Impact of alginate concentration on the viability, cryostorage, and angiogenic activity of encapsulated fibroblasts

The crystallization properties of antifreeze GelMA hydrogel and its application in cryopreservation of tissue-engineered skin constructs

Gelatin methacrylate (GelMA) hydrogels are expected to be ideal skin tissue engineering dressings for a wide range of clinical treatments. Herein, we report the preparation of GelMA or antifreeze GelMA hydrogel sheets with different GelMA concentrations, crosslinking times, and cryoprotectant (CPA) concentrations. The crystallization properties of GelMA or antifreeze GelMA hydrogel sheets were studied by cryomicroscopy and differential scanning calorimetry (DSC). It was found that the growth of ice crystals was slower when GelMA hydrogel concentration was more than 7%. The 10% DMSO-7% GelMA hydrogel sheets crosslinked for 60 min showed no ice crystal formation and growth during cooling and warming. The DSC results showed that the vitrification temperature of the 10% DMSO-7% GelMA hydrogel sheet was -111°C. Furthermore, slow freezing and rapid freezing of fibroblast-laden GelMA or antifreeze GelMA hydrogel sheets, and tissue-engineered skin constructs were studied. The results showed no significant difference in cell survival between slow (88.8% ± 1.51) and rapid (89.2% ± 3.00) freezing of fibroblast-loaded 10% DMSO-7% GelMA hydrogel sheets, and significantly higher than that of 7% GelMA hydrogel sheets (33.4% ± 5.46). The cell viability was higher in tissue-engineered skin constructs after slow freezing (86.34% ± 1.45) than rapid freezing (72.74% ± 1.34). We believe that the combination of antifreeze hydrogels and tissue engineering will facilitate the cryopreservation of tissue engineering constructs.

Improving the survival of Lactobacillus plantarum FZU3013 by phase separated caseinate/alginate gel beads

The phase separation behavior of mixed solution of caseinate (Cas) and alginate (Alg) was investigated. Lactobacillus plantarum FZU3013 was encapsulated using 4 % Cas/1 % Alg gel beads with a phase-separated structure. The bacteria were predominantly distributed in the Alg-rich continuous phase. The use of 4 % Cas/1 % Alg beads resulted in higher encapsulation efficiency for L. plantarum FZU3013 compared to 1 % Alg beads. After 5 weeks of storage at 4 °C, the viable count in 4 % Cas/1 % Alg beads was 8.3 log CFU/g, which was 1.1 log CFU/g higher than that of the 1 % Alg beads. When 1 % Alg beads of the smallest size were subjected to in vitro digestion, no viable bacteria could be detected at the end of the digestion, whereas the 4 % Cas/1 % Alg beads of the smallest size had a viable count of 3.9 log CFU/g. When the size of the 4 % Cas/1 % Alg beads was increased to 1000 μm, the viable count was 7.0 log CFU/g after digestion. The results of infrared spectroscopy and zeta potential indicated that hydrogen bonding and electrostatic interactions between caseinate and alginate reinforced the structure of the gel beads and improved the protection for L. plantarum FZU 3013.

Investigating the Interplay Between Matrix Compliance and Passaging History on Chondrogenic Differentiation of Mesenchymal Stem Cells Encapsulated Within Alginate-Gelatin Hybrid Hydrogels

Mesenchymal stem cells (MSCs) are used widely in tissue engineering and regenerative medicine because of their ease of isolation and their pluripotency. The low survival and retention rate of MSCs at the target site upon implantation can be addressed via encapsulation within hydrogels capable of directing their fate. In this study, the interplay between matrix mechanics and the passage number of MSCs on their chondrogenic differentiation was assessed. Human bone marrow-derived MSCs between passages 4 and 6 were encapsulated within alginate-gelatin hybrid gels. The stiffness of the gels was varied by varying alginate concentrations while maintaining the concentration of gelatin and consequently, the cell adhesion sites, constant. The study revealed that within 4.8 kPa gels, GAG deposition was higher by P4 MSCs compared to P6 MSCs. However, an opposite trend was observed with collagen type 2 deposition. Further, we observed enhanced chondrogenic differentiation upon encapsulation of MSCs within 6.7 kPa hydrogel irrespective of passaging history. However, the effect of matrix compliance was more prominent in the case of higher passaged MSCs suggesting that matrix stiffness can help rescue the reduced differentiation capability of these cells.

