Antibacterial efficiency of vermiculite/chlorhexidine nanocomposites and results of the in vivo test of harmlessness of vermiculite

α-Fe2O3 Nanoparticles/Iron-Containing Vermiculite Composites: Structural, Textural, Optical and Photocatalytic Properties

Vermiculite two-dimensional mixed-layer interstratified structures are a very attractive material for catalysis and photocatalysis. The iron-containing vermiculite from the Palabora region (South Africa) and its samples, which calcined at 500 and 700 °C, were studied in comparison with the α-Fe2O3 nanoparticles/vermiculite composites for the first time as photocatalysts of methanol decomposition, which is an organic pollutant and an efficient source for hydrogen production. The aim of the work was to characterize their structural properties using X-ray fluorescence, X-ray diffraction, infrared spectroscopy, nitrogen physisorption, diffuse reflectance UV-Vis spectroscopy and photoluminescence spectroscopy to explain the photocatalytic effects. The photocatalytic test of the samples was performed in a batch photoreactor under UV radiation of an 8W Hg lamp. The photocatalytic activity of vermiculite–hydrobiotite–mica-like layers at different water hydration states in the interstratified structure and the substitution ratio of Fe(III)/Al in tetrahedra can initiate electrons and h+ holes on the surface that attack the methanol in redox processes. The activity of α-Fe2O3 nanoparticle photocatalysts stems from a larger crystallite size and surface area. The hydrogen production from the methanol–water mixture in the presence of vermiculites and α-Fe2O3 nanoparticles/vermiculite composites was very similar and higher than the yield produced by the commercial TiO2 photocatalyst Evonik P25 (H2 = 1052 µmol/gcat.). The highest yield of hydrogen was obtained in the presence of the Fe/V–700 composite (1303 µmol/gcat after 4 h of irradiation).

Improving the 6-Aminopenicillanic acid release process using vermiculite-alginate biocomposite bead on drug delivery system

The present study deals with developing vermiculite (VMT)-alginate (Alg) composites with different cross-linker concentrations (CaCl₂) to deliver the controlled 6-aminopenicillin acid (6-APA). The Characterization of synthesized composites was conducted by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses. Optimization attempts were explored via the response surface method (RSM) to best predict the actual amount of compound. The adsorption capacity of 6-APA onto this adsorbent was found to be 208.33 mg/g, which was higher than that for other clays. The equilibrium and Kinetic studies (chemical reaction and diffusion-based models) indicated that drug absorption on VMT-Alg is homogeneous with chemical interaction. An increase in cross-linker (CaCl₂) concentration leads to improvement in the drug encapsulation efficiency while having no significant effect on loading efficiency. The in-vitro release of the pure drug shows a rapid burst release followed by 100% cumulative release within 6 h. Whereas, the synthesized drug with Alg substantially showed less release of 43% after 8 h. Release experiments revealed that the presence of the CaCl₂ delayed the release of the 6-APA less than 35% after 12 h. The kinetic release of 6-APA is followed by the Korsmeyer-Peppas model based on Fick's law mechanism due to the kinetic exponent (n < 0.5). All studied composites antibacterial activity after 24 h exposure against E. Coli and S. aureus. The antibacterial activities of composites were evaluated by the halo of no growth. The results showed that the VMT-Alg-6APA composite had strong activity against Gram-positive and Gram-negative bacteria.

Submicron-Sized Vermiculite Assisted Oregano Oil for Controlled Release and Long-Term Bacterial Inhibition

Oregano essential oil (OEO) is a natural compound consisting of potent antibiotic molecules. Its volatility is the major obstacle against the transportation and anti-bacterial performance. In this work, submicron-sized vermiculite (SMV) particles were prepared from Australian vermiculite clay by ball milling, and tested as a potential particulate-carrier for OEO. The loading of OEO by SMV can be easily achieved by mechanical mixing. Compared to raw vermiculite and free OEO, the OEO-loaded SMV displayed sustained isothermal release behaviour of OEO and demonstrated enhanced antibacterial performance in in vitro antibacterial tests against Escherichia coli (E. coli) and Staphylococcus epidermidis (S. epidermidis). This study provides a facile and commercially viable approach in designing advantageous carriers for volatile actives in antimicrobial applications.

Tribo-Mechanical Properties of the Antimicrobial Low-Density Polyethylene (LDPE) Nanocomposite with Hybrid ZnO–Vermiculite–Chlorhexidine Nanofillers

Materials made from low-density polyethylene (LDPE) in the form of packages or catheters are currently commonly applied medical devices. Antimicrobial LDPE nanocomposite materials with two types of nanofillers, zinc oxide/vermiculite (ZnO/V) and zinc oxide/vermiculite_chlorhexidine (ZnO/V_CH), were prepared by a melt-compounded procedure to enrich their controllable antimicrobial, microstructural, topographical and tribo-mechanical properties. X-ray diffraction (XRD) analysis and Fourier transform infrared spectroscopy (FTIR) revealed that the ZnO/V and ZnO/V_CH nanofillers and LDPE interacted well with each other. The influence of the nanofiller concentrations on the LDPE nanocomposite surface changes was studied through scanning electron microscopy (SEM), and the surface topology and roughness were studied using atomic force microscopy (AFM). The effect of the ZnO/V nanofiller on the increase in indentation hardness (HIT) was evaluated by AFM measurements and the Vickers microhardness (HV), which showed that as the concentration of the ZnO/V nanofiller increased, these values decreased. The ZnO/V and ZnO/V_CH nanofillers, regardless of the concentration in the LDPE matrix, slightly increased the average values of the friction coefficient (COF). The abrasion depths of the wear indicated that the LDPE_ZnO/V nanocomposite plates exhibited better wear resistance than LDPE_ZnO/V_CH. Higher HV and HIT microhardness values were measured for both nanofillers than the natural LDPE nanocomposite plate. Very positive antimicrobial activity against S. aureus and P. aeruginosa after 72 h was found for both nanofiller types.

