Characterization and thermal stability of poly(vinyl chloride) plasticized with epoxidized soybean oil for food packaging

Poly(vinyl chloride) Films Incorporated with Antioxidant ZnO-Flavonoid Nanoparticles: A Strategy for Food Preservation

Antioxidant films were prepared using poly(vinyl chloride) (PVC) incorporated with 0.5% or 1.0% zinc oxide (ZnO)-flavonoid (quercetin or morin) nanoparticles (NPZnO-Q% or NPZnO-M%) via the casting method. NP incorporation within the polymer matrix influenced the structural, morphological, optical, and thermal properties of the PVC-based films, as well as their antioxidant activity as assessed using the DPPH radical scavenging method. Our results indicated that increasing ZnO-flavonoid NP concentration increased films thickness, while reducing ultraviolet light (UV) transmittance but conserving transparency. The presence of NPZnO-Q% or NPZnO-M% improved the surface uniformity and thermal stability of the active films. In terms of antioxidant activity, there was an enhancement in the DPPH radical scavenging capacity (PVC/ZnO-Q1.0% > PVC/ZnO-Q0.5% > PVC/ZnO-M0.5% > PVC/ZnO-M1.0% > PVC), suggesting that the packaging can help protect food from oxidative processes. Therefore, these antioxidant films represent an innovative strategy for using as active food packaging material, especially intended for aiding in quality preservation and extending the shelf life of fatty foods.

Contamination levels and ecological risk assessment of phthalate esters (PAEs) in the aquatic environment of Chaohu Lake

Phthalate esters (PAEs), widely recognized as synthetic organic compounds with extensive production and utilization, are known to disrupt physiological processes in both animals and humans, even at low environmental concentrations. This study investigated the occurrence, distribution, and potential ecological risk of five representative PAEs (DMP, Dimethyl phthalate; DEP, Diethyl phthalate; DBP, Dibutyl phthalate; DiBP, Diisobutyl phthalate; DEHP, Bis(2-ethylhexyl) phthalate) in a typical lake (Chaohu Lake, China). It was found that PAEs were detected in both the aqueous (1.09-6.402 µg/L) and solid phases (0.827-6.602 µg/g) of Chaohu Lake. Notably, DiBP and DBP were the predominant PAEs in the water, and DiBP and DEHP were the most prevalent in the sediments. The concentrations of PAEs exhibited significant seasonal variations in the aqueous phases, with total PAEs in summer being nearly twice those in winter. Toxicity assessments revealed that DEHP, DBP, and DiBP posed high risks to the survival of three indicator organisms (algae, Daphnia, and fish) in the aqueous phase. In the solid phase, the exceeding rate of DiBP was as high as 92.9%. On the other hand, DBP and DEHP generally presenting moderate risk, although some sites were identified as high-risk. This study's analysis of PAEs concentrations in Chaohu Lake reveals a discernible increasing trend when compared with historical data. These findings underscore the urgent need for interventions to mitigate the ecological threats posed by PAEs in Chaohu Lake.

Fabrication of antimicrobial and high-toughness poly (lactic acid) composite films using tung oil derivatives

Tung oil derivatives are promising alternatives to traditional toxic plasticizers for improving the toughness of poly (lactic acid) (PLA) films. In this study, a tung oil-based quaternary ammonium salt (Q-ETO) was synthesized using a multi-step process involving epoxidation, ring opening, and substitution reactions. PLA based composite films with various amounts of Q-ETO were prepared by solvent casting. The impact of various amount of Q-ETO on PLA/Q-ETO composite films were evaluated with regard to their mechanical properties, hydrophilicity, water vapor permeability, optical properties, thermal stability, antibacterial properties, and leaching properties. The PLA/5%Q-ETO composite film yielded the highest elongation at break (82.52 ± 9.53 %), which was 153.67 % higher than that of pure PLA. All PLA composite films showed an antibacterial efficiency exceeding 90 % against both S. aureus and E. coli. Moreover, the PLA/Q-ETO composite film blocked the transmission of both ultraviolet and visible light while preventing the permeation of water vapor. The addition of Q-ETO only weakly affected the color and thermal stability of the PLA/Q-ETO composite film. Given the numerous advantages of the PLA composite film, it has significant potential for application as a food packaging material.

A novel salt-barrier method of preparation flexible temperature resistant full-component nanocellulose membranes

With the simplification and diversification of separation technologies, nanocellulose membranes have become widely used as insulating materials. Recently, study of nanocellulose membrane modification has become a hot topic. However, the application of nanocellulose membrane has been limited due to their inadequate heat resistance and flexibility. Herein, based on the pyrolytic and thermoplastic properties of cellulose, we innovatively introduced a salt barrier scheme to regulate the degree of hydrogen bonding and thermoplastic bonding between fibers. This was achieved by adding a salt barrier agent, NaCl, in the middle of the nanocellulose to prepare and obtain flexible, high-temperature-resistant nanocellulose film materials. The full-component cellulose films thus prepared exhibited high tensile strength (8 MPa), excellent flexibility (105 mN), high electrical breakdown strength (67 KV/mm), and volume resistivity meeting the standard of insulation materials (3.23 × 1013 Ω·m). This scheme adheres to the principles of low cost, green, non-toxic and non-hazardous, providing a brand new approach for the research and development of high temperature resistant cellulose membrane materials, which is of significant commercial value and industrialization prospect.

