Effect of implantation of biodegradable magnesium alloy on BMP-2 expression in bone of ovariectomized osteoporosis rats

Hair and Serum Trace Element and Mineral Levels Profiles in Women with Premenopausal and Postmenopausal Osteoporosis

The objective of the present study was to evaluate serum and hair trace element and mineral levels in women with osteoporosis, as well as to estimate the impact of menopausal status on the profile of trace element and mineral status in women with osteoporosis. 207 women with diagnosed osteoporosis 22-85 years-of-age, and 197 healthy women of the respective age participated in the present study. Analysis of the levels of mineral and trace element in hair and serum samples was performed by inductively-coupled plasma mass-spectrometry (ICP-MS). Women with osteoporosis were characterized by significantly lower hair Ca, Mg, Co, I, Li, and Mn levels, as well as serum Ca, Mg, Co, Fe, V, and Zn concentrations compared to women in the control group. After additional grouping according to menopausal status, the lowest hair Ca and Mg content was observed in postmenopausal osteoporotic women, whereas serum Ca and Mg concentrations were the lowest in premenopausal osteoporotic women. Hair Co, Mn, and Zn levels in postmenopausal osteoporotic women were lower than in healthy postmenopausal women. The lowest circulating Zn levels were observed in osteoporotic postmenopausal women. Taken together, decreased hair and serum levels in osteoporotic women are indicative of increased risk of Ca, Mg, Co, and Zn deficiency in women with osteoporosis. In turn, alterations in hair trace element and mineral levels in osteoporosis are more profound in postmenopausal women. Hypothetically, improvement in trace element and mineral metabolism especially in postmenopausal women may be considered as a potential strategy for mitigating osteoporosis.

Advances in materials used for minimally invasive treatment of vertebral compression fractures

Vertebral compression fractures are becoming increasingly common with aging of the population; minimally invasive materials play an essential role in treating these fractures. However, the unacceptable processing-performance relationships of materials and their poor osteoinductive performance have limited their clinical application. In this review, we describe the advances in materials used for minimally invasive treatment of vertebral compression fractures and enumerate the types of bone cement commonly used in current practice. We also discuss the limitations of the materials themselves, and summarize the approaches for improving the characteristics of bone cement. Finally, we review the types and clinical efficacy of new vertebral implants. This review may provide valuable insights into newer strategies and methods for future research; it may also improve understanding on the application of minimally invasive materials for the treatment of vertebral compression fractures.

Risk factors for the comorbidity of osteoporosis/osteopenia and kidney stones: a cross-sectional study

Low femoral neck bone mineral density (BMD) was associated with the increased risk of kidney stones. Low dietary magnesium intake and increased serum alkaline phosphatase were associated with the increased risk of low femoral neck BMD in kidney stone formers.

PURPOSE

To evaluate whether low femoral neck bone mineral density (BMD) was associated with a higher risk of kidney stones, and identify risk factors for the comorbidity of osteoporosis/osteopenia and kidney stones.

METHODS

We analyzed individuals aged ≥ 20 years from National Health and Nutrition Examination Survey 2007-2020 data. Osteoporosis/osteopenia is defined as any T-score < -1.0 of femoral neck, total femoral, and mean lumbar spine (L1-L4) BMD. Dietary intakes (sodium, potassium, magnesium, calcium, phosphorus, calcium/phosphorus, vitamin D (25OHD2+25OHD3)) and serum parameters (sodium, potassium, calcium, phosphorus, bicarbonate, vitamin D, alkaline phosphatase (ALP)) were screened for identifying risk factors for the comorbidity.

RESULTS

The prevalence of comorbidity of osteoporosis/osteopenia and kidney stones was 4.82%. Femoral neck BMD T-score was negatively associated with the prevalence of kidney stones (n=11,864). Dietary magnesium intake, serum phosphorus, and bicarbonate were negatively associated with the comorbidity prevalence, and serum ALP was positively associated with the comorbidity prevalence (n=6978). Additionally, there remain significant associations of dietary magnesium intake, serum ALP, and bicarbonate with not only femoral neck BMD T-score (n=11331), but also the prevalence of kidney stones (n=23,111) in general population. Furthermore, dietary magnesium intake was positively correlated to femoral neck BMD T-score in stone formers (SFs), while serum ALP was negatively correlated to femoral neck BMD T-score in SFs (n=1163).

