Micropattern of nano-hydroxyapatite/silk fibroin composite onto Ti alloy surface via template-assisted electrostatic spray deposition

Fortified electrospun collagen utilizing biocompatible Poly Glycerol Sebacate prepolymer (PGSp) and zink oxide nanoparticles (ZnO NPs) for diabetics wound healing: Physical, biological and animal studies

Collagen, a naturally occurring fibrous protein, is a potential resource of biological materials for tissue engineering and regenerative medicine because it is structurally biocompatible, has low immunogenicity, is biodegradable, and is biomimetic. Numerous studies have documented in the literature how Collagen nanofibers exhibit limited cell adhesion, poor viscosity, and no interior fibril structure. The biomedical industry is using Poly Glycerol Sebacate prepolymer(PGSp), a biodegradable and biocompatible polyester with high adhesion and very viscous appearance, more often. Here, unique electrospun Collagen/PGSp/ZnO/NPs blend nanofibers for skin tissue application were developed and described with varied PGSp percent. Additionally, when ternary blends of Collagen, PGSp, and Zink Oxide Nanoparticles (ZnO NPs) are used, the antibacterial properties of the scaffolds are improved. The bead-free electrospun nanofibers were produced by raising the PGSp concentration to 30%w/w. SEM, EDS, tensile, MTT, FTIR, SDS-page, swelling test, contact-angle, antimicrobial, biodegradation, XRD, and cell attachment procedures were used to characterize the crosslinked nanofibers. The ternary blend nanofibers with a weight ratio of Collagen/PGSp 30%/ZnONPs 1% had higher stress/strain strength (0.25 mm/mm), porosity (563), cell survival, and degradation time. Moreover, after applying for wound healing in diabetic rats, Collagen/PGSp 30%/could be show improving wound healing significantly compared to other groups.

Biomimetic fabrication of sr-silk fibroin co-assembly hydroxyapatite based microspheres with angiogenic and osteogenic properties for bone tissue engineering

Bone defects caused by trauma, tumor resection, or developmental abnormalities are important issues in clinical practice. The vigorous development of tissue engineering technology provides new ideas and directions for regenerating bone defects. Hydroxyapatite (HAp), a bioactive ceramic, is extensively used in bone tissue engineering because of its excellent osteoinductive performance. However, its application is challenged by its single function and conventional environment-unfriendly synthesis methods. In this study, we successfully "green" synthesized sr-silk fibroin co-assembly hydroxyapatite nanoparticles (Sr-SF-HA) using silk fibroin (SF) as a biomineralized template, thus enabling it to have angiogenic activity and achieving the combination of organic and inorganic substances. Then, the rough composite microspheres loaded with Sr-SF-HA (CS/Sr-SF-HA) through electrostatic spraying technology and freeze-drying method were prepared. The CCK-8 test and live/dead cell staining showed excellent biocompatibility of CS/Sr-SF-HA. Alkaline phosphatase (ALP) staining, alizarin red staining (ARS), immunofluorescence, western blotting, and qRT-PCR test showed that CS/Sr-SF-HA activated the expression of related genes and proteins, thus inducing the osteogenic differentiation of rBMSCs. Moreover, tube formation experiments, scratch experiments, immunofluorescence, and qRT-PCR detection indicated that CS/Sr-SF-HA have good angiogenic activity. Furthermore, in vivo studies showed that the CS/Sr-SF-HA possesses excellent biocompatibility, vascular activity, as well as ectopic osteogenic ability in the subcutaneous pocket of rats. This study indicates that the construction of CS/Sr-SF-HA with angiogenic and osteogenic properties has great potential for bone tissue engineering.

