Characterization of gold nanoparticle binding to microtubule filaments

Antiproliferative efficacy and mechanism of action of garlic phytochemicals-functionalized gold nanoparticles in triple-negative breast cancer cells

Fabrication of gold nanoparticles (GNPs) with phytochemicals is an emerging green nanotechnology approach with therapeutic implications. Garlic, known for its culinary and medicinal properties, has been extensively investigated for its anticancer properties. Here, we report a method to substantially enhance the antiproliferative potency of garlic by functionalizing its phytochemicals to GNPs and demonstrate a possible mechanism of action of these nanoparticles in the triple-negative breast cancer cell line, MDA-MB-231. Garlic gold nanoparticles (As-GNPs) were synthesized using garlic extract (As-EX) and gold chloride and characterized using a variety of spectroscopy techniques, and transmission electron microscopy (TEM). Compared to As-EX, which has a negligible effect on the viability of the cells, As-GNPs inhibited cell viability with an IC50of 0.310 ± 0.04 mg ml-1and strongly inhibited the clonogenic and migratory propensities of these cells. As indicated by TEM, the As-GNPs entered the cells via endocytosis and dispersed in the cellular milieu. Since tubulin, the protein involved in cell division, is a verified target for several antiproliferative drugs, we next examined whether the As-GNPs interact with this protein. The As-GNPs showed concentration-dependent binding to purified tubulin, slightly but consistently perturbing its secondary helical integritywithout grossly damaging the tertiary structure of the protein or the net polymer mass of the microtubules, as indicated by a tryptophan-quenching assay, far UV-circular dichroism spectroscopy, anilinonaphthalene sulfonate-binding assay, and polymer mass analysis, respectively. In cells, As-GNPs killed the cancer cells without cell cycle arrest, as evidenced by flow cytometry.

Solid-State Single-Molecule Sensing with the Electronic Life-Detection Instrument for Enceladus/Europa (ELIE)

Growing evidence of the potential habitability of Ocean Worlds across our solar system is motivating the advancement of technologies capable of detecting life as we know it-sharing a common ancestry or physicochemical origin with life on Earth-or don't know it, representing a distinct emergence of life different than our one known example. Here, we propose the Electronic Life-detection Instrument for Enceladus/Europa (ELIE), a solid-state single-molecule instrument payload that aims to search for life based on the detection of amino acids and informational polymers (IPs) at the parts per billion to trillion level. As a first proof-of-principle in a laboratory environment, we demonstrate the single-molecule detection of the amino acid L-proline at a 10 μM concentration in a compact system. Based on ELIE's solid-state quantum electronic tunneling sensing mechanism, we further propose the quantum property of the HOMO-LUMO gap (energy difference between a molecule's highest energy-occupied molecular orbital and lowest energy-unoccupied molecular orbital) as a novel metric to assess amino acid complexity. Finally, we assess the potential of ELIE to discriminate between abiotically and biotically derived α-amino acid abundance distributions to reduce the false positive risk for life detection. Nanogap technology can also be applied to the detection of nucleobases and short sequences of IPs such as, but not limited to, RNA and DNA. Future missions may utilize ELIE to target preserved biosignatures on the surface of Mars, extant life in its deep subsurface, or life or its biosignatures in a plume, surface, or subsurface of ice moons such as Enceladus or Europa. One-Sentence Summary: A solid-state nanogap can determine the abundance distribution of amino acids, detect nucleic acids, and shows potential for detecting life as we know it and life as we don't know it.

An overview on the exploring the interaction of inorganic nanoparticles with microtubules for the advancement of cancer therapeutics

Targeting microtubules (MTs), dynamic and stable proteins in cells, by different ligands have been reported to be a potential strategy to combat cancer cells. Inorganic nanoparticles (NPs) have been widely used as anticancer, antibacterial, and free radical scavenging agents, where the come in contact with biological macromolecules. The interaction between the NPs and biological macromolecules like MTs frequently occurs through different mechanisms. A prerequisite for a detailed exploration of MT structures and functions for biomedical applications like cancer therapy is to investigate profoundly the mechanisms involved in MT-NP interactions, for which the full explanation and characterization of the parameters that are responsible for the formation of a NP-protein complex are crucial. Therefore, in view of the fact that the goal of the rational NP-based future drug design and new therapies is to rely on the information of the structural details and protein-NPs binding mechanisms to manipulate the process of developing new potential drugs, a comprehensive investigation of the essence of the molecular recognition/interaction is also of considerable importance. In the present review, first, the microtubule (MT) structure and its binding sites upon interaction with MT stabilizing agents (MSAs) and MT destabilizing agents (MDAs) are introduced and rationalized. Next, MT targeting in cancer therapy and interaction of NPs with MTs are discussed. Furthermore, interaction of NPs with proteins and the manipulation of protein corona (PC), experimental techniques, and direct interaction of NPs with MTs, are discussed, and finally the challenges and future perspective of the field are introduced. We envision this review can provide useful information on the manipulation of the MT lattice for the progress of cancer nanomedicine.

