Antibacterial photodynamic activity of carbon quantum dots/polydimethylsiloxane nanocomposites against Staphylococcus aureus, Escherichia coli and Klebsiella pneumoniae

Chitosan/MgO NPs/CQDs bionanocomposite coating: Fabrication, characterization and determination of antimicrobial efficacy

The development of new polymer nanocomposites or antibacterial coatings is crucial in combating drug-resistant infections, particularly bacterial infections. In this study, a new chitosan polymer based nanocomposite reinforced with magnesium oxide nanopowders and carbon quantum dots was fabricated by sol-gel technique and coated on 316 L stainless steel. In order to gaining the optimal amount of components to achieve the maximum antibacterial properties, the effect of concentration of nanocomposite components on its antibacterial properties was investigated. Crystal structure, microstructure, elemental dispersion, size distribution, chemical composition and morphology of nanocomposite and coating were characterized with various analyses. The obtained results exhibited that the carbon quantum dot and magnesium oxide nanopowders were distributed uniformly and without agglomeration in the chitosan matrix and created a uniform coating. The antibacterial properties of the synthesized samples against Staphylococcus aureus bacteria (gram positive) were evaluated using disk diffusion and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) antibacterial tests. The inhibition growth zone formed around the antibiotic and nanocomposite 25 mg/ml under dark and light was about 32 and 14, 11 mm, respectively. Also, MIC and MBC values for final nanocomposite were 62.5 and 125 μg/ml, respectively.

Development of Sensitive In Vitro Protocols for the Biocompatibility Testing of Medical Devices and Pharmaceuticals Intended for Contact with the Eyes: Acute Irritation and Phototoxicity Assessment

This study introduces a novel in vitro methodology that employs the 3-D reconstructed tissue model, EpiOcular, to assess the irritation and phototoxicity potential of medical devices and drugs in contact with the eye. Our study evaluated diverse test materials, including medical devices, ophthalmological solutions and an experimental drug (cemtirestat), for their potential to cause eye irritation and phototoxicity. The protocols used in this study with the EpiOcular tissue model were akin to those used in the ultra-mildness testing of cosmetic formulations, which is challenging to predict with standard in vivo rabbit tests. To design these protocols, we leveraged experience gained from the validation project on the EpiDerm skin irritation test for medical devices (ISO 10993-23:2021) and the OECD TG 498 method for photo-irritation testing. The predictions were based on the tissue viability and inflammatory response, as determined by IL-1α release. By developing and evaluating these protocols for medical devices, we aimed to expand the applicability domain of the tests referred to in ISO 10993-23. This will contribute to the standardisation and cost-effective safety evaluation of ophthalmic products, while reducing reliance on animal testing in this field. The findings obtained from the EpiOcular model in the photo-irritation test could support its implementation in the testing strategies outlined in OECD TG 498.

White light powered antimicrobial nanoagents for triple photothermal, chemodynamic and photodynamic based sterilization

Antibacterial nanoagents have been increasingly developed due to their favorable biocompatibility, cost-effective raw materials, and alternative chemical or optical properties. Nevertheless, there is still a pressing need for antibacterial nanoagents that exhibit outstanding bacteria-binding capabilities and high antibacterial efficiency. In this study, we constructed a multifunctional cascade bioreactor (GCDCO) as a novel antibacterial agent. This involved incorporating carbon dots (CDs), cobalt sulfide quantum dots (CoSx QDs), and glucose oxidase (GOx) to enhance bacterial inhibition under sunlight irradiation. The GCDCO demonstrated highly efficient antibacterial capabilities attributed to its favorable photothermal properties, photodynamic activity, as well as the synergistic effects of hyperthermia, glucose-augmented chemodynamic action, and additional photodynamic activity. Within this cascade bioreactor, CDs played the role of a photosensitizer for photodynamic therapy (PDT), capable of generating ˙O2- even under solar light irradiation. The CoSx QDs not only functioned as a catalytic component to decompose hydrogen peroxide (H2O2) and generate hydroxyl radicals (˙OH), but they also served as heat generators to enhance the Fenton-like catalysis process. Furthermore, GOx was incorporated into this cascade bioreactor to internally supply H2O2 by consuming glucose for a Fenton-like reaction. As a result, GCDCO could generate a substantial amount of reactive oxygen species (ROS), leading to a significant synergistic effect that greatly induced bacterial death. Furthermore, the in vitro antibacterial experiment revealed that GCDCO displayed notably enhanced antibacterial activity against E. coli (99+ %) when combined with glucose under simulated sunlight, surpassing the efficacy of the individual components. This underscores its remarkable efficiency in combating bacterial growth. Taken together, our GCDCO demonstrates significant potential for use in the routine treatment of skin infections among diabetic patients.

