Synthesis and characterization of antibacterial polyurethane coatings from quaternary ammonium salts functionalized soybean oil based polyols

Fabrication of antimicrobial and high-toughness poly (lactic acid) composite films using tung oil derivatives

Tung oil derivatives are promising alternatives to traditional toxic plasticizers for improving the toughness of poly (lactic acid) (PLA) films. In this study, a tung oil-based quaternary ammonium salt (Q-ETO) was synthesized using a multi-step process involving epoxidation, ring opening, and substitution reactions. PLA based composite films with various amounts of Q-ETO were prepared by solvent casting. The impact of various amount of Q-ETO on PLA/Q-ETO composite films were evaluated with regard to their mechanical properties, hydrophilicity, water vapor permeability, optical properties, thermal stability, antibacterial properties, and leaching properties. The PLA/5%Q-ETO composite film yielded the highest elongation at break (82.52 ± 9.53 %), which was 153.67 % higher than that of pure PLA. All PLA composite films showed an antibacterial efficiency exceeding 90 % against both S. aureus and E. coli. Moreover, the PLA/Q-ETO composite film blocked the transmission of both ultraviolet and visible light while preventing the permeation of water vapor. The addition of Q-ETO only weakly affected the color and thermal stability of the PLA/Q-ETO composite film. Given the numerous advantages of the PLA composite film, it has significant potential for application as a food packaging material.

A high-efficient antibacterial and biocompatible polyurethane film with Ag@rGO nanostructures prepared by microwave-assisted method: Physicochemical and dermal wound healing evaluation

Wound infections are a significant issue that can hinder the wound healing process. One way to address this problem is by enhancing the antibacterial activity of wound dressings. Accordingly, this work focuses on developing a castor-oil-based antibacterial polyurethane nanocomposite film impregnated with silver nanoparticles (AgNPs) decorated on the surface of reduced graphene oxide (rGO) nanostructures (Ag@rGO). To this aim, rGOs act as a platform to stabilize AgNPs and improve their bioavailability and dispersion quality within the PU film. The microwave-assisted synthesis of Ag@rGO nanohybrids was proved by FTIR, XRD, TGA, FE-SEM, EDS, and TEM analyses. Compared to PU/GO, the effect of Ag@rGO nanohybrids on thermo-mechanical features, morphology, antibacterial activity, cytocompatibility, and in vivo wound healing was assessed. SEM photomicrographs revealed the enhanced dispersion of Ag@rGO nanohybrids compared to GO nanosheets. Besides, according to XRD results, PU/Ag@rGO nanocomposite film demonstrated higher microphase mixing, which could be due to the finely dispersed Ag@rGO nanostructures interrupting the hydrogen bonding interactions in the hard segments. Moreover, PU/Ag@rGO nanocomposite showed excellent antibacterial behavior with completely killing E. coli and S. aureus bacteria. In vitro and in vivo wound healing studies displayed PU/Ag@rGO film effectively stimulated fibroblast cells proliferation, migration and re-epithelialization. However, the prepared antibacterial PU/Ag@rGO nanocomposite film has the potential to be used as a biomaterial for dermal wound healing applications.

Synthesis and Characterization of Antimicrobial Hydrophobic Polyurethane

Food borne illness remains a major threat to public health despite new governmental guidelines and industry standards. Cross-contamination of both pathogenic and spoilage bacteria from the manufacturing environment can promote consumer illness and food spoilage. While there is guidance in cleaning and sanitation procedures, manufacturing facilities can develop bacterial harborage sites in hard-to-reach areas. New technologies to eliminate these harborage sites include chemically modified coatings that can improve surface characteristics or incorporate embedded antibacterial compounds. In this article we synthesize a 16 carbon length quaternary ammonium bromide (C16QAB) modified polyurethane and perfluoropolyether (PFPE) copolymer coating with low surface energy and bactericidal properties. The introduction of PFPE to the polyurethane coatings lowered the critical surface tension from 18.07 mN m^-1 in unmodified polyurethane to 13.14 mN m^-1 in modified polyurethane. C16QAB + PFPE polyurethane was bactericidal against Listeria monocytogenes (>6 log reduction) and Salmonella enterica (>3 log reduction) after just eight hours of contact. The combination of low surface tension from the perfluoropolyether and antimicrobial from the quaternary ammonium bromide produced a multifunctional polyurethane coating suitable for coating on non-food contact food production surfaces to prevent survival and persistence of pathogenic and spoilage organisms.

