Immobilization of laccase onto poly(glycidylmethacrylate) brush grafted poly(hydroxyethylmethacrylate) films: Enzymatic oxidation of phenolic compounds

Curcumin-Sodium Alginate and Curcumin-Chitosan Conjugates as Drug Delivery Systems: An Interesting Rheological Behaviour

The conjugation of polyphenols is a valuable strategy with which to confer tailored properties to polymeric materials of biomedical interest. Within this investigation, we aim to explore the possibility to use this synthetic approach to increase the viscosity of conjugates, thus allowing the release of a loaded therapeutic to be better controlled over time than in neat polyphenols. Curcumin (CUR) was conjugated to sodium alginate (CA) and chitosan (CS) with functionalisation degrees of 9.2 (SA-CUR) and 15.4 (CS-CUR) mg g-1. Calorimetric analyses showed higher degrees of chain rigidity upon conjugation, with a shift of the degradation peaks to higher temperatures (from 239 to 245 °C and from 296 to 303 °C for SA-CUR and CS-CUR, respectively). Rheological analyses were used to prove the enhanced interconnection between the polymer chains in the conjugates, confirmed by the weak gel parameters, A and z. Moreover, the typical non-Newtonian behaviour of the high-molecular-weight polysaccharides was recorded, together with an enhancement of the activation energy, Ea, in CS-CUR vs. CS (opposite behaviour recorded for SA-CUR vs. SA). The evaluation of the delivery performance (of Doxorubicin as a model drug) showed sustained release profiles, opening opportunities for the development of controlled delivery systems.

Metal-Chelated Polymeric Nanomaterials for the Removal of Penicillin G Contamination

We developed selective and relatively low-cost metal-chelated nanoparticle systems for the removal of the penicillin G (Pen G) antibiotic, presented for the first time in the literature. In the nanosystem, poly(glycidyl methacrylate) nanoparticles were synthesized by a surfactant-free emulsion polymerization method and covalently bound with a tridentate-chelating ligand, iminodiacetic acid, based on the immobilized metal chelate affinity technique. It was modified with Cu²⁺, a chelating metal, to make Pen G specific. Metal-chelated nanoparticles were characterized by Fourier-transform infrared spectroscopy, energy dispersive spectrometry, zeta dimensional analysis, and scanning electron microscopy technology. Optimization studies of the Pen G removal were conducted. As a result of this study, Pen G removal with the p(GMA)-IDA-Cu²⁺ nanoparticle reached its maximum adsorption capacity of 633.92 mg/g in the short time of 15 min. The Pen G adsorption of p(GMA)-IDA-Cu²⁺ was three times more than that of the p(GMA) nanoparticles and two times more than that of the ampicillin adsorption. In addition, there was no significant decrease in the adsorption capacity of Pen G resulting from the repeated adsorption-desorption process of metal-chelated nanoparticles over five cycles. The metal-chelated nanoparticle had an 84.5% ability to regain its ability to regenerate the product with its regeneration capability, making the widespread use of the system very convenient in terms of reducing cost, an important factor in removal processes.

Functionalized chitosan and sodium alginate for the effective removal of recalcitrant organic pollutants

In this work, the study of an oxidative-coupling reaction by immobilization of laccase or horseradish peroxidase (HRP) onto chitosan and sodium alginate was reported. The oxidative-coupling reaction of three recalcitrant organic pollutants (ROPs) such as chlorophenol compounds including 2,4-dichlorophenol (DCP), 2,4,6- trichlorophenol (TCP), pentachlorophenol (PCP) was studied. The results showed that the systems with immobilized laccase or horseradish peroxidase had broader range of optimum pH and temperature when compared to that of free laccase and horseradish peroxidase. The removal efficiencies of DCP, TCP and PCP within 6 h were found to be 77 %, 90 % and 83 %, respectively. The rate constants of the first order reactions for laccase were arranged as 0.30 h^-1 (TCP) > 0.13 h^-1 (DCP) > 0.11 h^-1 (PCP) and the rate constants for HRP were arranged as 0.42 h^-1 (TCP) > 0.32 h^-1 (PCP) > 0.25 h^-1 (DCP). The removal rate of TCP was found to be the highest among all and the removal efficiency of ROPs by HRP was always better than that of laccase. The major products of the reaction were identified by LC-MS and confirmed as humic-like polymers.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Synthesis and Characterization of a New Cryogel Matrix for Covalent Immobilization of Catalase