Harnessing Efficient ROS Generation in Carbon Dots Derived from Methyl Red for Antimicrobial Photodynamic Therapy

The emergence of drug-resistant pathogenic microorganisms has become a public health concern, with demand for strategies to suppress their proliferation in healthcare facilities. The present study investigates the physicochemical and antimicrobial properties of carbon dots (CD-MR) derived from the methyl red azo dye. The morphological and structural analyses reveal that such carbon dots present a significant fraction of graphitic nitrogen in their structures, providing a wide emission range. Based on their low cytotoxicity against mammalian cells and tunable photoluminescence, these carbon dots are applied to bioimaging in vitro living cells. The possibility of using CD-MR to generate reactive oxygen species (ROS) is also analyzed, and a high singlet oxygen quantum efficiency is verified. Moreover, the antimicrobial activity of CD-MR is analyzed against pathogenic microorganisms Staphylococcus aureus, Candida albicans, and Cryptococcus neoformans. Kirby-Bauer susceptibility tests show that carbon dots synthesized from methyl red possess antimicrobial activity upon photoexcitation at 532 nm. The growth inhibition of C. neoformans from CD-MR photosensitization is investigated. Our results show that N-doped carbon dots synthesized from methyl red efficiently generate ROS and possess a strong antimicrobial activity against healthcare-relevant pathogens.

Synergistic effect of Ru(II)-based type II photodynamic therapy with cefotaxime on clinical isolates of ESBL-producing Klebsiella pneumoniae

Multidrug-resistant bacteria, such as ESBL producing-Klebsiella pneumoniae, have increased substantially, encouraging the development of complementary therapies such as photodynamic inactivation (PDI). PDI uses photosensitizer (PS) compounds that kill bacteria using light to produce reactive oxygen species. We test Ru-based PS to inhibit K. pneumoniae and advance in the characterization of the mode of action. The PDI activity of PSRu-L2, and PSRu-L3, was determined by serial micro dilutions exposing K. pneumoniae to 0.612 J/cm ² of light dose. PS interaction with cefotaxime was determined on a collection of 118 clinical isolates of K. pneumoniae. To characterize the mode of action of PDI, the bacterial response to oxidative stress was measured by RT-qPCR. Also, the cytotoxicity on mammalian cells was assessed by trypan blue exclusion. Over clinical isolates, the compounds are bactericidal, at doses of 8 µg/mL PSRu-L2 and 4 µg/mL PSRu-L3, inhibit bacterial growth by 3 log₁₀ (>99.9%) with a lethality of 30 min. A remarkable synergistic effect of the PSRu-L2 and PSRu-L3 compounds with cefotaxime increased the bactericidal effect in a subpopulation of 66 ESBL-clinical isolates to > 6 log₁₀ with an FIC-value of 0.16 and 0.17, respectively. The bacterial transcription response suggests that the mode of action occurs through Type II oxidative stress. The upregulation of the extracytoplasmic virulence factors mrkD, magA, and rmpA accompanied this response. Also, the compounds show little or no toxicity in vitro on HEp-2 and HEK293T cells. Through the type II effect, PSs compounds are bactericidal, synergistic on K. pneumoniae, and have low cytotoxicity in mammals.

Lights and Dots toward Therapy-Carbon-Based Quantum Dots as New Agents for Photodynamic Therapy

The large number of deaths induced by carcinoma and infections indicates that the need for new, better, targeted therapy is higher than ever. Apart from classical treatments and medication, photodynamic therapy (PDT) is one of the possible approaches to cure these clinical conditions. This strategy offers several advantages, such as lower toxicity, selective treatment, faster recovery time, avoidance of systemic toxic effects, and others. Unfortunately, there is a small number of agents that are approved for usage in clinical PDT. Novel, efficient, biocompatible PDT agents are, thus, highly desired. One of the most promising candidates is represented by the broad family of carbon-based quantum dots, such as graphene quantum dots (GQDs), carbon quantum dots (CQDs), carbon nanodots (CNDs), and carbonized polymer dots (CPDs). In this review paper, these new smart nanomaterials are discussed as potential PDT agents, detailing their toxicity in the dark, and when they are exposed to light, as well as their effects on carcinoma and bacterial cells. The photoinduced effects of carbon-based quantum dots on bacteria and viruses are particularly interesting, since dots usually generate several highly toxic reactive oxygen species under blue light. These species are acting as bombs on pathogen cells, causing various devastating and toxic effects on those targets.

Based on multi-omics technology study the antibacterial mechanisms of pH-dependent N-GQDs beyond ROS

Currently, graphene quantum dots (GQDs) are widely used as antibacterial agents, and their effects are dependent on the reactive oxygen species (ROS) generated by photodynamic and peroxidase activities. Nevertheless, the supply of substrates or light greatly limits GQDs application. Besides, due to compensatory mechanisms in bacteria, comprehensive analysis of the molecular mechanism underlying the effects of GQDs based on cellular-level experiments is insufficient. Therefore, N-GQDs with inherent excellent, broad-spectrum antibacterial efficacy under acidic conditions were successfully synthesized. Then, via multi-omics analyses, the antibacterial mechanisms of the N-GQDs were found to not only involve generation ROS but also be associated with changes in osmotic pressure, interference with nucleic acid synthesis and inhibition of energy metabolism. More surprisingly, the N-GQDs could destroy intracellular acid-base homeostasis, causing bacterial cell death. In conclusion, this study provides important insights into the antibacterial mechanism of GQDs, offering a basis for the engineering design of antibacterial nanomaterials.