Anti-Fouling and Anti-Biofilm Performance of Self-Polishing Waterborne Polyurethane with Gemini Quaternary Ammonium Salts

Biofilms are known to be difficult to eradicate and control, complicating human infections and marine biofouling. In this study, self-polishing and anti-fouling waterborne polyurethane coatings synthesized from gemini quaternary ammonium salts (GQAS), polyethylene glycol (PEG), and polycaprolactone diol (PCL) demonstrate excellent antibiofilm efficacy. Their anti-fouling and anti-biofilm performance was confirmed by a culture-based method in broth media, with the biofilm formation factor against Gram-positive (S. aureus) and Gram-negative bacterial strains (E. coli) for 2 days. The results indicate that polyurethane coatings have excellent anti-biofilm activity when the content of GQAS reached 8.5 wt% against S. aureus, and 15.8 wt% against E. coli. The resulting waterborne polyurethane coatings demonstrate both hydrolytic and enzymatic degradation, and the surface erosion enzymatic degradation mechanism enables them with good self-polishing capability. The extracts cyto-toxicity of these polyurethane coatings and degradation liquids was also systematically studied; they could be degraded to non-toxic or low toxic compositions. This study shows the possibility to achieve potent self-polishing and anti-biofilm efficacy by integrating antibacterial GQAS, PEG, and PCL into waterborne polyurethane coatings.

Design of Thermoplastic Polyurethanes with Conferred Antibacterial, Mechanical, and Cytotoxic Properties for Catheter Application

Thermoplastic polyurethanes (TPUs) are proposed as suitable solution for the fabrication of biocompatible catheters with appropriate mechanical parameters and confirmed antibacterial and cytocompatible properties. For this purpose, a series of quaternary ammonium salts (QASs) and quaternary phosphonium salts (QPSs) based monomers were prepared followed by the determination of their minimal inhibitory concentrations (MICs) against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Pseudomonas aeruginosa (P. aeruginosa). A combination of the most active ammonium (QAS-C₁₄) and phosphonium (QPS-TOP) salts led to a MIC down to 2.4 μg/mL against S. aureus and 9 μg/mL against P. aeruginosa, corroborating the existence of a synergistic effect. These quaternary onium salt (QOS) units were successfully incorporated along the polymer chain, as part of a two-step synthesis approach. The resulting TPU-QOS materials were subsequently characterized through thermal, mechanical, and surface analyses. TPU-Mix (combining the most active QAS-C₁₄ and QPS-TOP units) showed the highest antibacterial efficiency, confirming the synergistic effect between both QOS groups. Finally, an MTT assay on the SiHa cell line revealed the low cytotoxicity level of these polymeric films, making these materials suitable for biomedical application. To go one step further in the preindustrialization approach, proof of concept regarding the catheter prototype fabrication based on TPU-QAS/QPS was validated by extrusion.

Natural Additives Improving Polyurethane Antimicrobial Activity

In recent years, there has been a growing interest in using polymers with antibacterial and antifungal properties; therefore, the present review is focused on the effect of natural compounds on the antibacterial and antifungal properties of polyurethane (PUR). This topic is important because materials and objects made with this polymer can be used as antibacterial and antifungal ones in places where hygiene and sterile conditions are particularly required (e.g., in healthcare, construction industries, cosmetology, pharmacology, or food industries) and thus can become another possibility in comparison to commonly used disinfectants, which mostly show high toxicity to the environment and the human health. The review presents the possibilities of using natural extracts as antibacterial, antifungal, and antiviral additives, which, in contrast to the currently used antibiotics, have a much wider effect. Antibiotics fight bacterial infections by killing bacteria (bactericidal effect) or slowing and stopping their growth (bacteriostatic effect) and effect on different kinds of fungi, but they do not fight viruses; therefore, compounds of natural origin can find wide use as biocidal substances. Fungi grow in almost any environment, and they reproduce easily in dirt and wet spaces; thus, the development of antifungal PUR foams is focused on avoiding fungal infections and inhibiting growth. Polymers are susceptible to microorganism adhesion and, consequently, are treated and modified to inhibit fungal and bacterial growth. The ability of micro-organisms to grow on polyurethanes can cause human health problems during the use and storage of polymers, making it necessary to use additives that eliminate bacteria, viruses, and fungi.

