Advances in natural biomaterials for nerve tissue repair

Neural stem cell therapies for spinal cord injury repair: an update on recent preclinical and clinical advances

Traumatic spinal cord injury (SCI) is a leading cause of lifelong disabilities. Permanent sensory, motor and autonomic impairments after SCI are substantially attributed to degeneration of spinal cord neurons and axons, and disintegration of neural network. To date, minimal regenerative treatments are available for SCI with an unmet need for new therapies to reconstruct the damaged spinal cord neuron-glia network and restore connectivity with the supraspinal pathways. Multipotent neural precursor cells (NPCs) have a unique capacity to generate neurons, oligodendrocytes and astrocytes. Due to this capacity, NPCs have been an attractive cell source for cellular therapies for SCI. Transplantation of NPCs has been extensively tested in preclinical models of SCI in the past two decades. These studies have identified opportunities and challenges associated with NPC therapies. While NPCs have the potential to promote neuroregeneration through various mechanisms, their low long-term survival and integration within the host injured spinal cord limit the functional benefits of NPC-based therapies for SCI. To address this challenge, combinatorial strategies have been developed to optimize the outcomes of NPC therapies by enriching SCI microenvironment through biomaterials, genetic and pharmacological therapies. In this review, we will provide an in-depth discussion on recent advances in preclinical NPC-based therapies for SCI. We will discuss modes of actions and mechanism by which engrafted NPCs contribute to the repair process and functional recovery. We will also provide an update on current clinical trials and new technologies that have facilitated preparation of medical-grade human NPCs suitable for transplantation in clinical studies.

3D Gelatin Microsphere Scaffolds Promote Functional Recovery after Spinal Cord Hemisection in Rats

Spinal cord injury (SCI) damages signal connections and conductions, with the result that neuronal circuits are disrupted leading to neural dysfunctions. Such injuries represent a serious and relatively common central nervous system condition and current treatments have limited success in the reconstruction of nerve connections in injured areas, especially where sizeable gaps are present. Biomaterial scaffolds have become an effective alternative to nerve transplantation in filling these gaps and provide the foundation for simulating the 3D structure of solid organs. However, there remain some limitations with the application of 3D bioprinting for preparation of biomaterial scaffolds. Here, the approach in constructing and testing mini-tissue building blocks and self-assembly, solid 3D gelatin microsphere (GM) scaffolds with multiple voids as based on the convenient preparation of gelatin microspheres by microfluidic devices is described. These 3D GM scaffolds demonstrate suitable biocompatibility, biodegradation, porosity, low preparation costs, and relative ease of production. Moreover, 3D GM scaffolds can effectively bridge injury gaps, establish nerve connections and signal transductions, mitigate inflammatory microenvironments, and reduce glial scar formation. Accordingly, these 3D GM scaffolds can serve as a novel and effective bridging method to promote nerve regeneration and reconstruction and thus recovery of nerve function after SCI.

Biomaterial-Based Schwann Cell Transplantation and Schwann Cell-Derived Biomaterials for Nerve Regeneration

Schwann cells (SCs) dominate the regenerative behaviors after peripheral nerve injury by supporting axonal regrowth and remyelination. Previous reports also demonstrated that the existence of SCs is beneficial for nerve regeneration after traumatic injuries in central nervous system. Therefore, the transplantation of SCs/SC-like cells serves as a feasible cell therapy to reconstruct the microenvironment and promote nerve functional recovery for both peripheral and central nerve injury repair. However, direct cell transplantation often leads to low efficacy, due to injection induced cell damage and rapid loss in the circulatory system. In recent years, biomaterials have received great attention as functional carriers for effective cell transplantation. To better mimic the extracellular matrix (ECM), many biodegradable materials have been engineered with compositional and/or topological cues to maintain the biological properties of the SCs/SCs-like cells. In addition, ECM components or factors secreted by SCs also actively contribute to nerve regeneration. Such cell-free transplantation approaches may provide great promise in clinical translation. In this review, we first present the current bio-scaffolds engineered for SC transplantation and their achievement in animal models and clinical applications. To this end, we focus on the physical and biological properties of different biomaterials and highlight how these properties affect the biological behaviors of the SCs/SC-like cells. Second, the SC-derived biomaterials are also reviewed and discussed. Finally, the relationship between SCs and functional biomaterials is summarized, and the trends of their future development are predicted toward clinical applications.

Hyaluronic acid oligosaccharide-collagen mineralized product and aligned nanofibers with enhanced vascularization properties in bone tissue engineering

Considering the structural complexity of natural bone and the limitations of current treatment options, designing a biomimetic and functional tissue-engineered bone graft has been an urgent need for the replacement and regeneration of defected bone tissue. In light of the cell recruitment to the defect region, scaffold-guided bone tissue engineering has proven to be a viable strategy that is poised to deliver effective osseointegration and vascularization during bone remodeling. Herein, we provide an engineered bone scaffold based on aligned poly(lactic-co-glycolide) (PLGA) nanofibers incorporated with hyaluronic acid oligosaccharide-collagen mineralized microparticles (labeled oHA-Col/HAP) to guide the cell-specific orientation and osseointegration in bone healing. The aligned nanofibers were successfully prepared by a custom-made rotating mandrel with separating railings and HAs-Col/HAP mineralized microparticles were uniformly distributed in the composite scaffolds that acted as temporary templates for bone remodeling. The morphology, physicochemical properties and tensile strength of the scaffolds were characterized, the cell responses and in vivo biocompatibility and biodegradability of the scaffolds were also studied to evaluate the potential for bone tissue engineering. The experimental results illustrated that such anisotropic scaffolds loaded with oHA-Col/HAP microparticles mediated cell orderly arrangement conducive to the migration and recruitment of osseointegration-related cells and were stimulatory of cell proliferation. Those oHA-Col/HAP@PLGA scaffolds exhibited ideal biocompatibility and tissue regenerative capacity in vivo through a higher expression of vascularization-related genes. Overall, the novel engineered bone scaffold promises to serve as alternative candidates for bone tissue engineering applications.