The advantages of cryogels for enzyme immobilization applications include their mechanical and chemical robustness, ease of production, superior porosity, and low cost. Currently, many researchers are exploring porous material-based systems for enzyme immobilization that are more efficient and economically viable. Here, poly(2-Hydroxyethyl methacrylate-co-allyl glycidyl ether) (p(HEMA-co-AGE)) cryogel matrices were synthesized via the free radical cryopolymerization method to be employed as the support material. For the immobilization of the catalase enzyme onto the p(HEMA-co-AGE) cryogel matrix (catalase@p(HEMA-co-AGE), the best possible reaction conditions were determined by altering parameters such as pH, catalase initial concentration, and flow rate. The maximum catalase immobilization amount onto the p(HEMA-co-AGE) cryogel was found to be 48 mg/g cryogel. To determine the advantages of the cryogel matrix, e.g., the stability and reusability of the cryogel matrix, the adsorption–desorption cycles for the catalase enzyme were repeated five times using the same cryogel matrix. At the end of the reusability tests, it was found that the cryogel was very stable and maintained its adsorption capacity with the recovery ratio of 93.8 ± 1.2%. Therefore, the p(HEMA-co-AGE) cryogel matrix affords repeated useability, e.g., up to five times, without decreasing its catalase binding capacities significantly and has promising potential for many industrial applications. Cryogels offer clear distinctive advantages over common materials, e.g., micro/nano particles, hydrogels, films, and composites for these applications. At present, many researchers are working on the design of more effective and economically feasible, porous material-based systems for enzyme immobilization

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.

One-step self-assembly of magnetic supramolecular metal-organic coordination functionalized MoS2 complex as nanoenzyme-reactor

In the present study, a kind of magnetic supramolecular metal-organic coordination complex (SMOCC) functionalized MoS₂ was prepared with one-step in aqueous solution for enzyme immobilization. As possessing a protective nanocoating of PDA/PEI/Cu²⁺ (polydopamine: PDA, polyethyleneimine: PEI), the proposed material can provide biocompatible microenvironment and flexible adhesion force on particle interface, which is conductive to loading laccase (170.0 ± 1.8 mg/g) with high activity (93.0 ± 1.1 %). Compared with the free laccase, the immobilized laccase has higher stability in a broader range of pH (3-10), temperature (20-80 °C), storage time (1-18 days) and reusability (1-16 cycles). The removal of carcinogenic persistent organic pollutant malachite green in the water with the immobilized laccase shows a higher efficiency (89.4 ± 1.2 %) than free laccase (16.2 ± 0.2 %). The Fe₃O₄@MoS₂@(PDA/PEI/Cu²⁺) nanocomposites can also be used successfully to immobilize trypsin, lipase and catalase respectively, showing a satisfactory enzyme loading (157.0 ± 0.1 mg/g, 151.6 ± 1.4 mg/g, 162.6 ± 1.6 mg/g, respectively) and activity (95.0 ± 0.5 %, 90.0 ± 0.8 %, 91.0 ± 0.9 %, respectively). The MoS₂ can be replaced by carbon material and similar results can be obtained.

