Biomimetic modified clinical-grade POSS-PCU nanocomposite polymer for bypass graft applications: a preliminary assessment of endothelial cell adhesion and haemocompatibility

Novel hybrid composites based on double-decker silsesquioxanes functionalized by methacrylate derivatives and polyvinyl alcohol as potential materials utilized in biomedical applications

The use of diverse biomaterials for regenerative medicine is constantly evolving. Therefore, looking for easy-to-scale-up materials in terms of preparation, less complex composition, and featuring structural and chemical stability seems justified. In this work, we report the preparation of double-decker silsesquioxane-based (DDSQ-based) composites, which, according to our best knowledge, have never been used as biomaterials. A family of methacrylate-substituted DDSQs was obtained starting from the previously reported hydroxyalkyl double-decker silsesquioxanes. In the resulting hybrids, methacrylate groups are attached to each other's lateral silicon atoms of DDSQ in trans positions, providing an excellent geometry for forming thin layers. In contrast to pure organic methacrylates, the covalent bonding of methacrylate derivatives to inorganic silsesquioxane core improves mechanics, cell adhesion, and migration properties. Furthermore, to increase the hydrophilicity of the resulting DDSQ-based hybrids, polyvinyl alcohol (PVA) was added. The entire system forms an easy-to-obtain two-component (DDSQ-PVA) composite, which was subjected without any upgrading additives to biological tests later in the research. The resulting biomaterials fulfill the requirements for potential medical applications. Human fibroblasts growing on prepared hybrid composites are characterized by proper spindle-shaped morphology, proliferation, and activation status similar to control conditions (cells cultured on PVA), as well as increased adhesion and migration abilities. The obtained results suggest that the prepared biomaterials may be used in regenerative medicine in the future.

Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers

Magnesium (Mg)-based alloys are biodegradable metallic biomaterials that show promise in minimizing the risks of permanent metallic implants. However, their clinical applications are restricted due to their rapid in vivo degradation and low surface hemocompatibilities. Surface modifications are critically important for controlling the corrosion rates of Mg-based alloys and improving their hemocompatibilities. In the present study, two heparinization methods were developed to simultaneously increase the corrosion resistance and hemocompatibility of the AZ31 Mg alloy. In the first method, the surface of the AZ31 alloy was modified by alkali-heat treatment and then aminolyzed by 3-amino propyltriethoxy silane (APTES), a self-assembly molecule, and heparin was grafted onto the aminolyzed surface. In the second method, before heparinization, polyamidoamine dendrimers (PAMAM4-4) were grafted onto the aminolyzed surface with APTES to increase the number of surface functional groups, and heparinization was subsequently performed. The presence of a peak with a wavelength of about 1560 cm^-1 in the FTIR spectrum for the sample modified with APTES and dendrimers indicated aminolysis of the surface. The results indicated that the corrosion resistance of the Mg alloy was significantly improved as a result of the formation of a passive layer following the alkali-heat treatment. The results obtained from a potentiodynamic polarization (PDP) test showed that the corrosion current in the uncoated sample decreased from 25 µA to 3.7 µA in the alkali-heat-treated sample. The corrosion current density was reduced by 14 and 50 times in samples treated with the self-assembly molecules, APTES and dendrimers, respectively. After heparinization, the clotting time for pristine Mg was greatly improved. Clotting time increased from 480 s for the pristine Mg sample to 630 s for the APTES- and heparin-modified samples and to 715 s for the PAMAM- and heparin-modified samples. Cell culture data showed a slight improvement in the cell-supporting behavior of the modified samples.

Surface Modification of Decellularized Heart Valve by the POSS-PEG Hybrid Hydrogel to Prepare a Composite Scaffold Material with Anticalcification Potential