Highly Efficient Antibacterial Polymer Composites Based on Hydrophobic Riboflavin Carbon Polymerized Dots

Development of new types of antimicrobial coatings is of utmost importance due to increasing problems with pathogen transmission from various infectious surfaces to human beings. In this study, new types of highly potent antimicrobial polyurethane composite films encapsulated by hydrophobic riboflavin-based carbon polymer dots are presented. Detailed structural, optical, antimicrobial, and cytotoxic investigations of these composites were conducted. Low-power blue light triggered the composites to eradicate Escherichia coli in 30 min, whereas the same effect toward Staphylococcus aureus was reached after 60 min. These composites also show low toxicity against MRC-5 cells. In this way, RF-CPD composites can be used for sterilization of highly touched objects in the healthcare industry.

Light-Activated Modified Arginine Carbon Dots as Antibacterial Particles

Nitrogen-doped arginine carbon dots (Arg CDs) as light-sensitive antibacterial agents were prepared by using citric acid as the carbon source and arginine amino acid as the nitrogen source via a microwave-assisted synthesis method. Dynamic light scattering (DLS) measurements and TEM images revealed that the Arg CDs were in the 1–10 nm size range with a graphitic structure. To improve their antibacterial capability, the Arg CDs were modified with ethyleneimine (EDA), pentaethylenehexamine (PEHA), and polyethyleneimine (PEI) as different amine sources, and the zeta potential value of +2.8 ± 0.6 mV for Arg CDs was increased to +34.4 ± 4.1 mV for PEI-modified Arg CDs. The fluorescence intensity of the Arg CDs was significantly enhanced after the modification with EDA, and the highest antibacterial effect was observed for the PEI-modified Arg CDs. Furthermore, the photodynamic antibacterial capacity of bare and EDA-modified Arg CDs was determined upon light exposure to show their light-induced antibacterial effects. Photoexcited (315–400 nm, UVA, 300 W), EDA-modified Arg CDs at 5 mg/mL concentration were found to inhibit about 49 ± 7% of pathogenic bacteria, e.g., Escherichia coli, with 5 min of light exposure. Furthermore, the biocompatibilities of the bare and modified Arg CDs were also investigated with blood compatibility tests via hemolysis and blood clotting assays and cytotoxicity analysis on L929 fibroblast cells.

Carbon Dots for Killing Microorganisms: An Update since 2019

Frequent bacterial/fungal infections and occurrence of antibiotic resistance pose increasing threats to the public and thus require the development of new antibacterial/antifungal agents and strategies. Carbon dots (CDs) have been well demonstrated to be promising and potent antimicrobial nanomaterials and serve as potential alternatives to conventional antibiotics. In recent years, great efforts have been made by many researchers to develop new carbon dot-based antimicrobial agents to combat microbial infections. Here, as an update to our previous relevant review (C 2019, 5, 33), we summarize the recent achievements in the utilization of CDs for microbial inactivation. We review four kinds of antimicrobial CDs including nitrogen-doped CDs, metal-containing CDs, antibiotic-conjugated CDs, and photoresponsive CDs in terms of their starting materials, synthetic route, surface functionalization, antimicrobial ability, and the related antimicrobial mechanism if available. In addition, we summarize the emerging applications of CD-related antimicrobial materials in medical and industry fields. Finally, we discuss the existing challenges of antimicrobial CDs and the future research directions that are worth exploring. We believe that this review provides a comprehensive overview of the recent advances in antimicrobial CDs and may inspire the development of new CDs with desirable antimicrobial activities.

Enhanced photocatalytic activity of Fe2O3@ZnO decorated CQD for inactivation of Escherichia coli under visible light irradiation

The present study, magnetically separable Fe₂O₃@ZnO/CQD nanocomposite was successfully prepared via hydrothermal process and characterized with SEM-EDX, XRD, FTIR, VSM and DRS analysis. The effect of operational parameters includes photocatalyst dosage, photocatalyst type, CQD content and Escherichia coli (E. coli) concentration were evaluated on the E. coli inactivation. The disinfecting ability of nanocomposite components was obtained as Fe₂O₃@ZnO/CQD> Fe₂O₃@ZnO> ZnO> Fe₂O₃> CQD which shows a synergetic effect among different components. The highest E. coli inactivation rate (K_max=0.7606 min^-1) was obtained at photocatalyst dosage of 0.2 g/L and 15% CQD content. The MIC and MBC values value for E. coli were determined 0.1172 mg/mL and 0.4948 respectively that the results tests proved the antibacterial functions of the Fe₂O₃@ZnO/CQD. Nanocomposite showed the high reusability after 4 consecutive cycles, K_max decreased from 0.7606 min^-1 to 0.6181 min^-1. Quenching experiments showed ^•OH and h⁺ are the main reactive oxygen species involved in the E. coli inactivation.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Quaternized carbon quantum dots with broad-spectrum antibacterial activity for the treatment of wounds infected with mixed bacteria