Unraveling Muscle Impairment Associated With COVID-19 and the Role of 3D Culture in Its Investigation

COVID-19, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has been considered a public health emergency, extensively investigated by researchers. Accordingly, the respiratory tract has been the main research focus, with some other studies outlining the effects on the neurological, cardiovascular, and renal systems. However, concerning SARS-CoV-2 outcomes on skeletal muscle, scientific evidence is still not sufficiently strong to trace, treat and prevent possible muscle impairment due to the COVID-19. Simultaneously, there has been a considerable amount of studies reporting skeletal muscle damage in the context of COVID-19. Among the detrimental musculoskeletal conditions associated with the viral infection, the most commonly described are sarcopenia, cachexia, myalgia, myositis, rhabdomyolysis, atrophy, peripheral neuropathy, and Guillain-Barré Syndrome. Of note, the risk of developing sarcopenia during or after COVID-19 is relatively high, which poses special importance to the condition amid the SARS-CoV-2 infection. The yet uncovered mechanisms by which musculoskeletal injury takes place in COVID-19 and the lack of published methods tailored to study the correlation between COVID-19 and skeletal muscle hinder the ability of healthcare professionals to provide SARS-CoV-2 infected patients with an adequate treatment plan. The present review aims to minimize this burden by both thoroughly exploring the interaction between COVID-19 and the musculoskeletal system and examining the cutting-edge 3D cell culture techniques capable of revolutionizing the study of muscle dynamics.

Chitosan nanoparticles, as biological macromolecule-based drug delivery systems to improve the healing potential of artificial neural guidance channels: A review

The healing potential of artificial neural guidance channels (NGCs) can be improved by various approaches such as seeding them with supporting cells, the incorporation of various cues, and modification with different fabrication methods. Recently, the therapeutic appeal towards the use of drug-delivering NGCs has increased. In this framework, neuroprotective agents are incorporated into the structure of NGCs using different techniques. Among available methods, nanoparticle-based drug carriers offer numerous advantages over other formulations such as controlled drug release, targeted delivery, high encapsulation efficacy, and high surface to volume ratio. Chitosan nanoparticles have different interesting features for drug delivery applications. These nanocarriers are biocompatible, biodegradable, non-immunogenic, stable, and possess tunable properties. In the current review, applications, challenges, and future perspectives of drug-loaded chitosan nanoparticles to augment the healing potential of NGCs will be discussed.

Tissue Engineering Strategies for Peripheral Nerve Regeneration

A peripheral nerve injury (PNI) has severe and profound effects on the life of a patient. The therapeutic approach remains one of the most challenging clinical problems. In recent years, many constructive nerve regeneration schemes are proposed at home and abroad. Nerve tissue engineering plays an important role. It develops an ideal nerve substitute called artificial nerve. Given the complexity of nerve regeneration, this review summarizes the pathophysiology and tissue-engineered repairing strategies of the PNI. Moreover, we discussed the scaffolds and seed cells for neural tissue engineering. Furthermore, we have emphasized the role of 3D printing in tissue engineering.

Design Challenges in Polymeric Scaffolds for Tissue Engineering

Numerous surgical procedures are daily performed worldwide to replace and repair damaged tissue. Tissue engineering is the field devoted to the regeneration of damaged tissue through the incorporation of cells in biocompatible and biodegradable porous constructs, known as scaffolds. The scaffolds act as host biomaterials of the incubating cells, guiding their attachment, growth, differentiation, proliferation, phenotype, and migration for the development of new tissue. Furthermore, cellular behavior and fate are bound to the biodegradation of the scaffold during tissue generation. This article provides a critical appraisal of how key biomaterial scaffold parameters, such as structure architecture, biochemistry, mechanical behavior, and biodegradability, impart the needed morphological, structural, and biochemical cues for eliciting cell behavior in various tissue engineering applications. Particular emphasis is given on specific scaffold attributes pertaining to skin and brain tissue generation, where further progress is needed (skin) or the research is at a relatively primitive stage (brain), and the enumeration of some of the most important challenges regarding scaffold constructs for tissue engineering.

