Direct electrochemistry and electrocatalysis of hemoglobin in graphene oxide and ionic liquid composite film

Ionogels for flexible conductive substrates and their application in biosensing

Ionogels are highly conductive gels made from ionic liquids dispersed in a matrix made of organic or inorganic materials. Ionogels are known for high ionic conductivity, flexibility, high thermal and electrochemical stability. These characteristics make them suitable for sensing and biosensing applications. This review discusses about the two main constituents, ionic liquids and matrix, used to make ionogels and effect of these materials on the characteristics of ionogels. Here, the material properties like mechanical, electrochemical and stability are discussed for both polymer matrix and ionic liquid. We have briefly described about the fabrication methods like 3D printing, sol-gel, blade coating, spin coating, aerosol jet printing etc., used to make films or coating of these ionogels. The advantages and disadvantages of each method are also briefly summarized. Finally, the last section provides a few examples of application of flexible ionogels in areas like wearables, human-machine interface, electronic skin and detection of biological molecules.

Electroconductive bioplatform based on dextrin for the immobilization of hemoglobin: Application for electrochemical monitoring of H2O2

A novel biodegradable dextrin-based nanocomposite, involving polypyrrole (PPy) and hydrophilic dextrin (Dex) (PPy@Dex) was prepared using in-situ radical chemical polymerization technique. The obtained PPy@Dex bionanocomposite was fully characterized by FT-IR, XRD, FESEM, and DSC methods. The exceptional properties such as biocompatibility, high surface area, the proper functional group on the surface, and outstanding electrical conductivity of synthesized bionanocomposite made it a superior candidate over biomolecules immobilization. Electrochemical observations revealed that the PPy@Dex-coated glassy carbon electrode (GCE) demonstrated improved performance, making it a suitable substrate for immobilizing hemoglobin (Hb) and constructing an efficient biosensor. The resulting biosensor, named Hb-PPy@Dex/GCE, exhibited high activity in the reduction of hydrogen peroxide (H2O2). Amperometric examinations demonstrated an extensive linear range from 2 to 350 μM for Hb-PPy@Dex/GCE. The detection limit of the proposed approach was calculated to be 0.54 μM, following the S/N = 3 protocol.

Thalassemia and Nanotheragnostics: Advanced Approaches for Diagnosis and Treatment

Thalassemia is a monogenic autosomal recessive disorder caused by mutations, which lead to abnormal or reduced production of hemoglobin. Ineffective erythropoiesis, hemolysis, hepcidin suppression, and iron overload are common manifestations that vary according to genotypes and dictate, which diagnosis and therapeutic modalities, including transfusion therapy, iron chelation therapy, HbF induction, gene therapy, and editing, are performed. These conventional therapeutic methods have proven to be effective, yet have several disadvantages, specifically iron toxicity, associated with them; therefore, there are demands for advanced therapeutic methods. Nanotechnology-based applications, such as the use of nanoparticles and nanomedicines for theragnostic purposes have emerged that are simple, convenient, and cost-effective methods. The therapeutic potential of various nanoparticles has been explored by developing artificial hemoglobin, nano-based iron chelating agents, and nanocarriers for globin gene editing by CRISPR/Cas9. Au, Ag, carbon, graphene, silicon, porous nanoparticles, dendrimers, hydrogels, quantum dots, etc., have been used in electrochemical biosensors development for diagnosis of thalassemia, quantification of hemoglobin in these patients, and analysis of conventional iron chelating agents. This review summarizes the potential of nanotechnology in the development of various theragnostic approaches to determine thalassemia-causing gene mutations using various nano-based biosensors along with the employment of efficacious nano-based therapeutic procedures, in contrast to conventional therapies.

Transition metal copper composite ionic liquid self-built ratiometric sensor for the detection of paracetamol

In this paper, a MOF derivative Cu-PF₆-MOF composed of transition metal copper and ionic liquid [BMIM] PF₆ was used to construct a ratiometric electrochemical sensor for paracetamol detection. Cu-PF₆-MOF was synthesized by chemical bath method and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray Photoelectron Spectroscopy (XPS) and X-ray powder diffraction (XRD). Owing to the introduction of ionic liquid [BMIM] PF₆ and the synthetic effect on transition metal copper and ionic liquid [BMIM] PF₆, Cu-PF₆-MOF has the higher conductivity, larger electroactive surface area and better intrinsic catalytic properties of the skeletal transition metal, exhibiting enhanced electrocatalytic response to the reduction of paracetamol. The stable reduction peak at -104 mV was used as the ratiometric signal for analytical paracetamol detection using differential pulse voltammetry (DPV), with a linear range of 0.1-100 μM and a detection limit of 0.03 μM (S/N = 3). In addition, the constructed sensor showed good reproducibility, stability and interference resistance, as well as ideal recoveries (98.20%-104.40%) for the analysis of paracetamol in water samples.

