Empowering biotechnology in southern Africa: establishment of a robust transformation platform for the production of transgenic industry-preferred cassava

CRISPR/Cas9: an advanced platform for root and tuber crops improvement

Root and tuber crops (RTCs), which include cassava, potato, sweet potato, and yams, principally function as staple crops for a considerable fraction of the world population, in addition to their diverse applications in nutrition, industry, and bioenergy sectors. Even then, RTCs are an underutilized group considering their potential as industrial raw material. Complexities in conventional RTC improvement programs curb the extensive exploitation of the potentials of this group of crop species for food, energy production, value addition, and sustainable development. Now, with the advent of whole-genome sequencing, sufficient sequence data are available for cassava, sweet potato, and potato. These genomic resources provide enormous scope for the improvement of tuber crops, to make them better suited for agronomic and industrial applications. There has been remarkable progress in RTC improvement through the deployment of new strategies like gene editing over the last decade. This review brings out the major areas where CRISPR/Cas technology has improved tuber crops. Strategies for genetic transformation of RTCs with CRISPR/Cas9 constructs and regeneration of edited lines and the bottlenecks encountered in their establishment are also discussed. Certain attributes of tuber crops requiring focus in future research along with putative editing targets are also indicated. Altogether, this review provides a comprehensive account of developments achieved, future lines of research, bottlenecks, and major experimental concerns regarding the establishment of CRISPR/Cas9-based gene editing in RTCs.

Evaluation of the effects of elevated CO2 concentrations on the growth of cassava storage roots by destructive harvests and ground penetrating radar scanning approaches

Cassava (Manihot esculenta Crantz) production will need to be improved to meet future food demands in Sub-Saharan Africa. The selection of high-yielding cassava cultivars requires a better understanding of storage root development. Additionally, since future production will happen under increasing atmospheric CO₂ concentrations ([CO₂ ]), cultivar selection should include responsiveness to elevated [CO₂ ]. Five farmer-preferred African cassava cultivars were grown for three and a half months in a Free Air CO₂ Enrichment experiment in central Illinois. Compared to ambient [CO₂ ] (~400 ppm), cassava storage roots grown under elevated [CO₂ ] (~600 ppm) had a higher biomass with some cultivars having lower storage root water content. The elevated [CO₂ ] stimulation in storage root biomass ranged from 33% to 86% across the five cultivars tested documenting the importance of this trait in developing new cultivars. In addition to the destructive harvests to obtain storage root parameters, we explored ground penetrating radar as a nondestructive method to determine storage root growth across the growing season.

A Transformation and Genome Editing System for Cassava Cultivar SC8

Cassava starch is a widely used raw material for industrial production. South Chinese cassava cultivar 8 (Manihot esculenta Crantz cv. SC8) is one of the main locally planted cultivars. In this study, an efficient transformation system for cassava SC8 mediated with Agrobacterium strain LBA4404 was presented for the first time. Cassava friable embryogenic calli (FECs) were transformed through the binary vector pCAMBIA1304 harboring GUS- and GFP-fused genes driven by the CaMV35S promoter. The transformation efficiency was increased in the conditions of Agrobacterium strain cell infection density (OD₆₀₀ = 0.65), 250 µM acetosyringone induction, and agro-cultivation with wet FECs for 3 days in dark. Based on the optimized transformation protocol, approximately 120–140 independent transgenic lines per mL settled cell volume (SCV) of FECs were created by gene transformation in approximately 5 months, and 45.83% homozygous mono-allelic mutations of the MePDS gene with a YAO promoter-driven CRISPR/Cas9 system were generated. This study will open a more functional avenue for the genetic improvement of cassava SC8.

