Preparation, characterization and electrochemical application of Ag–ZnO nanoplates for voltammetric determination of glutathione and tryptophan using modified carbon paste electrode

Copper(II) phthalocyanine as an electrocatalytic electrode for cathodic detection of urinary tryptophan

Herein, we introduce a novel method for tryptophan detection via a reduction reaction facilitated by its interaction with a copper(II) phthalocyanine (CuPc) electrocatalytic electrode. This method addresses challenges associated with the susceptibility of the oxidation response to interference from various species when measuring tryptophan in bodily fluids. The reduction currents exhibit a linear increase with tryptophan concentrations in two ranges: 0.0013-0.10 mM and 0.10-1.20 mM, with the sensitivities of 14.7 ± 0.5 μA mM-1 and 3.5 ± 0.1 μA mM-1, respectively. The limit of detection (LOD, 3SB/m) is determined to be 0.39 μM. The sensor exhibits excellent reproducibility, with the relative standard deviation of <5%. Application of the sensor to authentic urine samples yields a % recovery of 101 ± 4%.

Application of surface nitrogen-doped graphene quantum dots in the sensing of ferric ions and glutathione: Spectroscopic investigations and DFT calculations

Developing a sensing platform that can quickly and accurately measure glutathione (GSH) is crucial for the early detection of various human diseases. GQDs have shown great potential in many technological and biological applications. This study focused on synthesizing nitrogen-doped GQDs (NGQDs) with stable blue fluorescence using a simple and easy hydrothermal method in one step. The bamboo fiber was used as the green source for this synthesis. The NGQDs had a tiny particle size of 4.7 nm and emitted light at 405 nm when excited. They displayed a remarkable quantum yield of 40.36 % and were effectively used as fluorescent probe to specifically detect Fe3+. The energy transfer mechanism led to the NGQDs' fluorescence being deactivated by Fe3+ ions (turn- "off"). However, with the addition of GSH to the system, the fluorescence intensity of NGQDs was reactivated (turn- "on"). Thus, a fluorescence turn "off-on" system was developed for the sensitive detection of Fe3+ and GSH. Using density functional theory (DFT), it was theoretically calculated that the surface of the fabricated NGQDs possess lone pairs of electrons on oxygens and doped nitrogen causing a photo-induced electron transfer (PET) process to occur. This PET process was suppressed previously owing to complex formation between oxygen atoms of modeled structure and ferric ions. The sensing platform displayed a sensitive response to Fe3+ in the 1-1000 μM range with LOD of 34 nM and GSH in the range of 1-50 μM, with a detection limit of 45 nM. Furthermore, the NGQDs exhibited high selectivity towards Fe3+ and GSH over other electrolytes and biomolecules. Additionally, the probe exhibited non-cytotoxicity and was practically applicable for the detection of GSH in HeLa cells.

Rapid and sensitive electrochemical detection of oxidized form of glutathione in whole blood samples using Bi-metallic nanocomposites

We report a facile one-pot synthesis of bimetallic nickel-gold (Ni-Au) nanocomposite for ultra-sensitive and selective electrochemical detection of oxidized glutathione (GSSG) by electrochemical deposition on fluorine doped tin oxide (FTO) substrate. The electrodeposition of Ni-Au nanocomposite on FTO was confirmed by various characterization techniques such as field emission scanning electron microscopy (FE-SEM), X-ray diffractometer (XRD) and Fourier transform infra-red (FTIR) spectroscopy. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) was utilized for the electrochemical characterization of glutathione reductase (GR)/Ni-Au/FTO working electrode at each stage of modification. The GR enzyme immobilized on the Ni-Au/FTO working electrode via glutaraldehyde cross-linking exhibited excellent selectivity against GSSG in the presence of nicotinamide adenine dinucleotide phosphate (NADPH). The immobilized GR enzyme breaks down the GSSG to reduced glutathione (GSH) and converting NADPH to NADP+ whereby generating an electron for the electrochemical sensing of GSSG. The synergistic behavior of bimetals and good electro-catalytic property of the fabricated sensor provided a broad linear detection range from 1 fM to 1 μM with a limit of detection (LOD) of 6.8 fM, limit of quantification (LOQ) of 20.41 fM and sensitivity of 0.024 mA/μM/cm2. The interference with other molecules such as dopamine, glycine, ascorbic acid, uric acid and glucose was found to be negligible due to the better selectivity of GR enzyme towards GSSG. The shelf-life and response time of the fabricated electrode was found to be 30 days and 32 s, respectively. The real sample analysis of GSSG in whole blood samples showed average recovery percentage from 95 to 101% which matched well with the standard calibration plot of the fabricated sensor with relative standard deviation (RSD) below 10%.

