MOFs-derived porous nanomaterials for gas sensing

Progress and Challenges of Monometallic Titanium Coordination Polymers

The realm of titanium coordination polymer research is still in its nascent stages and presents a formidable challenge in the field of coordination chemistry. In recent decades, the focus has predominantly been on manipulating titanium reactions in solution, resulting in the synthesis of ≈60 targeted compounds. Despite the limited number of documented instances, these materials showcase a diverse array of structures, encompassing 1D chains, 2D layers, and 3D frameworks. This suggests potential for fine-tuning coordination modes and structural features in future investigations. Moreover, titanium coordination polymers not only exhibit photo-active and photo-responsive properties but also hold promise for various other significant applications. This article offers an exhaustive review tracing the evolution of titanium coordination polymer development while providing an update on recent advancements. The review encompasses a synopsis of reported synthetic strategies, methodologies, structural diversity, and associated applications. Additionally, it delves into critical issues that necessitate attention for future progressions and proposes potential avenues to effectively propel this research field forward at an accelerated pace.

Research Progress on Ammonia Sensors Based on Ti3C2Tx MXene at Room Temperature: A Review

Ammonia (NH3) potentially harms human health, the ecosystem, industrial and agricultural production, and other fields. Therefore, the detection of NH3 has broad prospects and important significance. Ti3C2Tx is a common MXene material that is great for detecting NH3 at room temperature because it has a two-dimensional layered structure, a large specific surface area, is easy to functionalize on the surface, is sensitive to gases at room temperature, and is very selective for NH3. This review provides a detailed description of the preparation process as well as recent advances in the development of gas-sensing materials based on Ti3C2Tx MXene for room-temperature NH3 detection. It also analyzes the advantages and disadvantages of various preparation and synthesis methods for Ti3C2Tx MXene's performance. Since the gas-sensitive performance of pure Ti3C2Tx MXene regarding NH3 can be further improved, this review discusses additional composite materials, including metal oxides, conductive polymers, and two-dimensional materials that can be used to improve the sensitivity of pure Ti3C2Tx MXene to NH3. Furthermore, the present state of research on the NH3 sensitivity mechanism of Ti3C2Tx MXene-based sensors is summarized in this study. Finally, this paper analyzes the challenges and future prospects of Ti3C2Tx MXene-based gas-sensitive materials for room-temperature NH3 detection.

Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe)

In this work, the efficacy of two metal-organic frameworks (MIL-101(Fe) and NH2-MIL-101(Fe)) in eliminating acetamiprid (ATP) insecticide and eosin Y (EY) dye from aqueous solution is tested. An analysis was conducted on the developed nanocomposite's optical, morphological, and structural characteristics. The adsorption isotherm, kinetics, thermodynamics, reusability, and mechanisms for ATP and EY dye removal were assessed. NH2-MIL-101(Fe) adsorbed 76% and 90% of ATP pesticide and EY dye, respectively after 10 to 15 min in optimum conditions. For both adsorbents, with regard to explaining the isotherm data, the Langmuir model offered the most accurate description. Moreover, the adsorption of ATP and EY dye is described by the pseudo-second-order kinetic model. The maximum adsorption capacities of ATP and EY dye on MIL-101(Fe) were 57.6 and 48.9 mg/g compared to 70.5 and 97.8 mg/g using NH2-MIL-101(Fe). The greatest amount of ATP and EY dye clearance was obtained at a neutral medium for both adsorbents. The results of this investigation demonstrate the effectiveness of MIL-101(Fe) and NH2-MIL-101(Fe) as effective substances in the adsorption process for removing pesticides and dyes from aqueous solution.

Metal-organic framework-derived metal oxides for resistive gas sensing: a review

Gas sensors with exceptional sensitivity and selectivity are vital in the real-time surveillance of noxious and harmful gases. Despite this, traditional gas sensing materials still face a number of challenges, such as poor selectivity, insufficient detection limits, and short lifespan. Metal oxides, which are derived from metal-organic framework materials (MOFs), have been widely used in the field of gas sensors because they have a high surface area and large pore volume. Incorporating metal oxides derived from MOFs into gas sensors can improve their sensitivity and selectivity, thus opening up new possibilities for the development of innovative, high-performance gas sensors. This article examines the gas sensing process of metal oxide semiconductors (MOS), evaluates the advances made in the research of different structures of MOF-derived metal oxides in resistive gas sensors, and provides information on their potential applications and future advancements.

