Preparation, characterization and release of amoxicillin from cellulose acetate and poly(vinyl pyrrolidone) coaxial electrospun fibrous membranes

Recent trends in diabetic wound healing with nanofibrous scaffolds

There is an emphasis in this review on nanofibrous scaffolds (NFSs) in diabetic wound healing, as well as their mechanisms and recent advancements. Diabetes-related complex wounds pose an important problem to humanity, due to the fact that their chronic nature can lead to serious complications including sepsis and amputations. Despite the fact that there are certain therapy options available for diabetic wound healing, these options are either ineffective or intrusive, making clinical intervention difficult. Clinical research is also challenged by the emergence of bacterial resistance to standard antibiotics. However, research into nanotechnology, in particular NFSs, is growing swiftly and has a positive impact on the treatment of diabetic wounds. For instance, SpinCare™, developed by Nanomedic Technologies Ltd, has successfully finished clinical testing and can re-epithelialize second-degree burns and chronic diabetic wounds in 7 and 14 days, respectively. In this review, we discussed homologous studies as well as other recent research studies on diabetic wound healing using NFSs.

Mimicking natural electrical environment with cellulose acetate scaffolds enhances collagen formation of osteoblasts

The medical field is continuously seeking new solutions and materials, where cellulose materials due to their high biocompatibility have great potential. Here we investigate the applicability of cellulose acetate (CA) electrospun fibers for bone tissue regeneration. For the first time we show the piezoelectric properties of electrospun CA fibers via high voltage switching spectroscopy piezoresponse force microscopy (HVSS-PFM) tests, which are followed by surface potential studies using Kelvin probe force microscopy (KPFM) and zeta potential measurements. Piezoelectric coefficient for CA fibers of 6.68 ± 1.70 pmV^-1 along with high surface (718 mV) and zeta (-12.2 mV) potentials allowed us to mimic natural electrical environment favoring bone cell attachment and growth. Importantly, the synergy between increased surface potential and highly developed structure of the fibrous scaffold led to the formation of a vast 3D network of collagen produced by osteoblasts only after 7 days of in vitro culture. We clearly show the advantages of CA scaffolds as a bone replacement material, when long-lasting structural support is needed.

Microbiological, thermal and mechanical performance of cellulose acetate films with geranyl acetate

The present work concerns to investigate the microbiological, thermal and mechanical behavior of cellulose acetate films obtained with addition of 0.5 % (v/v) and 1.0 % (v/v) of geranyl acetate by the casting technique. The antimicrobial activities of the polymeric films were assessed against Staphylococcus aureus and Escherichia coli bacteria and against Aspergillus flavus fungal. The achieved results show that the films presented antibacterial and antifungal activities. Moreover, the incorporation of the geranyl acetate in the polymeric films was confirmed by FTIR and TGA technique, while DSC analysis pointed out the compatibility between the geranyl acetate and cellulose acetate. The addition of the geranyl acetate did not modify the mechanical behavior of the cellulose acetate films concerning stiffness and tensile strength. These results suggest that this new material is promising for future applications in biomedical devices and food packaging.

Culture and maintenance of neural progressive cells on cellulose acetate/graphene‑gold nanocomposites

In this study, the first CA nanofibers were fabricated by electrospinning under optimal conditions: flow rate of 0.5 ml/h, a voltage of 20 kV, electrospinning distance of 15 cm, and an internal temperature of 25 °C, and humidity of 38%. The used Graphene/gold nanoparticles for CA performance improvement were examined by TGA, XRD, and SEM analysis. Then the CA/graphene‑gold nanocomposite was synthesized under optimum electrospinning conditions: flow rate 3 ml/h, voltage 20 kV, electrospinning distance 15 cm, internal temperature 26 °C, and humidity 36%. The SEM images revealed that the nanofibers' thicknesses of Graphene‑gold NPs (CA₁) and Chitosan (CA₂) were 350 and 120 nm, respectively. The XRD diagrams of CA₀, CA₁ and CA₂ revealed the peaks at 2θ, 8°, and 21° with Miller indices of (001) and (110) are related to CA (CA₀), which proves its presence in other scaffolds. The FTIR analysis of samples indicated the presence of graphene‑gold NPs in scaffolding CA₁ and CA₂. The CA₂ nanofibers exhibited a high-water absorption capacity of about 2500% with the water contact-angle and Swelling method. The antibacterial properties of this nanocomposite were also confirmed by an antibacterial test on Staphylococcus aureus bacteria. The growth of Schwann cells on three scaffolds showed the highest growth of cells on CA₁ scaffolds.