Recent environmental applications of and development prospects for immobilized laccase: a review

Laccases have enormous potential as promising 'green' biocatalysts in environmental applications including wastewater treatment and polluted soil bioremediation. The catalytic oxidation reaction they perform uses only molecular oxygen without other cofactors, and the only product after the reaction is water. The immobilization of laccase offers several improvements such as protected activity and enhanced stability over free laccase. In addition, the reusability of immobilized laccase is adistinct advantage for future applications. This review covers the sources of and progress in laccase research, and discusses the different methodologies of laccase immobilization that have emerged in the recent 5-10 years, as well as its applications to environmental fields, and evaluates these emerging technologies. Abbreviations: (2,4,6-TCP): 2,4,6-trichlorophenol; (2,4-DCP): 2,4-dichlorophenol; (ABTS), 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid); (ACE), acetaminophen; (BC-AS), almond shell; (BC-PM), pig manure; (BC-PW), pine wood; (BPA), bisphenol A; (BPA), bisphenol A; (BPF), bisphenol F; (BPS), bisphenol S; (C₆₀), fullerene; (Ca-AIL), calcium-alginate immobilized laccase; (CBZ), carbamazepine; (CETY), cetirizine; (CHT-PGMA-PEI-Cu (II) NPs), Cu (II)-chelated chitosan nanoparticles; (CLEAs), cross-linked enzyme aggregates; (CMMC), carbon-based mesoporous magnetic composites; (COD), chemical oxygen demand; (CPH), ciprofloxacin hydrochloride; (CS), chitosan; (CTC), chlortetracycline; (Cu-AIL), copper-alginate immobilized laccase; (DBR K-4BL), Drimarene brilliant red K-4BL; (DCF), diclofenac; (E1),estrone; (E2), 17 β-estradiol; (EDC), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride; (EDCs), endocrine disrupting chemicals; (EE2), 17α-ethinylestradiol; (EFMs), electrospun fibrous membranes; (FL), free laccase; (fsMP), fumed silica microparticles; (GA-CBs), GLU-crosslinked chitosan beads; (GA-CBs), glutaraldehyde-crosslinked chitosan beads; (GA-Zr-MOF), graphene aerogel-zirconium-metal organic framework; (GLU), glutaraldehyde; (GO), graphene oxide; (HMCs), hollow mesoporous carbon spheres; (HPEI/PES), hyperbranched polyethyleneimine/polyether sulfone; (IC), indigo carmine; (IL), immobilized laccase; (k_cat), catalytic constant; (K_m), Michealis constant; (M-CLEAs), Magnetic cross-linked enzyme aggregates; (MMSNPs-CPTS-IDA-Cu²⁺), Cu²⁺-chelated magnetic mesoporous silica nanoparticles; (MSS), magnetic mesoporous silica spheres; (MWNTs), multi-walled carbon nanotubes; (MWNTs), multi-walled carbon nanotubes; (NHS), N-hydroxy succinimide; (O-MWNTs), oxidized-MWNTs; (P(AAm-NIPA)), poly(acrylamide-N-isopropylacrylamide); (p(GMA)), poly(glycidyl methacrylate); (p(HEMA)), poly(hydroxyethyl methacrylate); (p(HEMA-g-GMA)-NH₂, poly(glycidyl methacrylate) brush grafted poly(hydroxyethyl methacrylate); (PA6/CHIT), polyamide 6/chitosan; (PAC), powdered active carbon; (PAHs), polycyclic aromatic hydrocarbons; (PAM-CTS), chitosan grafted polyacrylamide hydrogel; (PAN/MMT/GO), polyacrylonitrile/montmorillonite/graphene oxide; (PAN/PVdF), polyacrylonitrile/polyvinylidene fluoride; (PEG), poly ethylene glycol; (PEI), Poly(ethyleneimine); (poly(4-VP)), poly(4-vinyl pyridine); (poly(GMA-MAA)), poly(glycidyl methacrylate-methacrylic acid); (PVA), polyvinyl alcohol; (RBBR), Remazol Brilliant Blue R; (SDE), simulated dye effluent; (semi-IPNs), semi-interpenetrating polymer networks; (TC), tetracycline; (TCH), tetracycline hydrochloride; (TCS), triclosan; (Vmax), maximum activity; (Zr-MOF, MMU), micro-mesoporous Zr-metal organic framework.

