A simple dual-inducible CRISPR interference system for multiple gene targeting in Corynebacterium glutamicum

Rewiring Metabolic Flux in Corynebacterium glutamicum Using a CRISPR/dCpf1-Based Bifunctional Regulation System

Corynebacterium glutamicum, a microorganism classified as generally recognized as safe for use in the industrial production of food raw materials and additives, has encountered challenges in achieving widespread adoption and popularization as microbial cell factories. These obstacles arise from the intricate nature of manipulating metabolic flux through conventional methods, such as gene knockout and enzyme overexpression. To address this challenge, we developed a CRISPR/dCpf1-based bifunctional regulation system to bidirectionally regulate the expression of multiple genes in C. glutamicum. Specifically, through fusing various transcription factors to the C-terminus of dCpf1, the resulting dCpf1-SoxS exhibited both CRISPR interference (CRISPRi) and CRISPR activation (CRISPRa) capabilities in C. glutamicum by altering the binding sites of crRNAs. The bifunctional regulation system was used to fine-tune metabolic flux from shikimic acid (SA) and l-serine biosynthesis, resulting in 27-fold and 10-fold increases in SA and l-serine production, respectively, compared to the original strain. These findings highlight the potential of the CRISPR/dCpf1-based bifunctional regulation system in effectively enhancing the yield of target products in C. glutamicum.

CRISPR genetic toolkits of classical food microorganisms: Current state and future prospects

Production of food-related products using microorganisms in an environmentally friendly manner is a crucial solution to global food safety and environmental pollution issues. Traditional microbial modification methods rely on artificial selection or natural mutations, which require time for repeated screening and reproduction, leading to unstable results. Therefore, it is imperative to develop rapid, efficient, and precise microbial modification technologies. This review summarizes recent advances in the construction of gene editing and metabolic regulation toolkits based on the clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated proteins (CRISPR-Cas) systems and their applications in reconstructing food microorganism metabolic networks. The development and application of gene editing toolkits from single-site gene editing to multi-site and genome-scale gene editing was also introduced. Moreover, it presented a detailed introduction to CRISPR interference, CRISPR activation, and logic circuit toolkits for metabolic network regulation. Moreover, the current challenges and future prospects for developing CRISPR genetic toolkits were also discussed.

Synthetic biology tools for engineering Corynebacterium glutamicum

Corynebacterium glutamicum is a promising organism for the industrial production of amino acids, fuels, and various value-added chemicals. From the whole genome sequence release, C. glutamicum has been valuable in the field of industrial microbiology and biotechnology. Continuous discovery of genetic manipulations and regulation mechanisms has developed C. glutamicum as a synthetic biology platform chassis. This review summarized diverse genomic manipulation technologies and gene expression tools for static, dynamic, and multiplex control at transcription and translation levels. Moreover, we discussed the current challenges and applicable tools to C. glutamicum for future advancements.

Identification of key genes through the constructed CRISPR-dcas9 to facilitate the efficient production of O-acetylhomoserine in Corynebacterium glutamicum

O-Acetylhomoserine (OAH) is an important platform chemical for the synthesis of L-methamidophos and l-methionine. It has been produced efficiently in Corynebacterium glutamicum. However, a wider range of key factors had not been identified, limiting further increases in OAH production. This study successfully identified some limiting factors and regulated them to improve OAH titer. Firstly, an efficient clustered regularly interspaced short palindromic repeats/dead CRISPR associated protein 9 (CRISPR-dCas9) system was constructed and used to identify the key genes in central metabolism and branch pathways associated with OAH biosynthesis. Then, the gltA gene involved in TCA cycle was identified as the most critical gene. A sequential promoter P_NCgl2698, which showed different transcriptional intensity in different strain growth periods, was used to control the expression of gltA gene, resulting in OAH production of 7.0 g/L at 48 h. Finally, the OAH titer of the engineered strain reached 25.9 g/L at 72 h in a 5-L bioreactor. These results show that the identification and regulation of key genes are critical for OAH biosynthesis, which would provide a better research basis for the industrial production of OAH in C. glutamicum.