Tissue-engineered heart valves (TEHVs) are the most promising replacement for heart valve transplantation. Decellularized heart valve (DHV) is one of the most common scaffold materials for TEHVs. In actual clinical applications, the most widely used method for treating DHV is cross-linking it with glutaraldehyde, but this method could cause serious problems such as calcification. In this study, we introduced polyhedral oligomeric silsesquioxane (POSS) nanoparticles into a poly(ethylene glycol) (PEG) hydrogel to prepare a POSS-PEG hybrid hydrogel, and then coated them on the surface of DHV to prepare the composite scaffold. The chemical structures, microscopic morphologies, cell compatibilities, blood compatibilities, and anticalcification properties were further investigated. Experimental results showed that the composite scaffold had good blood compatibility and excellent cell compatibility and could promote cell adhesion and proliferation. In vivo and in vitro anticalcification experiments showed that the introduction of POSS nanoparticles could reduce the degree of calcification significantly and the composite scaffold had obvious anticalcification ability. The DHV surface-coated with the POSS-PEG hybrid hydrogel is an alternative scaffold material with anticalcification potential for an artificial heart valve, which provides an idea for the preparation of TEHVs.

High-Throughput Methods in the Discovery and Study of Biomaterials and Materiobiology

The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials.

Anticalcification Potential of POSS-PEG Hybrid Hydrogel as a Scaffold Material for the Development of Synthetic Heart Valve Leaflets

Calcification of bioprosthetics is a primary challenge in the field of artificial heart valves and a main reason for biological heart valve prostheses failure. Recent advances in nanomaterial science have promoted the development of polymers with advantageous properties that are likely suitable for artificial heart valves. In this work, we developed a nanocomposite polymeric biomaterial POSS-PEG (polyhedral oligomeric silsesquioxane-polyethylene glycol) hybrid hydrogel, which not only has improved mechanical and surface properties but also excellent biocompatibility. The results of atomic force microscopy and in vivo animal experiments indicated that the content of POSS in the PEG matrix plays an important role on the surface and contributes to its biological properties, compared to the decellularized porcine aortic valve scaffold. Additionally, this modification leads to enhanced protection of the hydrogel from thrombosis. Furthermore, the introduction of POSS nanoparticles also gives the hydrogel a better calcification resistance efficacy, which was confirmed through in vitro tests and animal experiments. These findings indicate that POSS-PEG hybrid hydrogel is a potential material for functional heart valve prosthetics, and the use of POSS nanocomposites in artificial valves may offer potential long-term performance and durability advantages.

Large Polyhedral Oligomeric Silsesquioxane Cages: The Isolation of Functionalized POSS with an Unprecedented Si18 O27 Core

The synthesis of organo-functionalized polyhedral oligomeric silsesquioxanes (POSS, (R-SiO_1.5 )_n , T_n ) is an area of significant activity. To date, T₁₄ is the largest such cage synthesized and isolated as a single isomer. Herein, we report an unprecedented, single-isomer styryl-functionalized T₁₈ POSS. Unambiguously identified among nine possible isomers by multinuclear solution NMR (¹ H, ¹³ C, and ²⁹ Si), MALDI-MS, FTIR, and computational studies, this is the largest single-isomer functionalized T_n compound isolated to date. A ring-strain model was developed to correlate the ²⁹ Si resonances with the number of 6-, 5-, and/or 4-Si-atom rings that each non-equivalent Si atom is part of. The model successfully predicts the speciation of non-equivalent Si atoms in other families of T_n compounds, demonstrating its general applicability for assigning ²⁹ Si resonances to Si atoms in cage silsesquioxanes and providing a useful tool for predicting Si-atom environments.

Post-synthesis modification of functionalised polyhedral oligomeric silsesquioxanes with encapsulated fluoride – enhancing reactivity of T8-F POSS for materials synthesis

The first successful approach for modifying poorly reactive POSS containing F⁻ (T₈-F) and incorporating intact T₈-F within a nanohybrid material is described.

Argon plasma modification promotes adipose derived stem cells osteogenic and chondrogenic differentiation on nanocomposite polyurethane scaffolds; implications for skeletal tissue engineering

