Design of Salecan-containing semi-IPN hydrogel for amoxicillin delivery

A Rapid Self-Assembling Peptide Hydrogel for Delivery of TFF3 to Promote Gastric Mucosal Injury Repair

Self-assembled peptide-based nanobiomaterials exhibit promising prospects for drug delivery applications owing to their commendable biocompatibility and biodegradability, facile tissue uptake and utilization, and minimal or negligible unexpected toxicity. TFF3 is an active peptide autonomously secreted by gastric mucosal cells, possessing multiple biological functions. It acts on the surface of the gastric mucosa, facilitating the repair process of gastric mucosal damage. However, when used as a drug, TFF3 faces significant challenges, including short retention time in the gastric mucosal cavity and deactivation due to degradation by stomach acid. In response to this challenge, we developed a self-assembled short peptide hydrogel, Rqdl10, designed as a delivery vehicle for TFF3. Our investigation encompasses an assessment of its properties, biocompatibility, controlled release of TFF3, and the mechanism underlying the promotion of gastric mucosal injury repair. Congo red/aniline blue staining revealed that Rqdl10 promptly self-assembled in PBS, forming hydrogels. Circular dichroism spectra indicated the presence of a stable β-sheet secondary structure in the Rqdl10 hydrogel. Cryo-scanning electron microscopy and atomic force microscopy observations demonstrated that the Rqdl10 formed vesicle-like structures in the PBS, which were interconnected to construct a three-dimensional nanostructure. Moreover, the Rqdl10 hydrogel exhibited outstanding biocompatibility and could sustainably and slowly release TFF3. The utilization of the Rqdl10 hydrogel as a carrier for TFF3 substantially augmented its proliferative and migratory capabilities, while concurrently bolstering its anti-inflammatory and anti-apoptotic attributes following gastric mucosal injury. Our findings underscore the immense potential of the self-assembled peptide hydrogel Rqdl10 for biomedical applications, promising significant contributions to healthcare science.

Polysaccharide mediated nanodrug delivery: A review

Polysaccharides have drawn a lot of attention due to their potential as carriers for drugs and other bioactive chemicals. In drug delivery systems, natural macromolecules such as polysaccharides are widely utilized as polymers. This utilization extends to various polysaccharides employed in the development of nanoparticles for medicinal administration, with the goal of enhancing therapeutic efficacy while minimizing side effects. This study not only offers an overview of the existing challenges faced by these materials but also provides detailed information on key polysaccharides expertly engineered into nanoparticles. Noteworthy examples include Bael Fruit Gum, Guar Gum, Pectin, Agar, Cellulose, Alginate, Chitin, and Gum Acacia, each selected for their distinctive properties and strategically integrated into nanoparticles. The exploration of these natural macromolecules illuminates their diverse applications and underscores their potential as effective carriers in drug delivery systems. By delving into the unique attributes of each polysaccharide, this review aims to contribute valuable insights to the ongoing advancements in nanomedicine and pharmaceutical technologies. The overarching objective of this review research is to assess the utilization and comprehension of polysaccharides in nanoapplications, further striving to promote their continued integration in contemporary therapeutics and industrial practices.

Construction and properties of a carbon dots-decorated gelatin-dialdehyde starch hydrogel with pH response release and antibacterial activity

An antibacterial carbon dot hydrogel (GDSS-PCD) was constructed based on gelatin, dialdehyde starch (DS) and carbon dots (S-PCDs). The formation mechanism of GDSS-PCD hydrogels was attributed to the synergistic cross-linking of hydrogen bonds and dynamic covalent bonds. With increasing S-PCD content, the mechanical and rheological properties of GDSS-PCD hydrogels can be improved, and the micropore size becomes denser. GDSS-PCD hydrogels had pH-dependent swelling and degradation behavior, with a high swelling rate under acidic conditions and relatively low swelling under neutral and alkaline conditions. The cumulative release of S-PCDs from the same hydrogel in an acidic environment was higher than that in an alkaline environment, indicating that the GDSS-PCD hydrogel had a pH-dependent controlled release ability. The release behavior of S-PCDs conformed to the first-order kinetic release model (R2 > 0.95), and the release mechanism was related to Fickian diffusion. The synergistic antibacterial mechanism of GDSS-PCD hydrogels against Staphylococcus aureus suggested that bacterial metabolism leads to an acidic culture environment, which releases S-PCDs and destroys the bacterial cell membrane for antibacterial purposes. In GDSS-PCD hydrogels, S-PCDs play the main antibacterial role, and the hydrogel plays a synergistic role in trapping bacteria. Carbon dot hydrogels are promising materials to fulfil the functions of antibacterial and controlled release in the food and biomedical fields.

