Influence of Mg doping on the structural, morphological, optical, thermal, and visible-light responsive antibacterial properties of ZnO nanoparticles synthesized via co-precipitation

Advancements in photodynamic inactivation: A comprehensive review of photosensitizers, mechanisms, and applications in food area

Food microbial contamination results in serious food safety issues and numerous food loss and waste, presenting one of the most significant challenges facing the global food system. Photodynamic inactivation (PDI) technology, which combines light and photosensitizers (PS) to provide antimicrobial effects, is an ideal nonthermal antimicrobial technique for the food industry. This review provides a comprehensive overview of PDI technology, beginning with the fundamental photoactivation principles of PS and the pathways of photoinduced reactive oxygen species (ROS) generation. PS is the most critical factor affecting PDI efficiency, which is categorized into three types: organic, metal oxide-, and carbon-based. This review systemically summarizes the photophysical properties, in vitro PDI performances, potential enhancement strategies, and the advantages and limitations of each type of PS. Furthermore, the antimicrobial mechanisms of the PDI technologies are analyzed at both microscopic and molecular levels. Finally, the current applications of PDI in various food systems are discussed, along with the associated challenges and opportunities. Overall, this review offers crucial insights into optimizing and advancing PDI technology, highlighting key challenges and suggesting future research directions to enhance the effectiveness and scalability of PDI for diverse food applications.

Modulation of dielectric and antibacterial properties of Zn0.5Mn0.5O nanoparticles by post growth annealing method

In this manuscript, we have investigated the dielectric and antibacterial potential of hydrothermally synthesized ZnMnO nanoparticles. The synthesized nanoparticles were annealed at various temperatures ranging from 450 to 650 °C with a step of 50 °C to modulate the structural, vibrational, dielectric, and antibacterial properties. XRD data confirmed the hexagonal structure of the synthesized samples and crystalline size was decreased to 4.8 nm at annealing temperature 600 °C. The lattice structure was further verified by Raman spectroscopy measurements, which strongly verified the XRD data due the presence of ZnMnO vibrational modes. The dielectric measurements revealed that the dielectric constant and los tangent were found to be increased with the increase annealing temperature and decreased with frequency, while a.c conductivity has an increasing trend with both parameters (temperature and frequency). The plot of real and complex parts of impedance against frequency demonstrated that both parameters decrease with the increased in frequency. But when we analyzed the behavior of the real part of impedance against the annealing temperature, a degradation in real part behavior is observed. The antibacterial activity of ZnMnO nanoparticles was determined by using the disc diffusion method against E. coli bacteria, which was grown on a Petri dish at room temperature for 24 h. This observation revealed that the samples annealed at 450 °C and 550 °C show remarkable antibacterial sensitivity as compared to other samples. It is concluded that crystalline size of 20 nm is found to be optimal value for good anti-baterial behavior.

Seaweed biomass as a sustainable resource for synthesis of ZnO nanoparticles using Sargassum wightii ethanol extract and their environmental and biomedical applications through Gaussian mixture model

Zinc oxide nanoparticles (ZnO) possess unique features that mak them a common matter among different industries. Nevertheless, traditional models of synthesizing ZnO-NPs are related with health and environmental and risks due to harmful chemicals. The biosynthesis of zinc oxide nanoparticles was achieved using the hot water extract of Sargassum wightii (SW), which serves as a reducing agent. This extract is mixed with zinc precursors, initiating a bio-reduction process. UV-vis, FTIR, XRD, Raman, DLS, SEM, EDX, TEM imaging, and XPS analysis are used. The novelty of this research lies in utilizing a bio-reduction process involving hot water extract of SW to synthesize zinc oxide nanoparticles, providing a safer and eco-friendly alternative to traditional chemical methods. Here, the zinc oxide nanoparticles produced through the biosynthesis process effectively addressed oral infections (Streptococcus mutans) due to their ability to disrupt the integrity of bacterial cell membranes, interfere with cellular processes, and inhibit the growth and proliferation of bacteria responsible for oral infections. Gaussian Mixture Models (GMMs) uncover intricate patterns within medical data, enabling enhanced diagnostics, treatment personalization, and patient outcomes. This study aims to apply Gaussian Mixture Models (GMMs) to medical data for subpopulation identification and disease subtyping, contributing to personalized treatment strategies and improved patient care. With a dataset comprising 300 samples, the application of GMM showed lower BIC and AIC values (2500, 3200), a high Silhouette Score (0.65 from -1 to 1) reflecting well-defined clusters, Calinski-Harabasz (120) and Davies-Bouldin Indices (0.45). These metrics collectively underscored the model's success in revealing distinct patterns within the data. ZnO-nanocoated aligners were effective against Streptococcus mutans, with the maximum antibacterial effect observed for 2 days and lasting for 7 days.