Bone and cartilage craniofacial defects due to trauma or congenital deformities pose a difficult problem for reconstructive surgeons. Human adipose stem cells (ADSCs) can differentiate into bone and cartilage and together with suitable scaffolds could provide a promising system for skeletal tissue engineering. It has been suggested that nanomaterials can direct cell behavior depending on their surface nanotopographies. Thus, this study examined whether by altering a nanoscaffold surface using radiofrequency to excite gases, argon (Ar), nitrogen (N₂) and oxygen (O₂) with a single step technique, we could enhance the osteogenic and chondrogenic potential of ADSCs. At 24 h, Ar modification promoted the highest increase in ADSCs adhesion as indicated by upregulation of vinculin and focal adhesion kinase (FAK) expression compared to O₂ and N₂ scaffolds. Furthermore, ADSCs on Ar-modified nanocomposite polymer POSS-PCU scaffolds upregulated expression of bone markers, alkaline phosphatase, collagen I and osteocalcin after 3 weeks. Cartilage markers, aggrecan and collagen II, were also upregulated on Ar-modified scaffolds at the mRNA and protein level. Finally, all plasma treated scaffolds supported tissue ingrowth and angiogenesis after grafting onto the chick chorioallantoic membrane. Ar promoted greater expression of vascular endothelial growth factor and laminin in ovo compared to O₂ and N₂ scaffolds as shown by immunohistochemistry. This study provides an important understanding into which surface chemistries best support the osteogenic and chondrogenic differentiation of ADSCs that could be harnessed for regenerative skeletal applications. Argon surface modification is a simple tool that can promote ADSC skeletal differentiation that is easily amenable to translation into clinical practice.

•

Bone and cartilage craniofacial defects due to trauma or congenital deformities pose a challenging problem for reconstructive surgeons.

•

Nanomaterials can direct adipose derived stem cell (ADSC) differentiation depending on their surface nanotopographies.

•

This study demonstrates that Argon surface modification improve the chondrogenesis and osteogenesis of ADSCs.

•

Argon surface modification is a tool that can upregulate ADSC skeletal differentiation and is amenable to translation into clinical practice.

Synthesis and Near Infrared Luminescence Properties of a Series of Lanthanide Complexes with POSS Modified Ligands

A polyhedral oligomeric silsesquioxanes (POSS) modified 8-hydroxyquinoline derivative (denoted as Q-POSS) was synthesized and used as a ligand to coordinate with lanthanide ions to obtain a series of lanthanide complexes Ln(Q-POSS)₃ (Ln = Er³⁺, Yb³⁺, Nd³⁺). The as-prepared lanthanide complexes have been characterized by FT-IR, UV⁻Vis, and elemental analysis. All these complexes showed the characteristic near-infrared (NIR) luminescence originated from the corresponding lanthanide ions under excitation. Compared with the unmodified counterparts LnQ₃ (HQ = 8-hydroxyquinoline), the Ln(Q-POSS)₃ complexes showed obviously increased emission intensity, which was ascribed mainly to the steric-hindrance effects of the POSS moiety in the ligands. It is believed that the POSS group could suppress undesired excimer formation and intermolecular aggregation, thus decreasing the concentration quenching effect of the corresponding lanthanide complexes.

Polyurethane synthesis for vascular application

Abstract

Three polyurethane formulations were prepared on the basis of siloxane; two formulations contained 1% and 3% of a hydroxyl functionalized polyhedral oligomeric silsesquioxane [POSS (ROH)₂] nano-particles (as a co-chain extender) and one was without nano-particle. Structures of the polyurethanes were characterized by FTIR and SEM. The effect of POSS nano-particles on properties of the synthesized PUs was examined for vascular applications by tensile test, contact angle, SEM, AFM and endothelial cells viability evaluation. Properties of the polyurethane with 1% POSS were compared with those of PU without POSS and the results showed 66% increase in the elongation-at-break, 53% increase in tensile strength and 33% increase in modulus, 9.45% increase in contact angle, 76.7% reduction in surface roughness and 9.46% increase in cell viability. It was also shown that a polyurethane containing 1% of POSS nano-particles in its structure developed the highest hydrophobicity, which resulted in its lowest potential for thrombosis.

Graphical Abstract

Argon plasma improves the tissue integration and angiogenesis of subcutaneous implants by modifying surface chemistry and topography

BACKGROUND

Tissue integration and vessel formation are important criteria for the successful implantation of synthetic biomaterials for subcutaneous implantation.

OBJECTIVE

We report the optimization of plasma surface modification (PSM) using argon (Ar), oxygen (O2) and nitrogen (N2) gases of a polyurethane polymer to enhance tissue integration and angiogenesis.

