Enhancing osteogenic differentiation of BMSCs on high magnetoelectric response films

Advances in magnetoelectric composites for promoting bone regeneration: a review

Repair of large bone defects is one of the clinical problems that have not yet been fully solved. The dynamic balance of bone tissue is regulated by many biological, chemical and physical environmental factors. Simulating the microenvironment of bone tissue in the physiological state through biomimetic materials is an important development direction of tissue engineering in recent years. With the deepening of research, it has been found that when bone tissue is damaged, its surrounding magnetoelectric microenvironment is subsequently destroyed, and providing a magnetoelectric microenvironment in the biomimetic state will be beneficial to promote bone repair. This review describes the piezoelectric effect of natural bone tissue with magnetoelectric stimulation for bone regeneration, provides a detailed account of the historical development of magnetoelectric composites and the current magnetoelectric composites that are most commonly utilized in the field of tissue engineering. Besides, the hypothesized mechanistic pathways through which magnetoelectric composite materials promote bone regeneration are critically examined, including the enhancement of osteogenesis, promotion of cell adhesion and angiogenesis, modulation of bone immunity, and promotion of nerve regeneration.

Accelerated Bone Regeneration on the Metal Surface through Controllable Surface Potential

Surface potential is rarely investigated as an independent factor in influencing tissue regeneration on the metal surface. In this work, the surface potential on the titanium (Ti) surface was designed to be tailored and adjusted independently, which arises from the ferroelectricity and piezoelectricity of poled poly(vinylidene fluoride-trifluoroethylene) (PVTF). Notably, it is found that such controllable surface potential on the metal surface significantly promotes osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro as well as bone regeneration in vivo. In addition, the intracellular calcium ion (Ca2+) concentration measurement further proves that such controllable surface potential on the metal surface could activate the transmembrane calcium channels and allow the influx of extracellular Ca2+ into the cytoplasm. That might be the reason for improved osteogenic differentiation of BMSCs and bone regeneration. These findings reveal the potential of the metal surface with improved bioactivity for stimulation of osteogenesis and show great prospects for fabricable implantable medical devices with adjustable surface potential.

Magneto-mechanical stimulation modulates osteocyte fate via the ECM-integrin-CSK axis and wnt pathway

Osteocytes are the mechano-sensors of bones. Large gradient high-static magnetic fields (LG-HMFs) produce stable, high-precision, and non-attenuation mechanical forces. We discovered that magnetic forces opposite to gravity inhibited MLO-Y4 osteocyte proliferation and viability by inducing structural damage and apoptosis. In contrast, magnetic force loading in the same direction as that of gravity promoted the proliferation and inhibited apoptosis of MLO-Y4 osteocytes. Differentially expressed gene (DEG) analysis after magnetic force stimulation indicated that the ECM-integrin-CSK axis responded most significantly to mechanical signals. Wisp2 was the most significant DEG between the 12 T upward and downward groups, showing the highest correlation with the Wnt pathway according to the STRING protein interaction database. Explaining the cellular and molecular mechanisms by which mechanical stimuli influence bone remodeling is currently the focus of osteocyte-related research. Our findings provide insights into the effects of LG-HMFs on bone cells, which have further implications in clinical practice.

Mitochondria transfer reverses the inhibitory effects of low stiffness on osteogenic differentiation of human mesenchymal stem cells

Microenvironment biophysical factors such as matrix stiffness can noticeably affect the differentiation of mesenchymal stem cells (MSCs). In this mechanobiology transduction process, mitochondria are shown to be an active participant. The present study aims to systematically elucidate the phenotypic and functional changes of mitochondria during the stiffness-mediated osteogenic differentiation. Additionally, the effect of mitochondria transfer on the osteogenesis of impaired MSCs caused by stiffness was investigated. Human periodontal ligament stem cells (PDLSCs) were used as model cells in the current study. Low stiffness restrained the cell spreading and significantly inhibited the proliferation and osteogenic differentiation of PDLSCs. Mitochondria of PDLSCs cultured on low stiffness exhibited shorter length, rounded shape, fusion/fission imbalance, ROS and mitophagy level increase, and ATP production reduction. The inhibited mitochondria function and osteogenic differentiation capacity were recovered to near-normal levels after transferring the mitochondria of PDLSCs cultured on the high stiffness. This study indicated that low matrix stiffness altered the mitochondrial morphology and induced systematical mitochondrial dysfunction during the osteogenic differentiation of MSCs. Mitochondria transfer was proved to be a feasible technique for maintaining MSCs function in vitro by reversing the osteogenesis ability.

