Comparative study of Ag and Au nanoparticles biosensors based on surface plasmon resonance phenomenon

The impact of pH and temperature on the green gold nanoparticles preparation using Jeju Hallabong peel extract for biomedical applications

The utilization of gold nanoparticles (AuNPs) has garnered significant attention in recent times, particularly in the field of biomedical research. The utilization of AuNPs in chemical synthesis procedures raises apprehensions regarding their potential toxicity in living organisms, which is inconsistent with their purported eco-friendly and cost-effective aspects. In this investigation, AuNPs were synthesized via the green synthesis approach utilizing Jeju Hallabong peel extract (HPE), a typical fruit variety indigenous to South Korea. The visible-range absorption spectrum of gold nanoparticles from green synthesis (HAuNPs) that are red wine in color occurs at a wavelength of λ = 517 nm. The morphology and particle size distribution were analysed using transmission electron microscopy (TEM) and ImageJ software. The TEM images reveal that the HAuNPs exhibit a high degree of dispersion and uniformity in their spherical shape, with an average size of approximately 7 nm. Moreover, elevating the initial pH level of the mixed solution has an impact on the decrease in particle dimensions, as evidenced by the blue shift observed in the UV-visible spectroscopy absorbance peak. Elevating the reaction temperature may accelerate the synthesis duration. However, it does not exert a substantial impact on the particle dimensions. The outcomes of an avidin-biocytin colorimetric assay provide preliminary analyses of possible sensor tunability using HAuNPs. The cytotoxicity of HAuNPs was evaluated through in vitro studies using the MTT assay on RAW 264.7 cell lines. The results indicated that the HAuNPs exhibited lower cytotoxicity compared to both chemically reduced gold nanoparticles (CAuNPs).

Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

Deep eutectic solvents (DESs) have recently emerged as an alternative solvent for nanoparticle synthesis. There have been numerous advancements in the fabrication of silver nanoparticles (Ag NPs), but the potential of DESs in Ag NP synthesis was neither considered nor studied carefully. In this study, we present a novel strategy to fabricate Ag NPs in a DES (Ag NPs-DES). The DES composed of ᴅ-glucose, urea, and glycerol does not contain any anions to precipitate with Ag+ cations. Our Ag NPs-DES sample is used in a surface-enhanced Raman scattering (SERS) sensor. The two analytes for SERS quantitation are nitrofurantoin (NFT) and sulfadiazine (SDZ) whose residues can be traced down to 10-8 M. The highest enhancement factors (EFs) are competitive at 6.29 × 107 and 1.69 × 107 for NFT and SDZ, respectively. Besides, the linearity coefficients are extremely close to 1 in the range of 10-8 to 10-3 M of concentration, and the SERS substrate shows remarkable uniformity along with great selectivity. This powerful SERS performance indicates that DESs have tremendous potential in the synthesis of nanomaterials for biosensor substrate construction.

Electroless plating of premetalized polyamide fibers for stretchable conductive devices

A new approach was used to produce electrically conductive polyamide yarns, employing an electroless plating technique, which involved stabilizing silver nanoparticles on the surface of the yarn using Sn²⁺. First, the [Ag(NH₃)²]⁺ complex was reduced using Sn²⁺ to produce silver nanoparticle seed layers on the fiber surface, followed by a formaldehyde reduction. The nucleation and growth of silver nanoparticles on the fiber surface were observed through SEM images, demonstrating varying degrees of silver deposition depending on the silver concentration. This deposition variation was confirmed through XRD patterns, TGA data and UV-vis spectra. Additionally, XPS characterization showed the evolution of the chemical state of silver and tin during the silver reduction process. Electrical resistance revealed that the resistance per unit length of the yarn ranged from 3 ± 0.3 Ω cm^-1 to 70 ± 6 Ω cm^-1, depending on the silver concentration. The resulting silver-plated yarn was incorporated into a stretchable device, demonstrating stable resistance over multiple cycles. This method of fabricating conductive yarn has the potential to open up new possibilities in the design and manufacture of stretchable conductive devices for flexible electronics.

