pluripotent stem cell-derived pancreatic cells at different stages of differentiation. Scale-up was accomplished with uncoated, amine-modified cellulose in a miniature bioreactor, and insulin secretion and cell metabolic profiles were determined for 13 days. We achieved 10-fold cell expansion in the bioreactor along with a significant increase in insulin secretion compared with cultures on tissue culture plastic. Our findings define a new method for expansion of pancreatic cells a on wicking matrix cellulose platform to advance cell therapy biomanufacturing for diabetes.

Coating biopolymer nanofibers with carbon nanotubes accelerates tissue healing and bone regeneration through orchestrated cell- and tissue-regulatory responses

Tailoring the surface of biomaterial scaffolds has been a key strategy to modulate the cellular interactions that are helpful for tissue healing process. In particular, nanotopological surfaces have been demonstrated to regulate diverse behaviors of stem cells, such as initial adhesion, spreading and lineage specification. Here, we tailor the surface of biopolymer nanofibers with carbon nanotubes (CNTs) to create a unique bi-modal nanoscale topography (500 nm nanofiber with 25 nm nanotubes) and report the performance in modulating diverse in vivo responses including inflammation, angiogenesis, and bone regeneration. When administered to a rat subcutaneous site, the CNT-coated nanofiber exhibited significantly reduced inflammatory signs (down-regulated pro-inflammatory cytokines and macrophages gathering). Moreover, the CNT-coated nanofibers showed substantially promoted angiogenic responses, with enhanced neoblood vessel formation and angiogenic marker expression. Such stimulated tissue healing events by the CNT interfacing were evidenced in a calvarium bone defect model. The in vivo bone regeneration of the CNT- coated nanofibers was significantly accelerated, with higher bone mineral density and up-regulated osteogenic signs (OPN, OCN, BMP2) of in vivo bone forming cells. The in vitro studies using MSCs could demonstrate accelerated adhesion and osteogenic differentiation and mineralization, supporting the osteo-promoting mechanism behind the in vivo bone forming event. These findings highlight that the CNTs interfacing of biopolymer nanofibers is highly effective in reducing inflammation, promoting angiogenesis, and driving adhesion and osteogenesis of MSCs, which eventually orchestrate to accelerate tissue healing and bone regeneration process. STATEMENT OF SIGNIFICANCE: Here we demonstrate that the interfacing of biopolymer nanofibers with carbon nanotubes (CNTs) could modulate multiple interactions of cells and tissues that are ultimately helpful for the tissue healing and bone regeneration process. The CNT-coated scaffolds significantly reduced the pro-inflammatory signals while stimulating the angiogenic marker expressions. Furthermore, the CNT-coated scaffolds increased the bone matrix production of bone forming cells in vivo as well as accelerated the adhesion and osteogenic differentiation of MSCs in vitro. These collective findings highlight that the CNTs coated on the biopolymer nanofibers allow the creation of a promising platform for nanoscale engineering of biomaterial surface that can favor tissue healing and bone regeneration process, through a series of orchestrated events in anti-inflammation, pro-angiogenesis, and stem cell stimulation.

Induction of Hepatic Regeneration in an Experimental Model Using Hepatocyte-Differentiated Mesenchymal Stem Cells

Mesenchymal stem cell (MSC)-based liver tissue engineering on nanofibrous scaffold holds great promise for cell-based therapy in liver injuries and end-stage liver failure treatments. MSCs were generated from umbilical cord blood. Hepatogenic differentiation was induced on two-dimensional (2D) and three-dimensional (3D) culture system and characterized by morphology, scanning electron microscopy, immunocytochemistry, and gene expression. Albumin and α-1 antitrypsin (AAT) in culture supernatants were measured. Differentiated cells were administered intravenous into a murine model of carbon tetra induced liver cirrhosis. After 12 weeks of injection, liver pathology was examined. The hepatogenic differentiated MSCs stained positively for albumin, alpha fetoprotein, HepPar1, cytokeratin 7 and 18, and OV6 with more mature cells, hexagonal in shape with central nuclei forming large sheets in groups in 3D culture system. AAT secretion and indocyanine green uptake were significantly increased in 3D system. In experimental model, MSC-3D treated group exhibited maximal restoration of liver architecture with absent septal fibrosis and marked improvement of alanine transaminase (ALT) and aspartate transaminase (AST), and mild increase in albumin. Both 3D and 2D culture system are effective in functional hepatogenic differentiation from MSCs and serve as a vehicle in liver tissue engineering. In vivo hepatogenic differentiation is more effective on 3D scaffold, with better functional recovery.