Metal-Organic Framework (MOF) Derivatives as Promising Chemiresistive Gas Sensing Materials: A Review

The emission of harmful gases has seriously exceeded relative standards with the rapid development of modern industry, which has shown various negative impacts on human health and the natural environment. Recently, metal-organic frameworks (MOFs)-based materials have been widely used as chemiresistive gas sensing materials for the sensitive detection and monitoring of harmful gases such as NO_x, H₂S, and many volatile organic compounds (VOCs). In particular, the derivatives of MOFs, which are usually semiconducting metal oxides and oxide-carbon composites, hold great potential to prompt the surface reactions with analytes and thus output amplified resistance changing signals of the chemiresistors, due to their high specific surface areas, versatile structural tunability, diversified surface architectures, as well as their superior selectivity. In this review, we introduce the recent progress in applying sophisticated MOFs-derived materials for chemiresistive gas sensors, with specific emphasis placed on the synthesis and structural regulation of the MOF derivatives, and the promoted surface reaction mechanisms between MOF derivatives and gas analytes. Furthermore, the practical application of MOF derivatives for chemiresistive sensing of NO₂, H₂S, and typical VOCs (e.g., acetone and ethanol) has been discussed in detail.

Direct Probing of Vibrational Interactions in UiO-66 Polycrystalline Membranes with Femtosecond Two-Dimensional Infrared Spectroscopy

UiO-66 is a benchmark metal-organic framework that holds great promise for the design of new functional materials. In this work, we perform two-dimensional infrared measurements on polycrystalline membranes of UiO-66 grown on c-sapphire substrates. We study the symmetric and antisymmetric stretch vibrations of the carboxylate groups of the terephthalate linker ions and find that these vibrations show a rapid energy exchange and a collective vibrational relaxation with a time constant of 1.3 ps. We also find that the symmetric vibration of the carboxylate group is strongly coupled to a vibration of the aromatic ring of the terephthalate ion. We observe that the antisymmetric carboxylate vibrations of different terephthalate linkers show rapid resonant (Förster) energy transfer with a time constant of ∼1 ps.

Metal-organic framework-based materials for the abatement of air pollution and decontamination of wastewater

Developing new and efficient technologies for environmental remediation is becoming significant due to the increase in global concerns such as climate change, severe epidemics, and energy crises. Air pollution, primarily due to increased levels of H₂S, SO_x, NH₃, NO_x, CO, volatile organic compounds (VOC), and particulate matter (PM) in the atmosphere, has a significant impact on public health, and exhaust gases harm the natural sulfur, nitrogen, and carbon cycles. Similarly, wastewater discharged to the environment with metal ions, herbicides, pharmaceuticals, personal care products, dyes, and aromatics/organic compounds is a risk for health since it may lead to an outbreak of waterborne pathogens and increase the exposure to endocrine-disrupting agents. Therefore, developing new and efficient air and water quality management systems is critical. Metal-organic frameworks (MOFs) are novel materials for which the main application areas include gas storage and separation, water harvesting from the atmosphere, chemical sensing, power storage, drug delivery, and food preservation. Due to their versatile structural motifs that can be modified during synthesis, MOFs also have a great promise for green applications including air and water pollution remediation. The motivation to use MOFs for environmental applications prompted the modification of their structures via the addition of metal and functional groups, as well as the creation of heterostructures by mixing MOFs with other nanomaterials, to effectively remove hazardous contaminants from wastewater and the atmosphere. In this review, we focus on the state-of-the-art environmental applications of MOFs, particularly for water treatment and air pollution, by highlighting the groundbreaking studies in which MOFs have been used as adsorbents, membranes, and photocatalysts for the abatement of air and water pollution. We finally address the opportunities and challenges for the environmental applications of MOFs.

Zirconium Metal Organic Framework-Based Hybrid Sensors with Chiral and Luminescent Centers Fabricated by Postsynthetic Modification for the Detection and Recognition of Tryptophan Enantiomers

By immobilizing the chiral center l-histidine (l-His) into a Zr-based metal-organic framework (MOF) through post-synthetic ligand exchange, a chiral compound MOF-His has been prepared. On this basis, MOF-His is hybridized with Eu³⁺ ions to obtain the final responsive compound Eu@MOF-His. It is worth noting that the bifunctional material exhibits enantioselective luminescence properties for tryptophan enantiomers. The experimental results demonstrate that tryptophan enantiomers can effectively quench the red-light emission of Eu³⁺ ions, and also, the quenching rates are various, which may originate from the differences in the interaction between analytes and chiral recognition sites. In addition, Eu@MOF-His can realize the sensing of tryptophan enantiomers in serum. Concurrently, the compound possesses reusability, high sensitivity, and fast response speed, which means that it has the potential to serve as an excellent fluorescent sensor for detecting and identifying tryptophan enantiomers.