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

Improved digestive stability of probiotics encapsulated within poly(vinyl alcohol)/cellulose acetate hybrid fibers

Novel cellulose acetate (CA) and poly(vinyl alcohol) (PVA) hybrid fibers, fabricated via angled dual-nozzle electrospinning, were used for the encapsulation of probiotics to enhance their gastrointestinal stability. In this study, Escherichia coli strain Nissle 1917 (EcN) cells were encapsulated within PVA/CA composite mats, where CA enhanced the bacterial stability under gastric conditions and PVA provided protection against the toxic solvent during the electrospinning process. Scanning electron microscopy images revealed that EcN was successfully encapsulated within the hybrid fibers. In the simulated digestive system, free cells lost their viability within 100 min, whereas PVA/CA-encapsulated cells survived with a final count of 3.9 log CFU/mL (from an initial count of 7.8 log CFU/mL), an increase of 1 log CFU/mL compared with those in PVA/PVA fibers. Considering the enhanced viability of the encapsulated cells in the gastrointestinal system, multi-nozzle electrospinning is a promising technique for the fabrication of novel matrices for probiotic encapsulation.

Composite Hydrogel of Poly(acrylamide) and Starch as Potential System for Controlled Release of Amoxicillin and Inhibition of Bacterial Growth

Novel composite hydrogels of poly(acrylamide) (PAAm) and starch, at different ratios, were studied as potential platforms for controlled release of amoxicillin. The composite hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and swelling kinetic measurements. The morphology analysis revealed the presence of starch granules well embedded within the PAAm network. The increase in starch content increased the rate of water uptake and the swelling degree at equilibrium. The amoxicillin release kinetics was sensitive to pH and temperature conditions. The in vitro bacterial growth inhibition of antibiotic-loaded hydrogels was tested though disc diffusion assays with Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, and a carbapenemase producer Pseudomonas aeruginosa strain. The optimal release profile at physiological conditions and the powerful bacteria growth inhibition effects of amoxicillin-loaded hydrogels evidenced its potential for biomedical applications, particularly in oral administration and the local treatment of bacterial infections.

Functional Nanofibrous Biomaterials of Tailored Structures for Drug Delivery-A Critical Review

Nanofibrous biomaterials have huge potential for drug delivery, due to their structural features and functions that are similar to the native extracellular matrix (ECM). A wide range of natural and polymeric materials can be employed to produce nanofibrous biomaterials. This review introduces the major natural and synthetic biomaterials for production of nanofibers that are biocompatible and biodegradable. Different technologies and their corresponding advantages and disadvantages for manufacturing nanofibrous biomaterials for drug delivery were also reported. The morphologies and structures of nanofibers can be tailor-designed and processed by carefully selecting suitable biomaterials and fabrication methods, while the functionality of nanofibrous biomaterials can be improved by modifying the surface. The loading and releasing of drug molecules, which play a significant role in the effectiveness of drug delivery, are also surveyed. This review provides insight into the fabrication of functional polymeric nanofibers for drug delivery.

Electrospun Nanocomposites Containing Cellulose and Its Derivatives Modified with Specialized Biomolecules for an Enhanced Wound Healing

Wound healing requires careful, directed, and effective therapies to prevent infections and accelerate tissue regeneration. In light of these demands, active biomolecules with antibacterial properties and/or healing capacities have been functionalized onto nanostructured polymeric dressings and their synergistic effect examined. In this work, various antibiotics, nanoparticles, and natural extract-derived products that were used in association with electrospun nanocomposites containing cellulose, cellulose acetate and different types of nanocellulose (cellulose nanocrystals, cellulose nanofibrils, and bacterial cellulose) have been reviewed. Renewable, natural-origin compounds are gaining more relevance each day as potential alternatives to synthetic materials, since the former undesirable footprints in biomedicine, the environment, and the ecosystems are reaching concerning levels. Therefore, cellulose and its derivatives have been the object of numerous biomedical studies, in which their biocompatibility, biodegradability, and, most importantly, sustainability and abundance, have been determinant. A complete overview of the recently produced cellulose-containing nanofibrous meshes for wound healing applications was provided. Moreover, the current challenges that are faced by cellulose acetate- and nanocellulose-containing wound dressing formulations, processed by electrospinning, were also enumerated.