Improving the selective naked-eye detection of COVID-19 mediated by simultaneously using three different target oligonucleotides coated on plasmonic AuNPs/hexagonal Ag@AuNPs

The localized surface plasmon resonance (LSPR) phenomenon provides a versatile property in biosensor technology. This uncommon feature was utilized to produce a homogeneous optical biosensor to detect COVID-19 by the naked-eye readout. In this work, we synthesized two types of plasmonic nanoparticles: (i) AuNPs and (ii) hexagonal core-shell nanoparticles-Au shell on AgNPs (Au@AgNPs). We report herein the development of two colorimetric biosensors employing the efficient targeting and the binding ability for three regions of the COVID-19 genome, that is, S-gene, N-gene and E-gene, at the same time. Two AuNPs and Ag@AuNPs individually coated with three different targets oligonucleotide sequence (TOs) (AuNPs-TOs-mix and Ag@AuNPs-TOs-mix) for simultaneous detection of S-gene, N-gene and E-gene of the COVID-19 virus, using the LSPR and naked-eye methods in the laboratory and biological samples. The target COVID-19 genome RNA detected using the AuNPs-TOs-mix and Ag@AuNPs-TOs-mix can achieve the same sensitivity. The detection ranges by the AuNPs-TOs-mix and Ag@AuNPs-TOs-mix are both sufficiently improved in equal amounts in comparison to any of the AuNPs-TOs and Ag@AuNPs-TOs. The sensitivity of the current COVID-19 biosensors were 94% and 96% based on the number of positive samples detected for AuNPs-TOs-mix and Ag@AuNPs-TOs-mix, respectively. Moreover, all the real-time PCR confirmed negative samples obtained the same results by the biosensor; accordingly, the specificity of this approach got to 100%. The current study reports a selective, reliable, reproducible and visual 'naked-eye' detection of COVID-19, devoid of the requirement of any sophisticated instrumental techniques.Communicated by Ramaswamy H. Sarma.

Anti-aquaporin-4 immunoglobulin G colorimetric detection by silver nanoparticles

Neuromyelitis optica spectrum disorder (NMOSD) is an inflammatory and autoimmune disease whose biomarker is the anti-AQP4-IgG autoantibody that binds to aquaporin-4 (AQP4) protein. We introduced a nanosensor with a sensitivity of 84.6%, higher than the CBA's 76.5%. Using silver nanoparticles (AgNPs), we detected not only seropositive but also some false-negative patients previously classified with CBA. It consisted of AgNPs coated with one of a panel of 5 AQP4 epitopes. The ability in detecting the anti-AQP4-IgG in NMOSD patients depended on the epitope and synergy could be obtained by combining different epitopes. We demonstrated that NMOSD patients could easily be distinguished from healthy subjects and patients with multiple sclerosis. Using the most sensitive AQP4_61-70 peptide, we established a calibration curve to estimate the concentration of anti-AQP4-IgG in seropositive NMOSD patients. The ability to enhance the accuracy of the diagnosis may improve the prognosis of 10-27% of anti-AQP4-IgG seronegative patients worldwide.