Bacterial resistance to antibiotics have become one of the most severe threats in global public health, so the development of new-style antimicrobial agents is urgent. In this work, quaternized carbon quantum dots (qCQDs) with broad-spectrum antibacterial activity were synthesized by a simple green "one-pot" method using dimethyl diallyl ammonium chloride and glucose as reaction precursors. The qCQDs displayed satisfactory antibacterial activity against both Gram-positive and gram-negative bacteria. In rat models of wounds infected with mixed bacteria, qCQDs obviously restored the weight of rats, significantly reduced the death of rats from severe infection, and promoted the recovery and healing of infected wounds. Biosafety tests confirmed that qCQDs had no obvious toxic and side effects during the testing stage. The analysis of quantitative proteomics revealed that qCQDs mainly acted on ribosomal proteins in Staphylococcus aureus (Gram-positive bacteria) and significantly down-regulated proteins associated with citrate cycle in Escherichia coli (Gram-negative bacteria). Meanwhile, real-time quantitative PCR confirmed that the variation trend of genes corresponding to the proteins associated with ribosome and citrate cycle was consistent with the proteomic results after treatment of qCQDs, suggesting that qCQDs has a new antibacterial mechanism which is different from the reported carbon quantum dots with antibacterial action. STATEMENT OF SIGNIFICANCE: With the development of the research on carbon quantum dots, the application of carbon quantum dots in the field of medicine has attracted extensive attention. In this paper, quaternized carbon quantum dots (qCQDs) with antimicrobial activity prepared by specific methods were studied, including antimicrobial spectrum, antimicrobial mechanism and in vivo antimicrobial application. The antimicrobial mechanism of qCQDs was studied by proteomics and RT-qRCR, and the different mechanisms of qCQDs against Gram-positive and Gram-negative bacteria were also found. This study provides a research foundation for the application of carbon quantum dots in antimicrobial field, and also expands the application range of carbon quantum dots in medicine field.

Photocatalytic nanoparticles - From membrane interactions to antimicrobial and antiviral effects

As a result of increasing resistance among pathogens against antibiotics and anti-viral therapeutics, nanomaterials are attracting current interest as antimicrobial agents. Such materials offer triggered functionalities to combat challenging infections, based on either direct membrane action, effects of released ions, thermal shock induced by either light or magnetic fields, or oxidative photocatalysis. In the present overview, we focus on photocatalytic antimicrobial effects, in which light exposure triggers generation of reactive oxygen species. These, in turn, cause oxidative damage to key components in bacteria and viruses, including lipid membranes, lipopolysaccharides, proteins, and DNA/RNA. While an increasing body of studies demonstrate that potent antimicrobial effects can be achieved by photocatalytic nanomaterials, understanding of the mechanistic foundation underlying such effects is still in its infancy. Addressing this, we here provide an overview of the current understanding of the interaction of photocatalytic nanomaterials with pathogen membranes and membrane components, and how this translates into antibacterial and antiviral effects.

Antimicrobial Photodynamic Therapy: Latest Developments with a Focus on Combinatory Strategies

Antimicrobial photodynamic therapy (aPDT) has become a fundamental tool in modern therapeutics, notably due to the expanding versatility of photosensitizers (PSs) and the numerous possibilities to combine aPDT with other antimicrobial treatments to combat localized infections. After revisiting the basic principles of aPDT, this review first highlights the current state of the art of curative or preventive aPDT applications with relevant clinical trials. In addition, the most recent developments in photochemistry and photophysics as well as advanced carrier systems in the context of aPDT are provided, with a focus on the latest generations of efficient and versatile PSs and the progress towards hybrid-multicomponent systems. In particular, deeper insight into combinatory aPDT approaches is afforded, involving non-radiative or other light-based modalities. Selected aPDT perspectives are outlined, pointing out new strategies to target and treat microorganisms. Finally, the review works out the evolution of the conceptually simple PDT methodology towards a much more sophisticated, integrated, and innovative technology as an important element of potent antimicrobial strategies.