Drug Delivery Applications of Core-Sheath Nanofibers Prepared by Coaxial Electrospinning: A Review

Electrospinning has emerged as one of the potential techniques for producing nanofibers. The use of electrospun nanofibers in drug delivery has increased rapidly over recent years due to their valuable properties, which include a large surface area, high porosity, small pore size, superior mechanical properties, and ease of surface modification. A drug loaded nanofiber membrane can be prepared via electrospinning using a model drug and polymer solution; however, the release of the drug from the nanofiber membrane in a safe and controlled way is challenging as a result of the initial burst release. Employing a core-sheath design provides a promising solution for controlling the initial burst release. Numerous studies have reported on the preparation of core-sheath nanofibers by coaxial electrospinning for drug delivery applications. This paper summarizes the physical phenomena, the effects of various parameters in coaxial electrospinning, and the usefulness of core-sheath nanofibers in drug delivery. Furthermore, this report also highlights the future challenges involved in utilizing core-sheath nanofibers for drug delivery applications.

Biomimetic Growth of Hydroxyapatite on Electrospun CA/PVP Core⁻Shell Nanofiber Membranes

In this study, cellulose acetate (CA)/polyvinylpyrrolidone (PVP) core⁻shell nanofibers were successfully fabricated by electrospinning their homogeneous blending solution. Uniform and cylindrical nanofibers were obtained when the PVP content increased from 0 to 2 wt %. Because of the concentration gradient associated with the solvent volatilization, the composite fibers flattened when the PVP increased to 5 wt %. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed the existence of a hydrogen bond between the CA and PVP molecules, which enhanced the thermodynamic properties of the CA/PVP nanofibers, as shown by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) results. To analyze the interior structure of the CA/PVP fibers, the water-soluble PVP was selectively removed by immersing the fiber membranes in deionized water. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the PVP component, which has a low surface tension, was driven to the exterior of the fiber to form a discontinuous phase, whereas the high-content CA component inclined to form the internal continuous phase, thereby generating a core⁻shell structure. After the water-treatment, the CA/PVP composite fibers provided more favorable conditions for mineral crystal deposition and growth. Energy-dispersive spectroscopy (EDS) and FTIR proved that the crystal was hydroxyapatite (HAP) and that the calcium to phosphorus ratio was 1.47, which was close to the theoretical value of 1.67 in HAP. Such nanofiber membranes could be potentially applicable in bone tissue engineering.

Functional materials based on molecules with hydrogen-bonding ability: applications to drug co-crystals and polymer complexes

The design, synthesis and property characterization of new functional materials has garnered interest in a variety of fields. Materials that are capable of recognizing and binding with small molecules have applications in sensing, sequestration, delivery and property modification. Specifically, recognition of pharmaceutical compounds is of interest in each of the aforementioned application areas. Numerous pharmaceutical compounds comprise functional groups that are capable of engaging in hydrogen-bonding interactions; thus, materials that are able to act as hydrogen-bond receptors are of significant interest for these applications. In this review, we highlight some crystalline and polymeric materials that recognize and engage in hydrogen-bonding interactions with pharmaceuticals or small biomolecules. Moreover, as pharmaceuticals often exhibit multiple hydrogen-bonding sites, many donor/acceptor molecules have been specifically designed to interact with the drug via such multiple-point hydrogen bonds. The formation of multiple hydrogen bonds not only increases the strength of the interaction but also affords unique hydrogen-bonded architectures.

