Nano-sized α and β-TCP powders prepared by high temperature flame spray pyrolysis

α-TCP-based Calcium Phosphate Cements: a critical review

Calcium phosphates are promising materials for applications in bone repair and substitution, particularly for their bioactivity and ability to form self-setting cements. Among them, α-tricalcium phosphate (α-TCP) stands out due to its high solubility, its hydration reaction and bioresorbability. The synthesis of α-TCP is particularly complex and the interactions between some of the synthesis parameters are still not completely understood. The variety of methods available to synthesize α-TCP has provided a substantial variance in the properties of α-TCP-based cements and the decision about which method, parameters and starting reagents will be used for the powder's synthesis is determinant of the properties of the resulting material. Therefore, this review paper focuses on α-TCP's synthesis and properties, presenting the synthesis methods currently in use as well as a discussion of how the synthesis parameters and the cement preparation affect the reactivity and mechanical properties of the material, providing a guide for the selection of the most suitable process for each α-TCP application. STATEMENT OF SIGNIFICANCE: α-TCP is a calcium phosphate and it is currently one of the most investigated bioceramics for applications that explore its bioresorbability and the hydration reaction of α-TCP-based cements. Despite the increasing number of publications on the topic, there are still aspects not well understood. This review article aims at contributing to this fascinating subject by offering an update on the state of the art of α-TCP's synthesis methods, while also addressing topics that are not often discussed about this material, such as the preparation of α-TCP-based cements and how its parameters affect the properties of the resulting cements.

Solvothermal synthesis of β-tricalcium phosphate porous nanospheres by using organic phosphorus source and their biomedical potentials

Uniform β-tricalcium phosphate porous nanospheres with substructures are prepared by a solvothermal method using (CH₃O)₃PO as the organic phosphorus source and they demonstrate excellent biocompatibility.

Advances in synthesis of calcium phosphate crystals with controlled size and shape

Calcium phosphate (CaP) materials have a wide range of applications, including biomaterials, adsorbents, chemical engineering materials, catalysts and catalyst supports and mechanical reinforcements. The size and shape of CaP crystals and aggregates play critical roles in their applications. The main inorganic building blocks of human bones and teeth are nanocrystalline CaPs; recently, much progress has been made in the application of CaP nanocrystals and their composites for clinical repair of damaged bone and tooth. For example, CaPs with special micro- and nanostructures can better imitate the biomimetic features of human bone and tooth, and this offers significantly enhanced biological performances. Therefore, the design of CaP nano-/microcrystals, and the shape and hierarchical structures of CaPs, have great potential to revolutionize the field of hard tissue engineering, starting from bone/tooth repair and augmentation to controlled drug delivery devices. Previously, a number of reviews have reported the synthesis and properties of CaP materials, especially for hydroxyapatite (HAp). However, most of them mainly focused on the characterizations and physicochemical and biological properties of HAp particles. There are few reviews about the control of particle size and size distribution of CaPs, and in particular the control of nano-/microstructures on bulk CaP ceramic surfaces, which is a big challenge technically and may have great potential in tissue engineering applications. This review summarizes the current state of the art for the synthesis of CaP crystals with controlled sizes from the nano- to the macroscale, and the diverse shapes including the zero-dimensional shapes of particles and spheres, the one-dimensional shapes of rods, fibers, wires and whiskers, the two-dimensional shapes of sheets, disks, plates, belts, ribbons and flakes and the three-dimensional (3-D) shapes of porous, hollow, and biomimetic structures similar to biological bone and tooth. In addition, this review will also summarize studies on the controlled formation of nano-/microstructures on the surface of bulk ceramics, and the preparation of macroscopical bone grafts with 3-D architecture nano-/microstructured surfaces. Moreover, the possible directions of future research and development in this field, such as the detailed mechanisms behind the size and shape control in various strategies, the importance of theoretical simulation, self-assembly, biomineralization and sacrificial precursor strategies in the fabrication of biomimetic bone-like and enamel-like CaP materials are proposed.

The facile and low temperature synthesis of nanophase hydroxyapatite crystals using wet chemistry

A simple and facile wet chemistry route was used to synthesize nanophase hydroxyapatite (HaP) crystals at low temperature. The synthesis was carried out at a pH of 11.0 and at a temperature of 37°C. The resulting samples were washed several times and subjected to further analysis. XRD studies revealed that the HaP crystals were polycrystalline in nature with a crystallite size of ~15-60 ± 5 nm. SEM-EDXA images confirmed the presence of calcium (Ca), phosphorous (P), and oxygen (O) peaks. Likewise, FTIR confirmed the presence of characteristic phosphate and hydroxyl peaks in samples. Lastly, HRTEM images clearly showed distinctive lattice fringes positioned in the 100 and 002 planes. TGA analysis shows that HaP crystals can withstand higher calcination temperatures and are thermally stable.

Gelation behavior of in situ forming gels based on HPMC and biphasic calcium phosphate nanoparticles

In this study, in situ forming gels are prepared using biphasic calcium phosphate (BCP) as filler and hydroxypropyl methylcellulose (HPMC) as a matrix exhibiting temperature-sensitive behavior. BCP was composed of β-tricalcium phosphate (β-TCP) with plate-like morphology and nano-sized hyadroxyapatite (HAp). Gel permeation chromatography (GPC) and rheological results showed that low molecular weight HPMC had lower gelation temperature. Effects of BCP content and HAp/β-TCP ratio on rheological behavior of the gels were investigated. According to the results, all samples showed a pseudoplastic behavior and their viscosity increased with increasing mineral phase, especially β-tricalcium phosphate. In order to investigate interaction mechanisms between the mineral phase and polymer and also the effects of ion release, particle size, hydrophobisity, and hydrophilisity, hydrophobic and hydrophilic silica with different particle sizes were also utilized. Results showed that factors affecting the hydrophobisity and hydrophilisity of solution may influence the rheological properties.

Nanodimensional and Nanocrystalline Apatites and Other Calcium Orthophosphates in Biomedical Engineering, Biology and Medicine

Recent developments in biomineralization have already demonstrated that nanosized particles play an important role in the formation of hard tissues of animals. Namely, the basic inorganic building blocks of bones and teeth of mammals are nanodimensional and nanocrystalline calcium orthophosphates (in the form of apatites) of a biological origin. In mammals, tens to hundreds nanocrystals of a biological apatite were found to be combined into self-assembled structures under the control of various bioorganic matrixes. In addition, the structures of both dental enamel and bones could be mimicked by an oriented aggregation of nanosized calcium orthophosphates, determined by the biomolecules. The application and prospective use of nanodimensional and nanocrystalline calcium orthophosphates for a clinical repair of damaged bones and teeth are also known. For example, a greater viability and a better proliferation of various types of cells were detected on smaller crystals of calcium orthophosphates. Thus, the nanodimensional and nanocrystalline forms of calcium orthophosphates have a great potential to revolutionize the field of hard tissue engineering starting from bone repair and augmentation to the controlled drug delivery devices. This paper reviews current state of knowledge and recent developments of this subject starting from the synthesis and characterization to biomedical and clinical applications. More to the point, this review provides possible directions of future research and development.