Electroactive Biomaterials for Facilitating Bone Defect Repair under Pathological Conditions

Bone degeneration associated with various diseases is increasing due to rapid aging, sedentary lifestyles, and unhealthy diets. Living bone tissue has bioelectric properties critical to bone remodeling, and bone degeneration under various pathological conditions results in significant changes to these bioelectric properties. There is growing interest in utilizing biomimetic electroactive biomaterials that recapitulate the natural electrophysiological microenvironment of healthy bone tissue to promote bone repair. This review first summarizes the etiology of degenerative bone conditions associated with various diseases such as type II diabetes, osteoporosis, periodontitis, osteoarthritis, rheumatoid arthritis, osteomyelitis, and metastatic osteolysis. Next, the diverse array of natural and synthetic electroactive biomaterials with therapeutic potential are discussed. Putative mechanistic pathways by which electroactive biomaterials can mitigate bone degeneration are critically examined, including the enhancement of osteogenesis and angiogenesis, suppression of inflammation and osteoclastogenesis, as well as their anti-bacterial effects. Finally, the limited research on utilization of electroactive biomaterials in the treatment of bone degeneration associated with the aforementioned diseases are examined. Previous studies have mostly focused on using electroactive biomaterials to treat bone traumatic injuries. It is hoped that this review will encourage more research efforts on the use of electroactive biomaterials for treating degenerative bone conditions.

Electrical stimulation: Effective cue to direct osteogenic differentiation of mesenchymal stem cells?

Mesenchymal stem cells (MSCs) play a major role in bone tissue engineering (BTE) thanks to their capacity for osteogenic differentiation and being easily available. In vivo, MSCs are exposed to an electroactive microenvironment in the bone niche, which has piezoelectric properties. The correlation between the electrically active milieu and bone's ability to adapt to mechanical stress and self-regenerate has led to using electrical stimulation (ES) as physical cue to direct MSCs differentiation towards the osteogenic lineage in BTE. This review summarizes the different techniques to electrically stimulate MSCs to induce their osteoblastogenesis in vitro, including general electrical stimulation and substrate mediated stimulation by means of conductive or piezoelectric cell culture supports. Several aspects are covered, including stimulation parameters, treatment times and cell culture media to summarize the best conditions for inducing MSCs osteogenic commitment by electrical stimulation, from a critical point of view. Electrical stimulation activates different signaling pathways, including bone morphogenetic protein (BMP) Smad-dependent or independent, regulated by mitogen activated protein kinases (MAPK), extracellular signal-regulated kinases (ERK) and p38. The roles of voltage gate calcium channels (VGCC) and integrins are also highlighted according to their application technique and parameters, mainly converging in the expression of RUNX2, the master regulator of the osteogenic differentiation pathway. Despite the evident lack of homogeneity in the approaches used, the ever-increasing scientific evidence confirms ES potential as an osteoinductive cue, mimicking aspects of the in vivo microenvironment and moving one step forward to the translation of this approach into clinic.