Hyaluronic acid/alginate-based biomimetic hydrogel membranes for accelerated diabetic wound repair

The study aims to develop a new multifunctional biopolymer-based hydrogel membrane dressing by adopting a solvent casting method for the controlled release of cefotaxime sodium at the wound site. Sodium alginate enhances collagen production in the skin, which provides tensile strength to healing tissue. Moreover, the significance of extracellular molecules such as hyaluronic acid in the wound the healing cascade renders these biopolymers an essential ingredient for the fabrication of hydrogel membranes via physical crosslinking (hydrogen bonding). These membranes were further investigated in terms of their structure, and surface morphology, as well as cell viability analysis. A membrane with the most suitable characteristics was chosen as a candidate for cefotaxime sodium loading and in vivo analysis. Results show that the 3D porous nature of developed membranes allows optimum water vapor and oxygen transmission (>8.21 mg/mL) to divert excessive wound exudate away from the diabetic wound bed, MTT assay confirmed cell viability at more than 80%. In vivo results confirmed that the CTX-HA-Alg-PVA hydrogel group showed rapid wound healing with accelerated re-epithelization and a decreased inflammatory response. Conclusively, these findings indicate that CTX-HA-Alg-PVA hydrogel membranes exhibit a suitable niche for use as dressing membranes for healing of diabetic wounds.

β-Cyclodextrin/chitosan-based (polyvinyl alcohol-co-acrylic acid) interpenetrating hydrogels for oral drug delivery

Gallic acid is an important phenolic compound with extensive applications in the food and pharmaceutical industries due to its health-promoting properties. However, due to its poor solubility and bioavailability, it is rapidly excreted from the body. Therefore, β-cyclodextrin/chitosan-based (polyvinyl alcohol-co-acrylic acid) interpenetrating controlled release hydrogels were developed to improve its dissolution and bioavailability. pH, polymer ratios, dynamic and equilibrium swelling, porosity, sol-gel, FTIR, XRD, TGA, DSC, SEM and structural parameters like an average molecular weight between crosslinks, solvent interaction parameters, and diffusion coefficient affecting release behavior were investigated. The highest swelling and release were observed at pH 7.4. Furthermore, hydrogels showed good antioxidant and antibacterial properties. Hydrogels improved the bioavailability of gallic acid in a pharmacokinetics study in rabbits. In vitro biodegradation showed that hydrogels were more stable in blank PBS than lysozyme and collagenase. Hydrogels were safe for rabbits (3500 mg/kg) without causing hematological or histopathological changes. The hydrogels showed good biocompatibility, and no adverse reactions were observed. Moreover, the developed hydrogels can be used to improve the bioavailability of various other drugs.

Environmentally friendly strategy to access self-healable, reprocessable and recyclable chitin, chitosan, and sodium alginate based polysaccharide-vitrimer hybrid materials

Natural polysaccharides show enviable advantages for preparation of sustainable hybrid materials. However, in most cases, complex chemical modifications of natural polysaccharides are required, which not only causes changes of the inherent properties of polysaccharides, but also increases the manufacturing costs of the final materials. Therefore, it is highly desired to develop efficient and low-cost ways to access polysaccharides-containing hybrid materials. In this work, we report the environmentally friendly preparation of a new kind of polysaccharide-based materials, called polysaccharide-vitrimer hybrid materials, for the first time. The vitrimer synthesis and hybridization with polysaccharides can be achieved via a convenient one-pot method in absence of solvent and catalyst. In addition, time-consuming and labor-intensive physical/chemical modifications of natural polysaccharides are completely avoided. The resultant hybrid materials show good mechanical performance (tensile toughness is up to 13.7 MJ/m³), high thermal stability (T_d,max is up to 457 °C), fast self-healing ability (self-healing efficiency is up to 99 % within 20s at 80 °C) and excellent reprocessability and recyclability (at least three cycles). Especially, conductive polysaccharide-vitrimer hybrid materials could be readily prepared from the resultant materials, exhibiting novel applications as flexible sensors and electromagnetic shielding materials (the EMI SE is up to 24.93 dB).

A pH responsive and superporous biocomposite hydrogel of Salvia spinosa polysaccharide-co-methacrylic acid for intelligent drug delivery

Herein, a drug delivery system (SSH-co-MAA) based on the mucilage from seeds of Salvia spinosa (SSH; polymer) and methacrylic acid (MAA; monomer) is introduced for the controlled delivery of venlafaxine HCl using a sustainable chemical approach. The optimized conditions for the designing of the ideal formulation (M4) of SSH-co-MAA were found to be 2.5% (w/w) of SSH, 30.0% (w/w) of MAA, 0.4% (w/w) of both N,N'-methylene-bis-acrylamide (MBA; cross-linker) and potassium persulfate (KPS; initiator). The structure characterization of SSH-co-MAA by Fourier transform infrared and solid-state CP/MAS ¹³C-NMR spectroscopy has confirmed the grafting of MAA onto SSH. The thermogravimetric analysis revealed that SSH-co-MAA is a stable entity before and after loading of the venlafaxine HCl-loaded SSH-co-MAA (VSSH-co-MAA). Scanning electron microscopy images of SSH-co-MAA after swelling then freeze drying showed the superporous nature of the hydrogel. The gel fraction (%) of SSH-co-MAA depended upon concentration of SSH, MAA, and MBA. The porosity (%) was increased with the increase in the concentration of SSH and decreased with the decrease in the concentration of MAA and MBA. The swelling indices, venlafaxine HCl loading, and release (24 h at the pH of the gastrointestinal tract) from VSSH-co-MAA were found to be dependent on the pH of the swelling media and the concentration of SSH, MAA, and MBA. The release of venlafaxine HCl followed non-Fickian diffusion mechanism. Conclusively, SSH-co-MAA is a novel material for potential application in targeted drug delivery applications.