Generation of cell-laden GelMA microspheres using microfluidic chip and its cryopreservation method

Gelatin methacrylate (GelMA) hydrogels have been widely used in tissue engineering because of their excellent biological and physical properties. Here, we used a microfluidic flow-focusing chip based on polymethyl methacrylate to fabricate cell-laden GelMA hydrogel microspheres. Structures of the throat region and photo crosslinking region on the chip, flow rate ratio of GelMA and oil phase, and GelMA concentration were optimized to obtain the stable and suitable size of microspheres. Cell-laden GelMA microspheres can be cryopreserved by slow freezing and rapid freezing. The survival rate of encapsulated cells after rapid freezing was significantly higher than that of unencapsulated cells. There was no significant difference between the results of the rapid freezing of encapsulated cells with 5% DMSO and the traditional slow freezing of suspended cells with 10% DMSO. It demonstrates the possibility that GelMA hydrogel itself can replace some of the cryoprotective agents and has some protective effect on cells. Our study provides new ideas to optimize GelMA hydrogels for cell cryopreservation, facilitating the off-the-shelf availability of tissue-engineered constructs.

Alginate-Based 3D A549 Cell Culture Model to Study Paracoccidioides Infection

A three-dimensional (3D) lung aggregate model based on sodium alginate scaffolds was developed to study the interactions between Paracoccidioides brasiliensis (Pb) and lung epithelial cells. The suitability of the 3D aggregate as an infection model was examined using cell viability (cytotoxicity), metabolic activity, and proliferation assays. Several studies exemplify the similarity between 3D cell cultures and living organisms, which can generate complementary data due to the greater complexity observed in these designed models, compared to 2D cell cultures. A 3D cell culture system of human A549 lung cell line plus sodium alginate was used to create the scaffolds that were infected with Pb18. Our results showed low cytotoxicity, evidence of increased cell density (indicative of cell proliferation), and the maintenance of cell viability for seven days. The confocal analysis revealed viable yeast within the 3D scaffold, as demonstrated in the solid BHI Agar medium cultivation. Moreover, when ECM proteins were added to the alginate scaffolds, the number of retrieved fungi was significantly higher. Our results highlight that this 3D model may be promising for in vitro studies of host-pathogen interactions.

Alginate-based Composites Microspheres: Preparations and Applications for Bone Tissue Engineering

Alginate-based biomaterials have been extensively studied for bone tissue engineering. Scaffolds, microspheres, and hydrogels can be developed using alginate, which is biocompatible, biodegradable, and able to deliver growth factors and drugs. Alginate microspheres can be produced using crosslinking, microfluidic, three-dimensional printing, extrusion, and emulsion methods. The sizes of the alginate microspheres range from 10 µm to 4 mm. This review describes the chemical characterization and mechanical assessment of alginate-based microspheres. Combinations of alginate with hydroxyapatite, chitosan, collagen, polylactic acid, polycaprolactone, and bioglass were discussed for bone tissue repair and regeneration. In addition, alginate combinations with bone morphogenetic proteins, vascular endothelial growth factor, transforming growth factor beta-3, other growth factors, cells, proteins, drugs, and osteoinductive drugs were analyzed for tissue engineering applications. Furthermore, the biocompatibility of developed alginate microspheres was discussed for different cell lines. Finally, alginate microsphere-based composites with stem cell interaction for bone tissue regeneration were presented. In the present review, we have assessed the preclinical research on in vivo models of alginate-based microspheres for bone tissue repair and regeneration. Overall, alginate-based microspheres are potential candidates for graft substitutes and the treatment of various bone-related diseases.

Effects of Three-Dimensional Sodium Alginate Scaffold on Maturation and Developmental Gene Expressions in Fresh and Vitrified Preantral Follicles of Mice

BACKGROUND

Prior to chemotherapy interventions, n vitroi maturation (IVM) of folliclesthrough vitrification can be used to help young people conserve their fertility. The aim of s tudy was to inves tigate effect of sodium alginat scaffold on follicles development and improvement of the culture medium.

MATERIALS AND METHODS

This experimental study was conducted on immature female BALB/c mice (12-14 days). Follicles were gathered mechanically and placed in α-Minimal Essential Medium (α-MEM) containing 5% fetal bovine serum (FBS). Some pre-antral follicles were frozen. The fresh and vitrified follicles were cultured in different concentrations of sodium alginate (0.25%, 0.5%, and 1%) and two dimensional (2D) medium for 12 days. The samples were evaluated for viability percentage, the number of MII-phase oocytes and reactive oxygen specious (ROS) level. Additionally, Gdf9, Bmp15, Bmp7, Bmp4, Gpx, mnSOD and Gcs gene expressions were assessed in the samples.

RESULTS

The highest and lowest percentages of follicle viability and maturation in the fresh and vitrified groups were respectively 0.5% concentration and 2D culture. There was no significant difference among the concentrations of 0.25% and 1%. Viability and maturation of follicles showed a significant increase in the fresh groups in comparison with the vitrified groups. ROS levels in the both fresh and vitrified groups with different concentrations of alginate showed a significant decrease compared to the control group. ROS levels in follicles showed a significant decrease in the fresh groups in comparison with the vitrified groups (P≤0.0001). The highest gene expression levels were observed in the 0.5% alginate (P≤0.0001). Moreover, the viability percentage, follicle maturation, and gene expression levels were higher in the fresh groupsthan the vitrified groups (P≤0.0001).