Agrobacterium-mediated cassava transformation for the Asian elite variety KU50

Cassava genetic transformation has mostly been reported for African cassava varieties, but not for Asian varieties. This is the first report of cassava transformation in Asian elite varieties using friable embryogenic calli. Agrobacterium-mediated cassava transformation via friable embryogenic calli (FEC) has enabled the robust production of transgenic cassava. So far, mostly the model cassava variety 60444 and African varieties have been transformed because of their good production and regeneration from embryogenic tissues. It is important to develop transformation methods for elite Asian cassava varieties to meet the changing needs in one of the world's major cassava production areas. However, a suitable transformation method for the Asian elite variety Kasetsart 50 (KU50) has not been developed. Here, we report a transformation method for KU50, the cultivar with the highest planting area in Thailand and Vietnam. In cassava transformation, the preparation of FEC as the target tissue for transgene integration is a key step. FEC induction from KU50 was improved by using media with reduced nutrients and excess vitamin B1, and somatic embryo and plant regeneration optimized by manipulation of naphthalene acetic acid (NAA), and benzylamino purine (BAP). The transformation efficiency for KU50 was 22%, approximately half that of 60444 at 45%. Transcriptome analysis indicated that the expression of genes related to cell-wall loosening was upregulated in FEC from KU50 compared with 60444, indicating that cell-wall production and assembly were disproportionate in the Asian variety. The transformation system for KU50 reported here will contribute to the molecular breeding of cassava plants for Asian farmers using transgenic and genome-editing technologies.

Cassava mosaic disease and its management in Southeast Asia

Key message

Status of the current outbreak of cassava mosaic disease (CMD) in Southeast Asia was reviewed. Healthy cassava seed production and dissemination systems have been established in Vietnam and Cambodia, along with integrated disease and pest management systems, to combat the outbreak.

Abstract

Cassava (Manihot esculenta Crantz) is one of the most important edible crops in tropical and subtropical regions. Recently, invasive insect pests and diseases have resulted in serious losses to cassava in Southeast Asia. In this review we discuss the current outbreak of cassava mosaic disease (CMD) caused by the Sri Lankan cassava mosaic virus (SLCMV) in Southeast Asia, and summarize similarities between SLCMV and other cassava mosaic begomoviruses. A SATREPS (Science and Technology Research Partnership for Sustainable Development) project “Development and dissemination of sustainable production systems based on invasive pest management of cassava in Vietnam, Cambodia and Thailand”, was launched in 2016, which has been funded by The Japan International Cooperation Agency (JICA) and The Japan Science and Technology Agency (JST), Japan. The objectives of SATREPS were to establish healthy seed production and dissemination systems for cassava in south Vietnam and Cambodia, and to develop management systems for plant diseases and insect pests of cassava. To achieve these goals, model systems of healthy seed production in Vietnam and Cambodia have been developed incorporating CMD-resistant planting materials through international networks with The International Center for Tropical Agriculture (CIAT) and The International Institute of Tropical Agriculture (IITA).

Supplementary Information

The online version contains supplementary material available at 10.1007/s11103-021-01168-2.

Food safety, food security and genetically modified organisms in Africa: a current perspective

Moving forward from 2020, Africa faces an eminent challenge of food safety and security in the coming years. The World Food Programme (WFP) of the United Nations (UN) estimates that 20% of Africa's population of 1.2 billion people face the highest level of undernourishment in the world, likely to worsen due to COVID-19 pandemic that has brought the entire world to its knees. Factors such as insecurity and conflict, poverty, climate change and population growth have been identified as critical contributors to the food security challenges on the continent. Biotechnological research on Genetically Modified Organisms (GMOs) provides a range of opportunities (such as increased crop yields, resistance to pests and diseases, enhanced nutrient composition and food quality) in addressing the hunger, malnutrition and food security issues on the continent. However, the acceptance and adoption of GMOs on the continent has been remarkably slow, perhaps due to contrasting views about the benefits and safety concerns associated with them. With the reality of food insecurity and the booming population in Africa, there is an eminent need for a more pragmatic position to this debate. The present review presents an overview of the current situation of food safety and security and attempts to reconcile major viewpoints on GMOs research considering the current food safety and security crisis in the African continent.

