Electrospinning of gelatin with tunable fiber morphology from round to flat/ribbon

From Synthesis to Functionality: Tailored Ionic Liquid-Based Electrospun Fibers with Superior Antimicrobial Properties

Herein, we report an efficient and facile strategy for the preparation of imidazolium-based ionic liquid (IL) monomers ([CnVIm][Br], n = 2, 4, 6, 8, 10, and 12) and their corresponding polymeric ionic liquids (PILs) with potent antimicrobial activities against Gram-negative and Gram-positive bacteria and fungi. The electrospinning technique was utilized to tailor the polymers with the highest antimicrobial potency into porous membranes that can be easily implemented into diverse systems and extend their practical bactericidal application. The antimicrobial mechanism of obtained ILs, polymers, and nanomaterials is considered concerning the bearing chain length, polymerization process, and applied processing technique that provides a unique fibrous structure. The structure composition was selected due to the well-established inherent amphiphilicity that 1-alkylimidazolium ILs possess, coupled with proven antimicrobial, antiseptic, and antifungal behavior. The customizable nature of ILs and PILs complemented with electrospinning is exploited for the development of innovative antimicrobial performances born from the intrinsic polymer itself, offering solutions to the increasing challenge of bacterial resistance. This study opens up new prospects toward designer membranes providing a complete route in their designing and revolutionizing the approach of fabricating multi-functional systems with tunable physicochemical, surface properties, and interesting morphology.

Optimization of Diclofenac-Loaded Bicomponent Nanofibers: Effect of Gelatin on In Vitro and In Vivo Response

The use of electrospun fibers as anti-inflammatory drug carriers is currently one of the most interesting approaches for the design of drug delivery systems. In recent years, biodegradable polymers blended with naturally derived ones have been extensively studied to fabricate bioinspired platforms capable of driving biological responses by releasing selected molecular/pharmaceutical signals. Here, sodium diclofenac (DicNa)-loaded electrospun fibers, consisting of polycaprolactone (PCL) or gelatin-functionalized PCL, were studied to evaluate fibroblasts' in vitro and in vivo response. In vitro studies demonstrated that cell adhesion of L929 cells (≈70%) was not affected by the presence of DicNa after 4 h. Moreover, the initial burst release of the drug from PD and PGD fibers, e.g., 80 and 48%, respectively, after 5 h-combined with its sustained release-did not produce any cytotoxic effect and did not negatively influence the biological activity of the cells. In particular, it was demonstrated that the addition of gelatin concurred to slow down the release mechanism, thus limiting the antiproliferative effect of DicNa, as confirmed by the significant increase in cell viability and collagen deposition after 7 days, with respect to PCL alone. In vivo studies in a rat subcutaneous model also confirmed the ability of DicNa-loaded fibers to moderate the inflammatory/foreign body response independently through the presence of gelatin that played a significant role in supporting the formation of small-caliber vessels after 10 days of implantation. All of these results suggest using bicomponent fibers loaded with DicNa as a valid therapeutic tool capable of supporting the wound healing process and limiting in vivo inflammation and rejection phenomena.

Electrospun nanofiber mats caged the mammalian macrophages on their surfaces and prevented their inflammatory responses independent of the fiber diameter

Poly-ε-caprolactone (PCL) has been widely used as biocompatible materials in tissue engineering. They have been used in mammalian cell proliferation to polarization and differentiation. Their modified versions had regulatory activities on mammalian macrophages in vitro. There are also studies suggesting different nanofiber diameters might alter the biological activities of these materials. Based on these cues, we examined the inflammatory activities and adherence properties of mammalian macrophages on electrospun PCL nanofibrous scaffolds formed with PCL having different nanofiber diameters. Our results suggest that macrophages could easily attach and get dispersed on the scaffolds. Macrophages lost their inflammatory cytokine TNF and IL6 production capacity in the presence of LPS when they were incubated on nanofibers. These effects were independent of the mean fiber diameters. Overall, the scaffolds have potential to be used as biocompatible materials to suppress excessive inflammatory reactions during tissue and organ transplantation by caging and suppressing the inflammatory cells.

Application of nanofiber-based drug delivery systems in improving anxiolytic effect of new 1,2,3-triazolo-1,4-benzodiazepine derivatives

Anxiety disorders are highly prevalent worldwide and can affect people of all ages, genders and backgrounds. Much efforts and resources have been directed at finding new anxiolytic agents and drug delivery systems (DDSs) especially for cancer patients to enhance targeted drug delivery, reduce drug adverse effects, and provide an analgesic effect. The aim of this study was (1) to design and develop novel nanofiber-based DDSs intended for the oral administration of new 1,2,3-triazolo-1,4-benzodiazepines derivatives, (2) to investigate the physical solid-state properties of such drug-loaded nanofibers, and (3) to gain knowledge of the anxiolytic activity of the present new benzodiazepines in rodents in vivo. The nanofibers loaded with 1,2,3-triazolo-1,4-benzodiazepine derivatives were prepared by means of electrospinning (ES). Field-emission scanning electron microscopy and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy were used for the physicochemical characterization of nanofibers. The anxiolytic activity of new derivatives and drug-loaded nanofibers was studied with an elevated plus maze test and light-dark box test. New 1,2,3-triazolo-1,4-benzodiazepine derivatives showed a promising anxiolytic effect in mice with clear changes in behavioral reactions in both tests. The nanofiber-based DDS was found to be feasible in the oral delivery of the present benzodiazepine derivatives. The nanofibers generated by means of ES presented the diameter in a nanoscale, uniform fiber structure, capacity for drug loading, and the absence of defects. The present findings provide new insights in the drug treatment of anxiety disorders with new benzodiazepine derivatives.