There Are over 60 Ways to Produce Biocompatible Calcium Orthophosphate (CaPO4) Deposits on Various Substrates

A The present overview describes various production techniques for biocompatible calcium orthophosphate (abbreviated as CaPO4) deposits (coatings, films and layers) on the surfaces of various types of substrates to impart the biocompatible properties for artificial bone grafts. Since, after being implanted, the grafts always interact with the surrounding biological tissues at the interfaces, their surface properties are considered critical to clinical success. Due to the limited number of materials that can be tolerated in vivo, a new specialty of surface engineering has been developed to desirably modify any unacceptable material surface characteristics while maintaining the useful bulk performance. In 1975, the development of this approach led to the emergence of a special class of artificial bone grafts, in which various mechanically stable (and thus suitable for load-bearing applications) implantable biomaterials and artificial devices were coated with CaPO4. Since then, more than 7500 papers have been published on this subject and more than 500 new publications are added annually. In this review, a comprehensive analysis of the available literature has been performed with the main goal of finding as many deposition techniques as possible and more than 60 methods (double that if all known modifications are counted) for producing CaPO4 deposits on various substrates have been systematically described. Thus, besides the introduction, general knowledge and terminology, this review consists of two unequal parts. The first (bigger) part is a comprehensive summary of the known CaPO4 deposition techniques both currently used and discontinued/underdeveloped ones with brief descriptions of their major physical and chemical principles coupled with the key process parameters (when possible) to inform readers of their existence and remind them of the unused ones. The second (smaller) part includes fleeting essays on the most important properties and current biomedical applications of the CaPO4 deposits with an indication of possible future developments.

Electrospray-Assisted Fabrication of Dextran-Whey Protein Isolation Microcapsules for the Encapsulation of Selenium-Enriched Peptide

Selenium-enriched peptide (SP, selenopeptide) is an excellent organic selenium supplement that has attracted increasing attention due to its superior physiological effects. In this study, dextran-whey protein isolation-SP (DX-WPI-SP) microcapsules were fabricated via high-voltage electrospraying technology. The results of preparation process optimization showed that the optimized preparation process parameters were 6% DX (w/v), feeding rate Q = 1 mL/h, voltage U = 15 kV, and receiving distance H = 15 cm. When the content of WPI (w/v) was 4-8%, the average diameter of the as-prepared microcapsules was no more than 45 μm, and the loading rate for SP ranged from ~46% to ~37%. The DX-WPI-SP microcapsules displayed excellent antioxidant capacity. The thermal stability of the microencapsulated SP was improved, which was attributed to the protective effects of the wall materials for SP. The release performance was investigated to disclose the sustained-release capacity of the carrier under different pH values and an in-vitro-simulated digestion environment. The digested microcapsule solution showed negligible influence on the cellular cytotoxicity of Caco-2 cells. Overall, our work provides a facile strategy of electrospraying microcapsules for the functional encapsulation of SP and witnesses a broad prospect that the DX-WPI-SP microcapsules can exhibit great potential in the food processing field.

Polydopamine-assisted immobilization of silk fibroin and its derived peptide on chemically oxidized titanium to enhance biological activity in vitro

Biochemical modification can endow the surface of implants with superior biological activity. Herein, silk fibroin (SF) protein and its anionic derivative peptides (Cs) were covalently immobilized onto a titanium implant surface via a polydopamine layer. The successful conjugation of SF and Cs was revealed by X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and contact angle measurements. The addition of Cs prevented the conformational transition of silk fibroin to silk II. The deposition of apatite on its surface was significantly accelerated, and the bioactive composite coating was observed to enhance protein adsorption and cell proliferation. More importantly, it also promoted the osteogenic differentiation of bone marrow stem cells (BMSCs) for the quantitative and qualitative detection of alkaline phosphatase (ALP) and alizarin red (ARS). Overall, the stable performance and enhanced osteogenic property of the composite coating promote an extensive application for clinical titanium-based implants.

Enhancing Osseointegration of TC4 Alloy by Surficial Activation Through Biomineralization Method

