1
|
Cheng Z, Wang Q, Lei L, Zhao B, Yu T, Fan J, Li Y. The key role of unique crystalline property in the hydrolytic degradation process of microcrystalline cellulose-reinforced stereo-complexed poly(lactic acid) composites. Int J Biol Macromol 2024; 275:133656. [PMID: 38969048 DOI: 10.1016/j.ijbiomac.2024.133656] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2024] [Revised: 06/18/2024] [Accepted: 07/02/2024] [Indexed: 07/07/2024]
Abstract
Stereo-complexed poly(lactic acid) (SC-PLA) has unique stereo-complexed crystallites (SC) and homogeneous crystallites (HC), but the effect of this special crystalline property on the hydrolytic degradation of SC-PLA has not been researched. In this study, the hygrothermal aging behaviour of injection-molded SC-PLA and SC-PLA/microcrystalline cellulose (MCC) composites at different temperatures (25 °C and 60 °C) was investigated from micro- and macroscopic perspectives. The results demonstrated that the hydrolysis of SC-PLA was sequentially dominated by the amorphous region, the homogeneous crystalline region, the stereo-complexed crystalline region (three stages). The hydrolytic degradation of SC-PLA only completed the first stage after 4 weeks aging at 25 °C, while it was in the third stage after 4 weeks aging at 60 °C. On this basis, the accelerating effect of 10 wt% MCC on the hydrolysis process of SC-PLA at different stages was investigated. It was found that MCC shortened the hydrolysis time in the stereo-complexed crystalline region by reducing the rearrangement of amorphous structure to form SC and causing cracks and interfacial deterioration by water absorption-swelling-degradation. In addition, the thermal properties and impact strength of SC-PLA and SC-PLA/MCC composites decreased dramatically due to rapid hydrolytic degradation at 60 °C. Overall, the results of this study can provide theoretical basis for the application of SC-PLA and SC-PLA/MCC composites in hygrothermal environment.
Collapse
Affiliation(s)
- Zefei Cheng
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China
| | - Qianghua Wang
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China
| | - Lulu Lei
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China
| | - Binbin Zhao
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China
| | - Tao Yu
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China; State Key Laboratory of Pollution Control and Resources Reuse, Tongji University, Shanghai 200092, PR China.
| | - Jinhong Fan
- State Key Laboratory of Pollution Control and Resources Reuse, Tongji University, Shanghai 200092, PR China
| | - Yan Li
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, PR China
| |
Collapse
|
2
|
Chen X, Zhong L, Gong X. Robust Superhydrophobic Films Based on an Eco-Friendly Poly(l-lactic acid)/Cellulose Composite with Controllable Water Adhesion. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:10362-10373. [PMID: 38691669 DOI: 10.1021/acs.langmuir.4c01077] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2024]
Abstract
Poly(l-lactic acid) (PLLA) featuring desirable biodegradability and biocompatibility has been recognized as one of the promising eco-friendly biomaterials. However, low crystallization and poor mechanical and chemical performances dramatically hamper its practical application. In this work, we report that functionalized cellulose/PLLA composite superhydrophobic stereocomplex films with controllable water adhesion and protein adsorption can be fabricated by a facile approach for the first time. First, cellulose is surface-modified by means of two silanization modification methods. Then, superhydrophobic cellulose/PLLA composite films are prepared through a solvent-evaporation-induced phase separation method. The two cellulose/PLLA composite films exhibit extreme water repellency but tunable water adhesion from sticky to slippery. The protein adsorption capacity of the cellulose/PLLA composite films can also be regulated. In addition, the stereocomplexation of the composite film provides excellent mechanical properties with an elongation at break of 22.36%, which is 237.8% higher than that of a pure PLLA film, which is more suitable for biomaterials. Furthermore, good biodegradability of the PLLA composite films in nature enables the bio-based composites as alternative materials to replace conventional petroleum-based polymers. The superhydrophobic films have also been demonstrated for many applications, including slippery surfaces, liquid transportation without loss, and antifouling.
Collapse
Affiliation(s)
- Xuefeng Chen
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070, People's Republic of China
| | - Lingqi Zhong
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070, People's Republic of China
| | - Xiao Gong
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070, People's Republic of China
| |
Collapse
|
3
|
Çakmak A, Fuerkaiti S, Karagüzel D, Karaaslan Ç, Gümüşderelioğlu M. Enhanced Osteogenic Potential of Noggin Knockout C2C12 Cells on BMP-2 Releasing Silk Scaffolds. ACS Biomater Sci Eng 2023; 9:6175-6185. [PMID: 37796024 PMCID: PMC10646847 DOI: 10.1021/acsbiomaterials.3c00506] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Accepted: 08/28/2023] [Indexed: 10/06/2023]
Abstract
The CRISPR/Cas9 mechanism offers promising therapeutic approaches for bone regeneration by stimulating or suppressing critical signaling pathways. In this study, we aimed to increase the activity of BMP-2 signaling through knockout of Noggin, thereby establishing a synergistic effect on the osteogenic activity of cells in the presence of BMP-2. Since Noggin is an antagonist expressed in skeletal tissues and binds to subunits of bone morphogenetic proteins (BMPs) to inhibit osteogenic differentiation, here Noggin expression was knocked out using the CRISPR/Cas9 system. In accordance with this purpose, C2C12 (mouse myoblast) cells were transfected with CRISPR/Cas9 plasmids. Transfection was achieved with Lipofectamine and confirmed with intense fluorescent signals in microscopic images and deletion in target sequence in Sanger sequencing analysis. Thus, Noggin knockout cells were identified as a new cell source for tissue engineering studies. Then, the transfected cells were seeded on highly porous silk scaffolds bearing BMP-2-loaded silk nanoparticles (30 ng BMP-2/mg silk nanoparticle) in the size of 288 ± 62 nm. BMP-2 is released from the scaffolds in a controlled manner for up to 60 days. The knockout of Noggin by CRISPR/Cas9 was found to synergistically promote osteogenic differentiation in the presence of BMP-2 through increased Coll1A1 and Ocn expression and mineralization. Gene editing of Noggin and BMP-2 increased almost 2-fold Col1A1 expression and almost 3-fold Ocn expression compared to the control group. Moreover, transfected cells produced extracellular matrix (ECM) containing collagen fibers on the scaffolds and mineral-like structures were formed on the fibers. In addition, mineralization characterized by intense Alizarin red staining was detected in transfected cells cultured in the presence of BMP-2, while the other groups did not exhibit any mineralized areas. As has been demonstrated in this study, the CRISPR/Cas9 mechanism has great potential for obtaining new cell sources to be used in tissue engineering studies.