CRISPR-Based Approaches for Gene Regulation in Non-Model Bacteria

CRISPR interference (CRISPRi) and CRISPR activation (CRISPRa) have become ubiquitous approaches to control gene expression in bacteria due to their simple design and effectiveness. By regulating transcription of a target gene(s), CRISPRi/a can dynamically engineer cellular metabolism, implement transcriptional regulation circuitry, or elucidate genotype-phenotype relationships from smaller targeted libraries up to whole genome-wide libraries. While CRISPRi/a has been primarily established in the model bacteria Escherichia coli and Bacillus subtilis, a growing numbering of studies have demonstrated the extension of these tools to other species of bacteria (here broadly referred to as non-model bacteria). In this mini-review, we discuss the challenges that contribute to the slower creation of CRISPRi/a tools in diverse, non-model bacteria and summarize the current state of these approaches across bacterial phyla. We find that despite the potential difficulties in establishing novel CRISPRi/a in non-model microbes, over 190 recent examples across eight bacterial phyla have been reported in the literature. Most studies have focused on tool development or used these CRISPRi/a approaches to interrogate gene function, with fewer examples applying CRISPRi/a gene regulation for metabolic engineering or high-throughput screens and selections. To date, most CRISPRi/a reports have been developed for common strains of non-model bacterial species, suggesting barriers remain to establish these genetic tools in undomesticated bacteria. More efficient and generalizable methods will help realize the immense potential of programmable CRISPR-based transcriptional control in diverse bacteria.

Development of dual-inducible duet-expression vectors for tunable gene expression control and CRISPR interference-based gene repression in Pseudomonas putida KT2440

The development of P. putida as an industrial host requires a sophisticated molecular toolbox for strain improvement, including vectors for gene expression and repression. To augment existing expression plasmids for metabolic engineering, we developed a series of dual-inducible duet-expression vectors for P. putida KT2440. A number of inducible promoters (Plac , Ptac , PtetR/tetA and Pbad ) were used in different combinations to differentially regulate the expression of individual genes. Protein expression was evaluated by measuring the fluorescence of reporter proteins (GFP and RFP). Our experiments demonstrated the use of compatible plasmids, a useful approach to coexpress multiple genes in P. putida KT2440. These duet vectors were modified to generate a fully inducible CRISPR interference system using two catalytically inactive Cas9 variants from S. pasteurianus (dCas9) and S. pyogenes (spdCas9). The utility of developed CRISPRi system(s) was demonstrated by repressing the expression of nine conditionally essential genes, resulting in growth impairment and prolonged lag phase for P. putida KT2440 growth on glucose. Furthermore, the system was shown to be tightly regulated, tunable and to provide a simple way to identify essential genes with an observable phenotype.

Development of a Hyperosmotic Stress Inducible Gene Expression System by Engineering the MtrA/MtrB-Dependent NCgl1418 Promoter in Corynebacterium glutamicum

Corynebacterium glutamicum is an important workhorse for industrial production of diversiform bioproducts. Precise regulation of gene expression is crucial for metabolic balance and enhancing production of target molecules. Auto-inducible promoters, which can be activated without expensive inducers, are ideal regulatory tools for industrial-scale application. However, few auto-inducible promoters have been identified and applied in C. glutamicum. Here, a hyperosmotic stress inducible gene expression system was developed and used for metabolic engineering of C. glutamicum. The promoter of NCgl1418 (P _NCgl1418 ) that was activated by the two-component signal transduction system MtrA/MtrB was found to exhibit a high inducibility under hyperosmotic stress conditions. A synthetic promoter library was then constructed by randomizing the flanking and space regions of P _NCgl1418 , and mutant promoters exhibiting high strength were isolated via fluorescence activated cell sorting (FACS)-based high-throughput screening. The hyperosmotic stress inducible gene expression system was applied to regulate the expression of lysE encoding a lysine exporter and repress four genes involved in lysine biosynthesis (gltA, pck, pgi, and hom) by CRISPR interference, which increased the lysine titer by 64.7% (from 17.0 to 28.0 g/L) in bioreactors. The hyperosmotic stress inducible gene expression system developed here is a simple and effective tool for gene auto-regulation in C. glutamicum and holds promise for metabolic engineering of C. glutamicum to produce valuable chemicals and fuels.