Novel Green Crosslinked Salecan Hydrogels and Preliminary Investigation of Their Use in 3D Printing

Salecan, a kind of polysaccharide, is produced by the Agrobacterium ZX09 salt tolerant strain. In this study, green crosslinked citric acid-salecan hydrogels are explored as novel materials with a high potential for use in regenerative medicine. The impact of salecan and citric acid on the final crosslinked hydrogels was intensively studied and estimated in terms of the whole physicochemical properties and antimicrobial activity. FTIR spectra demonstrated the successful green crosslinking of salecan through its esterification with citric acid where the formation of strong covalent bonds collaboratively helped to stabilize the entire hydrogel systems in a wet state. Hydrogels presented a microporous morphology, good swelling capacity, pH responsiveness, great mechanical stability under stress conditions and good antibacterial activity, all related to the concentration of the biopolymers used in the synthesis step. Additionally, salecan hydrogels were preliminary investigated as printing inks. Thanks to their excellent rheological behavior, we optimized the citrate-salecan hydrogel inks and printing parameters to render 3D constructs with great printing fidelity and integrity. The novel synthesized salecan green crosslinked hydrogels enriches the family of salecan-derived hydrogels. Moreover, this work not only expands the application of salecan hydrogels in various fields, but also provides a new potential option of designing salecan-based 3D printed scaffolds for customized regenerative medicine.

Novel Nanocomposite Hydrogels Based on Crosslinked Microbial Polysaccharide as Potential Bioactive Wound Dressings

A multitude of dressings have been developed to promote wound repair, such as membranes, foams, hydrocolloids and hydrogels. In this study, a crosslinked polysaccharide hydrogel was mixed with a bioactive ingredient to synthesize a novel nanocomposite material to be used in wound healing. Variation of the ratio between hydrogel components was followed and its effect was analyzed in regard to swelling, degradation rate and thermo-mechanical behavior. The resulting crosslinked structures were characterized by FTIR and microscopy analyses. The antimicrobial activity of the crosslinked hydrogels loaded with bioactive agent was evaluated using two bacterial strains (Gram-positive Staphylococcus aureus and Gram-negative bacteria Escherichia Coli). All the results showed that the new synthesized biopolymer nanocomposites have adequate properties to be used as antibacterial wound dressings.

Effects of the Amylose/Amylopectin Content and Storage Conditions on Corn Starch Hydrogels Produced by High-Pressure Processing (HPP)

In this study, the effects of the amylose/amylopectin content on starch gelation and the physical characteristics of hydrogels produced by HPP were studied by optical and rheological measurements in steady-state conditions. Additionally, the effects of the storage temperature (4 °C and 20 °C) and type of packaging (plastic bags or sealed Petri dishes) on the physical stability of the hydrogels were evaluated for 30 days of storage by evaluating the shrinkage of the granules, as well as the weight loss, water activity, organoleptic, and rheological properties. The experimental findings suggested that amylose plays an antagonistic role in determining the capacity of the starch granules to absorb water under pressure and to create stable and structured gels and on the physical stability of hydrogels due to its influence over the starch retrogradation extent during storage. Twenty per cent amylose was the minimum concentration to form stable corn starch HPP hydrogels with good physical and rheological properties. Moreover, a storage temperature of 20 °C and the use of polymeric bags were evaluated as the most suitable storage conditions and packaging materials enabling the long storage of corn starch hydrogels.

Ionically cross-linked alginate-chitosan core-shell hydrogel beads for oral delivery of insulin

Here, core-shell hydrogel beads for oral insulin delivery at intestine was reported, which was a target site for insulin absorption. The core-shell hydrogel beads were prepared using naturally derived alginate and chitosan polysaccharides by simple dropping technique. In order to effectively control leakage of insulin from core-shell hydrogel beads, insulin was embedded into the layered double hydroxides (LDHs). LDH/insulin-loaded complexes were firstly coated with chitosan, and then coated with alginate to generate core-shell hydrogel beads. The biocompatibility and angiogenic response of core-shell hydrogel beads were evaluated by direct contact of the beads with chick embryo chorioallantoic membrane, which indicates safety of the core-shell beads. The beads successfully retained the insulin within the core-shell structure at pH 1.2, indicating that insulin had a good protective effect in harsh acidic environments. Interestingly, insulin release starts at the simulated intestinal fluid (pH 6.8) and continue to release for 24 h in a sustained manner.

