Electrochemical sensor for bisphenol A based on ionic liquid functionalized Zn-Al layered double hydroxide modified electrode

Advanced experimental techniques for the sensitive detection of a toxic bisphenol A using UiO-66-NDC/GO-based electrochemical sensor

In the present study, a simple and sensitive method for detecting bisphenol A (BPA) in various environments, including groundwater, was described using a widespread electrochemical method. BPA is well-known for its endocrine-disrupting properties, which may cause potential toxicological effects oon the nervous, reproductive, and immune systems. A novel metal-organic framework (UiO-66-NDC/GO) was synthesized, and its existence was confirmed by several characterization techniques like FTIR, UV-visible, XRD, SEM-EDX, Raman spectroscopy, and TGA. Due to the excellent electrocatalytic nature, UiO-66-NDC/GO was chosen as the sensor material and integrated on the surface of the bare carbon paste electrode (BCPE). The UiO-66-NDC/GO modified carbon paste electrode (MCPE) was engaged for the detection of BPA using techniques like cyclic Voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The applied sensor exhibited an astonishing outcome for BPA detection with high sensitivity and selectivity. The lower detection limit (LLOD) of 0.025 μM was achieved at the modified sensor with a linear concentration range of 10-70 μM. Moreover, the practical applicability of the sensor was tested on tap water, drinking water, and fresh liquid milk, giving an excellent recovery of BPA in the range of 94.8-99.3 (v.%). The proposed method could be employed for electrochemical device or a solid state device fabrication for the onsite monitoring of BPA.

Aptamer-Adjusted Carbon Dot Catalysis-Silver Nanosol SERS Spectrometry for Bisphenol A Detection

Carbon dots (CDs) can be prepared from various organic (abundant) compounds that are rich in surfaces with –OH, –COOH, and –NH₂ groups. Therefore, CDs exhibit good biocompatibility and electron transfer ability, allowing flexible surface modification and accelerated electron transfer during catalysis. Herein, CDs were prepared using a hydrothermal method with fructose, saccharose, and citric acid as C sources and urea as an N dopant. The as-prepared CDs were used to catalyze AgNO₃–trisodium citrate (TSC) to produce Ag nanoparticles (AgNPs). The surface-enhanced Raman scattering (SERS) intensity increased with the increasing CDs concentration with Victoria blue B (VBB) as a signal molecule. The CDs exhibited a strong catalytic activity, with the highest activity shown by fructose-based CDs. After N doping, catalytic performance improved; with the passivation of a wrapped aptamer, the electron transfer was effectively disrupted (retarded). This resulted in the inhibition of the reaction and a decrease in the SERS intensity. When bisphenol A (BPA) was added, it specifically bound to the aptamer and CDs were released, recovering catalytical activity. The SERS intensity increased with BPA over the concentration range of 0.33–66.67 nmol/L. Thus, the aptamer-adjusted nanocatalytic SERS method can be applied for BPA detection.

Recent Advances in Layered Double Hydroxide-Based Electrochemical and Optical Sensors

Layered double hydroxides (LDHs) have attracted considerable attention as promising materials for electrochemical and optical sensors owing to their excellent catalytic properties, facile synthesis strategies, highly tunable morphology, and versatile hosting ability. LDH-based electrochemical sensors are affordable alternatives to traditional precious-metal-based sensors, as LDHs can be synthesized from abundant inorganic precursors. LDH-modified probes can directly catalyze or host catalytic compounds that facilitate analyte redox reactions, detected as changes in the probe's current, voltage, or resistance. The porous and lamellar structure of LDHs allows rapid analyte diffusion and abundant active sites for enhanced sensor sensitivity. LDHs can be composed of conductive materials such as reduced graphene oxide (rGO) or metal nanoparticles for improved catalytic activity and analyte selectivity. As optical sensors, LDHs provide a spacious, stable structure for synergistic guest-host interactions. LDHs can immobilize fluorophores, chemiluminescence reactants, and other spectroscopically active materials to reduce the aggregation and dissolution of the embedded sensor molecules, yielding enhanced optical responses and increased probe reusability. This review discusses standard LDH synthesis methods and overviews the different electrochemical and optical analysis techniques. Furthermore, the designs and modifications of exemplary LDHs and LDH composite materials are analyzed, focusing on the analytical performance of LDH-based sensors for key biomarkers and pollutants, including glucose, dopamine (DA), H2O2, metal ions, nitrogen-based toxins, and other organic compounds.