Tuning CO2 sensing properties of HPTS along with newly synthesized coordination polymers (CPs)

Coordination polymers (CPs), new functional hybrid materials, have received important attention due to their structural features and many different applications such as gas storage, catalysis, energy storage, small molecule adsorption, luminescence, and chemical sensors. In this study, two newly synthesized metal-organic frameworks (MOFs); [Mn₂(µ₄-dmg)-(µ₄-dmg)(µ-bipy)]_n (CP1) and [Mn₂(µ₄-dmg)(µ₄-dmg)(µ-dpeten)]_n (CP2); were used for sensing of gaseous carbon dioxide with a spectrofluorometric method with a dye, 8-hydroxypyrene-1, 3, 6-trisulfonic acid (HPTS) as matrix additive material for the first time. The ion-pair form of the HPTS was used in the polymethyl methacrylate matrix as a thin film form. When the HPTS based sensing slides along with the CPs, resulted in many advances such as high relative signal change and larger linear response range, improved sensor dynamics, and higher sensitivity with respect to the additive-free form. More specifically, in the presence of silver nanoparticles (AgNPs), the variation in relative signal intensities of CP1 and CP2 doped HPTS sensing agents were measured as 60 and 40% for the concentration range of 0-10% pCO₂, respectively. The aim of this study is to enhance the CO₂ response of HPTS with doped CPs due to their useful attributes and potential applications containing selective gas absorption.

A p-n Heterojunction Based Pd/PdO@ZnO Organic Frameworks for High-Sensitivity Room-Temperature Formaldehyde Gas Sensor

As formaldehyde is an extremely toxic volatile organic pollutant, a highly sensitive and selective gas sensor for low-concentration formaldehyde monitoring is of great importance. Herein, metal-organic framework (MOF) derived Pd/PdO@ZnO porous nanostructures were synthesized through hydrothermal method followed by calcination processes. Specifically, porous Pd/PdO@ZnO nanomaterials with large surfaces were synthesized using MOFs as sacrificial templates. During the calcination procedure, an optimized temperature of 500°C was used to form a stable structure. More importantly, intensive PdO@ZnO inside the material and composite interface provides lots of p-n heterojunction to efficiently manipulate room temperature sensing performance. As the height of the energy barrier at the junction of PdO@ZnO exponentially influences the sensor resistance, the Pd/PdO@ZnO nanomaterials exhibit high sensitivity (38.57% for 100 ppm) at room temperature for 1-ppm formaldehyde with satisfactory selectivity towards (ammonia, acetone, methanol, and IPA). Besides, due to the catalytic effect of Pd and PdO, the adsorption and desorption of the gas molecules are accelerated, and the response and recovery time is as small as 256 and 264 s, respectively. Therefore, this MOF-driven strategy can prepare metal oxide composites with high surface area, well-defined morphology, and satisfactory room-temperature formaldehyde gas sensing performance for indoor air quality control.

Application of zeolitic imidazolate framework for hexavalent chromium removal: A feasibility and mechanism study

The mechanisms and effectiveness of using zeolitic imidazolate framework (ZIF-8) [a sub-family of metal-organic framework (MOF)] particles on hexavalent chromium [Cr(VI)] removal were evaluated. The ultrasonic mixing method was applied for the preparation of ZIF-8, and chemicals used for ZIF-8 synthesis included ammonium hydroxide, zinc nitrate hexahydrate, and 2-methylimidazole. ZIF-8 particle had a clear rhombic dodecahedron morphology shape and a strong peak intensity with high crystallinity. The adsorption capacity (AC) of ZIF-8 was 30.3 mg of Cr(VI)/g of ZIF-8 [Cr(VI) = 50 mg/L]. The AC of Cr(VI) raised to 34.3 mg/g under acidic conditions (pH = 5), and the AC dropped to below 13.7 mg/g with a pH range from 7 to 11. It could be because of the competitive effects between CrO₄ ^2- and hydroxide ions for adsorption locations of ZIF-8. Cr(VI) removal relied on the amount of Cr(VI) adsorbed on the particles of ZIF-8, and the mechanisms of Cr(VI) adsorption by ZIF-8 included chemical/physical processes and the rate-limiting step was the chemical adsorption. A fraction of sorbed Cr(VI) was reduced to Cr(III), and thus, ZIF-8 could serve as a reducing agent during Cr(VI) reduction. Cr(VI) was removed effectively from the water phase by ZIF-8 via adsorption and reduction mechanisms. PRACTITIONER POINTS: ZIF-8 particles had an adsorption capacity of 30.33 mg of Cr(VI)/g of ZIF-8. Cr(VI) sorption by ZIF-8 has chemical (rate-limiting step) and physical processes. ZIF-8 can serve as a reducing agent for Cr(VI) reduction. Cr(VI) can be removed by ZIF-8 via the adsorption and reduction mechanisms.