Magnetically triggered release of amoxicillin from xanthan/Fe3O4/albumin patches

This work was motivated by the need of stimuli responsive drug carriers, which can be activated by low cost non-invasive stimuli such as external magnetic field (EMF). Thus, novel antimicrobial materials based on xanthan gum (XG), magnetic nanoparticles (MNP), bovine serum albumin (BSA) and amoxicillin (Amox) were designed in order to promote the release of Amox under magnetic stimuli. Firstly, surfaces with different functionalities were prepared by sequential deposition of thin layers on Si wafers and characterized by means of ellipsometry and atomic force microscopy. Amox adsorbed preferentially onto XG or BSA films. In solution, favorable interactions between Amox and BSA were evidenced by substantial changes in the BSA secondary structure, as revealed by circular dichroism. Patches of XG and XG/MNP/BSA were immersed in 2 g L^-1 Amox, yielding 10 ± 3 and 17 ± 4 μg/cm³ Amox loading, respectively. The inclusion of 0.2 wt% Fe₃O₄ in the patches and their exposure to EMF enabled in vitro release of Amox, at pH 5.5 and 0.02 mol L^-1 NaCl, following the quasi-Fickian behavior. Amox diffused from XG/MNP/BSA patches in agar medium containing Staphylococcus aureus and Escherichia coli, inhibiting their growth. The inhibition of E. coli growth was particularly efficient under EMF.

Fabrication of random and aligned-oriented cellulose acetate nanofibers containing betamethasone sodium phosphate: structural and cell biocompatibility evaluations

The objective of this work was to prepare electrospun cellulose acetate (CA) nanofibers containing betamethasone sodium phosphate (BSP). Two different morphologies including random and aligned orientations were rationally designed to improve the performance of samples in in vitro experiments. By comparing the CA nanofibrous samples with randomly and aligned-oriented morphologies, the scanning electron microscopy images showed that the neat aligned-oriented nanofibers with an average diameter of 180±15 nm could be obtained using a high-speed rotating collector. Subsequently, the tensile test confirmed that the aligned CA nanofibers had higher mechanical properties than that of the randomly oriented ones. Moreover, the BSP release profile obtained by UV-vis spectrophotometry depicted that the aligned samples had an initial burst release of BSP followed by a slow penetration of the drug with a gentle slope during 72 h. Furthermore, the ultimate amounts of BSP released from the random and aligned CA nanofibers into the phosphate buffer solution were 63% and 53%, respectively. Finally, human adipose-derived mesenchymal stem cells were seeded on both aligned and random electrospun CA nanofibrous samples containing BSP. The thiazolyl blue and hematoxylin and eosin staining results showed that the BSP-loaded nanofibers with the aligned morphology provided the most suitable environment for the cells’ growth, viability, and proliferation.

Design of Magnetic Polymeric Particles as a Stimulus-Responsive System for Gastric Antimicrobial Therapy

The treatment of peptic ulcers induced by H. pylori remains challenging due to the deep mucous layer location of bacteria preventing antimicrobial drug access. The present work aimed to design and evaluate in vitro dual responsive (both pH and magnetic field-sensitive) polymeric magnetic particles loaded with amoxicillin as a smart drug carrier for deep mucous layer penetration and in situ drug release. Magnetite particles were produced by the co-precipitation method and subsequently coated with the Eudragit^®S100 and amoxicillin by using the spray-drying technique. The physicochemical characterization of the obtained particles was carried out by optical and scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibrating sample magnetometry. Additionally, drug release tests and antibacterial activity tests were evaluated in vitro. Microparticles presented 17.2 ± 0.4 μm in size and their final composition was 4.3 ± 1.5% of amoxicillin, 87.0 ± 2.3% of Eudragit, and 9.0 ± 0.3% of magnetite. They were both pH and magnetic field responsive while presenting antimicrobial activity. On one side, magnetic field responsiveness of particles is expected to prompt them to reach bacterium niche in deep mucous layer by means of magnetic forces. On the other side, pH responsiveness is expected to enable drug release in the neutral pH of the deep mucous layer, preventing undesired delivery in the acidic gastric lumen. Smart microparticles were designed presenting both pH and magnetic field responsiveness as well as antimicrobial activity. These may be promising assets for peptic ulcer treatment.