Titanium (Ti) alloys have been applied to biomedical implants for a long time. Although Ti alloys are biocompatible, efforts have been continuously made to improve their bone conductivity and osteogenesis for enhancing their performance. Silk fibroin (SF) is a natural biomaterial with excellent biomedical and mechanical properties, and hydroxyapatite (HAP) nanocomposites derived from SF are promising for producing “artificial bone” owing to their biomedical applicability and strong mechanical functions. Therefore, we built an SF coating on the surface of Ti–6Al–4V alloy, and then the incubated SF-coated Ti alloy were immersed in simulated body fluid to induce mineral deposition of HAP on the alloys. The results from Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) analysis, and Attenuated Total Reflection–Fourier Transform Infrared Spectroscopy (ATR–FTIR) confirmed the deposition of a mineral layer on the SF film surface. The proliferation, adhesion, and differentiation of MG-63 were tested, along with the BMP-2, COX-2, and OPG expression and protein content in the MG-63. Both Ti + SF and Ti + SF + HAP groups exhibited significantly better performance than a control Ti group with regard to the cell adhesion, cell proliferation, and protein expression. Furthermore, the hybrid layer comprising HAP and SF delivered more significant improvement of the osseointegration than the SF alone. It is hoped that the proposed methods can be used for constructing modified surfaces on Ti alloys, as they endowed the implants with good osteogenic potential.

Electrosprayed Soft Capsules of Millimeter Size for Specifically Delivering Fish Oil/Nutrients to the Stomach and Intestines

Contrasting to the traditional centimeter-sized soft capsules that are difficult to swallow or micro/nanometer-sized soft capsules that suffer from limited loading capacity for fish oil/nutrients and lowered stability, the millimeter-sized soft capsules with good enough stability could be a potential solution in solving these problems. Herein, we report millimeter-sized soft core-shell capsules of 0.42-1.85 mm with an inner diameter of 0.36-1.75 mm, for fish oil/nutrients, obtained through an electrospray approach upon optimization of different fabrication parameters such as applied voltage, sodium alginate concentration, shell/core feeding rate ratio, times of feeding rate, and types of coaxial needles. Further in vitro and in vivo studies reveal that the resulting soft capsules were apparently weakened and became mechanically destructive in the simulated small intestine solution and were totally destroyed in the simulated small intestine solution if they were first treated in the simulated stomach solution but not in the simulated stomach solution, which makes the millimeter-sized capsules useful as containers for specific delivery of fish oils and lipophilic nutrients to the stomach and intestines with excellent in vivo bioavailability (>90%). The whole fabrication approach is very facile with no complicated polymer modification and formulations involved, which endows the resulting soft capsules with broad application prospect in food and drug industries.

Allogenic chondrocyte/osteoblast-loaded β-tricalcium phosphate bioceramic scaffolds for articular cartilage defect treatment

The medical community has expressed significant interest in the treatment of cartilage defect. Successful repair of articular cartilage defects remains a challenge in clinics. Due to the huge advantages of 3D micro/nanomaterials, 3D artificial micro/nano scaffolds have been widely developed and explored in the tissue repair of articular joints. In this study, chondrocyte/osteoblast-loaded β-tricalcium phosphate (β-TCP) bioceramic scaffold and chondrocyte-loaded β-TCP bioceramic scaffold were prepared by micromass stem cell culture and bioreactor-based cells-loaded scaffold culture for articular cartilage defect treatment. The results demonstrate chondrocyte and osteoblast can be successfully induced from allogeneic bone marrow stromal cells using micromass stem cell culture. Further, chondrocyte-loaded β-TCP scaffold and osteoblast-loaded β-TCP scaffold can be successfully prepared by bioreactor-based cells-loaded scaffold culture. Finally, the scaffolds are applied for Beagle articular cartilage defect treatment. The relative cartilage regeneration abilities on Beagle femoral trochleae were as follows: Chondrocyte/osteoblast-loaded β-TCP bioceramic scaffold group > chondrocyte-loaded β-TCP bioceramic scaffold group > β-TCP bioceramic scaffold. Therefore, micromass stem cell culture and bioreactor-based cells-loaded scaffold culture can be applied to prepare chondrocyte/osteoblast-loaded β-TCP bioceramic scaffold for articular cartilage defect treatment. It suggests allogenic chondrocyte/osteoblast-loaded β-TCP bioceramic scaffold could be potentially used in the treatment of patients with cartilage defects.

Template-oriented synthesis of hydroxyapatite nanoplates for 3D bone printing

The design of hydroxyapatite (HA) nanoarchitecture is critical for fabricating artificial bone tissues as it dictates the biochemical and the mechanical properties of the final product.