Development of highly sensitive and selective bisphenol A sensor based on a cobalt phthalocyanine-modified carbon paste electrode: application in dairy analysis

The development of an accurate, sensitive and selective sensor for the detection of bisphenol A (BPA) based on the incorporation of a new phthalocyanine derivative, cobalt phthalocyanine, C,C,C,C-tetracarboxylic acid-polyacrylamide (CoPc-PAA) into a carbon-paste matrix is presented using voltammetry and constant potential techniques. The influence of measuring parameters such as pH and scan rate on the analytical performance of the sensor was evaluated. Several kinetic parameters such as electron transfer number (n), charge transfer coefficient (α), electrode surface area (A) and diffusion coefficient (D) were also calculated. Under optimum conditions, particularly at pH 7.2, the BPA sensor resulted in a wide linear range from 25 × 10^-11 M to 2.5 × 10^-7 M and a limit of detection as low as 63.5 pM. Based on these findings, it can be concluded that our sensor can be substantially utilized for detecting BPA in spiked milk samples.

Flexible Carbon Electrodes for Electrochemical Detection of Bisphenol-A, Hydroquinone and Catechol in Water Samples

The detection of pollutant traces in the public water supply and aquifers is essential for the safety of the population. In this article, we demonstrate that a simple electrochemical procedure in acidic solution can be employed for enhancing the sensitivity of flexible screen-printed carbon electrodes (SPEs) to detect bisphenol-A (BPA), hydroquinone, and catechol, simultaneously. The SPEs were pretreated electrochemically in a H2SO4 solution, which did not affect their morphology, yielding high current signals with well separated oxidation peaks. The sensitivity values were 0.28, 0.230, and 0.056 µA L µmol−1 with detection limits of 0.12, 0.82, and 0.95 µmol L−1 for hydroquinone, catechol, and BPA, respectively. The sensors were reproducible and selective for detecting BPA in plastic cups, and with adequate specificity not to be affected by interferents from water samples. The simple, inexpensive, and flexible SPE may thus be used to detect emerging pollutants and monitor the water quality.

Laccase Electrochemical Biosensor Based on Graphene-Gold/Chitosan Nanocomposite Film for Bisphenol A Detection

Background:

Bisphenol A (BPA) is considered one of the most common chemicals that could cause environmental endocrine disrupting. Therefore, there is an increasing demand for simple, rapid and sensitive methods for BPA detection that result from BPA leaching into foods and beverages from storage containers. Herein, a simple laccase electrochemical biosensor was developed for the determination of BPA based on Screen-Printed Carbon Electrode (SPCE) modified graphenegold/ chitosan. The synergic effect of graphene-gold/chitosan nanocomposite as electrode modifier greatly facilitates electron-transfer processes between the electrolyte and laccase enzyme, thus leads to a remarkably improved sensitivity for bisphenol A detection.

Methods:

In this study, laccase enzyme is immobilized onto the Screen-Printed Carbon Electrode (SPCE) modified Graphene-Decorated Gold Nanoparticles (Gr-AuNPs) with Chitosan (Chit). The surface structure of nanocomposite was studied using different techniques including Field Emission Scanning Microscopy (FESEM), TRANSMISSION Electron Microscopy (TEM), Raman spectroscopy and Energy Dispersive X-ray (EDX). Meanwhile, the electrochemical performances of the modified electrodes were studied using Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV).

Results:

The developed laccase biosensor offered excellent analytical performance for the detection of BPA with a sensitivity of 0.271 μA/μM and Limit of Detection (LOD) of 0.023 μM, respectively. Moreover, the constructed biosensor showed good reproducibility, selectivity and stability towards BPA. The sensor has been used to detect BPA in a different type of commercial plastic products as a real sample and satisfactory result was obtained when compared with the HPLC method.

Conclusion:

The proposed electrochemical laccase biosensor exhibits good result which is considered as a promising candidate for a simple, rapid and sensitive method especially in the resource- limited condition.

Recent Trends in the Analysis of Chemical Contaminants in Beverages

Chemical contaminants should not be present in beverages for human consumption, but could eventually be ingested by consumers as they may appear naturally from the environment or be produced by anthropogenic sources. These contaminants could belong to many different chemical sources, including heavy metals, amines, bisphenols, phthalates, pesticides, perfluorinated compounds, inks, ethyl carbamate, and others. It is well known that these hazardous chemicals in beverages can represent a severe threat by the potential risk of generating diseases to humans if no strict quality control is applied during beverages processing. This review compiles the most updated knowledge of the presence of potential contaminants in various types of beverages (both alcoholic and non-alcoholic), as well as in their containers, to prevent undesired migration. Special attention is given to the extraction and pre-concentration techniques applied to these samples, as well as to the analytical techniques necessary for the determination of chemicals with a potential contaminant effect. Finally, an overview of the current legislation is carried out, as well as future trends of research in this field.

