Soluble eggshell membrane: A natural protein to improve the properties of biomaterials used for tissue engineering applications

Fiber/hydrogel hybrid wound dressing based on eggshell membrane containing postbiotic ingredients

Skin is the largest organ in body which has important functions. Therefore, to have a healthy skin is very essential, and wound dressings are specifically designed to promote the wound healing process. The aim of this study is to prepare and characterize a fiber-hydrogel wound dressing based on eggshell membrane (ESM) enriched with postbiotic compounds extracted from Lactobacillus plantarum NIMBB003 bacteria. For this purpose, ESM was effectively separated from eggshells through acidic treatment. Then, ultrasound was used for an optimal duration of 1.89 min at 95 % of device's power to expand the pore size of ESM from 6.89 to 10.84 μm to enhance hydrogel infiltration into ESM. The hydrogel (alginate and oxidized alginate) was then infiltrated into the ESM. ATR, SEM, and weight measurement of samples showed the proper infiltration of the hydrogel within the ESM structure. However, biostability analysis revealed that alginate hydrogel was more stable in the hybrid structure compared to oxidase alginate hydrogel. Alginate infiltration into ESM, improved the ultimate strength of the ESM to 1.89 ± 0.17 MPa and water uptake degree to 368.05 % ± 24.34 %. The water vapor transmission rate of the designed dressing was 34.14 ± 1.05 mg/cm2 after 72 h, which means the proper moist management in wound bed. Finally, addition of postbiotics at a concentration of 10 mg/ml into the hydrogel improved cell proliferation in five days. Furthermore, human dermal fibroblast cells adhered to the wound dressings properly and spread along the fibers of the ESM. In general, the developed wound dressing composed of natural biomaterials with extracellular matrix-like structure, can be used effectively to assist the wound healing process.

Development of a Multilayer Film Including the Soluble Eggshell Membrane Fraction for the Treatment of Oral Mucosa Lesions

BACKGROUND/OBJECTIVES

Oral diseases causing mucosal lesions are normally treated with local or systemic anti-inflammatory, analgesic and antimicrobial agents. The development of topical formulations, including wound-healing promoters, might speed up the recovery process, improving patients' quality of life, and reduce the risk of deterioration in health conditions. In this study, a mucoadhesive multilayer film, including a novel biocompatible substance (solubilized eggshell membrane, SESM), was rationally designed.

METHODS

The SESM preparation procedure was optimized and its biological effects on cell proliferation and inflammation marker gene expression were evaluated in vitro; preformulation studies were conducted to identify the most promising polymers with film-forming properties; then, trilayer films, consisting of an outer layer including chlorhexidine digluconate as a model drug, a supporting layer and a mucoadhesive layer, incorporating SESM, were prepared using the casting method and their mechanical, adhesion and drug release control properties were evaluated.

RESULTS

SESM proved to possess a notable wound-healing capacity, inducing a wound closure of 84% in 24 h without inhibiting blood clotting. The films revealed a maximum detachment force from porcine mucosa of approx. 1.7 kPa and maximum in vivo residence time of approx. 200-240 min; finally, they released up to 98% of the loaded drug within 4 h.

CONCLUSIONS

The formulated trilayer films were found to possess adequate properties, making them potentially suitable for protecting oral lesions and favoring their rapid healing, while releasing antimicrobial substances that might be beneficial in reducing the risk of bacterial infections.

Eggshell membrane and green seaweed (Ulva lactuca) micronized powders for in vivo diabetic wound healing in albino rats: a comparative study

BACKGROUND

Nonhealing diabetic wounds are a serious complication associated with extremely lethargic wound closure and a high risk of infection, leading to amputation or limb loss, as well as substantial health care costs and a poor quality of life for the patient. The effects of either eggshell membrane (ESM) and green seaweed (Ulva lactuca) extracts alone or in combination were evaluated for in vivo skin wound healing in a rat model of induced diabetes.

METHODS

Micronized powders of waste hen ESM, Ulva lactuca, and their 1:1 mixture were prepared using regular procedures. The mechanical, electrical, and surface morphology characteristics of powders were examined using direct compression, LCR-impedancemetry, and scanning electron microscopy. The effect of ESM, Ulva lactuca, and their mixture as compared to standard Dermazin treatments were evaluated on wounds inflicted on male Wistar Albino rats with induced diabetes. Quantitative wound healing rates at baseline and at 3, 7, 14, and 21 days of treatments among all rat groups were conducted using ANOVA. Qualitative histological analysis of epidermal re-epithelization, keratinocytes, basement membrane, infiltrating lymphocytes, collagen fibrines, and blood vessels at day 21 were performed using Image J processing program.

RESULTS

Compressive strength measurements of tablets showed a Young's modulus of 44.14 and 27.17 MPa for the ESM and ESM + Ulva lactuca mixture, respectively. Moreover, both samples exhibited relatively low relative permittivity values of 6.62 and 6.95 at 1 MHz, respectively, due to the porous surface morphology of ESM shown by scanning electron microscopy. On day 21, rats treated with ESM had a complete diabetic wound closure, hair regrowth, and a healing rate of 99.49%, compared to 96.79% for Dermazin, 87.05% for Ulva lactuca, 90.23% for the mixture, and only 36.44% for the negative controls. A well-formed basement membrane, well-differentiated epithelial cells, and regular thick keratinocytes lining the surface of the epidermal cells accompanied wound healing in rats treated with ESM, which was significantly better than in control rats.

CONCLUSION

Ground hen ESM powder, a low-cost effective biomaterial, is better than Ulva lactuca or their mixture for preventing tissue damage and promoting diabetic wound healing, in addition to various biomedical applications.

Stimulated Full-Thickness Cutaneous Wound Healing with Bioactive Dressings of Zinc and Cobalt Ion-Doped Bioactive Glass-Coated Eggshell Membranes in a Diabetic Rabbit Model

Eggshell membrane-based biomedical applications have recently received great attention for their wound-healing properties. However, there are limited studies on diabetic wound healing. In this regard, we devised four types of composite eggshell membrane mats with nanoscale coatings of bioactive glass/Zn/Co-doped bioactive glass (ESM + BAG, ESM + ZnBAG, ESM + CoBAG, and ESM + ZnCoBAG) as wound-dressing materials for chronic nonhealing diabetic wounds. A detailed study of the physicochemical properties of the mats was conducted. In vitro studies demonstrated cytocompatibility and viability of human dermal fibroblasts on all four types of mats. The cells also attached finely on the mats with the help of cellular extensions, as evident from scanning electron microscopy (SEM) and rhodamine-phalloidin and Hoechst 33342 staining of cellular components. Endowed with bioactive properties, these mats influenced all aspects of full-thickness skin wound healing in diabetic animal model studies. All of the mats, especially the ESM + ZnCoBAG mat, showed the earliest wound closure, effective renewal, and restructuring of the extracellular matrix in terms of an accurate and timely accumulation of collagen, elastin, and reticulin fibers. Hydroxyproline and sulfated glycosaminoglycans were significantly (p < 0.01, p < 0.05) higher in ESM-ZnCoBAG-treated wounds in comparison to ESM-BAG-treated wounds, which suggests that these newly developed mats have potential as an affordable diabetic wound care solution in biomedical research.

