Multifunctional dopamine modification of green antibacterial hemostatic sponge

Tranexamic acid-loaded catechol-modified hyaluronic acid/carboxymethyl chitosan double cross-linked porous gel micropowders for rapid hemostasis and wound healing

Acquiring rapid and effective hemostasis remains a critical clinical challenge. Current researches focus on concentrating blood components to speed up the hemostatic while ignore the effect of anti-fibrinolysis in promoting blood coagulation. Herein, we designed a novel tranexamic acid (TA)-loaded physicochemical double cross-linked multifunctional catechol-modified hyaluronic acid-dopamine/carboxymethyl chitosan porous gel micropowders (TA&Fe3+@HA-DA/CMCS PGMs) for rapid hemostasis and wound healing. TA&Fe3+@HA-DA/CMCS PGMs exhibited high water absorption rate (505.9 ± 62.1 %) and rapid hemostasis (79 ± 4 s) in vivo. Catechol groups, Fe3+ and the protonated amino groups of CMCS induced bacterial death. Moreover, TA&Fe3+@HA-DA/CMCS PGMs displayed sufficient adhesion to a variety of wet rat tissues. TA&Fe3+@HA-DA/CMCS PGMs on various bleeding wounds, including rat liver injury and tail severed models showed excellent hemostasis performance. The TA&Fe3+@HA-DA/CMCS PGMs could promote the healing of full-thickness skin wounds on the backs of rats. The advantages of TA&Fe3+@HA-DA/CMCS PGMs including rapid hemostasis, effective wound healing, good tissue adhesion, antibacterial properties and ease of use make it potentially valuable in clinical application.

Platelet Vesicles Synergetic with Biosynthetic Cellulose Aerogels for Ultra-Fast Hemostasis and Wound Healing

Achieving hemostasis in penetrating and irregular wounds is challenging because the hemostasis factor cannot arrive at the bleeding site, and substantial bleeding will wash away the blood clot. Since the inherently gradual nature of blood clot formation takes time, a physical barrier is needed before blood clot formation. Herein, an ultra-light and shape memory hemostatic aerogel consisting of oxidized bacterial cellulose (OBC) and platelet extracellular vesicles (pVEs) is reported. The OBC-pVEs aerogel provides a physical barrier for the bleeding site by self-expansion, absorbing the liquid from blood to concentrate platelets and clotting factors and accelerating the clot formation by activating platelets and transforming fibrinogen into fibrin. In the rat liver and tail injury models, the blood loss decreases by 73% and 59%, and the bleeding times are reduced by 55% and 62%, respectively. OBC-pVEs aerogel has also been shown to accelerate wound healing. In conclusion, this work introduces an effective tool for treating deep, non-compressible, and irregular wounds and offers valuable strategies for trauma bleeding and wound treatment.

Comprehensive Assessment of Collagen/Sodium Alginate-Based Sponges as Hemostatic Dressings

In our search for a biocompatible composite hemostatic dressing, we focused on the design of a novel biomaterial composed of two natural biological components, collagen and sodium alginate (SA), cross-linked using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) and oxidized sodium alginate (OSA). We conducted a series of tests to evaluate the physicochemical properties, acute systemic toxicity, skin irritation, intradermal reaction, sensitization, cytotoxicity, and in vivo femoral artery hemorrhage model. The results demonstrated the excellent biocompatibility of the collagen/sodium alginate (C/SA)-based dressings before and after crosslinking. Specifically, the femoral artery hemorrhage model revealed a significantly shortened hemostasis time of 132.5 ± 12.82 s for the EDC/NHS cross-linked dressings compared to the gauze in the blank group (hemostasis time of 251.43 ± 10.69 s). These findings indicated that C/SA-based dressings exhibited both good biocompatibility and a significant hemostatic effect, making them suitable for biomedical applications.