Development of halochromic electrospun labels for non-invasive shelf life assessment of rainbow trout (Oncorhynchus mykiss): Incorporation of barberry anthocyanin extract in protein-based smart packaging

Using barberry (Berberis vulgaris L.) as a natural dye in combination with electrospinning technology represents a promising approach for the development of intelligent packaging systems. In this study, the influence of different concentrations of zein (16, 18, and 20%) and barberry anthocyanin-rich powder (BARP) (16, 18, and 20%) on the surface tension and rheological properties of the solution were evaluated. The most favorable nanofibers (NFs) were obtained from a solution containing 18% (w/w) zein under constant voltage. The surface morphology, size, and color-changing properties of electrospun NFs derived from zein polymers containing different concentrations of BARP (16, 18, and 20%) under various electrical fields (20, 22, and 24 kV) were evaluated. The Fourier-transform infrared spectroscopy analysis confirmed the interaction of BARP within the zein-based NFs. The results indicated that the concentration of BARP had a noticeable impact on the physicochemical properties of the NFs. Furthermore, efficacy of the appropriately fabricated halochromic label was evaluated for monitoring the packed rainbow trout fillet during refrigerated storage. On the 10th day, a noticeable visual color turned from pink to pale yellow was observed in response to pH variations. Additionally, the TVN value confirmed the effectiveness of halochromic electrospun labels for non-invasive assessment of fish fillet quality.

Pulmonary decellularized extracellular matrix (dECM) modified polyethylene terephthalate three-dimensional cell carriers regulate the proliferation and paracrine activity of mesenchymal stem cells

Introduction: Mesenchymal stem cells (MSCs) possess a high degree of self-renewal capacity and in vitro multi-lineage differentiation potential. Decellularized materials have garnered considerable attention due to their elevated biocompatibility, reduced immunogenicity, excellent biodegradability, and the ability to partially mimic the in vivo microenvironment conducive to cell growth. To address the issue of mesenchymal stem cells losing their stem cell characteristics during two-dimensional (2D) cultivation, this study established three-dimensional cell carriers modified with lung decellularized extracellular matrix and assessed its impact on the life activities of mesenchymal stem cells. Methods: This study employed PET as a substrate material, grafting with polydopamine (PDA), and constructing a decellularized extracellular matrix (dECM) coating on its surface, thus creating the PET/PDA/dECM three-dimensional (3D) composite carrier. Subsequently, material characterization of the cellular carriers was conducted, followed by co-culturing with human umbilical cord mesenchymal stem cells in vitro, aiming to investigate the material's impact on the proliferation and paracrine activity of mesenchymal stem cells. Results and Discussion: Material characterization demonstrated successful grafting of PDA and dECM materials, and it had complete hydrophilicity, high porosity, and excellent mechanical properties. The material was rich in various ECM proteins (collagen I, collagen IV , laminin, fibronectin, elastin), indicating good biocompatibility. In long-term in vitro cultivation (14 days) experiments, the PET/PDA/dECM three-dimensional composite carrier significantly enhanced adhesion and proliferation of human umbilical cord-derived mesenchymal stem cells (HUCMSCs), with a proliferation rate 1.9 times higher than that of cells cultured on tissue culture polystyrene (TCPS) at day 14. Furthermore, it effectively maintained the stem cell characteristics, expressing specific antigens for HUCMSCs. Through qPCR, Western blot, and ELISA experiments, the composite carrier markedly promoted the expression and secretion of key cell factors in HUCMSCs. These results demonstrate that the PET/PDA/dECM composite carrier holds great potential for scaling up MSCs' long-term in vitro cultivation and the production of paracrine factors.

Recent trends in the application of protein electrospun fibers for loading food bioactive compounds

Electrospun fibers (EFs) have emerged as promising one-dimensional materials for a myriad of research/commercial applications due to their outstanding structural and physicochemical features. Polymers of either synthetic or natural precursors are applied to design EFs as carriers for bioactive compounds. For engineering food systems, it is crucial to exploit polymers characterized by non-toxicity, non-immunogenicity, biocompatibility, slow/controllable biodegradability, and structural integrity. The unique attributes of protein-based biomaterials endow a wide diversity of desirable features to EFs for meeting the requirements of advanced food/biomedical applications. In this review paper, after an overview on electrospinning, different protein materials (plant- and animal-based) as biodegradable/biocompatible building blocks for designing EFs will be highlighted. The potential application of protein-based EFs in loading bioactive compounds with the intention to inspire interests in both academia and industry will be summarized. This review concludes with a discussion of prevailing challenges in using protein EFs for the bioactive vehicle development.

Multifunctional Electrospun Nanofibers for Biosensing and Biomedical Engineering Applications

Nanotechnology is experiencing unprecedented developments, leading to the advancement of functional nanomaterials. The properties that stand out include remarkable porosity, high-specific surface area, excellent loading capacity, easy modification, and low cost make electrospun nanofibers. In the biomedical field, especially in biosensors, they exhibit amazing potential. This review introduces the principle of electrospinning, describes several structures and biomaterials of electrospun nanofibers used for biomedicine, and summarizes the applications of this technology in biosensors and other biomedical applications. In addition, the technical challenges and limitations of electrospinning for biomedicine are discussed; however, more research work is needed to elucidate its full potential.