METHODS

The scaffold's bulk and surface characteristics were compared before and after PSM with either Ar, O2 and N2. The viability and adhesion of human dermal fibroblasts (HDFs) on the modified scaffolds were compared. The formation of extracellular matrix by the HDFs on the modified scaffolds was evaluated. Scaffolds were subcutaneously implanted in a mouse model for 3 months to analyze tissue integration, angiogenesis and capsule formation.

RESULTS

Surface analysis demonstrated that interfacial modification (chemistry, topography and wettability) achieved by PSM is unique and varies according to the gas used. O2 plasma led to extensive changes in interfacial properties, whereas Ar treatment caused moderate changes. N2 plasma caused the least effect on surface chemistry of the polymer. PSM-treated scaffolds significantly (P<0.05) enhanced HDF activity and growth over 21 days. Among all three gases, Ar modification showed the highest protein adsorption. Ar-modified scaffolds also showed a significant upregulation of adhesion-related proteins (vinculin, focal adhesion kinase, talin and paxillin; P<0.05) and extracellular matrix marker genes (collagen type I, fibronectin, laminin and elastin) and deposition of associated proteins by the HDFs. Subcutaneous implantation after 3 months demonstrated the highest tissue integration and angiogenesis and the lowest capsule formation on Ar-modified scaffolds compared with O2- and N2-modified scaffolds.

CONCLUSION

PSM using Ar is a cost-effective and efficient method to improve the tissue integration and angiogenesis of subcutaneous implants.

A density gradient of VAPG peptides on a cell-resisting surface achieves selective adhesion and directional migration of smooth muscle cells over fibroblasts

Selective adhesion and migration of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. In this study, a uniform cell-resisting layer of poly(ethylene glycol) (PEG) with a density gradient of azide groups was generated on a substrate by immobilizing two kinds of PEG molecules in a gradient manner. A density gradient of alkynyl-functionalized Val-Ala-Pro-Gly (VAPG) peptides was then prepared on the PEG layer via click chemistry. The VAPG density gradient was characterized by fluorescence imaging, revealing the gradual enhancement of the fluorescent intensity along the substrate direction. The adhesion and mobility of SMCs were selectively enhanced on the VAPG density gradient, leading to directional migration toward the higher peptide density (up to 84%). In contrast, the adhesion and mobility of FIBs were significantly weakened. The net displacement of SMCs also significantly increased compared with that on tissue culture polystyrene (TCPS) and that of FIBs on the gradient. The mitogen-activated protein kinase (MAPK) signaling pathways related to cell migration were studied, showing higher expressions of functional proteins from SMCs on the VAPG-modified surface in a density-dependent manner. For the first time the selective adhesion and directional migration of SMCs over FIBs was achieved by an elaborative design of a gradient surface, leading to a new insight in design of novel vascular regenerative materials.

STATEMENT OF SIGNIFICANCE

Selective cell adhesion and migration guided by regenerative biomaterials are extremely important for the regeneration of targeted tissues, which can avoid the drawbacks of incorrect and uncontrolled responses of tissue cells to implants. For example, selectivity of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. Herein we prepare a uniform cell-repelling layer, on which SMCs-selective Val-Ala-Pro-Gly (VAPG) peptides are immobilized in a continuous manner. Selective adhesion and enhanced and directional migration of SMCs over FIBs are achieved by the interplay of cell-repelling layer and gradient SMCs-selective VAPG peptides, paving a new way for the design of novel vascular grafts with enhanced biological performance.

Surface modification and endothelialization of polyurethane for vascular tissue engineering applications: a review

Cardiovascular implants, especially vascular grafts made of synthetic polymers, find wide clinical applications in the treatment of cardiovascular diseases. However, cases of failure still exist, notably caused by restenosis and thrombus formation. Aiming to solve these problems, various approaches to surface modification of synthetic vascular grafts have been used to improve both the hemocompatibility and long-term patency of artificial vascular grafts. Surface modification using hydrophilic molecules can enhance hemocompatibility, but this may limit the initial vascular endothelial cell adhesion. Therefore, the improvement of endothelialization on these grafts with specific peptides and biomolecules is now an exciting field of research. In this review, several techniques to improve surface modification and endothelialization on vascular grafts, mainly polyurethane (PU) grafts, are summarized, together with the recent development and evolution of the different strategies: from the use of PEG, zwitterions, and polysaccharides to peptides and other biomolecules and genes; from in vitro endothelialization to in vivo endothelialization; and from bio-inert and bio-active to bio-mimetic approaches.

