Point-of-care diagnosis of invasive non-typhoidal Salmonella enterica in bloodstream infections using immunomagnetic capture and loop-mediated isothermal amplification

Split fluorescent protein-mediated multimerization of cell wall binding domain for highly sensitive and selective bacterial detection

Cell wall peptidoglycan binding domains (CBDs) of cell lytic enzymes, including bacteriocins, autolysins and bacteriophage endolysins, enable highly selective bacterial binding, and thus, have potential as biorecognition molecules for nondestructive bacterial detection. Here, a novel design for a self-complementing split fluorescent protein (FP) complex is proposed, where a multimeric FP chain fused with specific CBDs ((FP-CBD)n) is assembled inside the cell, to improve sensitivity by enhancing the signal generated upon Staphylococcus aureus or Bacillus anthracis binding. Flow cytometry shows enhanced fluorescence on the cell surface with increasing FP stoichiometry and surface plasmon resonance reveals nanomolar binding affinity to isolated peptidoglycan. The breadth of function of these complexes is demonstrated through the use of CBD modularity and the ability to attach enzymatic detection modalities. Horseradish peroxidase-coupled (FP-CBD)n complexes generate a catalytic amplification, with the degree of amplification increasing as a function of FP length, reaching a limit of detection (LOD) of 103 cells/droplet (approximately 0.1 ng S. aureus or B. anthracis) within 15 min on a polystyrene surface. These fusion proteins can be multiplexed for simultaneous detection. Multimeric split FP-CBD fusions enable use as a biorecognition molecule with enhanced signal for use in bacterial biosensing platforms.

Application of LAMP assay for detection of carbapenem-resistant Acinetobacter calcoaceticus-Acinetobacter baumannii complex in ICU admitted sepsis patients: A rapid and cost-effective diagnostic tool

Carbapenem-resistant significant members of Acinetobacter calcoaceticus-Acinetobacter baumannii (CR-SM-ACB) complex have emerged as an important cause of sepsis, especially in ICUs. This study demonstrates the application of loop-mediated-isothermal-amplification (LAMP) assay for detection of CR-SM-ACB-complex from patients with sepsis. Whole-blood and culture-broths(CB) collected from patients with culture-positive sepsis were subjected to LAMP and compared with PCR, and RealAmp. Vitek-2 system and conventional PCR results were used as confirmatory references. The sensitivity and specificity of LAMP(97 % & 100 %) and RealAmp(100 % & 100 %) for detection of CR-SM-ACB-complex from CB were better than PCR(87 % & 100 %). Diagnostic accuracy of LAMP, RealAmp, and PCR for detection of SM-ACB-complex from CB was 98.5 %, 100 %, and 88.5 % respectively. Turnaround time of Culture, LAMP, PCR, and RealAmp was 28-53, 6-20, 9-23, and 6-20hours, respectively. LAMP is a simple, inexpensive tool that can be applied directly to positive CB and may be customized to detect emerging pathogens and locally-prevalent resistance genes and to optimize antimicrobial use.

Research progress of loop-mediated isothermal amplification in the detection of Salmonella for food safety applications

Salmonella, the prevailing zoonotic pathogen within the Enterobacteriaceae family, holds the foremost position in global bacterial poisoning incidents, thereby signifying its paramount importance in public health. Consequently, the imperative for expeditious and uncomplicated detection techniques for Salmonella in food is underscored. After more than two decades of development, loop-mediated isothermal amplification (LAMP) has emerged as a potent adjunct to the polymerase chain reaction, demonstrating significant advantages in the realm of isothermal amplification. Its growing prominence is evident in the increasing number of reports on its application in the rapid detection of Salmonella. This paper provides a systematic exposition of the technical principles and characteristics of LAMP, along with an overview of the research progress made in the rapid detection of Salmonella using LAMP and its derivatives. Additionally, the target genes reported in various levels, including Salmonella genus, species, serogroup, and serotype, are summarized, aiming to offer a valuable reference for the advancement of LAMP application in Salmonella detection. Finally, we look forward to the development direction of LAMP and expect more competitive methods to provide strong support for food safety applications.

Emerging Strategies against Non-Typhoidal Salmonella: From Pathogenesis to Treatment

Even with the intensive efforts by public health programs to control and prevent it, non-typhoidal Salmonella (NTS) infection remains an important public health challenge. It is responsible for approximately 150 million illnesses and 60,000 deaths worldwide annually. NTS infection poses significant risks with high rates of morbidity and mortality, leading to potential short- and long-term complications. There is growing concern among health authorities about the increasing incidence of antimicrobial resistance, with multidrug resistance totaling 22.6% in Europe, highlighting an urgent need for new therapeutic approaches. Our review aims to provide a comprehensive overview of NTS infection. We outline the molecular mechanisms involved in the pathogenesis of NTS infection, as well as the events leading to invasive NTS infection and the subsequent complications associated with it. Given the widespread implications of antimicrobial resistance, our review also presents the global landscape of resistance, including multidrug resistance, and delve into the underlying mechanisms driving this resistance. The rising rates of antibiotic resistance frequently lead to treatment failures, emphasizing the importance of investigating alternative therapeutic options. Therefore, in this review we also explore potential alternative therapies that could offer promising approaches to treating NTS infections.

