Isolation of recombinant Hepatitis B surface antigen with antibody-conjugated superparamagnetic Fe3O4/SiO2 core-shell nanoparticles

Highly efficient strategy of lipopolysaccharide (LPS) decontamination from rHBsAg: synergistic effect of enhanced magnetic nanoparticles (MNPs) as an LPS affinity adsorbent (LAA) and surfactant as a dissociation factor

The interaction of lipopolysaccharide with a recombinant protein is a serious bottleneck, particularly in the purification step of bioprocessing. Recombinant hepatitis B surface antigen (rHBsAg), the active ingredient of the hepatitis B vaccine, is probably contaminated by extrinsic LPS like other biopharmaceuticals. This research intends to eliminate LPS from its mixture with rHBsAg efficiently. Immobilized polymyxin B on magnetic nanoparticles (PMB-MNPs) was synthesized and implemented as an enhanced LPS affinity adsorbent (LAA). The 20-80 EU/dose binary samples with and without surfactant were applied to PMB-MNPs. Formerly, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were examined on the samples to qualitatively show the dissociation effect of the surfactant. Considering the high potential interaction of LPS with HBsAg, the dissociation effects of 0.5 and 1.5% Tween 20 on the binary samples were assessed using immunoaffinity chromatography (IAC) as a quantification tool. The dissociation effect of Tween 20 substantially diminished the interaction, leading to a proportional increase of free LPS up to 66%. The synergetic effect of Tween 20 and privileged LAA was highly effective in eliminating more than 80% of LPS with a remarkable LPS clearance factor of 5.8 and a substantial protein recovery rate of 97%.

MRI Tracking of Marine Proliferating Cells In Vivo Using Anti-Oct4 Antibody-Conjugated Iron Nanoparticles for Precision in Regenerative Medicine

Marine invertebrates are multicellular organisms consisting of a wide range of marine environmental species. Unlike vertebrates, including humans, one of the challenges in identifying and tracking invertebrate stem cells is the lack of a specific marker. Labeling stem cells with magnetic particles provides a non-invasive, in vivo tracking method using MRI. This study suggests antibody-conjugated iron nanoparticles (NPs), which are detectable with MRI for in vivo tracking, to detect stem cell proliferation using the Oct4 receptor as a marker of stem cells. In the first phase, iron NPs were fabricated, and their successful synthesis was confirmed using FTIR spectroscopy. Next, the Alexa Fluor anti-Oct4 antibody was conjugated with as-synthesized NPs. Their affinity to the cell surface marker in fresh and saltwater conditions was confirmed using two types of cells, murine mesenchymal stromal/stem cell culture and sea anemone stem cells. For this purpose, 106 cells of each type were exposed to NP-conjugated antibodies and their affinity to antibodies was confirmed by an epi-fluorescent microscope. The presence of iron-NPs imaged with the light microscope was confirmed by iron staining using Prussian blue stain. Next, anti-Oct4 antibodies conjugated with iron NPs were injected into a brittle star, and proliferating cells were tracked by MRI. To sum up, anti-Oct4 antibodies conjugated with iron NPs not only have the potential for identifying proliferating stem cells in different cell culture conditions of sea anemone and mouse cell cultures but also has the potential to be used for in vivo MRI tracking of marine proliferating cells.

Fabrication and characterization of the Fe3O4@SiO2-rGO nanocomposite: a catalyst for multi-component reactions