Laponite/amoxicillin-functionalized PLA nanofibrous as osteoinductive and antibacterial scaffolds

In this study, Amoxicillin (AMX) was loaded on laponite (LAP) nanoplates and then immobilized on the surface of electrospun polylactic acid (PLA) nanofibers to fabricate scaffolds with osteoinductive and antibacterial activities. The highest loading efficiency (49%) was obtained when the concentrations of AMX and LAP were 3 mg/mL and 1 mg/mL, respectively. FTIR and XRD spectroscopies and zeta potentiometry confirmed the successful encapsulating of AMX within LAP nanoplates. The immobilization of AMX-loaded LAPs on the surface of PLA nanofibers was verified by SEM and FTIR spectroscopy. In vitro release study showed a two-phase AMX release profile for the scaffolds; an initial burst release within the first 48 h and a later sustained release up to 21 days. In vitro antibacterial tests against Staphylococcus aureus and Escherichia coli presented the ability of scaffolds to inhibit the growth of both bacteria. The biocompatibility assays revealed the attachment and viability of human bone marrow mesenchymal stem cells (hBMSCs) cultured on the surface of scaffolds (p ≤ 0.05). The increased ALKALINE PHOSPHATASE (ALP) activity (p ≤ 0.001), calcium deposition, and expression of ALP and OSTEONECTIN genes indicated the osteoinductivity of functionalized scaffolds for hBMSCs. These LAP/AMX-functionalized scaffolds might be desirable candida for the treatment of bone defects.

Plant oil-based polymers

Polymer materials derived from natural resources have gained increasing attention in recent years because of the uncertainties concerning petroleum supply and prices in the future as well as their environmental pollution problems. As one of the most abundant renewable resources, plant oils are suitable starting materials for polymers because of their low cost, the rich chemistry that their triglyceride structure provides, and their potential biodegradability. This chapter covers the structure, modification of triglycerides and their derivatives as well as synthesis of polymers therefrom. The remarkable advances during the last two decades in organic synthesis using plant oils and the basic oleochemicals derived from them are selectively reported and updated. Various methods, such as condensation, radical/cationic polymerization, metathesis procedure, and living polymerization, have also been applied in constructing oil-based polymers. Based on the advance of these changes, traditional polymers such as polyamides, polyesters, and epoxy resins have been renewed. Partial oil-based polymers have already been applied in some industrial areas and recent developments in this field offer promising new opportunities.

Antimicrobial Polymeric Structures Assembled on Surfaces

Pathogenic microbes are the main cause of various undesired infections in living organisms, including humans. Most of these infections are favored in hospital environments where humans are being treated with antibiotics and where some microbes succeed in developing resistance to such drugs. As a consequence, our society is currently researching for alternative, yet more efficient antimicrobial solutions. Certain natural and synthetic polymers are versatile materials that have already proved themselves to be highly suitable for the development of the next-generation of antimicrobial systems that can efficiently prevent and kill microbes in various environments. Here, we discuss the latest developments of polymeric structures, exhibiting (reinforced) antimicrobial attributes that can be assembled on surfaces and coatings either from synthetic polymers displaying antiadhesive and/or antimicrobial properties or from blends and nanocomposites based on such polymers.

Biobased polyurethanes for biomedical applications

Polyurethanes (PUs) are a major family of polymers displaying a wide spectrum of physico-chemical, mechanical and structural properties for a large range of fields. They have shown suitable for biomedical applications and are used in this domain since decades. The current variety of biomass available has extended the diversity of starting materials for the elaboration of new biobased macromolecular architectures, allowing the development of biobased PUs with advanced properties such as controlled biotic and abiotic degradation. In this frame, new tunable biomedical devices have been successfully designed. PU structures with precise tissue biomimicking can be obtained and are adequate for adhesion, proliferation and differentiation of many cell's types. Moreover, new smart shape-memory PUs with adjustable shape-recovery properties have demonstrated promising results for biomedical applications such as wound healing. The fossil-based starting materials substitution for biomedical implants is slowly improving, nonetheless better renewable contents need to be achieved for most PUs to obtain biobased certifications. After a presentation of some PU generalities and an understanding of a biomaterial structure-biocompatibility relationship, recent developments of biobased PUs for non-implantable devices as well as short- and long-term implants are described in detail in this review and compared to more conventional PU structures.