A New Electrochemical Method to Determine Tryptophan in Fruit Juices: Development and Validation

Tryptophan (Trp) is an essential amino acid usually found in fruit juices. Its determination is necessary for food companies because of its relation to human health. In this work, a new electrochemical method based on sonogel–carbon electrodes (SNGCEs) was developed and validated using an ultra performance liquid chromatography (UPLC) method as a reference method for the determination of Trp in fruit juices. Cyclic voltammetry (CV), chronoamperometry, and differential pulse voltammetry (DPV) techniques were applied to investigate the oxidation of Trp on a previously polarized SNGCE surface in a Britton–Robinson (BR) buffer solution at pH 3.6. The operating conditions for electroanalysis were optimized using a Box–Behnken design (BBD), obtaining an oxidation peak for Trp at 0.749 V. The linear range for this method was from 0.1 to 5 mg/L. The intraday and interday precision, expressed as a relative standard deviation (RSD), were 3.1% and 2.7%, respectively. The average recovery was 99.01%, and the limit of detection and quantitation were 0.33 and 1.09 mg/L, respectively. Therefore, from the quality analytical parameters obtained, it can be concluded that the new electrochemical method can be successfully used for the routine analysis of Trp in fruit juices. As far as we are concerned, this is the first time that a methodology for Trp determination was performed in this kind of real food matrices.

Unravelling the potential of disposable and modifiable pencils as catalyst supports for hydrogen evolution reaction

Pencil substrates are promising ideal durable carbon support also amenable for post characterization for evaluation of hydrogen evolution reaction catalysts.

A photoelectrochemical sensor for glutathione based on Bi2S3-modified TiO2 nanotube arrays

A novel photoelectrochemical sensor for the determination of glutathione based on Bi2S3-modified TiO2 nanotube arrays. Under the excitation of visible light, glutathione can be oxidized by the holes created by the Bi2S3/TiO2 NTAs.

Recent Advances in Electrochemical and Optical Sensors for Detecting Tryptophan and Melatonin

Tryptophan and melatonin are pleiotropic molecules, each capable of influencing several cellular, biochemical, and physiological responses. Therefore, sensitive detection of tryptophan and melatonin in pharmaceutical and human samples is crucial for human well-being. Mass spectrometry, high-performance liquid chromatography, and capillary electrophoresis are common methods for both tryptophan and melatonin analysis; however, these methods require copious amounts of time, money, and manpower. Novel electrochemical and optical detection tools have been subjects of intensive research due to their ability to offer a better signal-to-noise ratio, high specificity, ultra-sensitivity, and wide dynamic range. Recently, researchers have designed sensitive and selective electrochemical and optical platforms by using new surface modifications, microfabrication techniques, and the decoration of diverse nanomaterials with unique properties for the detection of tryptophan and melatonin. However, there is a scarcity of review articles addressing the recent developments in the electrochemical and optical detection of tryptophan and melatonin. Here, we provide a critical and objective review of high-sensitivity tryptophan and melatonin sensors that have been developed over the past six years (2015 onwards). We review the principles, performance, and limitations of these sensors. We also address critical aspects of sensitivity and selectivity, limit and range of detection, fabrication process and time, durability, and biocompatibility. Finally, we discuss challenges related to tryptophan and melatonin detection and present future outlooks.

Recent advances in ZnO nanostructure-based electrochemical sensors and biosensors

Nanostructured metal oxides, such as zinc oxide (ZnO), are considered as excellent materials for the fabrication of highly sensitive and selective electrochemical sensors and biosensors due to their good properties, including a high specific surface area, high catalytic efficiency, strong adsorption ability, high isoelectric point (IEP, 9.5), wide band gap (3.2 eV), biocompatibility and high electron communication features. Thus, ZnO nanostructures are widely used to fabricate efficient electrochemical sensors and biosensors for the detection of various analytes. In this review, we have discussed the synthesis of ZnO nanostructures and the advances in various ZnO nanostructure-based electrochemical sensors and biosensors for medical diagnosis, pharmaceutical analysis, food safety, and environmental pollution monitoring.

