Ultra-sensitive detection of ibuprofen (IBP) by electrochemical aptasensor using the dendrimer-quantum dot (Den-QD) bioconjugate as an immobilization platform with special features

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens.

Central composite design-assisted visual and non-invasive detection of sertraline by sweet lemon waste-derived core-shell AuNPs@CDs

This study reports a fast and visual detection method of antidepressant sertraline (SRT) drug by the core-shell AuNPs@CDs as the nanoprobes. The CDs has been eco-friendly synthesized from sweet lemon wastes to directly reduce Au+ to AuNPs without any external photoirradiation process or additional reductants. Optimizing key variables that impact the sensing process has been done using the central composite design (CCD) approach to simulate the assay condition before the analysis. Adding SRT with different concentrations to the nanoprobes under mildly acidic conditions presents an absorbance peak at 560 nm with purple color tonalities that differ from the behavior of alone nanoprobes (530 nm, pink color). The obtained absorption change is linearly proportional to the increase of SRT concentration from 1 μM to 35 μM with a limit of detection (LOD) value of 100 nM. The color changes with a vivid tonality from pink and purple to violet as the colorful fingerprint patterns are readily traceable by the naked eye, allowing the visual assay of SRT. The greenness of the developed approach is well evaluated by some international indexes including the complimentary green analytical procedure (ComplexGAPI) and also, the analytical greenness (AGREE) indexes. The proposed waste-derived nanoprobes based on the eco-friendly procedure not only conduct quantitative and qualitative non-invasive analysis of SRT by the naked eye but also, may widen for other applications in various fields.

Smartphone-integrated tri-color fluorescence sensing platform based on acid-sensitive fluorescence imprinted polymers for dual-mode visual intelligent detection of ibuprofen, chloramphenicol and florfenicol

The abuse of multiple antibiotics and anti-inflammatory drugs can harm the ecological environment and human health. Herein, a smartphone-integrated tri-color fluorescence sensing platform based on acid-sensitive fluorescence imprinted polymers was proposed for dual-mode visual intelligent detection of ibuprofen (IP), chloramphenicol (CAP), and florfenicol (FF). In this research, the dual-mode of tri-color ratiometric fluorescence imprinted sensor (TC-FMIPs) was realized at different pH environments for the detection IP, CAP, and FF. The fluorescence peak at 551 nm of TC-FMIPs was quenched in the presence of IP solution and fluorescence peak at 687 nm was quenched in the presence of CAP phosphate buffer solution (PBS, pH 7.0), while the fluorescence peak at 433 nm kept stable. Interestingly, the TC-FMIPs has a peroxidase-like activity, in which a new fluorescence peak at 561 nm was quenched and the fluorescence peak at 433 nm increased gradually with the addition of FF solution in pH 4.0 PBS. The TC-FMIPs showed a low detection limit of 10 pM, 8.5 pM, and 5.5 nM for IP, CAP, and FF, respectively. Additionally, a smartphone was used to capture of fluorescence colors and read out the RGB values for intelligent detection of IP, CAP, and FF, in which the detection limit was calculated as 15 pM, 12 pM and 7 nM toward IP, CAP and FF, respectively. The smartphone-integrated tri-color fluorescence sensing platform was developed for dual-mode visual intelligent detection of IP, CAP and FF successfully, which provided a new strategy for multi-target detection in the complex environment.

Advances in polymer-based detection of environmental ibuprofen in wastewater

Globally, ibuprofen is the third most consumed drug and its presence in the environment is a concern because little is known about its adverse effects on humans and aquatic life. Environmentalists have made monitoring and the detection of ibuprofen in biological and environmental matrices a priority. For the detection and monitoring of ibuprofen, sensors and biosensors have provided rapid analysis time, sensitivity, high-throughput screening, and real-time analysis. Researchers are increasingly seeking eco-friendly technology, and this has led to an interest in developing biodegradable, bioavailable, and non-toxic sensors, or biosensors. The integration of polymers into sensor systems has proven to significantly improve sensitivity, selectivity, and stability and minimize sample preparation using bioavailable and biodegradable polymers. This review provides a general overview of perspectives and trends of polymer-based sensors and biosensors for the detection of ibuprofen compared to non-polymer-based sensors.