Fabrication of multi-functional gelatin/deep eutectic solvent/polyacrylonitrile nanofiber membranes via electrospinning

In this work, gelatin was dissolved in sodium acetate trihydrate/urea deep eutectic solvent (DES) and then mixed with polyacrylonitrile (PAN) spinning solution to prepare composite nanofiber membranes via electrospinning. The rheological properties of gelatin/DES (Gel/DES) solution and gelatin/DES/PAN (GDES/PAN) spinning solution were investigated. Besides, the water vapor transmittance rate, water contact angle, and antistatic and mechanical properties of GDES/PAN nanofiber membranes had also been evaluated and the composition and structure of GDES/PAN nanofiber membranes had also been characterized by SEM, EDS and FTIR further. Due to the introduction of DES components and gelatin, the composite nanofibers presented a smooth surface, small diameter, uniform distribution and good continuity. GDES/PAN nanofiber membranes also exhibited desirable breathable properties, hydrophilicity, antistatic properties and mechanical strength compared with the PAN nanofiber membrane. GDES/PAN nanofiber membranes would provide new opportunities for the application of gelatin and DES in the electrospinning field.

Synthesis of Polyvinyl Alcohol/Coal Fly Ash Hybrid Nano-Fiber Membranes for Adsorption of Heavy Metals in Diesel Fuel

Some studies have shown that the heavy metal emissions (HMEs) emitted from diesel engines can seriously threaten human health. HMEs are mainly related to the content of heavy metal ions in diesel fuel. Therefore, in order to reduce HMEs from diesel engines, a nano-fiber membrane filtration technology for diesel fuel was investigated. Herein, coal fly ash (CFA) from coal-fired power plants combined with polyvinyl alcohol (PVA) was successfully fabricated into nano-fibrous membranes using green electrospinning technology. In order to evaluate the adsorption properties, various hybrid membranes with different mixing ratios (PVA/CFA = 10/0, 10/1, 10/3, 10/5, and 10/7 by weight) were fabricated. The results show that eight metal ions with different concentrations are found in the diesel fuel, including Pb, Cu, Zn, Al, Fe, Cr, Ba, and Ni. All PVA/FA membranes have different adsorption capacities for metal ions, following the order: Cu > Fe > Pb > Al > Zn > Cr > Ba > Ni. In addition, the adsorption capacity of CFA3 (PVA/CFA = 10/3) is the largest. The super lipophilicity of the PVA/FA membranes also provide more adsorption sites for the contact of HMs with the membranes. The above research results provide guidance for development of ultra-fine filters in the future.

Engineered Shellac Beads-on-the-String Fibers Using Triaxial Electrospinning for Improved Colon-Targeted Drug Delivery

Colon-targeted drug delivery is gradually attracting attention because it can effectively treat colon diseases. Furthermore, electrospun fibers have great potential application value in the field of drug delivery because of their unique external shape and internal structure. In this study, a core layer of hydrophilic polyethylene oxide (PEO) and the anti-colon-cancer drug curcumin (CUR), a middle layer of ethanol, and a sheath layer of the natural pH-sensitive biomaterial shellac were used in a modified triaxial electrospinning process to prepare beads-on-the-string (BOTS) microfibers. A series of characterizations were carried out on the obtained fibers to verify the process-shape/structure-application relationship. The results of scanning electron microscopy and transmission electron microscopy indicated a BOTS shape and core-sheath structure. X-ray diffraction results indicated that the drug in the fibers was in an amorphous form. Infrared spectroscopy revealed the good compatibility of the components in the fibers. In vitro drug release revealed that the BOTS microfibers provide colon-targeted drug delivery and zero-order drug release. Compared to linear cylindrical microfibers, the obtained BOTS microfibers can prevent the leakage of drugs in simulated gastric fluid, and they provide zero-order release in simulated intestinal fluid because the beads in BOTS microfibers can act as drug reservoirs.

Gelatin nanofibers: Recent insights in synthesis, bio-medical applications and limitations

The use of gelatin and gelatin-blend polymers as environmentally safe polymers to synthesis electrospun nanofibers, has caused a revolution in the biomedical field. The development of efficient nanofibers has played a significant role in drug delivery, and for use in advanced scaffolds in regenerative medicine. Gelatin is an exceptional biopolymer, which is highly versatile, despite variations in the processing technology. The electrospinning process is an efficient technique for the manufacture of gelatin electrospun nanofibers (GNFs), as it is simple, efficient, and cost-effective. GNFs have higher porosity with large surface area and biocompatibility, despite that there are some drawbacks. These drawbacks include rapid degradation, poor mechanical strength, and complete dissolution, which limits the use of gelatin electrospun nanofibers in this form for biomedicine. Thus, these fibers need to be cross-linked, in order to control its solubility. This modification caused an improvement in the biological properties of GNFs, which made them suitable candidates for various biomedical applications, such as wound healing, drug delivery, bone regeneration, tubular scaffolding, skin, nerve, kidney, and cardiac tissue engineering. In this review an outline of electrospinning is shown with critical summary of literature evaluated with respect to the various applications of nanofibers-derived gelatin.

Multifunctional electrospun membranes with hydrophilic and hydrophobic gradients property for wound dressing

Achieving sustained and stable release of macromolecular antibacterial agents and unidirectional transport of liquids in targeted environment is still a challenge to be addressed in the management of wounds with large amounts of tissue exudates. In this work, a multilayer electrospun membrane (ethylcellulose-ethylcellulose/gelatin-quercetin/Eudragit L-100/polyethylene glycol, EC-EC/Gel-Q/EL/PEG) was designed with hydrophobic-hydrophilic gradients and drug sustained-release properties controlled by self-pumping effect and prepared using sequential electrospinning technology. The capillary force of different layers in the multilayer membrane could be controlled by precisely tuning the polymer concentrations of the inner and middle layers to extract water directly from hydrophobic inner ethylcellulose (EC) layer to hydrophilic middle ethylcellulose/gelatin (EC/Gel) layer. The droplets could not penetrate the hydrophobic side, but the drug molecules in the outer layer quercetin-loaded Eudragit L-100 (Q/EL/PEG) membrane moved after absorbing a large amount of water. The drug release behavior of multilayer wound dressing mainly followed the Korsmeyer-Peppas model. This multifunctional electrospun membrane could rapidly drive the biofluid outflow, effectively block the invasion of external contaminants and continuously release anti-inflammatory drugs, without any obvious cytotoxicity to mouse fibroblast cells. Hence, the above results indicate the excellent therapeutic potential of the proposed biomaterial as a wound dressing for diabetic patients.