A New Capillary-Channel Agarose Sponge Assembled with Deep Eutectic Solvent Based Magnetic Fluid for Rapid Hemostasis and Prevention of Bacterial Infection

A new composite sponge assisted by magnetic field-mediated guidance was developed for effective hemostasis. It was based on polydopamine capillary-channel agarose (PDA-CAGA) sponge as matrix; meanwhile, the combination of deep eutectic solvent (DES, choline chloride:glycerol = 1:1, M/M)-dispersed Fe3O4 nanoparticles after fabrication by tannic acid (DES-Fe3O4@TA) was applied as hemostatic magnetic fluid. This sponge had oriented and aligned capillary channels realized by a 3D printed pattern, which endowed them with obvious shape memory and liquid absorption performance. Computational simulation was performed to describe the fluid status in channels; DES-Fe3O4@TA exhibited good magnetic properties, fluidity, and stability. In addition, the sponge driven to react rapidly with the bleeding site under the effect of a magnetic field presented a shorter hemostasis time (reduced by 85.02% in the tail and 81.07% in the liver of rats) and less blood loss (reduced by 97.08% in the tail and 91.50% in the liver) than those of medical gelatin sponge (GS). Meanwhile, the multifunctional material also exhibited better biocompatibility, procoagulant performance, and significant inhibition on S. aureus and E. coli than GS. As a whole, this work proposed a new strategy for rapid hemostasis by designing a magnetic field assisted composite bacteriostatic material, which also expanded the applications of green solvents in the clinical management field.

Preparation and Application of Hemostatic Hydrogels

Hemorrhage remains a critical challenge in various medical settings, necessitating the development of advanced hemostatic materials. Hemostatic hydrogels have emerged as promising solutions to address uncontrolled bleeding due to their unique properties, including biocompatibility, tunable physical characteristics, and exceptional hemostatic capabilities. In this review, a comprehensive overview of the preparation and biomedical applications of hemostatic hydrogels is provided. Particularly, hemostatic hydrogels with various materials and forms are introduced. Additionally, the applications of hemostatic hydrogels in trauma management, surgical procedures, wound care, etc. are summarized. Finally, the limitations and future prospects of hemostatic hydrogels are discussed and evaluated. This review aims to highlight the biomedical applications of hydrogels in hemorrhage management and offer insights into the development of clinically relevant hemostatic materials.

A 3D-Printed Cuttlefish Bone Elastomeric Sponge Rapidly Controlling Noncompressible Hemorrhage

Developing a self-expanding hemostatic sponge with high blood absorption and rapid shape recovery for noncompressible hemorrhage remains a challenge. In this study, a 3D-printed cuttlefish bone elastomeric sponge (CBES) is fabricated, which combined ordered channels and porous structures, presented tunable mechanical strength, and shape memory potentials. The incorporation of cuttlefish bone powder (CBp) plays key roles in concentrating blood components, promoting aggregation of red blood cells and platelets, and activating platelets, which makes CBES show enhanced hemostatic performance compared with commercial gelatin sponges in vivo. Moreover, CBES promotes more histiocytic infiltration and neovascularization in the early stage of degradation than gelatin sponges, which is conducive to the regeneration and repair of injured tissue. To conclude, CBp loaded 3D-printed elastomeric sponges can promote coagulation, present the potential to guide tissue healing, and broaden the hemostatic application of traditional Chinese medicine.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Recent advances and biomedical application of 3D printed nanocellulose-based adhesive hydrogels: A review

Nanocellulose-based tissue adhesives show promise for achieving rapid hemostasis and effective wound healing. Conventional methods, such as sutures and staples, have limitations, prompting the exploration of bioadhesives for direct wound adhesion and minimal tissue damage. Nanocellulose, a hydrolysis product of cellulose, exhibits superior biocompatibility and multifunctional properties, gaining interest as a base material for bioadhesive development. This study explores the potential of nanocellulose-based adhesives for hemostasis and wound healing using 3D printing techniques. Nanocellulose enables the creation of biodegradable adhesives with minimal adverse effects and opens avenues for advanced wound healing and complex tissue regeneration, such as skin, blood vessels, lungs, cartilage, and muscle. This study reviews recent trends in various nanocellulose-based 3D printed hydrogel patches for tissue engineering applications. The review also introduces various types of nanocellulose and their synthesis, surface modification, and bioadhesive fabrication techniques via 3D printing for smart wound healing.