Fabrication and Plasma Modification of Nanofibrous Tissue Engineering Scaffolds

This paper provides a comprehensive overview of nanofibrous structures for tissue engineering purposes and the role of non-thermal plasma technology (NTP) within this field. Special attention is first given to nanofiber fabrication strategies, including thermally-induced phase separation, molecular self-assembly, and electrospinning, highlighting their strengths, weaknesses, and potentials. The review then continues to discuss the biodegradable polyesters typically employed for nanofiber fabrication, while the primary focus lies on their applicability and limitations. From thereon, the reader is introduced to the concept of NTP and its application in plasma-assisted surface modification of nanofibrous scaffolds. The final part of the review discusses the available literature on NTP-modified nanofibers looking at the impact of plasma activation and polymerization treatments on nanofiber wettability, surface chemistry, cell adhesion/proliferation and protein grafting. As such, this review provides a complete introduction into NTP-modified nanofibers, while aiming to address the current unexplored potentials left within the field.

Wettability Control in Tree Structure-Based 1D Fiber Assemblies for Moisture Wicking Functionality

One of the fundamental properties of natural systems is their water transport ability, and living systems have efficient moisture management features. Here, a unique structure, inspired by the water transfer behavior in trees, was designed for one-dimensional (1D) fiber assemblies. In this 1D fiber assembly structure, a differential capillary effect enabling rapid water transfer at the interface between traditional cotton fibers and electrospun nanofibers was explored. A tree-like structure yarn was constructed successfully by novel electrospinning technology, and the effect was quantitatively controlled by precisely regulating the fibers' wettability. Fabrics based on these tree-like core-spun yarns possessed advanced moisture-wicking performance, a high one-way transport index (R) of 1034.5%, and a desirable overall moisture management capability of 0.88, which are over two times higher than those of conventional fabrics. This moisture-wicking regime endowed these 1D fiber assemblies with unique water transfer channels, providing a new strategy for moisture-heat transmission, microfluidics, and biosensor applications.

Biocompatibility of Cyclopropylamine-Based Plasma Polymers Deposited at Sub-Atmospheric Pressure on Poly (ε-caprolactone) Nanofiber Meshes

In this work, cyclopropylamine (CPA) monomer was plasma-polymerized on poly (ε-caprolactone) nanofiber meshes using various deposition durations to obtain amine-rich surfaces in an effort to improve the cellular response of the meshes. Scanning electron microscopy and X-ray photoelectron spectroscopy (XPS) were used to investigate the surface morphology and surface chemical composition of the PCL samples, respectively. The measured coating thickness was found to linearly increase with deposition duration at a deposition rate of 0.465 nm/s. XPS analysis revealed that plasma exposure time had a considerable effect on the surface N/C and O/C ratio as well as on amino grafting efficiency and amino selectivity. In addition, cell studies showed that cell adhesion and proliferation significantly improved for all coated samples.

Functional regeneration of tendons using scaffolds with physical anisotropy engineered via microarchitectural manipulation

Structural and hierarchical anisotropy underlies the structure-function relationship of most living tissues. Attempts to exploit the interplay between cells and their immediate environment have rarely featured macroscale, three-dimensional constructs required for clinical applications. Furthermore, compromises to biomechanical robustness during fabrication often limit the scaffold's relevance in translational medicine. We report a polymeric three-dimensional scaffold with tendon-like mechanical properties and controlled anisotropic microstructures. The scaffold was composed of two distinct portions, which enabled high porosity while retaining tendon-like mechanical properties. When tenocytes were cultured in vitro on the scaffold, phenotypic markers of tenogenesis such as type-I collagen, decorin, and tenascin were significantly expressed over nonanisotropic controls. Moreover, highly aligned intracellular cytoskeletal network and high nuclear alignment efficiencies were observed, suggesting that microstructural anisotropy might play the epigenetic role of mechanotransduction. When implanted in an in vivo micropig model, a neotissue that formed over the scaffold resembled native tendon tissue in composition and structure.