Cold Chain-Free Storable Hydrogel for Infant-Friendly Oral Delivery of Amoxicillin for the Treatment of Pneumococcal Pneumonia

Pneumonia is the major cause of death in children under five, particularly in developing countries. Antibiotics such as amoxicillin greatly help in mitigating this problem. However, there is a lack of an infant/toddler-friendly formulation for countries with limited clean water orr electricity. Here, we report the development of a shear-thinning hydrogel system for the oral delivery of amoxicillin to infant/toddler patients, without the need of clean water and refrigeration. The hydrogel formulation consists of metolose (hydroxypropyl methylcellulose) and amoxicillin. It preserves the structural integrity of antibiotics and their antibacterial activity over 12 weeks at room temperature. Pharmacokinetic profiling of mice reveals that the hydrogel formulation increases the bioavailability of drugs by ∼18% compared to that with aqueous amoxicillin formulation. More importantly, oral gavage of this formulation in a mouse model of secondary pneumococcal pneumonia significantly ameliorates inflammatory infiltration and tissue damage in lungs, with a 10-fold reduction in bacterial counts compared to those in untreated ones. Given the remarkable antibacterial efficacy as well as the use of FDA-regulated ingredients (metolose and amoxicillin), the hydrogel formulation holds great promise for rapid clinical translation.

Cellulose Acetate Based Material with Antibacterial Properties Created by Supercritical Solvent Impregnation

Supercritical CO2 was used as a green solvent and impregnation medium for loading cellulose acetate beads with carvacrol in order to obtain a biomaterial with antibacterial properties. Supercritical solvent impregnation was performed in a high-pressure view cell at temperature of 50°C and pressures of 10, 21, and 30 MPa with the processing time ranging from 2 to 18 h. The rate of impregnation increased with the pressure increase. However, maximum impregnation yield (round 60%) was not affected by the pressure applied. Selected samples of the impregnated cellulose acetate containing 6–60% of carvacrol were proven to have considerable antibacterial effect against Gram-positive and Gram-negative bacterial strains including methicillin-resistant Staphylococcus aureus which causes severe infections in humans and animals. In addition, cellulose acetate beads containing 6.0–33.6% of carvacrol were shown to have a porous structure with submicron pores which is of interest for the controlled delivery applications.

Recent advances in multiaxial electrospinning for drug delivery

Electrospun fibers have seen an insurgence in biomedical applications due to their unique characteristics. Coaxial and triaxial electrospinning techniques have added new impetus via fabrication of multilayered nano and micro-size fibers. These techniques offer the possibility of forming fibers with features such as blending, reinforced core, porous and hollow structure. The unique fabrication process can be used to tailor the mechanical properties, biological properties and release of various factors, which can potentially be useful in various controlled drug delivery applications. Harvesting these advantages, various polymers and their combinations have been explored in a number of drug delivery and tissue regeneration applications. New advances have shown the requirement of drug-polymer compatibility in addition to drug-solvent compatibility. We summarize recent findings using both hydrophilic and hydrophobic (or lipophilic) drugs in hydrophobic or hydrophilic polymers on release behavior. We also describe the fundamental forces involved during the electrospinning process providing insight to the factors to be considered to form fibers. Also, various modeling efforts on the drug release profiles are summarized. In addition new developments in the immune response to the electrospun fibers, and advances in scale-up issues needed for industrial size manufacturing.

Preparation and Properties of Electrospun Poly (Vinyl Pyrrolidone)/Cellulose Nanocrystal/Silver Nanoparticle Composite Fibers

Poly (vinyl pyrrolidone) (PVP)/cellulose nanocrystal (CNC)/silver nanoparticle composite fibers were prepared via electrospinning using N,N′-dimethylformamide (DMF) as a solvent. Rheology, morphology, thermal properties, mechanical properties, and antimicrobial activity of nanocomposites were characterized as a function of material composition. The PVP/CNC/Ag electrospun suspensions exhibited higher conductivity and better rheological properties compared with those of the pure PVP solution. The average diameter of the PVP electrospun fibers decreased with the increase in the amount of CNCs and Ag nanoparticles. Thermal stability of electrospun composite fibers was decreased with the addition of CNCs. The CNCs help increase the composite tensile strength, while the elongation at break decreased. The composite fibers included Ag nanoparticles showed improved antimicrobial activity against both the Gram-negative bacterium Escherichia coli (E. coli) and the Gram-positive bacterium Staphylococcus aureus (S. aureus). The enhanced strength and antimicrobial performances of PVP/CNC/Ag electrospun composite fibers make the mat material an attractive candidate for application in the biomedical field.