CONCLUSION

Low femoral neck BMD was closely associated with an increased risk of kidney stones. Low magnesium intake and increased serum ALP were associated with the increased risk of the comorbidity, as well as indicative of low femoral neck BMD T-score in SFs, which offered a clue to further clarify the mechanism leading to paradoxical calcification of bone resorption and kidney stones, and had the potential to perform personalized diagnostic workup for low BMD in SFs.

The Role of Trace Elements and Minerals in Osteoporosis: A Review of Epidemiological and Laboratory Findings

The objective of the present study was to review recent epidemiological and clinical data on the association between selected minerals and trace elements and osteoporosis, as well as to discuss the molecular mechanisms underlying these associations. We have performed a search in the PubMed-Medline and Google Scholar databases using the MeSH terms "osteoporosis", "osteogenesis", "osteoblast", "osteoclast", and "osteocyte" in association with the names of particular trace elements and minerals through 21 March 2023. The data demonstrate that physiological and nutritional levels of trace elements and minerals promote osteogenic differentiation through the up-regulation of BMP-2 and Wnt/β-catenin signaling, as well as other pathways. miRNA and epigenetic effects were also involved in the regulation of the osteogenic effects of trace minerals. The antiresorptive effect of trace elements and minerals was associated with the inhibition of osteoclastogenesis. At the same time, the effect of trace elements and minerals on bone health appeared to be dose-dependent with low doses promoting an osteogenic effect, whereas high doses exerted opposite effects which promoted bone resorption and impaired bone formation. Concomitant with the results of the laboratory studies, several clinical trials and epidemiological studies demonstrated that supplementation with Zn, Mg, F, and Sr may improve bone quality, thus inducing antiosteoporotic effects.

Magnesium Picolinate Improves Bone Formation by Regulation of RANK/RANKL/OPG and BMP-2/Runx2 Signaling Pathways in High-Fat Fed Rats

Magnesium (Mg) deficiency may affect bone metabolism by increasing osteoclasts, decreasing osteoblasts, promoting inflammation/oxidative stress, and result in subsequent bone loss. The objective of the present study was to identify the molecular mechanism underlying the bone protective effect of different forms of Mg (inorganic magnesium oxide (MgO) versus organic magnesium picolinate (MgPic) compound) in rats fed with a high-fat diet (HFD). Forty-two Wistar albino male rats were divided into six group (n = 7): (i) control, (ii) MgO, (iii) MgPic, (iv) HFD, (v) HFD + MgO, and (vi) HFD + MgPic. Bone mineral density (BMD) increased in the Mg supplemented groups, especially MgPic, as compared with the HFD group (p < 0.001). As compared with the HFD + MgO group, the HFD + MgPic group had higher bone P (p < 0.05) and Mg levels (p < 0.001). In addition, as compared to MgO, MgPic improved bone formation by increasing the levels of osteogenetic proteins (COL1A1 (p < 0.001), BMP2 (p < 0.001), Runx2 (p < 0.001), OPG (p < 0.05), and OCN (p < 0.001), IGF-1 (p < 0.001)), while prevented bone resorption by reducing the levels of RANK and RANKL (p < 0.001). In conclusion, the present data showed that the MgPic could increase osteogenic protein levels in bone more effectively than MgO, prevent bone loss, and contribute to bone formation in HFD rats.

Enhanced mechanical and biological performances of CaO-MgO-SiO2 glass-ceramics via the modulation of glass and ceramic phases

This work reports a new CaO-MgO-SiO₂ (CMS) bioactive glass-ceramic, using ZrO₂ as a nucleus to modulate the ratios of glass and ceramic phases as a function of sintering temperature. Mg-rich bioactive CMS glass-ceramics exhibit advantages regarding mechanical strength (flexural strength ~190 MPa and compressive strength ~555 MPa), in-vitro and in-vivo biocompatibilities, and bone ingrowth. The high mechanical strengths could be attributed to the CaMgSi₂O₆ glass-ceramic and lower porosity. X-ray absorption spectra indicate an increased SiO covalent bond via the development of CaMgSi₂O₆ glass-ceramics. From the in-vitro cytotoxicity and BMSC differentiation assays, the CMS samples sintered above 800 °C exhibited better cell attachment and differentiation, possibly due to structural stability, appropriate pore, and ion release to boost osteogenesis. Compared to hydroxyapatite (HA) ceramics, the CMS glass-ceramics display higher mechanical strengths, biocompatibility, and osteoconductivity. An in-vivo experiment demonstrated a fine bone-ingrowth profile around the CMS implant. This study may further the application of CMS glass-ceramics in bone implants.

