Effect of preparation and processing conditions on UV absorbing properties of hydroxyapatite-Fe2O3 sunscreen

Optimization of an Ultrasound-Assisted Extraction Technique and the Effectiveness of the Sunscreen Components Isolated from Bletilla striata

Bletilla striata is the dried tuber of B. striata (Thund.) Reichb.f., which has antibacterial, anti-inflammatory, anti-tumor, antioxidant and wound healing effects. Traditionally, it has been used for hemostasis therapy, as well as to treat sores, swelling and chapped skin. In this study, we used the ultraviolet (UV) absorbance rate of B. striata extracts as the index, and the extraction was varied with respect to the solid-liquid ratio, ethanol concentration, ultrasonic time and temperature in order to optimize the extraction process for its sunscreen components. The main compounds in the sunscreen ingredients of Baiji (B. striata) were analyzed using ultra-high-performance liquid chromatography combined with quadrupole time-of-flight tandem mass spectrometry. The sunscreen properties were subsequently evaluated in vitro using the 3M tape method. The results show that the optimal extraction conditions for the sunscreen components of B. striata were a solid-liquid ratio of 1:40 (g/mL), an ethanol concentration of 50%, an ultrasonic time of 50 min and a temperature of 60 °C. A power of 100 W and an ultrasonic frequency of 40 Hz were used throughout the experiments. Under these optimized conditions, the UV absorption rate of the isolated sunscreen components in the UVB region reached 84.38%, and the RSD was 0.11%. Eighteen compounds were identified, including eleven 2-isobutyl malic acid glucose oxybenzyl esters, four phenanthrenes, two bibenzyl and one α-isobutylmalic acid. An evaluation of the sunscreen properties showed that the average UVB absorption values for the sunscreen samples from different batches of B. striata ranged from 0.727 to 1.201. The sunscreen ingredients of the extracts from B. striata had a good UV absorption capacity in the UVB area, and they were effective in their sunscreen effects under medium-intensity sunlight. Therefore, this study will be an experimental reference for the extraction of sunscreen ingredients from the B. striata plant, and it provides evidence for the future development of B. striata as a candidate cosmetic raw material with UVB protection properties.

Solid SiO2-Sealed Mesoporous Silica for Synergistically Combined Use of Inorganic and Organic Filters to Achieve Safe and Effective Skin Protection from All-Band UV Radiation

To effectively shield the full band of ultraviolet (UV) radiation and provide desirable protection, the combination of inorganic and organic filters was often used to protect human skin from the serious harm of UV exposure. However, the incompatibility of different filters and their mutual negative effect limit the production of multifilter sunscreen. In addition, the hazard of reactive oxygen species (ROS) produced by inorganic filters after UV exposure and the skin permeability of organic filters remain unresolved problems. In this study, titanium dioxide (TiO₂) and diethylamino hydroxybenzoyl hexyl benzoate (DHHB), two kinds of common filters with complementary UV shielding range, were first encapsulated into large mesoporous silica nanoparticles (MSN, ∼300 nm) to obtain MSN-TiO₂ and MSN-DHHB. Also, a SiO₂ coating was then made to seal and stabilize the MSN-TiO₂ and MSN-DHHB. The structure, UV screen function, and safety of the SiO₂-coated filters, MSN-TiO₂@SiO₂ and MSN-DHHB@SiO₂, were evaluated. The good mechanical stability exhibited by the solid SiO₂ layer prevented the release and skin penetration of the sealed DHHB and the photocatalysis of TiO₂. Furthermore, the combination of MSN-TiO₂@SiO₂ and MSN-DHHB@SiO₂ in sunscreen cream showed excellent UV shielding performance on covering the whole UV radiation range without mutual interference. Therefore, coating SiO₂ over MSN is a feasible strategy for entrapping various filters to improve their photostability, preventing skin penetration and ROS generation, and enhancing their compatibility with different sunscreen formulations.