Sustained release of growth hormone and sodium nitrite from biomimetic collagen coating immobilized on silicone tubes improves endothelialization

Biocompatibility of biomedical devices can be improved by endothelialization of blood-contacting parts mimicking the vascular endothelium's function. Improved endothelialization might be obtained by using biomimetic coatings that allow local sustained release of biologically active molecules, e.g. anti-thrombotic and growth-inducing agents, from nanoliposomes. We aimed to test whether incorporation of growth-inducing nanoliposomal growth hormone (nGH) and anti-thrombotic nanoliposomal sodium nitrite (nNitrite) into collagen coating of silicone tubes enhances endothelialization by stimulating endothelial cell proliferation and inhibiting platelet adhesion. Collagen coating stably immobilized on acrylic acid-grafted silicone tubes decreased the water contact angle from 102° to 56°. Incorporation of 50 or 500nmol/ml nNitrite and 100 or 1000ng/ml nGH into collagen coating decreased the water contact angle further to 48°. After 120h incubation, 58% nitrite and 22% GH of the initial amount of sodium nitrite and GH in nanoliposomes were gradually released from the nNitrite-nGH-collagen coating. Endothelial cell number was increased after surface coating of silicone tubes with collagen by 1.6-fold, and with nNitrite-nGH-collagen conjugate by 1.8-3.9-fold after 2days. After 6days, endothelial cell confluency in the absence of surface coating was 22%, with collagen coating 74%, and with nNitrite-nGH-collagen conjugate coating 83-119%. In the absence of endothelial cells, platelet adhesion was stimulated after collagen coating by 1.3-fold, but inhibited after nNitrite-nGH-collagen conjugate coating by 1.6-3.7-fold. The release of anti-thrombotic prostaglandin I₂ from endothelial cells was stimulated after nNitrite-nGH-collagen conjugate coating by 1.7-2.2-fold compared with collagen coating. Our data shows improved endothelialization and blood compatibility using nNitrite-nGH-collagen conjugate coating on silicone tubes suggesting that these coatings are highly suitable for use in blood-contacting parts of biomedical devices.

Biomimetic Heparan Sulfate-Like Coated ePTFE Grafts Reduce In-graft Neointimal Hyperplasia in Ovine Carotids

BACKGROUND

Thrombogenicity and neointimal hyperplasia are major causes for synthetic vascular graft failure. Bioactive coatings like heparin have improved patency by reducing thrombogenicity, but neointimal hyperplasia still remains an unsolved problem. Surface coatings with heparan sulfate (HS), the major component of the glycocalyx of endothelial cells, have shown reduced platelet and cell adhesion in vitro. The aim of the study was to evaluate the in vivo surface properties of expanded ePTFE vascular grafts with a semisynthetic HS-like coating (SSHS).

METHODS

ePTFE vascular grafts (n = 16, diameter 3.5 mm) covalently coated with SSHS were compared with uncoated grafts (n = 16) of the same diameter in a carotid interposition model in 16 sheep. The grafts were harvested at 20 wk for histological and morphometric analysis.

RESULTS

SSHS-coated grafts showed less neointima formation than uncoated grafts (P < 0.001). There was no evidence for cell or protein adhesion to SSHS-coated grafts, whereas the surface of uncoated ePTFE grafts was covered with a confluent circular layer of neointima. No difference was found concerning reactions at the anastomotic site of the genuine carotid vessel, both groups displayed neointimal hyperplasia.

CONCLUSIONS

ePTFE grafts covalently coated with a semisynthetic SSHS-glycosaminoglycan successfully mimicked the endothelial glycocalyx. They displayed excellent antiadhesive properties preventing neointimal formation on the graft surface. The results indicate that a biomimetic SSHS coating may be a useful component of bioengineered grafts and an alternative to synthetic surfaces and endothelial seeding.