Lactobacillus-fermented milk products attenuate bone loss in an experimental rat model of ovariectomy-induced post-menopausal primary osteoporosis

AIM

In this study, we investigated the anti-osteoporotic effect of two fermented milk products (FMPs) fermented by Lactobacillus plantarum A41 and Lactobacillus fermentum SRK414 on a rat model of ovariectomy-induced post-menopausal primary osteoporosis.

METHODS AND RESULTS

The two Lactobacillus FMPs increased the bone volume and bone mineral density (BMD) in ovariectomized (OVX) rats, and normalized the bone biomarkers in the serum. Additionally, they altered the gene expression levels of bone-metabolism-related markers. Furthermore, the two Lactobacillus FMPs downregulated bone-apoptosis-related genes stimulated by ovariectomy. Interestingly, the Lactobacillus FMPs decreased the levels of inflammation markers in the serum, bone, ileum and colon of the rats. Gut bacterial populations were also affected upon FMP treatment due to increase in the abundance of the genus Lactobacillus and Faecalibacterium prausnitzii.

CONCLUSIONS

Milk products fermented by L. plantarum A41 and L. fermentum SRK414 can exhibit anti-osteoporotic effects on post-menopausal osteoporosis via regulating the expression of bone-metabolism-related markers.

SIGNIFICANCE AND IMPACT OF THE STUDY

The two Lactobacillus FMPs used in the study can be an ideal method that has its potential of treating post-menopausal osteoporosis instead of drug treatments.

Osteogenic Effect of a Biodegradable BMP-2 Hydrogel Injected into a Cannulated Mg Screw

Cannulated screws, containing an internal hole for inserting a guide pin, are commonly used in the management of bone fractures. Cannulated Mg screws can be biodegraded easily because their increased surface area including that of the inner hole rapidly reacts with body fluids. To delay biodegradation of cannulated Mg screws and improve bone regeneration, we developed a specific type of screw by injecting it with gelatin hydrogels [10 wt % gelatin_(gel) with 0.09 v/v % glutaraldehyde (cross-linker)] containing different concentrations (5, 10, or 25 μg/mL) of bone morphogenic proteins (BMPs). We analyzed the properties and biocompatibility of the screws with and without BMP-2 and found that the release rate of BMP-2 in the hydrogel changed proportionately with the degradation rate of the cross-linked hydrogel. Loading BMP-2 in the hydrogel resulted in sustained release of BMP-2 for 25 to 40 days or more. The degradation rate of BMP-2 hydrogels was inversely proportional to the concentration of BMP-2. The injection of the hydrogels in the cannulated screw delayed biodegradation inside of the screw by simulated body fluid. It also induced uniform corrosion and the precipitation of bioactive compounds onto the surface of the screw. In addition, osteoblast proliferation was very active near the BMP-2 hydrogels, depending on the BMP-2 concentration. The BMP-2 in the hydrogel improved cell differentiation. The cannulated screw injected with 10 μL/mL BMP-2 hydrogel prevented implant biodegradation and enhanced osteoconduction and osteointegration inside and outside the screw. In addition, the properties of BMP-2-loaded hydrogels can be changed by controlling the amount of the cross-linker and protein, which could be useful for tissue regeneration in other fields.

Supplementation of nanofiltrated deep ocean water ameliorate the progression of osteoporosis in ovariectomized rat via regulating osteoblast differentiation