Self-assembled emulsion gel based on modified chitosan and gelatin: Anti-inflammatory and improving cellular uptake of lipid-soluble actives

To obtain a green carrier for intestinal targeted delivery, an emulsion gel was designed by the self-assembly between gelatin and Pickering emulsion based on gallic acid modified-chitosan nanoparticles (GCS NPs). The emulsion gels loaded with garlic essential oil (Geo) and curcumin (Cur) were abbreviated as GOEG and GCEG, respectively. Meanwhile, the sodium alginate bead loaded with Geo (GOEGS₃) and the bead loaded with Cur (GCEGS) were prepared as controls. Results demonstrated that the emulsion gels significantly improved the bioaccessibility of Geo and Cur, showing great intestinal targeting delivery properties comparable to that of sodium alginate beads. Moreover, Caco-2 cell experiments indicated that GOEG and GCEG displayed good biocompatibility and enhanced cellular uptake of Geo and Cur. The emulsion gels also exhibited excellent anti-inflammatory properties in the lipopolysaccharide-induced cell model, exhibiting great potential for clinical application. This work provides some references for the preparation of multifunctional emulsion gels with excellent delivery performance by a green method.

Recent advances in electrospun protein fibers/nanofibers for the food and biomedical applications

Electrospinning (ES) is one of the most investigated processes for the convenient, adaptive, and scalable manufacturing of nano/micro/macro-fibers. With this technique, virgin and composite fibers may be made in different designs using a wide range of polymers (both natural and synthetic). Electrospun protein fibers (EPF) shave desirable capabilities such as biocompatibility, low toxicity, degradability, and solvolysis. However, issues with the proteins' processibility have limited their widespread utilization. This paper gives an overview of the features of protein-based biomaterials, which are already being employed and has the potential to be exploited for ES. State-of-the-art examples showcasing the usefulness of EPFs in the food and biomedical industries, including tissue engineering, wound dressings, and drug delivery, provided in the applications. The EPFs' future perspective and the challenge they pose are presented at the end. It is believed that protein and biopolymeric nanofibers will soon be manufactured on an industrial scale owing to the limitations of employing synthetic materials, as well as enormous potential of nanofibers in other fields, such as active food packaging, regenerative medicine, drug delivery, cosmetic, and filtration.

Extracellular matrix mechanobiology in cancer cell migration

The extracellular matrix (ECM) is pivotal in modulating tumor progression. Besides chemically stimulating tumor cells, it also offers physical support that orchestrates the sequence of events in the metastatic cascade upon dynamically modulating cell mechanosensation. Understanding this translation between matrix biophysical cues and intracellular signaling has led to rapid growth in the interdisciplinary field of cancer mechanobiology in the last decade. Substantial efforts have been made to develop novel in vitro tumor mimicking platforms to visualize and quantify the mechanical forces within the tissue that dictate tumor cell invasion and metastatic growth. This review highlights recent findings on tumor matrix biophysical cues such as fibrillar arrangement, crosslinking density, confinement, rigidity, topography, and non-linear mechanics and their implications on tumor cell behavior. We also emphasize how perturbations in these cues alter cellular mechanisms of mechanotransduction, consequently enhancing malignancy. Finally, we elucidate engineering techniques to individually emulate the mechanical properties of tumors that could help serve as toolkits for developing and testing ECM-targeted therapeutics on novel bioengineered tumor platforms. STATEMENT OF SIGNIFICANCE: Disrupted ECM mechanics is a driving force for transitioning incipient cells to life-threatening malignant variants. Understanding these ECM changes can be crucial as they may aid in developing several efficacious drugs that not only focus on inducing cytotoxic effects but also target specific matrix mechanical cues that support and enhance tumor invasiveness. Designing and implementing an optimal tumor mimic can allow us to predictively map biophysical cue-modulated cell behaviors and facilitate the design of improved lab-grown tumor models with accurately controlled structural features. This review focuses on the abnormal changes within the ECM during tumorigenesis and its implications on tumor cell-matrix mechanoreciprocity. Additionally, it accentuates engineering approaches to produce ECM features of varying levels of complexity which is critical for improving the efficiency of current engineered tumor tissue models.

Essential Oil—Loaded Nanofibers for Pharmaceutical and Biomedical Applications: A Systematic Mini-Review

Essential oils (EOs) have been widely exploited for their biological properties (mainly as antimicrobials) in the food industry. Encapsulation of EOs has opened the way to the utilization of EOs in the pharmaceutical and biomedical fields. Electrospinning (ES) has proved a convenient and versatile method for the encapsulation of EOs into multifunctional nanofibers. Within the last five years (2017–2022), many research articles have been published reporting the use of ES for the fabrication of essential oil—loaded nanofibers (EONFs). The objective of the present mini-review article is to elucidate the potential of EONFs in the pharmaceutical and biomedical fields and to highlight their advantages over traditional polymeric films. An overview of the conventional ES and coaxial ES technologies for the preparation of EONFs is also included. Even though EONFs are promising systems for the delivery of EOs, gaps in the literature can be recognized (e.g., stability studies) emphasizing that more research work is needed in this field to fully unravel the potential of EONFs.