Electroconductive Polyaniline–Ag-ZnO Green Nanocomposite Material

Metal-conducting polyaniline (PANI)-based nanocomposite materials have attracted attention in various applications due to their synergism of electrical, mechanical, and optical properties of the initial components. Herein, metal-PANI nanocomposites, including silver nanoparticle-polyaniline (AgNP-PANI), zinc oxide nanoparticle-polyaniline (ZnONP-PANI), and silver-zinc oxide nanoparticle-polyaniline (Ag–ZnONP-PANI), were prepared using the two processes. Nanocomposite-based electrode platforms were prepared by depositing AgNPs, ZnONPs, or Ag–ZnONPs on a PANI modified glass carbon electrode (GCE) in the presence of 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide/N-Hydroxysuccinimide (EDC/NHS, 1:2) as coupling agents. The incorporation of AgNPs, ZnONPs, and Ag–ZnONPs onto PANI was confirmed by UV-Vis spectrophotometry, which showed five absorbance bands at 216 nm, 412 nm, 464 nm, 550 nm, and 831 nm (i.e., transition of π-π*, π-polaron band transition, polaron-π* electronic transition, and AgNPs). The FTIR characteristic signatures of the nanocomposite materials exhibited stretching arising from C–H aromatic, C–O, and C–N stretching mode for benzenoid rings, and =C–H plane bending vibration formed during protonation. The CV voltammograms of the nanocomposite materials showed a quasi-reversible behavior with increased redox current response. Notably, AgNP–PANI–GCE electrode showed the highest conductivity, which was attributed the high conductivity of silver. The increase in peak currents exhibited by the composites shows that AgNPs and ZnONPs improve the electrical properties of PANI, and they could be potential candidates for electrochemical applications.

A Comparison between Silver Nanosquare Arrays and Silver Thin-Films as a Blood Cancer Prognosis Monitoring Electrode Design Using Optical and Electrochemical Characterization

The development of silver (Ag) thin films and the fabrication of Ag nanosquare arrays with the use of an anodic aluminum oxide (AAO) template and leaf extracts were successfully carried out using the DC sputtering and spin coating deposition methods. Ag thin films and Ag nanosquare arrays are developed to monitor cancer prognosis due to the correlation between serum albumin levels and prognostic factors, as well as the binding of serum albumin to the surface of these electrodes. Nanosquare structures were fabricated using AAO templates with varying diameters and a gap distance between adjacent unit cells of 100 nm. The nanosquare array with a diameter of 250 nm and irradiated with electromagnetic waves with a wavelength of around 800 nm possessed the greatest electric field distribution compared to the other variations of diameters and wavelengths. The results of the absorption measurement and simulation showed a greater shift in absorption peak wavelength when carried out using the Ag nanosquare array. The absorption peak wavelengths of the Ag nanosquare array in normal blood and blood with cancer lymphocytes were 700-774 nm and 800-850 nm, respectively. The electrochemical test showed that the sensitivity values of the Ag thin-film electrode deposited using DC sputtering, the Ag thin-film electrode deposited using spin coating, and the Ag nanosquare array in detecting PBS+BSA concentration in the cyclic voltammetry (CV) experiment were 1.308 µA mM-1cm-2, 0.022 µA mM-1cm-2, and 39.917 µA mM-1cm-2, respectively. Meanwhile, the sensitivity values of the Ag thin film and the Ag nanosquare array in detecting the PBS+BSA concentration in the electrochemical impedance spectroscopy (EIS) measurement were 6593.76 Ohm·cm2/mM and 69,000 Ohm·cm2/mM, respectively. Thus, our analysis of the optical and electrochemical characteristics of Ag thin films and Ag nanosquare arrays showed that both can be used as an alternative biomedical technology to monitor the prognosis of blood cancer based on the concentration of serum albumin in blood.

Highly Biocompatible Plasmonically Encoded Raman Scattering Nanoparticles Aid Ultrabright and Accurate Bioimaging

Plasmonically engineered nanomaterials based on Au-Ag for surface-enhanced Raman scattering (SERS)-based biomedicine is of great importance but is still far behind clinical needs because of the poor compatibility between sensitivity and safety. Here, robust plasmonically encoded Raman scattering nanoparticles, named Au core-Raman-active molecule-Ag shell-Au shell nanoparticles (CMSS NPs), were synthesized. The as-developed CMSS NPs possess a unique exterior ultrathin Au shell (∼2.2 nm thickness) that plays double key roles as an effective wrapping layer as well as a plasmonic enhancing layer, thereby showing not only extraordinary stability against oxidative damages and bioerosion but also outstanding SERS sensitivity because of the stronger in-built electromagnetic field, achieving a significant SERS enhancement factor of 3.3 × 108. The results confirm that the individual CMSS NPs show ultrahigh brightness, reproducibility, selectivity, and biocompatibility in single-cell Raman imaging. Moreover, ultrabright in vivo tumor imaging with 1 × 1 mm2 area can be quickly achieved within 35 s under open-air condition. Furthermore, by secondary plasmonic encoding, the CMSS NPs flexibly serve as nanobeacon to monitor single-cell autophagy with improved accuracy. The CMSS NPs are expected as versatile SERS probes that enable ultrabright, fast, and precise Raman-based bioimaging and clinical bioapplications.

