Local delivery of imiquimod in hamsters using mucoadhesive films and their residence time in human patients

Is imiquimod a promising drug to treat oral mucosa diseases? A scoping review and new perspectives

Imiquimod (IMQ) is a chemotherapeutic and immunostimulant drug that is applied topically, demonstrating antitumor and antiviral activities. The objective of this review was to compile data on the off-label use of IMQ in oral mucosal diseases. IMQ has exhibited effectiveness in the treatment of various oral mucosal conditions, including oral carcinogenic lesions, neoplasms, HPV-related lesions and autoimmune disorders. Although IMQ holds promise as a potential strategy for addressing oral mucosal lesions, it is important to note that significant side effects have been frequently reported. Nonetheless, it is crucial to develop and test new technological systems, such as the combination of nanotechnology with innovative drug delivery platforms. These advancements aim to minimize side effects and prolong the drug's contact time with the mucosa, preventing its removal by salivary flow.

Buccal films: A review of therapeutic opportunities, formulations & relevant evaluation approaches

The potential of the mucoadhesive film technology is hard to ignore, owing to perceived superior patient acceptability versus buccal tablets, and significant therapeutic opportunities compared to conventional oral drug delivery systems, especially for those who suffer from dysphagia. In spite of this, current translation from published literature into the commercial marketplace is virtually non-existent, with no authorised mucoadhesive buccal films available in the UK and very few available in the USA. This review seeks to provide an overview of the mucoadhesive buccal film technology and identify key areas upon which to focus scientific efforts to facilitate the wider adoption of this patient-centric dosage form. Several indications and opportunities for development were identified, while discussing the patient-related factors influencing the use of these dosage forms. In addition, an overview of the technologies behind the manufacturing of these films was provided, highlighting manufacturing methods like solvent casting, hot melt extrusion, inkjet printing and three-dimensional printing. Over thirty mucoadhesive polymers were identified as being used in film formulations, with details surrounding their mucoadhesive capabilities as well as their inclusion alongside other key formulation constituents provided. Lastly, the importance of physiologically relevant in vitro evaluation methodologies was emphasised, which seek to improve in vivo correlations, potentially leading to better translation of mucoadhesive buccal films from the literature into the commercial marketplace.

An Alternative Device for the Topical Treatment of Oral Cancer: Development and Ex-Vivo Evaluation of Imiquimod-Loaded Polysaccharides Formulations

The topical use of imiquimod (IMQ), a non-specific immune response modifier, showed to be a promising therapeutic option for the early-stage treatment of some type of oral cancer, even when performed with a formulation (Aldara®) developed and approved for skin application. The aim of this work was the development of buccal formulations for the topical administration of IMQ with improved mucosal retention and reduced trans-mucosal permeation when compared to the reference formulation. Three different hydrogels based on carboxymethyl chitosan (CMChit), sodium alginate (A), and xanthan gum (X) in different combinations were prepared, and the loading of imiquimod was successfully performed by using a micellar formulation based on d-α-tocopheril polyethylene glycol 100 succinate (TPGS). Except for CMChit formulation, in all the other cases, the performance in vitro on the mucosa resulted comparable to the commercial formulation, despite the drug loading being 50-fold lower. Converting the gels in films did not modify the IMQ accumulated with respect to the correspondent gel formulation but produced as a positive effect a significant reduction in the amount permeated. Compared to the commercial formulation, this reduction was significant (p < 0.01) in the case of X film, resulting in an improvement of the retained/permeated ratio from 1 to 5.44. Mucoadhesion evaluation showed similar behavior when comparing the developed gels and the commercial formulation, and an excellent bioadhesion was observed for the films.