Bioactive and multifunctional keratin-pullulan based hydrogel membranes facilitate re-epithelization in diabetic model

Hydrogel membrane dressings with multifunctional tunable properties encompassing biocompatibility, anti-bacterial, oxygen permeability, and adequate mechanical strength are highly preferred for wound healing. The present study aimed to develop biopolymer-based hydrogel membranes for the controlled release of therapeutic agent at the wound site. Toward this end we developed Cefotaxime sodium (CTX) loaded keratin (KR)-pullulan (PL) based hydrogel membrane dressings. All membranes show optimized vapor transmission rate (≥1000 g/ m²/day), oxygen permeability >8.2 mg/mL, MTT confirmed good biocompatibility and sufficient tensile strength (17.53 ± 1.9) for being used as a wound dressing. Nonetheless, KR-PL-PVA membranes show controlled CTX release due to enriched hydrophilic moieties which protect the wound from getting infected. In vivo results depict that CTX-KR-PL-PVA membrane group shows a rapid wound closure rate (p < 0.05) with appreciable angiogenesis, accelerated re-epithelization, and excessive collagen deposition at the wound site. These results endorsed that CTX-KR-PL-PVA hydrogel membranes are potential candidates for being used as dressing material in the diabetic wound.

Evaluation of the Physical Stability of Starch-Based Hydrogels Produced by High-Pressure Processing (HPP)

Starch-based hydrogels are natural polymeric structures with high potential interest for food, cosmeceutical, and pharmaceutical applications. In this study, the physical stability of starch-based hydrogels produced via high-pressure processing (HPP) was evaluated using conventional and accelerated methods. For this purpose, conventional stability measurements, namely swelling power, water activity, texture, and organoleptic properties, as well as microbiological analysis of rice, corn, wheat, and tapioca starch hydrogels, were determined at different time intervals during storage at 20 °C. Additionally, to assess the stability of these structures, accelerated tests based on temperature sweep tests and oscillatory rheological measurements, as well as temperature cycling tests, were performed. The experimental results demonstrated that the physical stability of starch-based HPP hydrogels was interdependently affected by the microorganisms’ action and starch retrogradation, leading to both organoleptic and texture modifications with marked reductions in swelling stability and firmness. It was concluded that tapioca starch hydrogels showed the lowest stability upon storage due to higher incidence of microbial spoilage. Accelerated tests allowed the good stability of HPP hydrogels to be predicted, evidencing good network strength and the ability to withstand temperature changes. Modifications of the rheological properties of corn, rice, and wheat hydrogels were only observed above 39 °C and at stress values 3 to 10 times higher than those necessary to modify commercial hydrogels. Moreover, structural changes to hydrogels after cycling tests were similar to those observed after 90 days of conventional storage. Data obtained in this work can be utilized to design specific storage conditions and product improvements. Moreover, the accelerated methods used in this study provided useful information, allowing the physical stability of starch-based hydrogels to be predicted.

Self-crosslinked chitosan/κ-carrageenan-based biomimetic membranes to combat diabetic burn wound infections

Diabetic wound infection often leads to compromised healing with frequent chances of sepsis, amputation and even death. Traditional patient care emphasized on early debridement and fluid resuscitation followed by intravenous antibiotics therapy. However, compromised vasculature often limit the systemic effect of antibiotics. Current study focused formulation of chitosan HCl, κ- carrageenan and PVA based physical cross-linked hydrogel membrane dressings loaded with cefotaxime sodium (CTX), for potential diabetic burn wound healing by adopting solvent casting method. Results of mechanical strength shows tensile strength and % elongation of 12.63 ± 0.25 and 48 ±3.05 respectively. Water vapor transmission rate (WVTR) depicts that despite of formulation KCP3 and KCP6, all hydrogel membranes have WVTR value in range of ideal dressing i.e., 2000-2500 g/m2/day. Whereas, all hydrogel membranes have oxygen permibility values more than 8.2 mg/ml. Bacterial penetration analysis confirms the barrier property of formulated membranes. Drug loaded hydrogel membrane showed control release up to 24 hr which provide protection against bacterial proliferation. Present study aims to constructs diabetic burn rat model which demonstrate that CTX loaded hydrogel membrane shown significantly rapid wound closure higher re-epithelization and numerous granulation tissue formation as compared to positive and negative control group. Conclusively, it is confirmed that formulated hydrogel membranes are beneficial and can be considered as a promising membrane dressing to treat diabetic burn wound.

Injectable, Self-Healing, and Biocompatible N,O-Carboxymethyl Chitosan/Multialdehyde Guar Gum Hydrogels for Sustained Anticancer Drug Delivery