A novel nanocomposite is synthesized by covalently modifying reduced graphene oxide (rGO) with Fe₃O₄@SiO₂ nanoparticles. Fe₃O₄ was synthesized using a co-precipitation method, and SiO₂ was then coated onto the Fe₃O₄via a sol-gel method. Graphene oxide was synthesized using the Hummers' method. Furthermore, a hydrothermal method was applied to create the Fe₃O₄@SiO₂-GO composite, and a simple reduction was used to obtain three-dimensional (3D) Fe₃O₄@SiO₂-rGO core-shell spheres. XRD, FTIR, FE-SEM, VSM, BET, TGA, and Raman analyses were used to characterize the prepared nanocomposites. X-Ray diffraction (XRD) and Raman spectra reveal that the nanostructures consist of highly crystallized cubic Fe₃O₄, amorphous SiO₂, and rGO sheets stacked in a disordered fashion. Field emission scanning electron microscopy (FE-SEM) characterization indicates that the form of the Fe₃O₄@SiO₂ core-shell structures is spherical, with an average size of about 25 nm. Magnetic hysteresis loops reveal the super-paramagnetic behavior of the samples at room temperature. All of the results obtained confirm the synthesis of high-quality nanocomposites, which can be a good candidate for use as a catalyst in multi-component reactions.

Magnetic Nanoparticles for Protein Separation and Purification

Proteins are essential for various functions such as brain activity and muscle contraction in humans. Even though food is a source of proteins, the bioavailability of proteins in most foods is usually limited due to matrix interaction with other biomolecules. Thus, it is essential to extract these proteins and provide them as a nutraceutical supplement to maintain protein levels and avoid protein deficiency. Hence, protein purification and extraction from natural sources are highly significant in biomedical applications. Chromatography, crude mechanical disruption, use of extractive chemicals, and electrophoresis are some of the methods applied to isolate specific proteins. Even though these methods possess several advantages, they are unable to extract specific proteins with high purity. A suitable alternative is the use of nanoparticles, which can be beneficial in protein purification and extraction. Notably, magnetic iron and iron-based nanoparticles have been employed in protein extraction processes and can be reused via demagnetization due to their magnetic property, smaller size, morphology, high surface-to-volume ratio, and surface charge-mediated property. This chapter is a summary of various magnetic nanoparticles (MNPs) that can be used for the biomolecular separation of proteins.

From Synthetic Route of Silica Nanoparticles to Theranostic Applications

The advancements in nanotechnology have quickly developed a new subject with vast applications of nanostructured materials in medicine and pharmaceuticals. The enormous surface-to-volume ratio, ease of surface modification, outstanding biocompatibility, and, in the case of mesoporous nanoparticles, the tunable pore size make the silica nanoparticles (SNPs) a promising candidate for nano-based medical applications. The preparation of SNPs and their contemporary usage as drug carriers, contrast agents for imaging, carrier of photosensitizers (PS) in photodynamic, as well as photothermal treatments are intensely discussed in this review. Furthermore, the potential harmful responses of silica nanoparticles are reviewed using data obtained from in vitro and in vivo experiments conducted by several studies. Moreover, we showcase the engineering of SNPs for the theranostic applications that can address several intrinsic limitations of conventional therapeutics and diagnostics. In the end, a personal perspective was outlined to state SNPs’ current status and future directions, focusing on SNPs’ significant potentiality and opportunities.

Progress in affinity ligand-functionalized bacterial magnetosome nanoparticles for bio-immunomagnetic separation of HBsAg protein

Efficient Bio-immunomagnetic separation (BIMS) of recombinant hepatitis B surface antigen (rHBsAg) with high binding capacity was studied using affinity ligand immobilized bacterial magnetosome nanoparticles (Magnetospirillum gryphiswaldense strain MSR-1 bacteria) as an immunomagnetic sorbent. Our results showed immunomagnetic adsorption, acted by affinity interactions with the immobilized monoclonal antibody, offered higher antigen adsorption and desorption capacities as compared with the commercially available immunoaffinity sorbents. Four different ligand densities of the Hep-1 monoclonal antibody were examined during covalent immobilization on Pyridyl Disulfide-functionalized magnetosome nanoparticles for HBsAg immunomagnetic separation. The average of adsorption capacity was measured as 3 mg/ml in optimized immunomagnetic sorbent (1.056 mg rHBsAg/ml immunomagneticsorbent/5.5 mg of total purified protein) and 5mg/ml in immunoaffinity sorbent (0.876 mg rHBsAg/ml immunosorbent/5.5 mg total purified protein during 8 runs. Immunomagnetic sorbent demonstrated ligand leakage levels below 3 ng Mab/Ag rHBsAg during 12 consecutive cycles of immunomagnetic separation (IMS). The results suggest that an immunomagnetic sorbent with a lower ligand density (LD = 3 mg Mab/ml matrix) could be the best substitute for the immunosorbent used in affinity purification of r-HBsAg there are significant differences in the ligand density (98.59% (p-value = 0.0182)), adsorption capacity (97.051% (p-value = 0.01834)), desorption capacity (96.06% (p-value = 0.036)) and recovery (98.97% (p-value = 0.0231)). This study indicates that the immunosorbent approach reduces the cost of purification of Hep-1 protein up to 50% as compared with 5 mg Mab/ml immunoaffinity sorbent, which is currently used in large-scale production. As well, these results demonstrate that bacterial magnetosome nanoparticles (BMs) represent a promising alternative product for the economical and efficient immobilization of proteins and the immunomagnetic separation of Biomolecules, promoting innovation in downstream processing.