Tissue engineered periosteum: Fabrication of a gelatin basedtrilayer composite scaffold with biomimetic properties for enhanced bone healing

The periosteum, a vascularized tissue membrane, is essential in bone regeneration following fractures and bone loss due to some other reasons, yet there exist several research gaps concerning its regeneration. These gaps encompass reduced cellular proliferation and bioactivity, potential toxicity, heightened stiffness of scaffold materials, unfavorable porosity, expensive materials and procedures, and suboptimal survivability or inappropriate degradation rates of the implanted materials. This research used an interdisciplinary approach by forming a new material fabricated through electrospinning for the proposed application as a layer-by-layer tissue-engineered periosteum (TEP). TEP comprises poly(ε-caprolactone) (PCL), PCL/gelatin/magnesium-doped zinc oxide (vascular layer), and gelatin/bioactive glass/COD liver oil (osteoconductive layer). These materials were selected for their diverse properties, when integrated into the scaffold formation, successfully mimic the characteristics of native periosteum. Scanning electron microscopy (SEM) was employed to confirm the trilayer structure of the scaffold and determine the average fiber diameter. In-vitro degradation and swelling studies demonstrated a uniform degradation rate that matches the typical recovery time of periosteum. The scaffold exhibited excellent mechanical properties comparable to natural periosteum. Furthermore, the sustained release kinetics of COD liver oil were observed in the trilayer scaffold. Cell culture results indicated that the three-dimensional topography of the scaffold promoted cell growth, proliferation, and attachment, confirming its non-toxicity, biocompatibility, and bioactivity. This study suggests that the fabricated scaffold holds promise as a potential artificial periosteum for treating periostitis and bone fractures.

Photocatalytic and Antimicrobial Properties of ZnO and Mg-Doped ZnO Nanoparticles Synthesized Using Lupinus albus Leaf Extract

Dye effluents discharged from various industries contribute to environmental contamination, making their treatment highly necessary. Infectious diseases also pose a threat to public health worldwide. Nanomaterials have promising features and are potential candidates for overcoming the problems of drug resistance in microbes and environmental pollution. Therefore, this study aimed to synthesize zinc oxide (ZnO) and magnesium-doped zinc oxide (Mg-doped ZnO) nanoparticles (NPs) using the plant extract of Lupinus albus for applications in photocatalysis and antimicrobial activity. A sample of Lupinus albus leaves was collected from Motta, in the eastern Gojjam zone of Ethiopia. The leaves were air-dried and then ground into a powder. The powdered plant material was extracted using distilled water. The ZnO and Mg-doped ZnO NPs were synthesized using 0.1 M Zn(NO3)2·6H2O, 7.5% 0.1 M Mg(NO3)2.6H2O, and 10 mL of the leaf extract. The nanoparticles (NPs) were characterized using UV-vis, FT-IR, XRD, and SEM. The average crystallite sizes of ZnO and Mg-doped ZnO NPs were determined using the Debye-Scherrer formula and were found to be 28.1 and 34.4 nm, respectively. The antimicrobial activity of the synthesized NPs was evaluated against four bacterial strains (Escherichia coli, Bacillus cereus, Salmonella typhi, and Staphylococcus aureus) and one fungal strain (Candida albicans) by using the agar disk diffusion method. The Mg-doped ZnO NPs exhibited significant antimicrobial activity, with a maximum zone of inhibition measuring 24 and 22 mm against Escherichia coli and Salmonella typhi, respectively. The photocatalytic activity of ZnO and Mg-doped ZnO NPs was investigated by studying the degradation of methylene blue (MB) dye under sunlight irradiation for 120 min. The results showed that Mg-doped ZnO NPs exhibited higher photocatalytic activity (99.6%) than ZnO NPs (94.1%). In conclusion, the synthesized NPs could serve as viable alternatives for antimicrobial drugs and photocatalysts to mitigate the pollution of the environment caused by organic dyes.