3D biodegradable scaffolds of polycaprolactone with silicate-containing hydroxyapatite microparticles for bone tissue engineering: high-resolution tomography and in vitro study

To date, special interest has been paid to composite scaffolds based on polymers enriched with hydroxyapatite (HA). However, the role of HA containing different trace elements such as silicate in the structure of a polymer scaffold has not yet been fully explored. Here, we report the potential use of silicate-containing hydroxyapatite (SiHA) microparticles and microparticle aggregates in the predominant range from 2.23 to 12.40 µm in combination with polycaprolactone (PCL) as a hybrid scaffold with randomly oriented and well-aligned microfibers for regeneration of bone tissue. Chemical and mechanical properties of the developed 3D scaffolds were investigated with XRD, FTIR, EDX and tensile testing. Furthermore, the internal structure and surface morphology of the scaffolds were analyzed using synchrotron X-ray µCT and SEM. Upon culturing human mesenchymal stem cells (hMSC) on PCL-SiHA scaffolds, we found that both SiHA inclusion and microfiber orientation affected cell adhesion. The best hMSCs viability was revealed at 10 day for the PCL-SiHA scaffolds with well-aligned structure (~82%). It is expected that novel hybrid scaffolds of PCL will improve tissue ingrowth in vivo due to hydrophilic SiHA microparticles in combination with randomly oriented and well-aligned PCL microfibers, which mimic the structure of extracellular matrix of bone tissue.

Hybrid polycaprolactone/polyethylene oxide scaffolds with tunable fiber surface morphology, improved hydrophilicity and biodegradability for bone tissue engineering applications

In the present study, we attempt to modify Polycaprolactone (PCL) by blending it with a water soluble polymer Polyethyleneoxide (PEO) having two different molecular weights (Mv ~1,00,000 and 6,00,000) using electrospinning technique. The effect of PEO molecular weight and blend ratio on fiber morphology, porosity, surface wettability, static and dynamic mechanical properties of PCL was investigated. In vitro degradation studies in phosphate buffer saline (PBS) at 37 °C demonstrated formation of pores on fiber surface especially in blend scaffolds with 50:50 ratios. In vitro studies using human osteoblast sarcoma (hOS) cell lines on blend scaffolds showed improved cellular response with good cell adhesion, viability and proliferation. The study revealed that incorporation of PEO on PCL scaffolds complemented the properties of PCL and facilitated fabrication of scaffolds with improved hydrophilicity, mechanical property and tunable degradation profile with better cell viability which makes it an ideal candidate for bone tissue engineering applications.

Emphasizing the role of surface chemistry on hydrophobicity and cell adhesion behavior of polydimethylsiloxane/TiO2 nanocomposite films

Improving the bioinertness of materials is of great importance for developing biomedical devices that contact human tissues. The main goal of this study was to establish correlations among surface morphology, roughness and chemistry with hydrophobicity and cell adhesion in polydimethylsiloxane (PDMS) nanocomposites loaded with titanium dioxide (TiO₂) nanoparticles. Firstly, wettability results showed that the nanocomposite loaded with 30 wt.% of TiO₂ exhibited a superhydrophobic behavior; however, the morphology and roughness analysis proved that there was no discernible difference between the surface structures of samples loaded with 20 and 30 wt.% of nanoparticles. Both cell culture and MTT assay experiments showed that, despite the similarity between the surface structures, the sample loaded with 30 wt.% nanoparticles exhibits the greatest reduction in the cell viability (80%) as compared with the pure PDMS film. According to the X-ray photoelectron spectroscopy results, the remarkable reduction in cell viability of the superhydrophobic sample could be majorly attributed to the role of surface chemistry. The obtained results emphasize the importance of adjusting the surface properties especially surface chemistry to gain the optimum cell adhesion behavior.