Facet-energy inspired metal oxide extended hexapods decorated with graphene quantum dots: sensitive detection of bisphenol A in live cells

The development of crystal-facet metal oxide heterostructures has been of great interest owing to their rational design and multifunctional properties at the nanoscale level. Herein, we report a facile solution-based method for the synthesis of single-crystal Cu₂O nanostructures (i.e. Cu₂O-CuO) as a core. Graphene quantum dots (GQDs) with varying concentrations are fabricated on the surface of Cu₂O extended hexapods (EHPs) in ethanol solution at room temperature via self-assembly, where copper acts as a sacrificial model and a stabilizer as well. The Cu₂O crystals displayed a good sensing activity toward BPA oxidation owing to their high energy facets, dangling bonds and great proportion of surface copper atoms. Structural, morphological, chemical and vibrational investigations were performed in detail, presenting high crystallinity of hybrid nanocomposites and Cu₂O-CuO heterojunction positions along with the growth of GQDs on the core of Cu₂O-CuO crystals. The electrochemical sensing performance of the as-fabricated Cu₂O-CuO@GQD EHPs was monitored for the determination of bisphenol A (BPA) as an early diagnostic marker and environmental contaminant. The synergistic effects of the boosted surface area, exposed Cu {111} crystallographic planes and mixed copper valences enhance redox reaction kinetics by increasing the electron shuttling rate at the electrode-analyte junction. Benefitting from the improved electrocatalytic activity for BPA oxidation, the electrochemical sensor displayed the lowest limit of detection (≤1 nM), good chemical stability, a broad linear range (2 nM-11 mM), and high sensitivity (636 μA mM^-1 cm^-2). The Cu₂O-CuO@GQD EHP-based sensing platform was used for BPA detection in water and human serum samples. We have also constructed a pioneering electrochemical sensing platform for BPA detection in live cells, which might be used as a marker for early disease diagnosis.

A Novel Sensitive Doxorubicin Hydrochloride Electrochemical Sensor Based on a Nickel Hexacyanoferrate/Ni-Al-LDH Modified Gold Electrode

A highly sensitive and selective electrochemical sensor has been fabricated by the electrodepositing of nickel hexacyanoferrate (NiHCF) on a Ni-Al layered double hydroxides (Ni-Al-LDH) modified Au electrode for the quantification of doxorubicin hydrochloride (DOX). The characterization of synthesized nanomaterials has been conducted by scanning electron microscopy, energy dispersive X-ray spectroscopy and electrochemical methods. The synergistic effect of NiHCF and Ni-Al-LDH not only excellently improves the performance of DOX electro-reduction, but also promotes electron transfer between DOX and the NiHCF/Ni-Al-LDH/Au sensor. The differential pulse voltammetric response of the NiHCF/Ni-Al-LDH/Au sensor shows a linear relationship with the concentration of DOX in the range of 1.0 × 10-8 - 6.2 × 10-6 mol L-1, a limit of detection of 1.9 × 10-9 mol L-1 (S/N = 3) and a sensibility of 14.71 A mol L-1 cm-2. The developed sensor exhibits good sensitivity, reproducibility, anti-interference and a long-term stability property. Furthermore, the NiHCF/Ni-Al-LDH/Au sensor has been successfully applied to determine DOX in biological samples and human blood serum samples.

Development of a new bisphenol A electrochemical sensor based on a cadmium(ii) porphyrin modified carbon paste electrode

In this study, the (5,10,15,20-tetrakis[(4-methoxyphenyl)]porphyrinato)cadmium(ii) complex ([Cd(TMPP)]) was successfully used as a modifier in a carbon paste electrode (CPE) and exploited for bisphenol A (BPA) detection. Analytical performance revealed two linear ranges from 0.0015–15 μM and 0.015–1.5 mM with a detection limit of 13.5 pM. The proposed method was implemented in water samples, which resulted in quantitative signals over the range 6.5–1000 μM with recoveries between 92.6 and 107.7% for tap water and between 96.6 to 106.0% for mineral water.

In this study, the (5,10,15,20-tetrakis[(4-methoxyphenyl)]porphyrinato)cadmium(ii) complex ([Cd(TMPP)]) was successfully used as a modifier in a carbon paste electrode (CPE) and exploited for bisphenol A (BPA) detection.

