Immobilization of serum albumin and peptide aptamer for EPC on polydopamine coated titanium surface for enhanced in-situ self-endothelialization

Poly(ethylene glycol) Hydrogels with the Sustained Release of Hepatocyte Growth Factor for Enhancing Vascular Regeneration

The surface modification of biologically active factors on tissue-engineering vascular scaffold fails to fulfill the mechanical property and bioactive compounds' sustained release in vivo and results in the inhibition of tissue regeneration of small-diameter vascular grafts in vascular replacement therapies. In this study, biodegradable poly(ε-caprolactone) (PCL) was applied for scaffold preparation, and poly(ethylene glycol) (PG) hydrogel was used to load heparin and hepatocyte growth factor (HGF). In vitro analysis demonstrated that the PCL scaffold could inhibit the heparin release from the PG hydrogel, and the PG hydrogel could inhibit heparin release during the process of PCL degradation. Finally, it results in sustained release of HGF and heparin from the PCL-PG-HGF scaffold. The mechanical property of this hybrid scaffold improved after being coated with the PG hydrogel. In addition, the PCL-PG-HGF scaffold illustrated no inflammatory lesions, organ damage, or biological toxicity in all primary organs, with rapid organization of the endothelial cell layer, smooth muscle regeneration, and extracellular matrix formation. These results indicated that the PCL-PG-HGF scaffold is biocompatible and provides a microenvironment in which a tissue-engineered vascular graft with anticoagulant properties allows regeneration of vascular tissue (Scheme 1). Such findings confirm the feasibility of creating hydrogel scaffolds coated with bioactive factors to prepare novel vascular grafts.

Re-endothelialization of Decellularized Scaffolds With Endothelial Progenitor Cell Capturing Aptamer: A New Strategy for Tissue-Engineered Heart Valve

Tissue-engineered heart valve (TEHV) is a promising alternative to current heart valve substitute. Decellularized porcine aortic heart valves (DAVs) are the most common scaffolds of TEHV. Hard to endothelialization is one of the disadvantages of DAVs. Therefore, we aimed to immobilize endothelial progenitor cell (EPC)-aptamer onto DAVs for accelerating endothelialization. In this study, three groups of scaffolds were constructed: DAVs, aptamer-immobilized DAVs (aptamer-DAVs), and glutaraldehyde crosslinked DAVs (GA-DAVs). The results of flow cytometry revealed that EPC-aptamer was specific to EPCs and was immobilized onto DAVs. Cells adhesion experiments demonstrated that EPCs adhered more tightly onto aptamer-DAVs group than other two groups of scaffolds. And cell proliferation assay indicated that EPCs seeded onto aptamer-DAVs group grew faster than DAVs group and GA-DAVs group. Moreover, dynamic capture experiment in flow conditions revealed that the number of EPCs captured by aptamer-DAVs group was more than other two groups. In conclusion, aptamer-DAVs could specifically promote adhesion and proliferation of EPCs and had ability to capture EPCs in simulated flow condition. This could promote re-endothelialization of scaffolds.

Functionalization of in vivo tissue-engineered living biotubes enhance patency and endothelization without the requirement of systemic anticoagulant administration

Vascular regeneration and patency maintenance, without anticoagulant administration, represent key developmental trends to enhance small-diameter vascular grafts (SDVG) performance. In vivo engineered autologous biotubes have emerged as SDVG candidates with pro-regenerative properties. However, mechanical failure coupled with thrombus formation hinder translational prospects of biotubes as SDVGs. Previously fabricated poly(ε-caprolactone) skeleton-reinforced biotubes (PBs) circumvented mechanical issues and achieved vascular regeneration, but orally administered anticoagulants were required. Here, highly efficient and biocompatible functional modifications were introduced to living cells on PB lumens. The 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-N-methoxy (DMPE)-PEG-conjugated anti-coagulant bivalirudin (DPB) and DMPE-PEG-conjugated endothelial progenitor cell (EPC)-binding TPS-peptide (DPT) modifications possessed functionality conducive to promoting vascular graft patency. Co-modification of DPB and DPT swiftly attained luminal saturation without influencing cell viability. DPB repellent of non-specific proteins, DPB inhibition of thrombus formation, and DPB protection against functional masking of DPT's EPC-capture by blood components, which promoted patency and rapid endothelialization in rat and canine artery implantation models without anticoagulant administration. This strategy offers a safe, facile, and fast technical approach to convey additional functionalization to living cells within tissue-engineered constructs.