Local delivery of anticancer agents via injectable hydrogels could be a promising method for achieving spatiotemporal control on drug release as well as minimizing the disadvantages related to the systemic mode of drug delivery. Keeping this in mind, we report the development of N,O-carboxymethyl chitosan (N,O-CMCS)-guar gum-based injectable hydrogels for the sustained delivery of anticancer drugs. The hydrogels were synthesized by chemical crosslinking of multialdehyde guar gum (MAGG) and N,O-CMCS through dynamic Schiff base linkages, without requiring any external crosslinker. Fabrication of injectable hydrogels, involving N,O-CMCS and MAGG via Schiff base crosslinking, is being reported for the first time. The hydrogels exhibited pH-responsive swelling behavior and good mechanical properties with a storage modulus of about 1625 Pa. Due to the reversible nature of Schiff base linkages, hydrogels displayed excellent self-healing and thixotropic properties. Doxorubicin (Dox), an anticancer agent, was loaded onto these hydrogels and its release studies were conducted at pH 7.4 (physiological) and pH 5.5 (tumoral). A sustained release of about 67.06% Dox was observed from the hydrogel after 5 days at pH 5.5 and about 32.13% at pH 7.4. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay on the human embryonic kidney cell line (HEK-293) and the hemolytic assay demonstrated the biocompatible nature of the hydrogels. The Dox-loaded hydrogel exhibited a significant killing effect against breast cancer cells (MCF-7) with a cytotoxicity of about 72.13%. All the data presented support the efficiency of the synthesized N,O-CMCS/MAGG hydrogel as a biomaterial that may find promising applications in anticancer drug delivery.

Amphiphilic self-assembly peptides: Rational strategies to design and delivery for drugs in biomedical applications

Amphiphilic self-assembling peptides are widely used in tissue and cell engineering, antimicrobials, drug-delivery systems and other biomedical fields due to their good biocompatibility, functionality, flexibility of design and synthesis, and tremendous potential as delivery carriers for drugs. Currently, the design and study of amphipathic peptides by a bottom-up method to develop new biomedical materials have become a hot topic. However, defined rules have not been established for the design and development of self-assembled peptides. Therefore, the focus of this review is to summarize and provide several rational strategies for the design and study of amphiphilic self-assembly peptides. In addition, this paper also describes the types and general self-assembling mechanism of amphipathic peptides, and outlines their applications in the delivery of hydrophobic drugs, nucleic acid drugs, peptide drugs and vaccines. Amphiphilic self-assembled peptides are expected to exploit new functional materials for drug delivery and other applications.

Construction of Porous Starch-Based Hydrogel via Regulating the Ratio of Amylopectin/Amylose for Enhanced Water-Retention

The performance of hydrogels prepared with traditional natural starch as raw materials is considerable; the fixed ratio of amylose/amylopectin significantly limits the improvement of hydrogel structure and performance. In this paper, starch hydrogels were prepared by physical blending and chemical grafting, with the aid of ultrasonic heating. The effects of different amylose/amylopectin ratios on the microstructure and water retention properties of starch hydrogels were studied. The results show that an increase in amylopectin content is beneficial to improve the grafting ratio of acrylamide (AM). The interaction between the AM grafted on amylopectin and amylose molecules through hydrogen bonding increases the pores of the gel network and thins the pore walls. When the amylopectin content was 70%, the water absorption (swelling 45.25 times) and water retention performance (16 days water retention rate 44.17%) were optimal. This study provides new insights into the preparation of starch-based hydrogels with excellent physical and chemical properties.

Polymeric antibiofilm coating comprising synergistic combination of citral and thymol prevents methicillin-resistant Staphylococcus aureus biofilm formation on titanium

Biomaterial associated microbial infections are complicated and mostly lead to revision surgery or removal which are painful to the patients and quite expensive. These infections are difficult to treat with antibiotics as it is often related to biofilm formation. Methicillin resistant Staphylococcus aureus (MRSA) is the leading pathogen in biomaterial associated infections and well known to form biofilm on foreign materials. To reduce the risk of biomaterial associated infections, recent treatment strategies focus on modification of the implant surface to prevent the adhesion of bacteria. Antibiofilm coating is the effective approach than coating with antimicrobials as antibiofilm agents will not create selective pressure thereby excludes possibility of drug resistance. The current study identified and validated the synergistic antibiofilm activity of citral (CIT) and thymol (THY) by crystal violet quantification and microscopic analysis without alteration in growth and metabolic viability of MRSA. Polymeric antibiofilm coating with CIT + THY as active ingredients was formulated and coated on titanium surface by the process of spin coating. Fourier-transform infrared spectroscopy (FTIR) analysis confirmed the effective blending of polymeric formulation and the presence of CIT and THY. Atomic force microscopy (AFM) images revealed the homogenous coating and reduced surface roughness and thickness of the coating was measured by surface profilometer. Antibiofilm coating released CIT and THY in a sustained manner for 60 days. Antibiofilm coating effectively inhibited MRSA adherence in vitro and antibiofilm activity of coating was not affected by plasma conditioning. In addition, antibiofilm coating was non-hemolytic and non-toxic to PBMC. Thus, the current study demonstrated the effectual strategy to prevent biomaterial associated infections and proposes the prospective role of antibiofilm coating in clinical applications.