Current progress and challenges in crop genetic transformation

Plant transformation remains the most sought-after technology for functional genomics and crop genetic improvement, especially for introducing specific new traits and to modify or recombine already existing traits. Along with many other agricultural technologies, the global production of genetically engineered crops has steadily grown since they were first introduced 25 years ago. Since the first transfer of DNA into plant cells using Agrobacterium tumefaciens, different transformation methods have enabled rapid advances in molecular breeding approaches to bring crop varieties with novel traits to the market that would be difficult or not possible to achieve with conventional breeding methods. Today, transformation to produce genetically engineered crops is the fastest and most widely adopted technology in agriculture. The rapidly increasing number of sequenced plant genomes and information from functional genomics data to understand gene function, together with novel gene cloning and tissue culture methods, is further accelerating crop improvement and trait development. These advances are welcome and needed to make crops more resilient to climate change and to secure their yield for feeding the increasing human population. Despite the success, transformation remains a bottleneck because many plant species and crop genotypes are recalcitrant to established tissue culture and regeneration conditions, or they show poor transformability. Improvements are possible using morphogenetic transcriptional regulators, but their broader applicability remains to be tested. Advances in genome editing techniques and direct, non-tissue culture-based transformation methods offer alternative approaches to enhance varietal development in other recalcitrant crops. Here, we review recent developments in plant transformation and regeneration, and discuss opportunities for new breeding technologies in agriculture.

Virus-Induced Gene Silencing (VIGS) in Cassava Using Geminivirus Agroclones

Virus-induced gene silencing (VIGS) is an efficient, low-cost, and rapid functional validation tool for candidate genes in planta. The VIGS approach is particularly suitable to perform reverse genetics studies in crop species. Here we present a detailed method to perform VIGS in cassava, from target gene fragment to agroinoculation and VIGS quantitation.

High sink strength prevents photosynthetic down-regulation in cassava grown at elevated CO2 concentration

Cassava has the potential to alleviate food insecurity in many tropical regions, yet few breeding efforts to increase yield have been made. Improved photosynthetic efficiency in cassava has the potential to increase yields, but cassava roots must have sufficient sink strength to prevent carbohydrates from accumulating in leaf tissue and suppressing photosynthesis. Here, we grew eight farmer-preferred African cassava cultivars under free-air CO2 enrichment (FACE) to evaluate the sink strength of cassava roots when photosynthesis increases due to elevated CO2 concentrations ([CO2]). Relative to the ambient treatments, elevated [CO2] treatments increased fresh (+27%) and dry (+37%) root biomass, which was driven by an increase in photosynthesis (+31%) and the absence of photosynthetic down-regulation over the growing season. Moreover, intrinsic water use efficiency improved under elevated [CO2] conditions, while leaf protein content and leaf and root cyanide concentrations were not affected. Overall, these results suggest that higher cassava yields can be expected as atmospheric [CO2] increases over the coming decades. However, there were cultivar differences in the partitioning of resources to roots versus above-grown biomass; thus, the particular responses of each cultivar must be considered when selecting candidates for improvement.

Efficient Genetic Transformation and Regeneration of a Farmer-Preferred Cassava Cultivar From Ghana