Effective Treatment against ESBL-Producing Klebsiella pneumoniae through Synergism of the Photodynamic Activity of Re (I) Compounds with Beta-Lactams

BACKGROUND

Extended-spectrum beta-lactamase (ESBL) and carbapenemase (KPC+) producing Klebsiella pneumoniae are multidrug-resistant bacteria (MDR) with the highest risk to human health. The significant reduction of new antibiotics development can be overcome by complementing with alternative therapies, such as antimicrobial photodynamic therapy (aPDI). Through photosensitizer (PS) compounds, aPDI produces local oxidative stress-activated by light (photooxidative stress), nonspecifically killing bacteria.

METHODOLOGY

Bimetallic Re(I)-based compounds, PSRe-µL1 and PSRe-µL2, were tested in aPDI and compared with a Ru(II)-based PS positive control. The ability of PSRe-µL1 and PSRe-µL2 to inhibit K. pneumoniae was evaluated under a photon flux of 17 µW/cm2. In addition, an improved aPDI effect with imipenem on KPC+ bacteria and a synergistic effect with cefotaxime on ESBL producers of a collection of 118 clinical isolates of K. pneumoniae was determined. Furthermore, trypan blue exclusion assays determined the PS cytotoxicity on mammalian cells.

RESULTS

At a minimum dose of 4 µg/mL, both the PSRe-µL1 and PSRe-µL2 significantly inhibited in 3log10 (>99.9%) the bacterial growth and showed a lethality of 60 and 30 min of light exposure, respectively. Furthermore, they were active on clinical isolates of K. pneumoniae at 3-6 log10. Additionally, a remarkably increased effectiveness of aPDI was observed over KPC+ bacteria when mixed with imipenem, and a synergistic effect from 3 to 6log10 over ESBL producers of K. pneumoniae clinic isolates when mixed with cefotaxime was determined for both PSs. Furthermore, the compounds show no dark toxicity and low light-dependent toxicity in vitro to mammalian HEp-2 and HEK293 cells.

CONCLUSION

Compounds PSRe-µL1 and PSRe-µL2 produce an effective and synergistic aPDI effect on KPC+, ESBL, and clinical isolates of K. pneumoniae and have low cytotoxicity in mammalian cells.

Antibacterial photodynamic activity of hydrophobic carbon quantum dots and polycaprolactone based nanocomposite processed via both electrospinning and solvent casting method

Inhabitation of various types of bacteria on different surfaces causes vital health problems worldwide. In this work, a wound dressing defeating bacterial infection had been fabricated. The antibacterial effect of polycaprolactone and hydrophobic carbon quantum dots (hCQDs) based nanocomposite has been presented. The nanocomposite was fabricated both via solvent casting and electrospinning method. Nanocomposites with and without hCQDs had been investigated. A detailed study on their morphology and surface properties were performed by scanning electron microscopy, atomic force microscopy and Raman spectroscopy. Prepared nanocomposites had been evaluated by the contact angle, UV-Vis spectroscopy, electron paramagnetic resonance spectroscopy, and antibacterial activity. It was found that nanocomposites were able to produce singlet oxygen upon blue light irradiation at 470 nm, and they were effective in the eradication of Gram positive (Staphylococcus aureus, Listeria monocytogenes) and Gram negative (Escherichia coli, Klebsiella pneumoniae) bacteria.

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.

Synthesis and characterization of lysozyme-conjugated Ag.ZnO@HA nanocomposite: A redox and pH-responsive antimicrobial agent with photocatalytic activity

Hydroxyapatite (HA) is extensively used for implantable device coating; however, it lacks antibacterial property, leading to potential bacterial infection during orthopedic implantation surgery. Herein, to enhance the antibacterial activity of HA, a redox- and pH-responsive HA nanocomposite with photocatalytic activity was designed. A photosensitive heterostructure, zinc oxide/hydroxyapatite (ZnO.HA), was coated with Ag nanoparticles (AgNPs) with assisted gallic acid using the UV-irradiation method. An antibacterial enzyme, lysozyme, was then conjugated on the surface of the nanocomposite by a cleavable disulfide linker, resulting in a redox-sensitive nanoplatform. In comparison with bare HA, the designed nanocomposites as Lyso.CAGZ@HA displayed much higher antibacterial activity (> 5-fold) toward Escherichia coli (E. coli) owing to the synergistic antibacterial effects of ZnONPs, AgNPs, gallic acid, and lysozyme on the surface of the nanocomposite. However, antibacterial and antifouling effects are much more enhanced in Lyso.CAGZ@HA-treated bacteria as they were subjected to UVA irradiation. Moreover, the cellular uptake of nanocomposite and intracellular glutathione depletion enhanced in the presence of UVA light, resulting in reactive oxygen specious generation enhancement. Further, in vitro cytotoxicity experiments on mammalian cells (human foreskin fibroblast) revealed that nanocomposite has no cytotoxic effects. Hence, this study demonstrated that Lyso.CAGZ@HA could be considered as a potential therapeutic approach against bacterial infectious diseases.