Fabrication of High Aspect Ratio Gold Nanowires within the Microtubule Lumen

Gold nanowires have great potential use as interconnects in electronic, photonic, and optoelectronic devices. To date, there are various fabrication strategies for gold nanowires, each one associated with particular drawbacks as they utilize high temperatures, toxic chemicals, or expensive compounds to produce nanowires of suboptimal quality. Inspired by nanowire fabrication strategies that used higher-order biopolymer structures as molds for electroless deposition of gold, we here report a strategy for the growth of gold nanowires from seed nanoparticles within the lumen of microtubules. Luminal targeting of seed particles occurs through covalently linked Fab fragments of an antibody recognizing the acetylated lysine 40 on the luminal side of α-tubulin. Gold nanowires grown by electroless deposition within the microtubule lumen exhibit a homogeneous morphology and high aspect ratios with a mean diameter of 20 nm. Our approach is fast, simple, and inexpensive and does not require toxic chemicals or other harsh conditions.

Electrical Propagation of Condensed and Diffuse Ions Along Actin Filaments

In this article, we elucidate the roles of divalent ion condensation and highly polarized immobile water molecules on the propagation of ionic calcium waves along actin filaments. We introduced a novel electrical triple layer model and used a non-linear Debye-Huckel theory with a non-linear, dissipative, electrical transmission line model to characterize the physicochemical properties of each monomer in the filament. This characterization is carried out in terms of an electric circuit model containing monomeric flow resistances and ionic capacitances in both the condensed and diffuse layers. We considered resting and excited states of a neuron using representative mono and divalent electrolyte mixtures. Additionally, we used 0.05V and 0.15V voltage inputs to study ionic waves along actin filaments in voltage clamp experiments. Our results reveal that the physicochemical properties characterizing the condensed and diffuse layers lead to different electrical conductive mediums depending on the ionic species and the neuron state. This region specific propagation mechanism provides a more realistic avenue of delivery by way of cytoskeleton filaments for larger charged cationic species. A new direct path for transporting divalent ions might be crucial for many electrical processes found in localized neuron elements such as at mitochondria and dendritic spines.

Bio-Templating: An Emerging Synthetic Technique for Catalysts. A Review

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis.

Inhibition of microtubule assembly and cytotoxic effect of graphene oxide on human colorectal carcinoma cell HCT116

Nanomaterials, such as graphene oxide (GO), are increasingly being investigated for their suitability in biomedical applications. Tubulin is the key molecule for the formation of microtubules crucial for cellular function and proliferation, and as such an appealing target for developing anticancer drug. Here we employ biophysical techniques to study the effect of GO on tubulin structure and how the changes affect the tubulin/microtubule assembly. GO disrupts the structural integrity of the protein, with consequent retardation of tubulin polymerization. Investigating the anticancer potential of GO, we found that it is more toxic to human colon cancer cells (HCT116), as compared to human embryonic kidney epithelial cells (HEK293). Immunocytochemistry indicated the disruption of microtubule assembly in HCT116 cells. GO arrested cells in the S phase with increased accumulation in Sub-G1 population of cell cycle, inducing apoptosis by generating reactive oxygen species (ROS) in a dose- and time-dependent manner. GO inhibited microtubule formation by intervening into the polymerization of tubulin heterodimers both in vitro and ex vivo, resulting in growth arrest at the S phase and ROS induced apoptosis of HCT116 colorectal carcinoma cells. There was no significant harm to the HEK293 kidney epithelial cells used as control. Our report of pristine GO causing ROS-induced apoptosis of cancer cells and inhibition of tubulin-microtubule assembly can be of interest in cancer therapeutics and nanomedicine.