Aptamer-Based Electrochemical Microfluidic Biosensor for the Detection of Cryptosporidium parvum

Cryptosporidium parvum is a high-risk and opportunistic waterborne parasitic pathogen with highly infectious oocysts that can survive harsh environmental conditions for long periods. Current state-of-the-art methods are limited to lengthy imaging and antibody-based detection techniques that are slow, labor-intensive, and demand trained personnel. Therefore, the development of new sensing platforms for rapid and accurate identification at the point-of-care (POC) is essential to improve public health. Herein, we propose a novel electrochemical microfluidic aptasensor based on hierarchical 3D gold nano-/microislands (NMIs), functionalized with aptamers specific to C. parvum. We used aptamers as robust synthetic biorecognition elements with a remarkable ability to bind and discriminate among molecules to develop a highly selective biosensor. Also, the 3D gold NMIs feature a large active surface area that provides high sensitivity and a low limit of detection (LOD), especially when they are combined with aptamers,. The performance of the NMI aptasensor was assessed by testing the biosensor's ability to detect different concentrations of C. parvum oocysts spiked in different sample matrices, i.e., buffer, tap water, and stool, within 40 min detection time. The electrochemical measurements showed an acceptable LOD of 5 oocysts mL-1 in buffer medium, as well as 10 oocysts mL-1 in stool and tap water media, over a wide linear range of 10-100,000 oocysts mL-1. Moreover, the NMI aptasensor recognized C. parvum oocysts with high selectivity while exhibiting no significant cross-reactivity to other related coccidian parasites. The specific feasibility of the aptasensor was further demonstrated by the detection of the target C. parvum in patient stool samples. Our assay showed coherent results with microscopy and real-time quantitative polymerase chain reaction, achieving high sensitivity and specificity with a significant signal difference (p < 0.001). Therefore, the proposed microfluidic electrochemical biosensor platform could be a stepping stone for the development of rapid and accurate detection of parasites at the POC.

Biofunctionalization of HMX with Peptides via Polydopamine Crosslinking for Assembling an HMX@Al@CuO Nanoenergetic Composite

Biological approaches for the synthesis of a hybrid explosive-nanothermite energetic composite have attracted greater scientific attention because of their advantages, including their moderate reactions and the absence of secondary pollution. In this study, a simple technique was developed to fabricate a hybrid explosive-nanothermite energetic composite based on a peptide and a mussel-inspired surface modification. Polydopamine (PDA) was easily imprinted onto the HMX, where it maintained its reactivity and was capable of reacting with a specific peptide used to introduce Al and CuO NPs to the surface of the HMX via specific recognition. The hybrid explosive-nanothermite energetic composites were characterized using differential scanning calorimetry (TG-DSC), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy(XPS), and a fluorescence microscope. A thermal analysis was utilized to investigate the energy-release properties of the materials. The HMX@Al@CuO, which benefitted from an enhanced interfacial contact in comparison with the physically mixed sample (HMX-Al-CuO), demonstrated a 41% lower HMX activation energy.

Bio-inspired hemocompatible surface modifications for biomedical applications

When blood first encounters the artificial surface of a medical device, a complex series of biochemical reactions is triggered, potentially resulting in clinical complications such as embolism/occlusion, inflammation, or device failure. Preventing thrombus formation on the surface of blood-contacting devices is crucial for maintaining device functionality and patient safety. As the number of patients reliant on blood-contacting devices continues to grow, minimizing the risk associated with these devices is vital towards lowering healthcare-associated morbidity and mortality. The current standard clinical practice primarily requires the systemic administration of anticoagulants such as heparin, which can result in serious complications such as post-operative bleeding and heparin-induced thrombocytopenia (HIT). Due to these complications, the administration of antithrombotic agents remains one of the leading causes of clinical drug-related deaths. To reduce the side effects spurred by systemic anticoagulation, researchers have been inspired by the hemocompatibility exhibited by natural phenomena, and thus have begun developing medical-grade surfaces which aim to exhibit total hemocompatibility via biomimicry. This review paper aims to address different bio-inspired surface modifications that increase hemocompatibility, discuss the limitations of each method, and explore the future direction for hemocompatible surface research.