3D Printed Eggshell Microparticle-Laden Thermoplastic Scaffolds for Bone Tissue Engineering

Three-dimensional (3D) printing, an additive manufacturing technique, is increasingly used in the field of tissue engineering. The ability to create complex structures with high precision makes the 3D printing of this material a preferred method for constructing personalized and functional materials. However, the challenge lies in developing affordable and accessible materials with the desired physiochemical and biological properties. In this study, we used eggshell microparticles (ESPs), an example of bioceramic and unconventional biomaterials, to reinforce thermoplastic poly(ε-caprolactone) (PCL) scaffolds via extrusion-based 3D printing. The goal was to conceive a sustainable, affordable, and unique personalized medicine approach. The scaffolds were fabricated with varying concentrations of eggshells, ranging from 0 to 50% (w/w) in the PCL scaffolds. To assess the physicochemical properties, we employed scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction analysis. Mechanical properties were evaluated through compression testing, and degradation kinetics were studied through accelerated degradation with the remaining mass ranging between 89.4 and 28.3%. In vitro, we evaluated the characteristics of the scaffolds using the MC3T3-E1 preosteoblasts over a 14 day period. In vitro characterization involved the use of the Alamar blue assay, confocal imaging, and real-time quantitative polymerase chain reaction. The results of this study demonstrate the potential of 3D printed biocomposite scaffolds, consisting of thermoplastic PCL reinforced with ESPs, as a promising alternative for bone-graft applications.

Harnessing potential of avian eggshell membrane derived collagen hydrolysate for bone tissue regeneration

BACKGROUND

Natural bone grafts are the highly preferred materials for restoring the lost bone, while being constrained of donor availability and risk of disease transmission. As a result, tissue engineering is emerging as an efficacious and competitive technique for bone repair. Bone tissue engineering (TE) scaffolds to support bone regeneration and devoid of aforesaid limitations are being vastly explored and among these the avian eggshell membrane has drawn attention for TE owing to its low immunogenicity, similarity with the extracellular matrix, and easy availability.

METHODOLOGY AND RESULTS

In this study, the development of bone ingrowth support system from avian eggshell membrane derived collagen hydrolysates (Col-h) is reported. The hydrolysate, cross-linked with glutaraldehyde, was developed into hydrogels with poly-(vinyl alcohol) (PVA) by freeze-thawing and further characterized with ATR-FTIR, XRD, FESEM. The biodegradability, swelling, mechanical, anti-microbial, and biocompatibility evaluation were performed further for the suitability in bone regeneration. The presence of amide I, amide III, and -OH functional groups at 1639 cm- 1,1264 cm- 1, and 3308 cm- 1 respectively and broad peak between 16°-21° (2θ) in XRD data reinstated the composition and form.

CONCLUSIONS

The maximum ratio of Col-h/PVA that produced well defined hydrogels was 50:50. Though all the hydrogel matrices alluded towards their competitive attributes and applicability towards restorative bone repair, the hydrogel with 40:60 ratios showed better mechanical strength and cell proliferation than its counterparts. The prominent E. coli growth inhibition by the hydrogel matrices was also observed, along with excellent biocompatibility with MG-63 osteoblasts. The findings indicate strongly the promising application of avian eggshell-derived Col-h in supporting bone regeneration.

Preparation and optimization of an eggshell membrane-based biomaterial for GTR applications

OBJECTIVES

Guided Tissue Regeneration (GTR) is a popular clinical procedure for periodontal tissue regeneration. However, its key component, the barrier membrane, is largely collagen-based and is still quite expensive, posing a financial burden to the patients as well as healthcare systems and negatively impacting the patient's decision-making. Thus, our aim is to prepare a novel biomimetic GTR membrane utilizing a natural biomaterial, soluble eggshell membrane protein (SEP), which is economical as it comes from an abundant industrial waste from food and poultry industries, unlike collagen. Additive polymer, poly (lactic-co-glycolic acid) (PLGA), and a bioceramic, nano-hydroxyapatite (HAp), were added to improve its mechanical and biological properties.

METHODS

For this barrier membrane preparation, we initially screened the significant factors affecting its mechanical properties using Taguchi orthogonal array design and further optimized the significant factors using response surface methodology. Furthermore, this membrane was characterized using SEM, EDAX, and ATR-FTIR, and tested for proliferation activity of human periodontal ligament fibroblasts (HPLFs).

RESULTS

Optimization using response surface methodology predicted that the maximal tensile strength of 3.1 MPa and modulus of 39.9 MPa could be obtained at membrane composition of 8.9 wt% PLGA, 7.2 wt% of SEP, and 2 wt% HAp. Optimized PLGA/SEP/HAp membrane specimens that were electrospun on a static collector showed higher proliferation activity of HPLFs compared to tissue culture polystyrene and a commercial collagen membrane.

SIGNIFICANCE

From the results observed, we can conclude that SEP-based nanofibrous GTR membrane could be a promising, environment-friendly, and cost-effective alternative for commercial collagen-based GTR membrane products.

Robust Piezoelectric Biomolecular Membranes from Eggshell Protein for Wearable Sensors

Flexible and wearable devices are drawing increasing attention due to their promising applications in energy harvesting and sensing. However, the application of wearable devices still faces great challenges, such as flexibility, repeatability, and biodegradability. Biopiezoelectric materials have been regarded as favorable energy-harvesting sources due to their nontoxicity and biocompatibility. Here, a wearable and biodegradable sensor is proposed to monitor human activities. The proposed sensor is fabricated via a low-cost, facile, and scalable electrospinning technology from nanofibers composed of eggshell membranes mixed with polyethylene oxide. It is shown that the sensor exhibits excellent flexibility, outstanding degradability, and mechanical stability over 3000 cycles under periodic stimulation. The device displays multiple potential applications, including the recognition of different objects, human motion monitoring, and active voice recognition. Finally, it is shown that the composite nanofiber membrane has good degradability and breathability. With excellent sensing performance, environmental friendliness, and ease of processing, the eggshell membrane-based sensor could be a promising candidate for greener and more environmentally friendly devices for application in implantable and wearable electronics.