Biocompatible Hydrogels Based on Food Gums with Tunable Physicochemical Properties as Scaffolds for Cell Culture

Hydrogels composed of food gums have gained attention for future biomedical applications, such as targeted delivery and tissue engineering. For their translation to clinical utilization, reliable biocompatibility, sufficient mechanical performance, and tunable structure of polysaccharide hydrogels are required aspects. In this work, we report a unique hybrid polysaccharide hydrogel composed of salecan and curdlan, in which the former is a thickening agent and the latter serves as a network matrix. The physicochemical properties, such as mechanical strength, thermal stability, swelling, and morphology, of the developed composite hydrogel can be accurately modulated by varying the polysaccharide content. Importantly, cytotoxicity assays show the non-toxicity of this hybrid hydrogel. Furthermore, this hydrogel system can support cell proliferation, migration, and function. Altogether, our work proposes a new strategy to build a polysaccharide-constructed hydrogel scaffold, which holds much promise for tissue engineering in terms of cell engraftment, survival, proliferation, and function.

Multiple stimuli-switchable electrocatalysis and logic gates of rutin based on semi-interpenetrating polymer network hydrogel films

The switching properties of PAA–PDEA films polymerized as a semi-IPN were studied with rutin as a probe and a logic gate was constructed.

Potato Starch Hydrogels Produced by High Hydrostatic Pressure (HHP): A First Approach

Starch-based hydrogels have received considerable interest due to their safe nature, biodegradability and biocompatibility. The aim of this study was to verify the possibility of producing natural hydrogels based on potato starch by high hydrostatic pressure (HHP), identifying suitable processing conditions allowing to obtain stable hydrogels, as well as to characterize structural and mechanical properties of these products. Sieved (small size granules and medium size granules) and unsieved potato starch samples were used to prepare aqueous suspensions of different concentrations (10-30% w/w) which were processed at 600 MPa for 15 min at different temperatures (25, 40 and 50 °C). Products obtained were characterized by different techniques (light and polarized microscopy, Fourier transform infrared spectroscopy (FTIR), rheology and differential scanning calorimetry (DSC)). Results obtained so far demonstrated that potato starch suspensions (20% starch-water concentration (w/w)) with granules mean size smaller than 25 µm treated at 600 MPa for 15 min and 50 °C showed a complete gelatinization and gel-like appearance. Potato HHP hydrogels were characterized by high viscosity, shear-thinning behavior and a highly structured profile (G' >> G''). Moreover, their FTIR spectra, similarly to FTIR profiles of thermal gels, presented three absorption bands in the characteristic starch-gel region (950-1200 cm-1), whose intensity increased with decreasing the particle size and increasing the processing temperature. In conclusion, potato starch hydrogels produced by HHP in well-defined processing conditions exhibited excellent mechanical properties, which can be tailored according to the requirements of the different applications envisaged.

Study of the interaction between self-assembling peptide and mangiferin and in vitro release of mangiferin from in situ hydrogel

OBJECTIVE

This study aimed to investigate the interaction between the ion-complementary self-assembling peptide RADA16-I and the hydrophobic drug mangiferin (MA), and the potential of the self-assembling peptide to be exploited as a drug carrier of MA.

METHODS

The RADA16-I-MA suspension was prepared by magnetic stirring, followed by fluorescence spectrophotometry, particle size determination, rheological properties analysis, and in vitro release assay to characterize the interaction between RADA16-I and MA. Then, the effects of in situ MA-loaded hydrogel on the proliferation of KYSE 30 and DLD-1 tumor cells and the toxic effect of the hydrogel on 293T renal epithelial cells were studied by the Cell Counting Kit 8 method.

RESULTS

The RADA16-I-MA suspension was formed in water under magnetic stirring; the in situ hydrogel was formed when the suspension was added to PBS. The particle size in the RADA16-I-MA suspension was around 300-600 nm with an average size of 492 nm. Within 24 h, the cumulative release of MA from the RADA16-I-MA hydrogel was about 80%. The release rate of MA from the hydrogel was dependent on the concentration of RADA16-I and the release can be fitted with a first-order kinetic equation. The results suggested that the self-assembling peptide can stabilize MA in water to form a relatively stable suspension; the results also indicated that controlled release of MA from the RADA16-I-MA in situ hydrogel formed from the RADA16-I-MA suspension can be achieved by adjusting the concentration of the peptide in suspension. The cell viability studies showed that the RADA16-I-MA in situ hydrogel not only can maintain or enhance the intrinsic proliferation inhibition effects of MA on tumor cells, but also can reduce the toxicity of MA to normal cells.

CONCLUSION

The self-assembling peptide RADA16-I can be a potential candidate for constructing a delivery system of the hydrophobic drug MA.

Properties of interpenetrating polymer networks associating fibrin and silk fibroin networks obtained by a double enzymatic method

Fibrin gels are of interest as biomaterials for regenerative medicine but present poor mechanical properties, undergo fast degradation and strongly contract in presence of cells. To face these drawbacks, a fibrin network can be associated with another polymer network, in an Interpenetrating Polymer Network (IPN) architecture. In this study, we report the properties of an IPN comprising a fibrin (Fb) network and a silk fibroin (SF) network. This IPN is synthesized through the action of 2 enzymes, each one being specific of one protein gelation, i.e. thrombin (Tb) for Fb gelation, and horseradish peroxidase (HRP) for SF gelation. The effective formation of both Fb and SF networks in an IPN architecture was first verified at qualitative and quantitative levels. The resulting IPN was easily manipulable, displayed high viscoelastic properties and showed homogeneous macro- and micro-structure. Then the degradability of the IPN by two proteases, thermolysin (TL) and trypsin (TRY), obeying different mechanisms was presented. Finally, two-dimensional culture of human fibroblasts on the IPN surface induced little material contraction, while fibroblasts showed healthy morphology, displayed high viability and produced mature extracellular matrix (ECM) proteins. Taken together, the results suggest that this new IPN have a strong potential for tissue engineering and regenerative medicine.