Controlled release of drugs from cellulose acetate matrices produced from sugarcane bagasse: monitoring by square-wave voltammetry

In this paper, cellulose triacetate (CTA) was produced from sugarcane bagasse and used as matrices for controlled release of paracetamol. Symmetric and asymmetric membranes were obtained by formulations of CTA/dichloromethane/drug and CTA/dichloromethane/water/drug, respectively, and they were characterized by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). Different morphologies of membranes were observed by SEM, and the incorporation of paracetamol was confirmed by lowering of the glass transition temperature (Tg) in the DSC curves. This indicates the existence of interactions between the matrix and the drug. The evaluation of drug release was based on the electrochemical monitoring of paracetamol through its oxidation at a glassy carbon electrode surface using square-wave voltammetry (SWV), which provides fast, precise and accurate in situ measurements. The studies showed a content release of 27% and 45% by the symmetric and asymmetric membranes, respectively, during 8 h.

Advances in skin regeneration: application of electrospun scaffolds

The paucity of cellular and molecular signals essential for normal wound healing makes severe dermatological ulcers stubborn to heal. The novel strategies of skin regenerative treatments are focused on the development of biologically responsive scaffolds accompanied by cells and multiple biomolecules resembling structural and biochemical cues of the natural extracellular matrix (ECM). Electrospun nanofibrous scaffolds provide similar architecture to the ECM leading to enhancement of cell adhesion, proliferation, migration and neo tissue formation. This Review surveys the application of biocompatible natural, synthetic and composite polymers to fabricate electrospun scaffolds as skin substitutes and wound dressings. Furthermore, the application of biomolecules and therapeutic agents in the nanofibrous scaffolds viz growth factors, genes, antibiotics, silver nanoparticles, and natural medicines with the aim of ameliorating cellular behavior, wound healing, and skin regeneration are discussed.

A form-stable phase change material made with a cellulose acetate nanofibrous mat from bicomponent electrospinning and incorporated capric–myristic–stearic acid ternary eutectic mixture for thermal energy storage/retrieval

An innovative type of form-stable PCM was prepared by incorporating CMS ternary eutectic mixture with CA nanofibers that was derived from electrospinning of binary mixture of CA/PVP and subsequent selective dissolution of PVP from bicomponent mat.

Electrospun cellulose acetate nanofibers: the present status and gamut of biotechnological applications

Cellulose acetate (CA) has been a material of choice for spectrum of utilities across different domains ranging from high absorbing diapers to membrane filters. Electrospinning has conferred a whole new perspective to polymeric materials including CA in the context of multifarious applications across myriad of niches. In the present review, we try to bring out the recent trend (focused over last five years' progress) of research on electrospun CA fibers of nanoscale regime in the context of developmental strategies of their blends and nanocomposites for advanced applications. In the realm of biotechnology, electrospun CA fibers have found applications in biomolecule immobilization, tissue engineering, bio-sensing, nutraceutical delivery, bioseparation, crop protection, bioremediation and in the development of anti-counterfeiting and pH sensitive material, photocatalytic self-cleaning textile, temperature-adaptable fabric, and antimicrobial mats, amongst others. The present review discusses these diverse applications of electrospun CA nanofibers.

Preparation, Characterization and Release of Urea from Wheat Gluten Electrospun Membranes

Homogeneous and thin porous membranes composed of oriented fibers were obtained from wheat gluten (WG) using the electrospinning technique. SEM micrographs showed an asymmetric structure and some porosity, which, in addition to a small thickness of 40 μm, are desirable characteristics for the membranes’ potential application in release systems. The membranes were loaded with urea to obtain pastilles. FT-IR and DSC studies confirmed the existence of interactions via hydrogen bonding between urea and WG proteins. The pastilles were studied as prolonged-released systems of urea in water. The release of urea during the first 10 min was very fast; then, the rate of release decreased as it reached equilibrium at 300 min, with a total of ≈98% urea released. TGA analysis showed that the release system obtained is thermally stable up to a temperature of 117 °C. It was concluded that a prolonged-release system of urea could be satisfactorily produced using WG fibers obtained by electrospinning for potential application in agricultural crops.