One-Pot Microwave-Assisted Synthesis of Carbon Dots and in vivo and in vitro Antimicrobial Photodynamic Applications

Carbon-based photosensitizers are more attractive than the other ones based on their low cost, high stability, broadband of light absorption, tunable emission spectra, high quantum yield, water solubility, high resistance to metabolic degradation, and selective delivery. These properties allow multiple applications in the field of biology and medicine. The present study evaluated in vitro and in vivo the antimicrobial photodynamic effect of a one-pot microwave produced C-DOTS based on citric acid. The in vitro assays assessed the effectiveness of illuminated C-DOTS (C-DOTS + light) against Staphylococcus aureus suspension and biofilm. The concentrations of 6.9 and 13.8 mg/mL of C-DOTS and light doses of 20 and 40 J/cm2 were able to reduce significantly the microorganisms. Based on these parameters and results, the in vivo experiments were conducted in mice, evaluating this treatment on wounds contaminated with S. aureus. The viability test showed that C-DOTS-mediated photodynamic inactivation reduced 104 log of the bacteria present on the skin lesions. These results, altogether, showed that antibacterial photodynamic therapy using C-DOTS is a promising and viable treatment for Gram-positive bacteria-infected wounds.

Size effect of hybrid carbon nanofillers on the synergetic enhancement of the properties of HDPE-based nanocomposites

High-density polyethylene (HDPE)-based hybrid nanocomposites containing graphene nanoplatelets (GnPs) and multiwall carbon nanotubes (MWCNTs) were fabricated using melt mixing followed by compression molding. The influences of size and weight ratio of both carbon-based nanofillers on the electrical, thermal, and mechanical properties of hybrid nanocomposites were evaluated. This study proves that the size and weight ratio of carbon-based nanofillers play a critical role in determining these properties. The optimum size and weight ratio of GnPs and MWCNTs are determined at the maximum achieved enhancement for each property. The HDPE-based nanocomposites containing GnPs with larger surface area and MWCNTs with higher aspect ratio display the highest electrical conductivity at GnPs/MWCNTs weight ratio of 2/3. The combination of GnPs with larger surface area and MWCNTs with lower aspect ratio provides the maximum Young's modulus enhancement of hybrid nanocomposites at 1/4 weight ratio of GnPs and MWCNTs. The nanocomposite containing GnPs with the largest lateral size and MWCNTs with a higher aspect ratio at a 3/2 weight ratio exhibits the highest thermal conductivity. Also, at around the percolation threshold of GnPs, the incorporation of MWCNTs with larger aspect ratio into the HDPE-based nanocomposites containing GnPs with the largest lateral size shows a distinct synergic effect on the thermal conductivity and Young's modulus, while an additive effect on the electrical conductivity and thermal stability.

Photo induced mechanistic activity of GO/Zn(Cu)O nanocomposite against infectious pathogens: Potential application in wound healing

Treating infection causing microorganisms is one of the major challenges in wound healing. These may gain resistance due to the overuse of conventional antibiotics. A promising technique is antimicrobial photodynamic therapy (aPDT) used to selectively cause damage to infectious pathogenic cells via generation of reactive oxygen species (ROS). We report on biocompatable nanomaterials that can serve as potential photosensitizers for aPDT. GO/Zn(Cu)O nanocomposite was synthesized by co-precipitation method. Graphene Oxide (GO) is known for its high surface to volume ratio, excellent surface functionality and enhanced antimicrobial property. ZnO nanoparticle induces the generation of reactive oxygen species (ROS) under light irradiation and it leads to recombination of electron-hole pair. Nanocomposites of GO and Cu doped ZnO increases visible light absorption and enhances the photocatalytic property. It generates more ROS and increases the bacterial inhibition. GO/Zn(Cu)O nanocomposite was tested against Staphylococcus aureus (S. aureus), Enterococcus faecium (E. faecium), Escherichia coli (E. coli), Salmonella typhi (S. typhi), Shigella flexneri (S. flexneri) and Pseudomonas aeruginosa (P. aeruginosa) by well diffusion method, growth curve, colony count, biofilm formation under both dark and visible light condition. Reactive Oxygen Species assay (ROS), Lactate dehydrogenase leakage (LDH) assay, Protein estimation assay and membrane integrity study proves the mechanism of inhibition of bacteria. Inhibition kinetics shows the sensitivity between bacteria and GO/Zn(Cu)O nanocomposite.

Synthesis and characterization of cotton-silver-graphene quantum dots (cotton/Ag/GQDs) nanocomposite as a new antibacterial nanopad

Appearance of antibiotic resistance in bacteria is a convoluted topic, particularly in treating pestiferous immunodeficiency correlated diseases. The main objective of the current research is to fabricate antibacterial pads by utilizing of graphene quantum dots (GQDs) as a linker, stabilizing, and reduction agent of in situ synthesized Ag nanoparticles (Ag NPs) on cotton pad. Five different antibacterial pads including cotton/Ag pad, cotton/GQDs/Ag pad, cotton/Ag/GQDs pad, cotton/GQDs/Ag/GQDs pad, and cotton/Ag/GQDs/Ag were fabricated and their antibacterial activities were compared to those of as-synthesized Ag/GQDs nanocomposites. The results indicate that cotton/GQDs/Ag pad shows a very promising minimum inhibitory concentration(MIC) of 0.09 and 0.01 against S. aureus and E. coli, respectively. Using GQDs as a linker (cotton/GQDs/Ag) and as a stabilizing agent (cotton/Ag/GQDs) significantly improves the antibacterial activity of Ag NPs.