Risk assessment of selected pharmaceuticals on wildlife with nanomaterials based aptasensors

Pharmaceuticals have improved human and veterinary health tremendously over the years. But the implications of the presence of pharmaceuticals in the environment on terrestrial, avian, and aquatic organisms are still not fully comprehended. The bioaccumulation and biomagnifications of these chemicals through the food chain have long-term effects on the wildlife. The detection and quantification of such pharmaceutical residues in the environment is a tedious process and quicker methods are needed. Aptasensors are one such quick and reliable method for the identification of pharmaceutical residues in the wildlife. Aptasensors are a class of biosensors that work on the principles of biological recognition of elements. The aptamers are unique biological recognition elements with high specificity and affinity to various targets. Their efficiency makes them a very promising candidate for such sensitive research. In this review, the pharmaceutical threats to wildlife and their detection techniques using aptasensors have been discussed.

Recent advances in developing optical and electrochemical sensors for analysis of methamphetamine: A review

Recognition of misused stimulant drugs has always been a hot topic from a medical and judicial perspective. Methamphetamine (MAMP) is an addictive and illegal drug that profoundly affects the central nervous system. Like other illicit drugs, the detection of MAMP in biological and street samples is vital for several organizations such as forensic medicine, anti-drug headquarters and diagnostic clinics. By emerging nanotechnology and exploiting nanomaterials in sensing applications, a great deal of attention has been given to the design of analytical sensors in MAMP tracing. For the first time, this study has briefly reviewed all the optical and electrochemical sensors in MAMP detection from earlier so far. How various receptors with engineering nanomaterials allow developing novel approaches to measure MAMP have been studied. Fundamental concepts related to optical and electrochemical recognition assays in which nanomaterials have been used and relevant MAMP sensing applications have been comprehensively covered. Challenges, opportunities and future outlooks of this field have also been discussed at the end.

Voltammetric measurement of entacapone in the presence of other medicines against Parkinson's disease by a screen-printed electrode modified with sulfur-tin oxide nanoparticles

A screen-printed electrode (SPE) is described modified with sulfur-tin oxide nanoparticles (S@SnO₂NP) for the determination of entacapone (ENT) in the presence of other medicines against Parkinson's disease (PD). The S@SnO₂NP was synthesized through the hydrothermal method and used in the modification of the SPE. The smart utilization of the S@SnO₂NP and the SPE provided excellent properties such as high surface area and current density amplification by embedding an efficient sensing interface for highly selective electrochemical measurement. Under optimized experimental conditions, the anodic peak current related to the ENT oxidation onto the sensor surface at 0.46 V presented a linear response towards different ENT concentration sin the range 100 nM to 75 μM. The limit of detection (LOD) and electrochemical sensitivity were estimated to be 0.010 μM and 2.27 μA·μM^-1·cm^-2, respectively. The applicability of the sensor was evaluated during ENT determination in the presence of other conventional medicines againts, including levodopa (LD), carbidopa (CD), and pramipexole (PPX). The results of the analysis of human urine and pharmaceutical formulation as real samples using the developed sensor were in good agreement withre sults of high-performance liquid chromatography (HPLC) as a standard method. These findings demonstrated that the strategy based on the SPE is a cost-effective platform creating a promising candidate for practical determination of ENT in routine clinical testing.Graphical abstract.

The study of chiral recognition on ibuprofen enantiomers by a fluorescent probe based on β-cyclodextrin modified ZnS:Mn quantum dots

In this paper, a fluorescence method for chiral detection of ibuprofen and its enantiomer was developed. The L-cystenine-capped ZnS:Mn quantum dots were synthesized and functionalized with β-cyclodextrin (β-CD-QDs). The β-CD-QDs exhibited different quenching effect to the S-(+)-ibuprofen and the R-(-)-ibuprofen based on the advantage of the inclusion complex of cyclodextrin. It was found that the quenching of β-CD-QDs by S-(+)-ibuprofen was due to the formation of inclusion complex through both static quenching and photoinduced electron transfer, but only slight quenching with the R-(-)-ibuprofen. The stability constants derived from Hildebrand-Benesi method and absorption titration experiments were applied to determine the stability constants of the formed complexes, the double reciprocal plots suggest that a conclusion complex with a ratio of 1:1 was formed between β-CD-QDs and S-(+)-ibuprofen, but did not with the R-(-)-ibuprofen. The fluorescence intensity of the β-CD-QDs was linearly dependent on the concentration of the S-(+)-IBP in the range of 0-0.5 nmol/L with an limit of detection of 0.29 nmol/L.