Magnesium was reported to be necessary for bone formation. Previous study indicated nanofiltrated deep ocean water (DOW) rich in magnesium. This study investigated the potential mechanisms of DOW in ameliorating osteoporosis. Briefly, female Sprague-Dawley rat was ovariectomized and fed with 0.35, 0.7, or 1.4 ml/kg of DOW daily for 8 weeks. In the results, DOW increased bone density, decreased trabecular bone loss, and decreased bone adiposity. DOW improved bone mass by examining structure in micro-computed tomography. About 0.35 and 0.7 ml/kg of DOW can increase protein expression of runt-related transcription factor 2 (RUNX2), an essential transcription factor for regulating osteoblast differentiation, by 9.4% or 12.9%. In human osteoblast, DOW increased the levels of osteocalcin, RUNX2, and alkaline phosphatase; all the proteins can regulate osteoblast differentiation. Considering the results of in vivo and in vitro study, DOW can ameliorate ovareictomy-caused osteoporosis via regulating the osteoblast differentiation, thereby, maintenance of bone structure. PRACTICAL APPLICATIONS: In addition to calcium, magnesium is essential to promoting the deposition of calcium in bones and regulating its transport; it may also slow the progression of osteoporosis. Nanofiltrated DOW contains abundant magnesium along with several microelements and peptides. In this study, a product was developed for decelerating osteoporosis by using an estrogen depletion model. DOW regulates osteoblast differentiation and thus prevents osteoporosis. This finding provides an alternative healthy source of bone supplements. In addition to tablets or capsules, aqueous supplements can be produced to achieve osteoporosis prevention. This finding is beneficial to the health-care industry for developing sustainable supplements.

Corrosion Resistance and Biocompatibility Assessment of a Biodegradable Hydrothermal-Coated Mg-Zn-Ca Alloy: An in Vitro and in Vivo Study

A hydrothermal (HT) coating was applied to the biomedical Mg-Zn-Ca alloy surface by microarc oxidation (MAO) and heat treatment. Then, the corrosion resistance and biocompatibility of the coated alloy was evaluated in vitro and in vivo. The corrosion rate (CR) of HT-coated implants was significantly lower in experiment. In addition, this CR increased over time in vivo but was stable, albeit higher, in vitro. The proliferation, adhesion, and live activity of bone marrow stem cells (BMSCs) were significantly greater on the surface of the HT-coated Mg alloy in vitro. Serum Mg²⁺ was always within the normal range in rabbits with implants, although Ca²⁺ was higher than normal for both uncoated and coated scaffolds. There were no significant pathological effects on the main organs of alloy-implanted rabbits compared with healthy animals. Thus, the HT coating significantly improved the corrosion resistance and biocompatibility of the Mg-Zn-Ca alloy.

Assessment of the degradation rates and effectiveness of different coated Mg-Zn-Ca alloy scaffolds for in vivo repair of critical-size bone defects

Surgical repair of bone defects remains challenging, and the search for alternative procedures is ongoing. Devices made of Mg for bone repair have received much attention owing to their good biocompatibility and mechanical properties. We developed a new type of scaffold made of a Mg-Zn-Ca alloy with a shape that mimics cortical bone and can be filled with morselized bone. We evaluated its durability and efficacy in a rabbit ulna-defect model. Three types of scaffold-surface coating were evaluated: group A, no coating; group B, a 10-μm microarc oxidation coating; group C, a hydrothermal duplex composite coating; and group D, an empty-defect control. X-ray and micro-computed tomography(micro-CT) images were acquired over 12 weeks to assess ulnar repair. A mechanical stress test indicated that bone repair within each group improved significantly over time (P < 0.01). The degradation behavior of the different scaffolds was assessed by micro-CT and quantified according to the amount of hydrogen gas generated; these measurements indicated that the group C scaffold better resisted corrosion than did the other scaffold types (P < 0.05). Calcein fluorescence and histology revealed that greater mineral densities and better bone responses were achieved for groups B and C than for group A, with group C providing the best response. In conclusion, our Mg-Zn-Ca-alloy scaffold effectively aided bone repair. The group C scaffold exhibited the best corrosion resistance and osteogenesis properties, making it a candidate scaffold for repair of bone defects.

The "Magnesium Sacrifice" Strategy Enables PMMA Bone Cement Partial Biodegradability and Osseointegration Potential

Poly (methyl methacrylate) (PMMA)-based bone cements are the most commonly used injectable orthopedic materials due to their excellent injectability and mechanical properties. However, their poor biocompatibility and excessive stiffness may cause complications such as aseptic implant loosening and stress shielding. In this study, we aimed to develop a new type of partially biodegradable composite bone cement by incorporating magnesium (Mg) microspheres, known as "Mg sacrifices" (MgSs), in the PMMA matrix. Being sensitive to the physiological environment, the MgSs in PMMA could gradually degrade to produce bioactive Mg ions and, meanwhile, result in an interconnected macroporous structure within the cement matrix. The mechanical properties, solidification, and biocompatibility, both in vitro and in vivo, of PMMA⁻Mg bone cement were characterized. Interestingly, the incorporation of Mg microspheres did not markedly affect the mechanical strength of bone cement. However, the maximum temperature upon setting of bone cement decreased. This partially biodegradable composite bone cement showed good biocompatibility in vitro. In the in vivo study, considerable bony ingrowth occurred in the pores upon MgS degradation. Together, the findings from this study indicate that such partially biodegradable PMMA⁻Mg composite may be ideal bone cement for minimally invasive orthopedic surgeries such as vertebroplasty and kyphoplasty.