Polycationic gold nanorods as multipurpose in vitro microtubule markers

Gold nanoparticles are intriguing because of their unique size- and shape-dependent chemical, electronic and optical properties. Gold nanorods (AuNRs) are particularly promising for various sensor applications due to their tip-enhanced plasmonic fields. For biomolecule attachment, AuNRs are often functionalized with proteins. However, by their intrinsic size such molecules block the most sensitive near-field region of the AuNRs. Here, we used short cationic thiols to functionalize AuNRs. We show that the functionalization layer is thin and that these polycationic AuNRs bind in vitro to negatively charged microtubules. Furthermore, we can plasmonically stimulate light emission from single AuNRs in the absence of any fluorophores and, therefore, use them as bleach- and blinkfree microtubule markers. We expect that polycationic AuNRs may be applicable to in vivo systems and other negatively charged molecules like DNA. In the long-term, microtubule-bound AuNRs can be used as ultrasensitive single-molecule sensors for molecular machines that interact with microtubules.

Microtubule network as a potential candidate for targeting by gold nanoparticle-assisted photothermal therapy

Photothermal therapy is achieving ever-increasing attention as a promising method for killing cancer cells. Although, gold nanoparticles are regarded as one of the most effective photothermal therapy agents, the mechanisms underlying their action have to be addressed. Moreover, studies have showed that gold nanoparticles induce apoptosis in treated cultures. Hence, in this study, we investigated the interaction of folic acid functionalized gold nanoparticles and gold-shelled Fe₃O₄ nanoparticles with microtubule and microtubule associated protein tau in order to introduce intracellular targets of these nanoparticles and provide a holistic view about the mechanism of action of gold nanoparticles used in photothermal therapy. Various spectroscopic methods were used to find gold nanoparticles interaction with Tubulin and Tau. Our results indicated that these gold nanoparticles interact with both Tau and Tubulin and their affinity increases as temperature rises. Also, the results illustrated that quenching mechanism for gold nanoparticles interaction with Tubulin and Tau was static. The hydrophobic interaction was determined as driving force for gold nanoparticles binding to Tubulin and Tau. Moreover, it was showed that both type of gold nanoparticles stabilize microtubule polymers. These results suggest Tau and Tubulin as intracellular target of gold nanoparticles and propose that microtubule network is at the heart of apoptosis mechanisms initiated by photothermal therapy.

Organic molecular passivation of phosphorene: An aptamer-based biosensing platform

Black phosphorus (BP), also known as phosphorene (PP), is a fascinating two-dimensional (2D) material with extraordinary anisotropic mechanical, electronic and optoelectronic properties. However, PP is sensitive to oxygen and moisture and is completely degenerated by oxygen and humid air within 12 h, which limits its applications. Here, we coat PP with hexamethylenediamine (HMA), which allows the coated PP to maintain its original form in aqueous solution for over one month. The stable PP is dotted with gold nanoparticles to facilitate binding to a 3,3'4,4'-polychlorinated biphenyl (PCB77) aptamer (ap) as a biosensor. The aptamer biosensor based on gold nanoparticle-dotted PP nanocomposites (PP-AuNPs) exhibits superior analytical performance, and its sensitivity (391.1 μA cm^-2) is approximately three times higher than that of an AuNP-based sensor (AuNP-Ap/Au electrode, 147.2 μA cm^-2). This biosensor has a low detection limit (DL) of 33 pg L^-1 toward PCB77 with a dynamic response range toward PCB77 from 100 pg L^-1 to 10 μg L^-1. This research opens up avenues for the use of PP to make multiplexed diagnosis platforms in aqueous systems.

Synthesis of Au Nanoparticles with Benzoic Acid as Reductant and Surface Stabilizer Promoted Solely by UV Light

Photoreductive synthesis of colloidal gold nanoparticles (AuNPs) from Au³⁺ is one important process for nanoprocessing. Several methods have been proposed; however, there is no report of a method capable of producing AuNPs with inexpensive reagents acting as both reductant and surface stabilizer, promoted solely under photoirradiation. We found that UV irradiation of water with Au³⁺ and benzoic acid successfully produces monodispersed AuNPs, where thermal reduction does not occur in the dark condition even at elevated temperatures. Photoexcitation of a benzoate-Au³⁺ complex reduces Au³⁺ while oxidizing benzoic acid. The benzoic acid molecules are adsorbed on the AuNPs and act as surface stabilizers. Change in light intensity and benzoic acid amount successfully creates AuNPs with controllable sizes. The obtained AuNPs can easily be redispersed in an organic solvent or loaded onto a solid support by simple treatments.