Advances in eggshell membrane separation and solubilization technologies

Eggshell membranes (ESM) contain 90% protein, 3% lipids, 2% sugars, and small amounts of minerals such as calcium and magnesium. Of the 90% of proteins present, 472 proteins species have been identified. ESM provide the initial mineralization platform for eggshell formation, and can be used for to produce adsorbents, cosmetics, and medical products because of their special physical structure and chemical composition. The special physical structure of the eggshell membrane, with disulfide bonds between and within the protein molecules and the cross-linking of lysine-derived and heterochain chains between the eggshell membrane, makes the membrane very difficult to dissolve, with a maximum solubility rate of only 62%. Also, the insolubility of ESM limits its development and use also any related research. Based on the physical structure and chemical composition of the eggshell membrane, this paper reviews the latest research on eggshell membrane separation and membrane protein solubilization to provide a reference for promoting the separation, dissolution, and rational development and use of the avian eggshell membrane.

Eggshell Membrane as a Biomaterial for Bone Regeneration

The physicochemical features of the avian eggshell membrane play an essential role in the process of calcium carbonate deposition during shell mineralization, giving rise to a porous mineralized tissue with remarkable mechanical properties and biological functions. The membrane could be useful by itself or as a bi-dimensional scaffold to build future bone-regenerative materials. This review focuses on the biological, physical, and mechanical properties of the eggshell membrane that could be useful for that purpose. Due to its low cost and wide availability as a waste byproduct of the egg processing industry, repurposing the eggshell membrane for bone bio-material manufacturing fulfills the principles of a circular economy. In addition, eggshell membrane particles have has the potential to be used as bio-ink for 3D printing of tailored implantable scaffolds. Herein, a literature review was conducted to ascertain the degree to which the properties of the eggshell membrane satisfy the requirements for the development of bone scaffolds. In principle, it is biocompatible and non-cytotoxic, and induces proliferation and differentiation of different cell types. Moreover, when implanted in animal models, it elicits a mild inflammatory response and displays characteristics of stability and biodegradability. Furthermore, the eggshell membrane possesses a mechanical viscoelastic behavior comparable to other collagen-based systems. Overall, the biological, physical, and mechanical features of the eggshell membrane, which can be further tuned and improved, make this natural polymer suitable as a basic component for developing new bone graft materials.

Eggshell membrane-incorporated cell friendly tough hydrogels with ultra-adhesive property

Adhesive and tough hydrogels have received increased attention for their potential biomedical applications. However, traditional hydrogels have limited utility in tissue engineering because they tend to exhibit low biocompatibility, low adhesiveness, and poor mechanical properties. Herein, the use of the eggshell membrane (ESM) for developing tough, cell-friendly, and ultra-adhesive hydrogels is described. The ESM enhances the performance of the hydrogel network in three ways. First, its covalent cross-linking with the polyacrylamide and alginate chains strengthens the hydrogel network. Second, it provides functional groups, such as amine and carboxyl moieties, which are well known for enhancing the surface adhesion of biomaterials, thereby increasing the adhesiveness of the hydrogel. Third, it is a bioactive agent and improves cell adhesion and proliferation on the constructed scaffold. In conclusion, this study proposes the unique design of ESM-incorporated hydrogels with high toughness, cell-friendly, and ultra-adhesive properties for various biomedical engineering applications.

Advancement in "Garbage In Biomaterials Out (GIBO)" concept to develop biomaterials from agricultural waste for tissue engineering and biomedical applications

Presently on a global scale, one of the major concerns is to find effective strategies to manage the agricultural waste to protect the environment. One strategy that has been drawing attention among the researchers is the development of biocompatible materials from agricultural waste. This strategy implies successful conversion of agricultural waste products (e.g.: cellulose, eggshell etc.) into building blocks for biomaterial development. Some of these wastes contain even bioactive compounds having biomedical applications. The replacement and augmentation of human tissue with biomaterials as alternative to traditional method not only bypasses immune-rejection, donor scarcity, and maintenance; but also provides long term solution to damaged or malfunctioning organs. Biomaterials development as one of the key challenges in tissue engineering approach, resourced from natural origin imparts better biocompatibility due to closely mimicking composition with cellular microenvironment. The "Garbage In, Biomaterials Out (GIBO)" concept, not only recycles the agricultural wastes, but also adds to biomaterial raw products for further product development in tissue regeneration. This paper reviews the conversion of garbage agricultural by-products to the biocompatible materials for various biomedical applications.

Graphical abstract

The agro-waste biomass processed, purified, modified, and further utilized for the fabrication of biomaterials-based support system for tissue engineering applications to grow living body parts in vitro or in vivo.

Parameter Screening and Optimization for a Polycaprolactone-Based GTR/GBR Membrane Using Taguchi Design

Our objective was to determine and optimize the significant parameters affecting mechanical properties and mean fiber diameter (MFD) of a novel GTR/GBR membrane composed of polycaprolactone (PCL) and chicken eggshell membrane (ESM). For this, we prepared electrospun membrane specimens (n = 16) with varying concentrations of PCL, ESM, nano-hydroxyapatite (HAp), and altered electrospinning parameters as generated by DOE++ software. After the determination of MFD and mechanical properties for all specimens, Taguchi orthogonal array L8 design was used to screen significant factors affecting the MFD and mechanical properties. PCL wt%, ESM wt%, HAp wt%, applied voltage (AV), flow rate (FR), and spinneret-collector distance (SCD) were the independent variables investigated. The response variables analyzed were MFD, tensile strength (TS), and elastic modulus. ANOVA outlined ESM wt%, HAp wt%, AV, FR, SCD, and an interactive effect between PCL wt% and AV to be the significant factors affecting modulus values of an electrospun PCL/ESM membrane (p < 0.05). Furthermore, concentrations of PCL and ESM were the significant factors affecting MFD (p < 0.05) and there were no significant factors affecting the TS values. Optimization using DOE++ software predicted that the maximal TS of 3.125 MPa, modulus of 278.168 MPa, and MFD of 882.75 nm could be achieved.

Egg Shell Membrane as an Alternative Vascular Patch for Arterial Angioplasty

Introduction: The egg shell membrane (ESM) is always considered as waste, but recent studies have shown that it has the potential to yield rapid re-endothelialization in vitro. We hypothesized that ESM and heparin-conjugated ESM (HESM) can be used as arterial patch in a rat aortic angioplasty model.

Method: Sprague-Dawley rat (200 g) abdominal aortic patch angioplasty model was used. Decellularized rat thoracic aorta (TA) patch was used as the control; ESM patch was made of raw chicken egg; heparin-coated ESM (HESM) patch was made by using dopamine; anticoagulation properties were verified using platelet adhesion tests; the TA, ESM, and HESM patches were implanted to the rat aorta and harvested at day 14; and the samples were examined by immunohistochemistry and immunofluorescence.