Construction and application of a CRISPR/Cas9-assisted genomic editing system for Corynebacterium glutamicum

Corynebacterium glutamicum is widely used as microbial cell factory for various bioproducts, but its genomic editing efficiency needs to be improved. In this study, a highly efficient CRISPR/Cas9-assisted genomic editing system for C. glutamicum was constructed. This system mainly involves a plasmid and can be used for both gene insertion and deletion in the chromosome of C. glutamicum. The recombinant plasmid for the target gene containing all the editing elements, and first constructed it in E. coli, then purified and transformed it into C. glutamicum. This temperature-sensitive plasmid was cured at high temperature after the genomic editing was completed in C. glutamicum. Using this genetic editing system, the genetic editing efficiency in C. glutamicum ATCC 13032 could reach 95%. The whole work of editing could be done in 8-9 days and showed most time-saving compared to the reported. Using this system, the native promoter of gdhA1 in ATCC 13032 has been replaced with the strong promoter PtacM, and more than 10 genes in ATCC 13032 have been deleted. The results demonstrate that this CRISPR/Cas9-assisted system is highly efficient and very suitable for genome editing in C. glutamicum.

Interrogating the Role of the Two Distinct Fructose-Bisphosphate Aldolases of Bacillus methanolicus by Site-Directed Mutagenesis of Key Amino Acids and Gene Repression by CRISPR Interference

The Gram-positive Bacillus methanolicus shows plasmid-dependent methylotrophy. This facultative ribulose monophosphate (RuMP) cycle methylotroph possesses two fructose bisphosphate aldolases (FBA) with distinct kinetic properties. The chromosomally encoded FBA^C is the major glycolytic aldolase. The gene for the major gluconeogenic aldolase FBA^P is found on the natural plasmid pBM19 and is induced during methylotrophic growth. The crystal structures of both enzymes were solved at 2.2 Å and 2.0 Å, respectively, and they suggested amino acid residue 51 to be crucial for binding fructose-1,6-bisphosphate (FBP) as substrate and amino acid residue 140 for active site zinc atom coordination. As FBA^C and FBA^P differed at these positions, site-directed mutagenesis (SDM) was performed to exchange one or both amino acid residues of the respective proteins. The aldol cleavage reaction was negatively affected by the amino acid exchanges that led to a complete loss of glycolytic activity of FBA^P. However, both FBA^C and FBA^P maintained gluconeogenic aldol condensation activity, and the amino acid exchanges improved the catalytic efficiency of the major glycolytic aldolase FBA^C in gluconeogenic direction at least 3-fold. These results confirmed the importance of the structural differences between FBA^C and FBA^P concerning their distinct enzymatic properties. In order to investigate the physiological roles of both aldolases, the expression of their genes was repressed individually by CRISPR interference (CRISPRi). The fba ^C RNA levels were reduced by CRISPRi, but concomitantly the fba ^P RNA levels were increased. Vice versa, a similar compensatory increase of the fba ^C RNA levels was observed when fba ^P was repressed by CRISPRi. In addition, targeting fba ^P decreased tkt ^P RNA levels since both genes are cotranscribed in a bicistronic operon. However, reduced tkt ^P RNA levels were not compensated for by increased RNA levels of the chromosomal transketolase gene tkt ^C.

Advances and Perspectives for Genome Editing Tools of Corynebacterium glutamicum

Corynebacterium glutamicum has been considered a promising synthetic biological platform for biomanufacturing and bioremediation. However, there are still some challenges in genetic manipulation of C. glutamicum. Recently, more and more genetic parts or elements (replicons, promoters, reporter genes, and selectable markers) have been mined, characterized, and applied. In addition, continuous improvement of classic molecular genetic manipulation techniques, such as allelic exchange via single/double-crossover, nuclease-mediated site-specific recombination, RecT-mediated single-chain recombination, actinophages integrase-mediated integration, and transposition mutation, has accelerated the molecular study of C. glutamicum. More importantly, emerging gene editing tools based on the CRISPR/Cas system is revolutionarily rewriting the pattern of genetic manipulation technology development for C. glutamicum, which made gene reprogramming, such as insertion, deletion, replacement, and point mutation, much more efficient and simpler. This review summarized the recent progress in molecular genetic manipulation technology development of C. glutamicum and discussed the bottlenecks and perspectives for future research of C. glutamicum as a distinctive microbial chassis.