Room-Temperature Wet Chemical Synthesis of Au NPs/TiH2/Nanocarved Ti Self-Supported Electrocatalysts for Highly Efficient H2 Generation

Self-supported electrocatalysts are a new class of materials exhibiting high catalytic performance for various electrochemical processes and can be directly equipped in energy conversion devices. We present here, for the first time, sparse Au NPs self-supported on etched Ti (nanocarved Ti substrate self-supported with TiH₂) as promising catalysts for the electrochemical generation of hydrogen (H₂) in KOH solutions. Cleaned, as-polished Ti substrates were etched in highly concentrated sulfuric acid solutions without and with 0.1 M NH₄F at room temperature for 15 min. These two etching processes yielded a thin layer of TiH₂ (the corrosion product of the etching process) self-supported on nanocarved Ti substrates with different morphologies. While F^--free etching process led to formation of parallel channels (average width: 200 nm), where each channel consists of an array of rounded cavities (average width: 150 nm), etching in the presence of F^- yielded Ti surface carved with nanogrooves (average width: 100 nm) in parallel orientation. Au NPs were then grown in situ (self-supported) on such etched surfaces via immersion in a standard gold solution at room temperature without using stabilizers or reducing agents, producing Au NPs/TiH₂/nanostructured Ti catalysts. These materials were characterized by scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS), grazing incidence X-ray diffraction (GIXRD), and X-ray photoelectron spectroscopy (XPS). GIXRD confirmed the formation of Au₂Ti phase, thus referring to strong chemical interaction between the supported Au NPs and the substrate surface (also evidenced from XPS) as well as a titanium hydride phase of chemical composition TiH₂. Electrochemical measurements in 0.1 M KOH solution revealed outstanding hydrogen evolution reaction (HER) electrocatalytic activity for our synthesized catalysts, with Au NPs/TiH₂/nanogrooved Ti catalyst being the best one among them. It exhibited fast kinetics for the HER with onset potentials as low as -22 mV vs. RHE, high exchange current density of 0.7 mA cm^-2, and a Tafel slope of 113 mV dec^-1. These HER electrochemical kinetic parameters are very close to those measured here for a commercial Pt/C catalyst (onset potential: -20 mV, Tafel slope: 110 mV dec^-1, and exchange current density: 0.75 mA cm^-2). The high catalytic activity of these materials was attributed to the catalytic impacts of both TiH₂ phase and self-supported Au NPs (active sites for the catalytic reduction of water to H₂), in addition to their nanostructured features which provide a large-surface area for the HER.

Biomimetic and Bioinspired Synthesis of Nanomaterials/Nanostructures

In recent years, due to its unparalleled advantages, the biomimetic and bioinspired synthesis of nanomaterials/nanostructures has drawn increasing interest and attention. Generally, biomimetic synthesis can be conducted either by mimicking the functions of natural materials/structures or by mimicking the biological processes that organisms employ to produce substances or materials. Biomimetic synthesis is therefore divided here into "functional biomimetic synthesis" and "process biomimetic synthesis". Process biomimetic synthesis is the focus of this review. First, the above two terms are defined and their relationship is discussed. Next different levels of biological processes that can be used for process biomimetic synthesis are compiled. Then the current progress of process biomimetic synthesis is systematically summarized and reviewed from the following five perspectives: i) elementary biomimetic system via biomass templates, ii) high-level biomimetic system via soft/hard-combined films, iii) intelligent biomimetic systems via liquid membranes, iv) living-organism biomimetic systems, and v) macromolecular bioinspired systems. Moreover, for these five biomimetic systems, the synthesis procedures, basic principles, and relationships are discussed, and the challenges that are encountered and directions for further development are considered.