Result: The ESM patch showed a similar healing process to the TA patch; the cells could migrate and infiltrate into both patches; there was a neointima with von Willebrand factor-positive endothelial cells; the endothelial cells acquired arterial identity with Ephrin-B2- and dll-4-positive cells; there were proliferating cell nuclear antigen (PCNA)-positive cells, and PCNA and alpha smooth muscle actin dual-positive cells in the neointima in both groups. Heparin was conjugated to the patch successfully and showed a strong anticoagulation property in vitro. HESM could decrease mural thrombus formation after rat aortic patch angioplasty.

Conclusion: The ESM is a natural scaffold that can be used as a vascular patch; it showed a similar healing process to decellularized TA patch; HESM showed anticoagulation property both in vitro and in vivo; and the ESM may be a promising vascular graft in the clinic.

Synthesis and Characterization of Calcium Phosphate Materials Derived from Eggshells from Different Poultry with and without the Eggshell Membrane

Calcium phosphate materials such as hydroxyapatite (HA) or tricalcium phosphate (β-TCP) are highly attractive due to their multitude of applications in bone replacement as well as their environmental and ecological credentials. In this research, quail, hen, duck, and pigeon eggshells were used as a calcium source to obtain calcium phosphate materials via the environmentally friendly wet synthesis. Using the eggshells with the organic membrane, the biphasic calcium phosphate materials composed mainly of HA were obtained. The second mineral phase was β-TCP in the case of using quail, hen, and pigeon eggshells and octacalcium phosphate (OCP) in the case of duck eggshells. The HA content in the obtained materials depended on the amount of membrane in the eggshells and decreased in the order of pigeon, duck, hen, and quail eggshells. The eggshell membrane removal from the eggshells caused the reduced content of HA and the presence of the more soluble β-TCP or OCP phase in the obtained materials. The calcium ions release profile in the PBS buffer indicates the potential biomedical application of these materials.

Waste-derived biomaterials as building blocks in the biomedical field

Recent developments in the biomedical arena have led to the fabrication of innovative biomaterials by utilizing bioactive molecules obtained from biological wastes released from fruit and beverage processing industries, and fish, meat, and poultry industries. These biological wastes that end up in water bodies as well as in landfills are an affluent source of animal- and plant-derived proteins, bio ceramics and polysaccharides such as collagens, gelatins, chitins, chitosans, eggshell membrane proteins, hydroxyapatites, celluloses, and pectins. These bioactive molecules have been intricately designed into scaffolds and dressing materials by utilizing advanced technologies for drug delivery, tissue engineering, and wound healing relevance. These biomaterials are environment-friendly, biodegradable, and biocompatible, and show excellent tissue regeneration attributes. Additionally, being cost-effective they can reduce the burden on the healthcare system as well as provide a sustainable solution to waste management. In this review, the current trends in the utilization of plant and animal waste-derived biomaterials in various biomedical fields are considered along with a separate section on their applications as xenografts.

Preparation and Characterization of Antibacterial Films with Eggshell-Membrane Biopolymers Incorporated with Chitosan and Plant Extracts

A series of films containing chitosan (CS), eggshell membrane (ESM), soluble eggshell membrane (SEP), and plant extracts from Thymus vulgaris and Origanum valgare were prepared with varying concentrations and compositions. These novel films were characterized extensively with respect to film thickness and uniformity, solution absorption, degradation, microenvironmental pH, and antibacterial properties. All the films were flexible with appropriate mechanical stability. After 48 h of soaking in a lysozyme solution, all the films degraded 64 ± 4%, which would be expected to allow for the release of the plant extracts. The plant extracts on their own showed a pH of approximately 4, with the blended films having microenvironmental pHs from approximately 6.4–7.0, which would be expected to promote wound healing. A CS-ESM-SEP film with 5% of each plant extract inhibited almost all E. coli growth in liquid cultures and had no detriments to fluid absorption. Fluid absorption was approximately 100–150% by weight for all the films. The incorporation of SEP and plant extracts to a CS-ESM film provides a promising and novel method for the incorporation of SEP and antibacterial agents in a film with no detriment to wound fluid absorption or film degradation.

Thermally assisted conversion of biowaste into environment-friendly energy storage materials for lithium-ion batteries

This study reports the thermally assisted solid-state synthesis of a cathode comprising a biowaste-derived nitrogen-doped carbon coating on LiFePO₄ (LFP) for Li-ion batteries. The eggshell membrane (ESM), which mainly consists of collagen, is converted into nitrogen-doped carbon with good ionic and electrical conductivity during thermally driven decomposition. The ESM-coated LFP (ESM@LFP) containing pyrrolic nitrogen, pyridinic nitrogen, and oxidized pyridinic nitrogen has been motivated to improve its ionic and electrical conductivity, that promotes the movement of Li-ions and electrons on the LFP surface. ESM@LFP exhibits stable cyclability and ~16.3% of increased specific discharge capacity for 100 cycles at a current rate of 1C compared to bare LFP.

Eggshell Microparticle Reinforced Scaffolds for Regeneration of Critical Sized Cranial Defects

Scaffold-based approaches for bone regeneration have been studied using a wide range of biomaterials as reinforcing agents to improve the mechanical strength and bioactivity of the 3D constructs. Eggshells are sustainable and inexpensive materials with unique biological and chemical properties to support bone differentiation. The incorporation of eggshell particles within hydrogels yields highly osteoinductive and osteoconductive scaffolds. This study reveals the effects of microparticles of whole eggshells, eggshells without a membrane, and a pristine eggshell membrane on osteogenic differentiation in protein-derived hydrogels. The in vitro studies showed that gels reinforced with eggshells with and without a membrane demonstrated comparable cellular proliferation, osteogenic gene expression, and osteogenic differentiation. Subsequently, in vivo studies were performed to implant eggshell microparticle-reinforced composite hydrogel scaffolds into critical-sized cranial defects in Sprague Dawley (SD) rats for up to 12 weeks to study bone regeneration. The in vivo results showed that the eggshell microparticle-based scaffolds supported an average bone volume of 60 mm³ and a bone density of 2000 HU 12 weeks post implantation. Furthermore, histological analyses of the explanted scaffolds showed that the eggshell microparticle-reinforced scaffolds permitted tissue infiltration and induced bone tissue formation over 12 weeks. The histology staining also indicated that these scaffolds induced significantly higher bone regeneration at 6 and 12 weeks as compared to the blank (no scaffold) and pristine gel scaffolds. The eggshell microparticle-reinforced scaffolds also supported significantly higher bone formation, remodeling, and vascularization over 6 and 12 weeks as confirmed by immunohistochemistry analysis. Collectively, our results indicated that eggshell microparticle-reinforced scaffolds facilitated significant bone regeneration in critical-sized cranial defects.