Zinc Oxide and Magnesium-Doped Zinc Oxide Nanoparticles Ameliorate Murine Chronic Toxoplasmosis

Toxoplasma gondii causes a global parasitic disease. Therapeutic options for eradicating toxoplasmosis are limited. In this study, ZnO and Mg-doped ZnO NPs were prepared, and their structural and morphological chrematistics were investigated. The XRD pattern revealed that Mg-doped ZnO NPs have weak crystallinity and a small crystallite size. FTIR and XPS analyses confirmed the integration of Mg ions into the ZnO framework, producing the high-purity Mg-doped ZnO nanocomposite. TEM micrographs determined the particle size of un-doped ZnO in the range of 29 nm, reduced to 23 nm with Mg2+ replacements. ZnO and Mg-doped ZnO NPs significantly decreased the number of brain cysts (p < 0.05) by 29.30% and 35.08%, respectively, compared to the infected untreated group. The administration of ZnO and Mg-doped ZnO NPs revealed a marked histopathological improvement in the brain, liver, and spleen. Furthermore, ZnO and Mg-doped ZnO NPs reduced P53 expression in the cerebral tissue while inducing CD31 expression, which indicated a protective effect against the infection-induced apoptosis and the restoration of balance between free radicals and antioxidant defense activity. In conclusion, the study proved these nanoparticles have antiparasitic, antiapoptotic, and angiogenetic effects. Being nontoxic compounds, these nanoparticles could be promising adjuvants in treating chronic toxoplasmosis.

Efficient photocatalytic degradation of industrial contaminants by Piper longum mediated ZnO nanoparticles

Piper longum extract as a reducing agent in green synthesis method is used to synthesize ZnO nanoparticles (ZnO-NPs). The impact of the reductant on the structural, optical and surface morphological properties of ZnO-NPs can be analyzed. Piper longum extract has delicately tuned the band gap of ZnO-NPs. Increase in energy band gap indicates an increase in the number of capping molecules in the prepared ZnO nanoparticles. The carbohydrates and proteins not only play a fundamental role in ZnO capping, which is important for its stability, determination and biocompatibility. Thus obtained nanosized ZnO particles are confirmed by the surface morphological studies. Because of various surface interface properties might have different physical-chemical, desorption-adsorption abilities in the direction towards microbes, create different antibacterial performances. S.aureus has maximum inhibition zone of 23 mm and Escherichia coli has minimum inhibition zone of 7 mm. To assess the photocatalytic activity of the prepared ZnO-NPs under UV light irradiation, methyl orange, malachite green and methylene blue dyes were utilized as model contaminants. The degradation efficiency of MG, MB and MO dyes solution is found that 96%, 69% and 48% of degradation efficiency respectively under ultraviolet light irradiation. The properties of synthetic nanopowders suggest that they have important potential for a variety of biochemical and environmental applications.

Biocidal and biocompatible hybrid nanomaterials from biomolecule chitosan, alginate and ZnO

Biocidal activity and biocompatibility of nanomaterials (NMs) are crucial for healthcare applications. This study aims to develop biocidal hybrid NMs with high inhibition rates to control multidrug-resistant bacterial infection compared to conventional antibiotics. Herein, ZnO, chitosan-ZnO (CZnO) and alginate-ZnO (AZnO) NMs were synthesized via a simple one-pot technique. The one-pot process facilitates the efficiency of a chemical reaction whereby a reactant is subjected to successive chemical reactions in just one step. The resulted NMs bio-physicochemical features were analyzed using various analytical methods. The bactericidal and bacteriostatic mechanism of NMs strongly depends on the production of reactive oxygen species in NMs, due to their size, large surface areas, oxygen vacancies, ion release, and diffusion ability. The antibacterial potential of the NMs was tested against methicillin-resistant Staphylococcus aureus. The inhibition zone disclosed that the AZnO possessed an excellent antibacterial activity compared to ZnO and CZnO. Furthermore, toxicity studies revealed that the AZnO demonstrated low toxicity to the HepG2 cell lines. These results confirmed that the AZnO hybrid nanomaterials are promising futuristic biocidal agents suitable for the clinical and healthcare industries.