Jatropha Oil as a Substituent for Palm Oil in Biobased Polyurethane

Polyurethanes (PUs) are unique polymers that can be tailored to suit certain applications and are increasingly used in many industrial fields. Petrochemicals are still used as the main compound to synthesize PUs. Today, environmental concerns arise in the research and technology innovations in developing PUs, especially from vegetable polyols which are having an upsurge. These are driven by the uncertainty and fluctuations of petroleum crude oil price and availability. Jatropha has become a promising substituent to palm oil so as to reduce the competition of food and nonfood in utilizing this natural resource. Apart from that, jatropha will solve the problem related to the European banning of palm oil. Herein, we review the literature on the synthesis of PUs using different vegetable oils and compare it with jatropha oil and its nanocomposites reinforced with cellulose nanocrystals. Given the potential of vegetable oil PUs in many industrial applications, we expect that they will increase commercial interest and scientific research to bring these materials to the market soon.

Optimisation of Epoxide Ring-Opening Reaction for the Synthesis of Bio-Polyol from Palm Oil Derivative Using Response Surface Methodology

The development of bio-polyol from vegetable oil and its derivatives is gaining much interest from polyurethane industries and academia. In view of this, the availability of methyl oleate derived from palm oil, which is aimed at biodiesel production, provides an excellent feedstock to produce bio-polyol for polyurethane applications. In this recent study, response surface methodology (RSM) with a combination of central composite rotatable design (CCRD) was used to optimise the reaction parameters in order to obtain a maximised hydroxyl value (OHV). Three reaction parameters were selected, namely the mole ratio of epoxidised methyl oleate (EMO) to glycerol (1:5-1:10), the amount of catalyst loading (0.15-0.55%) and reaction temperature (90-150 °C) on a response variable as the hydroxyl value (OHV). The analysis of variance (ANOVA) indicated that the quadratic model was significant at 98% confidence level with (p-value > 0.0001) with an insignificant lack of fit and the regression coefficient (R2) was 0.9897. The optimum reaction conditions established by the predicted model were: 1:10 mole ratio of EMO to glycerol, 0.18% of catalyst and 120 °C reaction temperature, giving a hydroxyl value (OHV) of 306.190 mg KOH/g for the experimental value and 301.248 mg KOH/g for the predicted value. This result proves that the RSM model is capable of forecasting the relevant response. FTIR analysis was employed to monitor the changes of functional group for each synthesis and the confirmation of this finding was analysed by NMR analysis. The viscosity and average molecular weight (MW) were 513.48 mPa and 491 Da, respectively.

A Glance at Antimicrobial Strategies to Prevent Catheter-Associated Medical Infections

Urinary and intravascular catheters are two of the most used invasive medical devices; however, microbial colonization of catheter surfaces is responsible for most healthcare-associated infections (HAIs). Several antimicrobial-coated catheters are available, but recurrent antibiotic therapy can decrease their potential activity against resistant bacterial strains. The aim of this Review is to question the actual effectiveness of currently used (coated) catheters and describe the progress and promise of alternative antimicrobial coatings. Different strategies have been reviewed with the common goal of preventing biofilm formation on catheters, including release-based approaches using antibiotics, antiseptics, nitric oxide, 5-fluorouracil, and silver as well as contact-killing approaches employing quaternary ammonium compounds, chitosan, antimicrobial peptides, and enzymes. All of these strategies have given proof of antimicrobial efficacy by modifying the physiology of pathogens or disrupting their structural integrity. The aim for synergistic approaches using multitarget processes and the combination of both antifouling and bactericidal properties holds potential for the near future. Despite intensive research in biofilm preventive strategies, laboratorial studies still present some limitations since experimental conditions usually are not the same and also differ from biological conditions encountered when the catheter is inserted in the human body. Consequently, in most cases, the efficacy data obtained from in vitro studies is not properly reflected in the clinical setting. Thus, further well-designed clinical trials and additional cytotoxicity studies are needed to prove the efficacy and safety of the developed antimicrobial strategies in the prevention of biofilm formation at catheter surfaces.

Polyurethane-Based Coatings with Promising Antibacterial Properties

In coatings technology, the possibility of introducing specific characteristics at the surface level allows for the manufacture of medical devices with efficient and prolonged antibacterial properties. This efficiency is often achieved by the use of a small amount of antibacterial molecules, which can fulfil their duty while limiting eventual releasing problems. The object of this work was the preparation and characterization of silver, titanium dioxide and chitosan polyurethane-based coatings. Coatings with the three antibacterials were prepared using different deposition techniques, using a brush or a bar coater automatic film applicator, and compared to solvent casted films prepared with the same components. For silver containing materials, an innovative strategy contemplating the use and preparation of silver nanoparticles in a single step-method was employed. This preparation was obtained starting from a silver precursor and using a single compound as the reducing agent and stabilizer. Ultraviolet-visible spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, contact angle measurements and adhesion test experiments were used to characterize the prepared coatings. Promising antibacterial properties, measured via direct and indirect methods, were registered for all the silver-based materials.