Calcium phosphates from fish bones in sunscreen: An LCA and toxicity study of an emerging material for circular economy

The use of sustainable and natural materials is an ever-increasing trend in cosmetic. Natural calcium phosphate (CaP-N) from food by-products and especially from fisheries (i.e., bones), has been suggested as a sustainable option to chemicals commonly used in cosmetic products, in particular to UV-filters in sunscreens. However, the environmental benefits and impacts of its production and use are still uncertain as they have never been quantified. In this paper, we report on toxicological characterization of CaP-N produced from incineration of fish meal in a pilot scale plant. Furthermore, we quantified the environmental burdens linked to the partial substitution of UV-filters by CaP-N through the life cycle assessment (LCA) comparing CaP-N with zinc oxide nanoparticles (ZnO NPs) as alternative option. CaP-N consists in a biphasic mixture 53:47 of hydroxyapatite:β-tricalcium phosphate, and is made of round particles with a diameter in the range of a few microns. Toxicity tests on 4 aquatic species (Dunaliella tertiolecta, Tigriopus fulvus, Corophium insidiosum and Gammarus aequicauda) revealed that CaP-N does not produce any adverse effect, all the species showing EC/LC50 values higher than 100 mg L^-1. Moreover, during the 96 h acute toxicity test on C. insidiosum, which is a tube-building species, the specimens built their tubes with the available CaP-N, further attesting the non-toxicity of the material. The LCA study showed that the environmental performance of CaP-N is better than that of ZnO NPs for 11 out of 16 impact categories analysed in this study, especially for the categories Ecotoxicity and Eutrophication of freshwaters (an order of magnitude lower), and with the exception of fossil resources for which CaP-N has a significantly higher impact than ZnO NPs (+140 %). Concluding, our study demonstrates that the replacement of ZnO NPs with CaP-N thermally extracted from fish bones in cosmetic products can increase their safety and sustainability.

Potential Cosmetic Active Ingredients Derived from Marine By-Products

The market demand for marine-based cosmetics has shown a tremendous growth rate in the last decade. Marine resources represent a promising source of novel bioactive compounds for new cosmetic ingredient development. However, concern about sustainability also becomes an issue that should be considered in developing cosmetic ingredients. The fisheries industry (e.g., fishing, farming, and processing) generates large amounts of leftovers containing valuable substances, which are potent sources of cosmeceutical ingredients. Several bioactive substances could be extracted from the marine by-product that can be utilized as a potent ingredient to develop cosmetics products. Those bioactive substances (e.g., collagen from fish waste and chitin from crustacean waste) could be utilized as anti-photoaging, anti-wrinkle, skin barrier, and hair care products. From this perspective, this review aims to approach the potential active ingredients derived from marine by-products for cosmetics and discuss the possible activity of those active ingredients in promoting human beauty. In addition, this review also covers the prospect and challenge of using marine by-products toward the emerging concept of sustainable blue cosmetics.

Amorphous and crystalline cerium(IV) phosphates: biocompatible ROS-scavenging sunscreens

This paper reports on a comprehensive study of the UV-shielding properties (namely, the sun protection factor and the factor of protection against UV-A radiation) and cytotoxicity (including photocytotoxicity) of amorphous and crystalline cerium(IV) phosphates. It has been shown that cerium(IV) phosphate NH₄Ce₂(PO₄)₃ is characterised by UV-shielding properties that are comparable to those of nanocrystalline TiO₂ and CeO₂. Moreover, cerium(IV) phosphates did not show toxicity towards cell cultures of NCTC L929 line mouse fibroblasts and human mesenchymal stem cells, in a wide range of concentrations, and even enhanced the proliferative activity of the latter. In a model study of the photoprotective properties of cerium(IV) phosphates on human mesenchymal stem cells, the pronounced protective effect of NH₄Ce₂(PO₄)₃ was observed, which was comparable to the shielding action of nanocrystalline CeO₂. The results have shown that tetravalent cerium phosphates can be considered as promising UV-filters for sunscreen applications.