In-situ photocrosslinkable nanohybrid elastomer based on polybutadiene/polyhedral oligomeric silsesquioxane

Hydroxyl functionalized nano-sized POSS or ethyleneglycol as diol monomers was incorporated to hydroxyl-terminated polybutadiene (HTPBD) chain in the presence of fumaryl chloride as extender. Blue light photocrosslinking system based on camphorquinone (photoinitiator) and dimethylaminoethyl methacrylate (accelerator) was applied to cure these two synthesized fumarate based macromers. Self-crosslinkability of unsaturated macromers and also crosslinking in presence of a reactive diluent were investigated in absence and presence of 1,4-butanediol dimethacrylate, respectively. Finally, photocured samples were characterized by XRD, SEM, equilibrium swelling study, TGA, DMTA, AFM and cell culture. The results showed that incorporation of POSS nanoparticle into the polymer matrix with a perfect distribution and dispersion can enhance thermal stability, mechanical and biocompatibility properties which can prove a good potential of this in-situ photocrosslinkable nanohybrid in medical applications.

Prominent Vascularization Capacity of Mesenchymal Stem Cells in Collagen-Gold Nanocomposites

The ideal characteristics of surface modification on the vascular graft for clinical application would be with excellent hemocompatibility, endothelialization capacity, and antirestenosis ability. Here, Fourier transform infrared spectroscopy (FTIR), surface enhanced Raman spectroscopy (SERS), atomic force microscopy (AFM), contact angle (θ) measurement, and thermogravimetric analysis (TGA) were used to evaluate the chemical and mechanical properties of collagen-gold nanocomposites (collagen+Au) with 17.4, 43.5, and 174 ppm of Au and suggested that the collagen+Au with 43.5 ppm of Au had better biomechanical properties and thermal stability than pure collagen. Besides, stromal-derived factor-1α (SDF-1α) at 50 ng/mL promoted the migration of mesenchymal stem cells (MSCs) on collagen+Au material through the α5β3 integrin/endothelial oxide synthase (eNOS)/metalloproteinase (MMP) signaling pathway which can be abolished by the knockdown of vascular endothelial growth factor (VEGF). The potentiality of collagen+Au with MSCs for vascular regeneration was evaluated by our in vivo rat model system. Artery tissues isolated from an implanted collagen+Au-coated catheter with MSCs expressed substantial CD-31 and α-SMA, displayed higher antifibrotic ability, antithrombotic activity, as well as anti-inflammatory response than all other materials. Our results indicated that the implantation of collagen+Au-coated catheters with MSCs could be a promising strategy for vascular regeneration.

Nanotopography-Induced Structural Anisotropy and Sarcomere Development in Human Cardiomyocytes Derived from Induced Pluripotent Stem Cells

Understanding the phenotypic development of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) is a prerequisite to advancing regenerative cardiac therapy, disease modeling, and drug screening applications. Lack of consistent hiPSC-CM in vitro data can be largely attributed to the inability of conventional culture methods to mimic the structural, biochemical, and mechanical aspects of the myocardial niche accurately. Here, we present a nanogrid culture array comprised of nanogrooved topographies, with groove widths ranging from 350 to 2000 nm, to study the effect of different nanoscale structures on the structural development of hiPSC-CMs in vitro. Nanotopographies were designed to have a biomimetic interface, based on observations of the oriented myocardial extracellular matrix (ECM) fibers found in vivo. Nanotopographic substrates were integrated with a self-assembling chimeric peptide containing the Arg-Gly-Asp (RGD) cell adhesion motif. Using this platform, cell adhesion to peptide-coated substrates was found to be comparable to that of conventional fibronectin-coated surfaces. Cardiomyocyte organization and structural development were found to be dependent on the nanotopographical feature size in a biphasic manner, with improved development achieved on grooves in the 700-1000 nm range. These findings highlight the capability of surface-functionalized, bioinspired substrates to influence cardiomyocyte development, and the capacity for such platforms to serve as a versatile assay for investigating the role of topographical guidance cues on cell behavior. Such substrates could potentially create more physiologically relevant in vitro cardiac tissues for future drug screening and disease modeling studies.