Recent Advances in Topical Hemostatic Materials

Untimely or improper treatment of traumatic bleeding may cause secondary injuries and even death. The traditional hemostatic modes can no longer meet requirements of coping with complicated bleeding emergencies. With scientific and technological advancements, a variety of topical hemostatic materials have been investigated involving inorganic, biological, polysaccharide, and carbon-based hemostatic materials. These materials have their respective merits and defects. In this work, the application and mechanism of the major hemostatic materials, especially some hemostatic nanomaterials with excellent adhesion, good biocompatibility, low toxicity, and high adsorption capacity, are summarized. In the future, it is the prospect to develop multifunctional hemostatic materials with hemostasis and antibacterial and anti-inflammatory properties for promoting wound healing.

Recent advances in the application of clay-containing hydrogels for hemostasis and wound healing

INTRODUCTION

Immediate control of bleeding and anti-infection play important roles in wound management. Multiple organ dysfunction syndrome and death may occur if persistent bleeding, hemodynamic instability, and hypoxemia are not addressed. The combination of clay and hydrogel provides a new outlet for wound hemostasis. In this review, the current research progress of hydrogel/clay composite hemostatic agents was reviewed.

AREAS COVERED

This paper summarizes the characteristics of several kinds of clay including kaolinite, montmorillonite, laponite, sepiolite, and palygorskite. The advantages and disadvantages of its application in hemostasis were also summarized. Future directions for the application of hydrogel/clay composite hemostatic agents are presented.

EXPERT OPINION

Clay can activate the endogenous hemostatic pathway by increasing blood cell concentration and promoting plasma absorption to accelerate the hemostasis. Clay is antimicrobial due to the slow release of metal ions and has a rich surface charge with a high affinity for proteins and cells to promote tissue repair. Hydrogels have some properties such as good biocompatibility, strong adhesion, high stretchability, and good self-healing. Despite promising advances, hydrogel/clay composite hemostasis remains a limitation. Therefore, more evidence is needed to further elucidate the risk factors and therapeutic effects of hydrogel/clay in hemostasis and wound healing.

Recent Development and Applications of Polydopamine in Tissue Repair and Regeneration Biomaterials

The various tissue damages are a severe problem to human health. The limited human tissue regenerate ability requires suitable biomaterials to help damage tissue repair and regeneration. Therefore, many researchers devoted themselves to exploring biomaterials suitable for tissue repair and regeneration. Polydopamine (PDA) as a natural and multifunctional material which is inspired by mussel has been widely applied in different biomaterials. The excellent properties of PDA, such as strong adhesion, photothermal and high drug-loaded capacity, seem to be born for tissue repair and regeneration. Furthermore, PDA combined with different materials can exert unexpected effects. Thus, to inspire researchers, this review summarizes the recent and representative development of PDA biomaterials in tissue repair and regeneration. This article focuses on why apply PDA in these biomaterials and what PDA can do in different tissue injuries.

Progress and future prospects of hemostatic materials based on nanostructured clay minerals

The occurrence of uncontrolled hemorrhage is a significant threat to human life and health. Although hemostatic materials have made remarkable advances in the biomaterials field, it remains a challenge to develop safe and effective hemostatic materials for global medical use. Natural clay minerals (CMs) have long been used as traditional inorganic hemostatic agents due to their good hemostatic capability, biocompatibility and easy availability. With the advancement of science, technology and ideology, CM-based hemostatic materials have undergone continuous innovations by integrating new inspirations with conventional concepts. This review systematically summarizes the hemostatic mechanisms of different natural CMs based on their nanostructures. Moreover, it also comprehensively reviews the latest research progress for CM-based hemostatic hybrid and nanocomposite materials, and discusses the challenges and developments in this field.