Fabrication of novel carrageenan based stimuli responsive injectable hydrogels for controlled release of cephradine

Kappa carrageenan was used to prepare hydrogels having novel compositions with poly(vinyl alcohol) (PVA) and a crosslinker (3-aminopropyl)triethoxysilane (APTES). FTIR was used to confirm the structure and composition of hydrogels. The swelling behavior of hydrogels was studied under different conditions of pH and electrolytic aqueous media. The most efficient swelling result (200%) was observed by the sample containing a low fraction of crosslinker. It also showed different swelling responses in different pH solutions that made it suitable for drug delivery. Thermogravimetric analysis (TGA) illustrated that with the increase in crosslinker amount, the stability of hydrogel was increased. The biodegradation analysis of the hydrogels exhibited the break down by various enzymes into small chain polysaccharides that further broke down in the metabolic pathways. It was revealed that all the hydrogel samples showed strong antibacterial activity against S. aureus and a little against E. coli. Cephradine was used as a model drug and its in vitro release was studied in simulated intestinal fluids (SIF). This release account of the cephradine demonstrated that the release of the drug increased as the time and pH increased, reaching its maximum amount of 85.5% after 7.5 h.

Controlling methacryloyl substitution of chondroitin sulfate: injectable hydrogels with tunable long-term drug release profiles

Drug delivery systems capable of local sustained release of small molecule therapeutics remain a critical need in many fields, including oncology. Here, a system to create tunable hydrogels capable of modulating the loading and release of cationic small molecule therapeutics was developed. Chondroitin sulfate (CS) is a sulfated glycosaminoglycan that has many promising properties, including biocompatibility, biodegradation and chemically modifiable groups for both covalent and non-covalent bonding. CS was covalently modified with photocrosslinkable methacryloyl groups (CSMA) to develop an injectable hydrogel fabrication. Utilizing anionic groups, cationic drugs can be adsorbed and released from the hydrogels. This study demonstrates the synthesis of CSMA with a varying degree of substitution (DS) to generate hydrogels with varying swelling properties, maximum injection force, and drug release kinetics. The DS of the synthesized CSMA ranged from 0.05 ± 0.02 (2 h reaction) to 0.28 ± 0.02 (24 h reaction) with a DS of 1 representing 100% modification. The altered DS resulted in changes in hydrogel properties with the swelling of 20% CSMA hydrogels ranging from 42 (2 h reaction) to 13 (24 h reaction) and injection forces ranging from 18 N (2 h reaction) to 94 N (24 h reaction). The release of sunitinib, an oncology therapeutic that inhibits intracellular signaling by targeting multiple receptor tyrosine kinases, ranged from 18 μg per day (2 h reaction) to 9 μg per day (24 h reaction). While decreasing the DS increased the hydrogel swelling and rate of therapeutic release, it also limited the hydrogel fabrication range to only those containing 10% or higher CSMA. Blended polymer systems with poly(vinyl alcohol)-methacrylate (PVAMA) were fabricated to stabilize the resulting hydrogels via attenuating the swelling properties. Release profiles previously unattainable with the pure CSMA hydrogels were achieved with the blended hydrogel formulations. Overall, these studies identify a method to formulate tunable CSMA and blended CSMA/PVAMA hydrogels capable of sustained release of cationic therapeutics over six weeks with applications in oncology therapeutics.

Oral Administration of Salecan-Based Hydrogels for Controlled Insulin Delivery

We present an improved type of food gum (salecan) based hydrogels for oral delivery of insulin. Structural hydrogel formation was assessed with Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. We found that the hydrogel modulus, morphology, and swelling properties can be controlled by varying the salecan dose during hydrogel formation. Insulin was introduced into the hydrogel using a swelling-diffusion approach and then further used a drug prototype. In vitro insulin release profiles demonstrated that the release of entrapped insulin was suppressed in acidic conditions but markedly increased at neutral pH. Cell viability and toxicity tests revealed that the salecan hydrogel constructs were biocompatible. Oral administration of insulin-loaded salecan hydrogels in diabetic rats resulted in a sustained decrease of fasting plasma glucose levels over 6 h postadministration. For nondiabetic animals, the relative pharmacological bioavailability of insulin was significantly larger (6.24%, p < 0.05) for insulin-loaded hydrogels compared to free insulin. These results encourage further development of salecan-based hydrogels as vehicles for controlled insulin delivery following oral administration.