Cassava is an important staple crop that provides food and income for about 700 million Africans. Cassava productivity in Africa is limited by viral diseases, mainly cassava mosaic disease (CMD) and cassava brown streak disease (CBSD). Genetic barriers such as high heterozygosity, allopolyploidy, poor seed set, and irregular flowering constrain the development of virus-resistant cassava varieties via conventional breeding. Genetic transformation represents a valuable tool to circumvent several challenges associated with the development of virus resistance and other valuable agronomic traits in cassava. The implementation of genetic transformation in many local African cultivars is limited either by the difficulty to produce friable embryogenic callus (FEC), low transformation, and/or regeneration efficiencies. Here, we report the successful induction of organized embryogenic structures (OES) in 11 farmer-preferred cultivars locally grown in Ghana. The production of high quality FEC from one local cultivar, ADI 001, facilitated its genetic transformation with high shoot regeneration and selection efficiency, comparable to the model cassava cultivar 60444. We show that using flow cytometry for analysis of nuclear ploidy in FEC tissues prior to genetic transformation ensures the selection of genetically uniform FEC tissue for transformation. The high percentage of single insertion events in transgenic lines indicates the suitability of the ADI 001 cultivar for the introduction of virus resistance and other useful agronomic traits into the farmer-preferred cassava germplasm in Ghana and Africa.

Metabolic profiles of six African cultivars of cassava (Manihot esculenta Crantz) highlight bottlenecks of root yield

Cassava is an important staple crop in sub-Saharan Africa, due to its high productivity even on nutrient poor soils. The metabolic characteristics underlying this high productivity are poorly understood including the mode of photosynthesis, reasons for the high rate of photosynthesis, the extent of source/sink limitation, the impact of environment, and the extent of variation between cultivars. Six commercial African cassava cultivars were grown in a greenhouse in Erlangen, Germany, and in the field in Ibadan, Nigeria. Source leaves, sink leaves, stems and storage roots were harvested during storage root bulking and analyzed for sugars, organic acids, amino acids, phosphorylated intermediates, minerals, starch, protein, activities of enzymes in central metabolism and yield traits. High ratios of RuBisCO:phosphoenolpyruvate carboxylase activity support a C₃ mode of photosynthesis. The high rate of photosynthesis is likely to be attributed to high activities of enzymes in the Calvin-Benson cycle and pathways for sucrose and starch synthesis. Nevertheless, source limitation is indicated because root yield traits correlated with metabolic traits in leaves rather than in the stem or storage roots. This situation was especially so in greenhouse-grown plants, where irradiance will have been low. In the field, plants produced more storage roots. This was associated with higher AGPase activity and lower sucrose in the roots, indicating that feedforward loops enhanced sink capacity in the high light and low nitrogen environment in the field. Overall, these results indicated that carbon assimilation rate, the K battery, root starch synthesis, trehalose, and chlorogenic acid accumulation are potential target traits for genetic improvement.

Genetic Transformation of Recalcitrant Cassava by Embryo Selection and Increased Hormone Levels

Genetic engineering is considered to be an important tool for the improvement of cassava. Cassava is a highly heterozygous crop species for which conventional breeding is a lengthy and tedious process. Robust transformation is based on Agrobacterium-mediated transformation of friable embryogenic callus (FEC). Production of FEC is genotype-dependent and considered to be a major bottleneck for the genetic transformation of cassava. As a consequence, routine genetic transformation has only been established for a handful of cassava cultivars. Therefore, development of procedures enabling efficient production of high-quality cassava FEC is required to allow the translation of research from the model cultivar to farmer-preferred cassava cultivars. Here we study the FEC production capacity of Brazilian cassava cultivars and report the modification of the protocol for the genetic transformation of Verdinha (BRS 222), a recalcitrant cultivar with high potential for protein production that is extensively used by farmers in Brazil.

Toward improving photosynthesis in cassava: Characterizing photosynthetic limitations in four current African cultivars