Application of a 3D printed miniaturized hydrocyclone in biopharmaceutical industry-numerical and experimental studies of yeast separation from fermentation culture media

Various industries ranging from water purification to pharmaceutical production have experienced multi separation steps that impose more process time and contamination possibility by batch operation. We propose a developed microfluidic particle sorter (miniaturized hydrocyclone) that adopts centrifugal force as it has ability to decline the number of separation steps and the risk of extrinsic contamination in continuous process. While biological industries have not relied on mini hydrocyclones considerably because of low efficiency and microfabrication difficulties, current work has been planned to conquer these obstacles. In this research, biomass separation from fermentation broth by 3 mm hydrocyclones was investigated. The effect of apex size, feed flow rate, hydrocyclone geometry were analyzed numerically in four mini-hydrocyclones. The most efficient mini-hydrocyclone was chosen to be made by elegant additive manufacturing technology and studied experimentally. The separation efficiency was achieved up to 90% while the concentration ratio of heavy stream (apex) to dilute stream (vortex finder) was reached more than twofold. The mini hydrocyclone performance in view of energy target was studied by Euler-Reynolds-Efficiency plots. The 4 μm cut size was achieved that is promising high throughput separation for biological particles.

Isolation of HLA-G+ cells using MEM-G/9 antibody-conjugated magnetic nanoparticles for prenatal screening: a reliable, fast and efficient method

The development of an effective and noninvasive early method for obtaining fetal cells is crucial to prenatal screening. Despite proving the presence of fetal cells in the reproductive tract, their use is limited due to their inability to properly isolate them from maternal cells. Magnetic-activated cell sorting (MACS) is a simple technique to separate cells. The present study aimed to develop a MACS-based platform for the isolation of the HLA-G expressing trophoblast cells. For this purpose, first, the triazine functionalized MNPs were synthesized and characterized. Then, MNPs were directly and indirectly conjugated by the MEM-G/9 antibodies targeting HLA-G+ cells. The antibody amount on the surface of the nanoparticles was determined with the Bradford assay. The cell capture efficiency was also investigated. Various characterization methods confirmed the successful nanoparticle synthesis and antibody conjugation. The optimal initial antibody amount for the immobilization was about 20 μg and the optimal time was 3 h. The antibody-nanoparticles by the indirect method had better targeting and capture efficiency than the direct method. The MNPs indirectly conjugated with antibodies are an efficient tool for cell isolation and present considerable potential to be applied in biomedical fields.