Injectable and photothermal antibacterial bacterial cellulose cryogel for rapid hemostasis and repair of irregular and deep skin wounds

For irregular and deep skin wounds, it's difficult for wound dressing to reach the injured site to achieve rapid hemostasis and provide wound protection. Bacterial cellulose (BC) has high strength and natural three-dimensional pore structure, which endows it shape recovery ability after absorbing blood when injected to the wound. Therefore, in the study, an injectable aldehyde bacterial cellulose/polydopamine (DBC/PDA) photothermal cryogel was prepared by oxidation polymerization method for hemostasis and repair of irregular and deep skin wounds. BC was oxidized by NaIO4 to form DBC and dopamine (DA) was introduced into DBC by reacting with the aldehyde group in DBC through Schiff base reaction. Under oxidation effect of NaIO4 and with freezing condition, water crystallization led to local aggregation of DA and DBC, and at the same time DA was oxidized to PDA and polymerized with DA on DBC. After the melting process, the porous cryogel was obtained. The introduction of PDA enhances the photothermal properties of DBC/PDA cryogel. DBC/PDA cryogel can kill most bacteria and provide wound protection under near-infrared light. In vitro and in vivo hemostatic tests show that the DBC/PDA cryogel can quickly absorb blood and stop bleeding. Combined with its good injectable, DBC/PDA cryogel can provide rapid hemostatic and protection in the face of irregular and deep skin wounds.

Preparation of SERS base membrane with cellulose compound dopamine and determination of hypochlorite

Flexible silver substrates were made by in situ reduction of silver nanoparticles in bacterial cellulose membranes using the unique advantage of dopamine. Subsequently, we modified the substrate with 4-mercaptophenol (4-MP), a molecule capable of specifically recognizing ClO-, and its corresponding SERS signal changes with the concentration of hypochlorite, thus allowing the quantitative detection of ClO- content. The method showed a negative linear correlation (R2 = 0.9567) with the SERS intensity at 1077 cm-1 over the concentration range 0.5-100 µM, and the detection limit was 0.15 µM. The RSD of the SERS intensity at 1077 cm-1 under five batches was 4.2%, which proved the good reproducibility of P-BCM-Ag NP-MP. Finally, the P-BCM-Ag NPs were used for the detection of hypochlorite in cell contents, artificial urine, and clinical serum samples, utilizing spike experiments in all three environments. The recoveries were in the range 90-110% indicating the accuracy of the method for the detection of hypochlorite and validating the promising application of this assay for practical detection in intricate biological samples.

Rapid hemostatic antibacterial self-gelling powder based on methacryloylsulfonyl betaine and quaternized carboxymethyl chitosan

Hemostatic powders can be used for deep wounds and wounds with irregular shapes that are frequently inaccessible to traditional hemostatic dressings like hemostatic gauze, sponges, and foams. In this study, sulfobetaine methacrylate (SBMA) and quaternized carboxymethyl chitosan (QCCS) were combined to create an antibacterial hemostatic hydrogel through photopolymerization under green LED irradiation, which was then changed into PSBMA/QCCS powder. PSBMA/QCCS powder could quickly form hydrogel with strong wet adhesion. The internal structure, water absorption capacity, and adhesion properties of the powder were evaluated. The coagulation ability, antimicrobial properties, and biocompatibility of the powder were also characterized. The PSBMA/QCCS powder could aggregate blood cells and platelets to enhance hemostasis. Meanwhile, PSBMA/QCCS powder also showed effective antibacterial ability against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). In summary, PSBMA/QCCS powder is a promising hemostatic agent with the characteristics of quick hemostasis, tough wet adhesion, satisfactory biocompatibility, considerable antibacterial effect, and adaptability to any irregularly shaped wounds.

Bacterial-Nanocellulose-Based Biointerfaces and Biomimetic Constructs for Blood-Contacting Medical Applications