Gold-Coated M13 Bacteriophage as a Template for Glucose Oxidase Biofuel Cells with Direct Electron Transfer

Glucose oxidase-based biofuel cells are a promising source of alternative energy for small device applications, but still face the challenge of achieving robust electrical contact between the redox enzymes and the current collector. This paper reports on the design of an electrode consisting of glucose oxidase covalently attached to gold nanoparticles that are assembled onto a genetically engineered M13 bacteriophage using EDC-NHS chemistry. The engineered phage is modified at the pIII protein to attach onto a gold substrate and serves as a high-surface-area template. The resulting "nanomesh" architecture exhibits direct electron transfer (DET) and achieves a higher peak current per unit area of 1.2 mA/cm(2) compared to most other DET attachment schemes. The final enzyme surface coverage on the electrode was calculated to be approximately 4.74 × 10(-8) mol/cm(2), which is a significant improvement over most current glucose oxidase (GOx) DET attachment methods.

Thermodynamic and conformational changes of protein toward interaction with nanoparticles: a spectroscopic overview

Nanoparticles (NPs) in different forms have been widely used in medicine and pharmaceutics for diagnosis and drug delivery.

Electrokinetic preconcentration of small molecules within volumetric electromagnetic hotspots in surface enhanced Raman scattering

The on-chip integration of a preconcentration chamber for ultrasensitive surface-enhanced Raman scattering (SERS) is shown. Small molecules are preconcentrated using 3D volumetric electromagnetic hotspots. The experimental results demonstrate an enhancement of the SERS signals of over two orders of magnitude, which allows the fingerprinting of neurotransmitter molecules at the nanomolar level and furthers the selective detection of oppositely charged molecules. This on-chip integration will provide new directions for ultrasensitive SERS applications.

Unraveling the biomolecular snapshots of mitosis in healthy and cancer cells using plasmonically-enhanced Raman spectroscopy

Owing to the dynamic and complex nature of mitosis, precise and timely executions of biomolecular events are critical for high fidelity cell division. In this context, visualization of such complex events at the molecular level can provide vital information on the biomolecular processes in abnormal cells. Here, we explored the plasmonically enhanced light scattering properties of functionalized gold nanocubes (AuNCs) together with surface-enhanced Raman spectroscopy (SERS) to unravel the complex and dynamic biological processes involved in mitosis of healthy and cancerous cells from its molecular perspectives. By monitoring various stages of mitosis using SERS, we noticed that relatively high rate of conversion of mitotic proteins from their α-helix structure to β-sheet conformation is likely in the cancer cells during meta-, ana-, and telophases. Unique biochemical modifications to the lipid and amino acid moieties, associated with the observed protein conformational modifications, were also identified. However, in healthy cells, the existence of proteins in their β conformation was momentary and was largely in the α-helix form. The role of abnormal conformational modifications of mitotic proteins on the development of anomalous mitotic activities was further confirmed by looking at plasmonic nanoparticle-induced cytokinesis failure in cancer cells. Our findings illustrate the vast possibilities of SERS in real-time tracking of complex, subtle, and momentary modifications of biomolecules in live cells, which could provide new insights to the role of protein conformation dynamics during mitosis on the development of cancer and many other diseases.

Characterization of conductive nanobiomaterials derived from viral assemblies by low-voltage STEM imaging and Raman scattering

New technologies require the development of novel nanomaterials that need to be fully characterized to achieve their potential. High-resolution low-voltage scanning transmission electron microscopy (STEM) has proven to be a very powerful technique in nanotechnology, but its use for the characterization of nanobiomaterials has been limited. Rotavirus VP6 self-assembles into nanotubular assemblies that possess an intrinsic affinity for Au ions. This property was exploited to produce hybrid nanobiomaterials by the in situ functionalization of recombinant VP6 nanotubes with gold nanoparticles. In this work, Raman spectroscopy and advanced analytical electron microscopy imaging with spherical aberration-corrected (Cs) STEM and nanodiffraction at low-voltage doses were employed to characterize nanobiomaterials. STEM imaging revealed the precise structure and arrangement of the protein templates, as well as the nanostructure and atomic arrangement of gold nanoparticles with high spatial sub-Angstrom resolution and avoided radiation damage. The imaging was coupled with backscattered electron imaging, ultra-high resolution scanning electron microscopy and x-ray spectroscopy. The hybrid nanobiomaterials that were obtained showed unique properties as bioelectronic conductive devices and showed enhanced Raman scattering by their precise arrangement into superlattices, displaying the utility of viral assemblies as functional integrative self-assembled nanomaterials for novel applications.