High-Yield Mucosal Olfactory Ensheathing Cells Restore Loss of Function in Rat Dorsal Root Injury

In a previous study, we reported that no axons were crossing from the severed dorsal roots to the spinal cord using the rat dorsal rhizotomy paradigm. The injury caused ipsilateral deficits of forepaw function. An attempt to restore the function by transplanting cells containing 5% olfactory ensheathing cells (OECs) cultured from the olfactory mucosa did not succeed. However, obtaining OECs from the olfactory mucosa has an advantage for clinical application. In the present study, we used the same rhizotomy paradigm, but rats with an injury received cells from a modified mucosal culture containing around 20% OECs mixed in collagen. The forelimb proprioception assessment showed that 80% of the rats receiving the transplants had functional improvement over six weeks of the study. The adhesive removal test showed that the time taken for the rats to notice the adhesive label and remove it almost returned to the normal level after receiving the transplants. Transplanted cells were identified with the expression of green fluorescent protein (ZsGreen). Some regeneration fibres immunostained for neurofilament (NF) or traced by biotinylated dextran amine (BDA) in the injury area were associated with the transplanted cells. The evidence in this study improves the prospect of clinical application using OECs from the olfactory mucosa to treat CNS injuries.

Types of biomaterials useful in brain repair

Biomaterials is an emerging field in the study of brain tissue engineering and repair or neurogenesis. The fabrication of biomaterials that can replicate the mechanical and viscoelastic features required by the brain, including the poroviscoelastic responses, force dissipation, and solute diffusivity are essential to be mapped from the macro to the nanoscale level under physiological conditions in order for us to gain an effective treatment for neurodegenerative diseases. This research topic has identified a critical study gap that must be addressed, and that is to source suitable biomaterials and/or create reliable brain-tissue-like biomaterials. This chapter will define and discuss the various types of biomaterials, their structures, and their function-properties features which would enable the development of next-generation biomaterials useful in brain repair.

Natural biomaterials in brain repair: A focus on collagen

Biomaterials derived from natural resources have increasingly been used for versatile applications in the central nervous system (CNS). Thanks to their biocompatibility and biodegradability, natural biomaterials offer vast possibilities for future clinical repair strategies for the CNS. These materials can be used for diverse applications such as hydrogels to fill the tissue cavities, microparticles to deliver drugs across the blood-brain barrier, and scaffolds to transplant stem cells. In this review, various uses of prominent protein and polysaccharide biomaterials, with a special focus on collagen, in repair and regenerative applications for the brain are summarized together with their individual advantages and disadvantages.

Graphene-based hybrid materials as promising scaffolds for peripheral nerve regeneration

Peripheral nerve injury (PNI) is a serious clinical health problem caused by the damage of peripheral nerves which results in neurological deficits and permanent disability. There are several factors that may cause PNI such as localized damage (car accident, trauma, electrical injury) and outbreak of the systemic diseases (autoimmune or diabetes). While various diagnostic procedures including X-ray, magnetic resonance imaging (MRI), as well as other type of examinations such as electromyography or nerve conduction studies have been efficiently developed, a full recovery in patients with PNI is in many cases deficient or incomplete. This is the reason why additional therapeutic strategies should be explored to favor a complete rehabilitation in order to get appropriate nerve injury regeneration. The use of biomaterials acting as scaffolds opens an interesting approach in regenerative medicine and tissue engineering applications due to their ability to guide the growth of new tissues, adhesion and proliferation of cells including the expression of bioactive signals. This review discusses the preparation and therapeutic strategies describing in vitro and in vivo experiments using graphene-based materials in the context of PNI and their ability to promote nerve tissue regeneration.

Biomaterial based strategies to reconstruct the nigrostriatal pathway in organotypic slice co-cultures

Protection or repair of the nigrostriatal pathway represents a principal disease-modifying therapeutic strategy for Parkinson's disease (PD). Glial cell line-derived neurotrophic factor (GDNF) holds great therapeutic potential for PD, but its efficacious delivery remains difficult. The aim of this study was to evaluate the potential of different biomaterials (hydrogels, microspheres, cryogels and microcontact printed surfaces) for reconstructing the nigrostriatal pathway in organotypic co-culture of ventral mesencephalon and dorsal striatum. The biomaterials (either alone or loaded with GDNF) were locally applied onto the brain co-slices and fiber growth between the co-slices was evaluated after three weeks in culture based on staining for tyrosine hydroxylase (TH). Collagen hydrogels loaded with GDNF slightly promoted the TH+ nerve fiber growth towards the dorsal striatum, while GDNF loaded microspheres embedded within the hydrogels did not provide an improvement. Cryogels alone or loaded with GDNF also enhanced TH+ fiber growth. Lines of GDNF immobilized onto the membrane inserts via microcontact printing also significantly improved TH+ fiber growth. In conclusion, this study shows that various biomaterials and tissue engineering techniques can be employed to regenerate the nigrostriatal pathway in organotypic brain slices. This comparison of techniques highlights the relative merits of different technologies that researchers can use/develop for neuronal regeneration strategies.

Neoglycosylated Collagen: Effect on Neuroblastoma F-11 Cell Lines

The regeneration of the nervous system is a challenging task. Currently, regenerative medicine approaches that exploit nature-inspired cues are being studied and hold great promise. The possibility to use protein-based matrices functionalized with small oligo- and monosaccharides is of interest since these can be finely tuned to better mimic the native environment. Collagen has been selected as a promising material that has the potential to be further tailored to incorporate carbohydrates in order to drive cell behavior towards neuroregeneration. Indeed, the grafting of carbohydrates to collagen 2D matrices is proved to enhance its biological significance. In the present study, collagen 2D matrices were grafted with different carbohydrate epitopes, and their potential to drive F-11 neuroblastoma cells towards neuronal differentiation was evaluated. Collagen functionalized with α-glucosides was able to differentiate neuroblastoma cells into functional neurons, while sialyl α-(2→6)-galactosides stimulated cell proliferation.