Preparation and evaluation of polycaprolactone/chitosan/Jaft biocompatible nanofibers as a burn wound dressing

Tissue engineering is an emerging method for replacing damaged tissues. In this study, the potential application of electrospun polycaprolactone/chitosan/ the internal layer of oak fruit (Jaft) as skin scaffolds was investigated. A combination of Polycaprolactone (PCL), chitosan (CH), and the internal layer of oak fruit (Jaft) was used to incorporate mechanical properties of synthetic polymers, biological properties of natural polymers, and antibacterial activity of Jaft. Physical and morphological characteristics of prepared scaffolds were investigated using a scanning electron microscope (SEM), mechanical analysis, swelling ratio, and contact angle. Moreover, chemical and biological properties were evaluated by Fourier-transform infrared spectroscopy (FTIR), chromatography, flow cytometry, DAPI staining, MTT assay, and trypan blue exclusion assay. Obtained results demonstrated that the fabricated scaffolds have good mechanical properties. Moreover, the addition of chitosan and Jaft to the PCL scaffolds improved their water absorption capacity as well as surface hydrophilicity. MTT results showed the fabricated nanofibrous scaffolds have adequate cell viability, which is higher than the cell culture plate at each time point of culture. Furthermore, SEM images of cultured scaffolds, trypan blue exclusion assay, and DAPI staining confirmed that fibroblast cells could be well-attached and proliferate on the PCL/CH/Jaft scaffolds. Results have proven that this novel bioactive scaffold has promising mechanical properties, suitable biocompatibility in vitro, and in vivo. Consequently, it could be a promising candidate for skin tissue engineering applications.

Recent Advances in Applications of Bioactive Egg Compounds in Nonfood Sectors

Egg, a highly nutritious food, contains high-quality proteins, vitamins, and minerals. This food has been reported for its potential pharmacological properties, including antibacterial, anti-cancer, anti-inflammatory, angiotensin-converting enzyme (ACE) inhibition, immunomodulatory effects, and use in tissue engineering applications. The significance of eggs and their components in disease prevention and treatment is worth more attention. Eggs not only have been known as a "functional food" to combat diseases and facilitate the promotion of optimal health, but also have numerous industrial applications. The current review focuses on different perceptions and non-food applications of eggs, including cosmetics. The versatility of eggs from an industrial perspective makes them a potential candidate for further exploration of several novel components.

Avian Egg: A Multifaceted Biomaterial for Tissue Engineering

Most components in avian eggs, offering a natural and environmentally friendly source of raw materials, hold great potential in tissue engineering. An avian egg consists of several beneficial elements: the protective eggshell, the eggshell membrane, the egg white (albumen), and the egg yolk (vitellus). The eggshell is mostly composed of calcium carbonate and has intrinsic biological properties that stimulate bone repair. It is a suitable precursor for the synthesis of hydroxyapatite and calcium phosphate, which are particularly relevant for bone tissue engineering. The eggshell membrane is a thin protein-based layer with a fibrous structure and is constituted of several valuable biopolymers, such as collagen and hyaluronic acid, that are also found in the human extracellular matrix. As a result, the eggshell membrane has found several applications in skin tissue repair and regeneration. The egg white is a protein-rich material that is under investigation for the design of functional protein-based hydrogel scaffolds. The egg yolk, mostly composed of lipids but also diverse essential nutrients (e.g., proteins, minerals, vitamins), has potential applications in wound healing and bone tissue engineering. This review summarizes the advantages and status of each egg component in tissue engineering and regenerative medicine, but also covers their current limitations and future perspectives.

A bilayered skin substitute developed using an eggshell membrane crosslinked gelatin-chitosan cryogel

Commercially available allografts and xenografts pose problems such as high cost, risk of infection transmission and immune rejection of grafts. Thus, bioengineered skin substitutes fabricated from natural biomaterials or synthetic polymers are currently the focus of skin tissue engineering. In this study, eggshell membrane (ESM) powder was used to crosslink a gelatin-chitosan cryogel thereby replacing glutaraldehyde, a known cytotoxic chemical crosslinker. The resultant ESM-crosslinked macroporous cryogel with a pore size ranging between 10 and 350 μm has improved flexibility, biodegradability and biocompatibility compared to a glutaraldehyde-crosslinked cryogel. For healing of large and deep wounds, bilayered scaffolds which exhibit key aspects of skin physiology are being explored. Hence, we fabricated a bilayered substitute by coupling the ESM-crosslinked cryogel (dermal equivalent) to a non-porous, physically-crosslinked gelatin-chitosan film (epidermal equivalent). The epidermal layer provides the requisite barrier properties while the dermal layer facilitates cell attachment and migration for optimal wound healing. Further, chitosan confers antibacterial properties to the cryogel with almost 50% reduction in bacterial viability. Animal studies confirm that the developed bilayered skin substitute is non-allergic, aids wound healing by improving re-epithelialization within 14 days and supports the formation of skin appendages. This system presents a new and alternative treatment option for burn and chronic wounds.

Preparation, characterization, and antibacterial properties of hybrid nanofibrous scaffolds for cutaneous tissue engineering

Since polymeric nanofibrous scaffolds have been widely used in tissue regeneration, the risk of bacterial infections should not be neglected. In the present work, poly-caprolactone-silk fibroin-soluble eggshell membrane-silver nanoparticles (PCL-SF-SESM-AgNPs) and caprolactone-silk fibroin-soluble eggshell membrane-chitosan (PCL-SF-SESM-CS) scaffolds were fabricated via the electrospinning method for cutaneous regeneration. The composition, morphology, hydrophilicity, and mechanical features of prepared scaffolds were evaluated using Fourier transform infrared (FT-IR), scanning electron microscope (SEM), tensile, and water contact angle tests. The existence of AgNPs in PCL/SF/SESM/AgNPs nanofibers was confirmed by UV-visible, Transmission electron microscopes (TEM), and X-Ray Diffraction (XRD) patterns. Besides, cell adhesion, proliferation, and differentiation process of cutaneous progenitor cells, namely basal cell carcinoma (BCCs), toward keratinocyte-like cells were evaluated using MTT analysis, DAPI, Immunofluorescence imaging (IF), and Real-Time Quantitative Reverse Transcription PCR (QRT-PCR) assay. The results indicated that prepared nanofibrous mats are appropriate candidates for cutaneous regeneration and in advanced in vivo applications could be used. Lastly, the antimicrobial potential of prepared nanofibers against microorganisms such as E. coli, S. aureus, and C. Albicans was analyzed using the disc diffusion method. Results revealed that chitosan-containing nanofibrous scaffolds indicate inhibition against S. aureus, but PCL-SF-SESM as control group not. In addition, against C. albicans any antifungal activity was not observed.