Gold nanoparticle conjugated PLGA-PEG-SA-PEG-PLGA multiblock copolymer nanoparticles: synthesis, characterization, in vivo release of rifampicin

A series of succinate linearly linked PLGA-PEG-SA-PEG-PLGA multiblock copolymers were synthesized using direct melt polycondensation and characterized using inherent viscosity, gel permeation chromatography (GPC), FTIR and ¹H-NMR spectroscopy techniques. Gold nanoparticles (AuNPs) were synthesized using an as-synthesized citrate-PEG (CPEG) hybrid dendron, which acts as a reducing agent as well as a stabilizing agent. The CPEG capped AuNPs were characterized using UV-visible spectroscopy and TEM analysis. The Au-conjugated PLGA-PEG-SA-PEG-PLGA multiblock copolymer NPs were loaded with the tuberculosis drug rifampicin (RIF) using ultrasonication followed by solvent evaporation and were characterized by TEM, powder XRD and XPS analyses. The RIF loading efficiency and percentage drug content of RIF loaded Au-conjugated multiblock copolymer NPs were evaluated using UV-visible spectroscopy. The RIF loading efficiency and RIF content of the AuNP conjugated multiblock copolymer NPs were 41.8-75.7% and 11.5-17.7% respectively. The in vivo drug release studies in male Wistar rats show that AuNP conjugated multiblock copolymer NPs exhibit drug release up to 240 h. The nanoconjugates exhibit 18.13-29.41 μg mL^-1 of C_max with a delayed T_max of 72 h and the relative bioavailability is increased to 107-190.

Small molecule- and amino acid-induced aggregation of gold nanoparticles

To understand which organic molecules are capable of binding to gold nanoparticles and/or inducing nanoparticle aggregation, we investigate the interaction of gold nanoparticles with small molecules and amino acids at variable pH. Dynamic Light Scattering (DLS) and ultraviolet-visible (UV-vis) spectra were measured on mixtures of colloidal gold with small molecules to track the progression of the aggregation of gold nanoparticles. We introduce the 522 to 435 nm UV-vis absorbance ratio as a sensitive method for the detection of colloidal gold aggregation, whereby we delineate the ability of thiol, amine, and carboxylic acid functional groups to bind to the surfaces of gold nanoparticles and investigate how combinations of these functional groups affect colloidal stability. We present models for mechanisms of aggregation of colloidal gold, including surface charge reduction and bridging linkers. For all molecules whose addition leads to the aggregation of gold nanoparticles, the aggregation kinetics were accelerated at acidic pH values. Colloidal gold is maintained only in the presence of anionic carboxyl groups, which are neutralized by protonation at lower pH. The overall reduced charge on the stabilizing carboxyl groups accounts for the accelerated aggregation at lower pH values.

Unprecedented inhibition of tubulin polymerization directed by gold nanoparticles inducing cell cycle arrest and apoptosis

The effect of gold nanoparticles (AuNPs) on the polymerization of tubulin has not been examined till now. We report that interaction of weakly protected AuNPs with microtubules (MTs) could cause inhibition of polymerization and aggregation in the cell free system. We estimate that single citrate capped AuNPs could cause aggregation of ∼10(5) tubulin heterodimers. Investigation of the nature of inhibition of polymerization and aggregation by Raman and Fourier transform-infrared (FTIR) spectroscopies indicated partial conformational changes of tubulin and microtubules, thus revealing that AuNP-induced conformational change is the driving force behind the observed phenomenon. Cell culture experiments were carried out to check whether this can happen inside a cell. Dark field microscopy (DFM) combined with hyperspectral imaging (HSI) along with flow cytometric (FC) and confocal laser scanning microscopic (CLSM) analyses suggested that AuNPs entered the cell, caused aggregation of the MTs of A549 cells, leading to cell cycle arrest at the G0/G1 phase and concomitant apoptosis. Further, Western blot analysis indicated the upregulation of mitochondrial apoptosis proteins such as Bax and p53, down regulation of Bcl-2 and cleavage of poly(ADP-ribose) polymerase (PARP) confirming mitochondrial apoptosis. Western blot run after cold-depolymerization revealed an increase in the aggregated insoluble intracellular tubulin while the control and actin did not aggregate, suggesting microtubule damage induced cell cycle arrest and apoptosis. The observed polymerization inhibition and cytotoxic effects were dependent on the size and concentration of the AuNPs used and also on the incubation time. As microtubules are important cellular structures and target for anti-cancer drugs, this first observation of nanoparticles-induced protein's conformational change-based aggregation of the tubulin-MT system is of high importance, and would be useful in the understanding of cancer therapeutics and safety of nanomaterials.