Collapse
Affiliation(s)
- Anıl
Sera Çakmak
- Department
of Chemical Engineering, Hacettepe University, 06800 Ankara, Turkey
| | - Sümeyra Fuerkaiti
- Division
of Bioengineering, Graduate School of Science and Engineering, Hacettepe University, 06800 Ankara, Turkey
| | - Dilara Karagüzel
- Department
of Biology, Molecular Biology Section, Hacettepe
University, 06800 Ankara, Turkey
| | - Çağatay Karaaslan
- Division
of Bioengineering, Graduate School of Science and Engineering, Hacettepe University, 06800 Ankara, Turkey
- Department
of Biology, Molecular Biology Section, Hacettepe
University, 06800 Ankara, Turkey
| | - Menemşe Gümüşderelioğlu
- Department
of Chemical Engineering, Hacettepe University, 06800 Ankara, Turkey
- Division
of Bioengineering, Graduate School of Science and Engineering, Hacettepe University, 06800 Ankara, Turkey
| |
Collapse
|
4
|
Jiang Z, Xue B, Mai X, Wu C, Zeng L, Xie L, Zheng Q. Integrating Fly Ash-Controlled Surface Morphology and Candle Grease Coating: Access to Highly Hydrophobic Poly (L-lactic Acid) Composite for Anti-Icing Application. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:1230. [PMID: 37049323 PMCID: PMC10096872 DOI: 10.3390/nano13071230] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 03/27/2023] [Accepted: 03/27/2023] [Indexed: 06/19/2023]
Abstract
New ways of recycling fly ash are of great significance for reducing the environmental pollution. In this work, biodegradable hydrophobic poly (L-lactic acid)/fly ash composites for anti-icing application were successfully fabricated via a facile solvent-volatilization-induced phase separation approach. A silane coupling agent of 3-(Trimethoxysilyl) propyl methacrylate was used to decorate a fly ash surface (FA@KH570) for strengthening the interface bonding between fly ash and poly (L-lactic acid). Moreover, FA@KH570 could obviously enhance the crystallinity of poly (L-lactic acid) (PLLA)/FA@KH570 composites, which accelerated the conversion from the liquid-liquid to the liquid-solid phase separation principle. Correspondingly, the controllable surface morphology from smooth to petal-like microspheres was attained simply by adjusting the FA@KH570 content. After coating nontoxic candle grease, the apparent contact angle of 5 wt% PLLA/FA@KH570 composite was significantly increased to an astonishing 151.2°, which endowed the composite with excellent anti-icing property. This strategy paves the way for recycling waste fly ash and manufacturing hydrophobic poly (L-lactic acid) composite for potential application as an anti-icing material for refrigerator interior walls.
Collapse
Affiliation(s)
- Zhiqiang Jiang
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
| | - Bai Xue
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
- National Engineering Research Center for Compounding and Modification of Polymer Materials, National and Local Joint Engineering Research Center for Functional Polymer Membrane Materials and Membrane Processes, Guiyang 550014, China
| | - Xiaoping Mai
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
| | - Changmei Wu
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
| | - Lingjun Zeng
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
| | - Lan Xie
- Department of Polymer Materials and Engineering, College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; (Z.J.); (X.M.); (C.W.); (L.Z.)
- State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
- National Engineering Research Center for Compounding and Modification of Polymer Materials, National and Local Joint Engineering Research Center for Functional Polymer Membrane Materials and Membrane Processes, Guiyang 550014, China
| | - Qiang Zheng
- Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China;
| |
Collapse
|
5
|
Gao F, Tong Z, Xiao W, Liu Q, Lu J, Hou Y, He Q, Gao X, Cheng D, Zhan X, Ma Y, Zhang Q. Structural Engineering of Hierarchical Aerogels Hybrid Networks for Efficient Thermal Comfort Management and Versatile Protection. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023:e2301164. [PMID: 36919943 DOI: 10.1002/smll.202301164] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Revised: 02/20/2023] [Indexed: 06/18/2023]
Abstract
In recent years, growing concerns regarding energy efficiency and heat mitigation, along with the critical goal of carbon neutrality, have drawn human attention to the zero-energy-consumption cooling technique. Passive daytime radiative cooling (PDRC) can be an invaluable tool for combating climate change by dispersing ambient heat directly into outer space instead of just transferring it across the surface. Although significant progress has been made in cooling mechanisms, materials design, and application exploration, PDRC faces challenges regarding functionality, durability, and commercialization. Herein, a silica nanofiber aerogels (SNAs) functionalized poly(vinylidene fluoride-co-hexafluoropropene) (P(VDF-HFP)) membrane (SFP membrane), inspired by constructional engineering is constructed. As-prepared membranes with flexible network structure combined hierarchical structure design and practicability principal. As the host material for thermal comfort management (TCM) and versatile protection, the SFP membrane features a large surface area, porous structure, and a robust skeleton that can render excellent mechanical properties. Importantly, the SFP membrane can keep exceptional solar reflectivity (0.95) and strong mid-infrared emittance (0.98) drop the temperature to 12.5 °C below ambient and 96 W m-2 cooling power under typical solar intensities over 910 W m-2 . This work provides a promising avenue for high performance aerogel membranes that can be created for use in a wide variety of applications.
Collapse
Affiliation(s)
- Feng Gao
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Zheming Tong
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Weiqiang Xiao
- Research department of technology center, Zhejiang China Tobacco Industry Co., Ltd, Hangzhou, 310027, China
| | - Quan Liu
- Special polymer research institute, Quzhou Research Institute Zhejiang University, Quzhou, 324000, China
| | - Jianguo Lu
- State Key Laboratory of Silicon Materials, Key Laboratory for Biomedical Engineering of Ministry of Education, School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Yang Hou
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
- Special polymer research institute, Quzhou Research Institute Zhejiang University, Quzhou, 324000, China
| | - Qinggang He
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Xiang Gao
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Dangguo Cheng
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
- Special polymer research institute, Quzhou Research Institute Zhejiang University, Quzhou, 324000, China
| | - Xiaoli Zhan
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
- Special polymer research institute, Quzhou Research Institute Zhejiang University, Quzhou, 324000, China
| | - Yaoguang Ma
- State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, International Research Center for Advanced Photonics, Zhejiang University, Hangzhou, 310058, China
| | - Qinghua Zhang
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou, 310027, China
- Special polymer research institute, Quzhou Research Institute Zhejiang University, Quzhou, 324000, China
| |
Collapse
|
6
|
Tong M, Ma B, Wang X, He Y, Yu J. A feasible strategy to balance the performance of stereo-complexed polylactide by incorporating poly(butylene adipate-co-terephthalate). Int J Biol Macromol 2023; 228:366-373. [PMID: 36581027 DOI: 10.1016/j.ijbiomac.2022.12.257] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2022] [Revised: 12/09/2022] [Accepted: 12/22/2022] [Indexed: 12/27/2022]
Abstract
The raw material of polylactide (PLA) is lactic acid obtained by biological fermentation. PLA is the most promising degradable polymer to replace traditional plastics to address the pollution problems caused by their non-degradability. However, the application of PLA is hindered by its low softening temperature, easy hydrolysis, and poor toughness. Herein, the ternary composites with PLLA, PDLA and Poly (butylene adipate-co-terephthalate) (PBAT) were prepared by melt blending to balance its thermal stability, hydrolysis, and toughness. The effects of PBAT content (3 %, 6 %, 9 % and 12 %) and isothermal crystallization temperature on composite properties were fully investigated. The results show that the composite of stereo-complexed PLA (sc-PLA) with 6 % PBAT crystallized at 110 °C exhibits good comprehensive properties. Its vicat softening temperature (VST), mass loss rate under alkaline (pH = 12) and breaking elongation are 166 °C, 21.6 % and 4.40 %, respectively. Compared with the pure PLLA sample crystallized at same condition, the VST, mass loss rate and breaking elongation are 159 °C, 24.7 % and 3.76 % respectively, which increased by nearly 5 %, 13 % and 20 %. This indicates that this strategy is feasible to balance the heat resistance, hydrolysis resistance and toughness of PLA, while it sacrifices the tensile strength a little. This work provides a new way to modify and improve the PLA properties. Nonetheless, it is also necessary to coordinate the compatibility of PLA and PBAT.
