Analysis of the biomineralization process on SWNT-COOH and F-SWNT films

Carbon nanotubes accelerates the bio-induced vivianite formation

Vivianite widely existed in digested sludge and activated sludge as a potential phosphate resource recovered from wastewater treatment plants (WWTPs). As an important product of extracellular electron transfer (EET) and biological iron reduction, the production of vivianite can be enhanced by conductive materials. Carbon nanotubes (CNTs) with excellent electrical conductivity have been reported to promote electron transfer, which was applied in wastewater treatment to accelerate the degradation of the contaminants. However, the impact of CNTs on vivianite formation was barely reported. In this study, the iron reduction, vivianite recovery, and the biotoxicity of CNTs were investigated in order to determine the influence of CNTs towards the vivianite production. The enhancement of vivianite production after CNTs adding reached up to 17 % by promoting the electron transfer between dissimilative iron-reducing bacteria (DIRB) and Fe(III). However, at the initial stage (0-24 h), Fe(III) reduction efficiency decreased by 81 % after inoculating with sewage sludge, which was attributed to CNTs destroying of the cell membrane (as indicated by SEM, CLSM and AFM analysis). The biotoxicity of CNTs stimulated DIRB to secret extracellular polymeric substances (EPS) and form bio-flocs to resist the physical puncture. After 48 h, the proportion of living DIRB in 1000 mg/L CNTs batch increased to 98 %, which was 79 % higher than 12 h. As a result, the vivianite recovery of raw sewage with 1000 mg/L CNTs increased to 44 ± 1 %, which was 33 % higher than that in the CNT-0.

Exploring the in vitro and in vivo compatibility of PLA, PLA/GNP and PLA/CNT-COOH biodegradable nanocomposites: Prospects for tendon and ligament applications

Anterior cruciate ligament (ACL) reconstructive surgeries are the most frequent orthopedic procedures in the knee. Currently, existing strategies fail in completely restoring tissue functionality and have a high failure rate associated, presenting a compelling argument towards the development of novel materials envisioning ACL reinforcement. Tendons and ligaments, in general, have a strong demand in terms of biomechanical features of developed constructs. We have previously developed polylactic acid (PLA)-based biodegradable films reinforced either with graphene nanoplatelets (PLA/GNP) or with carboxyl-functionalized carbon nanotubes (PLA/CNT-COOH). In the present study, we comparatively assessed the biological performance of PLA, PLA/GNP, and PLA/CNT-COOH by seeding human dermal fibroblasts (HFF-1) and studying cell viability and proliferation. In vivo tests were also performed by subcutaneous implantation in 6-week-old C57Bl/6 mice. Results showed that all formulations studied herein did not elicit cytotoxic responses in seeded HFF-1, supporting cell proliferation up to 3 days in culture. Moreover, animal studies indicated no physiological signs of severe inflammatory response after 1 and 2 weeks after implantation. Taken together, our results present a preliminary assessment on the compatibility of PLA reinforced with GNP and CNT-COOH nanofillers, highlighting the potential use of these carbon-based nanofillers for the fabrication of reinforced synthetic polymer-based structures for ACL reinforcement. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2182-2190, 2017.

A comparative study on the effects of pristine and functionalized single-walled carbon nanotubes on osteoblasts: ultrastructural and biochemical properties

A comparative study was performed to investigate the ultrastructural and biomolecular properties of osteoblasts induced by three types of single-walled carbon nanotubes (SWNTs). The results on cellular uptake and ultrastructural alteration indicate that SWNTs enter osteoblasts by endocytosis. SWNTs-COOH and SWNTs-OH particles were freely dispersed in the cytoplasm, while pristine SWNTs were localized to the periphery of the cell. Both SWNTs-OH and SWNTs-COOH promoted cell changes in cell activity regarding mRNA expression at doses of 50 and 100 μg/mL in the first 24 h. When treated with 50 μg/mL SWNTs-COOH for 48 h, the expression of type I collagen increased by 6.3-fold (for MG63) or 9.1-fold (for primary osteoblasts) compared with the control group. The present study observed for the first time that SWNTs-COOH initiated the prompt and the maximum upregulation of type I collagen gene expression, and simultaneously induced the expansion of the endoplasmic reticulum for increased protein synthesis, which in turn accelerated the mineralization process. However, impaired cell properties and mitochondrial injury were detected following treatment with SWNTs at 100 μg/mL after 48 h. In conclusion, we believe that SWNTs-COOH is a good candidate for the fabrication of biomedical scaffolds for bone regeneration.