Pharmacological Evaluation of Novel Organoiron Dendrimers as Antimicrobial and Anti-Inflammatory Agents

The synthesis of a novel and attractive class of nonsteroidal anti-inflammatory and antimicrobial organoiron dendrimers attached to the well-known drug ibuprofen is achieved. The structures of these dendrimers are established by spectroscopic and analytical techniques. The antimicrobial activity of these dendrimers is investigated and tested against five human pathogenic Gram-positive and Gram-negative bacteria, and minimum inhibitory concentrations are reported. Some of these synthesized dendrimers exhibit higher inhibitory activity against methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus faecium, and Staphylococcus warneri compare to the reference drugs. As well, the in vitro and in vivo anti-inflammatory activities of these dendrimers are evaluated. The results of in vivo anti-inflammatory activity and histopathology of inflamed paws show that all dendrimers display considerable anti-inflammatory activity; however, second-generation dendrimer (G2-D6) shows the best anti-inflammatory activity, which is more potent than the commercial drug ibuprofen at the same tested dose. Results of the toxicity study reveal that G2-D6 is the safest drug on biological tissues.

Quantum dots as nanosensors for detection of toxics: a literature review

Great advances have been made in sensor-based methods for chemical analysis owing to their high sensitivity, selectivity, less testing time, and minimal usage of chemical reagents. Quantum Dots (QDs) having excellent optical properties have been thoroughly explored for variety of scientific applications wherein light plays an important role. In recent years, there have been an increasing number of publications on the applications of QDs as photoluminescent nanosensors for the detection of chemicals and biomolecules. However, there has been hardly any publication describing the use of QDs in the detection of various toxic chemicals at one place. Hence, a literature survey has been made on the applications of QDs as chemosensors for the detection of gaseous, anionic, phenolic, metallic, drug-overdose, and pesticide poison so as to open a new perspective towards the role of sensors in analytical toxicology. In this review, the QD-based analysis of biospecimens for poison detection in clinical and forensic toxicology laboratories is highlighted.

Impedimetric Aptamer-Based Biosensors: Applications

Impedimetric aptamer-based biosensors show high potential for handheld devices and point-of-care tests. In this review, we report on recent advances in aptamer-based impedimetric biosensors for applications in biotechnology. We detail on analytes relevant in medical and environmental biotechnology as well as food control, for which aptamer-based impedimetric biosensors were developed. The reviewed biosensors are examined for their performance, including sensitivity, selectivity, response time, and real sample validation. Additionally, the benefits and challenges of impedimetric aptasensors are summarized.

Applicability of AuNPs@N-GQDs nanocomposite in the modeling of the amplified electrochemical Ibuprofen aptasensing assay by monitoring of riboflavin

Here, an ultrasensitive and low-cost electrochemical aptasensing assay is developed based on the applicability of a fabricated nanocomposite from nitrogen-doped graphene quantum dots (N-GQDs) and gold nanoparticles (AuNPs). A modified glassy carbon electrode (GCE) with the AuNPs@N-GQDs nanocomposite (AuNPs@N-GQDs/GCE) as an efficient platform has some unique properties such as high surface area and electrical conductivity. Furthermore, the prepared platform is capable of more loading of aptamer (Apt) molecules as a biological recognition element of Ibuprofen (IBP) on the modified electrode surface. It is noteworthy that in this study, riboflavin (RF) as a universal green probe is used for the first time for electrochemical detection of IBP. According to the proposed strategy and under the optimum condition, the unprecedented detection limit (LOD) of this assay (33.33 aM) is lower than previously reported analytical methods. The results demonstrate the ability of the nanocomposite for designing of the aptasensor, integrated within the electrode format, to cheaper and simpler detection of the IBP with a specificity and sensitivity sufficient for analysis in real samples. It seems that the proposed strategy based on the AuNPs@N-GQDs nanocomposite can be expanded to other nanomaterials. So, this is expected to have promising implications in the design of electrochemical sensors or biosensors for the detection of various targets.

Electrochemical aptamer-based sensors for food and water analysis: A review

Global food and water safety issues have prompted the development of highly sensitive, specific, and fast analytical techniques for food and water analysis. The electrochemical aptamer-based detection platform (E-aptasensor) is one of the more promising detection techniques because of its unique combination of advantages that renders these sensors ideal for detection of a wide range of target analytes. Recent research results have further demonstrated that this technique has potential for real world analysis of food and water contaminants. This review summaries the recently developed E-aptasensors for detection of analytes related to food and water safety, including bacteria, mycotoxins, algal toxins, viruses, drugs, pesticides, and metal ions. Ten different electroanalytical techniques and one opto-electroanalytical technique commonly employed with these sensors are also described. In addition to highlighting several novel sensor designs, this review also describes the strengths, limitations, and current challenges this technology faces, and future development trend.