Recent Advances in Applications of Voltammetric Sensors Modified with Ferrocene and Its Derivatives

This study is on current developments concerning ferrocene (FC) and its derivatives on the basis of electrochemical biosensors and sensors. The distinct physiochemical characteristics of FC have enabled the development of new sensor devices, specifically electrochemical sensors. Several articles have focused on the implementation of FC as an electrode constituent while discussing its electrochemical behavior. Furthermore, typical FC-design-based biosensors and sensors are considered as well as practical examples. The favorable design of FC-based biosensors and general sensors needs adequate control of their chemical and physical characteristics in addition to their surface immobilization and functionalization.

Developments and applications of nanomaterial-based carbon paste electrodes

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes. Following an introduction into the field, a first large section covers sensors for biological species and pharmaceutical compounds (with subsections on sensors for antioxidants, catecholamines and amino acids). The next section covers sensors for environmental pollutants (with subsections on sensors for pesticides and heavy metal ions). Several tables are presented that give an overview on the wealth of methods (differential pulse voltammetry, square wave voltammetry, amperometry, etc.) and different nanomaterials available. A concluding section summarizes the status, addresses future challenges, and gives an outlook on potential trends.

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes.

Overview and recent advances in electrochemical sensing of glutathione - A review

The present paper is aimed at providing an overview of the recent advances in the electrochemical sensing of glutathione (GSH), an important electrochemically and biologically active molecule, for the period 2012-2018. Herein, the analytical performances of newly developed electrochemical methods, procedures and protocols for GSH sensing are comprehensively and critically discussed with respect to the type of method, electrodes used (new electrode modifications, advanced materials and formats), sample matrices, and basic validation parameters obtained (limit of detection, linear dynamic range, precision, selectivity/evaluation of interferences). This paper considers electrochemical methods used alone as well as the hyphenated methods with electrochemical detection (ECD), such as HPLC-ECD or CE-ECD. The practical applicability of the platforms developed for GSH detection and quantification is mostly focused on pharmaceutical and biomedical analysis. The most significant electrochemical approaches for GSH detection in multicomponent analyte samples and multicomponent matrices and for real-time in vivo GSH analysis are highlighted. The great variability in the electrochemical techniques, electrode approaches, and obtainable performance parameters, discussed in this review, brought new insights not only on current GSH and glutathione disulfide (GSSG) determinations, but, along with this, on the advances in electrochemical analysis from a more general point of view.

Selective Determination of Levodopa in the Presence of Vitamin B6, Theophylline and Guaifenesin Using a Glassy Carbon Electrode Modified with a Composite of Hematoxylin and Graphene/ZnO

An electrode has been developed based on using a composite of hematoxylin/graphene/ZnO nanocomposite to modify a glassy carbon electrode (GCE). The electrode (HGGCE) was tested and found to be applicable for the voltammetric analysis of levodopa in the presence of vitamin B₆, theophylline and guaifenesin using a 0.1 M phosphate buffer solution (PBS) pH 7 as the solvent. The HGGCE was used as the working electrode in cyclic voltammetry (CV) and square wave voltammetry (SWV) studies on the electrochemical behavior of levodopa at its surface. The results showed a dramatic enhancement in the oxidation current of levodopa and a shift in its oxidation potential towards more negative potentials as opposed to identical tests using bare GCE as the working electrode. The studies showed that the increase in the oxidation current has two linear profiles in two concentration ranges of 0.05 - 90.0 and 90.0 - 1000.0 μM. The detection limit of SWV analysis using the modified electrode was determined to be 0.03 μM (S/N = 3). Further advantages of the methods based on HGGCE include the simple modification procedure of the electrode, as well as its excellent sensitivity and reproducibility. The modified electrode was eventually found to be applicable to the determination of mixtures of levodopa, vitamin B₆, theophylline and guaifenesin in real samples.