Continuous Near-Field Electrospraying Using a Glass Capillary Nozzle

A continuous near-field electrospray process has been developed to deposit micropatterns. Different from traditional electrospray technologies, the nozzle-to-substrate distance was shortened to less than 5 mm, and a glass capillary nozzle with a diameter of tens of microns was used. Steady and continuous ejection was achieved, and patterns with line widths of sub-100 μm were generated. The influence of experimental parameters was investigated. The critical voltage for electrospray increased with nozzle-to-substrate distance and flow rate. The line width of electrosprayed patterns increased with the increases in applied voltage, flow rate, nozzle diameter, and deposition time. This work provides a simple and potential route for on-demand deposition of micro-/nano-patterns in the electrospray process.

Silk scaffolds in bone tissue engineering: An overview

Bone tissue plays multiple roles in our day-to-day functionality. The frequency of accidental bone damage and disorder is increasing worldwide. Moreover, as the world population continues to grow, the percentage of the elderly population continues to grow, which results in an increased number of bone degenerative diseases. This increased elderly population pushes the need for artificial bone implants that specifically employ biocompatible materials. A vast body of literature is available on the use of silk in bone tissue engineering. The current work presents an overview of this literature from materials and fabrication perspective. As silk is an easy-to-process biopolymer; this allows silk-based biomaterials to be molded into diverse forms and architectures, which further affects the degradability. This makes silk-based scaffolds suitable for treating a variety of bone reconstruction and regeneration objectives. Silk surfaces offer active sites that aid the mineralization and/or bonding of bioactive molecules that facilitate bone regeneration. Silk has also been blended with a variety of polymers and minerals to enhance its advantageous properties or introduce new ones. Several successful works, both in vitro and in vivo, have been reported using silk-based scaffolds to regenerate bone tissues or other parts of the skeletal system such as cartilage and ligament. A growing trend is observed toward the use of mineralized and nanofibrous scaffolds along with the development of technology that allows to control scaffold architecture, its biodegradability and the sustained releasing property of scaffolds. Further development of silk-based scaffolds for bone tissue engineering, taking them up to and beyond the stage of human trials, is hoped to be achieved in the near future through a cross-disciplinary coalition of tissue engineers, material scientists and manufacturing engineers.

STATEMENT OF SIGNIFICANCE

The state-of-art of silk biomaterials in bone tissue engineering, covering their wide applications as cell scaffolding matrices to micro-nano carriers for delivering bone growth factors and therapeutic molecules to diseased or damaged sites to facilitate bone regeneration, is emphasized here. The review rationalizes that the choice of silk protein as a biomaterial is not only because of its natural polymeric nature, mechanical robustness, flexibility and wide range of cell compatibility but also because of its ability to template the growth of hydroxyapatite, the chief inorganic component of bone mineral matrix, resulting in improved osteointegration. The discussion extends to the role of inorganic ions such as Si and Ca as matrix components in combination with silk to influence bone regrowth. The effect of ions or growth factor-loaded vehicle incorporation into regenerative matrix, nanotopography is also considered.

A Review of Structure Construction of Silk Fibroin Biomaterials from Single Structures to Multi-Level Structures

The biological performance of artificial biomaterials is closely related to their structure characteristics. Cell adhesion, migration, proliferation, and differentiation are all strongly affected by the different scale structures of biomaterials. Silk fibroin (SF), extracted mainly from silkworms, has become a popular biomaterial due to its excellent biocompatibility, exceptional mechanical properties, tunable degradation, ease of processing, and sufficient supply. As a material with excellent processability, SF can be processed into various forms with different structures, including particulate, fiber, film, and three-dimensional (3D) porous scaffolds. This review discusses and summarizes the various constructions of SF-based materials, from single structures to multi-level structures, and their applications. In combination with single structures, new techniques for creating special multi-level structures of SF-based materials, such as micropatterning and 3D-printing, are also briefly addressed.