Zinc/Aluminium⁻Quinclorac Layered Nanocomposite Modified Multi-Walled Carbon Nanotube Paste Electrode for Electrochemical Determination of Bisphenol A

This paper presents the application of zinc/aluminium-layered double hydroxide-quinclorac (Zn/Al-LDH-QC) as a modifier of multiwalled carbon nanotubes (MWCNT) paste electrode for the determination of bisphenol A (BPA). The Zn/Al-LDH-QC/MWCNT morphology was examined by a transmission electron microscope and a scanning electron microscope. Electrochemical impedance spectroscopy was utilized to investigate the electrode interfacial properties. The electrochemical responses of the modified electrode towards BPA were thoroughly evaluated by using square-wave voltammetry technique. The electrode demonstrated three linear plots of BPA concentrations from 3.0 × 10⁻⁸–7.0 × 10⁻⁷ M (R² = 0.9876), 1.0 × 10⁻⁶–1.0 × 10⁻⁵ M (R² = 0.9836) and 3.0 × 10⁻⁵–3.0 × 10⁻⁴ M (R² = 0.9827) with a limit of detection of 4.4 × 10⁻⁹ M. The electrode also demonstrated good reproducibility and stability up to one month. The presence of several metal ions and organic did not affect the electrochemical response of BPA. The electrode is also applicable for BPA determination in baby bottle and mineral water samples with a range of recovery between 98.22% and 101.02%.

Preparation of chitosan/Co-Fe-layered double hydroxides and its performance for removing 2,4-dichlorophenol

Chitosan/Co-Fe-layered double hydroxides (CS/LDHs) were prepared by coprecipitation method, which is a kind of composite material with excellent properties. The structure of CS/LDHs was characterized by SEM, FTIR, and XRD, which proved that chitosan (CS) was successfully induced into hydrotalcite and CS/LDHs still possess the structural characteristics of hydrotalcite. The adsorption of 2,4-dichlorophenol (2,4-DCP) was studied with CS/LDHs and LDHs as adsorbent separately. The activity of immobilized laccase (L-CS/LDHs) with CS/LDHs as carrier is significantly better than that of the one (L-LDHs) using LDHs as carrier. Under the optimum conditions (pH = 6, 55 °C, 48 h), L-CS/LDHs exhibited better removal performance for 2,4-DCP (81.53%, 100 mg/L) than LDHs (63.55%); the removal of 2,4-DCP by L-CS/LDHs is excellent, exceeding 97% as its initial concentration below 60 mg/L. It includes the catalytic action of laccase and dechlorination of Fe³⁺ and Co²⁺, and the adsorption can be ignored under the optimal conditions. After 5 cycles, it maintained 67% (L-CS/LDHs) and 54% (L-LDHs) of the original removal.

Experimental development of a biosensor system to measure the concentration of phenol diluted in water using alternative sources of oxidoreductase enzymes

The presence of phenol in industrial wastewater is an issue of great relevance for petrochemical and energy companies, among others. The high toxicity level of this substance requires polluting industries to continuously monitor the concentration of phenol in their wastewaters so as to comply with environmental regulations and to minimize environmental impact. This research work proposes the experimental development of an analytical method for "in situ" measurement of the concentration of phenol diluted in water, with application in Oil & Gas production wastewater monitoring. The method is based on the principle of selectivity exhibited by the oxidoreductase enzymes in the presence of phenolic compounds. The differences in the performance found when using organic tissues and microorganisms, as natural alternative sources of the enzyme, are also highlighted. These alternative sources of oxidoreductase enzyme work as the recognition element of the biosensor. A dissolved oxygen sensor is used as the transducer of the chemical signal produced by the reaction between the analyte and the enzyme. The bioencapsulation technique is very adequate in this case, because it offers a nutrient medium to the microorganisms and is reusable, making it ideal for repetitive measurement applications. The results show that the biosensor exhibits an approximately linear behavior when measuring phenol concentrations from 0.2 to 2 ppm.

Study on a Novel Binary Zn n Eu Layered Double Hydroxide with Excellent Fluorescence

A group of binary Zn_nEu-LDHs with Zn²⁺/Eu³⁺ molar ratios of 5.0, 6.0, 7.0, and 8.0 have been obtained in ammonia water media by hydrothermal treatment. The structure, composition, and fluorescent property of samples have been investigated using various techniques. Compositional analyses revealed that the composition of samples was in agreement with that of the initial reactants. X-ray diffraction (XRD) suggested that the Zn_nEu-LDHs exhibited typical layered structure with orthorhombic symmetry. All the Zn_nEu-LDHs appeared strong red emissions attributed to ⁵D₀ → ⁷F _J (J = 1, 2) transitions of Eu³⁺. Moreover, the intensity of emissions due to ⁵D₀ → ⁷F_J (J = 1, 2) transitions of Eu³⁺ tended to increase with the Zn²⁺/Eu³⁺ molar ratio varied from 8.0, 7.0 to 6.0, then decreased as the Zn²⁺/Eu³⁺ molar ratio reduced to 5.0. The strongest fluorescence was found to be at Zn²⁺/Eu³⁺ molar ratio of 6.0. Further the fluorescence decay spectra show that the Zn _n Eu-LDH have similar behavior of fluorescent decay and decayed more slowly than that of the Eu(OH)₃. These results indicate that the novel binary Zn_nEu-LDHs have better fluorescent property and may be potential application as fluorescent materials.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.