Despite the vast importance of cassava (Manihot esculenta Crantz) for smallholder farmers in Africa, yields per unit land area have not increased over the past 55 years. Genetic engineering or breeding for increased photosynthetic efficiency may represent a new approach. This requires the understanding of limitations to photosynthesis within existing germplasm. Here, leaf photosynthetic gas exchange, leaf carbon and nitrogen content, and nonstructural carbohydrates content and growth were analyzed in four high-yielding and farm-preferred African cultivars: two landraces (TME 7, TME 419) and two improved lines (TMS 98/0581 and TMS 30572). Surprisingly, the two landraces had, on average, 18% higher light-saturating leaf CO 2 uptake (Asat) than the improved lines due to higher maximum apparent carboxylation rates of Rubisco carboxylation (Vcmax) and regeneration of ribulose-1,5-biphosphate expressed as electron transport rate (Jmax). TME 419 also showed a greater intrinsic water use efficiency. Except for the cultivar TMS 30572, photosynthesis in cassava showed a triose phosphate utilization (TPU) limitation at high intercellular [CO 2]. The capacity for TPU in the leaf would not limit photosynthesis rates under current conditions, but without modification would be a barrier to increasing photosynthetic efficiency to levels predicted possible in this crop. The lower capacity of the lines improved through breeding, may perhaps reflect the predominant need, until now, in cassava breeding for improved disease and pest resistance. However, the availability today of equipment for high-throughput screening of photosynthetic capacity provides a means to select for maintenance or improvement of photosynthetic capacity while also selecting for pest and disease resistance.

Novel Bioengineered Cassava Expressing an Archaeal Starch Degradation System and a Bacterial ADP-Glucose Pyrophosphorylase for Starch Self-Digestibility and Yield Increase

To address national and global low-carbon fuel targets, there is great interest in alternative plant species such as cassava (Manihot esculenta), which are high-yielding, resilient, and are easily converted to fuels using the existing technology. In this study the genes encoding hyperthermophilic archaeal starch-hydrolyzing enzymes, α-amylase and amylopullulanase from Pyrococcus furiosus and glucoamylase from Sulfolobus solfataricus, together with the gene encoding a modified ADP-glucose pyrophosphorylase (glgC) from Escherichia coli, were simultaneously expressed in cassava roots to enhance starch accumulation and its subsequent hydrolysis to sugar. A total of 13 multigene expressing transgenic lines were generated and characterized phenotypically and genotypically. Gene expression analysis using quantitative RT-PCR showed that the microbial genes are expressed in the transgenic roots. Multigene-expressing transgenic lines produced up to 60% more storage root yield than the non-transgenic control, likely due to glgC expression. Total protein extracted from the transgenic roots showed up to 10-fold higher starch-degrading activity in vitro than the protein extracted from the non-transgenic control. Interestingly, transgenic tubers released threefold more glucose than the non-transgenic control when incubated at 85°C for 21-h without exogenous application of thermostable enzymes, suggesting that the archaeal enzymes produced in planta maintain their activity and thermostability.

Cassava geminivirus agroclones for virus-induced gene silencing in cassava leaves and roots

AIM

We report the construction of a Virus-Induced Gene Silencing (VIGS) vector and an agroinoculation protocol for gene silencing in cassava (Manihot esculenta Crantz) leaves and roots. The African cassava mosaic virus isolate from Nigeria (ACMV-[NOg]), which was initially cloned in a binary vector for agroinoculation assays, was modified for application as VIGS vector. The functionality of the VIGS vector was validated in Nicotiana benthamiana and subsequently applied in wild-type and transgenic cassava plants expressing the uidA gene under the control of the CaMV 35S promoter in order to facilitate the visualization of gene silencing in root tissues. VIGS vectors were targeted to the Mg2+-chelatase gene in wild type plants and both the coding and promoter sequences of the 35S::uidA transgene in transgenic plants to induce silencing. We established an efficient agro-inoculation method with the hyper-virulent Agrobacterium tumefaciens strain AGL1, which allows high virus infection rates. The method can be used as a low-cost and rapid high-throughput evaluation of gene function in cassava leaves, fibrous roots and storage roots.

BACKGROUND

VIGS is a powerful tool to trigger transient sequence-specific gene silencing in planta. Gene silencing in different organs of cassava plants, including leaves, fibrous and storage roots, is useful for the analysis of gene function.