Polymer-Based Carriers in Dental Local Healing-Review and Future Challenges

Polymers in drug formulation technology and the engineering of biomaterials for the treatment of oral diseases constitute a group of excipients that often possess additional properties in addition to their primary function, i.e., biological activity, sensitivity to stimuli, mucoadhesive properties, improved penetration of the active pharmaceutical ingredient (API) across biological barriers, and effects on wound healing or gingival and bone tissue regeneration. Through the use of multifunctional polymers, it has become possible to design carriers and materials tailored to the specific conditions and site of application, to deliver the active substance directly to the affected tissue, including intra-periodontal pocket delivery, and to release the active substance in a timed manner, allowing for the improvement of the form of application and further development of therapeutic strategies. The scope of this review is polymeric drug carriers and materials developed from selected multifunctional groups of natural, semi-synthetic, and synthetic polymers for topical therapeutic applications. Moreover, the characteristics of the topical application and the needs for the properties of carriers for topical administration of an active substance in the treatment of oral diseases are presented to more understand the difficulties associated with the design of optimal active substance carriers and materials for the treatment of lesions located in the oral cavity.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Design and Testing of Efficient Mucus-Penetrating Nanogels-Pitfalls of Preclinical Testing and Lessons Learned

Mucosal surfaces pose a challenging environment for efficient drug delivery. Various delivery strategies such as nanoparticles have been employed so far; yet, still yielding limited success. To address the need of efficient transmucosal drug delivery, this report presents the synthesis of novel disulfide-containing dendritic polyglycerol (dPG)-based nanogels and their preclinical testing. A bifunctional disulfide-containing linker is coupled to dPG to act as a macromolecular crosslinker for poly-N-isopropylacrylamide (PNIPAM) and poly-N-isopropylmethacrylamide (PNIPMAM) in a precipitation polymerization process. A systematic analysis of the polymerization reveals the importance of a careful polymer choice to yield mucus-degradable nanogels with diameters between 100 and 200 nm, low polydispersity, and intact disulfide linkers. Absorption studies in porcine intestinal tissue and human bronchial epithelial models demonstrate that disulfide-containing nanogels are highly efficient in overcoming mucosal barriers. The nanogels efficiently degrade and deliver the anti-inflammatory biomacromolecule etanercept into epithelial tissues yielding local anti-inflammatory effects. Over the course of this work, several problems are encountered due to a limited availability of valid test systems for mucosal drug-delivery systems. Hence, this study also emphasizes how critical a combined and multifaceted approach is for the preclinical testing of mucosal drug-delivery systems, discusses potential pitfalls, and provides suggestions for solutions.

Preparation of Celery Essential Oil-Based Nanoemulsion by Ultrasonication and Evaluation of Its Potential Anticancer and Antibacterial Activity

Introduction

Plants have always been a significant source of natural active components with biological properties. Celery seed oil (extracted from Apium graveolens) has several potential applications, but its therapeutic uses in the form of nanoemulsion formulation need to be investigated further in order to meet the demand in cancer treatment, and to alleviate the prevailing crisis arising from increased antimicrobial resistance.

Methods

The therapeutic potential of celery seed oil was investigated through the formulation and testing of a nanoemulsion developed with Tween 80 (a non-ionic surfactant) and the utilization of an ultrasonication technique. Anticancer and apoptotic properties of the formulation were evaluated through MTT and Annexin V-FITC assays. The clonogenic assay aided in the identification of the antiproliferative properties of the formulation on oral squamous cell carcinoma. The antimicrobial study was supported by agar well diffusion assay, membrane integrity test and scanning electron microscopy.

Results

Experiments identified relevant parameters, including optimal surfactant concentration and emulsification time. GC-MS analysis identified various components in the celery oil, but not their biological activities. A sonication time of 20 min resulted in a droplet diameter of 23.4 ± 1.80 nm. The IC₅₀ concentration of the optimal nanoemulsion formulation against SAS cells was 1.4 µL/mL. At this concentration, cell proliferation was significantly reduced through inhibition of the anchorage-independent cell growth by disrupting colony formation and inducing cell death (apoptosis) of cancer cells. The nanoemulsion was also treated with a microbial suspension of S. aureus, and displayed antibacterial properties through lipid membrane fusion, causing cytoplasmic leakage as verified through agar well diffusion and membrane permeability assays. Scanning electron microscopy revealed complete distortion of the bacterial pathogen.

Conclusion

The results in this study present celery as a possible constituent for cancer therapeutics and as a candidate for aggressive, yet safe cancer treatment. The celery-based nanoemulsion has the potential to act as a key alternative to standard antibiotic therapy.