Recent Advances in Hybrid Biomimetic Polymer-Based Films: from Assembly to Applications

Biological membranes, in addition to being a cell boundary, can host a variety of proteins that are involved in different biological functions, including selective nutrient transport, signal transduction, inter- and intra-cellular communication, and cell-cell recognition. Due to their extreme complexity, there has been an increasing interest in developing model membrane systems of controlled properties based on combinations of polymers and different biomacromolecules, i.e., polymer-based hybrid films. In this review, we have highlighted recent advances in the development and applications of hybrid biomimetic planar systems based on different polymeric species. We have focused in particular on hybrid films based on (i) polyelectrolytes, (ii) polymer brushes, as well as (iii) tethers and cushions formed from synthetic polymers, and (iv) block copolymers and their combinations with biomacromolecules, such as lipids, proteins, enzymes, biopolymers, and chosen nanoparticles. In this respect, multiple approaches to the synthesis, characterization, and processing of such hybrid films have been presented. The review has further exemplified their bioengineering, biomedical, and environmental applications, in dependence on the composition and properties of the respective hybrids. We believed that this comprehensive review would be of interest to both the specialists in the field of biomimicry as well as persons entering the field.

Electrospun Weak Anion-exchange Fibrous Membranes for Protein Purification

Membrane based ion-exchange (IEX) and hydrophobic interaction chromatography (HIC) for protein purification is often used to remove impurities and aggregates operated under the flow-through mode. IEX and HIC are also limited by capacity and recovery when operated under bind-and-elute mode for the fractionation of proteins. Electrospun nanofibrous membrane is characterized by its high surface area to volume ratio and high permeability. Here tertiary amine ligands are grafted onto the electrospun polysulfone (PSf) and polyacrylonitrile (PAN) membrane substrates using UV-initiated polymerization. Static and dynamic binding capacities for model protein bovine serum albumin (BSA) were determined under appropriate bind and elute buffer conditions. Static and dynamic binding capacities in the order of ~100 mg/mL were obtained for the functionalized electrospun PAN membranes whereas these values reached ~200 mg/mL for the functionalized electrospun PSf membranes. Protein recovery of over 96% was obtained for PAN-based membranes. However, it is only 56% for PSf-based membranes. Our work indicates that surface modification of electrospun membranes by grafting polymeric ligands can enhance protein adsorption due to increased surface area-to-volume ratio.

Laccase immobilization on amino-functionalized magnetic metal organic framework for phenolic compound removal

An amino-functionalized magnetic metal organic framework (MOF), Fe₃O₄-NH₂@MIL-101(Cr), was employed for laccase immobilization for the first time. The immobilized laccase was synthesized by the adsorption and covalent binding method, thus exhibited high activity recovery, large immobilization capacity and good tolerance to low pH and high temperature conditions. The excellent stability enabled the immobilized laccase to retain 89% of its initial activity after storage for 28 days. When the ambient temperature reached 85 °C, the immobilized laccase showed 49.1% residual activity even after 6 h preservation. The stability of laccase in organic solvents such as methanol was also greatly improved. Application of the immobilized laccase for 2,4-dichlorophenol removal was also investigated. The adsorption by Fe₃O₄-NH₂@MIL-101(Cr) contributed to a quick removal in the first hour, and the removal efficiency reached 87% eventually. When the reaction was completed, the immobilized laccase could be separated from the solution by a magnet. The results introduced a novel support for laccase immobilization, and the immobilized laccase had great potential in wastewater treatment.