RESULTS

We developed an African cassava mosaic virus-based VIGS vector as well as a rapid and efficient agro-inoculation protocol to inoculate cassava plants. The VIGS vector was validated by targeting endogenous genes from Nicotiana benthamiana and cassava as well as the uidA marker gene in transgenic cassava for visualization of gene silencing in cassava leaves and roots.

CONCLUSIONS

The African cassava mosaic virus-based VIGS vector allows efficient and cost-effective inoculation of cassava for high-throughput analysis of gene function in cassava leaves and roots.

Formation of friable embryogenic callus in cassava is enhanced under conditions of reduced nitrate, potassium and phosphate

Agrobacterium-mediated transformation is an important research tool for the genetic improvement of cassava. The induction of friable embryogenic callus (FEC) is considered as a key step in cassava transformation. In the present study, the media composition was optimized for enhancing the FEC induction, and the effect of the optimized medium on gene expression was evaluated. In relative comparison to MS medium, results demonstrated that using a medium with reducing nutrition (a 10-fold less concentration of nitrogen, potassium, and phosphate), the increased amount of vitamin B1 (10 mg/L) and the use of picrolam led to reprogram non-FEC to FEC. Gene expression analyses revealed that FEC on modified media increased the expression of genes related to the regulation of polysaccharide biosynthesis and breakdown of cell wall components in comparison to FEC on normal CIM media, whereas the gene expression associated with energy flux was not dramatically altered. It is hypothesized that we reprogram non-FEC to FEC under low nitrogen, potassium and phosphate and high vitamin B1. These findings were more effective in inducing FEC formation than the previous protocol. It might contribute to development of an efficient transformation strategy in cassava.

Cassava Mosaic and Brown Streak Diseases: Current Perspectives and Beyond

Cassava is the fourth largest source of calories in the world but is subject to economically important yield losses due to viral diseases, including cassava brown streak disease and cassava mosaic disease. Cassava mosaic disease occurs in sub-Saharan Africa and the Asian subcontinent and is associated with nine begomovirus species, whereas cassava brown streak disease has to date been reported only in sub-Saharan Africa and is caused by two distinct ipomovirus species. We present an overview of key milestones and their significance in the understanding and characterization of these two major diseases as well as their associated viruses and whitefly vector. New biotechnologies offer a wide range of opportunities to reduce virus-associated yield losses in cassava for farmers and can additionally enable the exploitation of this valuable crop for industrial purposes. This review explores established and new technologies for genetic manipulation to achieve desired traits such as virus resistance.

Rooting for cassava: insights into photosynthesis and associated physiology as a route to improve yield potential

Contents 50 I. 50 II. 52 III. 54 IV. 55 V. 57 VI. 57 VII. 59 60 References 61 SUMMARY: As a consequence of an increase in world population, food demand is expected to grow by up to 110% in the next 30-35 yr. The population of sub-Saharan Africa is projected to increase by > 120%. In this region, cassava (Manihot esculenta) is the second most important source of calories and contributes c. 30% of the daily calorie requirements per person. Despite its importance, the average yield of cassava in Africa has not increased significantly since 1961. An evaluation of modern cultivars of cassava showed that the interception efficiency (ɛ_i ) of photosynthetically active radiation (PAR) and the efficiency of conversion of that intercepted PAR (ɛ_c ) are major opportunities for genetic improvement of the yield potential. This review examines what is known of the physiological processes underlying productivity in cassava and seeks to provide some strategies and directions toward yield improvement through genetic alterations to physiology to increase ɛ_i and ɛ_c . Possible physiological limitations, as well as environmental constraints, are discussed.