Nitric Oxide-Releasing Nanofibrous Scaffolds Based on Silk Fibroin and Zein with Enhanced Biodegradability and Antibacterial Properties

Clinical applications of scaffolds and implants have been associated with bacterial infection resulting in impaired tissue regeneration. Nanofibers provide a versatile structure for both antimicrobial molecule delivery and tissue engineering. In this study, the nitric oxide (NO) donor molecule S-nitrosoglutathione (GSNO) and the natural biodegradable polymer zein (ZN) were combined with silk fibroin (SF) to develop antibacterial and biodegradable nanofibrous scaffolds for tissue engineering applications. The compatibility and intermolecular interactions of SF and ZN were studied using differential scanning calorimetry and Fourier transform infrared spectroscopy. The incorporation of ZN increased the hydrophobicity of the fibers and resulted in a more controlled and prolonged NO release profile lasting for 48 h. Moreover, the degradation kinetics of the fibers was significantly improved after blending with ZN. The results of tensile testing indicated that the addition of ZN and GSNO had a positive effect on the strength and stretchability of SF fibers and did not adversely affect their mechanical properties. Finally, due to the antibacterial properties of both NO and ZN, the SF-ZN-GSNO fibers showed a synergistically high antibacterial efficacy with 91.6 ± 2.5% and 77.5 ± 3.1% reduction in viability of adhered Staphylococcus aureus and Escherichia coli after 24 h exposure, respectively. The developed NO-releasing fibers were not only antibacterial but also non-cytotoxic and successfully enhanced the proliferation and growth of fibroblast cells, which was quantitatively studied by a CCK-8 assay and visually observed through fluorescent staining. Overall, SF-ZN-GSNO fibers developed in this study were biodegradable and highly antibacterial and showed great cytocompatibility with fibroblasts, indicating their promising potential for a range of tissue engineering and medical device applications.

State-of-the-Art Review of Electrospun Gelatin-Based Nanofiber Dressings for Wound Healing Applications

Electrospun nanofiber materials have been considered as advanced dressing candidates in the perspective of wound healing and skin regeneration, originated from their high porosity and permeability to air and moisture, effective barrier performance of external pathogens, and fantastic extracellular matrix (ECM) fibril mimicking property. Gelatin is one of the most important natural biomaterials for the design and construction of electrospun nanofiber-based dressings, due to its excellent biocompatibility and biodegradability, and great exudate-absorbing capacity. Various crosslinking approaches including physical, chemical, and biological methods have been introduced to improve the mechanical stability of electrospun gelatin-based nanofiber mats. Some innovative electrospinning strategies, including blend electrospinning, emulsion electrospinning, and coaxial electrospinning, have been explored to improve the mechanical, physicochemical, and biological properties of gelatin-based nanofiber mats. Moreover, numerous bioactive components and therapeutic agents have been utilized to impart the electrospun gelatin-based nanofiber dressing materials with multiple functions, such as antimicrobial, anti-inflammation, antioxidation, hemostatic, and vascularization, as well as other healing-promoting capacities. Noticeably, electrospun gelatin-based nanofiber mats integrated with specific functions have been fabricated to treat some hard-healing wound types containing burn and diabetic wounds. This work provides a detailed review of electrospun gelatin-based nanofiber dressing materials without or with therapeutic agents for wound healing and skin regeneration applications.

Core-Shell Magnetoactive PHB/Gelatin/Magnetite Composite Electrospun Scaffolds for Biomedical Applications

Novel hybrid magnetoactive composite scaffolds based on poly(3-hydroxybutyrate) (PHB), gelatin, and magnetite (Fe₃O₄) were fabricated by electrospinning. The morphology, structure, phase composition, and magnetic properties of composite scaffolds were studied. Fabrication procedures of PHB/gelatin and PHB/gelatin/Fe₃O₄ scaffolds resulted in the formation of both core-shell and ribbon-shaped structure of the fibers. In case of hybrid PHB/gelatin/Fe₃O₄ scaffolds submicron-sized Fe₃O₄ particles were observed in the surface layers of the fibers. The X-ray photoelectron spectroscopy results allowed the presence of gelatin on the fiber surface (N/C ratio–0.11) to be revealed. Incubation of the composite scaffolds in saline for 3 h decreased the amount of gelatin on the surface by more than ~75%. The differential scanning calorimetry results obtained for pure PHB scaffolds revealed a characteristic melting peak at 177.5 °C. The presence of gelatin in PHB/gelatin and PHB/gelatin/Fe₃O₄ scaffolds resulted in the decrease in melting temperature to 168–169 °C in comparison with pure PHB scaffolds due to the core-shell structure of the fibers. Hybrid scaffolds also demonstrated a decrease in crystallinity from 52.3% (PHB) to 16.9% (PHB/gelatin) and 9.2% (PHB/gelatin/Fe₃O₄). All the prepared scaffolds were non-toxic and saturation magnetization of the composite scaffolds with magnetite was 3.27 ± 0.22 emu/g, which makes them prospective candidates for usage in biomedical applications.

Research progress, models and simulation of electrospinning technology: a review

In recent years, nanomaterials have aroused extensive research interest in the world's material science community. Electrospinning has the advantages of wide range of available raw materials, simple process, small fiber diameter and high porosity. Electrospinning as a nanomaterial preparation technology with obvious advantages has been studied, such as its influencing parameters, physical models and computer simulation. In this review, the influencing parameters, simulation and models of electrospinning technology are summarized. In addition, the progresses in applications of the technology in biomedicine, energy and catalysis are reported. This technology has many applications in many fields, such as electrospun polymers in various aspects of biomedical engineering. The latest achievements in recent years are summarized, and the existing problems and development trends are analyzed and discussed.