Application of EPR to porphyrin-protein agents for photodynamic therapy

Recently, a new type of spin labels based on photoexcited triplet molecules was proposed for nanometer scale distance measurements by pulsed dipolar electron paramagnetic resonance (PD EPR). However, such molecules are also actively used within biological complexes as photosensitizers for photodynamic therapy (PDT) of cancer. Up to date, the idea of using the photoexcited triplets simultaneously as PDT agents and as spin labels for PD EPR has never been employed. In this work, we demonstrate that PD EPR in conjunction with other methods provides valuable information on the structure and function of PDT candidate complexes, exemplified here with porphyrins bound to human serum albumin (HSA). Two distinct porphyrins with different properties were used: amphiphilic meso-tetrakis(4-hydroxyphenyl)porphyrin (mTHPP) and water soluble cationic meso-tetrakis(N-methyl-4-pyridyl)porphyrin (TMPyP4); HSA was singly nitroxide-labeled to provide a second tag for PD EPR measurements. We found that TMPyP4 locates in a cavity at the center of the four-helix bundle of HSA subdomain IB, close to the interface with solvent, thus being readily accessible to oxygen. As a result, the photolysis of the complex leads to photooxidation of HSA by generated singlet oxygen and causes structural perturbation of the protein. Contrary, in case of mTHPP porphyrin, the binding occurs at the proton-rich pocket of HSA subdomain IIIA, where the access of oxygen to a photosensitizer is hindered. Structural data of PD EPR were supported by other EPR techniques, laser flash photolysis and protein photocleavage studies. Therefore, pulsed EPR on complexes of proteins with photoexcited triplets is a promising approach for gaining structural and functional insights into such PDT agents.

Functionalized carbon-based nanomaterials and quantum dots with antibacterial activity: a review

INTRODUCTION

Emergence of antibiotic resistance in bacteria is a complicated issue, especially when treating infectious immunodeficiency related diseases. In recent years, when compared to bulk materials, nanomaterials (NMs) with specific antibacterial activities have played a novel role in treating bacterial infections. Among NMs, quantum dots (QDs), specifically carbon containing QDs including graphene oxide QD (GOQD), graphene QD (GQD), and carbon QD (CQD), have demonstrated bacteriostatic and bactericidal activities via photodynamic (PD) effects against antibiotic resistant bacteria under a certain wavelength of light.

AREA COVERED

In this mini-review, recent advances and challenges related to antibacterial and biocompatibility activities of modified GQD, GOQD, CQD, and carbon nanotubes (CNTs) are discussed.

EXPERT OPINION

Lower stability and biocompatibility of QDs at higher doses in physiological conditions are major disadvantages. In this regard, functionalization of these QDs can result in appropriate bactericidal, biocompatibility, and biodegradability properties. In the case of CNTs including single-wall carbon nanotube (SWCNTs) and multiwall carbon nanotube (MWCNTs), aspect ratio (AR) is a determinant factor for the antibacterial value. Moreover, MWCNTs show a lower antibacterial ability compared to SWCNTs, which can be improved by modifying their surface.

Photodynamic-active smart biocompatible material for an antibacterial surface coating

Here we present a new effective antibacterial material suitable for a coating, e.g., surface treatment of textiles, which is also time and financially undemanding. The most important role is played by hydrophobic carbon quantum dots, as a new type of photosensitizer, produced by carbonization of different carbon precursors, which are incorporated by swelling from solution into various polymer matrices in the form of thin films, in particular polyurethanes, which are currently commercially used for industrial surface treatment of textiles. The role of hydrophobic carbon quantum dots is to work as photosensitizers upon irradiation and produce reactive oxygen species, namely singlet oxygen, which is already known as the most effective radical for elimination different kinds of bacteria on the surface or in close proximity to such modified material. Therefore, we have mainly studied the effect of hydrophobic carbon quantum dots on Staphylococcus aureus and the cytotoxicity tests, which are essential for the safe handling of such material. Also, the production of singlet oxygen by several methods (electron paramagnetic spectroscopy, time-resolved near-infrared spectroscopy), surface structures (atomic force microscopy and contact angle measurement), and the effect of radiation on polymer matrices were studied. The prepared material is easily modulated by end-user requirements.