Functional-modified polyurethanes for rendering surfaces antimicrobial: An overview

Antimicrobial surfaces and coatings are rapidly emerging as primary components in functional modification of materials and play an important role in addressing the problems associated with biofouling and microbial infection. Polyurethane (PU) consisting of alternating soft and hard segments has been one of the most important coating materials that have been widely applied in many fields due to its versatile properties. This review attempts to provide insight into the recent advances in antimicrobial polyurethane coatings or surfaces. According to different classes of antimicrobial components along with their antimicrobial mechanism, the synthesis pathways are presented systematically herein to afford polyurethane with antimicrobial properties. Also, the challenges and opportunities of antimicrobial PU coatings and surfaces are also discussed. This review will be beneficial to the exploitation and the further studies of antimicrobial polyurethane materials for a variety of applications.

Polyurethane-Based Composites: Effects of Antibacterial Fillers on the Physical-Mechanical Behavior of Thermoplastic Polyurethanes

The challenge to manufacture medical devices with specific antibacterial functions, and the growing demand for systems able to limit bacterial resistance growth, necessitates the development of new technologies which can be easily produced at an industrial level. The object of this work was the study and the development of silver, titanium dioxide, and chitosan composites for the realization and/or implementation of biomedical devices. Thermoplastic elastomeric polyurethane was selected and used as matrix for the various antibacterial functions introduced during the processing phase (melt compounding). This strategy was employed to directly incorporate antimicrobial agents into the main constituent material of the devices themselves. With the exception of the composite filled with titanium dioxide, all of the other tested composites were shown to possess satisfactory mechanical properties. The best antibacterial effects were obtained with all the composites against Staphylococcus aureus: viability was efficiently inhibited by the prepared materials in four different bacterial culture concentrations.

Antibacterial Nanocomposites Based on Thermosetting Polymers Derived from Vegetable Oils and Metal Oxide Nanoparticles

Thermosetting polymers derived from vegetable oils (VOs) exhibit a wide range of outstanding properties that make them suitable for coatings, paints, adhesives, food packaging, and other industrial appliances. In addition, some of them show remarkable antimicrobial activity. Nonetheless, the antibacterial properties of these materials can be significantly improved via incorporation of very small amounts of metal oxide nanoparticles (MO-NPs) such as TiO2, ZnO, CuO, or Fe3O4. The antimicrobial efficiency of these NPs correlates with their structural properties like size, shape, and mainly on their concentration and degree of functionalization. Owing to their nanoscale dimensions, high specific surface area and tailorable surface chemistry, MO-NPs can discriminate bacterial cells from mammalian ones, offering long-term antibacterial action. MO-NPs provoke bacterial toxicity through generation of reactive oxygen species (ROS) that can target physical structures, metabolic paths, as well as DNA synthesis, thereby leading to cell decease. Furthermore, other modes of action-including lipid peroxidation, cell membrane lysis, redox reactions at the NP-cell interface, bacterial phagocytosis, etc.-have been reported. In this work, a brief description of current literature on the antimicrobial effect of VO-based thermosetting polymers incorporating MO-NPs is provided. Specifically, the preparation of the nanocomposites, their morphology, and antibacterial properties are comparatively discussed. A critical analysis of the current state-of-art on these nanomaterials improves our understanding to overcome antibiotic resistance and offers alternatives to struggle bacterial infections in public places.

Synthesis of Cationic Waterborne Polyurethanes from Waste Frying Oil as Antibacterial Film Coatings