Conjugation strategies on functionalized iron oxide nanoparticles as a malaria vaccine delivery system

Vaccination has been used effectively to protect from infectious diseases and non-infectious diseases such as cancer and allergies. Different forms of particulate arrangements, including nanoparticles, virus-like particles (VLPs), and virosomes, have been built recently depending on the type of pathogen to be targeted. The ability to conjugate the recombinant Plasmodium yoelii, 19-kDa C-terminal fragment of merozoite surface protein 1 (PyMSP119) on the surface of superparamagnetic magnetite nanoparticles (SPIONs) was explored as a new technique of enhancing vaccination against malaria. Different conjugation strategies were performed to correlate the effects of nanoparticle chemistry surfaces to bind later with the malaria protein. (SPIONs) were prepared by chemical coprecipitation method and coated with 3-aminopropyltriethoxysilane (APTS) alone (as a surface coater), or with both APTS and polyethylene glycol (PEG) (as a shield to protect the malaria protein from proteolytic enzymes) by using a modified silanisation method. X-ray powder diffraction (XRD, Philips Model) patterns indicated that the SPIONs were of high purity with an inverse spinal structure. Fourier Transform Infrared Spectroscopy (FTIR) was collected using PerkinElmer Spectrum 100 Series; spectra of uncoated and coated magnetite nanoparticles confirmed that the silane layer had been coated on the surface Fe3O4. The SPIONs were superparamagnetic as investigated by Vibrating Sample Magnetometry (VSM, Princeton Applied Research, model ISS) and relatively stable in aqueous phase at room temperature and could also be quickly recovered from suspension using an external magnet. Introduce the carboxyl groups onto the SPIONs surfaces, resulting in a relatively high protein binding capacity onto the nanoparticle surfaces. The bare particles had a mean size of around 20 nm with a relatively narrow size distribution. 82% of African Green Monkey fibroblast (COS-7) were alive in nanoparticle suspension using the MTT assay method. The quantity of protein explicitly bound to particles was determined using Sodium Dodecyl Sulfate (SDS) - Polyacrylamide Gel Electrophoresis (PAGE). SDS–PAGE. When the conjugation blend was prepared in EDC, there was approximately 100% binding between PyMSP119 and the Fe3O4-COOH particles because no protein band was apparent at the expected molecular weight for PyMSP119 (45 kDa). The current study investigates the theory that the gradual, persistent release of the malaria antigen may stimulate and maintain an elevated level of immune response for an extended period in vivo, which will be the scope of future work.

Silica-Coated Fe3O4 Nanoparticles as a Bifunctional Agent for Magnetic Resonance Imaging and ZnII Fluorescent Sensing

Bifunctional magnetic/fluorescent core-shell silica nanospheres (MNPs) encapsulated with the magnetic Fe₃O₄ core and a derivate of 8-amimoquinoline (N-(quinolin-8-yl)-2-(3-(triethoxysilyl) propylamino) acetamide) (QTEPA) into the shell were synthesized. These functional MNPs were prepared with a modified stöber method and the formed Fe₃O₄@SiO₂-QTEPA core-shell nanocomposites are biocompatible, water-dispersible, and stable. These prepared nanoparticles were characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), thermoelectric plasma Quad II inductively coupled plasma mass spectrometry (ICP-MS), superconducting quantum interference device (SQUID), TG/DTA thermal analyzer (TGA) and Fourier transform infrared spectroscopy (FTIR). Further application of the nanoparticles in detecting Zn²⁺ was confirmed by the fluorescence experiment: the nanosensor shows high selectivity and sensitivity to Zn²⁺ with a 22-fold fluorescence emission enhancement in the presence of 10 μM Zn²⁺. Moreover, the transverse relaxivity measurements show that the core-shell MNPs have T2 relaxivity (r2) of 155.05 mM^-1 S^-1 based on Fe concentration on the 3.0 T scanner, suggesting that the compound can be used as a negative contrast agent for MRI. Further in vivo experiments showed that these MNPs could be used as MRI contrast agent. Therefore, the new nanosensor provides the dual modality of magnetic resonance imaging and optical imaging.