Mechanical properties of the sciatic nerve following combined transplantation of analytically extracted acellular allogeneic nerve and adipose-derived mesenchymal stem cells

Purpose

To investigate the effects of Chemically Extracted Acellular Nerves (CEANs) when combined with Adipose-Derived mesenchymal Stem Cell (ADSC) transplantation on the repair of sciatic nerve defects in rabbits.

Methods

A total of 71 six-month-old Japanese rabbit were used in this study. Twenty rabbits served as sciatic nerve donors, while the other 51 rabbits were randomly divided into Autologous Nerve Transplantation Group (ANT, n=17), CEAN group (n=17) and CEAN-ADSCs group (n=17). In all these groups, the rabbit’s left sciatic nerves were injured before the experiment, and the uninjured sciatic nerves on their right side were used as the control (CON). Electrophysiological tests were carried out and sciatic nerves were prepared for histomorphology and stretch testing at 24 weeks post-transplant.

Results

There were significant differences between ANT and Con groups in amplitude (AMP): P=0.031; motor nerve conduction velocity (MNCV): P=0.029; Maximum stress: P=0.029; and Maximum strain P=0.027. There were also differences between the CEAN and CEAN+ADSCs groups in AMP: P=0.026, MNCV: P=0.024; Maximum stress: P=0.025 and Maximum strain: P=0.030. No significant differences in these parameters were observed when comparing the ANT and CEAN+SACN groups (MNCV: P=0.071) or the CEAN and ANT groups (Maximum stress: P=0.069; Maximum strain P=0.077).

Conclusion

Addition of ADSCs has a significant impact on the recovery of nerve function, morphology, and tensile mechanical properties following sciatic nerve injury.

The Cellular and Molecular Patterns Involved in the Neural Differentiation of Adipose-Derived Stem Cells

Injuries to the nervous system cause serious problems among affected patients by preventing them from the possibility of living a normal life. As this tissue possesses a reduced capacity of self-regeneration currently, lots of different strategies are being developed in order to make the regeneration in the nervous system possible. Among them, tissue engineering and stem cell-based therapies are to date very exploded fields and tremendous progress has been made in this direction. As the two main components of the nervous system, react differently to injuries and behave different during disease, it is clear that two separate regeneration approaches have been taken into consideration during development of treatment. Special attention is constantly given to the potential of adipose-derived stem cells for this kind of application. Due to the fact that they present remarkable properties, they can easily be obtained and have demonstrated that are capable of engaging in neural and glial lineages, adipose-derived stem cells are promising tools for the field of nervous system regeneration. Moreover, new insights into epigenetic control and modifications during the differentiation of adipose-derived stem cells towards the neural liege could provide new methods to maximize the regeneration process. In this review, we summarize the current applications of adipose-derived stem cells for neural regeneration and discuss in-depth molecular patterns involved in the differentiation of adipose-derived stem cells in neuron-like cells and Schwann-like cells.

Medical Applications of Collagen and Collagen-Based Materials

Collagen and collagen-based materials have been successfully used in medicine for over 50 years. The number of scientific articles about the role of collagen in the construction of scaffolds for tissue engineering has risen precipitously in recent years. The review contains materials about historic and modern applications of collagen in medicine such as soluble collagen injections, solid constructs reconstructed from solution, and decellularized collagen matrices. The analysis of published data proves the efficacy of collagen material in the treatment of chronic wounds, burns, venous and diabetic ulcers, in plastic, reconstructive and general surgery, urology, proctology, gynecology, ophthalmology, otolaryngology, neurosurgery, dentistry, cardiovascular and bone and cartilage surgery, as well as in cosmetology. Further development of collagenoplasty requires addressing the problems of allergic complications, improvement of structure and maximizing therapeutic effects against pathological processes.

Silk fibroin hydrogels from the Colombian silkworm Bombyx mori L: Evaluation of physicochemical properties

Hydrogel scaffolds are important materials in tissue engineering, and their characterization is essential to determine potential biomedical applications according to their mechanical and structural behavior. In this work, silk fibroin hydrogels were synthesized by two different methods (vortex and sonication), and agarose hydrogels were also obtained for comparison purposes. Samples were characterized by scanning electron microscopy, infrared analysis, thermo-gravimetrical analysis, confined compression test, and rheological test. The results indicate that nanofibers can be obtained via both silk fibroin and agarose hydrogels. The mechanical tests showed that the Young's modulus is similar to those found in the literature, with the highest value for agarose hydrogels. All the hydrogels showed a shear-thinning behavior. Additionally, the MTT test revealed that silk fibroin hydrogels had low cytotoxicity in THP-1 and HEK-293 cells, whereas the agarose hydrogels showed high toxicity for the THP-1 cell line. The results indicate that silk fibroin hydrogels obtained from a Colombian silkworm hybrid are suitable for the development of scaffolds, with potential applications in tissue engineering.