Plasma Surface Modification of Polyhedral Oligomeric Silsequioxane-Poly(carbonate-urea) Urethane with Allylamine Enhances the Response and Osteogenic Differentiation of Adipose-Derived Stem Cells

This study present amino functionalization of biocompatible polymer polyhedral oligomeric silsequioxane-poly(carbonate-urea) urethane (POSS-PCU) using plasma polymerization process to induce osteogenic differentiation of adipose derived stem cells (ADSCs). Optimization of plasma polymerization process was carried out keeping cell culture application in mind. Thus, samples were rigorously tested for retention of amino groups under both dry and wet conditions. Physio-chemical characterization was carried out using ninhydrin test, X-ray photon spectroscopy, scanning electron microscopy, and static water contact analysis. Results from physio chemical characterization shows that functionalization of the amino group is not stable under wet conditions and optimization of plasma process is required for stable bonding of amino groups to the POSS-PCU polymer. Optimized samples were later tested in vitro in short and long-term culture to study differentiation of ADSCs on amino modified samples. Short-term cell culture shows that initial cell attachment was significantly (p < 0.001) improved on amine modified samples (NH2-POSS-PCU) compared to unmodified POSS-PCU. NH2-POSS-PCU samples also facilitates osteogenic differentiation of ADSCs as confirmed by immunological staining of cells for extracellular markers such as collagen Type I and osteopontin. Quantification of total collagen and ALP activity also shows significant (p < 0.001) increase on NH2-POSS-PCU samples compared to unmodified POSS-PCU. A pilot study also confirms that these optimized amino modified POSS-PCU samples can further be functionalized using bone inducing peptide such as KRSR using conventional wet chemistry. This further provides an opportunity for biofunctionalization of the polymer for various tissue specific applications.

Plasma functionalization of polycarbonaturethane to improve endothelialization—Effect of shear stress as a critical factor for biocompatibility control

Medical devices made of polycarbonaturethane (PCU) combine excellent mechanical properties and little biological degradation, but restricted hemocompatibility. Modifications of PCU might reduce platelet adhesion and promote stable endothelialization. PCU was modified using gas plasma treatment, binding of hydrogels, and coupling of cell-active molecules (modified heparin, anti-thrombin III (ATIII), argatroban, fibronectin, laminin-nonapeptide, peptides with integrin-binding arginine-glycine-aspartic acid (RGD) motif). Biocompatibility was verified with static and dynamic cell culture techniques. Blinded analysis focused on improvement in endothelial cell (EC) adhesion/proliferation, anti-thrombogenicity, reproducible manufacturing process, and shear stress tolerance of ECs. EC adhesion and antithrombogenicity were achieved with 9/35 modifications. Additionally, 6/9 stimulated EC proliferation and 3/6 modification processes were highly reproducible for endothelialization. The latter modifications comprised immobilization of ATIII (A), polyethyleneglycole-diamine-hydrogel (E) and polyethylenimine-hydrogel connected with modified heparin (IH). Under sheer stress, only the IH modification improved EC adhesion within the graft. However, ECs did not arrange in flow direction and cell anchorage was restricted. Despite large variation in surface modification chemistry and improved EC adhesion under static culture conditions, additional introduction of shear stress foiled promising preliminary data. Therefore, biocompatibility testing required not only static tests but also usage of physiological conditions such as shear stress in the case of vascular grafts.

Surface modification of a POSS-nanocomposite material to enhance cellular integration of a synthetic bioscaffold

Polyhedral oligomeric silsesquioxane poly(carbonate-urea) urethane (POSS-PCU) is a versatile nanocomposite biomaterial with growing applications as a bioscaffold for tissue engineering. Integration of synthetic implants with host tissue can be problematic but could be improved by topographical modifications. We describe optimization of POSS-PCU by dispersion of porogens (sodium bicarbonate (NaHCO₃), sodium chloride (NaCl) and sucrose) onto the material surface, with the principle aim of increasing surface porosity, thus providing additional opportunities for improved cellular and vascular ingrowth. We assess the effect of the porogens on the material's mechanical strength, surface chemistry, wettability and cytocompatibilty. Surface porosity was characterized by scanning electron microscopy (SEM). There was no alteration in surface chemistry and wettability and only modest changes in mechanical properties were detected. The size of porogens correlated well with the porosity of the construct produced and larger porogens improved interconnectivity of spaces within constructs. Using primary human bronchial epithelial cells (HBECs) we demonstrate moderate in vitro cytocompatibility for all surface modifications; however, larger pores resulted in cellular aggregation. These cells were able to differentiate on POSS-PCU scaffolds. Implantation of the scaffold in vivo demonstrated that larger pore sizes favor cellular integration and vascular ingrowth. These experiments demonstrate that surface modification with large porogens can improve POSS-PCU nanocomposite scaffold integration and suggest the need to strike a balance between the non-porous surfaces required for epithelial coverage and the porous structure required for integration and vascularization of synthetic scaffolds in future construct design.