The Use of Calcium Phosphates in Cosmetics, State of the Art and Future Perspectives

Calcium phosphates (CaPs) belong to a class of biomimetic materials widely employed for medical applications thanks to their excellent properties, such as biodegradability, biocompatibility and osteoinductivity. The recent trend in the cosmetics field of substituting potentially hazardous materials with natural, safe, and sustainable ingredients for the health of consumers and for the environment, as well as the progress in the materials science of academics and chemical industries, has opened new perspectives in the use of CaPs in this field. While several reviews have been focused on the applications of CaP-based materials in medicine, this is the first attempt to catalogue the properties and use of CaPs in cosmetics. In this review a brief introduction on the chemical and physical characteristics of the main CaP phases is given, followed by an up-to-date report of their use in cosmetics through a large literature survey of research papers and patents. The application of CaPs as agents in oral care, skin care, hair care, and odor control has been selected and extensively discussed, highlighting the correlation between the chemical, physical and toxicological properties of the materials with their final applications. Finally, perspectives on the main challenges that should be addressed by the scientific community and cosmetics companies to widen the application of CaPs in cosmetics are given.

Functionalized Porous Hydroxyapatite Scaffolds for Tissue Engineering Applications: A Focused Review

Biomaterials have been widely used in tissue engineering applications at an increasing rate in recent years. The increased clinical demand for safe scaffolds, as well as the diversity and availability of biomaterials, has sparked rapid interest in fabricating diverse scaffolds to make significant progress in tissue engineering. Hydroxyapatite (HAP) has drawn substantial attention in recent years owing to its excellent physical, chemical, and biological properties and facile adaptable surface functionalization with other innumerable essential materials. This focused review spotlights a brief introduction on HAP, scope, a historical outline, basic structural features/properties, various synthetic strategies, and their scientific applications concentrating on functionalized HAP in the diverse area of tissue engineering fields such as bone, skin, periodontal, bone tissue fixation, cartilage, blood vessel, liver, tendon/ligament, and corneal are emphasized. Besides clinical translation aspects, the future challenges and prospects of HAP based biomaterials involved in tissue engineering are also discussed. Furthermore, it is expected that researchers may find this review expedient in gaining an overall understanding of the latest advancement of HAP based biomaterials.

Research progress on applications of calcium derived from marine organisms

Calcium is an important mineral that plays an integral role in human health, especially bone health. Marine biological calcium is an abundant resource that is generally accepted and has a complex active structure. This review evaluates research progress on marine biological calcium with regards to its sources, use of calcium supplements, calcium bioavailability, and novel applications of marine calcium. The potential for future development and the use of products incorporating marine biological calcium in biomedical research and the pharmaceutical, health care, and food industries are also reviewed. The goal of this review is to provide a comprehensive documentation on resource utilization and product development from marine organisms.

A short review of alternative ingredients and technologies of inorganic UV filters

BACKGROUND

The growing need to use sunscreens is a concrete reality, and it is associated with the increase in the population's awareness of the ultraviolet (UV) radiation damage. Inorganic UV filters promote the formation of particles/pigments film over the skin surface, reflecting, dispersing, and absorbing the radiation. Investigations of this class of filters demonstrate the emergence of alternative ingredients and new technologies.

AIMS AND METHODS

In this review, we presented potential candidates for alternative UV inorganic filters, such as hydroxyapatite, cerium dioxide, and hydrotalcite.

RESULTS

Specialized literature identified hydroxyapatite and cerium dioxide as actives with good performances, with a broad spectrum of absorption against UV radiation. Both of them were considered safe against degradation and skin erythema formation. Inorganic compounds as an alternative to circumvent degradation problems of organic UV filters containing PABA were also analyzed, with hydrotalcite having a good performance in improving the performance of classic ingredients, bypassing photoinstability, and improving safety, in addition to preventing skin irritability.

CONCLUSION

Further investigations of these ingredients and interactions with sunscreen formulations are necessary to overall explore their safety and efficacy, encouraging future researches for more inorganic UV filters.

Films of chitosan and natural modified hydroxyapatite as effective UV-protecting, biocompatible and antibacterial wound dressings

Chitosan is a natural polysaccharide widely used in biomedicine, for instance for wound dressing. Hydroxyapatite is a very bioactive calcium phosphate which, if modified with an appropriate element (iron Fe), can also have UV-absorbing properties. In this work, we report the study of films of chitosan incorporated with iron-modified hydroxyapatite of natural origin (from cod fish bones); this combination led to an innovative chitosan-based material with excellent and advanced functional properties. The films showed very high UV absorption (Ultraviolet Protection Factor (UPF) value higher than 50). This is the first time that a chitosan-based material has shown such high UV protection properties. The films also showed to be non-cytotoxic, and possessed antimicrobial activity towards both Gram-positive and negative strains. Their mechanical properties, optimised with an experimental design approach, confirmed their potential use as multifunctional wound dressing, capable of reducing bacterial infections and, at the same time, protecting from UV light.