A Systemic Review on Fitness and Survival of Salmonella in Dynamic Environment and Conceivable Ways of Its Mitigation

Gastroenteritis caused by non-typhoidal Salmonella still prevails resulting in several recent outbreaks affecting many people worldwide. The presence of invasive non-typhoidal Salmonella is exemplified by several characteristic symptoms and their severity relies on prominent risk factors. The persistence of this pathogen can be attributed to its broad host range, complex pathogenicity and virulence and adeptness in survival under challenging conditions inside the host. Moreover, a peculiar aid of the ever-changing climatic conditions grants this organism with remarkable potential to survive within the environment. Abusive use of antibiotics for the treatment of gastroenteritis has led to the emergence of multiple drug resistance, making the infections difficult to treat. This review emphasizes the importance of early detection of Salmonella, along with strategies for accomplishing it, as well as exploring alternative treatment approaches. The exceptional characteristics exhibited by Salmonella, like strategies of infection, persistence, and survival parallelly with multiple drug resistance, make this pathogen a prominent concern to human health.

Development of a closed-tube, calcein-based loop-mediated isothermal amplification assay to detect Salmonella spp. in raw meat samples

Foodborne pathogens compromise food safety and public health, and Salmonella spp. are among the major pathogenic bacteria that cause outbreaks worldwide. Proper surveillance through timely and cost-effective detection methods across the food animal production chain is crucial to prevent Salmonella outbreaks and agricultural losses. Traditional culture methods are labor- and resource-intensive, with lengthy turnaround times. Meanwhile, conventional molecular tools, such as PCR and qPCR, are expensive and require technical skills and equipment. Loop-mediated isothermal amplification (LAMP) is a simple, rapid, inexpensive, highly sensitive, and specific molecular assay that does not require expensive equipment. Hence, this study developed and optimized a closed-tube, calcein-based LAMP assay to detect Salmonella using the invA gene and performed evaluation and validation against conventional PCR. The LAMP assay showed high specificity and sensitivity. It showed 10-fold higher sensitivity than conventional PCR, at <1 ng/μL DNA concentrations. Meanwhile, for CFU/mL, LAMP assay showed 1000-fold higher sensitivity than conventional PCR at 4.8 × 103 cells/mL than 4.8 × 107 cells/mL, respectively. For parallel testing of 341 raw meat samples, after conventional culture enrichment (until Rappaport-Vassiliadis broth), the optimized LAMP assay showed 100% detection on all samples while conventional PCR showed 100%, 99.04%, and 96.64% for raw chicken, beef, and pork samples, respectively. Meanwhile, a shortened enrichment protocol involving 3-h incubation in buffered peptone water only, showed lower accuracy in tandem with the optimized LAMP assay ranging from 55 to 75% positivity rates among samples. These suggest that the optimized LAMP assay possesses higher sensitivity over conventional PCR for invA gene detection when coupled with conventional enrichment culture methods. Hence, this assay has potential as a powerful complementary or alternative Salmonella detection method to increase surveillance capacity and protect consumer food safety and public health worldwide.

Fast detection of bacterial gut pathogens on miniaturized devices: an overview

INTRODUCTION

Gut microbes pose challenges like colon inflammation, deadly diarrhea, antimicrobial resistance dissemination, and chronic disease onset. Development of early, rapid and specific diagnosis tools is essential for improving infection control. Point-of-care testing (POCT) systems offer rapid, sensitive, low-cost and sample-to-answer methods for microbe detection from various clinical and environmental samples, bringing the advantages of portability, automation, and simple operation.

AREAS COVERED

Rapid detection of gut microbes can be done using a wide array of techniques including biosensors, immunological assays, electrochemical impedance spectroscopy, mass spectrometry and molecular biology. Inclusion of Internet of Things, machine learning, and smartphone-based point-of-care applications is an important aspect of POCT. In this review, the authors discuss various fast diagnostic platforms for gut pathogens and their main challenges.