Hydrogel-assisted neuroregeneration approaches towards brain injury therapy: A state-of-the-art review

Recent years have witnessed the development of an enormous variety of hydrogel-based systems for neuroregeneration. Formed from hydrophilic polymers and comprised of up to 90% of water, these three-dimensional networks are promising tools for brain tissue regeneration. They can assist structural and functional restoration of damaged tissues by providing mechanical support and navigating cell fate. Hydrogels also show the potential for brain injury therapy due to their broadly tunable physical, chemical, and biological properties. Hydrogel polymers, which have been extensively implemented in recent brain injury repair studies, include hyaluronic acid, collagen type I, alginate, chitosan, methylcellulose, Matrigel, fibrin, gellan gum, self-assembling peptides and proteins, poly(ethylene glycol), methacrylates, and methacrylamides. When viewed as tools for neuroregeneration, hydrogels can be divided into: (1) hydrogels suitable for brain injury therapy, (2) hydrogels that do not meet basic therapeutic requirements and (3) promising hydrogels which meet the criteria for further investigations. Our analysis shows that fibrin, collagen I and self-assembling peptide-based hydrogels display very attractive properties for neuroregeneration.

Acellular Cauda Equina Allograft as Main Material Combined with Biodegradable Chitin Conduit for Regeneration of Long-Distance Sciatic Nerve Defect in Rats

Autologous nerve grafting (ANG), the gold standard treatment for peripheral nerve defects, still has many restrictions. In this study, the acellular cauda equina allograft (ACEA), which consists of biodegradable chitin conduit and acellular cauda equina, is developed. The cauda equina is able to complete decellularization more quickly and efficiently than sciatic nerves under the same conditions, and it is able to reserve more basal lamina tube. In vitro, ACEA shows superior guidance capacity for the regeneration of axons and migration of Schwann cells compared to acellular sciatic nerve allograft (ASNA) in dorsal root ganglion culture. In vivo, ACEA is used to bridge 15 mm long-distance defects in rat sciatic nerves. On day 21 after transplantation, the regenerative distance of neurofilaments in the grafting segment is not significantly different between the ACEA and ANG groups. At week 12, ACEA group shows better sciatic nerve repair than chitin conduit only and ASNA groups, and the effect is similar to that in the ANG group as determined by gait analysis, neural electrophysiological, and histological analyses. The above results suggest that the ACEA has the potential to become a new biological material as a replacement for autografting in the treatment of long-distance nerve defects.

Hierarchically aligned fibrin nanofiber hydrogel accelerated axonal regrowth and locomotor function recovery in rat spinal cord injury

BACKGROUND

Designing novel biomaterials that incorporate or mimic the functions of extracellular matrix to deliver precise regulatory signals for tissue regeneration is the focus of current intensive research efforts in tissue engineering and regenerative medicine.

METHODS AND RESULTS

To mimic the natural environment of the spinal cord tissue, a three-dimensional hierarchically aligned fibrin hydrogel (AFG) with oriented topography and soft stiffness has been fabricated by electrospinning and a concurrent molecular self-assembling process. In this study, the AFG was implanted into a rat dorsal hemisected spinal cord injury model to bridge the lesion site. Host cells invaded promptly along the aligned fibrin hydrogels to form aligned tissue cables in the first week, and then were followed by axonal regrowth. At 4 weeks after the surgery, neurofilament (NF)-positive staining fibers were detected near the rostral end as well as the middle site of defect, which aligned along the tissue cables. Abundant NF- and GAP-43-positive staining indicated new axon regrowth in the oriented tissue cables, which penetrated throughout the lesion site in 8 weeks. Additionally, the abundant blood vessels marked with RECA-1 had reconstructed within the lesion site at 4 weeks after surgery. Basso-Beattie-Bresnahan scoring showed that the locomotor performance of the AFG group recovered much faster than that of blank control group or the random fibrin hydrogel (RFG) group from 2 weeks after surgery. Furthermore, diffusion tensor imaging tractography of MRI confirmed the optimal axon fiber reconstruction compared with the RFG and control groups.

CONCLUSION

Taken together, our results suggested that the AFG scaffold provided an inductive matrix for accelerating directional host cell invasion, vascular system reconstruction, and axonal regrowth, which could promote and support extensive aligned axonal regrowth and locomotor function recovery.

Natural Humic-Acid-Based Phototheranostic Agent

Humic acids, a major constituent of natural organic carbon resources, are naturally formed through the microbial biodegradation of animal and plant residues. Due to numerous physiologically active groups (phenol, carboxyl, and quinone), the biomedical applications of humic acid have been already investigated across different cultures for several centuries or even longer. In this work, sodium humate, the sodium salt of humic acid, is explored as phototheranostic agent for light-induced photoacoustic imaging and photothermal therapy based on intrinsic absorption in the near-infrared region. The purified colloidal sodium humate exhibits a high photothermal conversion efficiency up to 76.3%, much higher than that of the majority of state-of-the-art photothermal agents including gold nanorods, Cu₉ S₅ nanoparticles, antimonene quantum dots, and black phosphorus quantum dots, leading to obvious photoacoustic enhancement in vitro and in vivo. Besides, highly effective photothermal ablation of HeLa tumor is achieved through intratumoral injection. Impressively, sodium humate reveals ultralow toxicity at the cellular and animal levels. This work promises the great potential of humic acids as light-mediated theranostic agents, thus expanding the application scope of traditional humic acids in biomedical field.