Collapse
Affiliation(s)
- Minjie Tong
- College of Textiles, Donghua University, Shanghai 201620, PR China
| | - Bomou Ma
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, PR China.
| | - Xueli Wang
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, PR China
| | - Yong He
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, PR China
| | - Jianyong Yu
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, PR China; College of Textiles, Donghua University, Shanghai 201620, PR China
| |
Collapse
|
7
|
Kumar A, Sood A, Han SS. Technological and structural aspects of scaffold manufacturing for cultured meat: recent advances, challenges, and opportunities. Crit Rev Food Sci Nutr 2022; 63:585-612. [PMID: 36239416 DOI: 10.1080/10408398.2022.2132206] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
In vitro cultured meat is an emerging area of research focus with an innovative approach through tissue engineering (i.e., cellular engineering) to meet the global food demand. The manufacturing of lab-cultivated meat is an innovative business that alleviates life-threatening environmental issues concerning public health and animal well-being on the global platform. There has been a noteworthy advancement in cultivating artificial meat, but still, there are numerous challenges that impede the swift headway of lab-grown meat production at a commercially large scale. In this review, we focus on the manufacturing of edible scaffolds for cultured meat production. In brief, first an introduction to cultivating artificial meat and its current scenario in the market is provided. Further, a discussion on the understanding of composition, cellular, and molecular communications in muscle tissue is presented, which are vital to scaling up the production of lab-grown meat. In continuation, the major components (e.g., cells, biomaterial scaffolds, and their manufacturing technologies, media, and potential bioreactors) for cultured meat production are conferred followed by a comprehensive discussion on the most recent advances in lab-cultured meat. Finally, existing challenges and opportunities including future research perspectives for scaling-up cultured meat production are discussed with conclusive interpretations.
Collapse
Affiliation(s)
- Anuj Kumar
- School of Chemical Engineering, Yeungnam University, Gyeongsan, South Korea.,Research Institute of Cell Culture, Yeungnam University, Gyeongsan, South Korea
| | - Ankur Sood
- School of Chemical Engineering, Yeungnam University, Gyeongsan, South Korea
| | - Sung Soo Han
- School of Chemical Engineering, Yeungnam University, Gyeongsan, South Korea.,Research Institute of Cell Culture, Yeungnam University, Gyeongsan, South Korea
| |
Collapse
|
8
|
Flexure-resistant and additive-free poly (L-lactic acid) hydrophobic membranes fabricated by slow phase separation. Int J Biol Macromol 2022; 209:1605-1612. [PMID: 35413322 DOI: 10.1016/j.ijbiomac.2022.04.051] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2022] [Revised: 04/05/2022] [Accepted: 04/06/2022] [Indexed: 11/21/2022]
Abstract
PLLA membranes with excellent ductility were successfully prepared by a simple solvent evaporation-induced precipitation method, without any additive. The excellent mechanical properties are mainly attributed to the interconnecting pore morphology and the plastic deformation of the pore wall during the stretching process. The interconnecting pore morphology is determined by delaying non-solvent diffusion and molecular chain pre-nucleation. It was found that the average pore size gradually decreased from 19.25 μm to 6.71 μm as the concentration of the polymer solution increased from 0.03 g/ml to 0.10 g/ml, and the elongation at break of the membrane can reach 130.8%. The crystallinity is between 33.4% and 44.5%, and the crystal form is a perfect α crystal. Membrane with interconnecting pore structure contributes to the formation of 91.2% porosity. Furthermore, the solvent evaporation-induced precipitation method can also form surfaces containing micro-nano structures which significantly improves surface hydrophobicity. The combination of high porosity and hydrophobicity makes the membrane potentially applicable to the field of oil-water separation.
Collapse
|
9
|
Biodegradable Poly(D-L-lactide-co-glycolide) (PLGA)-Infiltrated Bioactive Glass (CAR12N) Scaffolds Maintain Mesenchymal Stem Cell Chondrogenesis for Cartilage Tissue Engineering. Cells 2022; 11:cells11091577. [PMID: 35563883 PMCID: PMC9100331 DOI: 10.3390/cells11091577] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 05/01/2022] [Accepted: 05/03/2022] [Indexed: 12/11/2022] Open
Abstract
Regeneration of articular cartilage remains challenging. The aim of this study was to increase the stability of pure bioactive glass (BG) scaffolds by means of solvent phase polymer infiltration and to maintain cell adherence on the glass struts. Therefore, BG scaffolds either pure or enhanced with three different amounts of poly(D-L-lactide-co-glycolide) (PLGA) were characterized in detail. Scaffolds were seeded with primary porcine articular chondrocytes (pACs) and human mesenchymal stem cells (hMSCs) in a dynamic long-term culture (35 days). Light microscopy evaluations showed that PLGA was detectable in every region of the scaffold. Porosity was greater than 70%. The biomechanical stability was increased by polymer infiltration. PLGA infiltration did not result in a decrease in viability of both cell types, but increased DNA and sulfated glycosaminoglycan (sGAG) contents of hMSCs-colonized scaffolds. Successful chondrogenesis of hMSC-colonized scaffolds was demonstrated by immunocytochemical staining of collagen type II, cartilage proteoglycans and the transcription factor SOX9. PLGA-infiltrated scaffolds showed a higher relative expression of cartilage related genes not only of pAC-, but also of hMSC-colonized scaffolds in comparison to the pure BG. Based on the novel data, our recommendation is BG scaffolds with single infiltrated PLGA for cartilage tissue engineering.
Collapse
|
10
|
Darie-Niță RN, Râpă M, Frąckowiak S. Special Features of Polyester-Based Materials for Medical Applications. Polymers (Basel) 2022; 14:polym14050951. [PMID: 35267774 PMCID: PMC8912343 DOI: 10.3390/polym14050951] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2022] [Revised: 02/18/2022] [Accepted: 02/24/2022] [Indexed: 11/16/2022] Open
Abstract
This article presents current possibilities of using polyester-based materials in hard and soft tissue engineering, wound dressings, surgical implants, vascular reconstructive surgery, ophthalmology, and other medical applications. The review summarizes the recent literature on the key features of processing methods and potential suitable combinations of polyester-based materials with improved physicochemical and biological properties that meet the specific requirements for selected medical fields. The polyester materials used in multiresistant infection prevention, including during the COVID-19 pandemic, as well as aspects covering environmental concerns, current risks and limitations, and potential future directions are also addressed. Depending on the different features of polyester types, as well as their specific medical applications, it can be generally estimated that 25–50% polyesters are used in the medical field, while an increase of at least 20% has been achieved since the COVID-19 pandemic started. The remaining percentage is provided by other types of natural or synthetic polymers; i.e., 25% polyolefins in personal protection equipment (PPE).