Insights into biogenic and chemical production of inorganic nanomaterials and nanostructures

The synthesis of inorganic nanomaterials and nanostructures by the means of diverse physical, chemical, and biological principles has been developed in recent decades. The nanoscale materials and structures creation continue to be an active area of researches due to the exciting properties of the resulting nanomaterials and their innovative applications. Despite physical and chemical approaches which have been used for a long time to produce nanomaterials, biological resources as green candidates that can replace old production methods have been focused in recent years to generate various inorganic nanoparticles (NPs) or other nanoscale structures. Cost-effective, eco-friendly, energy efficient, and nontoxic produced nanomaterials using diverse biological entities have been received increasing attention in the last two decades in contrast to physical and chemical methods owe using toxic solvents, generate unwanted by-products, and high energy consumption which restrict the popularity of these ways employed in nanometric science and engineering. In this review, the biosynthesis of gold, silver, gold-silver alloy, magnetic, semiconductor nanocrystals, silica, zirconia, titania, palladium, bismuth, selenium, antimony sulfide, and platinum NPs, using bacteria, actinomycetes, fungi, yeasts, plant extracts and also informational bio-macromolecules including proteins, polypeptides, DNA, and RNA have been reported extensively to mention the current status of the biological inorganic nanomaterial production. In other hand, two well-known wet chemical techniques, namely chemical reduction and sol-gel methods, used to produce various types of nanocrystalline powders, metal oxides, and hybrid organic-inorganic nanomaterials have presented.

Proteins and peptides as biological nanowires: towards biosensing devices

The current landscape of nanotechnology is such that attention is being given to those materials that self-assemble, as a mode of "bottom-up" fabrication of nanomaterials. The field of nanotubes and nanowires has long been dominated by carbon nanotubes and inorganic materials. However in more recent years, the search for materials with desirable properties, such as self-assembly, has unsurprisingly led to the biological world, where functional nanoscale biomolecular assemblies are in abundance.Potential has been seen for a number of these assemblies to be translated into functional nanomaterials. The early days of bionanotechnology saw a lot of attention given to DNA molecules as nanowires, and proteins and peptides have now also been seen to have promise in this area. With most of the biological structures investigated having low conductivity in the native state, the use of biomolecules as templates for the formation of metallic and semiconductor nanowires has been the direction taken.This chapter will discuss the use of various biomolecules and biomolecular assemblies as nanowires, with a particular emphasis on proteins, beginning with an introduction into the field of nanotubes and nanowires. Many applications are now recognized for nanowires, but for brevity, this chapter will focus solely on their use as biosensors, using glucose sensors as a case study.

In vitro polymerization of microtubules with a fullerene derivative

Fullerene derivative C(60)(OH)(20) inhibited microtubule polymerization at low micromolar concentrations. The inhibition was mainly attributed to the formation of hydrogen bonding between the nanoparticle and the tubulin heterodimer, the building block of the microtubule, as evidenced by docking and molecular dynamics simulations. Our circular dichroism spectroscopy measurement indicated changes in the tubulin secondary structures, while our guanosine-5'-triphosphate hydrolysis assay showed hindered release of inorganic phosphate by the nanoparticle. Isothermal titration calorimetry revealed that C(60)(OH)(20) binds to tubulin at a molar ratio of 9:1 and with a binding constant of 1.3 ± 0.16 × 10(6) M(-1), which was substantiated by the binding site and binding energy analysis using docking and molecular dynamics simulations. Our simulations further suggested that occupancy by the nanoparticles at the longitudinal contacts between tubulin dimers within a protofilament or at the lateral contacts of the M-loop and H5 and H12 helices of neighboring tubulins could also influence the polymerization process. This study offered a new molecular-level insight on how nanoparticles may reshape the assembly of cytoskeletal proteins, a topic of essential importance for illuminating cell response to engineered nanoparticles and for the advancement of nanomedicine.