CRISPRi-Library-Guided Target Identification for Engineering Carotenoid Production by Corynebacterium glutamicum

Corynebacterium glutamicum is a prominent production host for various value-added compounds in white biotechnology. Gene repression by dCas9/clustered regularly interspaced short palindromic repeats (CRISPR) interference (CRISPRi) allows for the identification of target genes for metabolic engineering. In this study, a CRISPRi-based library for the repression of 74 genes of C. glutamicum was constructed. The chosen genes included genes encoding enzymes of glycolysis, the pentose phosphate pathway, and the tricarboxylic acid cycle, regulatory genes, as well as genes of the methylerythritol phosphate and carotenoid biosynthesis pathways. As expected, CRISPRi-mediated repression of the carotenogenesis repressor gene crtR resulted in increased pigmentation and cellular content of the native carotenoid pigment decaprenoxanthin. CRISPRi screening identified 14 genes that affected decaprenoxanthin biosynthesis when repressed. Carotenoid biosynthesis was significantly decreased upon CRISPRi-mediated repression of 11 of these genes, while repression of 3 genes was beneficial for decaprenoxanthin production. Largely, but not in all cases, deletion of selected genes identified in the CRISPRi screen confirmed the pigmentation phenotypes obtained by CRISPRi. Notably, deletion of pgi as well as of gapA improved decaprenoxanthin levels 43-fold and 9-fold, respectively. The scope of the designed library to identify metabolic engineering targets, transfer of gene repression to stable gene deletion, and limitations of the approach were discussed.

Engineered Akkermansia muciniphila: A promising agent against diseases (Review)

Achieving a harmonious gut microbial ecosystem has been hypothesized to be a successful method for alleviating metabolic disorders. The administration of probiotics, such as Lactobacillus and Bifidobacteria, is a known traditional and safe pathway to regulate human commensal microbes. With advancements in genetic sequencing and genetic editing tools, more bacteria are able to function as engineered probiotics with multiple therapeutic properties. As one of the next-generation probiotic candidates, Akkermansia muciniphila (A. muciniphila) has been discovered to enhance the gut barrier function and moderate inflammatory responses, exhibit improved effects with pasteurization and display beneficial probiotic effects in individuals with obesity, type 2 diabetes, atherosclerosis and autism-related gastrointestinal disturbances. In view of this knowledge, the present review aimed to summarize the effects of A. muciniphila in the treatment of metabolic disorders and to discuss several mature recombination systems for the genetic modification of A. muciniphila. From gaining an enhanced understanding of its genetic background, ingested A. muciniphila is expected to be used in various applications, including as a diagnostic tool, and in the site-specific delivery of therapeutic drugs.

De Novo Engineering of Corynebacterium glutamicum for l-Proline Production

l-Proline is an important amino acid that has various industrial applications. Industrial l-proline-producing strains are obtained by the mutagenesis of Corynebacterium glutamicum. In this study, the optimized C. glutamicum genome-editing tools were further applied in the de novo construction of a hyper-l-proline-producing strain. Overexpression of a feedback inhibition-resistant γ-glutamic kinase mutant ProBG149K, deletion of a proline dehydrogenase to block l-proline degradation, overexpression of glutamate dehydrogenase to increase glutamate synthesis flux, the mutation of 6-phosphate gluconate dehydrogenase and glucose-6-phosphate-dehydrogenase in the pentose phosphate pathway to enhance NADPH supply, the deletion of pyruvate aminotransferase to decrease the byproduct l-alanine synthesis, and weakening of α-ketoglutarate dehydrogenase to regulate the TCA cycle were combined to obtain ZQJY-9. ZQJY-9 produced 19.68 ± 0.22 g/L of l-proline in flask fermentation and was also demonstrated at the 3 L bioreactor level by fed-batch fermentation producing 120.18 g/L of l-proline at 76 h with the highest productivity of 1.581 g/L/h.