Collapse
Affiliation(s)
- Raluca Nicoleta Darie-Niță
- Physical Chemistry of Polymers Department, Petru Poni Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania;
| | - Maria Râpă
- Faculty of Materials Science and Engineering, University Politehnica of Bucharest, 313 Splaiul Independentei, 060042 Bucharest, Romania
- Correspondence:
| | - Stanisław Frąckowiak
- Faculty of Environmental Engineering, University of Science and Technology, 50-013 Wrocław, Poland;
| |
Collapse
|
11
|
Srithep Y, Akkaprasa T, Pholharn D, Morris J, Liu SJ, Patrojanasophon P, Ngawhirunpat T. Metronidazole-loaded polylactide stereocomplex electrospun nanofiber mats for treatment of periodontal disease. J Drug Deliv Sci Technol 2021. [DOI: 10.1016/j.jddst.2021.102582] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
12
|
Montemezzo M, Ferrari MD, Kerstner E, Santos VD, Victorazzi Lain V, Wollheim C, Frozza CODS, Roesch-Ely M, Baldo G, Brandalise RN. PHMB-loaded PDMS and its antimicrobial properties for biomedical applications. J Biomater Appl 2021; 36:252-263. [PMID: 33906516 DOI: 10.1177/08853282211011921] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Given the global panorama of demands in the health area, the development of biomaterials becomes irreducible for the maintenance and/or improvement in the quality of life of the human being. Aiming to reduce the impacts related to infections in the healing processes of the dermal structure, the present work proposes the development of polydimethylsiloxane (PDMS) based membranes with the incorporated polyhexamethylenebiguanide (PHMB) antimicrobial agent. In the present study, the antimicrobial and antibiofilm properties of polydimethylsiloxane (PDMS) films incorporated with 0.1, 0.3, and 0.5% (w/w) of polyhexamethylene biguanide (PHMB) were evaluated, aiming the development of a protective biomaterial that avoids cutaneous infections from the autochthonous and allochthonous microbiota. The disk diffusion of PHMB-loaded PDMS has shown the growth inhibition of Escherichia coli (ATCC 9637), Pseudomonas aeruginosa (ATCC 27953), Acinetobacter baumannii (ATCC 19606), Staphylococcus aureus (ATCC 6538), Staphylococcus epidermidis (ATCC 12228), Streptococcus pyogenes (ATCC 19615), Bacillus subtilis (ATCC 6633) and also yeast-like fungi Candida albicans, all microorganisms found on the epidermal surface. Likewise, the present study demonstrated low cytotoxicity of the PHMB-loaded PDMS on HaCaT and L929 cells at lower concentrations (0.1% w/w), indicating the possibility of using the developed material as a dressing for wounds, burns, and post-surgical procedures.
Collapse
Affiliation(s)
- Micael Montemezzo
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | - Micaela Dani Ferrari
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | - Estela Kerstner
- Rio Grande do Sul State Government, Porto Alegre, Rio Grande do Sul, Brazil
| | - Venina Dos Santos
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | - Vincius Victorazzi Lain
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | - Claudia Wollheim
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | | | - Mariana Roesch-Ely
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| | - Guilherme Baldo
- Federal University of Rio Grande do Sul, Porto Alegre, Brazil
| | - Rosmary Nichele Brandalise
- Laboratory of Polymers, Center for Exact Sciences and Technology, University of Caxias do Sul, Rio Grande do Sul, Brazil
| |
Collapse
|
13
|
Ren Q, Wu M, Li W, Zhu X, Zhao Y, Wang L, Zheng W. A green fabrication method of poly (lactic acid) perforated membrane via tuned crystallization and gas diffusion process. Int J Biol Macromol 2021; 182:1037-1046. [PMID: 33894256 DOI: 10.1016/j.ijbiomac.2021.04.105] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2021] [Revised: 04/09/2021] [Accepted: 04/17/2021] [Indexed: 11/15/2022]
Abstract
Poly (lactic acid) (PLA) perforated membrane is typically obtained through the solvent-volatilization-induced or non-solvent-induced phase separation (NIPS) method. However, the residual organic solvents would unavoidably limit the application of PLA perforated membrane in biomedical and high-end water purification fields. Herein, an innovative solution-free method was proposed for preparing the PLA perforated membrane via a simple and environmentally friendly way. We have successfully fabricated the PLA perforated membrane using a physical foaming technique with CO2 as the blowing agent. By tuning the primary film thickness, saturation pressure, and foaming temperature, PLA perforated membrane's cell morphology could be accordingly adjusted. The PLA perforated membrane with a highly-ordered straight pore channel and high open cell content (OCC) approximately 72% was obtained under a mild condition. The formation mechanism of the PLA perforated membrane was discussed via the interaction of crystallization behavior and gas diffusion process. This green and solvent-free PLA perforated membrane possesses great potential for use in areas like the tissue engineering and high-end water purification.
Collapse
Affiliation(s)
- Qian Ren
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Minghui Wu
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Wanwan Li
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang Province 315211, China
| | - Xiuyu Zhu
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang Province 315211, China
| | - Yongqing Zhao
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Long Wang
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China.
| | - Wenge Zheng
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China.
| |
Collapse
|
14
|
Seyedsalehi A, Daneshmandi L, Barajaa M, Riordan J, Laurencin CT. Fabrication and characterization of mechanically competent 3D printed polycaprolactone-reduced graphene oxide scaffolds. Sci Rep 2020; 10:22210. [PMID: 33335152 PMCID: PMC7747749 DOI: 10.1038/s41598-020-78977-w] [Citation(s) in RCA: 40] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2020] [Accepted: 11/18/2020] [Indexed: 12/15/2022] Open
Abstract
The ability to produce constructs with a high control over the bulk geometry and internal architecture has situated 3D printing as an attractive fabrication technique for scaffolds. Various designs and inks are actively investigated to prepare scaffolds for different tissues. In this work, we prepared 3D printed composite scaffolds comprising polycaprolactone (PCL) and various amounts of reduced graphene oxide (rGO) at 0.5, 1, and 3 wt.%. We employed a two-step fabrication process to ensure an even mixture and distribution of the rGO sheets within the PCL matrix. The inks were prepared by creating composite PCL-rGO films through solvent evaporation casting that were subsequently fed into the 3D printer for extrusion. The resultant scaffolds were seamlessly integrated, and 3D printed with high fidelity and consistency across all groups. This, together with the homogeneous dispersion of the rGO sheets within the polymer matrix, significantly improved the compressive strength and stiffness by 185% and 150%, respectively, at 0.5 wt.% rGO inclusion. The in vitro response of the scaffolds was assessed using human adipose-derived stem cells. All scaffolds were cytocompatible and supported cell growth and viability. These mechanically reinforced and biologically compatible 3D printed PCL-rGO scaffolds are a promising platform for regenerative engineering applications.