CONCLUSION

Alginate hydrogel at a proper concentration of 5%, not only helps follicle get mature, but also promotes the expression of developmental genes and reducesthe level of intracellular ROS. Follicular vitrification decreases quality of the follicles, which are partially compensated using a three dimensional (3D) cell culture medium.

Impact of mesenchymal stem cell-secretome-loaded hydrogel on proliferative and migratory activities of hyperglycemic fibroblasts

Disruption of the reparative process, often found in diabetic patients, results in chronic, non-healing wounds that significantly impact a patient's quality of life. This highlights the need of new therapeutic options to improve the healing of diabetic wounds. In this study, we focused on developing a cell-free hydrogel dressing loaded with mesenchymal stem cell (MSC)-conditioned media (CM) to potentially improve the healing of hard-to-heal wounds. We simulated a hyperglycemic environment by incubating human dermal fibroblasts in a high glucose environment (30 mM) and validated that MSC-CM rescued the impaired functions (proliferation and migration) of hyperglycemic fibroblasts. Further, we investigated the effect of loading MSC-CM in gelatin methacrylate (GelMA)-poly (ethylene glycol) diacrylate (PEGDA) hybrid hydrogels in improving the proliferative activity of glucose-treated fibroblasts. The controlled release of bioactive factors from MSC-CM loaded GelMA-PEGDA hydrogels promoted the metabolic activity of hyperglycemic fibroblasts. In addition, the growth rate of hyperglycemic fibroblasts was found to be similar to that of normal fibroblasts. Our observations, thus, suggest the potential application of cell-free, MSC-secretome-loaded hydrogel in the healing of diabetic or chronic wounds.

Low Molecular Weight Gelators Based on Functionalized l-Dopa Promote Organogels Formation

We prepared the small pseudopeptide Lau-l-Dopa(OBn)2-d-Oxd-OBn (Lau = lauric acid; l-Dopa = l-3,4-dihydroxyphenylalanine; d-Oxd = (4R,5S)-4-methyl-5-carboxyl-oxazolidin-2-one; Bn = benzyl) through a number of coupling reactions between lauric acid, protected l-Dopa and d-Oxd with an excellent overall yield. The ability of the product to form supramolecular organogels has been tested with different organic solvents of increasing polarity and compared with the results obtained with the small pseudopeptide Fmoc-l-Dopa(OBn)2-d-Oxd-OBn. The mechanical and rheological properties of the organogels demonstrated solvent-dependent properties, with a storage modulus of 82 kPa for the ethanol organogel. Finally, to have a preliminary test of the organogels' ability to adsorb pollutants, we treated a sample of the ethanol organogel with an aqueous solution of Rhodamine B (RhB) for 24 h. The water solution slowly lost its pink color, which became trapped in the organogel.

A study of cryogenic tissue-engineered liver slices in calcium alginate gel for drug testing

To address issues such as transportation and the time-consuming nature of tissue-engineered liver for use as an effective drug metabolism and toxicity testing model, "ready-to-use" cryogenic tissue-engineered liver needs to be studied. The research developed a cryogenic tissue-engineered liver slice (TELS), which comprised of HepG2 cells and calcium alginate gel. Cell viability and liver-specific functions were examined after different cryopreservation and recovery culture times. Then, cryogenic TELSs were used as a drug-testing model and treated with Gefitinib. Cryogenic TELSs were stored at -80 °C to ensure high cell viability. During recovery in culture, the cells in the cryogenic TELS were evenly distributed, massively proliferated, and then formed spheroid-like aggregates from day 1 to day 13. The liver-specific functions in the cryogenic TELS were closely related to cryopreservation time and cell proliferation. As a reproducible drug-testing model, the cryogenic TELS showed an obvious drug reaction after treatment with the Gefitinib. The present study shows that the cryopreservation techniques can be used in drug-testing models.

Peptide-Based Physical Gels Endowed with Thixotropic Behaviour

Thixotropy is one of the oldest documented rheological phenomenon in colloid science and may be defined as an increase of viscosity in a state of rest and a decrease of viscosity when submitted to a constant shearing stress. This behavior has been exploited in recent years to prepare injectable hydrogels for application in drug delivery systems. Thixotropic hydrogels may be profitably used in the field of regenerative medicine, which promotes tissue healing after injuries and diseases, as the molten hydrogel may be injected by syringe and then self-adapts in the space inside the injection site and recovers the solid form. We will focus our attention on the preparation, properties, and some applications of biocompatible thixotropic hydrogels.