Recent Advancements of Specific Functionalized Surfaces of Magnetic Nano- and Microparticles as a Theranostics Source in Biomedicine

Magnetic nano- and microparticles (MNMPs) belong to a highly versatile class of colloids with actuator and sensor properties that have been broadly studied for their application in theranostics such as molecular imaging and drug delivery. The use of advanced biocompatible, biodegradable polymers and polyelectrolytes as MNMP coating materials is essential to ensure the stability of MNMPs and enable efficient drug release while at the same time preventing cytotoxic effects. In the past years, huge progress has been made in terms of the design of MNMPs. Especially, the understanding of coating formation with respect to control of drug loading and release kinetics on the molecular level has significantly advanced. In this review, recent advancements in the field of MNMP surface engineering and the applicability of MNMPs in research fields of medical imaging, diagnosis, and nanotherapeutics are presented and discussed. Furthermore, in this review the main emphasis is put on the manipulation of biological specimens and cell trafficking, for which MNMPs represent a favorable tool enabling transport processes of drugs through cell membranes. Finally, challenges and future perspectives for applications of MNMPs as theranostic nanomaterials are discussed.

Recent Advances in Magnetite Nanoparticle Functionalization for Nanomedicine

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

Application of hydrocyclone for separation of Pichia pastoris produced r-HBsAg from fermentation culture: impact of concentration and pressure on hydrocyclone performance

Separation of biomass from culture media by centrifugation and then washing the biomass are mandatory steps in the fermentation process of recombinant Pichia pastoris expressed HBsAg intracellularly. Biomass has to be washed many times to eliminate the culture media residues thoroughly. In this study, we tried to develop the hydrocyclone as an alternative method for separation of biomass from fermentation culture, an attractive replacement for centrifugation processes. The advantages of using hydrocyclone in biomass separation could be summarized in its suitability for continuous separation and its low risk of contamination. To evaluate the performance of hydrocyclone, concentration ratio in underflow to feed stream, capacity, and centrifugal force by considering three parameters of pressure drop, concentration, and the type of hydrocyclone were investigated. Using three level factorial design a concentration ratio equation was developed, with the correlation coefficient R² = 0.977 ensured the good fitness of the predicted data with the experimental results. In optimal conditions, maximum concentration ratio was 1.246, for flow rate 13.5 LPM and C-force equal to 1276.11 at maximum pressure drop (3 bar) and minimum concentration (0.5% w/w) in hydrocyclone 1. Herein, two different hydrocyclones with the cylindrical diameters of 19 mm and 21 mm were used for separating the yeast cells.

Accurate and cost-effective prediction of HBsAg titer in industrial scale fermentation process of recombinant Pichia pastoris by using neural network based soft sensor

In the current work, the attempt was made to apply best-fitted artificial neural network (ANN) architecture and the respective training process for predicting final titer of hepatitis B surface antigen (HBsAg), produced intracellularly by recombinant Pichia pastoris Mut⁺ in the commercial scale. For this purpose, in large-scale fed-batch fermentation, using methanol for HBsAg induction and cell growth, three parameters of average specific growth rate, biomass yield, and dry biomass concentration-in the definite integral form with respect to fermentation time-were selected as input vectors; the final concentration of HBsAg was selected for the ANN output. Used dataset consists of 38 runs from previous batches; feed-forward ANN 3:5:1 with training algorithm of backpropagation based on a Bayesian regularization was trained and tested with a high degree of accuracy. Implementing the verified ANN for predicting the HBsAg titer of the five new fermentation runs, excluded from the dataset, in the full-scale production, the coefficient of regression and root-mean-square error were found to be 0.969299 and 2.716774, respectively. These results suggest that this verified soft sensor could be an excellent alternative for the current relatively expensive and time-intensive analytical techniques such as enzyme-linked immunosorbent assay in the biopharmaceutical industry.