Collapse
Affiliation(s)
- Amir Seyedsalehi
- Connecticut Convergence Institute for Translation in Regenerative Engineering, UConn Health, 293 Farmington Avenue, Farmington, CT, 06030, USA
- Raymond and Beverly Sackler Center for Biomedical, Biological, Physical and Engineering Sciences, UConn Health, Farmington, CT, 06030, USA
- Department of Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA
- Department of Orthopaedic Surgery, UConn Health, Farmington, CT, 06030, USA
| | - Leila Daneshmandi
- Connecticut Convergence Institute for Translation in Regenerative Engineering, UConn Health, 293 Farmington Avenue, Farmington, CT, 06030, USA
- Raymond and Beverly Sackler Center for Biomedical, Biological, Physical and Engineering Sciences, UConn Health, Farmington, CT, 06030, USA
- Department of Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA
- Department of Orthopaedic Surgery, UConn Health, Farmington, CT, 06030, USA
| | - Mohammed Barajaa
- Connecticut Convergence Institute for Translation in Regenerative Engineering, UConn Health, 293 Farmington Avenue, Farmington, CT, 06030, USA
- Raymond and Beverly Sackler Center for Biomedical, Biological, Physical and Engineering Sciences, UConn Health, Farmington, CT, 06030, USA
- Department of Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA
- Department of Orthopaedic Surgery, UConn Health, Farmington, CT, 06030, USA
| | - John Riordan
- Connecticut Convergence Institute for Translation in Regenerative Engineering, UConn Health, 293 Farmington Avenue, Farmington, CT, 06030, USA
- Raymond and Beverly Sackler Center for Biomedical, Biological, Physical and Engineering Sciences, UConn Health, Farmington, CT, 06030, USA
- Department of Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA
| | - Cato T Laurencin
- Connecticut Convergence Institute for Translation in Regenerative Engineering, UConn Health, 293 Farmington Avenue, Farmington, CT, 06030, USA.
- Raymond and Beverly Sackler Center for Biomedical, Biological, Physical and Engineering Sciences, UConn Health, Farmington, CT, 06030, USA.
- Department of Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA.
- Department of Orthopaedic Surgery, UConn Health, Farmington, CT, 06030, USA.
- Institute of Materials Science, University of Connecticut, Storrs, CT, 06269, USA.
- Department of Materials Science and Engineering, University of Connecticut, Storrs, CT, 06269, USA.
- Department of Chemical and Biomolecular Engineering, University of Connecticut, Storrs, CT, 06269, USA.
| |
Collapse
|
15
|
Stereocomplex Crystallization in Asymmetric Diblock Copolymers Studied by Dynamic Monte Carlo Simulations. CHINESE JOURNAL OF POLYMER SCIENCE 2020. [DOI: 10.1007/s10118-021-2512-4] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
16
|
|
17
|
Luo F, Fortenberry A, Ren J, Qiang Z. Recent Progress in Enhancing Poly(Lactic Acid) Stereocomplex Formation for Material Property Improvement. Front Chem 2020; 8:688. [PMID: 32974273 PMCID: PMC7468453 DOI: 10.3389/fchem.2020.00688] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2020] [Accepted: 07/01/2020] [Indexed: 11/25/2022] Open
Abstract
The production and utilization of polymers have been widely implemented into diverse applications that benefit modern human society, but one of the most valuable properties of polymers, durability, has posed a long-standing environmental challenge from its inception since plastic waste can lead to significant contamination and remains in landfills and oceans for at least hundreds of years. Poly(lactic acid) (PLA) derived from renewable resources provides a sustainable alternative to traditional polymers due to its advantages of comparable mechanical properties with common plastics and biodegradability. However, the poor thermal and hydrolytic stability of PLA-based materials limit their potential for durable applications. Stereocomplex crystallization of enantiomeric poly (l-lactide) (PLLA) and poly (d-lactide) (PDLA) provides a robust approach to significantly enhance material properties such as stability and biocompatibility through strong intermolecular interactions between L-lactyl and D-lactyl units, which has been the key strategy to further PLA applications. This review focuses on discussing recent progress in the development of processing strategies for enhancing the formation of stereocomplexes within PLA materials, including thermal processing, additive manufacturing, and solution casting. The mechanism for enhancing SC formation and resulting material property improvement enabled by each method are also discussed. Finally, we also provide the perspectives on current challenges and opportunities for improving the understanding of processing-structure-property relationship in PLA materials that could be beneficial to their wide practical applications for a sustainable society.
Collapse
Affiliation(s)
- Fuhong Luo
- Department of Polymeric Materials, School of Materials Science and Engineering, Institute of Nano and Biopolymeric Materials, Tongji University, Shanghai, China
| | - Alexander Fortenberry
- School of Polymer Science and Engineering, The University of Southern Mississippi, Hattiesburg, MS, United States
| | - Jie Ren
- Department of Polymeric Materials, School of Materials Science and Engineering, Institute of Nano and Biopolymeric Materials, Tongji University, Shanghai, China
| | - Zhe Qiang
- School of Polymer Science and Engineering, The University of Southern Mississippi, Hattiesburg, MS, United States
| |
Collapse
|
18
|
Koyyada A, Orsu P. Recent Advancements and Associated Challenges of Scaffold Fabrication Techniques in Tissue Engineering Applications. REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE 2020. [DOI: 10.1007/s40883-020-00166-y] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
19
|
Maleki H, Semnani Rahbar R, Nazir A. Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous structures. IRANIAN POLYMER JOURNAL 2020. [DOI: 10.1007/s13726-020-00844-2] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
20
|
Zhao H, Zhang X, Zhou D, Weng Y, Qin W, Pan F, Lv S, Zhao X. Collagen, polycaprolactone and attapulgite composite scaffolds for in vivo bone repair in rabbit models. ACTA ACUST UNITED AC 2020; 15:045022. [PMID: 32224507 DOI: 10.1088/1748-605x/ab843f] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Although numerous materials have been explored as bone scaffolds, many of them are limited by their low osteoconductivity and high biodegradability. Therefore, new materials are desired to induce bone cell proliferation and facilitate bone formation. Attapulgite (ATP) is a hydrated silicate that exists in nature as a fibrillar clay mineral and is well known for its large specific surface area, high viscosity, and high absorption capacity, and therefore has the potential to be a new type of bone repair material due to its unique physicochemical properties. In this study, composite scaffolds composed of collagen/polycaprolactone/attapulgite (CPA) or collagen/polycaprolactone (CP) were fabricated through a salt-leaching method. The morphology, composition, microstructure, physical, and mechanical characteristics of the CPA and CP scaffolds were assessed. Cells from the mouse multipotent mesenchymal precursor cell line (D1 cells) were cocultured with the scaffolds, and cell adhesion, proliferation, and gene expression on the CPA and CP scaffolds were analyzed. Adult rabbits with radius defects were used to evaluate the performance of these scaffolds in repairing bone defects over 4-12 weeks. The experimental results showed that the cells demonstrated excellent attachment ability on the CPA scaffolds, as well as remarkable upregulation of the levels of osteoblastic markers such as Runx2, Osterix, collagen 1, osteopontin, and osteocalcin. Furthermore, results from radiography, micro-computed tomography, histological and immunohistochemical analysis demonstrated that abundant new bones were formed on the CPA scaffolds. Ultimately, these results demonstrated that CPA composite scaffolds show excellent potential in bone tissue engineering applications, with the capacity to be used as effective bone regeneration and repair scaffolds in clinical applications.