Design, Development, and Characterization of Imiquimod-Loaded Chitosan Films for Topical Delivery

Aldara™ (5% w/w imiquimod) topical cream is approved by the US FDA for the treatment of superficial basal cell carcinoma. However, the cream formulation suffers from dose variability, low drug availability due to the incomplete release, and poor patient compliance. To achieve sustained and complete release of imiquimod, chitosan films were prepared by casting using propylene glycol as a plasticizer. Chitosan films had appropriate physicochemical characteristics for wound dressing and excellent content uniformity and maintained the original physical form of imiquimod. Films were capable of releasing a defined dose of imiquimod over a period of 7 days. The bioactivity of imiquimod was not affected by its entrapment in chitosan matrix as indicated by the results of in vitro growth inhibition assay. In addition, the film formulation showed significantly (p ˂ 0.05) higher drug accumulation in the skin when compared to commercial cream formulation.

Development of podophyllotoxin‑loaded nanostructured lipid carriers for the treatment of condyloma acuminatum

Condyloma acuminatum (CA) is a common sexually transmitted disease caused by human papillomavirus (HPV). Podophyllotoxin (POD), a cytotoxic compound, is able to effectively treat HPV; however, the severe irritation side effects of POD restrict its use as a treatment for CA. The aim of the present study was to construct novel POD‑loaded nanostructured nanolipid carriers (POD‑NLCs) and evaluate their physicochemical characteristics and cytotoxicity. POD‑NLCs (0.5%) were prepared using emulsion‑evaporation and low temperature‑solidification methods with optimized conditions and preparations. Subsequently, the POD‑NLCs were physicochemically characterized and their in vitro and in vivo release efficiencies and in vitro cytotoxicity were studied. The prepared POD‑NLCs had an average particle size, ζ potential, polydispersity index and encapsulation efficacy of 178.5±20 nm, ‑27±0.5 mV, 0.18±0.01 and 82.9±2%, respectively. In vitro and in vivo release studies demonstrated that POD‑NLCs are able to provide sustained drug delivery for 72 h in vitro and 10 h in the mucosa. Compared with a tincture formulation of POD (POD‑T), POD‑NLC induced less inflammatory cytokine production in the cervical mucous and led to a decreased histopathological score. In addition, a cytotoxicity assay demonstrated that inhibition of the POD‑NLCs was 98.4% at 24 h and remained >98% up to 72 h. Furthermore, more cells were arrested in the G2/M phase of the cell cycle following POD‑NLC treatment compared with the POD‑T treatment. The present study provides evidence that POD‑NLC is a promising delivery system for the treatment of CA.

Zero-order release of poorly water-soluble drug from polymeric films made via aqueous slurry casting

In spite of significant recent interest in polymeric films containing poorly water-soluble drugs, dissolution mechanism of thicker films has not been investigated. Consequently, release mechanisms of poorly water-soluble drugs from thicker hydroxypropyl methylcellulose (HPMC) films are investigated, including assessing thickness above which they exhibit zero-order drug release. Micronized, surface modified particles of griseofulvin, a model drug of BSC class II, were incorporated into aqueous slurry-cast films of different thicknesses (100, 500, 1000, 1500 and 2000 μm). Films 1000 μm and thicker were formed by either stacking two or more layers of ~500 μm, or forming a monolithic thick film. Compared to monolithic thick films, stacked films required simpler manufacturing process (easier casting, short drying time) and resulted in better critical quality attributes (appearance, uniformity of thickness and drug per unit area). Both the film forming approaches exhibited similar release profiles and followed the semi-empirical power law. As thickness increased from 100 μm to 2000 μm, the release mechanism changed from Fickian diffusion to zero-order release for films ≥1000 μm. The diffusional power law exponent, n, achieved value of 1, confirming zero-order release, whereas the percentage drug release varied linearly with sample surface area, and sample thickness due to fixed sample diameter. Thus, multi-layer hydrophilic polymer aqueous slurry-cast thick films containing poorly water-soluble drug particles provide a convenient dosage form capable of zero-order drug release with release time modulated through number of layers.