Construction of Mussel-Inspired Dopamine-Zn2+ Coating on Titanium Oxide Nanotubes to Improve Hemocompatibility, Cytocompatibility, and Antibacterial Activity

Zinc ions (Zn2+) are a highly potent bioactive factor with a broad spectrum of physiological functions. In situ continuous and controllable release of Zn2+ from the biomaterials can effectively improve the biocompatibility and antibacterial activity. In the present study, inspired by the adhesion and protein cross-linking in the mussel byssus, with the aim of improving the biocompatibility of titanium, a cost-effective one-step metal-catecholamine assembly strategy was developed to prepare a biomimetic dopamine-Zn2+ (DA-Zn2+) coating by immersing the titanium oxide nanotube (TNT) arrays on the titanium surface prepared by anodic oxidation into an aqueous solution containing dopamine (DA) and zinc ions (Zn2+). The DA-Zn2+ coatings with the different zinc contents exhibited excellent hydrophilicity. Due to the continuous release of zinc ions from the DA-Zn2+ coating, the coated titanium oxide nanotubes displayed excellent hemocompatibility characterized by platelet adhesion and activation and hemolysis assay. Moreover, the DA-Zn2+-coated samples exhibited an excellent ability to enhance endothelial cell (EC) adhesion and proliferation. In addition, the DA-Zn2+ coating can also enhance the antibacterial activity of the nanotubes. Therefore, long-term in situ Zn2+-releasing coating of the present study could serve as the bio-surfaces for long-term prevention of thrombosis, improvement of cytocompatibility to endothelial cells, and antibacterial activity. Due to the easy operation and strong binding ability of the polydopamine on various complicated shapes, the method of the present study can be further applied to other blood contact biomaterials or implantable medical devices to improve the biocompatibility.

Designing Cardiovascular Implants Taking in View the Endothelial Basement Membrane

Insufficient endothelialization of cardiovascular grafts is a major hurdle in vascular surgery and regenerative medicine, bearing a risk for early graft thrombosis. Neither of the numerous strategies pursued to solve these problems were conclusive. Endothelialization is regulated by the endothelial basement membrane (EBM), a highly specialized part of the vascular extracellular matrix. Thus, a detailed understanding of the structure–function interrelations of the EBM components is fundamental for designing biomimetic materials aiming to mimic EBM functions. In this review, a detailed description of the structure and functions of the EBM are provided, including the luminal and abluminal interactions with adjacent cell types, such as vascular smooth muscle cells. Moreover, in vivo as well as in vitro strategies to build or renew EBM are summarized and critically discussed. The spectrum of methods includes vessel decellularization and implant biofunctionalization strategies as well as tissue engineering-based approaches and bioprinting. Finally, the limitations of these methods are highlighted, and future directions are suggested to help improve future design strategies for EBM-inspired materials in the cardiovascular field.

Comparative Evaluation on Impacts of Fibronectin, Heparin-Chitosan, and Albumin Coating of Bacterial Nanocellulose Small-Diameter Vascular Grafts on Endothelialization In Vitro

In this study, we contrast the impacts of surface coating bacterial nanocellulose small-diameter vascular grafts (BNC-SDVGs) with human albumin, fibronectin, or heparin–chitosan upon endothelialization with human saphenous vein endothelial cells (VEC) or endothelial progenitor cells (EPC) in vitro. In one scenario, coated grafts were cut into 2D circular patches for static colonization of a defined inner surface area; in another scenario, they were mounted on a customized bioreactor and subsequently perfused for cell seeding. We evaluated the colonization by emerging metabolic activity and the preservation of endothelial functionality by water soluble tetrazolium salts (WST-1), acetylated low-density lipoprotein (AcLDL) uptake assays, and immune fluorescence staining. Uncoated BNC scaffolds served as controls. The fibronectin coating significantly promoted adhesion and growth of VECs and EPCs, while albumin only promoted adhesion of VECs, but here, the cells were functionally impaired as indicated by missing AcLDL uptake. The heparin–chitosan coating led to significantly improved adhesion of EPCs, but not VECs. In summary, both fibronectin and heparin–chitosan coatings could beneficially impact the endothelialization of BNC-SDVGs and might therefore represent promising approaches to help improve the longevity and reduce the thrombogenicity of BNC-SDVGs in the future.