Collapse
Affiliation(s)
- Hongbin Zhao
- Medical Research Centre, Changzhou Second People's Hospital Affiliated to Nanjing Medical University, Changzhou 213164, People's Republic of China
| | | | | | | | | | | | | | | |
Collapse
|
21
|
Shi K, Ma Q, Su T, Wang Z. Preparation of porous materials by selective enzymatic degradation: effect of in vitro degradation and in vivo compatibility. Sci Rep 2020; 10:7031. [PMID: 32341461 PMCID: PMC7184588 DOI: 10.1038/s41598-020-63892-x] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2019] [Accepted: 04/07/2020] [Indexed: 11/28/2022] Open
Abstract
Poly(butylene succinate) (PBS) and poly(lactic acid) (PLA) were melt-blended and formed into a film by hot press forming. The film was selectively degraded by cutinase and proteinase K to form a porous material. The porous materials were characterized with respect to their pore morphology, pore size, porosity and hydrophilicity. The porous materials were investigated in vitro degradation and in vivo compatibility. The results show that the pore size of the prepared porous materials could be controlled by the proportion of PBS and the degradation time. When the PBS composition of PBS/PLA blends was changed from 40 wt% to 50 wt%, the mean pore diameter of the porous materials significantly increased from 6.91 µm to 120 µm, the porosity improved from 81.52% to 96.90%, and the contact angle decreased from 81.08° to 46.56°. In vitro degradation suggests that the PBS-based porous materials have a good corrosion resistance but the PLA-based porous materials have degradability in simulated body fluid. Subcutaneous implantation of the porous materials did not cause intense inflammatory response, which revealed good compatibility. The results of hematoxylin and eosin and Masson's trichrome staining assays demonstrated that the porous materials promote chondrocyte production. Porous materials have great potential in preparing implants for tissue engineering applications.
Collapse
Affiliation(s)
- Ke Shi
- College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun, 113001, China
| | - Qinqin Ma
- College of Life Sciences, Sichuan Normal University, Chengdu, 610101, China
| | - Tingting Su
- College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun, 113001, China.
| | - Zhanyong Wang
- College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun, 113001, China. .,Department of Microbiology, Cornell University, Ithaca, NY, 14853, USA.
| |
Collapse
|
22
|
Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2020; 110:110716. [PMID: 32204028 DOI: 10.1016/j.msec.2020.110716] [Citation(s) in RCA: 65] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2019] [Revised: 01/29/2020] [Accepted: 02/01/2020] [Indexed: 12/11/2022]
Abstract
Significant advances have been made in the field of tissue engineering (TE), especially in the synthesis of three-dimensional (3D) scaffolds for replacing damaged tissues and organs in laboratory conditions. However, the gaps in knowledge in exploiting these techniques in preclinical trials and beyond and, in particular, in practical scenarios (e.g., replacing real body organs) have not been discussed well in the existing literature. Furthermore, it is observed in the literature that while new techniques for the synthesis of 3D TE scaffold have been developed, some of the earlier techniques are still being used. This implies that the advantages offered by a more recent and advanced technique as compared to the earlier ones are not obvious, and these should be discussed in detail. For example, one needs to be aware of the reason, if any, behind the superiority of traditional electrospinning technique over recent advances in 3D printing technique for the production of 3D scaffolds given the popularity of the former over the latter, indicated by the number of publications in the respective areas. Keeping these points in mind, this review aims to demonstrate the ongoing trend in TE based on the scaffold fabrication techniques, focusing mostly, on the two most widely used techniques, namely, electrospinning and 3D printing, with a special emphasis on preclinical trials and beyond. In this context, the advantages, disadvantages, flexibilities and limitations of the relevant techniques (electrospinner and 3D printer) are discussed. The paper also critically analyzes the applicability, restrictions, and future demands of these techniques in TE including their applications in generating whole body organs. It is concluded that combining these knowledge gaps with the existing body of knowledge on the preparation of laboratory scale 3D scaffolds, would deliver a much better understanding in the future for scientists who are interested in these techniques.
Collapse
|
23
|
Yu M, Zheng Y, Tian J. Study on the biodegradability of modified starch/polylactic acid (PLA) composite materials. RSC Adv 2020; 10:26298-26307. [PMID: 35519735 PMCID: PMC9055409 DOI: 10.1039/d0ra00274g] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/10/2020] [Accepted: 04/08/2020] [Indexed: 12/05/2022] Open
Abstract
In this work, polylactic acid/thermoplastic acetylated starch (PLA/TPAS) composites were prepared using PLA as a matrix material and TPAS as a modifier. TPAS is based on acetylated starch, which is plasticized using glycerin. Analysis of the mechanical, thermal, and dynamic mechanical properties, and morphological structures of the PLA/TPAS composites shows that with an increase in the TPAS content, the toughness of the PLA/TPAS composites significantly improves. When the amount of TPAS added is 40% by weight, the elongation at break is increased 4 times. At the same time, the addition of TPAS has little effect on the thermal stability of the composites. Differential scanning calorimetry (DSC), dynamic mechanical analysis and scanning electron microscopy (SEM) analysis results show that PLA is incompatible with TPAS. The addition of TPAS promotes the crystallization of PLA, resulting in a decrease in the thermal stability but limits the degradation behavior during the processing of the material, which has little effect on the performance of the material. High temperature and high humidity soil degradation and ultraviolet radiation aging experiments on PLA/TPAS composites show that the PLA/TPAS composites have good biodegradability. In soil burial degradation experiments, the degradation rate of the pure PLA material is slow, and its final mass retention rate is high. The PLA/TPAS composites degrade fast. In ultraviolet radiation aging experiments, the tensile strength of the PLA/TPAS composites was improved to a certain extent after exposure to ultraviolet radiation. With an increase in the ultraviolet irradiation time, the tensile properties of the PLA/TPAS composites gradually decreased. In this work, polylactic acid/thermoplastic acetylated starch (PLA/TPAS) composites were prepared using PLA as a matrix material and TPAS as a modifier.![]()
Collapse
Affiliation(s)
- Meihong Yu
- College of Chemistry and Chemical Engineering
- Qiqihar University
- Qiqihar 161006
- China
| | - Yongjie Zheng
- College of Chemistry and Chemical Engineering
- Qiqihar University
- Qiqihar 161006
- China
| | - Jingzhi Tian
- College of Chemistry and Chemical Engineering
- Qiqihar University
- Qiqihar 161006
- China
| |
Collapse
|
24
|
Biodegradable Polylactide/TiO 2 Composite Fiber Scaffolds with Superhydrophobic and Superadhesive Porous Surfaces for Water Immobilization, Antibacterial Performance, and Deodorization. Polymers (Basel) 2019; 11:polym11111860. [PMID: 31718022 PMCID: PMC6918282 DOI: 10.3390/polym11111860] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2019] [Revised: 11/08/2019] [Accepted: 11/08/2019] [Indexed: 02/04/2023] Open
Abstract
In this short communication, TiO2-nanoparticle-functionalized biodegradable polylactide (PLA) nonwoven scaffolds with a superhydrophobic and superadhesive surface are reported regarding their water immobilization, antibacterial performance, and deodorization. With numerous regular oriented pores on their surface, the as-fabricated electrospun porous PLA/TiO2 composite fibers possessed diameters in the range from 5 µm down to 400 nm, and the lengths were even found to be up to the meters range. The PLA/TiO2 composite fiber surface was demonstrated to be both superhydrophobic and superadhesive. The size of the pores on the fiber surface was observed to have a length of 200 ± 100 nm and a width of 150 ± 50 nm using field-emission scanning electron microscopy and transmission electron microscopy. The powerful adhesive force of the PLA/TiO2 composite fibers toward water droplets was likely a result of van der Waals forces and accumulated negative pressure forces. Such a fascinating porous surface (functionalized with TiO2 nanoparticles) of the PLA/TiO2 composite fiber scaffold endowed it with multiple useful functions, including water immobilization, antibacterial performance, and deodorization.