Bioinspired nanoscale materials for biomedical and energy applications

The demand for green, affordable and environmentally sustainable materials has encouraged scientists in different fields to draw inspiration from nature in developing materials with unique properties such as miniaturization, hierarchical organization and adaptability. Together with the exceptional properties of nanomaterials, over the past century, the field of bioinspired nanomaterials has taken huge leaps. While on the one hand, the sophistication of hierarchical structures endows biological systems with multi-functionality, the synthetic control on the creation of nanomaterials enables the design of materials with specific functionalities. The aim of this review is to provide a comprehensive, up-to-date overview of the field of bioinspired nanomaterials, which we have broadly categorized into biotemplates and biomimics. We discuss the application of bioinspired nanomaterials as biotemplates in catalysis, nanomedicine, immunoassays and in energy, drawing attention to novel materials such as protein cages. Furthermore, the applications of bioinspired materials in tissue engineering and biomineralization are also discussed.

Carbon-based nanomaterials for tissue engineering

Carbon-based nanomaterials such as graphene sheets and carbon nanotubes possess unique mechanical, electrical, and optical properties that present new opportunities for tissue engineering, a key field for the development of biological alternatives that repair or replace whole or a portion of tissue. Carbon nanomaterials can also provide a similar microenvironment as like a biological extracellular matrix in terms of chemical composition and physical structure, making them a potential candidate for the development of artificial scaffolds. In this review, we summarize recent research advances in the effects of carbon nanomaterial-based substrates on cellular behaviors, including cell adhesion, proliferation, and differentiation into osteo- or neural- lineages. The development of 3D scaffolds based on carbon nanomaterials (or their composites with polymers and inorganic components) is introduced, and the potential of these constructs in tissue engineering, including toxicity issues, is discussed. Future perspectives and emerging challenges are also highlighted.

Carbon nanostructures for orthopedic medical applications

Carbon nanostructures (including carbon nanofibers, nanostructured diamond, fullerene materials and so forth) possess extraordinary physiochemical, mechanical and electrical properties attractive to bioengineers and medical researchers. In the past decade, numerous developments towards the fabrication and biological studies of carbon nanostructures have provided opportunities to improve orthopedic applications. Therefore, the aim of this article is to provide an up-to-date review on carbon nanostructure advances in orthopedic research. Orthopedic medical device applications of carbon nanotubes/carbon nanofibers and nanostructured diamond (including particulate nanodiamond and nanocrystalline diamond coatings) are emphasized here along with other carbon nanostructures that have promising potential. In addition, widely used fabrication techniques for producing carbon nanostructures in both the laboratory and in industry are briefly introduced. In conclusion, carbon nanostructures have demonstrated tremendous promise for orthopedic medical device applications to date, and although some safety, reliability and durability issues related to the manufacturing and implantation of carbon nanomaterials remain, their future is bright.

In vitro calcification of chemically functionalized carbon nanotubes

Bone is composed of two phases. The organic phase is made of collagen fibrils assembled in broad fibers acting as a template for mineralization. The mineral phase comprises hydroxyapatite (HAP) crystals grown between and inside the collagen fibers. We have developed a biomimetic material using functionalized carbon nanotubes as scaffold to initiate in vitro mineralization. Biomimetic formation of HAP was performed on single-walled carbon nanotubes (SWCNTs) which have been grafted with carboxylic groups. Two types of nanotubes, HiPco(R) and Carbon Solutions(R), were oxidized via various acidic processes, leading to five different groups of carboxylated nanotubes, fully characterized by physical methods (thermogravimetric analysis, attenuated total reflectance infrared spectroscopy and X-ray photoelectron spectroscopy). All samples were dispersed in ultra-pure water and incubated for 2weeks in a synthetic body fluid, in order to induce the calcification of the SWCNTs. Scanning electron microscopy (SEM) and energy-dispersive X-ray analysis studies showed that Ca(2+) and PO(4)(3-) ions were deposited as round-shaped nodules (calcospherites) on the carboxylated SWCNTs. Fourier transform infrared and Raman spectroscopic studies confirmed the HAP formation, and image analysis made on SEM pictures showed that calcospherites and carboxylated SWCNTs were packed together. The size of calcospherites thus obtained in vitro from the HiPco(R) series was close to that issued from calcospherites observed in vivo. Functionalization of SWCNTs with carboxylic groups confers the capacity to induce calcification similar to woven bone.