Construction of a novel dual-inducible duet-expression system for gene (over)expression in Pseudomonas putida

Pseudomonas putida is a widely used host for metabolic engineering and synthetic biology. However, the use of P. putida has been hampered by the availability of a limited set of expression vectors for producing heterologous proteins. To widen the scope of expression vectors for gene co-expression studies, a previously established dual-inducible expression vector pRG_Duet2 developed for Corynebacterium glutamicum has been modified for use in P. putida. This expression vector, named pRGPDuo2, harbors two origins of replication, colE1 for replication in E. coli and pRO1600 for replication in P. putida. Two multiple cloning sites (MCS1 and MCS2) in pRGPDuo2 are individually controlled by inducible promoters Ptac or PtetR/tetA. Functional validation of pRGPDuo2 was confirmed by the co-expression of genes for the fluorescent proteins namely, superfolder green fluorescent protein (sfGFP), and red fluorescent protein (RFP). Moreover, the strength of the fluorescence signal was dependent on the inducer concentrations present in the culture medium. The expression vector pRGPDuo2 is an attractive addition to the existing repertoire of expression plasmids for expression profiling and adds to the tools available for P. putida metabolic engineering.

Obtaining a series of native gradient promoter-5'-UTR sequences in Corynebacterium glutamicum ATCC 13032

BACKGROUND

Corynebacterium glutamicum is an important industrial microorganism used for the production of many valuable compounds, especially amino acids and their derivatives. For fine-tuning of metabolic pathways, synthetic biological tools are largely based on the rational application of promoters. However, the limited number of promoters make it difficult.

RESULTS

In this study, according to the analysis of RNA-Seq data, 90 DNA fragments with lengths of 200-500 bp that may contain promoter-5'-UTR (PUTR) sequences were amplified and linked to a fluorescent protein gene. When compared with the common strong PUTR P_sodUTR, 17 strong PUTRs were obtained, which maintained stable expression strengths from the early to post stationary phase. Among them, P_NCgl1676UTR was the strongest and its fluorescent protein expression level was more than five times higher than that of P_sodUTR. Furthermore, nine typical chemicals related to the biosynthesis of sulfur-containing amino acids (such as L-methionine, L-cysteine) were selected as stress substances to preliminarily explore the stress on these PUTRs. The results showed that the expression of P_brnFUTR was activated by L-methionine, while that of P_NCgl1202UTR was severely inhibited by L-lysine.

CONCLUSIONS

These findings demonstrated that the selected PUTRs can stably express different genes, such as the red fluorescence protein gene, and can be useful for fine-tuning regulation of metabolic networks in C. glutamicum or for establishing high-throughput screening strategies through biosensor for the production of useful compounds.

Efficient Multiplex Gene Repression by CRISPR-dCpf1 in Corynebacterium glutamicum

Corynebacterium glutamicum is an important workhorse for industrial production of diversiform bioproducts. Multiplex control of metabolic pathway genes is crucial for maximizing biosynthesis of desired products. However, few tools for simultaneously regulating multiple genes in C. glutamicum have been reported. Here, a CRISPR-dCpf1-based multiplex gene repression system was developed for C. glutamicum. This system successfully repressed two fluorescent reporter genes simultaneously by expressing a dCpf1 (E1006A, D917A) and a designed single crRNA array. To demonstrate applications of this CRISPR-dCpf1 system in metabolic engineering, we applied this system to repress four genes involved in lysine biosynthesis (gltA, pck, pgi, and hom) with a single array, which increased the lysine titer and yield for over 4.0-fold. Quantitative PCR demonstrated that transcription of all the four endogenous target genes were repressed by over 90%. Thus, the CRISPR-dCpf1 system is a simple and effective technique for multiplex gene repression in C. glutamicum and holds promise for metabolic engineering of C. glutamicum to produce valuable chemicals and fuels.

Ethics assessment in research proposals adopting CRISPR technology

The rapid and exponential growth of genome editing has posed many challenges for bioethics. This article briefly explains the nature of the technique and the particularly rapid development of Clustered Regularly Interspaced Short Palindromic Repeat (CRISPR) technology. The international and, specifically, European-level systems for assessing the ethical issues consequent on these developments are outlined and discussed. The challenges posed by cases in China are summarized to raise concerns about how a more shared, universally consistent appraisal of bioethical issues can be promoted.