Understanding the interaction between biomaterials and blood is critical in the design of novel biomaterials for use in biomedical applications. Depending on the application, biomaterials can be designed to promote hemostasis, slow or stop bleeding in an internal or external wound, or prevent thrombosis for use in permanent or temporary medical implants. Bacterial nanocellulose (BNC) is a natural, biocompatible biopolymer that has recently gained interest for its potential use in blood-contacting biomedical applications (e.g., artificial vascular grafts), due to its high porosity, shapeability, and tissue-like properties. To promote hemostasis, BNC has been modified through oxidation or functionalization with various peptides, proteins, polysaccharides, and minerals that interact with the coagulation cascade. For use as an artificial vascular graft or to promote vascularization, BNC has been extensively researched, with studies investigating different modification techniques to enhance endothelialization such as functionalizing with adhesion peptides or extracellular matrix (ECM) proteins as well as tuning the structural properties of BNC such as surface roughness, pore size, and fiber size. While BNC inherently exhibits comparable mechanical characteristics to endogenous blood vessels, these mechanical properties can be enhanced through chemical functionalization or through altering the fabrication method. In this review, we provide a comprehensive overview of the various modification techniques that have been implemented to enhance the suitability of BNC for blood-contacting biomedical applications and different testing techniques that can be applied to evaluate their performance. Initially, we focused on the modification techniques that have been applied to BNC for hemostatic applications. Subsequently, we outline the different methods used for the production of BNC-based artificial vascular grafts and to generate vasculature in tissue engineered constructs. This sequential organization enables a clear and concise discussion of the various modifications of BNC for different blood-contacting biomedical applications and highlights the diverse and versatile nature of BNC as a natural biomaterial.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Gelatin Methacryloyl-Based Sponge with Designed Conical Microchannels for Rapidly Controlling Hemorrhage and Theoretical Verification

It remains a challenge to develop effective hemostatic products in battlefield rescue for noncompressible massive hemorrhage. Some previous research had concentrated on the modification of different materials to improve the hemostasis ability of sponges. Herein, to investigate the relationship between the taper of microchannels and hemostatic performance of porous sponges, gelatin methacryloyl-based sponges with designed conical microchannels and a disordered porous structure were prepared using the 3D printing method and freeze-drying technology. Experiments and theoretical model analysis demonstrated that the taper and distribution of microchannels in the sponge affected the water and blood absorption properties, as well as the expansion ability. In treatment of SD rat liver defect and SD rat liver perforation wound, GS-1 sponge with the taper (1/15) microchannels exhibited an excellent hemostatic effect with blood loss of 0.866 ± 0.093 g and a hemostasis time of 280 ± 10 s. Results showed that the hemostatic capacities of GelMA sponges were increased with the bottom diameter (taper) of conical microchannels. This is a potential strategy to develop designed taper sponges with designed taper microchannels for rapidly controlling hemorrhage.

Preparation of biodegradable carboxymethyl cellulose/dopamine/Ag NPs cryogel for rapid hemostasis and bacteria-infected wound repair

Massive hemorrhage caused by accident or surgery is a major factor in accidental death. In addition, bacterial infection is also an important threat after bleeding. Cryogels with interpenetrating macroporous structures pose great application prospects in rapid hemostasis and infected wound repair. In this study, cryogels with different pore size are prepared by carboxymethyl cellulose (CMC) and dopamine (DA). The CMC grafted with different DA amounts is crosslinked by free DA through oxidative polymerization at low temperatures to form cryogels with different pore sizes. And the CMC/DA-3 cryogel is chosen as the optimal group for its high porosity, suitable mechanical, and good hemostatic ability. CMC/DA-3 cryogel is loaded with silver nanoparticles (Ag NPs) to prepare hemostatic cryogel with antibacterial properties. Antibacterial tests and animal hemostasis experiments confirm that the CMC/DA-3/Ag cryogel has good antibacterial properties and can finish rapid hemostasis. In the S. aureus infection skin defect model, the wound healing is significantly improved compared with commercial gelatin sponge. In summary, the novel cryogel has great potential in rapid hemostasis and infected wound healing.

Engineering of Near-Infrared-Activated Lignin-Polydopamine-Nanosilver Composites for Highly Efficient Sterilization

Photothermal synergistic antimicrobial therapy is considered a promising strategy to cope with antibiotic-resistant bacterial infections. In this work, lignin-based polydopamine nanosilver composites (LS-PDA-Ag) were engineered by a two-step process including self-assembly and microwave-assisted reduction. First, sodium lignosulfonate (LS) was not only used as a carrier to disperse polydopamine (PDA) and silver nanoparticles (AgNPs), but also used to reduce Ag+ for producing AgNPs. Second, PDA could promote the reduction of Ag+ and enhance the photothermal effect of AgNPs to further improve antibacterial efficiency. Finally, LS, AgNPs, and PDA complement each other, forming a synergistic photothermal antibacterial mechanism, achieving efficient bacterial killing within a short time. The antibacterial test of LS-PDA-Ag confirmed that 7.6 log10 CFU/mL of Escherichia coli were killed in 10 min under near-infrared irradiation. Furthermore, the LS-PDA-Ag can be blended with waterborne polyurethane to synthesize hybrid films, which also results in rapid sterilization and mechanical performance improvement. Considering the highly effective antibacterial activity of the LS-PDA-Ag composite, this work may provide perspectives on the design of green photothermal antibacterial materials.