Biodegradation of Cibacron Blue 3GA by insolubilized laccase and identification of enzymatic byproduct using MALDI-ToF-MS: Toxicity assessment studies by Daphnia magna and Chlorella vulgaris

The presented paper describes a detailed study on the use of immobilized laccase for effective degradation of Cibacron Blue 3GA dye. The amount of laccase loading on the cyclic carbonate groups containing poly(hydroxyethyl methacrylate-co-vinylene carbonate), p(HEMA-co-VC), microbeads was 27.8 mg g^-1, and the retained immobilized enzyme activity was 73% compared to free enzyme. The toxicity of the dye and its byproducts were studied using Daphnia magna as test organism. The micro-algal growth inhibition was also studied using a green micro algae "Chlorella vulgaris". MALDI-ToF-MS was used to verify dye degradation byproducts. After 60 min of incubation period, Cibacron Blue 3GA (CB3GA) and its byproducts disappeared from the medium. After 60-min enzymatic treatment, the non-toxic nature of medium was confirmed by toxicity studies. On the other hand, the initial byproducts of the dye seemed to be more toxic than the later formed dye products. It should be noted that the information obtained from this study can be beneficial for understanding the initial degradation byproducts toxicities of the enzymatically treated dyes to provide information about environmental protection.

Emergent contaminants: Endocrine disruptors and their laccase-assisted degradation - A review

Herein, an effort has been made to highlight the trends of the state-of-the-art of laccase-assisted degradation of emerging contaminants at large and endocrine disruptors in particular. Since first described in the 19th century, laccase has received particular interest for inter- and multidisciplinary investigations due to its uniqueness and remarkable biotechnological applicability. There has always been a paramount concern over the widespread occurrences of various pollutant types, around the globe. Therefore, pollution free processes are gaining ground all over the world. With ever increasing scientific knowledge, socioeconomic awareness, human health-related issues and ecological apprehensions, people are more concerned about the widespread environmental pollutants. In this context, the occurrences of newly identified pollutants so-called "emerging contaminants - ECs" in our main water bodies is of continued and burning concern worldwide. Undoubtedly, various efforts have already been made to tackle this challenging ECs concern though using different approaches including physical and chemical, however, each has considerable limitations. In this review, we present information on how laccase-assisted approach can change this limited tendency of physical and chemical based approaches. A special focus has been given to the laccase-assisted systems including pristine laccase, laccase-mediator catalyzed system and immobilized-laccase catalyzed system that promotes the endocrine disruptors removal. Towards the end, a list of outstanding questions and research gaps are given that can pave the way for future studies.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Enhanced sulfamethoxazole degradation in soil by immobilized sulfamethoxazole-degrading microbes on bagasse

The presence of sulfamethoxazole (SMX) in the environment is becoming a serious problem because of its toxicity and high risk to human health and microbial activity.

Bioinspired polymer vesicles and membranes for biological and medical applications

Biological membranes play an essential role in living organisms by providing stable and functional compartments, supporting signalling and selective transport. Combining synthetic polymer membranes with biological molecules promises to be an effective strategy to mimic the functions of cell membranes and apply them in artificial systems.

Laccase immobilization over multi-walled carbon nanotubes: Kinetic, thermodynamic and stability studies

The biocatalytic performance of immobilized enzyme systems depends mostly on the intrinsic properties of both biomolecule and support, immobilization technique and immobilization conditions. Multi-walled carbon nanotubes (MWCNTs) possess unique features for enzyme immobilization by adsorption. Enhanced catalytic activity and stability can be achieved by optimization of the immobilization conditions and by investigating the effect of operational parameters. Laccase was immobilized over MWCNTs by adsorption. The hybrid material was characterized by Fourier transformed infrared (FTIR) spectroscopy, scanning and transmission electron microscopy (SEM and TEM, respectively). The effect of different operational conditions (contact time, enzyme concentration and pH) on laccase immobilization was investigated. Optimized conditions were used for thermal stability, kinetic, and storage and operational stability studies. The optimal immobilization conditions for a laccase concentration of 3.75μL/mL were a pH of 9.0 and a contact time of 30min (522 Ulac/gcarrier). A decrease in the thermal stability of laccase was observed after immobilization. Changes in ΔS and ΔH of deactivation were found for the immobilized enzyme. The Michaelis-Menten kinetic constant was higher for laccase/MWCNT system than for free laccase. Immobilized laccase maintained (or even increased) its catalytic performance up to nine cycles of utilization and revealed long-term storage stability.