Beneficial effect on rapid skin wound healing through carboxylic acid-treated chicken eggshell membrane

At the initial stage of wound healing, growth factors stimulate tissue regeneration by interacting with the extracellular matrix (ECM), leading to rapid wound repair and structural support. Chicken eggshell membrane (ESM) is a low-cost and highly functional ECM biomaterial for tissue regeneration. However, natural ESM has limitations for tissue engineering purposes because it is difficult to control the size, shape, and biocompatibility of the surfaces. To overcome this, blends of synthetic materials and natural ESMs, such as soluble eggshell membrane protein, are combined for biomaterial applications. Unfortunately, it is difficult to pattern fibrous structure. Here, we modified the natural chicken ESM through weak acid treatment to promote wound healing and skin regeneration without loss of fibrous structure. Treatment of citric acid and acetic acid reacted the amine or amide group with carboxyl groups (R-COOH) and achieved hydrophilicity for adherence of proliferating regenerative cells. Our in vitro study revealed that the modified ESM scaffolds significantly promoted human dermal fibroblasts adhesion, viability, proliferation, and cytokine secretion, compared with natural ESM. In addition, the modified ESM accelerated skin regeneration and enhanced the wound healing process even at early stages in an in vivo rat wound model. Collectively, the modified ESM performed best for promoting skin regeneration, cytokine secretion, epidermal cell proliferation, and controlling the inflammatory response both in vitro and in vivo.

A review on recent advances of egg byproducts: Preparation, functional properties, biological activities and food applications

The rapid development of egg industries produced vast byproducts that have not been effectively used. In this paper, the comprehensive utilization of egg byproducts was reviewed. Protein extraction and enzymatic hydrolysis were the main used ways for recycle of egg byproducts. The fact that eggshell membrane could accelerate would healing and improve facial skin of healthy people for 12 weeks was found. However, salted egg white had poor functional properties owing to high salt and ultrafiltration was an effective technology to remove 92.93% of salt. Moreover, Defatted yolk protein had the great potential to be used as food additives and functional foods. Other egg byproducts such as egg inhibitor and eggshells also were discussed. The novel applications of egg byproducts in the food field included food additives, feeds, food packaging materials and nutraceuticals based on current knowledge, but the proportion needed to be improved. This paper would provide a new insight for comprehensive utilization of egg byproducts.

Eggshell MembraneBased Turmeric Extract Loaded Orally Disintegrating Films

BACKGROUND

The increasing interest in using natural bioactive compounds as new drug candidates and their low solubility led to designing and developing novel drug delivery systems. Out of those, orally disintegrating films (ODFs) are a very eminent drug delivery system among pediatrics and geriatrics.

OBJECTIVE

In our study, the solvent casting method was used to prepare eggshell membrane-based and turmeric extract loaded orally disintegrating films.

METHOD

Characterization of the prepared films was done with FTIR, AFM, and SEM analysis. The release profile of the turmeric extract was determined and fitted to the mathematical models.

RESULTS

AFM results showed that the best interaction between components was achieved in Film-2. The highest cumulative release percentage was obtained for the film with 7.5 % (w/w) turmeric extract (Film-2) as 41.98% based on the HPLC measurements. The Higuchi model was the best-fitted model for Film-2.

CONCLUSION

In this study, SEP and CMCH were used for the first time as biopolymers to prepare the orally disintegrating film. Turmeric extract was successfully integrated into films prepared from SEP and CMCH.

The Use of Natural Materials in Film Coating for Controlled Oral Drug Release

BACKGROUND

Although synthetic materials have been used in film coating processes for drug delivery for many years, substantial studies on natural materials have also been conducted because of their biodegradable and unique properties.

METHODS

Because of the ability to form and modify films for controlled oral drug delivery, increasing attention has been shown to these materials in the design of film coating systems in recent research.

RESULTS

This review aims to provide an overview of natural materials focusing on film coating for oral delivery, specifically in terms of their classification and their combinations in film coating formulations for adjusting the desired properties for controlled drug delivery.

CONCLUSIONS

Discussing natural materials and their potential applications in film coating would benefit the optimization of processes and strategies for future utilization.

Eggshell membranes coated chitosan decorated with metal nanoparticles for the catalytic reduction of organic contaminates

This study focusses on the effect of chitosan coating with eggshell membranes for the reduction of different organic pollutants. Chickens eggs were collected from the local market and utilized to extract the enrich eggshell membranes (ESM). The chicken eggshell membranes are abundant waste material which is inexpensive and illustrates remarkable physiognomies for many possible applications. Fresh fibers/strips coated by chitosan (CS) were prepared by mixing the eggshell membranes with CS solution (2 wt%/v) in different proportions i.e., 10 %, 30 %, 50 %, 60 %, 70 %, 80 %, and 90 %. These strips were then templated with copper and iron metal nanoparticles by putting them in their metal ions aqueous solution to adsorb the metals ions and were then reduced to zero-valent metal nanoparticles (MNPS) by using NaBH₄ aqueous solution. These prepared materials (MNPS@ESM-CS) were characterized by using XRD, XPS, FE-SEM, and EDS to confirm the successful preparation of MNPs over the surface of ESM coated with CS. Afterwards, these prepared materials were investigated as a catalyst for the reduction of different organic pollutants, such as 4-nitroaniline (4-NA), 4-nitrophenol (4-NP) and methylene blue (MB) dye. The catalytic efficiency of ESM was enhanced 5.7-fold by adding only 20 % CS solution. It was observed that Cu@ESM-CS-80 % took 7 min for reduction of 4-NA, 6 min for 4-NP, and 7 min for MB dye. The reusability of the catalytic strip was also investigated for four cycles and found efficient and can be easily recovered by simply pulling it from the reaction mixture.

Utilization of Eggshell Membrane and Olive Leaf Extract for the Preparation of Functional Materials

Eggshell membrane (ESM) is a natural proteinaceous by-product of the food industry, especially in the pasteurized egg industry, resulting in the availability of much discarded egg waste. In the literature, eggshell (ES) and ESM usage for their adsorbent properties to remove various organic and inorganic hazardous chemicals, especially from wastewater, has gained interest. In addition, agricultural (olive leaf) and food industry (eggshell and eggshell membrane) waste can together be valorized to produce value-added functional products. This study’s objective was to evaluate the eggshell membrane’s loading capacity for bioactive compounds obtained from olive leaf extract (OLE) in order to prepare functional biomaterial. In this study, waste eggshell membranes were used to adsorb the phenolic compounds from olive leaf extract to design functional biomaterials. Using the foam separation method, both separation of the eggshell membrane and adsorption of bioactive compounds to the eggshell membrane were achieved simultaneously. The characterization studies showed that OLE was successfully adsorbed to the eggshell membrane. Cytotoxicity and antimicrobial studies showed that prepared OLE-loaded membranes were functional materials with bioactive properties. In conclusion, ESM was determined as a promising protein in the production of functional antioxidative and antimicrobial food or dietary supplement after the adsorption of bioactive olive leaf polyphenols.