Collapse
|
25
|
Sang Z, Ke K, Manas-Zloczower I. Design Strategy for Porous Composites Aimed at Pressure Sensor Application. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2019; 15:e1903487. [PMID: 31583819 DOI: 10.1002/smll.201903487] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2019] [Revised: 08/24/2019] [Indexed: 06/10/2023]
Abstract
Flexible and highly sensitive pressure sensors have versatile biomedical engineering applications for disease diagnosis and healthcare. The fabrication of such sensors based on porous structure composites usually requires complex, costly, and nonenvironmentally friendly procedures. As such, it is highly desired to develop facile, economical, and environment-friendly fabrication strategies for highly sensitive lightweight pressure sensors. Herein, a novel design strategy is reported to fabricate porous composite pressure sensors via a simple heat molding of conductive fillers and thermoplastic polyurethane (TPU) powders together with commercially available popcorn salts followed by water-assisted salt removal. The obtained TPU/carbon nanostructure (CNS) foam sensors have a linear resistance response up to 60% compressive strain with a gauge factor (GF ) of 1.5 and show reversible and reproducible piezoresistive properties due to the robust electrically conductive pathways formed on the foam struts. Such foam sensors can be potentially utilized for guiding squatting exercises and respiration rate monitoring in daily physical training.
Collapse
Affiliation(s)
- Zhen Sang
- Department of Macromolecular Science and Engineering, Case Western Reserve University, 2100 Adelbert Road, Cleveland, OH, 44106-7202, USA
| | - Kai Ke
- Department of Macromolecular Science and Engineering, Case Western Reserve University, 2100 Adelbert Road, Cleveland, OH, 44106-7202, USA
| | - Ica Manas-Zloczower
- Department of Macromolecular Science and Engineering, Case Western Reserve University, 2100 Adelbert Road, Cleveland, OH, 44106-7202, USA
| |
Collapse
|
26
|
Flexible and high heat-resistant stereocomplex PLLA-PEG-PLLA/PDLA blends prepared by melt process: effect of chain extension. JOURNAL OF POLYMER RESEARCH 2019. [DOI: 10.1007/s10965-019-1881-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/26/2022]
|
27
|
Zhao Y, Zhu B, Wang Y, Liu C, Shen C. Effect of different sterilization methods on the properties of commercial biodegradable polyesters for single-use, disposable medical devices. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 105:110041. [PMID: 31546462 DOI: 10.1016/j.msec.2019.110041] [Citation(s) in RCA: 37] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2019] [Revised: 07/11/2019] [Accepted: 07/30/2019] [Indexed: 11/18/2022]
Abstract
The increasing employment of non-degradable polymers based single-use, disposable medical devices have led to huge environmental pressure. Replacement of non-degradable polymers with biodegradable alternatives could be one solution. Since terminal sterilization is a necessary procedure for medical devices to eliminate infections, in this paper, the modifications of sterilization on the transparency, yellow index, dimensional stability and mechanical properties of commercial biodegradable poly(lactic acid) (PLA), poly(butylenes adipate-co-terephthalate) (PBAT) and their blends were investigated. The samples were prepared by compression molding and exposed to four sterilization treatments including ethylene oxide gas (EtO), saturated steam (SS), electron beam (EB), and hydrogen peroxide gas plasma (HPGP). It is concluded that EB can be applied for the sterilization of all the materials investigated, while SS and EtO are not recommended for PLA, and HPGP is not for PBAT and PLA/PBAT blends. This study demonstrates that, when a suitable sterilization process is chosen, PLA has potential to be used for transparent medical devices such as the barrel of syringes or microfluidic chips, while PBAT and PLA/PBAT blends for other non-transparent medical packaging applications.
Collapse
Affiliation(s)
- Yuping Zhao
- Key Laboratory of Materials Processing & Mold (Zhengzhou University), Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China; Center for Applied Polymer Research, Henan Tuoren Medical Device Co., Ltd., Weiyuan Industrial Park, Changyuan 453400, China
| | - Bo Zhu
- Key Laboratory of Materials Processing & Mold (Zhengzhou University), Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China
| | - Yaming Wang
- Key Laboratory of Materials Processing & Mold (Zhengzhou University), Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China.
| | - Chuntai Liu
- Key Laboratory of Materials Processing & Mold (Zhengzhou University), Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China.
| | - Changyu Shen
- Key Laboratory of Materials Processing & Mold (Zhengzhou University), Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China
| |
Collapse
|
28
|
Rheology of poly(lactic acid)/poly(trimethylene terephthalate) blends compatibilized by clay or maleic anhydride-grafted poly(ethylene-octene) elastomer. JOURNAL OF POLYMER ENGINEERING 2019. [DOI: 10.1515/polyeng-2018-0256] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
Blends of two biobased polymers, poly(lactic acid) and poly(trimethylene terephthalate) (PTT), were compatibilized with either maleic anhydride-grafted poly(ethylene-octene) (mPOE) or organically modified clay (Cloisite 30B). Dynamic rheological measurements revealed that the mPOE inclusion resulted in a four-fold increase in viscosity relative to the noncompatibilized blends. By loading 3 wt% Cloisite 30B, the storage moduli of the blends showed a distinct solid-like behavior and high complex viscosity in the low-frequency region, which can be interpreted by the reduced sizes of the PTT phase evidenced from the scanning electron microscopy (SEM) micrography. A temperature sweep of the viscosity of the blends starting from 180°C revealed that the existence of an unmelted PTT dispersed phase might impede the decline in viscosity with increasing temperature near the melting point of PTT. The introduced compatibilizers can restrict the temperature-dependent morphology evolution, and the use of the 3 wt% 30B clay can prohibit the morphology evolution during the temperature sweep.
Collapse
|
29
|
Improvement in Mechanical Properties and Heat Resistance of PLLA-b-PEG-b-PLLA by Melt Blending with PDLA-b-PEG-b-PDLA for Potential Use as High-Performance Bioplastics. ADVANCES IN POLYMER TECHNOLOGY 2019. [DOI: 10.1155/2019/8690650] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
Ecofriendly poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) (PLLA-b-PEG-b-PLLA) are flexible bioplastics. In this work, the blending of poly(D-lactide)-b-poly(ethylene glycol)-b-poly(D-lactide) (PDLA-b-PEG-b-PDLA) with various blend ratios for stereocomplex formation has been proved to be an effective method for improving the mechanical properties and heat resistance of PLLA-b-PEG-b-PLLA films. The PLLA-b-PEG-b-PLLA/PDLA-b-PEG-b-PLDA blend films were prepared by melt blending followed with compression molding. The stereocomplexation of PLLA and PDLA end-blocks were characterized by differential scanning calorimetry and X-ray diffraction (XRD). The content of stereocomplex crystallites of blend films increased with the PDLA-b-PEG-b-PDLA ratio. From XRD, the blend films exhibited only stereocomplex crystallites. The stress and strain at break of blend films obtained from tensile tests were enhanced by melt blending with the PDLA-b-PEG-b-PDLA. The heat resistance of blend films determined from testing of dimensional stability to heat and dynamic mechanical analysis were improved with the PDLA-b-PEG-b-PDLA ratio. The sterecomplex PLLA-b-PEG-b-PLLA/PDL-b-PEG-b-PDLA films prepared by melt processing could be used as flexible and good heat-resistance packaging bioplastics.