Optimization of alginate microcapsules containing cells overexpressing α-l-iduronidase using Box-Behnken design

Mucopolysaccharidosis type I (MPS I) is an autosomal recessive disease caused by deficiency of α-l-iduronidase (IDUA), which results in the lysosomal accumulation of glycosaminoglycans (GAG) leading to widespread clinical manifestations. The microencapsulation of IDUA overexpressing recombinant cells has been considered as a promising strategy for the treatment of MPS I. This study aimed at the optimization of alginate microcapsules containing recombinant BHK (Baby Hamster Kidney) cells (rBHK) overexpressing IDUA produced by electrostatic extrusion technique. The alginate microcapsule (MC-A) optimization study was carried out by means of an experimental Box-Behnken Design that allowed the simultaneous evaluation of the influence of voltage (kV), alginate/cell suspension flow (mL/h), and alginate concentration (%) on size and IDUA activity. The optimal conditions of voltage (10kV), flow (25mL/h), and alginate concentration (1.3%) made possible to obtain the smallest microcapsules showing the highest IDUA activity. After optimization, the microcapsules were sequentially coated with PLL and alginate (MC-APA) to increase their stability. MC-A and MC-APA presented monodisperse populations (span<1.22) with an average diameter of less than 350μm. The coating increased the mechanical stability of MC-APA by about 6-fold and modulated the permeability to the enzyme. Surface analyzes of MC-APA showed the presence of PLL bands, suggesting that the last alginate layer appears to have only partially coated the PLL. After 30days of subcutaneous implantation of the MC-APA microcapsules containing rBHK cells in a MPS I murine model, a significant increase in IDUA activity was observed in the skin near the implant. Histological analysis revealed an inflammatory infiltrate at the application site, which did not prevent the release of the enzyme under the conditions evaluated. Taken together, the overall results demonstrate the feasibility of MC-APA as a potential alternative for local treatment of MPS I.

Cryopreservation of Luciola praeusta Kiesenwetter (Coleoptera: Lampyridae) embryos by vitrification

There is an urgent need to preserve the ever-decreasing number of different species of fireflies all over the world. We sought to develop a vitrification procedure to cryopreserve the firefly embryos. The late stages of Luciola praeusta Kiesenwetter embryos were collected. Several impermeable and permeable protectants with various concentrations in different mediums (TNM-FH insect medium, Grace's medium, Dulbecco's Modification of Eagle's Medium (DMEM) and Dulbecco's Phosphate-Buffered Saline (DPBS)) were used. Embryos culturing in TNM-FH medium yielded the highest survival rate of 75.3 ± 3.6%. One-step, two-step and three-step methods were used in equilibrium procedure respectively. The highest survival rate (73.7% ±3.2%) occurred in embryos treated by three-step method ((1.5 M ethylene glycol (EG) + 2 M EG plus 8% polyvinylpyrrolidone (PVP) + 3 M EG, 8% PVP and 15% trehalose). Additionally, embryos exposed to 0.5 M trehalose presented a significantly higher survival rate (71.8 ± 2.7%) than embryos preserved in 0.5 M sucrose.

Preservation and stability of cell therapy products: recommendations from an expert workshop

If the field of regenerative medicine is to deliver therapies, rapid expansion and delivery over considerable distances to large numbers of patients is needed. This will demand efficient stabilization and shipment of cell products. However, cryopreservation science is poorly understood by life-scientists in general and in recent decades only limited progress has been made in the technology of preservation and storage of cells. Rapid translation of new developments to a broader range of cell types will be vital, as will assuring a deeper knowledge of the fundamental cell biology relating to successful preservation and recovery of cell cultures. This report presents expert consensus on these and other issues which need to be addressed for more efficient delivery of cell therapies.

Thixotropic Peptide-Based Physical Hydrogels Applied to Three-Dimensional Cell Culture

Pseudopeptides containing the d-Oxd or the d-pGlu [Oxd = (4R,5S)-4-methyl-5-carboxyl-oxazolidin-2-one, pGlu = pyroglutamic acid] moiety and selected amino acids were used as low-molecular-weight gelators to prepare strong and thixotropic hydrogels at physiological pH. The addition of calcium chloride to the gelator solutions induces the formation of insoluble salts that get organized in fibers at a pH close to the physiological one. Physical characterization of hydrogels was carried out by morphologic evaluation and rheological measurements and demonstrated that the analyzed hydrogels are thixotropic, as they have the capability to recover their gel-like behavior. As these hydrogels are easily injectable and may be used for regenerative medicine, they were biologically assessed by cell seeding and viability tests. Human gingival fibroblasts were embedded in 2% hydrogels; all of the hydrogels allow the growth of encapsulated cells with a very good viability. The gelator toxicity may be correlated with their tendency to self-assemble and is totally absent when the hydrogel is formed.