Graphene-ophicalcite heterogeneous composite sponge for rapid hemostasis

Synergistic functionalization of interface coagulation stimulation and liquid absorption capacity is the key to improve the hemostatic efficiency of hemostats. Herein, we prepared a graphene-ophicalcite (OPH) heterogeneous composite sponge (GOCS) by using the heterogeneous gradient composite strategy. The sponge took cross-linked graphene sponge (CGS) as the main skeleton, allowing the OPH to be controllably positioned on the surface of GOCS. The heterogeneous strategy gave full play to the advantages of the material. On the one hand, GOCS had excellent liquid absorption ability, which enriched blood cells and other coagulation components at the wound interface after contacting blood. On the other hand, the OPH at the interface obviously activated platelets and rapidly triggered coagulation cascade reactions, exhibiting fast response and feedback characteristics for coagulation signals. Under the synergistic effects, the blood clotting index value of GOCS was reduced to 33.87 ± 9.97%, which was significantly lower than those of OPH (46.33 ± 16.85%) and CGS (67.53 ± 5.35%). Importantly, GOCS rapidly stopped bleeding within 51 s in the rat femoral artery model, suggesting its great potential in the field of hemostasis. Therefore, this study provides a new idea for the design and preparation of hemostatic materials via heterogeneous strategy.

Self-healing hydrogel based on polyphosphate-conjugated pectin with hemostatic property for wound healing applications

Self-healing hydrogels have important application in hemostasis and wound repairing. In this research, pectin based self-healing hydrogel was fabricated with conjugated polyphosphate for hemostatic and wound healing applications. The hydrogel formed without any stimulus and hydrogel kept its biocompatibility; at the same time, the hydrogel degraded completely by enzyme and in vivo. The polyphosphate conjugated hydrogel also showed self-healing property and sustained release performance with strong coagulation characteristic. More importantly, the in vivo experiment revealed that the polyphosphate conjugated hydrogel reduced the blood loss and hemostasis time in hemorrhage model; meanwhile, the hydrogel accelerated the wound repairing rate of the open wound by preventing bacterial invasion. Altogether, the PolyP conjugated hemostatic pectin-based hydrogel is a good candidate as wound dressing material applied in clinic or open wound repairing.

Oxidized bacterial cellulose reinforced nanocomposite scaffolds for bone repair

Bone tissue engineering has been widely used in promoting the repair and regeneration of bone defects. Tissue-engineered bone scaffolds can simulate the extracellular matrix environment and induce the proliferation and differentiation of osteoblasts. The first issues to be considered when constructing bone repair scaffolds include biocompatibility, stress resistance, degradability and stability. Here, a low-cost manufacturing introduces a new bone repair composite scaffold (CS/OBC/nHAP). The scaffolds were composed of only natural derived components, including nano hydroxyapatite (nHAP) formed by in-situ crystallization of Ca²⁺/PO₄^2- solution and evenly dispersed in oxidized bacterial cellulose (OBC) and chitosan (CS) scaffolds. The experimental results showed that compared with CS/nHAP scaffold, CS/OBC/nHAP scaffold has significantly improve mechanical properties and water retention performance, and has a more stable degradation rate. Cell experiments showed that the CS/OBC/nHAP scaffold has good biocompatibility and significantly promote the proliferation of MC3T3-E1 cells. The rat skull defect model further proves that the CS/OBC/nHAP scaffold could induce the formation of bone tissue. Meanwhile, H&E staining experiment show that the CS/OBC/nHAP scaffold has good stability in vivo and could better promote the formation of bone tissue.