Boosted photoresponsivity using silver nanoparticle decorated TiO2 nanowire/reduced graphene oxide thin-film heterostructure

Here, we report on the fabrication and use of a silver (Ag) nanoparticle (NP) decorated TiO₂ nanowire (NW)/reduced graphene oxide (RGO) thin-film (TF) heterostructure as a UV detector, using a controlled method called the glancing angle deposition technique. Transmission electron microscope images show Ag NPs (size 7-13 nm) covering the entire surface of the TiO₂ NWs. A high absorption as well as photoluminescence for the Ag NP-TiO₂ NW/RGO TF sample reveals the generation of a large number of electron-hole pairs compared to bare TiO₂ NW. The resulting plasmonic UV photodetector from the Ag NP-TiO₂ NW/RGO TF exhibits a rectification ratio of 5039 (+10 V) and responsivity of 1760 A W^-1 at 350 nm light (with power density as low as 0.58 µ W cm^-2). Moreover, the device shows fast response speed (rise time of 157 ms and fall time of 488 ms) with detectivity and noise equivalent power of 6.659 × 10¹³ Jones and 51 fW, respectively. The enhanced plasmonic field and high scattering of light, along with the high mobility RGO layer at the bottom, result in the superior performance of the device.

DNA Nanofirecrackers Assembled through Hybridization Chain Reaction for Ultrasensitive SERS Immunoassay of Prostate Specific Antigen

Isothermal nucleic acid amplification technology has been widely adopted for analytical chemistry with the purpose of sensitivity improvement. Herein we present an ultrasensitive concatenated hybridization chain reaction (C-HCR) based surface-enhanced Raman scattering (SERS) immunoassay by forming antibody-antigen-aptamer heterosandwich structures with the model analyte of total prostate specific antigens (tPSA). In the C-HCR, two HCRs, one proceeds with two hairpins and the other with four biotin-modified hairpins, are coupled, making the formation of DNA nanofirecrackers with the lengths longer than 200 nm and more than four hundred million binding sites of streptavidin modified enzymes. These types of DNA nanofirecrackers through the aptamer encoded linker strand to form heterosandwich structures could provide a general signal application platform such as enzyme catalysis with high amplification efficiency. As a proof of concept, the Au@Ag core-shell nanostructure based SERS immunoassay with excellent signal amplification has been developed by employing the streptavidin modified alkaline phosphatase (SA-ALP) through its catalysis of 2-phospho-l-ascorbic acid trisodium salt (AAP) to form Au@Ag core-shell nanostructures via the formation of ascorbic acid (AA) to reduce AgNO₃ and deposition of silver element on gold nanorods (AuNRs). The newly developed method has a detection limit as low as 0.94 fg/mL and has successfully achieved the detection of serum samples from clinical patients, which was consistent with the clinical test results, showing that this C-HCR strategy to form DNA nanofirecrackers has great potential in clinical applications.