Viscosity Measurement Sensor: A Prototype for a Novel Medical Diagnostic Method Based on Quartz Crystal Resonator

Viscosity variation in human fluids, such as Synovial Fluid (SF) or Cerebrospinal Fluid (CSF), can be used as a diagnostic factor; however, the sample volume obtained for analysis is usually small, making it difficult to measure its viscosity. On the other hand, Quartz Crystal Resonators (QCR) have been used widely in sensing applications due to their accuracy, cost, and size. This work provides the design and validation of a new viscosity measurement system based on quartz crystal resonators for low volume fluids, leading to the development of a sensor called “ViSQCT” as a prototype for a new medical diagnostic tool. The proposed method is based on measuring the resonance frequency at the crystal’s maximum conductance point through a frequency sweep, where crystals with 10 MHz fundamental resonance frequency were used. For validation purposes, artificial fluids were developed to simulate SFs and CFs in healthy and pathological conditions as experiment phantoms. A commercial QCR based system was also used for validation since its methodology differs from ours. A conventional rotational viscometer was used as a reference for calibration purposes. ViSQCT demonstrates the capability to measure the sample’s viscosity differentiation between healthy and pathological fluid phantoms and shows that it can be used as a basis for a diagnostic method of several pathologies related to the studied biological fluids. However, some performance differences between both QCR-based systems compared to the reference system deserves further investigation.

Endothelial progenitor cells as the target for cardiovascular disease prediction, personalized prevention, and treatments: progressing beyond the state-of-the-art

Stimulated by the leading mortalities of cardiovascular diseases (CVDs), various types of cardiovascular biomaterials have been widely investigated in the past few decades. Although great therapeutic effects can be achieved by bare metal stents (BMS) and drug-eluting stents (DES) within months or years, the long-term complications such as late thrombosis and restenosis have limited their further applications. It is well accepted that rapid endothelialization is a promising approach to eliminate these complications. Convincing evidence has shown that endothelial progenitor cells (EPCs) could be mobilized into the damaged vascular sites systemically and achieve endothelial repair in situ, which significantly contributes to the re-endothelialization process. Therefore, how to effectively capture EPCs via specific molecules immobilized on biomaterials is an important point to achieve rapid endothelialization. Further, in the context of predictive, preventive, personalized medicine (PPPM), the abnormal number alteration of EPCs in circulating blood and certain inflammation responses can also serve as important indicators for predicting and preventing early cardiovascular disease. In this contribution, we mainly focused on the following sections: the definition and classification of EPCs, the mechanisms of EPCs in treating CVDs, the potential diagnostic role of EPCs in predicting CVDs, as well as the main strategies for cardiovascular biomaterials to capture EPCs.

Immobilisation of an anti-platelet adhesion and anti-thrombotic drug (EP224283) on polydopamine coated vascular stent promoting anti-thrombogenic properties

Current vascular drug-eluting stents based on immuno-proliferative drugs would reduce the rate of in-stent restenosis (ISR) but may be associated with a higher risk of acute stent thrombosis due to non-selective activity. In this paper, we aimed to develop a polydopamine (PDA) coated chromium‑cobalt (CoCr) stent functionalised with EP224283 (Endotis Pharma SA), which combines both a GPIIbIIIa antagonist (tirofiban moiety) and a factor Xa inhibitor (idraparinux moiety) to reduce acute stent thrombosis. PDA-coated chromium‑cobalt (CoCr) samples were first immersed in a polyethylenimine (PEI, pH 8.5) solution to increase amine function density (36.0 ± 0.1 nmol/cm²) on the CoCr surface. In a second step, avidin was grafted onto CoCr-PDA-PEI through the biotin linkage (strategy 1) or directly by coupling reactions (strategy 2). The HABA titration proved the fixation of biotin onto CoCr-PDA-PEI surface with a density of 0.74 nmol/cm². The fixation of avidin was demonstrated by water contact angle (WCA) and surface plasmon resonance (SPR). SEM micrograph shows the flexibility of the thin layer coated onto the stent after balloon inflation. Independently of the strategy, a qualitative SEM analysis showed a reduction in platelet activation when the molecule EP224283 was immobilised on avidin. In parallel, the measurement of anticoagulant activity (anti-Xa) revealed a higher anti-factor Xa activity (2.24 IU/mL vs. 0.09 IU/mL in control) when EP224283 was immobilised on avidin. Interestingly, after seven days of degradation, the anticoagulant activity was persistent in both strategies and looked more important with the strategy 2 than in strategy 1. Throughout this work, we developed an innovative vascular stent through the immobilisation of EP224283 onto CoCr-PDA-PEI-(avidin) system, which provides a promising solution to reduce ISR and thrombosis after stent implantation.