Preparation of multilayer electrospun nanofibrous scaffolds containing soluble eggshell membrane as potential dermal substitute

Electrospinning of natural and synthetic polymers has shown to be a great candidate for the fabrication of tissue engineering scaffolds due to their similarity to the nanofibrous structure of natural extracellular matrix (ECM). Moreover, the addition of ECM-like proteins could enhance the biocompatibility of these scaffolds. In this study, soluble eggshell protein (SEP) was first extracted and synthesized from the raw eggshell membrane. The characteristics and biocompatibility of the extracted SEP were evaluated using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis and 3-(4,5- dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide) (MTT) assay. For scaffolds fabrication, a three-layer nanofibrous composite structure was produced using the electrospinning technique. The outer layers composed of polyvinyl alcohol, chitosan, and extracted SEP while the middle layer composed of polyethylene oxide, gelatin, and zinc oxide nanoparticles (ZnO-NPs). For each layer, the electrospinning parameters were adjusted to form bead-free fibers. To improve fibers' stability against body fluids, the produced fibers were crosslinked using glutaraldehyde vapor. Several techniques such as scanning electron microscopy (SEM), energy dispersive X-ray, ATR-FTIR, swelling, tensile test, in vitro biodegradation, and MTT assay were implemented to evaluate the physical, chemical, and biological characterization of the fabricated fibers. The results showed that crosslinked fibers have adequate stability in water, suitable mechanical properties, and promising water uptake capacity. The MTT results also revealed that SEP and ZnO-NPs could increase scaffolds biocompatibility. Moreover, SEM photographs of cultured fibroblasts cells on the scaffolds showed that cells were well attached on the scaffolds and preserve their natural spindle shapes. Altogether, our findings demonstrated that the produced three-layer composite scaffolds are potential candidates for skin tissue engineering.

Eggshell membrane as a bioactive agent in polymeric nanotopographic scaffolds for enhanced bone regeneration

A bone regeneration scaffold is typically designed as a platform to effectively heal a bone defect while preventing soft tissue infiltration. Despite the wide variety of scaffold materials currently available, such as collagen, critical problems in achieving bone regeneration remain, including a rapid absorption period and low tensile strength as well as high costs. Inspired by extracellular matrix protein and topographical cues, we developed a polycaprolactone-based scaffold for bone regeneration using a soluble eggshell membrane protein (SEP) coating and a nanotopography structure for enhancing the physical properties and bioactivity. The scaffold exhibited adequate flexibility and mechanical strength as a biomedical platform for bone regeneration. The highly aligned nanostructures and SEP coating were found to regulate and enhance cell morphology, adhesion, proliferation, and differentiation in vitro. In a calvaria bone defect mouse model, the scaffolds coated with SEP applied to the defect site promoted bone regeneration along the direction of the nanotopography in vivo. These findings demonstrate that bone-inspired nanostructures and SEP coatings have high potential to be applicable in the design and manipulation of scaffolds for bone regeneration.

State-of-the-Art of Eggshell Waste in Materials Science: Recent Advances in Catalysis, Pharmaceutical Applications, and Mechanochemistry

Eggshell waste is among the most abundant waste materials coming from food processing technologies. Despite the unique properties that both its components (eggshell, ES, and eggshell membrane, ESM) possess, it is very often discarded without further use. This review article aims to summarize the recent reports utilizing eggshell waste for very diverse purposes, stressing the need to use a mechanochemical approach to broaden its applications. The most studied field with regards to the potential use of eggshell waste is catalysis. Upon proper treatment, it can be used for turning waste oils into biodiesel and moreover, the catalytic effect of eggshell-based material in organic synthesis is also very beneficial. In inorganic chemistry, the eggshell membrane is very often used as a templating agent for nanoparticles production. Such composites are suitable for application in photocatalysis. These bionanocomposites are also capable of heavy metal ions reduction and can be also used for the ozonation process. The eggshell and its membrane are applicable in electrochemistry as well. Due to the high protein content and the presence of functional groups on the surface, ESM can be easily converted to a high-performance electrode material. Finally, both ES and ESM are suitable for medical applications, as the former can be used as an inexpensive Ca2+ source for the development of medications, particles for drug delivery, organic matrix/mineral nanocomposites as potential tissue scaffolds, food supplements and the latter for the treatment of joint diseases, in reparative medicine and vascular graft producing. For the majority of the above-mentioned applications, the pretreatment of the eggshell waste is necessary. Among other options, the mechanochemical pretreatment has found an inevitable place. Since the publication of the last review paper devoted to the mechanochemical treatment of eggshell waste, a few new works have appeared, which are reviewed here to underline the sustainable character of the proposed methodology. The mechanochemical treatment of eggshell is capable of producing the nanoscale material which can be further used for bioceramics synthesis, dehalogenation processes, wastewater treatment, preparation of hydrophobic filters, lithium-ion batteries, dental materials, and in the building industry as cement.

A new bioremediation method for removal of wastewater containing oils with high oleic acid composition: Acinetobacter haemolyticus lipase immobilized on eggshell membrane with improved stabilities

As a result of the increasing demand for edible oils, which are an important part of human nutrition, in recent years, serious environmental problems may arise both during the production and after consumption of these oils.

Structure and properties of edible packaging film prepared by soy protein isolate-eggshell membrane conjugates loaded with Eugenol

In this study, we reported a facile and economical strategy for producing a functional protein-based composite film that was based on soybean protein isolate (SPI), eggshell membrane (ESM) and eugenol (Eu). The composite films were also characterized by mechanical, water vapor permeability (WVP), UV barrier, water resistance, hydrophobicity, antioxidant and antimicrobial activity. The results suggested the appropriate content of ESM could significantly enhance the mechanical, barrier, water resistance and hydrophobicity performances of the film. The addition of Eu into the SPI/ESM film could improve not only these properties, but also antimicrobial and antioxidant properties. The intermolecular interaction between SPI, ESM and Eu was mainly hydrogen bond confirmed by the Fourier-transform infrared spectroscopy (FTIR). The scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated a good compatibility existed between SPI and ESM, and the Eu could be well emulsified and dispersed into the SPI/ESM film matrices network. Such edible films carried potentially developed in active packaging applications.

Biomimetic Composite Scaffold Based on Naturally Derived Biomaterials

This paper proposes the development of a biomimetic composite based on naturally derived biomaterials. This freeze-dried scaffold contains a microwave-synthesized form of biomimetic hydroxyapatite (HAp), using the interwoven hierarchical structure of eggshell membrane (ESM) as bio-template. The bone regeneration capacity of the scaffold is enhanced with the help of added tricalcium phosphate from bovine Bone ash (BA). With the addition of Gelatin (Gel) and Chitosan (CS) as organic matrix, the obtained composite is characterized by the ability to stimulate the cellular response and might accelerate the bone healing process. Structural characterization of the synthesized HAp (ESM) confirms the presence of both hydroxyapatite and monetite phases, in accordance with the spectroscopy results on the ESM before and after the microwave thermal treatment (the presence of phosphate group). Morphology studies on all individual components and final scaffold, highlight their morphology and porous structure, characteristics that influence the biocompatibility of the scaffold. Porosity, swelling rate and the in vitro cytotoxicity assays performed on amniotic fluid stem cells (AFSC), demonstrate the effective biocompatibility of the obtained materials. The experimental results presented in this paper highlight an original biocomposite scaffold obtained from naturally derived materials, in a nontoxic manner.