Polymeric drug delivery systems for intraoral site-specific chemoprevention of oral cancer

Oral cancer is among the most prevalent cancers in the world. Moreover, it is one of the major health problems and causes of death in many regions of the world. The traditional treatment modalities include surgical removal, radiation therapy, systemic chemotherapy, or a combination of these methods. In recent decades, there has been significant interest in intraoral site-specific chemoprevention via local drug delivery using polymeric systems. Because of its easy accessibility and clear visibility, the oral mucosa is amenable for local drug delivery. A variety of polymeric systems-such as gels, tablets, films, patches, injectable systems (e.g., millicylindrical implants, microparticles, and in situ-forming depots), and nanosized carriers (e.g., polymeric nanoparticles, nanofibers, polymer-drug conjugates, polymeric micelles, nanoliposomes, nanoemulsions, and polymersomes)-have been developed and evaluated for the local delivery of natural and synthetic chemopreventive agents. The findings of in vitro, ex vivo, and in vivo studies and the positive outcome of clinical trials demonstrate that intraoral site-specific drug delivery is an attractive, highly effective and patient-friendly strategy for the management of oral cancer. Intraoral site-specific drug delivery provides unique therapeutic advantages when compared to systemic chemotherapy. Moreover, intraoral drug delivery systems are self-administrable and can be removed when needed, increasing patient compliance. This article covers important aspects and advances related to the design, development, and efficacy of polymeric systems for intraoral site-specific drug delivery. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1383-1413, 2018.

Evaluation of different pig oral mucosa sites as permeability barrier models for drug permeation studies

The objective of the present study was to investigate the influence of preparation and storage conditions on the histology and permeability of different parts of porcine oral mucosa used for in vitro studies of transbuccal formulations. Fresh and frozen (-20°C and -80°C, with or without cryoprotectant) epithelia of porcine palatal, gingival, dorsum of the tongue, and buccal mucosa were submitted for histological analyses to determine the effects of storage conditions on barrier integrity. Permeation of lidocaine hydrochloride (used as a hydrophilic model drug) across fresh and previously frozen oral epithelium was measured in order to evaluate the barrier function. Histological evaluation demonstrated that the oral epithelium was successfully separated from the connective tissue, except for gingival mucosa. After storage under different conditions, all tissues presented desquamation of superficial layers and spherical spaces induced by the freezing process. The permeability of lidocaine hydrochloride varied among the fresh oral mucosa and generally increased after freezing. In conclusion, fresh epithelium from the buccal and dorsum of the tongue mucosa should be used for in vitro studies investigating hydrophilic drug transport when these are the desired clinical application sites. However, when the palate is the target site, both fresh and frozen (for up to 4weeks, without addition of cryoprotectant) samples could be used. The addition of glycerol as a cryoprotectant should be avoided due to increased lidocaine hydrochloride permeability.

Effects of epidermal growth factor-loaded mucoadhesive films on wounded oral tissue rafts

Current treatments for traumatic oral mucosal wounds include the gold standard of autologous tissue and alternative tissue-engineered grafts. While use of autografts has disadvantages of minimal availability of oral keratinized tissue, second surgery, and donor site discomfort, tissue-engineered grafts are limited by their unavailability as off-the-shelf products owing to their fabrication time of 4-8 weeks. Hence, the current work aimed to develop a potentially cost-effective, readily available device capable of enhancing native mucosal regeneration. Considering the key role of epidermal growth factor (EGF) in promoting mucosal wound regeneration and the advantages of mucoadhesive delivery systems, mucoadhesive films composed of polyvinylpyrrolidone and carboxymethylcellulose were developed to provide sustained release of EGF for a minimum of 6 h. Bioactivity of released EGF supernatants was then confirmed by its ability to promote proliferation of BALB/3T3 fibroblasts. Efficacy of the developed system was then investigated in vitro using buccal tissues (ORL 300-FT) as a potential replacement for small animal studies. Although the mucoadhesive films achieved their desired role of delivering bioactive EGF in a sustained manner, treatment with EGF, irrespective of its release from the films or solubilized in medium, caused a hyperparakeratotic response from in vitro tissues with distinguishable histological features including thickening of the spinous layer, intra- and intercellular edema, and pyknotic nuclei. These significant morphological changes were associated with no improvements in wound closure. These observations raise questions about the potential of using in vitro tissues as a wound healing model and substitute for small animal studies. The mucoadhesive delivery system developed, however, with its potential for sustained release of bioactive growth factors and small molecules, may be loaded with other desired compounds, with or without EGF, to accelerate the process of wound healing.