Optimization of non-detergent treatment for enveloped virus inactivation using the Taguchi design of experimental methodology (DOE)

In mammalian cell culture technology, viral contamination is one of the main challenges; and, so far, various strategies have been taken to remove or inactivate viruses in the cell-line production process. The suitability and feasibility of each method are determined by different factors including effectiveness in target virus inactivation, maintaining recombinant protein stability, easiness-in terms of the process condition, cost-effectiveness, and eco-friendliness. In this research, Taguchi design-of-experiments (DOE) methodology was used to optimize a non-detergent viral inactivation method via considering four factors of temperature, time, pH, and alcohol concentration in an unbiased (orthogonal) fashion with low influence of nuisance factors. Herpes Simplex Virus-1 (HSV1) and Vero cell-line were used as models for enveloped viruses and cell-line, respectively. Examining the cytopathic effects (CPE) in different dilutions showed that pH (4), alcohol (15%), time (120 min), and temperature (25 °C) were the optimal points for viral inactivation. Evaluating the significance of each parameter in the HSV-1 inactivation using Taguchi and ANOVA analyses, the contributions of pH, alcohol, temperature and time were 56.5%, 19.2%, 12%, and 12%, respectively. Examining the impact of the optimal viral treatment condition on the stability of model recombinant protein-recombinant human erythropoietin, no destabilization was detected.

A novel application of ion exchange chromatography in recombinant hepatitis B vaccine downstream processing: Improving recombinant HBsAg homogeneity by removing associated aggregates

Production of recombinant HBsAg as a main component of the hepatitis B vaccine has already been established in commercial scale. So far, many studies have been performed to optimize the production process of this recombinant vaccine. However, still aggregation and dissociation of rHBsAg virus-like particles (VLPs) are major challenges in downstream processing of this biomedicine. The structural diversity of rHBsAg is dependent on many factors including cell types, molecular characteristics of the expressed recombinant rHBsAg, buffer composition as well as operation condition and specific characteristics of each downstream processing unit. Hence, it is not relatively easy to implement a single strategy to prevent aggregation formation in already established rHBsAg production processes. In this study, we examined the efficacy of weak anion exchange chromatography (IEC)- packed with DEAE Sepharose Fast Flow medium- on isolation of rHBsAg VLPs from aggregated structures. For this purpose, the influence of ionic strength of elution buffer as a key factor was investigated in isolation and recovery of rHBsAg VLPs. The elution buffer with electrical conductivity between 27 and 31 mS/cm showed the best results for removing aggregated rHBsAg based on SEC-HPLC analysis. The results showed that in the selected conductivity range, about 79% of rHBsAg was recovered with purity above 95%. The percentage of rHBsAg VLPs in the recovered sample was between 94% and 97.5% indicating that we could obtain highly homogeneous rHBsAg within the acceptable quality level. The TEM, SDS-PAGE and western blot analysis were also in agreement with our quantitative measurements.

Application of recurrent neural network for online prediction of cell density of recombinant Pichia pastoris producing HBsAg

Artificial neural networking (ANN) seems to be a promising soft sensor for implementing current approaches of quality by design (QbD) and process analytical technologies (PAT) in the biopharmaceutical industry. In this study, we aimed to implement best-fitted ANN architecture for online prediction of the biomass amount of recombinant Pichia pastoris (P. pastoris) - expressing intracellular hepatitis B surface antigen (HBsAg) - during the fed-batch fermentation process using methanol as a sole carbon source. For this purpose, at the induction phase of methanol fed-batch fermentation, carbon evolution rate (CER), dissolved oxygen (DO), and methanol feed rate were selected as input vectors and total wet cell weight (WCW) was considered as output vector for the ANN. The obtained results indicated that after training recurrent ANN with data sets of four fed-batch runs, this toolbox could predict the WCW of the next fed-batch fermentation process at each specified time point with high accuracy. The R-squared and root-mean-square error between actual and predicted values were found to be 0.9985 and 13.73, respectively. This verified toolbox could have major importance in the biopharmaceutical industry since recombinant P. pastoris is widely used for the large-scale production of HBsAg.