Fabrication and Characterization of Gelatin/Zein Nanofiber Films Loading Perillaldehyde for the Preservation of Chilled Chicken

Perillaldehyde is a natural antibacterial agent extracted from perilla essential oil. In our methodology, five antibacterial nanofiber packaging films are prepared by loading different concentrations of perillaldehyde (P) into gelatin/zein (G/Z) polymers. Morphology observations show that the G/Z/P film had a good uniform microstructure and nano-diameter as the weight ratio of 5:1:0.02 (G/Z/P). Fourier transform infrared spectroscopy, and X-ray indicate that these three ingredients had good compatibility and strong interaction via hydrogen bonding. Water contact angle results show that the G/Z/P films gradually change from hydrophilic to hydrophobic with the increase of perillaldehyde. Thermal analysis indicates that the G/Z/P (5:1:0.02) film has good thermal stability. Antibacterial and storage analysis indicates that G/Z/P (5:1:0.02) film is effective to inactivate Staphylococcus aureus and Salmonella enteritidis, and obviously reduces the increasing rate of total bacteria counts and volatile basic nitrogen of chicken breasts. This study indicates that the G/Z/P (5:1:0.02) is a kind of potential antibacterial food packaging film.

Electrospun meshes of poly (n-butyl cyanoacrylate) and their potential applications for drug delivery and tissue engineering

The aim of the present work was to develop novel meshes of poly (n-butyl cyanoacrylate) (PBCA) nanofibers for potential applications in drug delivery and tissue engineering taking into account the successful application of PBCA in other medical uses. Electrospinning was applied to solutions of PBCA, 10³ and 10⁶ Da. 5-fluorouracil was chosen as model drug for the delivery study because of its effectiveness against cancer, while human gingival fibroblasts (HFIB-G) to confirm the biocompatibility of drug-free PBCA meshes and their potential for tissue engineering. PBCA was able to be electrospun in a wide range of molecular weights, producing fibers free of defects with diameters between 380 nm and 6 μm. Meshes of PBCA (10⁵-10⁶ Da) showed high flexibility with Younǵs modulus and maximal tension values in the range of 0.3-1.6 MPa and 0.03-0.13 MPa respectively. Results from the drug delivery study suggested that 5-fluorouracil was homogeneously loaded into PBCA meshes. Its release was extremely slow, initially 20% in 7 days and the rest gradually (until 96 days) in physiological medium at 37 °C. HFIB-G were well attached and proliferated over PBCA nanofibers during 23 days. Results suggested that PBCA meshes serve as excellent frameworks for cell adhesion/proliferation, and for drug delivery extended periods.

Effect of heat treatment on the structure and stability of Grass pea (Lathyrus sativus) protein isolate/Alyssum homolocarpum seed gum nanoparticles

In the present study, Grass pea protein isolate (GPPI)- Alyssum homolocarpum seed gum (AHSG) complex nanoparticles were formed through two fabrication methods and their physicochemical properties, structure and stability against sodium chloride and different pHs were investigated. Type 1 particles were formed by creating GPPI nanoparticles, and then coating them with AHSG; while Type 2 particles were fabricated through the heat treatment of GPPI-AHSG complexes at 85 °C for 15 min. The preparation methods did not influence the magnitude of electrical charges on biopolymer particles. The particle size analysis revealed that Type 2 particles had lower mean diameter (d = 360.20 nm) compared to Type 1 particles (d = 463.22 nm). Structural properties of Type 1 and Type 2 particles were determined using Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), Differential scanning calorimetry (DSC), Atomic force microscopy (AFM), and transmission electron microscopy (TEM). Hydrogen bonding, electrostatic and hydrophobic interactions were the main driving forces contributed to the formation of both GPPI-AHSG complex particles. Assessments of morphological and structural properties also indicated that both Type 1 and 2 particles had spherical shapes and heat treatment increased the ordered intermolecular structures in biopolymer particles. Type 2 particles had higher denaturation temperature and better pH and salt stability when compared to Type 1 particles. These results indicate that thermal treatment was effective for the fabrication of stable GPPI-AHSG complex nanoparticles.

From cells-on-a-chip to organs-on-a-chip: scaffolding materials for 3D cell culture in microfluidics

It is an emerging research area to integrate scaffolding materials in microfluidic devices for 3D cell culture (organs-on-a-chip). The technology of organs-on-a-chip holds the potential to obviate the gaps between pre-clinical and clinical studies. As accumulating evidence shows the importance of extracellular matrix in in vitro cell culture, significant efforts have been made to integrate 3D ECM/scaffolding materials in microfluidics. There are two families of materials that are commonly used for this purpose: hydrogels and electrospun fibers. In this review, we briefly discuss the properties of the materials, and focus on the various technologies to obtain the materials (e.g. extraction of collagen from animal tissues) and to include the materials in microfluidic devices. Challenges and potential solutions of the current materials and technologies were also thoroughly discussed. At the end, we provide a perspective on future efforts to make these technologies more translational to broadly benefit pharmaceutical and pathophysiological research.

Antioxidant stability enhancement of carotenoid rich-extract from Cantaloupe melon (Cucumis melo L.) nanoencapsulated in gelatin under different storage conditions

The study evaluated the potential and antioxidant stability of nanoencapsulated carotenoid-rich extract (CE) from Cantaloupe melon (EPG). DPPH and ABTS radical scavenging assays were used to investigate the nanoencapsulation effect on antioxidant potential. CE and EPG stability were evaluated at 25 °C and 5 °C, with and without light (1600 lx) for 60 days, determining the β-carotene concentration by UHPLC and antioxidant potential by ABTS. The antioxidant potential of carotenoids increased after nanoencapsulation (57-59%). After 60 days, there was low retention of β-carotene (0-43.6%) in the CE, mainly at 25 °C light (0.00%) and dark (10.0%), and total loss of activity in the four conditions. EPG preserved the β-carotene concentration in the dark at 25 °C (99.0%) and in the light (83.1%) and dark (99.0%) at 5 °C, maintaining the antioxidant potential (68.7-48.3%). Therefore, EPG enhanced and stabilized the antioxidant potential of carotenoids, beneficial to human health.