PtNPs-GNPs-MWCNTs-β-CD nanocomposite modified glassy carbon electrode for sensitive electrochemical detection of folic acid

A novel electrochemical sensor, platinum nanoparticles/graphene nanoplatelets/multi-walled carbon nanotubes/β-cyclodextrin composite (PtNPs-GNPs-MWCNTs-β-CD) modified carbon glass electrode (GCE), was fabricated and used for the sensitive detection of folic acid (FA). The PtNPs-GNPs-MWCNTs-β-CD nanocomposite was easily prepared with an ultrasound-assisted assembly method, and it was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electrochemical behavior of FA at PtNPs-GNPs-MWCNTs-β-CD/GCE was investigated in detail. Some key experimental parameters such as pH, amount of PtNPs-GNPs-MWCNTs-β-CD composite, and scan rate were optimized. A good linear relationship (R² = 0.9942) between peak current of cyclic voltammetry (CV) and FA concentration in the range 0.02-0.50 mmol L^-1 was observed at PtNPs-GNPs-MWCNTs-β-CD/GCE. The detection limit was 0.48 μmol L^-1 (signal-to-noise ratio = 3). A recovery of 97.55-102.96% was obtained for the determination of FA in FA pills (containing 0.4 mg FA per pill) at PtNPs-GNPs-MWCNTs-β-CD/GCE, indicating that the modified electrode possessed relatively high sensitivity and stability for the determination of FA in real samples.

Revisiting the nitrite reductase activity of hemoglobin with differential pulse voltammetry

Nitric oxide (NO) is an omnipresent signalling molecule in all vertebrates. NO modulates blood flow and neural activity. Nitrite anion is one of the most important sources of NO. Nitrite is reduced to NO by various physiological mechanisms including reduction by hemoglobin in vascular system. In this study, nitrite reductase activity (NRA) of hemoglobin is reported using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in a wide potential window from +0.3 V to -1.3 V (vs. Ag/AgCl). To the best of our knowledge, a detailed look into NRA of hemoglobin is proposed here for the first time. Our results indicated two different regimes for reduction of nitrite by hemoglobin in its Fe(II) and Fe(I) states. Both reactions showed a reversible behaviour in the time scale of the experiments. The first reduction displayed a normal redox behaviour, while the latter one had the characteristics of a catalytic electro-reduction/oxidation. The reduction in Fe(II) state was selected as a tool for comparing the NRA of hemoglobin (Hb) and hemoglobin-S (Hb-S) under native-like conditions in a didodecyldimethyl ammonium bromide (DDAB) liquid crystal film. These investigations lay the prospects and guidelines for understanding the direct electrochemistry of hemoglobin utilizing a simplified mediator-free platform.

Synthesis and utilization of Co3O4 doped carbon nanofiber for fabrication of hemoglobin-based electrochemical sensor

In this paper cobalt oxide (Co₃O₄) nanoparticles were mixed with polyacrylonitrile to prepare Co₃O₄ doped carbon nanofiber (CNF) composite by electrospinning and carbonization, which was further used to modify on carbon ionic liquid electrode (CILE). Hemoglobin (Hb) was immobilized on Co₃O₄-CNF/CILE surface with Nafion acted as the protective film to fabricate an electrochemical biosensor (Nafion/Hb/Co₃O₄-CNF/CILE). Electrochemical behavior of Hb on the electrode was investigated with a pair of quasi-reversible redox peak appeared on cyclic voltammogram and electrochemical parameters were calculated. Moreover, this biosensor had good analytical capabilities for electrocatalytic reduction of different substrates including trichloroacetic acid, potassium bromate and sodium nitrite with wider detection range from 40.0 to 260.0 mmol L^-1, 0.1 to 48.0 mmol L^-1 and 1.0 to 12.0 mmol L^-1 by cyclic voltammetry, respectively. The proposed method showed excellent anti-interferences ability with good selectivity and was successful used for quantitative detection of real samples, which displayed the potential applications to develop into a new analytical device.