Development of asymmetric resorbable membranes for guided bone and surrounding tissue regeneration

Membranes design for guided tissue engineering have been studied to aid in cell viability and function as tissue barriers. Two asymmetric resorbable membranes for guided bone regeneration (GBR) were produced: chitosan/pectin/poly-caprolactone (PECm) and poly(vinyl alcohol)/polyethylenimine/poly(ethylene glycol) (PVAm). Both membranes were characterized by physical, chemical, mechanical, degradation rate, and in vitro biological assessment. Scanning electron microscopy (SEM) confirmed the membranes asymmetry, in which PECm asymmetry is given by roughness and chemical composition, while PVAm's only by differences in porosity. Fourier transform infrared spectroscopy (FTIR) identified chemical groups and bonds between polymers. Both sides of PVAm revealed to be hydrophobic, whereas the PECm presented one side with higher hydrophobicity than the other. In vitro biological assessment disclosed that PECm presented a higher cell adhesion growth pattern than PVAm, where it seemed to occur a delay in proliferation due to initial low cell adhesion. Both developed membranes are suitable for GBR, since both membranes fulfil the requirements to be used as a tissue barrier. The PECm has an additional role in cell viability that was not observed in the PVAm. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2141-2150, 2018.

The Thickness of Electrospun Poly (ε-Caprolactone) Nanofibrous Scaffolds Influences Cell Proliferation

Nanofibrous scaffolds have morphological similarities to native extracellular matrix and have been considered as candidate scaffolds in tissue engineering. However, there is no report on the effect of the thickness of nanofibrous scaffold on cell behavior. In this study poly (∊-caprolactone) (PCL) nanofibrous scaffolds with thicknesses of 0.1 and 0.6 mm were fabricated by electrospinning. Properties of PCL nanofibrous scaffolds were measured by contact angle and air permeability measurements while the morphology of the nanofibers was observed by SEM. Mouse embryonal carcinoma stem cells (P19), monkey epithelial kidney cells (Vero), Chinese hamster ovary cells (CHO) and mouse mesenchymal stem cells (MSCs) were seeded on PCL nanofibrous scaffolds with thicknesses of 0.1 and 0.6 mm. Air permeability measurements showed that air permeability decreases with the increase in the thickness of nanofibrous scaffolds, and contact angle measurements revealed a contact angle of 118° for electrospun PCL nanofibers. The MTT assays showed that the proliferation of the cells was influenced by the thickness of the nanofibrous scaffold. Scaffolds with a thickness of 0.6 mm were found to provide a better substrate for cell proliferation, possibly due to more dimensional stability. Therefore, regardless of cell origin, thicker scaffolds provide a better substrate for cell proliferation, possibly due to the higher dimensional stability and tightness of thicker scaffolds.

Axon mimicking hydrophilic hollow polycaprolactone microfibres for diffusion magnetic resonance imaging

Highly hydrophilic hollow polycaprolactone (PCL) microfibres were developed as building elements to create tissue-mimicking test objects (phantoms) for validation of diffusion magnetic resonance imaging (MRI). These microfibres were fabricated by the co-electrospinning of PCL-polysiloxane-based surfactant (PSi) mixture as shell and polyethylene oxide as core. The addition of PSi had a significant effect on the size of resultant electrospun fibres and the formation of hollow microfibres. The presence of PSi in both co-electrospun PCL microfibre surface and cross-section, revealed by X-ray energy dispersive spectroscopy (EDX), enabled water to wet these fibres completely (i.e., zero contact angle) and remained active for up to 12 months after immersing in water. PCL and PCL-PSi fibres with uniaxial orientation were constructed into water-filled phantoms. MR measurement revealed that water molecules diffuse anisotropically in the PCL-PSi phantom. Co-electrospun hollow PCL-PSi microfibres have desirable hydrophilic properties for the construction of a new generation of tissue-mimicking dMRI phantoms.