CuxO Nanostructure-Based Gas Sensors for H2S Detection: An Overview

H2S gas is a toxic and hazardous byproduct of the oil and gas industries. It paralyzes the olfactory nerves, with concentrations above 100 ppm, resulting in loss of smell; prolonged inhalation may even cause death. One of the most important semiconducting metal oxides for the detection of H2S is CuxO (x = 1, 2), which is converted to CuxS upon exposure to H2S, leading to a remarkable modulation in the resistance and appearance of an electrical sensing signal. In this review, various morphologies of CuxO in the pristine form, composites of CuxO with other materials, and decoration/doping of noble metals on CuxO nanostructures for the reliable detection of H2S gas are thoroughly discussed. With an emphasis to the detection mechanism of CuxO-based gas sensors, this review presents findings that are of considerable value as a reference.

A novel high sensitive Cd-MOF fluorescent probe for acetone vapor in air and picric acid in water: Synthesis, structure and sensing properties

A novel three-dimensional luminescence Cd-MOF sensor with the molecular formula {[(CH₃)₂NH₂]₂ Cd₃(ptptc)₂} (complex 1) has been synthesized by using terphenyl-3,3',5,5'-tetracarboxylic acid (H₄ptptc) and Cd(NO₃)₂·4H₂O under solvothermal conditions. Single crystal X-ray diffraction analysis shows that complex 1 crystallizes in the monoclinic system C2/c space group and consists of one-dimensional channels. Complex 1 exhibits characteristic fluorescence emission (λ_em = 380 nm) both in solid state and solvents upon excitation at 300 nm. Real-time fluorescence quenching of complex 1 was observed in the fluorescence sensing of acetone vapor and picric acid. Intriguingly, ppm scale detection limit for acetone vapor in air and nano-mole scale detection limit for picric acid in water were observed. Moreover, good reusability and liner/nonlinear relationships were observed in the fluorescent titration.

A turn-on fluorescence sensing strategy for rapid detection of flumequine in water environments using covalent-coordination functionalized MOFs

With high output and large use of antibiotics in the process of aquaculture, pollution caused by antibiotics in water environments is becoming a thorny problem, and its ecological risk has aroused widespread concern.

Semiconductor Gas Sensors: Materials, Technology, Design, and Application

This paper presents an overview of semiconductor materials used in gas sensors, their technology, design, and application. Semiconductor materials include metal oxides, conducting polymers, carbon nanotubes, and 2D materials. Metal oxides are most often the first choice due to their ease of fabrication, low cost, high sensitivity, and stability. Some of their disadvantages are low selectivity and high operating temperature. Conducting polymers have the advantage of a low operating temperature and can detect many organic vapors. They are flexible but affected by humidity. Carbon nanotubes are chemically and mechanically stable and are sensitive towards NO and NH3, but need dopants or modifications to sense other gases. Graphene, transition metal chalcogenides, boron nitride, transition metal carbides/nitrides, metal organic frameworks, and metal oxide nanosheets as 2D materials represent gas-sensing materials of the future, especially in medical devices, such as breath sensing. This overview covers the most used semiconducting materials in gas sensing, their synthesis methods and morphology, especially oxide nanostructures, heterostructures, and 2D materials, as well as sensor technology and design, application in advance electronic circuits and systems, and research challenges from the perspective of emerging technologies.