Hydroxyapatite and Titanium Dioxide Nanoparticles: Radiolabelling and In Vitro Stability of Prospective Theranostic Nanocarriers for 223Ra and 99mTc

Hydroxyapatite and titanium dioxide are widely used materials in a broad spectrum of branches. Due to their appropriate properties such as a large specific surface area, radiation stability or relatively low toxicity, they could be potentially used as nanocarriers for medicinal radionuclides for diagnostics and therapy. Two radiolabelling strategies of both nanomaterials were carried out by 99mTc for diagnostic purposes and by 223Ra for therapeutic purposes. The first one was the radionuclide sorption on ready-made nanoparticles and the second one was direct radionuclide incorporation into the structure of the nanoparticles. Achieved labelling yields were higher than 94% in all cases. Afterwards, in vitro stability tests were carried out in several solutions: physiological saline, bovine blood plasma, bovine blood serum, 1% and 5% human albumin solutions. In vitro stability studies were performed as short-term (59 h for 223Ra and 31 h for 99mTc) and long-term experiments (five half-lives of 223Ra, approx. 55 days). Both radiolabelled nanoparticles with 99mTc have shown similar released activities (about 20%) in all solutions. The best results were obtained for 223Ra radiolabelled titanium dioxide nanoparticles, where overall released activities were under 6% for 59 h study in all matrices and under 3% for 55 days in a long-term perspective.

Comparative study of gelatin cryogels reinforced with hydroxyapatites with different morphologies and interfacial bonding

Gelatin cryogels are good candidate scaffolds for tissue engineering because of their interconnected macroporous structure. For bone regeneration, inorganic components are chosen to reinforce gelatin cryogels: (i) to mimic the compositions of natural bone tissue and (ii) to meet the mechanical requirements of bone repairing. Cryogels were prepared from methacrylated gelatin (GelMA) in this study, and hydroxyapatite nanorods (HANRs) with surface-grafted acrylate groups (D-HANRs) were synthesized to reinforce the cryogels, in which, the crosslinking between GelMA and D-HANRs was expected. In parallel, HANRs and hydroxyapatite nanowires (HANWs) were also composited with the GelMA cryogels to investigate the effects of filler morphology and interfacial bonding on the overall properties of the resulting composite cryogels comparatively. All these composite cryogels demonstrated potential as bone repairing materials by displaying excellent performances such as high porosity, appropriate water retention, shape recovery, and fast resilience features, as well as good biocompatibility and cell affinity. In comparison with the HANR composited GelMA cryogel, the HANWs were able to ameliorate the compression and the rheology performances of the resulting composite cryogels more efficiently due to the fact that the one-dimensional HANWs played a bridging role in the gelatin matrix. Among all the preparations, however, it was the D-HANRs that achieved the strongest reinforcement efficiency in mechanical properties because the double bonds on their surface could be photo-crosslinked with GelMA to form interfacial bonding. With these findings, we concluded that it was preferable for inorganic fillers designed for cryogel-type bone repairing materials to be in a one-dimensional morphology with surface functional groups to strengthen their interfacial bonding with the polymeric matrix.

A New Approach to UV Protection by Direct Surface Functionalization of TiO2 with the Antioxidant Polyphenol Dihydroxyphenyl Benzimidazole Carboxylic Acid

Skin cancer is the most common malignant cancer with an incidence of 1 million cases/year. It is well known that exposure to UV radiation from sunlight leads the most frequent risk factors for several skin disorders including skin cancer. Sunscreen filters represent a valid protection against dangerous effects derived from UV radiation, and they can be divided in organic and inorganic UV filters. Adding, at the product formulation, molecules with booster effect, or also substances that can increase the protecting effectiveness via synergic mechanisms, can further enhance their protection activity. Moreover, this approach leads to develop formulations with high SPF (Sun Protection Factor) with a reduced content of UV filters, this is in line with the recent decisions of yet a few countries (Palau, Thailand, Philippines, and Hawaii) to ban some sunscreen filters to preserve marine environments (i.e., reef). In this work, a new class of sunscreen UV filters has been synthesized, by means the combination of physical filter and Oxisol, an antioxidant molecule with booster effect. In this study, the synthesis of new physical multifunctional ingredients is reported, by means the direct surface functionalization of inorganic filters (in particular TiO₂) with Oxisol. In this study, the full characterization of these multifunctional ingredients is also reported, in addition to the cytotoxicity tests, the photocatalytic activity and the rheological properties involved on skin application.