Collapse
|
30
|
Ji N, Hu G, Li J, Ren J. Influence of poly(lactide) stereocomplexes as nucleating agents on the crystallization behavior of poly(lactide)s. RSC Adv 2019; 9:6221-6227. [PMID: 35517274 PMCID: PMC9060946 DOI: 10.1039/c8ra09856e] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2018] [Accepted: 02/11/2019] [Indexed: 12/19/2022] Open
Abstract
The influence of the addition of linear and four-arm poly(lactide) stereocomplexes on the crystallization behavior of poly(l-lactide) and poly(d-lactide) from the molten state was investigated.
Collapse
Affiliation(s)
- Nuo Ji
- Institute of Nano and Bio-Polymeric Materials
- School of Material Science and Engineering
- Tongji University
- Shanghai 201804
- China
| | - Guang Hu
- Institute of Nano and Bio-Polymeric Materials
- School of Material Science and Engineering
- Tongji University
- Shanghai 201804
- China
| | - Jianbo Li
- Institute of Nano and Bio-Polymeric Materials
- School of Material Science and Engineering
- Tongji University
- Shanghai 201804
- China
| | - Jie Ren
- Institute of Nano and Bio-Polymeric Materials
- School of Material Science and Engineering
- Tongji University
- Shanghai 201804
- China
| |
Collapse
|
31
|
Yang B, Wang R, Ma HL, Li X, Brünig H, Dong Z, Qi Y, Zhang X. Structure Mediation and Properties of Poly( l-lactide)/Poly( d-lactide) Blend Fibers. Polymers (Basel) 2018; 10:E1353. [PMID: 30961279 PMCID: PMC6401892 DOI: 10.3390/polym10121353] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2018] [Revised: 11/30/2018] [Accepted: 12/01/2018] [Indexed: 12/02/2022] Open
Abstract
Poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) blend as-spun fibers (50/50, wt.%) were prepared by melt spinning. Structure mediation under temperature and stress and properties of poly(l-lactic acid)/poly(d-lactic acid)(PLLA/PDLA) as-spun fibers were investigated by wide-angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC). The results show that highly oriented stereocomplex (SC) crystals can be formed in PLLA/PDLA blend fibers drawn at 60 °C and annealed at 200 °C. However, at drawn temperature of 80 °C, only lower oriented SC crystals can be formed. For PLLA/PDLA blend fibers drawn twice at 60 °C (PLLA/PDLA-60-2), the crystallinity of SC crystals increases with annealing temperature in the range of 200 to 215 °C, while the degree of orientation decreases slightly. When the annealing temperature is 210 °C, the crystallinity and orientation of SC crystals in PLLA/PDLA-60-2 fibers reach 51% and -0.39, respectively. Moreover, PLLA/PDLA-60-2-210 fibers exhibit excellent heat-resistant property even at 200 °C. The results indicate that the oriented PLLA/PDLA blend fibers with high SC crystals content can be regulated in a short time.
Collapse
Affiliation(s)
- Bo Yang
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Rui Wang
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Hui-Ling Ma
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Xiaolu Li
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Harald Brünig
- Leibniz Institute of Polymer Research Dresden, Hohe Strasse 6, 01069 Dresden, Germany.
| | - Zhenfeng Dong
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Yue Qi
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| | - Xiuqin Zhang
- Beijing Key Laboratory of Clothing Materials R & D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science & Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China.
| |
Collapse
|
32
|
Preparation and Properties of sc-PLA/PMMA Transparent Nanofiber Air Filter. Polymers (Basel) 2018; 10:polym10090996. [PMID: 30960920 PMCID: PMC6403596 DOI: 10.3390/polym10090996] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2018] [Revised: 09/04/2018] [Accepted: 09/04/2018] [Indexed: 12/25/2022] Open
Abstract
Particulate matter (PM) pollution is a serious concern for the environment and public health. To protect indoor air quality, nanofiber filters have been used to coat window screens due to their high PM removal efficiency, transparency and low air resistance. However, these materials have poor mechanical property. In this study, electrostatic induction-assisted solution blowing was used to fabricate polylactide stereocomplex (sc-PLA), which served as reinforcement to enhance the physical cross-linking point to significantly restrict poly(methyl methacrylate) (PMMA) molecular chain motion and improve the mechanical properties of sc-PLA/PMMA nanofibers. Moreover, the introduction of sc-PLA led to the formation of thick/thin composite nanofiber structure, which is beneficial for the mechanical property. Thus, sc-PLA/PMMA air filters of ~83% transparency with 99.5% PM2.5 removal and 140% increase in mechanical properties were achieved when 5 wt % sc-PLA was added to PMMA. Hence, the addition of sc-PLA to transparent filters can effectively improve their performance.
Collapse
|
33
|
Hsiao SH, Hsu SH. Synthesis and Characterization of Dual Stimuli-Sensitive Biodegradable Polyurethane Soft Hydrogels for 3D Cell-Laden Bioprinting. ACS APPLIED MATERIALS & INTERFACES 2018; 10:29273-29287. [PMID: 30133249 DOI: 10.1021/acsami.8b08362] [Citation(s) in RCA: 53] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Three-dimensional bioprinting serves as an attractive platform to fabricate customized tissue-engineered substitutes from biomaterials and cells for the repair or replacement of injured tissues and organs. A common challenge for 3D bioprinting materials is that the structures printed from the biodegradable polymer hydrogels tend to collapse because of the poor mechanical stability. In this study, dual stimuli-responsive biodegradable polyurethane (PU) dispersions (PUA2 and PUA3) were synthesized from an eco-friendly waterborne process. Acrylate group was introduced in the PU chain end to serve as a photosensitive moiety for UV-induced cross-linking and improvement of the printability, while mixed oligodiols in the soft segment remained to be the thermosensitive moiety. The photo/thermal-induced morphological changes of PU nanoparticles were verified by dynamic light scattering, small-angle X-ray scattering, and rheological measurement of the dispersions. It was observed that these PU nanoparticles became more rod-like in shape after UV treatment and formed compact packing structures upon further heating. With the thermosensitive properties, these UV-cured PU dispersions underwent rapid thermal gelation with gel moduli in the range 0.5-2 kPa near body temperature. The rheological properties of the PU hydrogels including dynamic viscoelasticity, creep recovery, and shear thinning behavior at 37 °C were favorable for processing by microextrusion-based 3D printing and could be easily mixed with cells before printing to produce cell-laden constructs. The dual-responsive hydrogel constructs demonstrated higher resolution and shape fidelity as well as better cell viability and proliferation than the thermoresponsive control. Moreover, the softer hydrogel (PUA3) with a low modulus (<1 kPa) could offer neural stem cells a tofu-like, stable, and inductive 3D microenvironment to proliferate and differentiate. We expect that the photo/thermoresponsive biodegradable polyurethane ink may offer unique rheological properties to contribute toward the custom-made bioprinting of soft tissues.
Collapse
Affiliation(s)
- Shih-Hsiang Hsiao
- Institute of Polymer Science and Engineering , National Taiwan University , Number 1 Section 4 Roosevelt Road , Taipei , 10617 Taiwan , Republic of China
| | - Shan-Hui Hsu
- Institute of Polymer Science and Engineering , National Taiwan University , Number 1 Section 4 Roosevelt Road , Taipei , 10617 Taiwan , Republic of China
- Institute of Cellular and System Medicine , National Health Research Institutes , Number 35 Keyan Road , Miaoli , 35053 Taiwan , Republic of China
| |
Collapse
|