Fabrication of green poly(vinyl alcohol) nanofibers using natural deep eutectic solvent for fast-dissolving drug delivery

Fast-dissolving drug delivery systems are essential to drug delivery owing to the enhanced drug solubility, controlled drug concentration, target and rapid drug delivery. In this study, we developed fast-dissolving drug delivery systems using honey and acetylsalicylic acid-embedded poly(vinyl alcohol) (PVA) nanofibers based on natural deep eutectic solvent (DES). The efficacy of our fast-dissolving drug delivery system was tested by incorporating honey and acetylsalicylic acid in the PVA nanofibers. Firstly, the morphology and structure of the functional PVA–DES nanofibers (PVA–DES–honey and PVA–DES–ASA) were observed and analyzed, which proved the successful preparation of functional PVA–DES nanofibers. NIH/3T3 and HepG2 cells incubated on the nanofiber had more than 90% of cell viability, suggesting our materials were biocompatible and non-toxic. The nanofiber materials dissolved rapidly in artificial saliva solutions, suggesting potential use of our materials for fast dissolving drug delivery in oral cavities. The honey incorporated PVA nanofiber (PVA–DES–honey) showed a total bacterial reduction of 37.0% and 37.9% against E. coli and S. aureus, respectively, after 6 hour incubation in bacterial cultures. Furthermore, in vivo study proved that the PVA–DES–honey nanofibers accelerated the wound healing process, and they improved the wound healing rate on rat skin to 85.2% after 6 days of surgery, when compared to the control PVA (68.2%) and PVA–DES (76.3%) nanofibers. Overall, the nanofiber materials reported in our study showed potential as a green and biocompatible fast-dissolving drug delivery system and can be used for pharmaceutical fields, such as antibacterial wound dressing and oral ulcer stickers.

We report an environmental friendly method to construct honey/ASA embedded poly(vinyl alcohol) nanofibers based on natural deep eutectic solvent for fast-dissolving drug delivery firstly.

Electrospun Nanofibers for Improved Angiogenesis: Promises for Tissue Engineering Applications

Angiogenesis (or the development of new blood vessels) is a key event in tissue engineering and regenerative medicine; thus, a number of biomaterials have been developed and combined with stem cells and/or bioactive molecules to produce three-dimensional (3D) pro-angiogenic constructs. Among the various biomaterials, electrospun nanofibrous scaffolds offer great opportunities for pro-angiogenic approaches in tissue repair and regeneration. Nanofibers made of natural and synthetic polymers are often used to incorporate bioactive components (e.g., bioactive glasses (BGs)) and load biomolecules (e.g., vascular endothelial growth factor (VEGF)) that exert pro-angiogenic activity. Furthermore, seeding of specific types of stem cells (e.g., endothelial progenitor cells) onto nanofibrous scaffolds is considered as a valuable alternative for inducing angiogenesis. The effectiveness of these strategies has been extensively examined both in vitro and in vivo and the outcomes have shown promise in the reconstruction of hard and soft tissues (mainly bone and skin, respectively). However, the translational of electrospun scaffolds with pro-angiogenic molecules or cells is only at its beginning, requiring more research to prove their usefulness in the repair and regeneration of other highly-vascularized vital tissues and organs. This review will cover the latest progress in designing and developing pro-angiogenic electrospun nanofibers and evaluate their usefulness in a tissue engineering and regenerative medicine setting.

Bactericidal coating to prevent early and delayed implant-related infections

The occurrence of an implant-associated infection (IAI) with the formation of a persisting bacterial biofilm remains a major risk following orthopedic biomaterial implantation. Yet, progress in the fabrication of tunable and durable implant coatings with sufficient bactericidal activity to prevent IAI has been limited. Here, an electrospun composite coating was optimized for the combinatorial and sustained delivery of antibiotics. Antibiotics-laden poly(ε-caprolactone) (PCL) and poly`1q`(lactic-co glycolic acid) (PLGA) nanofibers were electrospun onto lattice structured titanium (Ti) implants. In order to achieve tunable and independent delivery of vancomycin (Van) and rifampicin (Rif), we investigated the influence of the specific drug-polymer interaction and the nanofiber coating composition on the drug release profile and durability of the polymer-Ti interface. We found that a bi-layered nanofiber structure, produced by electrospinning of an inner layer of [PCL/Van] and an outer layer of [PLGA/Rif], yielded the optimal combinatorial drug release profile. This resulted in markedly enhanced bactericidal activity against planktonic and adherent Staphylococcus aureus for 6 weeks as compared to single drug delivery. Moreover, after 6 weeks, synergistic bacterial killing was observed as a result of sustained Van and Rif release. The application of a nanofiber-filled lattice structure successfully prevented the delamination of the multi-layer coating after press-fit cadaveric bone implantation. This new lattice design, in conjunction with the multi-layer nanofiber structure, can be applied to develop tunable and durable coatings for various metallic implantable devices. This is particularly appealing to tune the release of multiple antimicrobial agents over a period of weeks to prevent early and delayed onset IAI.