Effect of Mg doping on ZnO fabricated using aqueous leaf extract of Ziziphus mauritiana Lam. for antioxidant and antibacterial studies

Aqueous leaf extract of Ziziphus mauritiana Lam. was successfully used to synthesize zinc oxide (ZnO) and magnesium-doped ZnO (Mg-doped ZnO) particles and acted as capping and stabilizing agent. UV-Vis diffuse reflectance spectra showed that optical band gap energy of ZnO has narrowed from 3.11 to 3.08 eV and 3.03 eV when doped with 1% Mg and 5% Mg, respectively. Powder X-ray diffraction and X-ray photoelectron spectroscopy studies confirmed the purity and crystalline nature of the synthesized materials. FT-IR spectroscopy revealed the presence of phytochemicals coated on the surface of synthesized materials. The synthesized materials were found to effectively scavenge DPPH radicals in the presence of visible light in comparison to the dark. The antibacterial properties of the synthesized materials were evaluated against Staphylococcus aureus and Escherichia coli. The obtained results revealed that Staphylococcus aureus seemed to be more sensitive to the green synthesized ZnO and Mg-doped ZnO than Escherichia coli.

Green synthesis of ZnO nanoparticles for antimicrobial and vegetative growth applications: A novel approach for advancing efficient high quality health care to human wellbeing

The present work aims to synthesize zinc oxide (ZnO) nanoparticles via green approaches using leaf extract of Parthenium hysterophorus. UV-vis and FT-IR tests confirmed the existence of biomolecules, active materials, and metal oxides. The X-ray diffraction structural study exposes the ZnO nanoparticles formation with hexagonal phase structures. SEM and TEM analysis reveal surface morphologies of ZnO nanoparticles and most of them are spherical with a size range of 10 nm. ZnO nanoparticles were revealed strong antimicrobial activity against both bacterial and fungal strains. The germination of seeds and vegetative growth of Sesamum indicum has been greatly improved.

Facile synthesis of gold and platinum doped titanium oxide nanoparticles for antibacterial and photocatalytic activity: A photodynamic approach

A simple method has been needed to synthesize nanoparticles (NPs) to avoid environmental pollution, an alternative chemical and physical method. This current study deals with phytosynthesis of gold (Au) and platinum (Pt) metal doped with titanium oxide (TiO₂) NPs using Enterolobium saman bark extract. This extract plays a vital role in reducing and stabilizing Au and Pt doped into the TiO₂ NPs lattices. Phytosynthesized samples were characterized by XRD, SEM, ED-XRF, TEM, FTIR, Raman, and UV-vis-DRS analyses. The metal doping effect has decreased bandgap energy and particle size, whereas increased conductivity for TiO₂/M-Au and TiO₂/M-Pt NPs compared to pristine TiO₂ NPs. Phytosynthesized NPs were fabricated for dye-sensitized solar cell (DSSC) and photocatalytic behaviour against methylene blue (MB) dye was studied. An obtained result demonstrates that TiO₂/M-Au NPs have excellent feasibility for applying DSSC and photocatalytic application due to particle size, crystallite size, absorption ability, and bandgap energy. Besides, synthesized samples were measured with cyclic voltammetry and impedance spectroscopy found that the metal doping is drifted the dielectric and increases that the metal doping is drifted the dielectric increases electro-catalytic of the TiO₂. Different concentrations of all NPs were tested against Escherichia coli MTCC 40 and S. aureus ATCC 6633 bacteria by a well-diffusion method. The 10 mg concentration of all NPs showed better antibacterial activity. However, we believe that the proposed simple phytosynthesized method provides an efficient way to overcome the chemical and physical methods.

Recent Advances in Zinc Oxide Nanostructures with Antimicrobial Activities

This article reviews the recent developments in the synthesis, antibacterial activity, and visible-light photocatalytic bacterial inactivation of nano-zinc oxide. Polycrystalline wurtzite ZnO nanostructures with a hexagonal lattice having different shapes can be synthesized by means of vapor-, liquid-, and solid-phase processing techniques. Among these, ZnO hierarchical nanostructures prepared from the liquid phase route are commonly used for antimicrobial activity. In particular, plant extract-mediated biosynthesis is a single step process for preparing nano-ZnO without using surfactants and toxic chemicals. The phytochemical molecules of natural plant extracts are attractive agents for reducing and stabilizing zinc ions of zinc salt precursors to form green ZnO nanostructures. The peel extracts of certain citrus fruits like grapefruits, lemons and oranges, acting as excellent chelating agents for zinc ions. Furthermore, phytochemicals of the plant extracts capped on ZnO nanomaterials are very effective for killing various bacterial strains, leading to low minimum inhibitory concentration (MIC) values. Bioactive phytocompounds from green ZnO also inhibit hemolysis of Staphylococcus aureus infected red blood cells and inflammatory activity of mammalian immune system. In general, three mechanisms have been adopted to explain bactericidal activity of ZnO nanomaterials, including direct contact killing, reactive oxygen species (ROS) production, and released zinc ion inactivation. These toxic effects lead to the destruction of bacterial membrane, denaturation of enzyme, inhibition of cellular respiration and deoxyribonucleic acid replication, causing leakage of the cytoplasmic content and eventual cell death. Meanwhile, antimicrobial activity of doped and modified ZnO nanomaterials under visible light can be attributed to photogeneration of ROS on their surfaces. Thus particular attention is paid to the design and synthesis of visible light-activated ZnO photocatalysts with antibacterial properties.