Magnetoelectric Polymer Membrane-Based Electrical Microenvironment with Magnetically Controlled Antibacterial Activity

The "hard to clean" parts of food processing devices (e.g., the corners of pipes) are difficult to disinfect. This challenge might be overcome through the application of a positive electrical environment. However, the chemical modification of a material surface is complex and difficult. In this work, we developed a smart electroactive Tb_xDy_1-xFe alloy/poly(vinylidene fluoride-trifluoroethylene) (TD/P(VDF-TrFE)) magnetoelectric coating to endow stainless steel with the function of a smart adjustable electrical environment, which was realized by the introduction of a magnetic field of various intensities (0-1800 Oe). An antibacterial assay showed that the polarized coating@stainless steel (P-CS) exhibited antibacterial effects, with the highest antibacterial effect observed at 1800 Oe. Furthermore, in this study, we have, for the first time, explored the antibacterial mechanism of TD/P(VDF-TrFE)-assisted electrical stimulation based on the bacterial intracellular reactive oxygen species (ROS) level, cell respiratory chain, and membrane potential. The results showed that a microelectric field was formed on the P-CS sample in an aqueous solution, which not only generated ROS on the cathode surface but also caused H⁺ consumption in the electrochemical gradient of the bacterial membrane, leading to OH^- production and inhibition of adenosine triphosphate (ATP) synthesis. In addition, the electric field also induced hyperpolarization of the membrane potential in Escherichia coli cells via a K⁺ efflux, thus inducing rearrangement of the outer membrane. In conclusion, an adjustable surface potential was established through the introduction of magnetoelectric polymer coatings, which endowed stainless steel with magnetically controlled antibacterial effects.

Macrophages and Bone Marrow-Derived Mesenchymal Stem Cells Work in Concert to Promote Fracture Healing: A Brief Review

Bone marrow-derived mesenchymal stem cell (BMSC)-based and macrophage-based cell therapy are regarded as promising strategies to promote fracture healing because of incredible osteogenic potential of BMSCs and typical immunomodulatory function of macrophages. Apart from their respective key roles, accumulative evidence has also demonstrated the importance of cross talk between these two cell types in fracture healing process. This review takes a deep insight into the recent research progress of the synergic performance of BMSCs and macrophages by discussing not only the cells own functions but also the relevant impact factors and mechanisms (ambient microenvironment stimulus, miRNAs, etc). The aim of this review is to provide some valuable cues and technique support for the macrophage- and BMSC-related research, which will be helpful to propel BMSC/macrophage-based combined cell therapy for bone fracture treatment.

The osteogenic response to chirality-patterned surface potential distribution of CFO/P(VDF-TrFE) membranes

Piezoelectric poly(vinylidene fluoride-trifluoroethylene) has demonstrated an ability to promote osteogenesis, and the biomaterials with a chirality-patterned topological surface could enhance cellular osteogenic differentiation. In this work, we created a chirality-patterned...

Biophysical Stimuli as the Fourth Pillar of Bone Tissue Engineering

The repair of critical bone defects remains challenging worldwide. Three canonical pillars (biomaterial scaffolds, bioactive molecules, and stem cells) of bone tissue engineering have been widely used for bone regeneration in separate or combined strategies, but the delivery of bioactive molecules has several obvious drawbacks. Biophysical stimuli have great potential to become the fourth pillar of bone tissue engineering, which can be categorized into three groups depending on their physical properties: internal structural stimuli, external mechanical stimuli, and electromagnetic stimuli. In this review, distinctive biophysical stimuli coupled with their osteoinductive windows or parameters are initially presented to induce the osteogenesis of mesenchymal stem cells (MSCs). Then, osteoinductive mechanisms of biophysical transduction (a combination of mechanotransduction and electrocoupling) are reviewed to direct the osteogenic differentiation of MSCs. These mechanisms include biophysical sensing, transmission, and regulation. Furthermore, distinctive application strategies of biophysical stimuli are presented for bone tissue engineering, including predesigned biomaterials, tissue-engineered bone grafts, and postoperative biophysical stimuli loading strategies. Finally, ongoing challenges and future perspectives are discussed.