Probing Nanoparticle-Cell Interaction Using Micro-Raman Spectroscopy: Silver and Gold Nanoparticle-Induced Stress Effects on Optically Trapped Live Red Blood Cells

Advancements in the field of nanotechnology have resulted in the emergence of a large variety of engineered nanomaterials for innumerable applications. Despite the ubiquitous use of nanomaterials in daily life, concerns regarding the potential toxicity and safety of these materials have also been raised. There is a high demand for assessing the unwanted effects of both gold and silver nanoparticles, which is increasingly being used in biomedical applications. This paper deals with the study of stress due to silver and gold nanoparticles of varying size on red blood cells (RBCs) using Raman tweezers spectroscopy. RBCs were incubated with nanoparticles of size in the 10-100 nm range with the same concentrations, and micro-Raman spectra were recorded by optically trapping the nanoparticle-treated live RBCs. Spectral modifications implicating hemoglobin deoxygenation were observed in all nanoparticle-treated RBCs. One of the probable reason for the deoxygenation trend can be the adhesion of nanoparticles onto the cell surface causing imbalance in cell functioning. Moreover, the higher spectral variations observed for silver nanoparticles indicate that oxidative stress is involved in cell damage. These mechanisms lead to the modification in the hemoglobin structure because of changes in the pH of cytoplasm, which can be detected using Raman spectroscopy.

Core-Shell Gold/Silver Nanoparticles for Localized Surface Plasmon Resonance-Based Naked-Eye Toxin Biosensing

The localized surface plasmon resonance (LSPR) phenomenon provides a versatile property for biodetection. Herein, this unique feature was employed to build a homogeneous optical biosensor to detect staphylococcal enterotoxin A (SEA) in solution down to very low levels by naked-eye readout. If the initial position of the LSPR band is located in the cyan region, even a small red shift (∼2-3 nm) induced by a refractive index change close to the surface of nanoparticles (NPs) could make the light absorption transit from cyan to green and become visually detectable via a concomitant change in the complementary colors. In this work, we aimed at synthesizing two types of NPs based on compositionally complex core-shell NPs-Ag shells on AuNPs (Au@AgNPs) and Ag inside gold nanoshells (Ag@AuNPs). By controlling the thickness of the shells and their surface chemistry with anti-SEA antibody (Ab), the LSPR band was tuned to near 495 and 520 nm for Ag@AuNPs and Au@AgNPs, respectively. The two particle systems were subsequently applied to spectroscopically and visually detect anti-SEA Ab-SEA interactions. Upon the addition of SEA, large red shifts of the LSPR band were observed spectroscopically and the limits of detection (LODs) were estimated to be 0.2 and 0.4 nM for Au@AgNPs and Ag@AuNPs, respectively. Although the two sets of NPs gave almost identical LODs, the Ag@AuNPs whose initial position of the LSPR band was tuned in the cyan to green region (∼500 nm) displayed a substantially more distinct color change from orange to red, as revealed by the naked eye. We foresee significant potential to this strategy in medical diagnostics and environmental monitoring, especially when basic laboratory infrastructure is sparse or nonexistent.

Ag and Au nanoparticles/reduced graphene oxide composite materials: Synthesis and application in diagnostics and therapeutics

The exceptional electrical, thermal, optical and mechanical properties have made two dimensional sp² hybridized graphene a material of choice in both academic as well as industrial research. In the last few years, researchers have devoted their efforts towards the development of graphene/polymer, graphene/metal nanoparticle and graphene/ceramic nanocomposites. These materials display excellent mechanical, electrical, thermal, catalytic, magnetic and optical properties which cannot be obtained separately from the individual components. Fascinating physical and chemical properties are displayed by noble metal nanomaterials and thus they represent model building blocks for modifying nanoscale structures for diverse applications extending from catalysis, optics to nanomedicine. Insertion of noble metal (Au, Ag) nanoparticles (NPs) into chemically derived graphene is thus of primary importance to open new avenues for both materials in various fields where the specific properties of each material act synergistically to provide hybrid materials with exceptional performances. This review attempts to summarize the different synthetic procedures for the preparation of Ag and Au NPs/reduced graphene oxide (rGO) composites. The synthesis processes of metal NPs/rGO composites are categorised into in-situ and ex-situ techniques. The in-situ approach consists of simultaneous reduction of metal salts and GO to obtain metal NPs/rGO nanocomposite materials, while in the ex-situ process, the metal NPs of desired size and shape are first synthesized and then transferred onto the GO or rGO matrix. The application of the Ag NPs and Au NPs/rGO composite materials in the area of biomedical (drug delivery and photothermal therapy) and biosensing are the focus of this review article.