EXPERT OPINION

Developing effective assays for microbe detection can be complex. Assay design must consider factors like target selection, real-time and multiplex detection, sample type, reagent stability and storage, primer/probe design, and optimizing reaction conditions for accuracy and sensitivity. Mitigating these challenges requires interdisciplinary collaboration among scientists, clinicians, engineers, and industry partners. Future efforts are essential to enhance sensitivity, specificity, and versatility of POCT systems for gut microbe detection and quantification, advancing infectious disease diagnostics and management.

Rapid detection of Salmonella enterica in primary production samples by eliminating DNA amplification inhibitors using an improved sample pre-treatment method

Sensitive detection of pathogens in livestock farms is an integral part of the One Health Action Plan of the European Union (EU). Ensuring this requires on-site testing devices that are compatible with complex matrices such as primary production samples. Among all, faeces are considered the most challenging matrix type that makes it difficult to identify pathogens because of complexity in sample preparation for molecular testing. We have developed a loop-mediated isothermal amplification (LAMP) based veterinary point-of-care (POC) device (VETPOD) and adapted it to detect Salmonella enterica in primary production samples. Three different sampling methods (semi-wet chicken faeces, boot socks collection and dust samples from poultry shed) were iteratively tested to assess their nature of complexity and possibility for adapting them as suitable sampling methods for on-site testing. During the study, the sample preparation method that included a two-step centrifugation combined with washing of the enriched Salmonella cells was found crucial in eliminating amplification inhibitors originating from the faecal matrices. A total of 90 samples were tested that included 60 samples for sensitivity study and 30 samples for relative level of detection (RLOD, a level of detection in comparison to ISO 6579:1 reference method). Overall, the VETPOD had a sensitivity of 90%, 84.62% and 81.82% for boot sock, faecal and dust samples, respectively. The RLOD was 2.23 CFU/25 g which was found to be 1.33 times higher than the ISO 6579:1. Performing with an excellent agreement with ISO 6579:1, the VETPOD proved as a promising alternative to detect Salmonella spp. in primary production and animal husbandry samples.

Validation of Point-of-Care Device for Rapid Detection of Salmonella enterica in Meat Products

Accurate and rapid detection of pathogens in foods of animal origin has been a critical part of the One Health Action Plan of the European Union (EU). Biosensors have the potential in bringing required technologies to accomplish this on the field, wherein loop-mediated isothermal amplification (LAMP) and lab-on-a-chip have proven to be ideal. We have developed a LAMP-based point-of-care (POC) device, the VETPOD, as a solution to the contemporary challenges in the rapid detection of Salmonella spp. The core technology in the VETPOD is a ready-to-use cartridge that included an injection-molded polymer chip with pyramid-shaped optical structures embedded within the chip. These pyramid-shaped optical structures direct the incident light, due to total internal reflection (TIR), through the reaction chambers to the phototransistor. The VETPOD was validated against the ISO 6579-1 reference method. A total of 310 samples were tested that included 180 Salmonella spiked samples in 6 different meat categories and 130 strains to determine the specificity. The overall results were satisfactory, wherein the VETPOD had an acceptable sensitivity (96.51%) compared to the reference (98.81%) and near perfect agreement with ISO 6579-1 with an overall Cohen's kappa of 0.94. The relative level of detection (RLOD) for the VETPOD was 1.38 CFU/25 g that was found to be 1.17 times higher than the reference. The VETPOD showed 98% precision for inclusivity and 100% precision for the exclusivity samples. The VETPOD proved as a useful alternative to detect Salmonella spp. that can be adaptable to a broader spectrum of pathogens in future.

Boosting SARS-CoV-2 Enrichment with Ultrasmall Immunomagnetic Beads Featuring Superior Magnetic Moment

The isolation and enrichment efficiency of SARS-CoV-2 virus in complex biological environments is often relatively low, presenting challenges in direct detection and an increased risk of false negatives, particularly during the early stages of infection. To address this issue, we have developed a novel approach using ultrasmall magnetosome-like nanoparticles (≤10 nm) synthesized via biomimetic mineralization of the Mms6 protein derived from magnetotactic bacteria. These nanoparticles are surface-functionalized with hydrophilic carboxylated polyethylene glycol (mPEG2000-COOH) to enhance water solubility and monodispersity. Subsequently, they are coupled with antibodies targeting the receptor-binding domain (RBD) of the virus. The resulting magnetosome-like immunomagnetic beads (Mal-IMBs) exhibit high magnetic responsiveness comparable to commercial magnetic beads, with a saturation magnetization of 90.6 emu/g. Moreover, their smaller particle size provides a significant advantage by offering a higher specific surface area, allowing for a greater number of RBD single-chain fragment variable (RBD-scFv) antibodies to be coupled, thereby enhancing immune capture ability and efficiency. To validate the practicality of Mal-IMBs, we evaluated their performance in recognizing the RBD antigens, achieving a maximum capture ability of 83 μg/mg per unit mass. Furthermore, we demonstrated the binding capability of Mal-IMBs to SARS-CoV-2 pseudovirus using fluorescence microscopy. The Mal-IMBs effectively enriched the pseudovirus at a low copy concentration of 70 copies/mL. Overall, the small Mal-IMB exhibited excellent magnetic responsiveness and binding efficiency. By employing a multisite virus binding mechanism, it significantly improves the enrichment and separation of SARS-CoV-2 in complex environments, facilitating rapid detection of COVID-19 and contributing to effective measures against its spread.