Surface Modification of Biodegradable Polymers towards Better Biocompatibility and Lower Thrombogenicity

Purpose

Drug-eluting stents (DES) based on permanent polymeric coating matrices have been introduced to overcome the in stent restenosis associated with bare metal stents (BMS). A further step was the development of DES with biodegradable polymeric coatings to address the risk of thrombosis associated with first-generation DES. In this study we evaluate the biocompatibility of biodegradable polymer materials for their potential use as coating matrices for DES or as materials for fully bioabsorbable vascular stents.

Materials and Methods

Five different polymers, poly(L-lactide) PLLA, poly(D,L-lactide) PDLLA, poly(L-lactide-co-glycolide) P(LLA-co-GA), poly(D,L-lactide-co-glycolide) P(DLLA-co-GA) and poly(L-lactide-co-ε-caprolactone), P(LLA-co-CL) were examined in vitro without and with surface modification. The surface modification of polymers was performed by means of wet-chemical (NaOH and ethylenediamine (EDA)) and plasma-chemical (O₂ and NH₃) processes. The biocompatibility studies were performed on three different cell types: immortalized mouse fibroblasts (cell line L929), human coronary artery endothelial cells (HCAEC) and human umbilical vein endothelial cells (HUVEC). The biocompatibility was examined quantitatively using in vitro cytotoxicity assay. Cells were investigated immunocytochemically for expression of specific markers, and morphology was visualized using confocal laser scanning (CLSM) and scanning electron (SEM) microscopy. Additionally, polymer surfaces were examined for their thrombogenicity using an established hemocompatibility test.

Results

Both endothelial cell types exhibited poor viability and adhesion on all five unmodified polymer surfaces. The biocompatibility of the polymers could be influenced positively by surface modifications. In particular, a reproducible effect was observed for NH₃-plasma treatment, which enhanced the cell viability, adhesion and morphology on all five polymeric surfaces.

Conclusion

Surface modification of polymers can provide a useful approach to enhance their biocompatibility. For clinical application, attempts should be made to stabilize the plasma modification and use it for coupling of biomolecules to accelerate the re-endothelialization of stent surfaces in vivo.

Surface modification of silicone tubes by functional carboxyl and amine, but not peroxide groups followed by collagen immobilization improves endothelial cell stability and functionality

Surface modification by functional groups promotes endothelialization in biohybrid artificial lungs, but whether it affects endothelial cell stability under fluid shear stress, and the release of anti-thrombotic factors, e.g. nitric oxide (NO), is unknown. We aimed to test whether surface-modified silicone tubes containing different functional groups, but similar wettability, improve collagen immobilization, endothelialization, cell stability and cell-mediated NO-release. Peroxide, carboxyl, and amine-groups increased collagen immobilization (41-76%). Only amine-groups increased ultimate tensile strength (2-fold). Peroxide and amine enhanced (1.5-2.5 fold), but carboxyl-groups decreased (2.9-fold) endothelial cell number after 6 d. After collagen immobilization, cell numbers were enhanced by all group-modifications (2.8-3.8 fold). Cells were stable under 1 h-fluid shear stress on amine, but not carboxyl or peroxide-group-modified silicone (>50% cell detachment), while cells were also stable on carboxyl-group-modified silicone with immobilized collagen. NO-release was increased by peroxide and amine (1.1-1.7 fold), but decreased by carboxyl-group-modification (9.8-fold), while it increased by all group-modifications after collagen immobilization (1.8-2.8 fold). Only the amine-group-modification changed silicone stiffness and transparency. In conclusion, silicone-surface modification of blood-contacting parts of artificial lungs with carboxyl and amine, but not peroxide-groups followed by collagen immobilization allows the formation of a stable functional endothelial cell layer. Amine-group-modification seems undesirable since it affected silicone's physical properties.