Cationic waterborne polyurethane (CWPU) was synthesized from waste frying oil and utilized as antibacterial film coatings. Waste oil-based monoglyceride was synthesized by the alcoholysis reaction of waste oil with glycerol, while CWPUs were prepared by esterification with methylenediphenyl 4,4′-diisocyanate (MDI) and bis(2-hydroxyethyl)dimethyl ammonium chloride (BHMAC) as an internal emulsifier. The effect of internal emulsifier contents on the chemical structures and properties of the obtained polyurethanes was studied. Bactericidal activity of the obtained polyurethanes toward Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was investigated using the time kill assay. CWPUs were successfully synthesized as confirmed by proton nuclear magnetic resonance spectroscopy (1H-NMR) and Fourier transform infrared spectroscopy (FT-IR). Effects of the internal emulsifier on particle size of CWPUs and mechanical properties of the resulting polyurethane films were investigated and measured by transmission electron microscopy (TEM). Particle size diameter of CWPUs ranged from 13.38 to 28.75 nm. The resulting polyurethane films were very pliable, with moderate adhesion and hardness. All films showed good resistance to water and diluted acid but poor resistance to dilute alkali. Obtained CWPUs provided excellent antibacterial activity, with efficiency increasing with increasing amount of BHMAC. Interestingly, antibacterial ability against S. aureus was more rapid than that against E. coli under similar conditions. Results offered an alternative utilization of waste frying oil as a sustainable raw material for the preparation of value-added polymers in the chemical industry.

Production and characterization of bactericidal wound dressing material based on gelatin nanofiber

Gelatin is a biocompatible and biodegradable natural polymer obtained by collagen. Gelatin nanofibers meet all the necessary requirements when used as wound dressing material. However, their lack of antimicrobial properties limits their use. The purpose of this study is to expand the field of use of gelatin by providing it with antimicrobial properties. For this purpose, poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride) (PMETAC), was used. In this study, the polymers were dissolved in formic acid-acetic acid and nanofibers were synthesized by electrospinning. The obtained nanofibers were characterized with SEM, FTIR, and TGA. The antibacterial effect, degradation tests, and cell viability, adhesion and proliferation were investigated. The SEM studies show that the nanofibers are homogeneous and smooth. At the end of 14 days, all nanofibers lost >90% of their mass. The nanofibers containing PMETAC showed good bactericidal activity against Staphylococcus aureus, Escherichia coli, methicillin-resistant Staphylococcus aureus and Acinetobacter baumannii. MTT test demonstrated that low doses of the nanofibers were biocompatible. The cell adhesion study has been shown that many cells attachment and proliferate on the surface of nanofibers. It has been found that the obtained nanofibers can be used safely and effectively as antimicrobial wound dressing material.

Antimicrobial wound dressings with high mechanical conformability prepared through thiol-yne click photopolymerization reaction

Radical mediated photochemical thiol-yne click polymerization of thiol-terminated polyurethane prepolymers, with poly(ethylene glycol) soft segment at two different molecular weights, a propargyl terminated urethane crosslinker and silver salt was utilized to prepare versatile wound dressings containing well-dispersed Ag° nanoparticles produced via in situ reduction of Ag⁺ ions. The dressings with optimized chemical structure showed desirable fluid handling capacity (up to 4.84 g/10 cm² d^-1) to provide moist environment over damaged tissue. They were permeable to oxygen and carbon dioxide, therefore, the processes related to tissue regeneration of wound bed could be continued without problem. Their appropriate tensile strength (up to 3.87 MPa) and suitable conformability (less than 0.1% permanent set) enabled protection of damaged skin tissue from external physical forces during the healing process, even for wounds present at organs with a high degree of freedom. The proper cytocompatibility of the prepared dressings and their ability to support growth and proliferation of fibroblast cells as determined by wound scratch healing assay showed the potential utility of the dressings to motivate wound healing progression by migration of cells to the damaged area. In addition, these dressings with in situ formed silver nanoparticles exhibited promising antimicrobial activity against different bacterial and fungal strains, and consequently could encourage wound healing process by prevention from infection in the wound site.

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme.

Polyurethane Foams: Past, Present, and Future

Polymeric foams can be found virtually everywhere due to their advantageous properties compared with counterparts materials. Possibly the most important class of polymeric foams are polyurethane foams (PUFs), as their low density and thermal conductivity combined with their interesting mechanical properties make them excellent thermal and sound insulators, as well as structural and comfort materials. Despite the broad range of applications, the production of PUFs is still highly petroleum-dependent, so this industry must adapt to ever more strict regulations and rigorous consumers. In that sense, the well-established raw materials and process technologies can face a turning point in the near future, due to the need of using renewable raw materials and new process technologies, such as three-dimensional (3D) printing. In this work, the fundamental aspects of the production of PUFs are reviewed, the new challenges that the PUFs industry are expected to confront regarding process methodologies in the near future are outlined, and some alternatives are also presented. Then, the strategies for the improvement of PUFs sustainability, including recycling, and the enhancement of their properties are discussed.