Effects of processing on structural, mechanical and biological properties of collagen-based substrates for regenerative medicine

The aim of this work was to investigate the structural features of type I collagen isoforms and collagen-based films at atomic and molecular scales, in order to evaluate whether and to what extent different protocols of slurry synthesis may change the protein structure and the final properties of the developed scaffolds. Wide Angle X-ray Scattering data on raw materials demonstrated the preferential orientation of collagen molecules in equine tendon-derived collagens, while randomly oriented molecules were found in bovine skin collagens, together with a lower crystalline degree, analyzed by the assessment of FWHM (Full Width at Half Maximum), and a certain degree of salt contamination. WAXS and FT-IR (Fourier Transform Infrared) analyses on bovine collagen-based films, showed that mechanical homogenization of slurry in acidic solution was the treatment ensuring a high content of super-organization of collagen into triple helices and a high crystalline domain into the material. In vitro tests on rat Schwannoma cells showed that Schwann cell differentiation into myelinating cells was dependent on the specific collagen film being used, and was found to be stimulated in case of homogenization-treated samples. Finally DHT/EDC crosslinking treatment was shown to affect mechanical stiffness of films depending on collagen source and processing conditions.

Electrically conductive nanocomposite hydrogels embedded with functionalized carbon nanotubes for spinal cord injury

Electrically conductive hydrogels incorporated with CNTs support PC12 cell growth and differentiation and hold promise for nerve regeneration.

Biomaterials for Regenerative Medicine: Historical Perspectives and Current Trends

Biomaterials are key components in tissue engineering and regenerative medicine applications, with the intended purpose of reducing the burden of disease and enhancing the quality of life of a large number of patients. The success of many regenerative medicine strategies, such as cell-based therapies, artificial organs, and engineered living tissues, is highly dependent on the ability to design or produce suitable biomaterials that can support and guide cells during tissue healing and remodelling processes. This chapter presents an overview about basic research concerning the use of different biomaterials for tissue engineering and regenerative medicine applications. Starting from a historical perspective, the chapter introduces the basic principles of designing biomaterials for tissue regeneration approaches. The main focus is set on describing the main classes of biomaterials that have been applied in regenerative medicine, including natural and synthetic polymers, bioactive ceramics, and composites. For each class of biomaterials, some of the most important physicochemical and biological properties are presented. Finally, some challenges and concerns that remain in this field are presented and discussed.

Efect of longitudinally oriented collagen conduit combined with nerve growth factor on nerve regeneration after dog sciatic nerve injury

The research on artificial nerve conduits has become a focus of study in peripheral nerve reconstruction so as a possible replacement for the treatment of autologous nerve grafts in clinics. In this study, we used longitudinally oriented collagen conduit (LOCC) combined with nerve growth factor (NGF) to reconstruct long distance of sciatic nerve defects (35 mm) in adult dog model. The long term follow-up evaluation demonstrated that the LOCC/NGF conduit allowed functional and morphological nerve regeneration at the transection site of the injured sciatic nerve. Furthermore, the functional study confirmed that when NGF was loaded onto LOCC it promoted a better recovery of regenerated axons than LOCC alone. The gastrocnemius muscle mass in the LOCC/NGF group was significantly greater than in the LOCC alone group. The results indicated that when LOCC conduit combined with NGF it would provide a preferential environment for sciatic nerve regeneration. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2131-2139, 2018.

Polymeric scaffolds for three-dimensional culture of nerve cells: a model of peripheral nerve regeneration

Understanding peripheral nerve repair requires the evaluation of 3D structures that serve as platforms for 3D cell culture. Multiple platforms for 3D cell culture have been developed, mimicking peripheral nerve growth and function, in order to study tissue repair or diseases. To recreate an appropriate 3D environment for peripheral nerve cells, key factors are to be considered including: selection of cells, polymeric biomaterials to be used, and fabrication techniques to shape and form the 3D scaffolds for cellular culture. This review focuses on polymeric 3D platforms used for the development of 3D peripheral nerve cell cultures.

Mechanical characterization of human brain tumors from patients and comparison to potential surgical phantoms

While mechanical properties of the brain have been investigated thoroughly, the mechanical properties of human brain tumors rarely have been directly quantified due to the complexities of acquiring human tissue. Quantifying the mechanical properties of brain tumors is a necessary prerequisite, though, to identify appropriate materials for surgical tool testing and to define target parameters for cell biology and tissue engineering applications. Since characterization methods vary widely for soft biological and synthetic materials, here, we have developed a characterization method compatible with abnormally shaped human brain tumors, mouse tumors, animal tissue and common hydrogels, which enables direct comparison among samples. Samples were tested using a custom-built millimeter-scale indenter, and resulting force-displacement data is analyzed to quantify the steady-state modulus of each sample. We have directly quantified the quasi-static mechanical properties of human brain tumors with effective moduli ranging from 0.17–16.06 kPa for various pathologies. Of the readily available and inexpensive animal tissues tested, chicken liver (steady-state modulus 0.44 ± 0.13 kPa) has similar mechanical properties to normal human brain tissue while chicken crassus gizzard muscle (steady-state modulus 3.00 ± 0.65 kPa) has similar mechanical properties to human brain tumors. Other materials frequently used to mimic brain tissue in mechanical tests, like ballistic gel and chicken breast, were found to be significantly stiffer than both normal and diseased brain tissue. We have directly compared quasi-static properties of brain tissue, brain tumors, and common mechanical surrogates, though additional tests would be required to determine more complex constitutive models.