Advancements in Microfabricated Gas Sensors and Microanalytical Tools for the Sensitive and Selective Detection of Odors

In recent years, advancements in micromachining techniques and nanomaterials have enabled the fabrication of highly sensitive devices for the detection of odorous species. Recent efforts done in the miniaturization of gas sensors have contributed to obtain increasingly compact and portable devices. Besides, the implementation of new nanomaterials in the active layer of these devices is helping to optimize their performance and increase their sensitivity close to humans' olfactory system. Nonetheless, a common concern of general-purpose gas sensors is their lack of selectivity towards multiple analytes. In recent years, advancements in microfabrication techniques and microfluidics have contributed to create new microanalytical tools, which represent a very good alternative to conventional analytical devices and sensor-array systems for the selective detection of odors. Hence, this paper presents a general overview of the recent advancements in microfabricated gas sensors and microanalytical devices for the sensitive and selective detection of volatile organic compounds (VOCs). The working principle of these devices, design requirements, implementation techniques, and the key parameters to optimize their performance are evaluated in this paper. The authors of this work intend to show the potential of combining both solutions in the creation of highly compact, low-cost, and easy-to-deploy platforms for odor monitoring.

A microcube-like hierarchical heterostructure of α-Fe2O3@α-MoO3 for trimethylamine sensing

A rational design and directional synthesis of well-defined porous metal oxide heterostructures remains a challenge for the fabrication of new gas sensors with enhanced sensing properties. Herein, a novel hierarchical heterostructure of α-Fe2O3@α-MoO3 microcubes was prepared by applying a self-sacrifice template strategy, in which a porous metal-organic framework (MOF) was used as the precursor with the partial insertion of OH- and MoO42- and extraction of [Fe(CN)6]34- followed by heating treatment. Benefiting from the porous microcubic structural characteristic, the α-Fe2O3@α-MoO3 heterostructures exhibited excellent selectivity and high sensitivity for triethylamine gas with the highest response value (Ra/Rg) of 18.64 under the operating temperature of 240 °C. The experimental results also revealed that the material showed a fast response and recovery time (12 s/106 s) and excellent repeatability for at least 20 days. This feasible synthetic strategy may provide a versatile and controlled way to prepare other polymetal oxide-based heterostructures with improved sensing performance.

ZnO-Decorated In/Ga Oxide Nanotubes Derived from Bimetallic In/Ga MOFs for Fast Acetone Detection with High Sensitivity and Selectivity

The development of acetone gas sensors is desirable but challenging for both air quality monitoring and medical diagnosis. Herein, starting from bimetallic In/Ga metal-organic frameworks (MOFs) (MIL-68 (In/Ga)), a facile strategy is proposed to couple with zinc ions to design In/Ga oxide (IGO)@ZnO core-shell nanotubes for efficient acetone detection. In such a heterostructure, tiny ZnO nanoparticles are closely decorated on IGO nanotubes, which is beneficial to enlarge the specific surface area and create rich oxygen vacancies and heterojunction interfaces. Benefiting from the structural merits and synergetic effects, the IGO@ZnO-based gas sensor exhibits a low detection limitation (200 ppb), a high response, good linearity relationship between the sensing responses and wide testing acetone concentrations, and fast response and recovery time (6.8/6.1 s) with good selectivity and stability. These sensing performances strongly indicate the practical application to quantitatively detect acetone.

Facile fabrication of bimetallic Fe-Mg MOF for the synthesis of xanthenes and removal of heavy metal ions

This work reported the preparation of Mg-MOF, Fe-MOF and Fe-Mg MOF by a solvothermal technique and their characterization with FT-IR, XRD, SEM, EDS, TEM and S BET analyses. The nanoparticle diameter ranged from 3.1 to 10.9 nm. The acidity of the MOFs was measured by nonaqueous potentiometric titration of n-butylamine. It was observed that the formation of a bimetallic MOF sharply increases the surface acidity and the catalytic activity. The catalytic results of the Fe-Mg MOF catalyzing the synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes in comparison with those of parent MOFs showed a higher yield of the desired product in a lower time and among various Fe : Mg, the (0.6 : 1) Fe-Mg MOF showed the highest catalytic activity and acidity. Even after the 4th run, the Fe-Mg MOF catalyst still maintained nearly the initial catalytic activity. The adsorption performance of Mg-MOF, Fe-MOF and Fe-Mg MOF was evaluated by batch experiments. The effect of contact time, the solution pH, the adsorbent dose and the initial concentration of the heavy metal ions was discussed. It was found that the capacity of the bimetallic Fe-Mg MOF for Pb(ii), Cu(ii) and Cd(ii) adsorption was higher than that of the Mg-MOF and Fe-MOF, the kinetic data followed the pseudo-second-order kinetic model and the isothermal data obeyed the Langmuir isotherm model. The mechanism of the removal of the heavy metal ions was discussed.