Langmuir films of low-dimensional nanomaterials

A large number of low-dimensional nanomaterials having different shapes and being dispersible in solvents open a fundamental question if there is a universal deposition technique for the monolayer formation. A monolayer formation of various nanomaterials at the air-water interface, also known as a Langmuir film, is a well-established technique even for the large group of the recently developed low-dimensional nanomaterials. In this review, we cover the monolayer formation of the zero-dimensional, one-dimensional and two-dimensional nanomaterials. Thanks to the formation of a Langmuir layer at the thermodynamic equilibrium, by using a suitable nanomaterial dispersion and subphase, the monolayers can be formed from all kinds of materials, ranging from the graphene oxide to the semiconducting quantum dots. In this review, we will discuss the basic requirements for the successful formation of monolayers and summarize the recent scientific advances in the field of Langmuir films.

A review of carbon quantum dots and their applications in wastewater treatment

Carbon quantum dots (CQDs) are a fascinating class of carbon nanoparticles with sizes around 10 nm. The unique properties of CQDs are low toxicity, chemical inertness, excellent biocompatibility, photo-induced electron transfer and highly tunable photoluminescence behaviour. Sustainable raw materials are commonly used for the fabrication of CQDs because they are cost-effective, eco-friendly and effective to minimise waste production. CQDs can be fabricated using laser ablation, microwave irradiation, hydrothermal reaction, electrochemical oxidation, reflux method and ultrasonication. These methods undergo several chemical reactions such as oxidation, carbonisation, pyrolysis and polymerisation processes to produce CQDs. Due to small particle sizes of CQDs, they possess strong tunable fluorescent properties and highly photo-luminescent emissions. It also contains oxygen-based functional groups and highly desired properties as semiconductor nanoparticles. Therefore, CQDs are promising nanomaterials for photo-catalysis, ions sensing, biological imaging, heavy metal detection, adsorption treatment, supercapacitor, membrane fabrication and water pollution treatment. This review paper will discuss the physical and chemical properties of CQDs, raw materials and methods used in the fabrication of CQDs, the stability of CQDs as well as their potential applications in wastewater treatment and biomedical field.

Lactic-co-glycolic acid-coated methylene blue nanoparticles with enhanced antibacterial activity for efficient wound healing

Effective wound healing has been demonstrated using lactic-co-glycolic acid (PLGA)-coated methylene blue nanoparticles (MPNPs) as a novel susceptible agent for photodynamic antibacterial therapy. Compared with methylene blue (MB) solution, MPNPs have a significantly improved antibacterial effect in vitro and in vivo. The enhanced antibacterial effect is achieved through increased singlet oxygen generation in MPNPs compared to that of MB solution, as a result of the decreased aggregation-induced quenching (ACQ) effect of the MPNPs. The mouse skin infection model experiment proved that MPNP has good antibacterial effects and promotes wound healing.

Recent Developments in Synthesis and Photocatalytic Applications of Carbon Dots

The tunable photoluminescent and photocatalytic properties of carbon dots (CDs) via chemical surface modification have drawn increased attention to this emerging class of carbon nanomaterials. Herein, we summarize the advances in CD synthesis and modification, with a focus on surface functionalization, element doping, passivation, and nanocomposite formation with metal oxides, transition metal chalcogenides, or graphitic carbon nitrides. The effects of CD size and functionalization on photocatalytic properties are discussed, along with the photocatalytic applications of CDs in energy conversion, water splitting, hydrogen evolution, water treatment, and chemical degradation. In particular, the enzyme-mimetic and photodynamic applications of CDs for bio-related uses are thoroughly reviewed.

Photodynamic treatment for multidrug-resistant Gram-negative bacteria: Perspectives for the treatment of Klebsiella pneumoniae infections

The emergence of multi-drug resistance for pathogenic bacteria is one of the most pressing global threats to human health in the 21st century. Hence, the availability of new treatment becomes indispensable to prevent morbidity and mortality caused by infectious agents. This article reviews the antimicrobial properties of photodynamic therapy (PDT), which is based on the use of photosensitizers compounds (PSs). The PSs are non-toxic small molecules, which induce oxidative stress only under excitation with light. Then, the PDT has the advantage to be locally activated using phototherapy devices. We focus on PDT for the Klebsiella pneumoniae, as an example of Gram-negative bacteria, due to its relevance as an agent of health-associated infections (HAI) and a multi-drug resistant bacteria. K. pneumoniae is a fermentative bacillus, member of the Enterobacteriaceae family, which is most commonly associated with producing infection of the urinary tract (UTI) and pneumonia. K. pneumoniae infections may occur in deep organs such as bladder or lungs tissues; therefore, activating light must get access or penetrate tissues with sufficient power to produce effective PDT. Consequently, the rationale for selecting the most appropriate PSs, as well as photodynamic devices and photon fluence doses, were reviewed. Also, the mechanisms by which PDT activates the immune system and its importance to eradicate the infection successfully, are discussed.