Electron Compensation Effect Suppressed Silver Ion Release and Contributed Safety of Au@Ag Core-Shell Nanoparticles

Silver nanoparticles (Ag NPs) have promising plasmonic properties, however, they are rarely used in biomedical applications because of their potent toxicity. Herein, an electron compensation effect from Au to Ag was applied to design safe Au@Ag core-shell NPs. The Ag shell thickness was precisely regulated to enable the most efficient electron enrichment in Ag shell of Au@Ag_2.4 NPs, preventing Ag oxidation and subsequent Ag⁺ ion release. X-ray photoelectron spectroscopy and X-ray absorption near-edge structure analysis revealed the electron transfer process from Au core to Ag shell, and inductively coupled plasma optical emission spectroscopy analysis confirmed the low Ag⁺ ion release from Au@Ag_2.4 NPs. Bare Au@Ag_2.4 NPs showed much lower toxicological responses than Ag NPs in BEAS-2B and Raw 264.7 cells and acute lung inflammation mouse models, and PEGylation of Au@Ag_2.4 NPs could further improve their safety to L02 and HEK293T cells as well as mice through intravenous injection. Further, diethylthiatri carbocyanine iodide attached pAu@Ag_2.4 NPs exhibited intense surface-enhanced Raman scattering signals and were used for Raman imaging of MCF7 cells and Raman biosensing in MCF7 tumor-bearing mice. This electron compensation effect opens up new opportunity for broadening biomedical application of Ag-based NPs.

Silver-Based Plasmonic Nanoparticles for and Their Use in Biosensing

The localized surface plasmon resonance (LSPR) property of metallic nanoparticles is widely exploited for chemical and biological sensing. Selective biosensing of molecules using functionalized nanoparticles has become a major research interdisciplinary area between chemistry, biology and material science. Noble metals, especially gold (Au) and silver (Ag) nanoparticles, exhibit unique and tunable plasmonic properties; the control over these metal nanostructures size and shape allows manipulating their LSPR and their response to the local environment. In this review, we will focus on Ag-based nanoparticles, a metal that has probably played the most important role in the development of the latest plasmonic applications, owing to its unique properties. We will first browse the methods for AgNPs synthesis allowing for controlled size, uniformity and shape. Ag-based biosensing is often performed with coated particles; therefore, in a second part, we will explore various coating strategies (organics, polymers, and inorganics) and their influence on coated-AgNPs properties. The third part will be devoted to the combination of gold and silver for plasmonic biosensing, in particular the use of mixed Ag and AuNPs, i.e., AgAu alloys or Ag-Au core@shell nanoparticles will be outlined. In the last part, selected examples of Ag and AgAu-based plasmonic biosensors will be presented.

Cross-reactivity between myelin oligodendrocyte glycoprotein and human endogenous retrovirus W protein: nanotechnological evidence for the potential trigger of multiple sclerosis

Multiple sclerosis (MS) is an autoimmune and inflammatory demyelinating disease of the central nervous system. Experimental evidence supports the reactivity of autoantibodies against components of myelin sheath including the myelin oligodendrocyte glycoprotein (MOG). The MS etiology is still unknown, but some risk factors associated with immune dysregulation, genetic susceptibility, and environmental factors are under investigation. The last consider the hypothesis of molecular mimicry mechanism, which is potentially triggered by viral antigen inducing MS autoimmunity. The Human Endogenous Retroviruses W family (HERV-W) is the subject of studies within this field, based on the detection of HERV-W envelope gene proteins in MS patients' samples. In the biomedical field of diagnosis and therapeutics, nanotechnology is of great use for the detailed study of molecular mechanisms involving specific interactions between biomolecules providing high specificity and sensitivity of response. In view of the significance of etiological aspects for the comprehension of MS mechanisms of action, we applied a nanotechnological approach designed for antibody detection. For this, we analyzed MOG peptide sequences similar to the HERV-W protein. These sequences were subjected to interaction with anti-HERV-W antibodies using atomic force spectroscopy (AFS) and silver nanoparticles (AgNPs) methods to survey the potential occurrence of molecular mimicry. Our results revealed the molecular recognition between the anti-HERV-W antibody and the HERV-W and MOG epitopes by AFS and AgNPs approaches. Specific non-linear shape of force curves and median adhesion force values within the expected range for an antigen-antibody interaction were obtained for HERV-W and MOG peptides, 163 pN and 178 pN, respectively, suggesting the occurrence of cross-reactivity in these systems.