Electrospun Polycaprolactone/Aloe Vera_Chitosan Nanofibrous Asymmetric Membranes Aimed for Wound Healing Applications

Today, none of the wound dressings available on the market is fully capable of reproducing all the features of native skin. Herein, an asymmetric electrospun membrane was produced to mimic both layers of skin. It comprises a top dense layer (manufactured with polycaprolactone) that was designed to provide mechanical support to the wound and a bottom porous layer (composed of chitosan and Aloe Vera) aimed to improve the bactericidal activity of the membrane and ultimately the healing process. The results obtained revealed that the produced asymmetric membranes displayed a porosity, wettability, as well as mechanical properties similar to those presented by the native skin. Fibroblast cells were able to adhere, spread, and proliferate on the surface of the membranes and the intrinsic structure of the two layers of the membrane is capable of avoiding the invasion of microorganisms while conferring bioactive properties. Such data reveals the potential of these asymmetric membranes, in the near future, to be applied as wound dressings.

Fibers for hearts: A critical review on electrospinning for cardiac tissue engineering

Cardiac cell therapy holds a real promise for improving heart function and especially of the chronically failing myocardium. Embedding cells into 3D biodegradable scaffolds may better preserve cell survival and enhance cell engraftment after transplantation, consequently improving cardiac cell therapy compared with direct intramyocardial injection of isolated cells. The primary objective of a scaffold used in tissue engineering is the recreation of the natural 3D environment most suitable for an adequate tissue growth. An important aspect of this commitment is to mimic the fibrillar structure of the extracellular matrix, which provides essential guidance for cell organization, survival, and function. Recent advances in nanotechnology have significantly improved our capacities to mimic the extracellular matrix. Among them, electrospinning is well known for being easy to process and cost effective. Consequently, it is becoming increasingly popular for biomedical applications and it is most definitely the cutting edge technique to make scaffolds that mimic the extracellular matrix for industrial applications. Here, the desirable physico-chemical properties of the electrospun scaffolds for cardiac therapy are described, and polymers are categorized to natural and synthetic.Moreover, the methods used for improving functionalities by providing cells with the necessary chemical cues and a more in vivo-like environment are reported.

Multireactive Poly(2-oxazoline) Nanofibers through Electrospinning with Crosslinking on the Fly

Crosslinked hydrophilic poly(2-oxazoline)-based nanofibers amenable to facile multifunctionalization are fabricated using alkene-containing poly(2-alkyl-2-oxazoline)s (PAOx) via in situ photoinitiated radical thiol-ene crosslinking during electrospinning. The resulting crosslinked nanofibers are demonstrated to be multifunctionalizable using different chemistries as they contain two functional handles, being the alkene moieties from the parent copolymer and the residual thiol groups from the tetra-thiol-based crosslinker. While the thiol groups in these nanofibers could be passivated or conjugated to install functional molecules through thiol-maleimide conjugation, the alkene groups could sequentially be modified with thiol-containing molecules using photoinitiated radical thiol-ene reactions. Utilization of the photochemically induced conjugation of thiol-bearing molecules to the alkene groups on the nanofibers is used to obtain functionalization in a spatially controlled manner.

Mimosa Origami: A nanostructure-enabled directional self-organization regime of materials

One of the innate fundamentals of living systems is their ability to respond toward distinct stimuli by various self-organization behaviors. Despite extensive progress, the engineering of spontaneous motion in man-made inorganic materials still lacks the directionality and scale observed in nature. We report the directional self-organization of soft materials into three-dimensional geometries by the rapid propagation of a folding stimulus along a predetermined path. We engineer a unique Janus bilayer architecture with superior chemical and mechanical properties that enables the efficient transformation of surface energy into directional kinetic and elastic energies. This Janus bilayer can respond to pinpoint water stimuli by a rapid, several-centimeters-long self-assembly that is reminiscent of the Mimosa pudica's leaflet folding. The Janus bilayers also shuttle water at flow rates up to two orders of magnitude higher than traditional wicking-based devices, reaching velocities of 8 cm/s and flow rates of 4.7 μl/s. This self-organization regime enables the ease of fabricating curved, bent, and split flexible channels with lengths greater than 10 cm, demonstrating immense potential for microfluidics, biosensors, and water purification applications.