Coaxial electrospinning of PEEU/gelatin to fiber meshes with enhanced mesenchymal stem cell attachment and proliferation

Microfibers with a core-shell structure can be produced by co-axial electrospinning, allowing for the functionalization of the outer layer with bioactive molecules. In this study, a thermoplastic, degradable polyesteretherurethane (PEEU), consisting of poly(p-dioxanone) (PPDO) and poly(ɛ-caprolactone) (PCL) segments with different PPDO to PCL weight ratios, were processed into fiber meshes by co-axial electrospinning with gelatin. The prepared PEEU fibers have a diameter of 1.3±0.5 μm and an elastic modulus of around 5.1±1.0 MPa as measured by tensile testing in a dry state at 37°C, while the PEEU/Gelatin core-shell fibers with a gelatin content of 12±6 wt% and a diameter of 1.5±0.5 μm possess an elastic modulus of 15.0±1.1 MPa in a dry state at 37 °C but as low as 0.7±0.7 MPa when hydrated at 37 °C. Co-axial electrospinning allowed for the homogeneous distribution of the gelatin shell along the whole microfiber. Gelatin with conjugated Fluorescein (FITC) remained stable on the PEEU fibers after 7 days incubation in Phosphate-buffered saline (PBS) at 37 °C. The gelatin coating on PEEU fibers lead to enhanced human adipose tissue derived mesenchymal stem cell (hADSC) attachment and a proliferation rate 81.7±34.1 % higher in cell number in PEEU50/Gelatin fibers after 7 days of cell culture when compared to PEEU fibers without coating. In this work, we demonstrate that water-soluble gelatin can be incorporated as the outer shell of a polymer fiber via molecular entanglement, with a sustained presence and role in enhancing stem cell attachment and proliferation.

The miscibility and spatial distribution of the components in electrospun polymer–protein mats

Biodegradable blended electrospun mats are promising for biomedical applications such as wound dressing, tissue engineering, and drug delivery. Electrospun mats based on polyesters can be modified by the addition of other polymers or proteins to accelerate the degradation, improve mechanical properties or biocompatibility. However, relatively little is known about the distribution of the components throughout the blended mats. In the present work, we prepared polylactide (PLA), bovine serum albumin (BSA), and the blended PLA–BSA electrospun mats. We demonstrated that PLA and BSA are miscible in a common solvent HFIP (1,1,1,3,3,3-hexafluoro-2-propanol) at concentrations below 3%, but become immiscible as concentration increases. We used three methods (fluorescence microscopy, EDX, and Raman microspectroscopy) to validate that PLA and BSA can be blended in a single electrospun fiber despite the phase separation in the blend. The homogeneity of the blend influences on the homogeneity of the distribution of PLA and BSA components throughout the electrospun mat, as measured by Raman microspectroscopy. When the blended electrospun mats were incubated in water, they demonstrated the prolonged release of BSA. The presented results show a step-by-step approach for manufacturing blended electrospun mats made of immiscible components, which involves the analysis of component miscibility, the mat morphology, and composition. This approach can be used for the rational design of multicomponent electrospun mats.

Polylactide and bovine serum albumin can be combined in a single electrospun fiber, despite the phase separation.

Preparation of tannin-immobilized gelatin/PVA nanofiber band for extraction of uranium (VI) from simulated seawater

A novel gelatin/PVA composite nanofiber band loaded with bayberry tannin (GPNB-BT) was prepared by electrostatic spinning and crosslinking for extraction of uranium (VI) from simulated seawater. The influential factors of tannin loaded on the nanofiber band were investigated in detail. Surface morphology and fiber diameter of GPNB-BT were studied by Scanning Electron Microscopy (SEM). Functional groups of GPNB-BT were investigated by Fourier Transform Infrared Spectrometer (FTIR). The adsorption process and mechanism of uranium on GPNB-BT was characterized by Energy Dispersive X-ray (EDX) and X-ray Photoelectron Spectroscopy (XPS). The results revealed that the BT had been stably solidified on the GPNB. Compared with other tannin-immobilized membranes, the nano-network structure of GPNB-BT with 200-400 nm diameter of fibers can promote solidification of tannins and improve adsorption capacity of GPNB-BT for uranium. The maximum adsorption capacity of the GPNB-BT for uranium is 170 mg/g at the optimal pH of 5.5 in 80 mg/L of initial uranium concentration and 1.4 μg/g even at extremely low initial concentration of 3 μg/L in the simulated seawater for 24 h. The GPNB-BT with good hydraulic properties, floatability and adsorption capacity for uranium is expected to be widely used in separation and enrichment of uranium in seawater and radioactive waste water.

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core⁻shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Formation and Stability of Core-Shell Nanofibers by Electrospinning of Gel-Like Corn Oil-in-Water Emulsions Stabilized by Gelatin

Core-shell nanofibers were fabricated by electrospinning of gel-like corn oil emulsions stabilized by gelatin. The oil-in-water (O/W) emulsions satisfied the Herschel-Bulkley rheological model and showed shear-thinning and predominantly elastic gel behaviors. The increasing oil fractions (φ) ranging from 0 to 0.6 remarkably increased the apparent viscosity and then led to an increase in the average diameter and encapsulation efficiency of electrospun fibers. Core-shell structured fibers by emulsion electrospinning were observed in transmission electron microscopy (TEM) images. The encapsulated oil was found to randomly distribute as core, especially inside the beads. The binding of corn oil to gelatin was mainly driven by noncovalent forces. These core-shell fibers at various φ values (φ = 0.2, 0.4, 0.6, and 0.8) showed a high thermal decomposition stability upon heating to 250 °C, and the denaturation temperatures were 85.32 °C, 77.97 °C, 82.99 °C, and 87.25 °C, respectively. The corn oil encapsulated in emulsion-based fiber mats had good storage stability during 5 days. These results contributed to a good understanding of emulsion electrospinning of food materials for potential applications in bioactive encapsulation, enzyme immobilization, and active food packaging.