Effects of Ultrasound on Zinc Oxide/Vermiculite/Chlorhexidine Nanocomposite Preparation and Their Antibacterial Activity

Microbial infection and biofilm formation are both problems associated with medical implants and devices. In recent years, hybrid organic-inorganic nanocomposites based on clay minerals have attracted significant attention due to their application potential in the field of antimicrobial materials. Organic drug/metal oxide hybrids exhibit improved antimicrobial activity, and intercalating the above materials into the interlayer of clay endows a long-term and controlled-release behavior. Since antimicrobial activity is strongly related to the structure of the material, ultrasonic treatment appears to be a suitable method for the synthesis of these materials as it can well control particle size distribution and morphology. This study aims to prepare novel, structurally stable, and highly antimicrobial nanocomposites based on zinc oxide/vermiculite/chlorhexidine. The influence of ultrasonic treatment at different time intervals and under different intercalation conditions (ultrasonic action in a breaker or in a Roset's vessel) on the structure, morphology, and particle size of prepared hybrid nanocomposite materials was evaluated by the following methods: scanning electron microscopy, X-ray diffraction, energy dispersive X-ray fluorescence spectroscopy, carbon phase analysis, Fourier transforms infrared spectroscopy, specific surface area measurement, particle size analysis, and Zeta potential analysis. Particle size analyses confirmed that the ultrasonic method contributes to the reduction of particle size, and to their homogenization/arrangement. Further, X-ray diffraction analysis confirmed that ultrasound intercalation in a beaker helps to more efficiently intercalate chlorhexidine dihydrochloride (CH) into the vermiculite interlayer space, while a Roset's vessel contributed to the attachment of the CH molecules to the vermiculite surface. The antibacterial activity of hybrid nanocomposite materials was investigated on Gram negative (Escherichia coli, Pseudomonas aeruginosa) and Gram positive (Staphylococcus aureus, Enterococcus faecalis) bacterial strains by finding the minimum inhibitory concentration. All hybrid nanocomposite materials prepared by ultrasound methods showed high antimicrobial activity after 30 min, with a long-lasting effect and without being affected by the concentration of the antibacterial components zinc oxide (ZnO) and CH. The benefits of the samples prepared by ultrasonic methods are the rapid onset of an antimicrobial effect and its long-term duration.

Study on montmorillonite-chlorhexidine acetate-terbinafine hydrochloride intercalation composites as drug release systems

This paper focuses on the intercalation of chlorhexidine acetate (CA) and terbinafine hydrochloride (TBH) into montmorillonite as sustained release drug carriers. The intercalation compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). The basal spacing of montmorillonite increased from 1.23 to 2.97 nm. It was confirmed that CA and TBH molecules were well-stabilized in the interlayer space of clay via mono-, double or triplicate layer stacking. The adsorption amounts and molecular structures of CA and TBH appeared to depend on the cation exchange capacity of MMT, which in turn, tailored the drug release patterns. In vitro release tests of MMT-CA-TBH in 0.9 wt% NaCl solution at 37 °C show a biphasic and sustained profile of CA and TBH ion release. After release, dissolution-diffusion kinetic models were fitted. The mechanism of MMT-CA-TBH release is probably due to surface diffusion and bulk diffusion via ionic exchange of MMT ions on or in the MMT with ions in the NaCl solution. The in vitro release experiments revealed that CA and TBH were released from MMT steadily, depending on the cooperation between the drugs themselves and the electrostatic interactions between the drugs and MMT. It was found that the cross-linking ratio increased due to a decrease in the free volume available for diffusion.

Carmellose Mucoadhesive Oral Films Containing Vermiculite/Chlorhexidine Nanocomposites as Innovative Biomaterials for Treatment of Oral Infections

Infectious stomatitis represents the most common oral cavity ailments. Current therapy is insufficiently effective because of the short residence time of topical liquid or semisolid medical formulations. An innovative application form based on bioadhesive polymers featuring prolonged residence time on the oral mucosa may be a solution to this challenge. This formulation consists of a mucoadhesive oral film with incorporated nanocomposite biomaterial that is able to release the drug directly at the target area. This study describes the unique approach of preparing mucoadhesive oral films from carmellose with incorporating a nanotechnologically modified clay mineral intercalated with chlorhexidine. The multivariate data analysis was employed to evaluate the influence of the formulation and process variables on the properties of the medical preparation. This evaluation was complemented by testing the antimicrobial and antimycotic activity of prepared films with the aim of finding the most suitable composition for clinical application. Generally, the best results were obtained with sample containing 20 mg of chlorhexidine diacetate carried by vermiculite, with carmellose in the form of nonwoven textile in its structure. In addition to its promising physicomechanical, chemical, and mucoadhesive properties, the formulation inhibited the growth of Staphylococcus and Candida; the effect was prolonged for tens of hours.