Fabrication and characterization of PCL/CaCO3 electrospun composite membrane for bone repair

CaCO₃/casein microspheres were entrapped in PCL membranes using electrospinning to mimic the hierarchical structure of ECM in bone. The composite membranes showed enhanced biomineralization property, proliferation and osteogenic differentiation potential of HMSCs.

Comparison of Capability of Human Bone Marrow Mesenchymal Stem Cells and Endometrial Stem Cells to Differentiate into Motor Neurons on Electrospun Poly(ε-caprolactone) Scaffold

Human endometrial and bone marrow-derived mesenchymal stem cells can be differentiated into a number of cell lineages. Mesenchymal stem cells (MSCs) are potential candidates for cellular therapy. The differentiation of human bone marrow MSCs (hBM-MSCs) and endometrial stem cells (hEnSCs) into motor neuron-like cells has been rarely investigated previously; however, the comparison between these stem cells when they are differentiated into motor neuron-like cell is yet to be studied. The aim of this study was therefore to investigate and compare the capability of hBM-MSCs and hEnSCs cultured on tissue culture polystyrene (TCP) and poly ε-caprolactone (PCL) nanofibrous scaffold to differentiate into motor neuron-like cells in the presence of neural inductive molecules. Engineered hBM-MSCs and hEnSCs seeded on PCL nanofibrous scaffold were differentiated into beta-tubulin III, islet-1, Neurofilament-H (NF-H), HB9, Pax6, and choactase-positive motor neurons by immunostaining and real-time PCR, in response to the signaling molecules. The data obtained from PCR and immunostaining showed that the expression of motor neuron markers of both hBM-MSCs and hEnSCs differentiated cells on PCL scaffold are significantly higher than that of the control group. The expression of these markers in hEnSCs differentiated cells was higher than that in hBM-MSCs. However, this difference was not statistically significant. In conclusion, differentiated hBM-MSCs and hEnSCs on PCL can provide a suitable three-dimensional situation for neuronal survival and outgrowth for regeneration of the central nervous system. Both cells may be potential candidates for cellular therapy in motor neuron disorders. However, differentiation of hEnSCs into motor neuron-like cells was better than hBM-MSCs.

Differentiation of Wharton's Jelly-Derived Mesenchymal Stem Cells into Motor Neuron-Like Cells on Three-Dimensional Collagen-Grafted Nanofibers

Cell transplantation strategies have provided potential therapeutic approaches for treatment of neurodegenerative diseases. Mesenchymal stem cells from Wharton's jelly (WJMSCs) are abundant and available adult stem cells with low immunological incompatibility, which could be considered for cell replacement therapy in the future. However, MSC transplantation without any induction or support material causes poor control of cell viability and differentiation. In this study, we investigated the effect of the nanoscaffolds on WJMSCs differentiation into motor neuronal lineages in the presence of retinoic acid (RA) and sonic hedgehog (Shh). Surface properties of scaffolds have been shown to significantly influence cell behaviors such as adhesion, proliferation, and differentiation. Therefore, polycaprolactone (PCL) nanofibers were constructed via electrospinning, surface modified by plasma treatment, and grafted by collagen. Characterization of the scaffolds by means of ATR-FTIR, contact angel, and Bradford proved grafting of the collagen on the surface of the scaffolds. WJMSCs were seeded on nanofibrous and tissue culture plate (TCP) and viability of WJMSCs were measured by MTT assay and then induced to differentiate into motor neuron-like cells for 15 days. Differentiated cells were evaluated morphologically, and real-time PCR and immunocytochemistry methods were done to evaluate expression of motor neuron-like cell markers in mRNA and protein levels. Our results showed that obtained cells could express motor neuron biomarkers at both RNA and protein levels, but the survival and differentiation of WJMSCs into motor neuron-like cells on the PCL/collagen scaffold were higher than cultured cells in the TCP and PCL groups. Taken together, WJMSCs are an attractive stem cell source for inducing into motor neurons in vitro especially when grown on nanostructural scaffolds and PCL/collagen scaffolds can provide a suitable, three-dimensional situation for neuronal survival and differentiation that suggest their potential application towards nerve regeneration.