A novel egg-shell membrane based hybrid nanofibrous scaffold for cutaneous tissue engineering

Background

The main issue in cutaneous regeneration is to develop engineered scaffolds based on natural extracellular matrix to promote dynamics of skin progenitor cells and accelerate differentiation into mature keratinocytes.

Methods

In this study, nanofibrous scaffolds composed of a blend poly (ɛ-caprolactone) (PCL), silk fibroin (SF), soluble eggshell membrane (SESM), and Aloe vera (AV) gel were developed by electrospinning method and human basal cells were used to examine differentiation capacity toward keratinocyte-like cells. For this propose, cells were allocated to four distinct groups; control, PCL/SF, PCL/SF/SESM, and PCL/SF/SESM/AV. In all groups, cells were incubated with differentiation medium. Morphology, composition, hydrophilicity and mechanical features of PCL/SF, PCL/SF/SESM and PCL/SF/SESM/AV nanofibers were studied by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), water contact angle and tensile tests. To examine the orientation of basal cells to mature keratinocytes, we performed immunofluorescence analysis by monitoring cytokeratin-19. The expression of genes such as involucrin, keratin-14 and -5 was monitored by real-time PCR assay.

Results

PCL/SF, PCL/SF/SESM, and PCL/SF/SESM/AV had suitable physic chemical indices and biological activities to be applied as biomimetic scaffolds for the restoration cutaneous tissue. Compared to control, we found an increased basal cell proliferation at 7 and 14 days after plating on scaffolds and reach maximum levels in group PCL/SF/SESM/AV on day 14 (p < 0.05). Electron microscopy showed cell flattening, morphological adaptation. An integrated cell-to-cell connection was generated after cell seeding on scaffolds in all groups. Immunofluorescence imaging showed the ability of basal cells to synthesize cytokeratin-19 in PCL/SF, PCL/SF/SESM, and positive control cells after exposure to differentiation medium. However, these values were less in PCL/SF/SESM/AV compared to other groups. Real-time PCR analysis showed the potency of all scaffolds to induce the transcription of involucrin, keratin-14 and -5, especially involucrin in PCL/SF/SESM/AV group compared to the negative control.

Conclusion

Modulation of scaffolds with natural biopolymers could enable us to synthesize structures appropriate for cutaneous regeneration.

Thickness-Tunable Eggshell Membrane Hydrolysate Nanocoating with Enhanced Cytocompatibility and Neurite Outgrowth

The eggshell membrane is one of the easily obtainable natural biomaterials, but has been neglected in the biomaterial community, compared with marine biomaterials and discarded as a food waste. In this work, we utilized the ESM hydrolysate (ESMH), which was obtained by the enzymochemical method, as a bioactive functional material for interfacial bioengineering, exemplified by thickness-tunable, layer-by-layer (LbL) nanocoating with the Fe(III)-tannic acid (TA) complex. [Fe(III)-TA/ESMH] LbL films, ending with the ESMH layer, showed great cytocompatiblility with HeLa cells and even primary hippocampal neuron cells. More importantly, the films were found to be neurochemically active, inducing the acceleration of neurite outgrowth for the long-term neuron culture. We believe that the ability for building cytocompatible ESMH films in a thickness-tunable manner would be applicable to a broad range of different nanomaterials in shape and size and would be utilized with multimodal functionalities for biomedical applications, such as bioencapsulation, theranostics, and regenerative medicine.

Development of an antibacterial nanobiomaterial for wound-care based on the absorption of AgNPs on the eggshell membrane

To develop a promising antibacterial agent for wound-care dressing, a series of silver nanoparticles (AgNPs) and eggshell membrane (ESM) composites (AgNPs/ESM) were prepared. AgNPs were prepared using a chemical reduction method and their characteristics were determined. Various pH and processing time combinations were tested to find the optimal conditions for preparing AgNPs/ESM composites. To obtain the optimal nontoxic-level silver release, the AgNPs stock solution was diluted to 2 times, 4 times, 6 times, 8 times and 10 times with water and the concentration of silver released by the composites was also tested. All the prepared composites showed antibacterial activity, but the activity was the strongest when the stock AgNPs solution was diluted to four times (a concentration of silver was 2.41 mg/L). The addition of AgNPs changed the ESM from hydrophobic to hydrophilic by lowering the water contact angles from 105° to 75°, which is important for the wound-healing process. And the AgNPs/ESM composites had a higher surface area (159.08 m²/g) than the natural ESM (24.32 m²/g) and a suitable pore size (10.92 nm) as well, endowing with better absorption and antibacterial abilities. These findings suggested that the AgNPs/ESM composites are promising candidates for the development of antimicrobial agent for biomedical devices and therapeutic applications, such as wound-healing agent.

Structure of Apatite Nanoparticles Derived from Marine Animal (Crab) Shells: An Environment-Friendly and Cost-Effective Novel Approach to Recycle Seafood Waste

In the present investigation, crab shells as seafood wastes were successfully recycled into an extremely useful biomaterial by the thermal treatment method. Thermogravimetric-differential thermal analysis studies concluded that the calcination temperature must be beyond ∼570 °C to get a fine and crystalline apatite powder from the crab shells. Thus, the calcination temperature is taken to be 700 °C. Powder X-ray diffraction analysis of the calcined crab shells revealed hydroxyapatite (HAp)/carbonated HAp (CHAp) with an average crystallite size of 24.4 nm. Scanning electron microscopy revealed the surface morphology of the crab shells-derived apatite powder as needle-like nanorods of HAp of diameter ≈ 100-300 nm and nanospheres of CHAp of diameter ≈ 100-500. Energy-dispersive X-ray spectroscopy showed the presence of calcium, phosphorous, magnesium, and oxygen as major elements in the apatite constituents. Fourier transform infrared as well as Raman spectroscopies confirmed the formation of apatite powder. X-ray photoelectron spectroscopy results indicated the electronic environment and oxidation states of the constituent elements, Ca, C, and P. On the basis of the results obtained from various characterization techniques, the overall study emphasized an environment-friendly and cost-effective approach for recycling of the bio-pollutant and synthesis of ultra-fine, ultra-crystalline apatite-based excellent biomaterial derived from crab shells as seafood wastes with its application as a futuristic biomaterial in bone/teeth implants.