The potential of using biotechnology to improve cassava: a review

The importance of cassava as the fourth largest source of calories in the world requires that contributions of biotechnology to improving this crop, advances and current challenges, be periodically reviewed. Plant biotechnology offers a wide range of opportunities that can help cassava become a better crop for a constantly changing world. We therefore review the state of knowledge on the current use of biotechnology applied to cassava cultivars and its implications for breeding the crop into the future. The history of the development of the first transgenic cassava plant serves as the basis to explore molecular aspects of somatic embryogenesis and friable embryogenic callus production. We analyze complex plant-pathogen interactions to profit from such knowledge to help cassava fight bacterial diseases and look at candidate genes possibly involved in resistance to viruses and whiteflies-the two most important traits of cassava. The review also covers the analyses of main achievements in transgenic-mediated nutritional improvement and mass production of healthy plants by tissue culture and synthetic seeds. Finally, the perspectives of using genome editing and the challenges associated to climate change for further improving the crop are discussed. During the last 30 yr, great advances have been made in cassava using biotechnology, but they need to scale out of the proof of concept to the fields of cassava growers.

Factors influencing somatic embryogenesis, regeneration, and Agrobacterium-mediated transformation of cassava (Manihot esculenta Crantz) cultivar TME14

Routine production of large numbers of transgenic plants is required to fully exploit advances in cassava biotechnology and support development of improved germplasm for deployment to farmers. This article describes an improved, high-efficiency transformation protocol for recalcitrant cassava cultivar TME14 preferred in Africa. Factors that favor production of friable embryogenic calli (FEC) were found to be use of DKW medium, crushing of organized embryogenic structures (OES) through 1-2 mm sized metal wire mesh, washing of crushed OES tissues and short exposure of tyrosine to somatic embryos; and transformation efficiency was enhanced by use of low Agrobacterium density during co-cultivation, co-centrifugation of FEC with Agrobacterium, germination of paramomycin resistant somatic embryos on medium containing BAP with gradual increase in concentration and variations of the frequency of subculture of cotyledonary-stage embryos on shoot elongation medium. By applying the optimized parameters, FEC were produced for cassava cultivar TME14 and transformed using Agrobacterium strain LBA4404 harboring the binary vector pCAMBIA2301. About 70-80 independent transgenic lines per ml settled cell volume (SCV) of FEC were regenerated on selective medium. Histochemical GUS assays confirmed the expression of gusA gene in transformed calli, somatic embryos and transgenic plants. The presence and integration of the gusA gene were confirmed by PCR and Southern blot analysis, respectively. RT-PCR analysis of transgenic plants confirmed the expression of gusA gene. This protocol demonstrates significantly enhanced transformation efficiency over existing cassava transformation protocols and could become a powerful tool for functional genomics and transferring new traits into cassava.

Cassava (Manihot esculenta Crantz)

Genetic transformation of plants is an indispensable technique used for fundamental research and crop improvement. Recent advances in cassava (Manihot esculenta Crantz) transformation have facilitated the effective generation of stably transformed cassava plants with favorable traits. Agrobacterium-mediated transformation of friable, embryogenic callus has evolved to become the most widely used approach and has been adopted by research laboratories in Africa. This procedure utilizes axillary meristem tissue (buds) to produce primary and secondary somatic embryos and subsequently friable, embryogenic callus. Agrobacterium harboring a binary expression cassette is used to transform this tissue, which is regenerated via cotyledons and shoot organogenesis to produce rooted in vitro plantlets. This chapter details each step of the procedure using the model cultivar 60444 and provides supplementary notes to successfully produce transgenic cassava.

Transition from somatic embryo to friable embryogenic callus in cassava: dynamic changes in cellular structure, physiological status, and gene expression profiles