Evaluation of A Simple DNA Extraction Method and Its Combination with Loop-Mediated Isothermal Amplification Assays for Rapid Plasmodium knowlesi Diagnosis

The initial and vital stage in the diagnosis of malaria involves extracting DNA. The efficiency of malaria testing is restricted by the multiple steps involved in commercial DNA extraction kits. We attempted to improve an existing loop-mediated isothermal amplification (LAMP) for the detection of Plasmodium knowlesi by using a simple DNA extraction approach, making it a feasible option for mass screening. We utilized a simple nucleic acid extraction method directly from whole blood for the detection of P. knowlesi, taking only 5 min to complete. The extracted DNA was evaluated by two fluorescent-based LAMP and one colorimetric-based LAMP assay. The detection limit for both SYTO-LAMP and SYBR green-LAMP was 0.00001% and 0.0001% parasitemia, respectively. Meanwhile, neutral red-LAMP had a detection limit of 0.01% parasitemia. Combining this simple and inexpensive DNA extraction method, SYTO-LAMP could serve as an alternative molecular diagnosis for the detection of P. knowlesi and other human Plasmodium spp.

Point-of-care system for rapid real-time detection of SARS-CoV-2 virus based on commercially available Arduino platforms

The COVID-19 pandemic emphasized the importance of rapid, portable, and on-site testing technologies necessary for resource-limited settings for effective testing and screening to reduce spreading of the infection. Realizing this, we developed a fluorescence-based point-of-care (fPOC) detection system with real-time reverse transcriptase loop-mediated isothermal amplification for rapid and quantitative detection of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus. The system is built based on the Arduino platform compatible with commercially available open-source hardware-software and off-the-shelf electronic components. The fPOC system comprises of three main components: 1) an instrument with integrated heaters, 2) optical detection components, and 3) an injection-molded polymeric cartridge. The system was tested and experimentally proved to be able to use for fast detection of the SARS-CoV-2 virus in real-time in less than 30 min. Preliminary results of testing the performance of the fPOC revealed that the fPOC could detect the SARS-CoV-2 virus at a limit of detection (LOD50%) at two to three copies/microliter (15.36 copies/reaction), which was comparable to reactions run on a standard commercial thermocycler. The performance of the fPOC was evaluated with 12 SARS-CoV-2 clinical throat swab samples that included seven positive and five negative samples, as confirmed by reverse transcription-polymerase chain reaction. The fPOC showed 100% agreement with the commercial thermocycler. This simple design of the fPOC system demonstrates the potential to greatly enhance the practical applicability to develop a totally integrated point-of-care system for rapid on-site screening of the SARS-CoV-2 virus in the management of the pandemic.

Elimination of Carryover Contamination in Real-Time Reverse Transcriptase Loop-Mediated Isothermal Amplification for Rapid Detection of the SARS-CoV-2 Virus in Point-of-Care Testing

Loop-mediated isothermal amplification (LAMP) is being used as a robust rapid diagnostic tool to prevent the transmission of infectious diseases. However, carryover contamination of LAMP-amplified products originating from previous tests has been a problem in LAMP-based bio-analytical assays. In this study, we developed a Cod-uracil-DNA-glycosylase real-time reverse transcriptase LAMP assay (Cod-UNG-rRT-LAMP) for the elimination of carryover contamination and the rapid detection of SARS-CoV-2 in point-of-care (POC) testing. Using the Cod-UNG-rRT-LAMP assay, the SARS-CoV-2 virus could be detected as low as 2 copies/µl (8 copies/reaction) within 45 min of amplification and 2.63 ± 0.17 pg (equivalent to 2.296 × 109 copies) of contaminants per reaction could be eliminated. Analysis of clinical SARS-CoV-2 samples using the Cod-UNG-rRT-LAMP assay showed an excellent agreement with a relative accuracy of 98.2%, sensitivity of 97.1%, and specificity of 95.2% in comparison to rRT-PCR. The results obtained in this study clearly demonstrate the feasibility of the use of the Cod-UNG-rRT-LAMP assay for applications toward the POC diagnosis of SARS-CoV-2 and on-site testing of other pathogens.