Ultra-small TiO(2) nanoparticles disrupt microtubular networks in Arabidopsis thaliana

In spite of the mounting concerns, current understanding of the extent and mechanisms of phytotoxicity of manufactured nanomaterials remains limited. Here we show that in Arabidopsis thaliana, ultra-small anatase TiO(2) nanoparticles cause reorganization and elimination of microtubules followed by the accelerated and 26S proteasome-dependent degradation of tubulin monomers. Similar to other microtubule-disrupting agents, TiO(2) nanoparticles induce isotropic growth of root cells. Because microtubules are essential for the normal function of all eukaryotic cells, these results reveal a potentially important consequence of environmental pollution by this widely used nanomaterial.

Induction of chromosome malsegregation by nanomaterials

NMs (nanomaterials), defined as materials with at least one dimension smaller than 100 nm, are able to induce genotoxic effects. One of the hypotheses of the mode-of-action in which they exert their genotoxic potential is to mechanically interfere with subcellular structures, in particular the microtubules. In the present paper, we review studies exploring interactions between NMs and tubulin; therefore a PubMed literature search was performed. From this search 12 studies, applying both acellular and cellular assays, were retrieved and are summarized according to endpoint and particle type. These studies show that there are interactions between different types of NMs and tubulins in both acellular and cellular systems. For several types of NMs, the multi-walled carbon nanotubes, amorphous SiO(2), TiO(2) and CoCr, an induction of aneuploidy was observed in vitro. There is, therefore, a critical need to assess the capacity of NMs to interfere with the cytoskeleton, and in particular the tubulins. This might require definition of relevant dosimetry, adaptations of some testing protocols, possibly development of new methodologies and studies on a larger size-range of NMs.

Green synthesis and stabilization of gold nanoparticles in chemically modified chitosan matrices

Chitosan-N-2-methylhydroxypyridine-6-methylcorboxylate (Ch-PDC) and chitosan-N-2-methylhydroxypyridine-6-methylhydroxy thiocarbohydrazide (Ch-PDC-Th) were synthesized for the first time using chitosan as precursor. Chitosan, Ch-PDC, Ch-PDC-Th were used in the synthesis of gold nanoparticles (AuNP) in aqueous medium. Chitosan and Ch-PDC-Th possess reducing properties which enabled the 'green' synthesis of AuNPs. The stabilization of the AuNPs was as a result of the thiocarbide (SC) and amine (NH(2)) groups in the chitosan matrix. The modified chitosan, its derivatives and the resulting AuNPs were characterized by Fourier transform infrared (FTIR) spectroscopy, Ultraviolet-visible (UV-vis) spectroscopy, Raman scattering measurements, powder X-ray diffraction (PXRD) and thermo gravimetric analysis (TGA). Particle size, morphology, segregation and individuality of the AuNPs were examined by transmission electron microscope (TEM) and energy dispersion spectroscopy (EDS). An average AuNPs size of 20 nm was observed for chitosan and Ch-PDC-Th while Ch-PDC was 50 nm. In comparison, AuNPs resulting from Ch-PDC-Th precursor has the most enhanced Raman and fluorescent intensities and was stable for over 2 months.

Nanomaterials and the environment: a review for the biennium 2008-2010

Applications of nanotechnology are touching almost every aspect of modern life. The increased use of engineered nanomaterials (ENMs) in consumer products, chemical and medical equipment, information technology, and energy, among others, has increased the number of publications (informative and scientific) on ENMs. By the 1950s, very few papers were committed to nanomaterials (NMs), but in 2009, more than 80,000 journal articles included the concept nanotechnology. The objective of this review is to compile and analyze publications on NMs in the biennium 2008-2010. This review includes the most recent publications in risk assessment/toxicity, characterization and stability, toxicity, fate and transport of NMs in terrestrial ecosystems, and new ENMs. Carbon nanotubes, metallic, metal oxides and hydroxides nanoparticles, quantum dots, and polystyrene NPs are included.

Insulin amyloid superstructures as templates for surface enhanced Raman scattering

Nanostructuring of noble metal surfaces with biomorphic and biological templates facilitates a variety of applications of surface enhanced Raman scattering (SERS). Here we show that the newly reported insulin amyloid superstructures may be employed as stable nanoscaffolds for metallic Au films providing an effective substrate for SERS on covalently bound molecules of 4-mercaptobenzoic acid (4-MBA). The vortex-aligned insulin fibrils are capable of templating nanopatterns in sputtered Au layers without overlapping the SERS spectra of 4-MBA with vibrational bands stemming from the protein. This holds true regardless of whether the incident laser beam is directly backscattered from the 4-MBA layer, or after passage through the insulin amyloid layer.