Biofunctional Mg coating on PEEK for improving bioactivity

High purity Mg was successfully coated on polyetheretherketone (PEEK) by vapor deposition method in order to improve the bioactivity including antibacterial property of PEEK implant. The morphology and elemental composition of the coating were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), showing that the coating was mainly composed of Mg at deposition temperature of 175 °C, 185 °C, 200 °C and 230 °C. The higher the substrate temperature was, the larger the Mg particle size was. The coating degraded and gradually peeled off from the surface of PEEK after up to 21 days' immersion. It was found that the degradation of Mg coating could strongly kill Staphylococcus aureus with antibacterial rate reaching to 99%. Mg can be expected to be coated on those bio-inert biomaterials to offer specific bioactivities.

•

High purity Mg was coated on PEEK by vapor deposition method.

•

The Mg coating degraded and gradually peeled off from the surface of PEEK after up to 21 days immersion.

•

The degradation of Mg coating could strongly kill Staphylococcus aureus with antibacterial rate reaching to 99%.

Cytotoxicity assessment of adipose-derived mesenchymal stem cells on synthesized biodegradable Mg-Zn-Ca alloys

Magnesium (Mg)-based alloys have been extensively considered as biodegradable implant materials for orthopedic surgery. Mg and its alloys are metallic biomaterials that can degrade in the body and promote new bone formation. In this study, the corrosion behavior and cytotoxicity of Mg-Zn-Ca alloys are evaluated with adipose-derived mesenchymal stem cells (ASCs). Mg-2Zn and Mg-2Zn-xCa (x=1, 2 and 3wt.%) alloys were designated. Mg alloys were analyzed with scanning electron microscopy and potentiodynamic polarization. To understand the in-vitro biocompatibility and cytotoxicity of Mg-2Zn and Mg-2Zn-xCa alloys, ASCs were cultured for 24 and 72h in contact with 10%, 50% and 100% extraction of all alloys prepared in DMEM. Cell cytotoxicity and viability of ASCs were examined by MTT assay. Alloying elements including Zn and Ca improved the corrosion resistance of alloys were compared with pure Mg. The cytotoxicity results showed that all alloys had no significant adverse effects on cell viability in 24h. After 72h, cell viability and proliferation increased in the cells exposed to pure Mg and Mg-2Zn-1Ca extracts. The release of Mg, Zn and Ca ions in culture media had no toxic impacts on ASCs viability and proliferation. Mg-2Zn-1Ca alloy can be suggested as a good candidate to be used in biomedical applications.

High-purity magnesium interference screws promote fibrocartilaginous entheses regeneration in the anterior cruciate ligament reconstruction rabbit model via accumulation of BMP-2 and VEGF

Interference screw in the fixation of autologous tendon graft to the bone tunnel is widely accepted for the reconstruction of anterior cruciate ligament (ACL), but the regeneration of fibrocartilaginous entheses could hardly be achieved with the traditional interference screw. In the present work, biodegradable high-purity magnesium (HP Mg) showed good cytocompatibility and promoted the expression of bone morphogenetic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF), fibrocartilage markers (Aggrecan, COL2A1 and SOX-9), and glycosaminoglycan (GAG) production in vitro. The HP Mg screw was applied to fix the semitendinosus autograft to the femoral tunnel in a rabbit model of ACL reconstruction with titanium (Ti) screw as the control. The femur-tendon graft-tibia complex was retrieved at 3, 6, 9 and 12 weeks. Gross observation and range of motion (ROM) of the animal model reached normal levels at 12 weeks. No sign of host reaction was found in the X-ray scanning. The HP Mg group was comparable to the Ti group with respect to biomechanical properties of the reconstructed ACL, and the ultimate load to failure and stiffness increased 12 weeks after surgery. In the histological analysis, the HP Mg group formed distinct fibrocartilage transition zones at the tendon-bone interface 12 weeks after surgery, whereas a disorganized fibrocartilage layer was found in the Ti group. In the immunohistochemical analysis, highly positive staining of BMP-2, VEGF and the specific receptor for BMP-2 (BMPR1A) was shown at the tendon-bone interface of the HP Mg group compared with the Ti group. Furthermore, the HP Mg group had significantly higher expression of BMP-2 and VEGF than the Ti group in the early phase of tendon-bone healing, followed by enhanced expression of fibrocartilage markers and GAG production. Therefore we proposed that the stimulation of BMP-2 and VEGF by Mg ions was responsible for the fibrochondrogenesis of Mg materials. HP Mg was promising as a biodegradable interference screw with the potential to promote fibrocartilaginous entheses regeneration in ACL reconstruction.