Fabrication and in vitro biological properties of piezoelectric bioceramics for bone regeneration

The piezoelectric effect of biological piezoelectric materials promotes bone growth. However, the material should be subjected to stress before it can produce an electric charge that promotes bone repair and reconstruction conducive to fracture healing. A novel method for in vitro experimentation of biological piezoelectric materials with physiological load is presented. A dynamic loading device that can simulate the force of human motion and provide periodic load to piezoelectric materials when co-cultured with cells was designed to obtain a realistic expression of piezoelectric effect on bone repair. Hydroxyapatite (HA)/barium titanate (BaTiO₃) composite materials were fabricated by slip casting, and their piezoelectric properties were obtained by polarization. The d₃₃ of HA/BaTiO₃ piezoelectric ceramics after polarization was 1.3 pC/N to 6.8 pC/N with BaTiO₃ content ranging from 80% to 100%. The in vitro biological properties of piezoelectric bioceramics with and without cycle loading were investigated. When HA/BaTiO₃ piezoelectric bioceramics were affected by cycle loading, the piezoelectric effect of BaTiO₃ promoted the growth of osteoblasts and interaction with HA, which was better than the effect of HA alone. The best biocompatibility and bone-inducing activity were demonstrated by the 10%HA/90%BaTiO₃ piezoelectric ceramics.

Engineering β-sheet peptide assemblies for biomedical applications

Hydrogels have been widely studied in various biomedical applications, such as tissue engineering, cell culture, immunotherapy and vaccines, and drug delivery. Peptide-based nanofibers represent a promising new strategy for current drug delivery approaches and cell carriers for tissue engineering. This review focuses on the recent advances in the use of self-assembling engineered β-sheet peptide assemblies for biomedical applications. The applications of peptide nanofibers in biomedical fields, such as drug delivery, tissue engineering, immunotherapy, and vaccines, are highlighted. The current challenges and future perspectives for self-assembling peptide nanofibers in biomedical applications are discussed.

Tunable synthesis of self-assembled cyclic peptide nanotubes and nanoparticles

While tremendous efforts have been made in investigating scalable approaches for fabricating nanoparticles, less progress has been made in scalable synthesis of cyclic peptide nanoparticles and nanotubes, despite their great potential for broader biomedical applications. In this paper, tunable synthesis of self-assembled cyclic peptide nanotubes and nanoparticles using three different methods, phase equilibrium, pH-driven, and pH-sensitive methods, were proposed and investigated. The goal is scalable nanomanufacturing of cyclic peptide nanoparticles and nanotubes with different sizes in large quality by controlling multiple process parameters. Cyclo-(L-Gln-D-Ala-L-Glu-D-Ala-)2 was applied to illustrate the proposed ideas. In the study, mass spectrometry and high performance liquid chromatography were employed to verify the chemical structures and purity of the cyclic peptides. Morphology and size of the synthesized nanomaterials were characterized using atomic force microscopy and dynamic light scattering. The dimensions of the self-assembled nanostructures were found to be strongly influenced by the cyclic peptide concentration, side chain modification, pH values, reaction time, stirring intensity, and sonication time. This paper proposed an overall strategy to integrate all the parameters to achieve optimal synthesis outputs. Mechanisms of the self-assembly of the cyclic peptide nanotubes and nanoparticles under variable conditions and tunable parameters were discussed. This study contributes to scalable nanomanufacturing of cyclic peptide based self-assembled nanoparticles and nanotubes for broader biomedical applications.

Calcium orthophosphate deposits: Preparation, properties and biomedical applications

Since various interactions among cells, surrounding tissues and implanted biomaterials always occur at their interfaces, the surface properties of potential implants appear to be of paramount importance for the clinical success. In view of the fact that a limited amount of materials appear to be tolerated by living organisms, a special discipline called surface engineering was developed to initiate the desirable changes to the exterior properties of various materials but still maintaining their useful bulk performances. In 1975, this approach resulted in the introduction of a special class of artificial bone grafts, composed of various mechanically stable (consequently, suitable for load bearing applications) implantable biomaterials and/or bio-devices covered by calcium orthophosphates (CaPO4) to both improve biocompatibility and provide an adequate bonding to the adjacent bones. Over 5000 publications on this topic were published since then. Therefore, a thorough analysis of the available literature has been performed and about 50 (this number is doubled, if all possible modifications are counted) deposition techniques of CaPO4 have been revealed, systematized and described. These CaPO4 deposits (coatings, films and layers) used to improve the surface properties of various types of artificial implants are the topic of this review.