Characterization of Photoluminescent Polylactone-Based Nanoparticles for Their Applications in Cardiovascular Diseases

Cardiovascular diseases (CVD) affect a large number of the population across the globe and are the leading cause of death worldwide. Nanotechnology-based drug delivery has currently offered novel therapeutic options to treat these diseases, yet combination of both diagnostic and therapeutic abilities is further needed to understand factors and/or mechanisms that affect the treatment in order to design better therapies to challenge CVD. Biodegradable photoluminescent polylactones (BPLPLs) enable to bridge this gap as these materials exhibit a stable, long-term intrinsic fluorescence as well as offers excellent cytocompatibility and biodegradability properties. Herein, we formulated three different BPLPL based nanoparticles (NPs), including BPLP-co-poly (L-lactic acid) (BPLPL-PLLA), BPLP-co-poly (lactic-co-glycolic acid) copolymers with lactic acid and glycolic acid ratios of 75:25 (BPLPL-PLGA75:25) and 50:50 (BPLPL-PLGA50:50), and extensively evaluated their suitability as theranostic nanocarriers for CVD applications. All BPLPL based NPs were <160 nm in size and had photoluminescence characteristics and tunable release kinetics of encapsulated protein model depending on polylactones copolymerized with BPLP materials. Compared to BPLPL-PLLA NPs, BPLPL-PLGA NPs demonstrated excellent stability in various formulations including deionized water, serum, saline, and simulated body fluid over 2 days. In vitro cell studies with human umbilical vein derived endothelial cells showed dose-dependent accumulation of BPLPL-based NPs, and BPLPL-PLGA NPs presented superior compatibility with endothelial cells in terms of viability with minimal effects on cellular functions such as nitric oxide production. Furthermore, all BPLPL NPs displayed hemocompatibility with no effect on whole blood kinetic profiles, were non-hemolytic, and consisted of comparable platelet responses such as platelet adhesion and activation to those of PLGA, an FDA approved material. Overall, our results demonstrated that BPLPL-PLGA based NPs have better physical and biological properties than BPLPL-PLLA; hence they have potential to be utilized as functional nanocarriers for therapy and diagnosis of CVD.

Robust, Highly Visible, and Facile Bioconjugation Colloidal Crystal Beads for Bioassay

High mechanical strength, highly visible, and admirable grafting molecular ability is the key challenge for colloidal photonic crystal (CPC) barcode beads in multiplex analysis fields. To achieve this goal, we proposed self-adhesion particles, polydopamine-coated SiO₂ nanoparticles (PDA@SiO₂), to construct CPC barcode beads by droplet-based microfluidic approach. Because of the adhesion, broad absorption of light, and "active" functional groups of PDA, the beads are endowed with high robustness, visibility, and excellent biomolecule immobilization. Ultrasonic treatment and compression experiments demonstrated that PDA@SiO₂ CPC barcode beads have a high mechanical strength. Color analysis illustrated that PDA@SiO₂ CPC beads exhibited a high visibility in color. The verification of fluorescent-tagged biomolecule conjugation together with the antigen detection stated that PDA@SiO₂ CPC beads are capable of immobilizing biomolecule by covalent binding. With a sandwich format, the beads were applied to analyze the tumor makers including alpha fetal protein, carcinoembryonic antigen, and prostate specific antigen from practical clinical serum. The proposed suspension arrays using PDA@SiO₂ CPC beads as a barcode showed acceptable accuracy and detection reproducibility.

Influence of Mussel-Derived Bioactive BMP-2-Decorated PLA on MSC Behavior in Vitro and Verification with Osteogenicity at Ectopic Sites in Vivo