In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep model

The biocompatibility and the degradation behavior of the LAE442 magnesium-based intramedullary interlocked nailing system (IM-NS) was assessed in vivo in a comparative study (stainless austenitic steel 1.4441LA) for the first time. IM-NS was implanted into the right tibia (24-week investigation period; nails/screws diameter: 9 mm/3.5 mm, length: 130 mm/15-40 mm) of 10 adult sheep (LAE442, stainless steel, n=5 each group). Clinical and radiographic examinations, in vivo computed tomography (CT), ex vivo micro-computed tomography (μCT), mechanical and histological examinations and element analyses of alloying elements in inner organs were performed. The mechanical examinations (four-point bending) revealed a significant decrease of LAE442 implant stiffness, force at 0.2% offset yield point and maximum force. Periosteal (new bone formation) and endosteal (bone decline) located bone alterations occurred in both groups (LAE442 alloy more pronounced). Moderate gas formation was observed within the LAE442 alloy group. The CT-measured implant volume decreased slightly (not significant). Histologically a predominantly direct bone-to-implant interface existed within the LAE442 alloy group. Formation of a fibrous tissue capsule around the nail occurred in the steel group. Minor inflammatory infiltration was observed in the LAE442 alloy group. Significantly increased quantities of rare earth elements were detected in the LAE442 alloy group. μCT examination showed the beginning of corrosion in dependence of the surrounding tissue. After 24 weeks the local biocompatibility of LAE442 can be considered as suitable for a degradable implant material.

STATEMENT OF SIGNIFICANCE

An application oriented interlocked intramedullary nailing system in a comparative study (degradable magnesium-based LAE442 alloy vs. steel alloy) was examined in a sheep model for the first time. We focused in particular on the examination of implant degradation by means of (μ-)CT, mechanical properties (four-point bending), clinical compatibility, local bone reactions (X-ray and histology) and possible systemic toxicity (histology and element analyses of inner organs). A significant decrease of magnesium (LAE442 alloy) implant stiffness and maximum force occurred. Moderate not clinically relevant gas accumulation was determined. A predominantly direct bone-to-implant contact existed within the magnesium (LAE442 alloy) group compared to an indirect contact in the steel group. Rare earth element accumulation could be observed in inner organs but H&E staining was inconspicuous.

Probiotics (Bifidobacterium longum) Increase Bone Mass Density and Upregulate Sparc and Bmp-2 Genes in Rats with Bone Loss Resulting from Ovariectomy

Probiotics are live microorganisms that exert beneficial effects on the host, when administered in adequate amounts. Mostly, probiotics affect the gastrointestinal (GI) tract of the host and alter the composition of gut microbiota. Nowadays, the incidence of hip fractures due to osteoporosis is increasing worldwide. Ovariectomized (OVX) rats have fragile bone due to estrogen deficiency and mimic the menopausal conditions in women. Therefore, this study aimed to examine the effects of Bifidobacterium longum (B. longum) on bone mass density (BMD), bone mineral content (BMC), bone remodeling, bone structure, and gene expression in OVX rats. The rats were randomly assigned into 3 groups (sham, OVX, and the OVX group supplemented with 1 mL of B. longum 10⁸–10⁹ colony forming units (CFU)/mL). B. longum was given once daily for 16 weeks, starting from 2 weeks after the surgery. The B. longum supplementation increased (p < 0.05) serum osteocalcin (OC) and osteoblasts, bone formation parameters, and decreased serum C-terminal telopeptide (CTX) and osteoclasts, bone resorption parameters. It also altered the microstructure of the femur. Consequently, it increased BMD by increasing (p < 0.05) the expression of Sparc and Bmp-2 genes. B. longum alleviated bone loss in OVX rats and enhanced BMD by decreasing bone resorption and increasing bone formation.