Applications of HRP-immobilized catalytic beads to the removal of 2,4-dichlorophenol from wastewater

Novel HRP-immobilized beads with the excellent catalytic activity were successfully fabricated to remove 2,4-dichlorophenol from wastewater.

Laccase immobilized on a PAN/adsorbents composite nanofibrous membrane for catechol treatment by a biocatalysis/adsorption process

The treatment of catechol via biocatalysis and adsorption with a commercial laccase immobilized on polyacrylonitrile/montmorillonite/graphene oxide (PAN/MMT/GO) composite nanofibers was evaluated with a homemade nanofibrous membrane reactor. The properties in this process of the immobilized laccase on PAN, PAN/MMT as well as PAN/MMT/GO with different weight ratios of MMT and GO were investigated. These membranes were successfully applied for removal of catechol from an aqueous solution. Scanning electron microscope images revealed different morphologies of the enzyme aggregates on different supports. After incorporation of MMT or MMT/GO, the optimum pH showed an alkaline shift to 4, compared to 3.5 for laccase immobilized on pure PAN nanofibers. The optimum temperature was at 55 °C for all the immobilized enzymes. Besides, the addition of GO improved the operational stability and storage stability. A 39% ± 2.23% chemical oxygen demand (COD) removal from the catechol aqueous solution was achieved. Experimental results suggested that laccase, PAN, adsorbent nanoparticles (MMT/GO) can be combined together for catechol treatment in industrial applications.

Immobilization of laccase by Cu(2+) chelate affinity interaction on surface-modified magnetic silica particles and its use for the removal of 2,4-dichlorophenol

Magnetic Cu(2+)-chelated silica particles that employ polyacrylamide as a metal-chelating ligand were developed and used to immobilize laccase by coordination. The particles were characterized by scanning electron microscope and Fourier transform infrared spectroscopy. The preparation, the enzymatic properties of the immobilized laccase, and its catalytic capacity for 2,4-dichlorophenol degradation were systemically evaluated. The results showed that immobilized laccase exhibited maximum enzyme activity when it was immobilized for 1 h at a pH of 4.0 and a temperature of 5 °C. The optimum laccase dose was 20 mg/g of carrier. In comparison to free laccase, the immobilized laccase had better acid adaptability and thermal stability. Higher activity was observed for immobilized laccase at a pH range of 2.0 to 3.5 and temperatures from 25 to 40 °C. The immobilized laccase that was prepared for this work exhibited a good catalytic capacity for removing 2,4-dichlorophnol from aqueous solutions.

Immobilization of tyrosinase on modified diatom biosilica: enzymatic removal of phenolic compounds from aqueous solution

Acid and plasma treated diatom-biosilica particles, were modified with 3-aminopropyl triethoxysilane (APTES), and activated with glutaraldehyde. Then, tyrosinase was immobilized onto the pre-activated biosilica by covalent bonding. The biosilica properties were determined using SEM, and FTIR. The enzyme system has been characterized as a function of pH, temperature and substrate concentration. Optimum pH of the free and immobilized enzyme was found to be pH 7.0. Optimum temperatures of the free and immobilized enzymes were determined as 35 and 45 °C respectively. The biodegradation of phenolic compounds (i.e., phenol, para-cresol and phenyl acetate) has been studied by means of immobilized tyrosinase in a batch system. The immobilized tyrosinase retained about 74% of its original activity after 10 times repeated use in the batch system. Moreover, the storage stability of the tyrosinase-biosilica system resulted excellent, since they maintained more than 67% of the initial activity after eighth week storage. Highly porous structure of biosilica can provide large surface area for immobilization of high quantity enzyme. The porous structure of the biosilica can decrease diffusion limitation both substrate phenols and their products. Finally, the immobilized tyrosinase was used in a batch system for degradation of three different phenols.