Biosynthesized Fe- and Ag-doped ZnO nanoparticles using aqueous extract of Clitoria ternatea Linn for enhancement of sonocatalytic degradation of Congo red

Nowadays, the current synthesis techniques used in industrial production of nanoparticles have been generally regarded as nonenvironmentally friendly. Consequently, the biosynthesis approach has been proposed as an alternative to reduce the usage of hazardous chemical compounds and harsh reaction conditions in the production of nanoparticles. In this work, pure, iron (Fe)-doped and silver (Ag)-doped zinc oxide (ZnO) nanoparticles were successfully synthesized through the green route using Clitoria ternatea Linn. The optical, chemical, and physical properties of the biosynthesized ZnO nanoparticles were then analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), UV-Vis diffuse reflectance spectroscopy (DRS), zeta potential measurement, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and surface analysis. The biosynthesized ZnO nanoparticles were crystallized with a hexagonal wurtzite structure and possessed smaller particle sizes than those of commercially or chemically produced samples. The existence of biomolecules to act as reducing and stabilizing agents from C. ternatea Linn aqueous extract was confirmed using FTIR analysis. The biosynthesized ZnO nanoparticles mainly comprised of negatively charged groups and responsible for moderately stable dispersion of the nanoparticles. All these properties were favorable for the sonocatalytic degradation of Congo red. Sonocatalytic activity of ZnO nanoparticles was studied through the degradation of 10 mg/L Congo red using ultrasonic irradiation at 45 kHz and 80 W. The results showed that the sonocatalytic degradation efficiency of Congo red in the presence of biosynthesized ZnO nanoparticles prepared at 50 °C for 1 h could achieve 88.76% after 1 h. The sonocatalytic degradation efficiency of Congo red in the presence of Ag-doped ZnO was accelerated to 94.42% after 10 min which might be related to the smallest band gap energy (3.02 eV) and the highest specific surface area (10.31 m²/g) as well as pore volume (0.0781 cm³/g). Lastly, the biosynthesized ZnO nanoparticles especially Ag-doped ZnO offered significant antibacterial potential against Escherichia coli which indicated its ability to inhibit the normal growth and replication of bacterial cells. These results affirmed that the biosynthesized ZnO nanoparticles could be used as an alternative to the current chemical compounds and showed a superior sonocatalytic activity toward degradation of Congo red.

Photocatalytic efficacy of supported tetrazine on MgZnO nanoparticles for the heterogeneous photodegradation of methylene blue and ciprofloxacin

MgZnO@SiO₂-tetrazine nanoparticles were synthesized and their photocatalytic efficiency was demonstrated in the decomposition of ciprofloxacin and methylene blue (MB). This new heterogeneous nanocatalyst was characterized by FT-IR, XRD, UV-vis, DRS, FE-SEM, ICP, and CHN. Distinctive variables including photocatalyst dose, pH, and degradation time were investigated. Up to 95% photodegradation was gained under the optimum conditions (20 mg photocatalyst, 3.5 ppm MB, pH 9) by using MgZnO@SiO₂-tetrazine nanoparticles after 20 min. An elementary kinetic study was carried out, and a pseudo-first-order kinetic with a reasonably high rate-constant (0.068 min⁻¹) was derived for the MB decay. Photoluminescence (PL) studies confirmed that the photocatalytic activity of MgZnO@SiO₂-tetrazine was almost consistent with the Taugh plots. Thus, it can be envisaged that the photocatalytic activity is closely related to the optical absorption. Furthermore, a photoreduction mechanism was suggested for the degradation process. Addition of scavengers and some mechanistic studies also revealed that O₂˙⁻ is the original radical accounting for the degradation of MB, considering this latter compound as a model type pollutant. Finally, efficacy of the present photocatalytic process was assessed in the degradation of ciprofloxacin as a model drug under the optimum reaction conditions.

MgZnO@SiO₂-tetrazine nanoparticle was synthesized and its photocatalytic efficiency was demonstrated in the decomposition of methylene blue (MB) and ciprofloxacin.