Osteoinductive activity of the implant in bone healing and regeneration is still a challenging research topic. Therapeutic application of recombinant human bone morphogenetic protein-2 (BMP-2) is a promising approach to enhance osteogenesis. However, high dose and uncontrolled burst release of BMP-2 may introduce edema, bone overgrowth, cystlike bone formation, and inflammation. In this study, low-dose BMP-2 of 1 μg was used to design PLA-PD-BMP for functionalization of polylactic acid (PLA) implants via mussel-inspired polydopamine (PD) assist. For the first time, the binding property and efficiency of the PD coating with BMP-2 were directly demonstrated and analyzed using an antigen-antibody reaction. The obtained PLA-PD-BMP surface immobilized with this low BMP-2 dose can endow the implants with abilities of introducing strong stem cell adhesion and enhanced osteogenicity. Furthermore, in vivo osteoinduction of the PLA-PD-BMP-2 scaffolds was confirmed by a rat ectopic bone model, which is marked as the "gold standard" for the evidence of osteoinductive activity. The microcomputed tomography, Young's modulus, and histology analyses were also employed to demonstrate that PLA-PD-BMP grafted with 1 μg of BMP-2 can induce bone formation. Therefore, the method in this study can be used as a model system to immobilize other growth factors onto various different types of polymer substrates. The highly biomimetic mussel-derived strategy can therefore improve the clinical outcome of polymer-based medical implants in a facile, safe, and effective way.

Polydopamine Surface Chemistry: A Decade of Discovery

Polydopamine is one of the simplest and most versatile approaches to functionalizing material surfaces, having been inspired by the adhesive nature of catechols and amines in mussel adhesive proteins. Since its first report in 2007, a decade of studies on polydopamine molecular structure, deposition conditions, and physicochemical properties have ensued. During this time, potential uses of polydopamine coatings have expanded in many unforeseen directions, seemingly only limited by the creativity of researchers seeking simple solutions to manipulating surface chemistry. In this review, we describe the current state of the art in polydopamine coating methods, describe efforts underway to uncover and tailor the complex structure and chemical properties of polydopamine, and identify emerging trends and needs in polydopamine research, including the use of dopamine analogs, nitrogen-free polyphenolic precursors, and improvement of coating mechanical properties.

Increased affinity of endothelial cells to NiTi using ultraviolet irradiation: An in vitro study

Nickel-titanium alloy (NiTi) is one of the most popular materials used endovascularly because of its shape memory and superelasticity. The NiTi device needs to be covered by endothelial cells after being placed in the blood vessel to reduce ischemic complications. The objective of this study was to examine the impact of ultraviolet (UV) irradiation on the biocompatibility of NiTi surfaces with endothelial cells. NiTi sheets were treated with UV irradiation for 48 h and human aorta derived endothelial cells were used in this study. UV irradiation converted the NiTi surface to hydrophilic state and increased albumin adsorption. The number of endothelial cell migration, attachment, proliferation as well as their metabolic activity were significantly increased on UV treated NiTi. This study provides the first evidence of the photoactivation of NiTi surfaces by UV irradiation and demonstrates improved biocompatibility of UV-treated NiTi surfaces with vascular endothelial cells. These results suggest that UV irradiation may promote endothelialization of NiTi devices in blood vessels. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1034-1038, 2018.

Platelet Adhesion and Activation on Chiral Surfaces: The Influence of Protein Adsorption

Adsorbed proteins and their conformational change on blood-contacting biomaterials will determine their final hemocompatibility. It has frequently been reported that surface chirality of biomaterials may highly influence their protein adsorption behavior. Here, lysine and tartaric acid with different chirality were immobilized onto TiO₂ films respectively, and the influence of surface chirality on protein adsorption, platelet adhesion, and activation was also investigated. It showed that the l- and d-molecule grafted samples had almost the same grafting density, surface topography, chemical components, and hydrophilicity in this study. However, biological behaviors such as protein adsorption, platelet adhesion, and activation were quite different. The d-lysine grafted surface had a greater ability to inhibit both bovine serum albumin and fibrinogen adsorption, along with less degeneration of fibrinogen compared to the l-lysine anchored surface. However, the d-tartaric acid grafted surface adsorbed more protein but with less denatured fibrinogen compared to the l-tartaric acid grafted one. Further studies showed that the secondary structural change of the adsorbed albumin and fibrinogen on all surfaces with deduction of the α-helix content and increase of disordered structure, while the changing degree was apparently varied. As a result, the d-lysine immobilized surface absorbed less platelets and red blood cells and achieved slightly increased platelet activation. For tartaric acid anchored surfaces, a larger number of platelets adhered to the D-surface but were less activated compared to the L-surface. In conclusion, the surface chirality significantly influenced the adsorption and conformational change of blood plasma protein, which in turn influenced both platelet adhesion and activation.