UV-shielding alginate films crosslinked with Fe3+ containing EDTA

In this study, we fabricated a soft, transparent UV-shielding film (Alg-Fe³⁺-EDTA) by crosslinking sodium alginate with a ferric ion solution containing EDTA. The obtained films were characterized via SEM, ATR-FTIR, XRD, TG and DTG; the results indicated that the synergistic gelation of ferric alginate and alginic acid existed in Alg-Fe³⁺-EDTA film. The Alg-Fe³⁺-EDTA film performance to be optimized under the following conditions: 1.6% Fe³⁺, 0.8% EDTA, and crosslinking duration of 12 min. The Alg-Fe³⁺-EDTA film had high visible light transmittance, the UV-C (200-280 nm) and UV-B (280-315 nm) shielding rates were 100%, and the UV-A (315-400 nm) shielding rate was 98.37%; the UPF reached 50+; additionally, the tensile strength and elongation-at-break were 56.85 MPa and 10.45%, respectively, and still have ultraviolet shielding effect under water environments or after strong light irradiation. This work provides an efficient method to improve the optical and mechanical ability of ferric alginate films.

Ultrafast sonochemistry-based approach to coat TiO2 commercial particles for sunscreen formulation

TiO₂ is a common inorganic filter used in sunscreens due to its photoprotective effect on the skin against UV radiation. However, the use of this kind of material in cosmetics is limited by its inherent photocatalytic activity. It is known that coating on TiO₂ surface can improve some features. Although, many of the methodologies used for this purpose are still laborious and time-consuming. Thus, this work reports a novel, easy, cheap and fast strategy to coat TiO₂ particles by using a sonochemistry approach, aiming to decrease photocatalytic activity and to enhance colloidal stability. For this proposal, SiO₂, Al₂O₃, ZrO₂ and sodium polyacrylate (PAANa) were used to tune the surface of commercial TiO₂ particles and they were applied in a sunscreen formulation. The samples were characterized by XRPD, FT-IR, DLS, EDS, SEM and TEM. The photocatalytic activity and UV-shielding ability were also evaluated. The sunscreen formulations were prepared and characterized by zeta potential, DLS, and Sun Protection Factor (SPF). FT-IR, EDS, and charge surface of the particles confirmed the success of the sonochemistry coating. Additionally, TiO₂@Al₂O₃, TiO₂@SiO₂ and TiO₂@PAANa show a lower photocatalytic activity than original TiO₂ with similar UV-shielding ability. The sunscreens produced with the coated TiO₂ have similar SPF to the one with commercial TiO₂. Specifically, the sunscreen with TiO₂@PAANa shows an increase in colloidal stability. Herein, the incorporation of the sonochemical-coated TiO₂ particles in sunscreen formulations may produce sunscreens with better aesthetic appearance and a greater health security due to its lower free radicals production.

Natural calcium phosphates from fish bones and their potential biomedical applications

The treatment and recovery of bio-wastes have raised considerable attention both from the environmental and economic point of view. Every year, a remarkable amount of fish processing by-products are generated and dumped as waste from all over the world. Fish bones can serve as a raw material for the production of high value-added compounds that can be used in various sectors including agrochemical, biomedical, food and pharmaceutical industries. The calcination of fish bones results in a single phase (hydroxyapatite) or bi-phasic (hydroxyapatite-tricalcium phosphate) bioceramics depending on the processing conditions as well as the content of the fish bones. This review summarizes the literature on the production of hydroxyapatite from fish bones and discusses their potential applications in biomedical field. The effect of processing conditions on the properties of final products including Ca/P ratio, crystal structure, particle shape, particle size and biological properties are presented in the light of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric-differential thermal analysis, bioactivity and biocompatibility investigations.