Investigation on direct electrochemical and electrocatalytic behavior of hemoglobin on palladium-graphene modified electrode

Palladium-graphene (Pd-GR) nanocomposite was acted as modifier for construction of the modified electrode with direct electrochemistry of hemoglobin (Hb) realized. By using Nafion as the immobilization film, Hb was fixed tightly on Pd-GR nanocomposite modified carbon ionic liquid electrode. Electrochemical behaviors of Hb modified electrode were checked by cyclic voltammetry and a pair of redox peaks originated from direct electron transfer of Hb was appeared. The Hb modified electrode had excellent electrocatalytic activity to the reduction of trichloroacetic acid and sodium nitrite in the concentration range from 0.6 to 13.0mmol·L^-1 and from 0.04 to 0.5 mmol·L^-1. Therefore Pd-GR nanocomposite was proven to be a good candidate for the fabrication of third-generation electrochemical biosensor.

Application of Carbon-Microsphere-Modified Electrodes for Electrochemistry of Hemoglobin and Electrocatalytic Sensing of Trichloroacetic Acid

By using the hydrothermal method, carbon microspheres (CMS) were fabricated and used for electrode modification. The characteristics of CMS were investigated using various techniques. The biocompatible sensing platform was built by immobilizing hemoglobin (Hb) on the micrometer-sized CMS-modified electrode with a layer of chitosan membrane. On the cyclic voltammogram, a couple of quasi-reversible cathodic and anodic peaks appeared, showing that direct electrochemistry of Hb with the working electrode was achieved. The catalytic reduction peak currents of the bioelectrode to trichloroacetic acid was established in the linear range of 2.0~70.0 mmol·L⁻¹ accompanied by a detection limit of 0.30 mmol·L⁻¹ (3σ). The modified electrode displayed favorable sensitivity, good reproducibility and stability, which suggests that CMS is promising for fabricating third-generation bioelectrochemical sensors.

TiO2 nanoparticle modified organ-like Ti3C2 MXene nanocomposite encapsulating hemoglobin for a mediator-free biosensor with excellent performances

TiO2 nanoparticle modified organ-like Ti3C2 MXene (TiO2-Ti3C2) nanocomposite has been synthesized and then used to immobilize hemoglobin (Hb) to fabricate a mediator-free biosensor. The morphology and structure of TiO2-Ti3C2 nanocomposite were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Spectroscopic and electrochemical results revealed that TiO2-Ti3C2 nanocomposite is an excellent immobilization matrix with biocompatibility for redox protein, affording good protein bioactivity and stability. Due to the special organ-like hybrid structure of TiO2-Ti3C2, the direct electron transfer of Hb is facilitated and the prepared biosensors displayed good performance for the detection of H2O2 with a wide linear range of 0.1-380 μM for H2O2 (sensitivity of 447.3 μA mM(-1) cm(-2)), an extremely low detection limit of 14 nM for H2O2. Especially, numerous TiO2 nanoparticles with excellent biocompatibility on the surface of the nanocomposite may provide a protective microenvironment for Hb to make the prepared biosensor improve long-term stability. The TiO2-Ti3C2 based biosensor retains 94.6% of the initial response to H2O2 after 60-day storage. TiO2-Ti3C2 nanocomposite could be a promising matrix for the fabrication of mediator-free biosensors, and might find wide potential applications in environmental analysis and biomedical detection.

Direct electrochemistry of glucose oxidase on novel free-standing nitrogen-doped carbon nanospheres@carbon nanofibers composite film

We have proposed a novel free-standing nitrogen-doped carbon nanospheres@carbon nanofibers (NCNSs@CNFs) composite film with high processability for the investigation of the direct electron transfer (DET) of glucose oxidase (GOx) and the DET-based glucose biosensing. The composites were simply prepared by controlled thermal treatment of electrospun polypyrrole nanospheres doped polyacrylonitrile nanofibers (PPyNSs@PAN NFs). Without any pretreatment, the as-prepared material can directly serve as a platform for GOx immobilization. The cyclic voltammetry of immobilized GOx showed a pair of well-defined redox peaks in O2-free solution, indicating the DET of GOx. With the addition of glucose, the anodic peak current increased, while the cathodic peak current decreased, which demonstrated the DET-based bioelectrocatalysis. The detection of glucose based on the DET of GOx was achieved, which displayed high sensitivity, stability and selectivity, with a low detection limit of 2 μM and wide linear range of 12-1000 μM. These results demonstrate that the as-obtained NCNSs@CNFs can serve as an ideal platform for the construction of the third-generation glucose biosensor.

A novel electrochemical hydrogen peroxide biosensor based on hemoglobin capped gold nanoclusters–chitosan composite

In this work, the first direct electrochemistry of Hb-AuNCs and its electrocatalysis towards H₂O₂ in a biosensing system has been reported.