Radiation losses and dark mode at light guiding by a linear chain of nanoparticles

A new general formula is presented for a collective extinction cross section of a dielectric or a metallic nanoparticle ensemble in terms of incident electric field work on currents excited inside particles. The formula is obtained by identical transformation of the well-known expression for the summing power of electromagnetic field energy losses caused by particle ensemble scattering and absorption. The derived formula is applied to the problem of radiation losses at electromagnetic excitation transfer along a straight chain of particles. Our general formula predicts a zero collective extinction cross section for an infinite straight chain of nonabsorbing dielectric particles providing that the projection of the wave vector of an incident electromagnetic wave on the chain axis does not coincide with its counterpart of the Bloch wave vector of propagating excitation. In another case of a finite chain of particles, with only the first particle of the chain irradiated by an incident narrow electromagnetic wave beam, the derived formula shows that only the irradiated particle directly contributes to the collective extinction cross section despite how large the total number of particles can be, which makes a direct summing contribution of all other particles to wave scattering as if they were unviewed (dark mode). Using a recently developed quasi-separable T-scattering operator approach that leads to the equation system for self-consistent currents excited inside particles by an incident electromagnetic wave field and restricting ourselves to the electric dipole single scattering and neighbor coupling approximation, we revealed a few gigahertz transparency band in the terahertz frequency range (orange color) in the spectra of a straight chain of closely spaced gold nanospheres of a certain radius and a length of a few millimeters. A resonant mechanism of filtering the dark mode from radiation losses established in this work allowed us to reveal a few-fold-more narrow passband in the spectra of a longer gold particle chain with the full length of a few centimeters.

Calix-Based Nanoparticles: A Review

Calixarenes are considered as third generation supramolecules with hollow cavity-like architecture whereas nanoparticles are small entities with dimensions in the nanoscale. Many exciting achievements are seen when the calix system merges with nanoparticles which produces many fascinating facets in all fields of contemporary chemistry. The properties of nanoparticles which are tuned by calixarenes find applications in sensing, catalysis, molecular recognition, etc. Here, we have reviewed the chemistry of calix-based nanoparticles, and emphasis is laid on the modified, reducing, templated and stabilizing roles of calixarenes. This review covers the research being carried out in the domain of calix protected metal nanoparticles during last 18 years under the canopy of important 109 references. This article contains 58 figures which include 81 easy to understand structures. Calix-protected nanoparticles have enthralled researchers in the field of nanoscience with a tremendous growth in its applications, which heralds much promise to become in future a separate area of research.

Galvanic replacement-free deposition of Au on Ag for core-shell nanocubes with enhanced chemical stability and SERS activity

We report a robust synthesis of Ag@Au core-shell nanocubes by directly depositing Au atoms on the surfaces of Ag nanocubes as conformal, ultrathin shells. Our success relies on the introduction of a strong reducing agent to compete with and thereby block the galvanic replacement between Ag and HAuCl4. An ultrathin Au shell of 0.6 nm thick was able to protect the Ag in the core in an oxidative environment. Significantly, the core-shell nanocubes exhibited surface plasmonic properties essentially identical to those of the original Ag nanocubes, while the SERS activity showed a 5.4-fold further enhancement owing to an improvement in chemical enhancement. The combination of excellent SERS activity and chemical stability may enable a variety of new applications.