Light-induced osteogenic differentiation of BMSCs with graphene/TiO2 composite coating on Ti implant

Light-induced surface potential have been demonstrated as an effective bone marrow mesenchymal stem cells (BMSCs) osteogenic differentiation regulator. However, traditional bone repair implants almost were weak or no light-responsive. Fortunately, surface modification was a feasible strategy to realize its light functionalization for bone implants. Herein, a graphene oxide (GO)/titanium dioxide (TiO₂) nanodots composite coating on the surface of titanium (Ti) implant was constructed, and GO was reduced to reduced graphene oxide (rGO) with the method of UV-assisted photocatalytic reduction. After rGO deposited on the surface of TiO₂, a heterojunction formed at the interface of rGO and TiO₂. With visible light illumination, positive charges accumulated on the surface of rGO/TiO₂ film, and performed as a positive surface potential change. The light-induced surface potential which was generated under proper light intensity is harmless to the cell adhesion and proliferation behavior, but presented a good BMSCs osteogenic differentiation promoting effect, and the activation of the voltage-gated calcium channels through surface potential and the promotion of the adsorption of osteogenic growth factors could be the reason. This work given a new insight of the modification for Ti implant with a light-induced surface potential, and shows potential application for bone regeneration on the clinical practice through light stimulation.

Stem cell-based approaches in cardiac tissue engineering: controlling the microenvironment for autologous cells

Cardiovascular disease is one of the leading causes of mortality worldwide. Cardiac tissue engineering strategies focusing on biomaterial scaffolds incorporating cells and growth factors are emerging as highly promising for cardiac repair and regeneration. The use of stem cells within cardiac microengineered tissue constructs present an inherent ability to differentiate into cell types of the human heart. Stem cells derived from various tissues including bone marrow, dental pulp, adipose tissue and umbilical cord can be used for this purpose. Approaches ranging from stem cell injections, stem cell spheroids, cell encapsulation in a suitable hydrogel, use of prefabricated scaffold and bioprinting technology are at the forefront in the field of cardiac tissue engineering. The stem cell microenvironment plays a key role in the maintenance of stemness and/or differentiation into cardiac specific lineages. This review provides a detailed overview of the recent advances in microengineering of autologous stem cell-based tissue engineering platforms for the repair of damaged cardiac tissue. A particular emphasis is given to the roles played by the extracellular matrix (ECM) in regulating the physiological response of stem cells within cardiac tissue engineering platforms.

Magnetoelectric effect in flexible nanocomposite films based on size-matching

Flexible magnetoelectric (ME) nanocomposites with a strong coupling between ferromagnetism and ferroelectricity are of significant importance from the point of view of next-generation flexible electronic devices. However, a high loading of magnetic nanomaterials is needed to achieve preferable ME response due to the size mismatch of the magnetostrictive phase and piezoelectric phase. In this work, ultra-small CoFe2O4 nanoparticles were prepared to match the size of the polar crystal in poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)), and 1H,1H,2H,2H-perfluorooctyltriethoxysilane (POTS) is introduced to enhance the interplay between P(VDF-TrFE) and CoFe2O4. The above multiple effects promote a good connection between the magnetostrictive phase and the piezoelectric phase. Therefore, an effective transference of stress from CoFe2O4 to P(VDF-TrFE) can be achieved. The as-prepared P(VDF-TrFE)/CoFe2O4@POTS exhibits a high ME coupling coefficient of 34 mV cm-1 Oe-1 when the content of CoFe2O4@POTS is 20 wt%. The low loading of fillers ensures the flexibility of ME nanocomposite films.

Polarization behavior of bone marrow-derived macrophages on charged P(VDF-TrFE) coatings

The immune response of bone implants is closely related to the interaction between macrophages and biomaterial surfaces. In this work, the polarization behavior of mouse bone marrow-derived macrophages (BMDMs), including their morphology and expression of phenotypic markers, genes and cytokines, on charged surfaces with different potential intensities was systematically explored. We found that the charged surface could effectively promote BMDM polarization, and a higher potential intensity was conducive to the upregulation of the polarization of BMDMs into the M2 phenotype. Based on the analysis of the signaling pathways involved in integrins (αMβ2 and α5β1) and the potassium ion channel (Kv1.3), a possible underlying mechanism revealed that the integrin originated signaling pathways could more dominantly regulate macrophage polarization to the M2 phenotype. The present work therefore demonstrates that the surface charge, as a physicochemical property of material surfaces, could effectively regulate macrophage polarizations, which may provide an immunoregulation view for the surface design of biomaterials.