Surface grafting of chitosan shell, polycaprolactone core fiber meshes to confer bioactivity

Electrospinning of polyesters (e.g. polycaprolactone) is an attractive approach for fabricating meshes with mechanical properties suitable for orthopedic tissue engineering applications. However, the resultant fused-fiber meshes are biologically inert, necessitating surface grafting of bioactive factors to stimulate cell adhesion. In this study, hydrophilic meshes displaying primary amine groups were prepared by coaxially electrospinning fibers with a chitosan/poly(ethylene oxide) shell and a polycaprolactone core. These chitosan–polycaprolactone fiber meshes were mechanically robust (Young’s modulus of 10.1 ± 1.6 MPa under aqueous conditions) with tensile properties comparable to polycaprolactone fiber meshes. Next, the integrin adhesion peptide arginine–glycine–aspartic acid was grafted to chitosan–polycaprolactone fiber meshes. Cell culture studies using bone marrow stromal cells indicated significantly better initial attachment and spreading on arginine–glycine–aspartic acid–conjugated fiber meshes. Specifically, metabolic activity, projected cell area, and cell aspect ratio were all elevated relative to cells seeded on polycaprolactone and unmodified chitosan–polycaprolactone meshes. These results demonstrate a flexible two-step process for creating bioactive electrospun fiber meshes.

Is the poly (L- lactide- co- caprolactone) nanofibrous membrane suitable for urinary bladder regeneration?

The purpose of this study was to compare: a new five-layered poly (L-lactide-co-caprolactone) (PLC) membrane and small intestinal submucosa (SIS) as a control in rat urinary bladder wall regeneration. The five-layered poly (L-lactide-co-caprolactone) membrane was prepared by an electrospinning process. Adipose tissue was harvested from five 8-week old male Wistar rats. Adipose derived stem cells (ADSCs) were seeded in a density of 3×10(6) cells/cm2 onto PLC membrane and SIS scaffolds, and cultured for 5-7 days in the stem cell culture medium. Twenty male Wistar rats were randomly divided into five equal groups. Augmentation cystoplasty was performed in a previously created dome defect. Groups: (I) PLC+ 3×10(6)ADSCs; (II) SIS+ 3×10(6)ADSCs; (III) PLC; (IV) SIS; (V) control. Cystography was performed after three months. The reconstructed urinary bladders were evaluated in H&E and Masson's trichrome staining. Regeneration of all components of the normal urinary bladder wall was observed in bladders augmented with cell-seeded SIS matrices. The urinary bladders augmented with SIS matrices without cells showed fibrosis and graft contraction. Bladder augmentation with the PLC membrane led to numerous undesirable events including: bladder wall perforation, fistula or diverticula formation, and incorporation of the reconstructed wall into the bladder lumen. The new five-layered poly (L-lactide-co-caprolactone) membrane possesses poorer potential for regenerating the urinary bladder wall compared with SIS scaffold.

Glycolic acid functionalized chitosan-Au-Fe₃O₄ hybrid nanoparticle based nanohybrid scaffold for drug delivery

The research on biomedical applications of nanoparticles has seen an upsurge in recent years due to their unique capabilities in treatment of ailments. The present paper reports the synthesis of Au-Fe(3)O(4) hybrid nanoparticles. The formation of these nanoparticles was confirmed by transmission electron microscopy (TEM) and physical property measurement system (PPMS). Next step of this paper reveals potential use of novel hybrid of chitosan-g-glycolic acid and Au-Fe(3)O(4) hybrid nanoparticles in controlled drug delivery and tissue engineering applications. Grafting of glycolic acid and drug loading in porous scaffold was characterized by Fourier transform infrared spectroscopy. The nanohybrid scaffolds were found to be stable regardless of pH of the medium and play a key role in cell adhesion, proliferation and migration. Au-Fe(3)O(4) hybrid nanoparticles reinforcement was found to control the drug (cyclophosphamide) release rate in phosphate buffer saline solution (pH 7.4). Therefore, Au-Fe(3)O(4) hybrid nanoparticles are viable additive for formulating sustained drug delivery systems based on glycolic acid grafted chitosan. The cell proliferation profile also shows that prepared nanohybrid is biocompatible providing suitable substrates for tissue engineering.