Amperometric sensing of anti-HIV drug zidovudine on Ag nanofilm-multiwalled carbon nanotubes modified glassy carbon electrode

The zidovudine (ZDV) is the first drug approved for the treatment of HIV virus infection. The detection and determination of this drug are very importance in human serum because of its undesirable effects. A new ZDV sensor was fabricated on the basis of nanocomposite of silver nanofilm (Ag-NF) and multiwalled carbon nanotubes (MWCNTs) immobilized on glassy carbon electrode (GCE). The modified electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), cyclic voltammetry (CV), and linear sweep voltammetry (LSV) techniques. Results showed that the electrodeposited silver has a nanofilm structure and further electrochemical studies showed that the prepared nanocomposite has high electrocatalytic activity and is appropriate for using in sensors. The amperometric technique under optimal conditions is used for the determination of ZDV ranging from 0.1 to 400ppm (0.37μM-1.5mM) with a low detection limit of 0.04ppm (0.15μM) (S/N=3) and good sensitivity. The prepared sensor possessed accurate and rapid response to ZDV and shows an average recovery of 98.6% in real samples.

Surface-enhanced Raman scattering (SERS) chips made from metal nanoparticle-doped polymer fibers

We employed an electrospinning method to prepare metal nanoparticle (NP) doped polymer nanofiber mats, which can be easily cut to size and fixed on slides or in microfluidic channels for surface-enhanced Raman scattering (SERS) measurements.

Generation of polypeptide-templated gold nanoparticles using ionizing radiation

Ionizing radiation, including γ rays and X-rays, are high-energy electromagnetic radiation with diverse applications in nuclear energy, astrophysics, and medicine. In this work, we describe the use of ionizing radiation and cysteine-containing elastin-like polypeptides (C(n)ELPs, where n = 2 or 12 cysteines in the polypeptide sequence) for the generation of gold nanoparticles. In the presence of C(n)ELPs, ionizing radiation doses higher than 175 Gy resulted in the formation of maroon-colored gold nanoparticle dispersions, with maximal absorbance at 520 nm, from colorless metal salts. Visible color changes were not observed in any of the control systems, indicating that ionizing radiation, gold salt solution, and C(n)ELPs were all required for nanoparticle formation. The hydrodynamic diameters of nanoparticles, determined using dynamic light scattering, were in the range of 80-150 nm, while TEM imaging indicated the formation of gold cores 10-20 nm in diameter. Interestingly, C2ELPs formed 1-2 nm diameter gold nanoparticles in the absence of radiation. Our results describe a facile method of nanoparticle formation in which nanoparticle size can be tailored based on radiation dose and C(n)ELP type. Further improvements in these polypeptide-based systems can lead to colorimetric detection of ionizing radiation in a variety of applications.

Ultrathin gold-shell coated silver nanoparticles onto a glass platform for improvement of plasmonic sensors

A facile and effective approach for the improvement of localized surface plasmon resonance (LSPR) biosensors based on silver-core and gold-shell nanoparticles (Ag@AuNPs) on a glass substrate was investigated. Silver nanoparticles (core) with thin gold shells on a transparent indium tin oxide (ITO) coated glass surface were prepared by sequential electrodeposition, and the influence of the thickness of the gold shell was systematically investigated. The experimental results indicate that the properties of an LSPR band of ultrathin (∼1.3 nm) gold-shell coated silver nanoparticles are very similar to those of silver nanoparticles alone. The refractive index (RI) sensitivities of the metal nanostructures are calculated as 123 and 220 nm/RIU for the silver cores (∼480 nm of LSPR peak) and Ag@AuNPs (∼503 nm of LSPR peak), respectively, on the ITO substrate. The RI sensitivity of Ag@AuNPs was significantly enhanced by coating the silver nanoparticles with an ultrathin gold shell. This core-shell platform was also applied to the fabrication of biosensors. Thus, this strategy can be used to construct inexpensive, stable, versatile, and sensitive LSPR biosensors.