Functionalized Carbon Nanotube and Graphene Oxide Embedded Electrically Conductive Hydrogel Synergistically Stimulates Nerve Cell Differentiation

Nerve regeneration after injury is a critical medical issue. In previous work, we have developed an oligo(poly(ethylene glycol) fumarate) (OPF) hydrogel incorporated with positive charges as a promising nerve conduit. In this study, we introduced cross-linkable bonds to graphene oxide and carbon nanotube to obtain the functionalized graphene oxide acrylate (GOa) and carbon nanotube poly(ethylene glycol) acrylate (CNTpega). An electrically conductive hydrogel was then fabricated by covalently embedding GOa and CNTpega within OPF hydrogel through chemical cross-linking followed by in situ reduction of GOa in l-ascorbic acid solution. Positive charges were incorporated by 2-(methacryloyloxy)ethyltrimethylammonium chloride (MTAC) to obtain rGOaCNTpega-OPF-MTAC composite hydrogel with both surface charge and electrical conductivity. The distribution of CNTpega and GOa in the hydrogels was substantiated by transmission electron microscopy (TEM), and strengthened electrical conductivities were determined. Excellent biocompatibility was demonstrated for the carbon embedded composite hydrogels. Biological evaluation showed enhanced proliferation and spreading of PC12 cells on the conductive hydrogels. After induced differentiation using nerve growth factor (NGF), cells on the conductive hydrogels were effectively stimulated to have robust neurite development as observed by confocal microscope. A synergistic effect of electrical conductivity and positive charges on nerve cells was also observed in this study. Using a glass mold method, the composite hydrogel was successfully fabricated into conductive nerve conduits with surficial positive charges. These results suggest that rGOa-CNTpega-OPF-MTAC composite hydrogel holds great potential as conduits for neural tissue engineering.

Promotion of cell growth and adhesion of a peptide hydrogel scaffold via mTOR/cadherin signaling

Understanding neurite outgrowth, orientation, and migration is important for the design of biomaterials that interface with the neural tissue. However, the molecular signaling alternations have not been well elucidated to explain the impact of hydrogels on cell morphology. In our previous studies, a silk fibroin peptide (SF16) hydrogel was found to be an effective matrix for the viability, morphology, and proliferation of PC12 rat pheocrhomocytoma cells. We found that PC12 cells in the peptide hydrogel exhibited adhesive morphology compared to those cultured in agarose or collagen. Moreover, we identified that cell adhesion molecules (E- and N-cadherin) controlled by mTOR signaling were highly induced in PC12 cells cultured in the SF16 peptide hydrogel. Our findings suggest that the SF16 peptide might be suitable to be a cell-adhesion material in cell culture or tissue engineering, and mTOR/cadherin signaling is required for the cell adhesion in the SF16-peptide hydrogel.

A bioactive hyaluronic acid–based hydrogel cross-linked by Diels–Alder reaction for promoting neurite outgrowth of PC12 cells

In order to improve neurite outgrowth on the in situ formed hyaluronic acid–based hydrogel, furan and methacrylate groups were grafted on hyaluronic acid successively. Furthermore, a laminin-derived peptide CQAASIKVAV was covalently immobilized via the Michael addition. The furan- and peptide-modified hyaluronic acid was then cross-linked in situ by mixing with bismaleimide poly(ethylene glycol) at 37 °C to obtain a bioactive hyaluronic acid–based hydrogel. The hyaluronic acid derivatives were characterized by 1H NMR and Fourier transform infrared spectroscopy. The gelation, swelling, and mechanical property of the hydrogels were analyzed. The modulus of the hydrogel could be tuned by changing furan substitution degree, while the peptide concentration could be changed by the ratio of furan- and peptide-modified hyaluronic acid with hyaluronic acid–furan. In vitro culture of PC12 cells showed that the longest neurite outgrowth appeared on the hyaluronic acid–poly(ethylene glycol) hydrogel with the highest peptide content (the substitution degree of peptide in furan- and peptide-modified hyaluronic acid was 23 %) and a lower threshold modulus of 4.5 kPa. The furan and methacrylate-functionalized hyaluronic acid provides a versatile platform for diverse functionalization and can be used for modulation of other cell behaviors as well.

Evaluation of peripheral nerve regeneration through biomaterial conduits via micro-CT imaging

OBJECTIVE

Hollow nerve conduits made of natural or synthetic biomaterials are used clinically to aid regeneration of peripheral nerves damaged by trauma or disease. To support healing, conduit lumen patency must be maintained until recovery occurs. New methods to study conduit structural integrity would provide an important means to optimize conduits in preclinical studies. We explored a novel combined technique to examine structural integrity of two types of nerve conduits after in vivo healing.

STUDY DESIGN

Micro-CT imaging with iodine contrast was combined with histological analysis to examine two different nerve conduits after in vivo nerve reconstruction in rats.

MATERIALS AND METHODS

Sciatic nerve gaps in adult Lewis rats were reconstructed with poly(caprolactone) (PCL, 1.6 cm gap, 14-week survival) or silicone (1 cm gap, 6-week survival) conduits (N = 12 total). Conduits with regenerating tissues were imaged by micro-CT with iodine contrast and compared to the histology (hematoxylin and eosin, immunostaining for axons) of regenerated tissues after iodine removal.

RESULTS

PCL nerve conduits showed extensive breakage throughout their length, but all showed successful nerve growth through the conduits. The silicone conduits remained intact, although significant constriction was uniquely detected by micro-CT, with 1 of 6 animals showing incomplete tissue regeneration.