Characterization and in vitro Biocompatibility of Binary Mixtures of Chitosan and Polyurethanes Synthesized from Chemically Modified Castor Oil, as Materials for Medical Use

This study aimed to evaluate the effect of the incorporation of chitosan into polyurethane matrices synthesized from chemically modified castor (Ricinus communis) oil by transesterification with pentaerythritol. An additional aim of this study was to determine the degree of acceptance as a biomaterial (obtained from renewable sources), based on the analysis of its mechanical properties (stress/rupture strain), hydrophilic character (contact angle), morphology (SEM) and in vitro compatibility of polyurethanes when in contact with mouse fibroblast L929 cells. No significant changes in mechanical properties were observed with the addition of chitosan to polyurethanes synthesized from chemically modified castor oil. All polyurethane formulas showed morphological changes with increased chitosan concentration. As chitosan/polyurethane binary mixtures do not present a cytotoxicity risk for L929 mouse fibroblasts and possess similar mechanical properties to soft and cardiovascular tissues, their use as a biomedical material is suggested.

Effect of chemical structure on properties of polyurethanes: Temperature responsiveness and biocompatibility

Polyurethanes are known as one of the most biocompatible and inherently blood-compatible materials and have a wide range of applications in the medical field due to their controllable structure and properties. Durability, elasticity, elastomeric structure, fatigue resistance, versatility, and easy acceptance by the biological media after the application makes these polymers preferable in medical area. In this study, polyurethane films were prepared using poly(propylene-ethylene glycol) and either toluene-2,4-diisocyanate or 4,4′-methylenediphenyl diisocyanate without adding any other ingredients such as solvent, catalyst, or chain extender to prevent negative effects of leachable molecules. Mechanical tests were performed at room temperature while swelling tests were conducted in water and phosphate-buffered saline at 4°C, 25°C, and 37°C. Temperature responsiveness was observed for the samples synthesized using toluene-2,4-diisocyanate and poly(propylene-ethylene glycol). These samples had more than 100% swelling at 4°C and about 4% swelling at 25°C and 37°C. Cytocompatibility tests were performed by culturing the samples and their extracts with mouse fibroblast cells (L929). Viability of human umbilical vein endothelial cells was studied to examine the compatibility of the films for blood contacting devices. Both toluene-2,4-diisocyanate and 4,4-methylenediphenyl diisocyanate–based polyurethane films showed no cytotoxic effect and good biocompatibility. Oxygen plasma treatment enhanced hydrophilicity of the films. After plasma treatment, human umbilical vein endothelial cell attachment on toluene-2,4-diisocyanate–based polyurethane films improved and 4,4-methylenediphenyl diisocyanate–based polyurethane films maintained their high cell affinity. Polyurethanes presenting temperature responsiveness, high biocompatibility, and high affinity for human umbilical vein endothelial cells were synthesized in medical purity and in a reaction media involving only diisocyanate and diol components without addition of any solvent, chain extender, or catalyst. Polyurethanes with these properties and as produced in this study are reported for the first time in the literature.

Strategies to prevent the occurrence of resistance against antibiotics by using advanced materials

Drug resistance occurrence is a global healthcare concern responsible for the increased morbidity and mortality in hospitals, time of hospitalisation and huge financial loss. The failure of the most antibiotics to kill "superbugs" poses the urgent need to develop innovative strategies aimed at not only controlling bacterial infection but also the spread of resistance. The prevention of pathogen host invasion by inhibiting bacterial virulence and biofilm formation, and the utilisation of bactericidal agents with different mode of action than classic antibiotics are the two most promising new alternative strategies to overcome antibiotic resistance. Based on these novel approaches, researchers are developing different advanced materials (nanoparticles, hydrogels and surface coatings) with novel antimicrobial properties. In this review, we summarise the recent advances in terms of engineered materials to prevent bacteria-resistant infections according to the antimicrobial strategies underlying their design.