Electrochemical aptasensor for multi-antibiotics detection based on endonuclease and exonuclease assisted dual recycling amplification strategy

An ultrasensitive electrochemical aptasensor for multiplex antibiotics detection based on endonuclease and exonuclease assisted dual recycling amplification strategy was proposed. Kanamycin and chloramphenicol were selected as candidates. Firstly, aptamers of the antibiotics were immobilized on bar A and then binding with their endonuclease labeled complementary DNA strands to construct enzyme-cleavage probes. Secondly, The nano zirconium-metal organic framework (NMOF) particles with 1,4-benzene-dicarboxylate (BDC) as linker was defined as UiO-66. And its updated version, hierarchically porous UiO-66 (HP-UIO-66) decorated with different electroactive materials as signal tags were synthesized. Then they were immobilized on bar B linked by two duplex DNA strands which can be specifically cleaved by corresponding enzyme-cleavage probes in bar A. Once targets were introduced into system, aptamers can capture them and then release enzyme-cleavage probes. In the presence of exonuclease-I, exonuclease assisted target recycling amplification was triggered and more enzyme-cleavage probes were released into solution. The probes can trigger endonuclease assisted recycles and repeatedly cleave their corresponding duplex DNA strands on bar B then released numerous signal tags into supernatant. Thus two recycling amplification was performed in the system. Finally, MB and Fc in the signal tags were detected by square wave voltammetry after removing bar A/B and the current intensities were correspondent with the concentration of KANA and CAP respectively. Under the optimum condition, the limits of detection for the KANA and CAP were 35fM and 21fM respectively with a wide linear range from 1 × 10^-4 to 50nM. This dual recycling amplification detection system exhibited high sensitivities and specificity. It can be easily extended to detect other targets if changing the corresponding aptamers and has potential application values for screening of multiplex antibiotics residues in food safety.

A new 2-amino-3-pynanopyrane-3- carbonitrile derivative for electrocatalytic oxidation and determination of hydrazine

A noble glassy carbon electrode modified with Au nanoparticles and 2-amino-4-(3,4-dihydroxyphenyl)-6-(hydroxymethyl)-8-oxo-4,8-dihydropyrano[3,2-b]pyran-3-carbonitrile, was fabricated for electrocatalytic determination of hydrazine (AuNPs/APP/GCE). Large over-potential and interference of some species are two limitation factors for the determination of hydrazine at bare electrode. This modified electrode is able to shift a signal to the negative potential, and can amplify the oxidation current of hydrazine by 28.0 time, compared to bare electrode. The diffusion coefficient, D, and the heterogeneous rate constant, k_h, for the oxidation of hydrazine at the modified surface were calculated by chronoamperometric studies. Finally, the fabricated sensor was agreeably utilized for the determination of hydrazine in real samples.

Facile preparation of poly(methylene blue) modified carbon paste electrode for the detection and quantification of catechin

Free radicals are formed as byproducts of metabolism, and are highly unstable due to the presence of unpaired electrons. They readily react with other important cellular components such as DNA causing them damage. Antioxidants such as (+)-catechin (CAT), neutralize free radicals in the blood stream. Hence there is a need for detection and quantification of catechin concentration in various food sources and beverages. Electro-oxidative properties of catechin were investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). A carbon paste working electrode modified by electropolymerizing methylene blue (MB) was fabricated. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) techniques were used to study the surface morphology of the electrode. Quasi-reversible electron transfer reaction occurred at +0.260V through a diffusion controlled process. In comparison to the bare carbon paste electrode (CPE), there was a significant 5.3 times increment in anodic current sensitivity at the modified electrode at physiological pH. Our findings indicate that for the electro-oxidation of CAT, CPE is a better base material for electropolymerization of MB compared to glassy carbon electrode (GCE). Nyquist plot followed the theoretical shape, indicating low interfacial charge transfer resistance of 0.095kΩ at the modified electrode. Calibration plots obtained by DPV were linear in two ranges of 1.0×10^-3 to 1.0×10^-6 and 1.0×10^-7 to 0.1×10^-8M. The limit of detection (LOD) and limit of quantification (LOQ) was 4.9nM and 14nM respectively. Application of the developed electrode was demonstrated by detecting catechin in green tea and spiked fruit juice with satisfactory recoveries. The sensor was stable, sensitive, selective and reproducible.