CONCLUSIONS

Micro-CT with iodine contrast offers a unique and valuable means to determine 3D structural integrity of nerve conduits and nerve healing following reconstruction. Furthermore, this paper shows that even if conduit compression and degradation occur, nerve regeneration can still take place.

Biomaterial Strategies for Delivering Stem Cells as a Treatment for Spinal Cord Injury

Ongoing clinical trials are evaluating the use of stem cells as a way to treat traumatic spinal cord injury (SCI). However, the inhibitory environment present in the injured spinal cord makes it challenging to achieve the survival of these cells along with desired differentiation into the appropriate phenotypes necessary to regain function. Transplanting stem cells along with an instructive biomaterial scaffold can increase cell survival and improve differentiation efficiency. This study reviews the literature discussing different types of instructive biomaterial scaffolds developed for transplanting stem cells into the injured spinal cord. We have chosen to focus specifically on biomaterial scaffolds that direct the differentiation of neural stem cells and pluripotent stem cells since they offer the most promise for producing the cell phenotypes that could restore function after SCI. In terms of biomaterial scaffolds, this article reviews the literature associated with using hydrogels made from natural biomaterials and electrospun scaffolds for differentiating stem cells into neural phenotypes. It then presents new data showing how these different types of scaffolds can be combined for neural tissue engineering applications and provides directions for future studies.

Matrix scaffolding for stem cell guidance toward skeletal muscle tissue engineering

Extracellular matrix (ECM) is composed of many types of fibrous structural proteins and glycosaminoglycans. This important cell component not only provides a support for cells but is also actively involved in cell-cell interaction, proliferation, migration, and differentiation, representing, therefore, no longer only a mere static structural scaffold for cells but rather a dynamic and versatile compartment. This aspect leads to the need for investigating new bio-inspired scaffolds or biomaterials, able to mimic ECM in tissue engineering. This new field of research finds particular employment in skeletal muscle tissue regeneration, due to the inability of this complex tissue to recover volumetric muscle loss (VML), after severe injury. Usually, this is the result of traumatic incidents, tumor ablations, or pathological states that lead to the destruction of a large amount of tissue, including connective tissue and basement membrane. Therefore, skeletal muscle tissue engineering represents a valid alternative to overcome this problem.Here, we described a series of natural and synthetic biomaterials employed as ECM mimics for their ability to recreate the correct muscle stem cell niche, by promoting myogenic stem cell differentiation and so, positively affecting muscle repair.

Hydrogels for brain repair after stroke: an emerging treatment option

Stroke disability is the only major disease without an effective treatment. The substantial clinical burden of stroke in disabled survivors and the lack of a medical therapy that promotes recovery provide an opportunity to explore the use of biomaterials to promote brain repair after stroke. Hydrogels can be injected as a liquid and solidify in situ to form a gelatinous solid with similar mechanical properties to the brain. These biomaterials have been recently explored to generate pro-repair environments within the damaged organ. This review highlights the clinical problem of stroke treatment and discusses recent advances in using in situ forming hydrogels for brain repair.

Self-assembling peptide nanofibers promoting cell adhesion and differentiation

There is an increasing need for the development of functional artificial extracellular matrices (ECMs) for tissue engineering. Recently, we have successfully designed a self-assembling peptide, named E1Y9, to construct functional ECMs. We describe here an enhancement of abilities of E1Y9 materials to promote cell adhesion and differentiation, using functional peptide sequences derived from natural extracellular matrix proteins. We designed functionalized self-assembling peptides, RGDS-conjugated E1Y9 (E1Y9-RGDS) and IKVAV-conjugated E1Y9 (E1Y9-IKVAV). E1Y9-RGDS and E1Y9-IKVAV formed peptide nanofibers in a similar manner to E1Y9, with β-sheet secondary structures. Surfaces coated with peptide nanofibers displayed the higher bioactivities of E1Y9-RGDS for cell adhesion and E1Y9-IKVAV for cell differentiation than those of E1Y9, with the activities being dependent on the concentrations of the functional peptides. These functionalized peptides will be useful for the construction of functional ECMs in cell and tissue engineering.

Application of marrow mesenchymal stem cell-derived extracellular matrix in peripheral nerve tissue engineering

To advance molecular and cellular therapy into the clinic for peripheral nerve injury, modification of neural scaffolds with the extracellular matrix (ECM) of peripheral nerves has been established as a promising alternative to direct inclusion of support cells and/or growth factors within a neural scaffold, while cell-derived ECM proves to be superior to tissue-derived ECM in the modification of neural scaffolds. Based on the fact that bone marrow mesenchymal stem cells (BMSCs), just like Schwann cells, are adopted as support cells within a neural scaffold, in this study we used BMSCs as parent cells to generate ECM for application in peripheral nerve tissue engineering. A chitosan nerve guidance conduit (NGC) and silk fibroin filamentous fillers were respectively prepared for co-culture with purified BMSCs, followed by decellularization to stimulate ECM deposition. The ECM-modified NGC and lumen fillers were then assembled into a chitosan-silk fibroin-based, BMSC-derived, ECM-modified neural scaffold, which was implanted into rats to bridge a 10 mm-long sciatic nerve gap. Histological and functional assessments after implantation showed that regenerative outcomes achieved by our engineered neural scaffold were better than those achieved by a plain chitosan-silk fibroin scaffold, and suggested the benefits of BMSC-derived ECM for peripheral nerve repair. Copyright © 2016 John Wiley & Sons, Ltd.