Migration of microplastics from plastic packaging into foods and its potential threats on human health

Microplastics from food packaging material have risen in number and dispersion in the aquatic system, the terrestrial environment, and the atmosphere in recent decades. Microplastics are of particular concern due to their long-term durability in the environment, their great potential for releasing plastic monomers and additives/chemicals, and their vector-capacity for adsorbing or collecting other pollutants. Consumption of foods containing migrating monomers can lead to accumulation in the body and the build-up of monomers in the body can trigger cancer. The book chapter focuses the commercial plastic food packaging materials and describes their release mechanisms of microplastics from packaging into foods. To prevent the potential risk of microplastics migrated into food products, the factors influencing microplastic to the food products, e.g., high temperatures, ultraviolet and bacteria, have been discussed. Additionally, as many evidences shows that the microplastic components are toxic and carcinogenic, the potential threats and negative effects on human health have also been highlighted. Moreover, future trends is summarized to reduce the microplastic migration by enhancing public awareness as well as improving waste management.

Mesoporous epoxidized soybean oil-supported copper-based magnetic nanocatalyst and amberlite-supported azide as a green and efficient catalytic system for 1,2,3-triazole synthesis

A new green mesoporous magnetically heterogeneous catalyst was prepared by the copper immobilization onto magnetic epoxidized soybean oil as a nano bio-support and was utilized for the synthesis of 1,4-disubstituted-1,2,3-triazole derivatives in the presence of amberlite supported azide. A great range of triazole derivatives were synthesized from benzyl halides or epoxides halides in high yields at the room temperature. The catalyst was characterized by various techniques such as FT-IR, XRD, VSM, FE-SEM, EDX, TEM, BET, TGA, and ICP analysis. This catalytic system can be reused for five times without any significant decrease in the catalytic activity. Fe3O4@SiO-ESBO/CuO nanocatalyst and amberlite supported azide as a green catalytic system has been used for the regioselective synthesis of triazole derivatives in water. A large range of triazole derivatives were synthesized from benzyl halides or epoxides in high yields.

Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers

In this work, we report the development and characterization of polylactide (PLA) blends with improved toughness by the addition of 10 wt.% lactic acid oligomers (OLA) and assess the feasibility of reactive extrusion (REX) and injection moulding to obtain high impact resistant injection moulded parts. To improve PLA/OLA interactions, two approaches are carried out. On the one hand, reactive extrusion of PLA/OLA with different dicumyl peroxide (DCP) concentrations is evaluated and, on the other hand, the effect of maleinized linseed oil (MLO) is studied. The effect of DCP and MLO content used in the reactive extrusion process is evaluated in terms of mechanical, thermal, dynamic mechanical, wetting and colour properties, as well as the morphology of the obtained materials. The impact strength of neat PLA (39.3 kJ/m2) was slightly improved up to 42.4 kJ/m2 with 10 wt.% OLA. Nevertheless, reactive extrusion with 0.3 phr DCP (parts by weight of DCP per 100 parts by weight of PLA–OLA base blend 90:10) led to a noticeable higher impact strength of 51.7 kJ/m2, while the reactive extrusion with 6 phr MLO gave an even higher impact strength of 59.5 kJ/m2, thus giving evidence of the feasibility of these two approaches to overcome the intrinsic brittleness of PLA. Therefore, despite MLO being able to provide the highest impact strength, reactive extrusion with DCP led to high transparency, which could be an interesting feature in food packaging, for example. In any case, these two approaches represent environmentally friendly strategies to improve PLA toughness.

Effective, Environmentally Friendly PVC Plasticizers Based on Succinic Acid

The plasticizers used in this study were synthesized from renewable raw materials using succinic acid, oleic acid, and propylene glycol. Four environmentally friendly plasticizer samples were obtained; their chemical structures and compositions were confirmed by gas chromatography (GC) and infrared spectroscopy (FT–IR) analyses, and their physicochemical properties and thermal stability (TGA analysis) were investigated. The obtained ester mixtures were used as poly(vinyl chloride) (PVC) plasticizers and their plasticization efficiency was determined in comparison to traditional, commercially available phthalate plasticizers, such as DEHP (di(2-ethylhexyl phthalate) and DINP (diisononyl phthalate). Mechanical properties and migration resistance were determined for soft PVC with the use of three concentrations of plasticizers (40 PHR, 50 PHR, and 60 PHR). It was observed that the obtained plasticizers exhibited the same plasticization efficiency and were characterized with good mechanical and physical properties in comparison to commercial plasticizers. The tensile strength was approx. 19 MPa, while the elongation at break was approx. 250% for all tested plasticizers at a concentration of 50 PHR. Furthermore, plasticizer migration studies showed that the synthesized plasticizers had excellent resistance to plasticizer leaching. The best migration test result obtained was 70% lower than that for DEHP or DINP. The ester mixture that was found to be the most favorable plasticizer was characterized by good thermal and thermo-oxidative stability (5% weight loss temperature: 227.8 °C in air and 261.1 °C in nitrogen). The results of the research clearly indicate that the synthesized esters can provide a green alternative to toxic phthalate plasticizers.