Friable embryogenic callus (FEC) is considered as the most suitable material for efficient genetic transformation of cassava. Heavy genotype dependence of FEC induction and amenability to somaclonal variation limits the production and maintenance of reliable FEC. Identifying key elements involved in biological processes from somatic embryos (SEs) to FEC at different stages provides critical insights for FEC improvement. Cytological observation showed a dramatic change of subcellular structures among SEs, fresh FEC (FFEC), and old FEC (OFEC). Decrease of sucrose and increase of fructose and glucose were detected in OFEC. A total of 6871 differentially expressed genes (DEGs) were identified from SEs, FFEC, and OFEC by RNA-seq. Analysis of the DEGs showed that FEC induction was accompanied by the process of dedifferentiation, whereas the epigenetics modification occurred during the continuous subculturing process. The cell structure was reconstructed, mainly including the GO terms of "cell periphery" and "external encapsulating structure"; in parallel, the internal mechanisms changed correspondingly, including the biological process of glycolysis and metabolisms of alanine, aspartate, and glutamate. The significant reduction of genomic DNA methylation in OFEC indicated altered gene expression via chromatin modification. These results indicate that the induction and long-term subculture of FEC is a complicated biological process involving changes of genome modification, gene expression, and subcellular reconstruction. The findings will be useful for improving FEC induction and maintenance from farmer-preferred cassava cultivars recalcitrant to genetic transformation, hence improving cassava through genetic engineering.

Unlocking the potential of tropical root crop biotechnology in east Africa by establishing a genetic transformation platform for local farmer-preferred cassava cultivars

Cassava genetic transformation capacity is still mostly restricted to advanced laboratories in the USA, Europe and China; and its implementation and maintenance in African laboratories has remained scarce. The impact of transgenic technologies for genetic improvement of cassava will depend largely on the transfer of such capabilities to researchers in Africa, where cassava has an important socioeconomic niche. A major constraint to the development of genetic transformation technologies for cassava improvement has been the lack of an efficient and robust transformation and regeneration system. Despite the success achieved in genetic modification of few cassava cultivars, including the model cultivar 60444, transgenic cassava production remains difficult for farmer-preferred cultivars. In this study, a protocol for cultivar 60444 developed at ETH Zurich was successfully implemented and optimized to establish transformation of farmer-preferred cassava cultivars popular in east Africa. The conditions for production and proliferation of friable embryogenic calli (FEC) and Agrobacterium-mediated transformation were optimized for three east African farmer-preferred cultivars (Ebwanatereka, Kibandameno and Serere). Our results demonstrated transformation efficiencies of about 14-22 independent transgenic lines per 100 mg of FEC for farmer-preferred cultivars in comparison to 28 lines per 100 mg of the model cultivar 60444. The presence, integration and expression of the transgenes were confirmed by PCR, Southern blot analysis and histochemical GUS assay. This study reports the establishment of a cassava transformation platform at International Institute of Tropical Agriculture (IITA) hosted by Biosciences eastern and central Africa (BecA) hub in Kenya and provides the basis for transferring important traits such as virus resistance and prolonged shelf-life to farmer-preferred cultivars in east Africa. We anticipate that such platform will also be instrumental to transfer technologies to national agricultural research systems (NARS) in sub-Saharan Africa.

Robust transformation procedure for the production of transgenic farmer-preferred cassava landraces

Recent progress in cassava transformation has allowed the robust production of transgenic cassava even under suboptimal plant tissue culture conditions. The transformation protocol has so far been used mostly for the cassava model cultivar 60444 because of its good regeneration capacity of embryogenic tissues. However, for deployment and adoption of transgenic cassava in the field it is important to develop robust transformation methods for farmer- and industry-preferred landraces and cultivars. Because dynamics of multiplication and regeneration of embryogenic tissues differ between cassava genotypes, it was necessary to adapt the efficient cv. 60444 transformation protocol to genotypes that are more recalcitrant to transformation. Here we demonstrate that an improved cassava transformation protocol for cv. 60444 could be successfully modified for production of transgenic farmer-preferred cassava landraces. The modified transformation method reports on procedures for optimization and is likely transferable to other cassava genotypes reportedly recalcitrant to transformation provided production of high quality FEC. Because the three farmer-preferred cassava landraces selected in this study have been identified as resistant or tolerant to cassava mosaic disease (CMD), the adapted protocol will be essential to mobilize improved traits into cassava genotypes suitable for regions where CMD limits production.