Integration of size-exclusion chromatography and ultracentrifugation for purification of recombinant hepatitis B surface antigen: An alternative method for immunoaffinity chromatography

In purification process of recombinant hepatitis B surface antigen (rHBsAg), immunoaffinity chromatography (IAF) is one of the most important and effective steps in rHBsAg purification. However, the buffer composition and the interaction of ligands-rHBsAg often lead to disassembly, deformation, and clumping of a portion of these virus-like particles (VLPs). Besides, the expensive media, variable biospecific ligand density and the possibility of product contamination are other reported drawbacks of using IAF which makes the production process of rHBsAg more challenging. This study investigated the possibility of substituting IAF with purification methods of size-exclusion chromatography (SEC) and ultracentrifugation. In the SEC, the efficacy of rHBsAg purification was examined by four different media in which Toyopearl HW 65S resin demonstrated the best results. By integrating Toyopearl HW 65S resin - with a bed height of 51 cm - and ultracentrifugation process at 47,000 rpm for 48 hr, 95% of protein impurities were removed. Compared to the IAF in rHBsAg production, the purified sample contained a higher percentage of multimeric rHBsAg particles without any noticeable monomer and aggregate forms. The result of this study indicates that the proposed integrated system could be an efficient mild purification alternative for conventional IAF.

Single-domain antibodies as promising experimental tools in imaging and isolation of porcine epidemic diarrhea virus

Single-domain antibody (sdAb) or nanobody possesses specific features non-accessible for conventional antibodies that make them suitable for research and biotechnological applications. Porcine epidemic diarrhea virus (PEDV) causes lethal diarrhea in piglets, resulting in great economic losses all over the world. To detect and isolate PEDV rapidly and accurately is important for the control and further research of the clinical PEDV strains. In this study, four sdAb fragments (sdAb-Mc19/29/30/37) targeting the membrane (M) protein of PEDV were selected from sdAb library that was constructed through M protein-immunized Camelus bactrianus. The selected sdAb-Mcs were solubly expressed in Escherichia coli. The functional characteristics analysis revealed that the recombinant sdAb-Mcs have excellent binding activity and specificity to M protein but have no neutralizing activity to PEDV. For further application, sdAb-Mc37 was conjugated with quantum dots to synthesize a nanoprobe for imaging PEDV in vero cells. The observed fluorescence in vero cells clearly reflects that PEDV virions can be reliably recognized and labeled by the nanoprobe. Furthermore, the sdAb-Mc29 was conjugated with superparamagnetic nanobeads to construct immunomagnetic nanobeads (IMNBs) used to isolate PEDV. One PEDV strain was successfully isolated from clinical fecal sample, suggesting IMNBs as a novel and efficient tool suitable for PEDV isolation from clinical samples. This study provided a novel application and substantiated the suitability of sdAb as a specific binder for the isolation of viruses.

Polymer-Functionalized Magnetic Nanoparticles: Synthesis, Characterization, and Methylene Blue Adsorption

The removal of methylene blue (MB) from wastewater has attracted global concerns. In this study, polymer-functionalized magnetic nanoparticles for MB removal, Fe₃O₄@SiO₂-MPS-g-AA-AMPS (FSMAA), were successfully synthesized by grafting acrylic acid (AA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) on the surface of vinyl-modified Fe₃O₄@SiO₂. With various characterization techniques, it was confirmed that the obtained FSMAA had a core⁻shell structure, a good magnetic property, and plenty of functional groups on its surface. MB adsorption experiments showed that the adsorption capacity of FSMAA was notably enhanced as the grafted monomer concentration and solution pH were increased. The adsorption kinetic data and isothermal data were well described by the pseudo-second-order kinetic model and the Langmuir model, respectively. The maximum adsorption capacity of FSMAA was 421.9 mg g^-1 with grafted monomer concentration at 2.0 mol L^-1 and solution pH at 9, much higher than those of other adsorbents stated in previous literatures. Based on XPS analysis, surface adsorption mechanism between FSMAA and MB was electrostatic interaction, hydrogen bonding, and hydrophobic interaction. Furthermore, FSMAA was effectively regenerated by acid pickling, and the remaining adsorption capacity was more than 60% after eight adsorption⁻regeneration cycles. All the results demonstrated the self-made FSMAA was a desirable adsorbent to remove MB from wastewater.