Heparin/DNA aptamer co-assembled multifunctional catecholamine coating for EPC capture and improved hemocompatibility of vascular devices

Good hemocompatibility and rapid endothelialization are two key factors in the success of stent interventional therapy. In this study, aptamers with the ability to capture endothelial progenitors and anticoagulant molecular heparin were successfully immobilized on the surface of dopamine/polyethylenimine (PDA/PEI) copolymer coating via electrostatic interaction. The results of X-ray spectroscopy (XPS), water contact angle (WCA), and immunofluorescence staining tests confirmed the successful introduction of heparin and aptamers. Platelet adhesion and whole blood experiments demonstrated that the hemocompatibility of the co-modified surface was improved. Dynamic endothelial progenitor cell (EPC) capture experiments showed that the modified surfaces could effectively capture the endothelial progenitor in dynamic conditions. More importantly, ex vivo experiments revealed that the modified surfaces could regulate the distribution of CD34/vWF-positive cells on stent surfaces, and this was beneficial for the endothelialization of vascular stents. These results suggested that heparin and aptamer co-modified stents could capture EPCs and promote endothelialization. This surface co-modification strategy has great potential for enhancing stent development.

Evaluation of Hyaluronic Acid Dilutions at Different Concentrations Using a Quartz Crystal Resonator (QCR) for the Potential Diagnosis of Arthritic Diseases

The main objective of this article is to demonstrate through experimental means the capacity of the quartz crystal resonator (QCR) to characterize biological samples of aqueous dilutions of hyaluronic acid according to their viscosity and how this capacity may be useful in the potential diagnosis of arthritic diseases. The synovial fluid is viscous due to the presence of hyaluronic acid, synthesized by synovial lining cells (type B), and secreted into the synovial fluid thus making the fluid viscous. In consequence, aqueous dilutions of hyaluronic acid may be used as samples to emulate the synovial fluid. Due to the viscoelastic and pseudo-plastic behavior of hyaluronic acid, it is necessary to use the Rouse model in order to obtain viscosity values comparable with viscometer measures. A Fungilab viscometer (rheometer) was used to obtain reference measures of the viscosity in each sample in order to compare them with the QCR prototype measures.

Generating Aptamers Interacting with Polymeric Surfaces for Biofunctionalization

Common strategies for biofunctionalization of surfaces comprise the immobilization of bioactive molecules used as cell-binding ligands for cell recruitment. Besides covalent binding, multivalent noncovalent physical forces between substrate and ligand are an alternative way to equip surfaces with biomacromolecules. In this study, polymer binding ligands are screened by means of a DNA-based in vitro selection process. As candidate biomaterials poly(ether imide) (PEI), polystyrene, and poly[ethylene-co-(vinyl acetate)] are selected, due to their different chemical structure, but similar macroscopic interface properties, allowing physical interaction with nucleotide bases by varying valences. Multivalent interacting aptamers are successfully enriched by SELEX method and an area-wide surface functionalization is achieved, which can be used for further binding of bioactive molecules. In vitro selection against the polymers result in thymine-dominated aptamer binding motifs. The preferential interaction with thymine is attributed to its chemical structure, connected with a decreased electrostatic repulsion of the π-system and the hydrophobic character maximizing entropy. The aptamer binding stability correlates with available valences for interaction, resulting in a more stable functionalization of PEI.

Exploring the Behavior of Bovine Serum Albumin in Response to Changes in the Chemical Composition of Responsive Polymers: Experimental and Simulation Studies

Knowledge of the interactions between polymer and protein is very important to fabricate the potential materials for many bio-related applications. In this regard, the present work investigated the effect of copolymers on the conformation and thermal stability of bovine serum albumin (BSA) with the aid of biophysical techniques such as fluorescence spectroscopy, circular dichroism (CD) spectroscopy and differential scanning calorimetry (DSC). In comparison with that of copolymer PGA-1.5, our fluorescence spectroscopy results reveal that the copolymer PGA-1, which has a lower PEGMA/AA ratio, shows greater influence on the conformation of BSA. Copolymers induced unfolding of the polypeptide chain of BSA, which was confirmed from the loss in the negative ellipticity of CD spectra. DSC results showed that the addition of PGA-1 and PGA-1.5 (0.05% (w/v) decreased the transition temperature by 14.8 and 11.5 °C, respectively). The results from the present study on the behavior of protein in response to changes in the chemical composition of synthetic polymers are significant for various biological applications such as enzyme immobilization, protein separations, sensor development and stimuli-responsive systems.