AuNPs-PCL nanocomposite accelerated abdominal wound healing through photothermal effect and improving cell adhesion

Accelerating wound healing with modified biomaterial has been an attracting field in both material science and medicine. Enhanced cell adhesion could be acquired by improving surface hydrophilicity, which contributes to accelerating wound healing. Chemical reaction has been used for surface modification, but this study used a simple and nontoxic method to improve the hydrophilicity. Polycaprolactone (PCL) scaffold has been regarded as promising material for wound healing while its surface is hydrophobic. Our study demonstrated enhanced hydrophilicity of PCL with AuNPs coating. AuNPs has good biocompatibility and excellent photothermal effect. The coating of AuNPs not only improved the cell adhesion, but also gave PCL the ability to inhibit the growth of bacteria. Animal study showed that the nanocomposites decreased lymphocytes and neutrophils, increased neovascularization and accelerated the abdominal wound healing, which was attributed to improved hydrophilicity and the antibacterial ability. In conclusion, we demonstrated that the nanocomposite could be used as a potential scaffold for cell adhesion and wound healing, and the role of AuNPs was highlighted as a kind of outstanding supplement.

Polysaccharide-based cationic hydrogels for dye adsorption

With advances in soft material design and engineering, naturally resourced polysaccharides have frequently been used to construct hydrogels because of their unique properties such as renewability, biodegradability and biocompatibility. In this work, we use a water-soluble microbial polysaccharide, salecan as a trapped natural polymer, poly(acrylamide-co-diallyldimethylammonium chloride) (PAD) as a functional matrix to prepare salecan/PAD hydrogels through a facile one-pot method. We employed a variety of spectroscopic techniques to probe the physicochemical properties of the designed hydrogels. The results demonstrated that salecan not only tuned the polarity of the PAD hydrogels, but also endowed them with adjustable water content. Subsequently, the adsorption performance of these hydrogels to methyl orange (MO) dye was investigated in detail. It was found that the salecan/PAD had the ability to remove MO from the surrounding aqueous solutions. In addition, adsorption kinetic data were nicely described by pseudo-second-order model and the adsorption isotherm data fitted well with the Freundlich equation. Having tailorable physicochemical properties coupled with the ability to uptake dye, these salecan-incorporated hydrogels could be promising platform for wastewater treatment and removal of heavy metal ions.

Polysaccharide and poly(methacrylic acid) based biodegradable elastomeric biocompatible semi-IPN hydrogel for controlled drug delivery

Nanoparticles embedded semi-interpenetrating (semi-IPNs) polymeric hydrogels with enhanced mechanical toughness and biocompatibility could have splendid biomedical acceptance. Here we propose poly(methacrylic acid) grafted polysaccharide based semi-IPNs filled with nanoclay via in situ Michael type reaction associated with covalent crosslinking with N,N-methylenebisacrylamide (MBA). The effect of nanoclay in the semi-IPN hydrogel has been investigated which showed significant improvement of mechanical robustness. Meanwhile, the hydrogels showed reversible ductility up to 70% in response to cyclic loading-unloading cycle which is an obvious phenomenon of rubber-like elasticity. The synthesized semi-IPN hydrogel show biodegradability and non-cytotoxic nature against human cells. The live-dead assay showed that the prepared hydrogel is a viable platform for cell growth without causing severe cell death. The in vitro drug release study in psychological pH (pH = 7.4) reveals that the controlled drug release phenomena can be tuned by simulating the environment pH. Such features in a single hydrogel assembly can propose this as high performance; biodegradable and non-cytotoxic 3D scaffold based promising biomaterial for tissue engineering.

Novel salicylic acid-based chemically crosslinked pH-sensitive hydrogels as potential drug delivery systems

In this work, salicylic acid (SA), a non-steroidal anti-inflammatory, was chemically incorporated into hydrogel systems to achieve sustained SA release profiles. With its anti-inflammatory properties, sustained release of SA would be relevant for treating diseases such as diabetes and cancer. In this work, SA was chemically incorporated into hydrogel systems via covalent attachment to an itaconate moiety followed by UV-initiated crosslinking using acrylic acid and poly(ethylene glycol) diacrylate. The chemical composition of the hydrogel system was confirmed using FT-IR spectroscopy. The SA-based hydrogels were designed as pH-responsive hydrogels, collapsing at acidic pH (1.2) values and swelling at higher pH (7.4) values for gastrointestinal-specific delivery. The hydrogel systems exhibited a pH-dependent SA release profile: SA release was much slower at pH 1.2 compared to pH 7.4. Under acidic pH conditions, 30wt% SA was released after 24h, whereas 100wt% SA was released in a sustained manner within 24h in pH 7.4 PBS buffer. The pore structure of the gel networks were studied using SEM and exhibit appropriate pore sizes (15-60μm) for physically encapsulating drugs. In addition, rheological studies of the hydrogels proved that these systems are mechanically strong and robust. Mucoadhesive behaviors were confirmed using a Texture Analyzer, the work of adhesion for the hydrogels was around 290 g·mm and the maximum detachment force was around 135g. The SA-based hydrogels demonstrate great potential for oral delivery of bioactives in combination with SA to treat serious diseases such as cancer and diabetes.