A new textured polyphosphazene biomaterial with improved blood coagulation and microbial infection responses

A new poly[bis(octafluoropentoxy) phosphazene] (OFP) was synthesized for the purpose of blood contacting medical devices. OFP was further either developed into crosslinkable polyphosphazene (X-OFP) or blended with polyurethane (PU) as the mixture (OFP/PU) for improvement of mechanical property of polyphosphazene polymers. All the materials were fabricated as smooth films or further textured with submicron pillars for the assay of antimicrobial and antithrombotic properties. Results showed that crosslinkable OFP (X-OFP) and blends of OFP/PU successfully improved the mechanical strength of OFP and fewer defects of pillars were found on the textured polyphosphazene surfaces. The antithrombotic experiments showed that polyphosphazene OFP materials reduced human Factor XII activation and platelet adhesion, thereby being resistant to plasma coagulation and thrombosis. The bacterial adhesion and biofilm experiments demonstrated that OFP materials inhibited staphylococcal bacterial adhesion and biofilm formation. The surface texturing further reduced the platelet adhesion and bacterial adhesion, and inhibited biofilm formation up to 23 days. The data suggested that textured OFP materials may provide a practical approach to improve the biocompatibility of current biomaterials in the application of blood contacting medical devices with significant reduction in risk of pathogenic infection and thrombosis.

STATEMENT OF SIGNIFICANCE

The thromboembolic events and microbial infection have been the significant barriers for the long term use of biomaterials in blood-contacting medical devices. The development of new materials with multiple functions including anti-thrombosis and antibacterial surfaces is a high research priority. This study synthesized new biostable and biocompatible polyphosphazene polymers, poly[bis(octafluoropentoxy)phosphazene] (OFP) and crosslinkable OFP, and successfully improved the mechanical strength of polyphosphazenes. Polymers were fabricated into textured films with submicron pillars on the surfaces. The antimicrobial and antithrombotic assays demonstrated that new materials combined with surface physical modification have significant reduction in risk of pathogenic infection and thrombosis, and improve the biocompatibility of current biomaterials in the application of blood-contacting medical devices. It would be interest to biomaterials and bioengineering related communities.

Antibacterial and Biocompatible Cross-Linked Waterborne Polyurethanes Containing Gemini Quaternary Ammonium Salts

A cross-linked waterborne polyurethane (CPTMGPU) with long-term stability was developed from poly(ethylene glycol) (PEG), polyoxytetramethylene glycol (PTMG), isophorone diisocyanate (IPDI), l-lysine, and its derivative diamine consisting of gemini quaternary ammonium salt (GQAS), using ethylene glycol diglycidyl ether (EGDE) as a cross-linker. Weight loss test, X-ray photoelectron spectroscopy (XPS) measurements, and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were performed to prove the surface structure and stability of these CPTMGPU films. Furthermore, the GQAS-bearing CPTMGPUs show repeatable contact-active antibacterial efficacy against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria and do not show any inhibition effect against fibroblasts in vitro. After subcutaneous implantation in rats, the CPTMGPU films manifest good biocompatibility in vivo, despite the presence of a typical foreign body reaction toward surrounding tissues and mild systematic inflammation reaction that could be eliminated after a short implantation period, as demonstrated by histology and immunohistochemistry combined with interleukin (IL)-1β, IL-4, IL-6, IL-10, and TNF-α analysis though enzyme-linked immunosorbent assay (ELISA) and real-time quantitative polymerase chain reaction (qRT-PCR). Therefore, these cross-linked waterborne polyurethanes hold great promise for antibacterial applications in vivo.

Substrate-Independent Ag-Nanoparticle-Loaded Hydrogel Coating with Regenerable Bactericidal and Thermoresponsive Antibacterial Properties

We report a Ag-nanoparticle (AgNP)-based substrate-independent bactericidal hydrogel coating with thermoresponsive antibacterial property. To attach the hydrogel coating onto model substrate, we first coated ene-functionalized dopamine on the substrate, and then the hydrogel thin layer was formed on the surface via the UV light initiated surface cross-linking copolymerization of N-isopropylacrylamide (NIPAAm) and sodium acrylate (AANa). Then, Ag ions were adsorbed into the hydrogel layers and reduced to AgNPs by sodium borohydride. The coating showed robust bactericidal ability against Escherichia coli and Staphylococcus aureus toward both contacted bacteria and the bacteria in the surrounding. Upon a reduction of the temperature below the LCST of PNIPAAm, the improved surface hydrophilicity and swollen PNIPAAm could detach the attached dead bacteria. Meanwhile, the long-lasting and regenerable antibacterial properties could be achieved by repeatedly loading AgNPs. By precisely controlling the AgNP loading amounts, the coating showed excellent hemocompatibility and no cytotoxity. Additionally, the coating could be applied to modify cell culture plate, since it could support cell adhesion and proliferation at 37 °C, while detach the cell by changing the temperature below lower critical solution temperature without the treatment of proteases. The study thus presents a promising way to fabricate thermoresponsive and regenerable antibacterial surfaces on diverse materials and devices for biomedical applications.