Microplastics identification and quantification in the composted Organic Fraction of Municipal Solid Waste

Composted Organic Fraction of Municipal Solid Waste (OFMSW) is used in agricultural soils as a source of organic matter and nutrients. Besides, its use avoids landfilling or incineration following the principles of circular economy. It is well established that source separated OFMSW is suitable for compost production, but its quality depends on their content in non-compostable materials. In this work, we selected and studied the final refined compost form five OFMSW facilities over a five-month period. The plants displayed differences in collection systems, concentration on non-desired materials, treatment technology and density of served population. The presence of plastic was studied using a separation and identification process that consisted of oxidation and flotation followed by spectroscopic identification. The results showed a concentration of plastic impurities in the 10-30 items/g of dry compost range. The concentration of small fragments and fibres (equivalent diameter < 5 mm) was in the 5-20 items/g of dry weight range and were dominated by fibres (25% of all particles <500 μm). Five polymers represented 94% of the plastic items: polyethylene, polystyrene, polyester, polypropylene, polyvinyl chloride, and acrylic polymers in order of abundance. Polyethylene was more abundant in films, polystyrene in fragments, polypropylene in filaments, and fibres were dominated by polyester. Our results showed that smaller plants, with OFMSW door-to-door collection systems produced compost with less plastic of all sizes. Compost from big facilities fed by OFMSW from street bin collection displayed the highest contents of plastics. No debris from compostable bioplastics were found in any of the samples, meaning that if correctly composted their current use does not contribute to the spreading of anthropogenic pollution. Our results suggested that the use of compostable polymers and the implementation of door-to-door collection systems could reduce the concentration of plastic impurities in compost from OFMSW.

Eco-friendly polymer composite films based on waste polyvinyl chloride/sunflower seed cake for antimicrobial and antistatic applications

Purpose

This study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different proportions to reach good mechanical and insulating properties for antimicrobial and antistatic applications.

Design/methodology/approach

Eco-friendly composite films based on waste polyvinylchloride (WPVC) and SSC of concentrations (0, 10, 20, 30 and 40 Wt.%) were prepared using solution casting method. Further, the effect of sunflower seed oil (SSO) on the biophysical properties of the prepared composites is also investigated. Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscope, mechanical, thermal, dielectric properties were assessed. Besides, the antimicrobial and biodegradation tests were also studied.

Findings

The crystallinity increases by rising SSC concentration as revealed by XRD results. Additionally, the permittivity (ε′) increases by increasing SSC filler and SSO as well. A remarkable increase in dc conductivity was attained after the addition of SSO. While raw WPVC has very low bacterial activity. The composite films are found to be very effective against staphylococcus epidermidis, staphylococcus aureus bacteria and against candida albicans as well. On the other hand, the weight loss of WPVC increases by adding of SSC and SSO, as disclosed by biodegradation studies.

Originality/value

The study aims to reach the optimum method for safe and beneficial disposal of PVC waste as well as SSC for antistatic and antimicrobial application.

Anti-Gnawing, Thermo-Mechanical and Rheological Properties of Polyvinyl Chloride: Effect of Capsicum Oleoresin and Denatonium Benzoate

Anti-rodent polymer composites were prepared using non-toxic substances denatonium benzoate (DB) and capsicum oleroresin (CO) mixed with polyvinyl chloride (PVC) matrix. DB is mixed in zinc stearate (ZnSt) called DB/ZnSt, and CO, providing burning sensation, is impregnated in mesoporous silica named SiCO. There are three sets of sample: Blank, composites Set I and Set II. Set I consists of DB/ZnSt at concentration of 1.96 wt% and SiCO at concentration of 12.16 wt%, 14.47 wt%, 18.75 wt% and 23.53 wt%. Set II comprises SiCO at the same amount of Set I. The anti-rodent composites studied are anti-gnawing, surface morphology, thermo-mechanical and rheological properties. Anti-rodent testing is analyzed by one-way blocked analysis of variance (ANOVA) and compared with Tukey test with a 95% level of significance, presenting good anti-gnawing efficiency. The best rat-proof sample is II.4, consisting of SiCO 23.53 wt%, which presents percentage of weight loss from gnawing at 1.68% compared to weight loss of neat PVC at 59.74%. The addition of SiCO at concentration ranging from 12.16 to 23.53 wt% reduces tensile strength around 25–50%, elongation at break strength around 2–23%, shear storage modulus (G′) around 30%, shear loss modulus (G″) shear viscosity (η) and glass transition (Tg) around 43% compared to Blank. The increase in SiCO concentration slightly improves the thermal stability of PVC composites around 3%, but the addition of DB/ZnSt at 1.96 wt% slightly reduces those properties.

Developments of biobased plasticizers for compostable polymers in the green packaging applications: A review

The demand for biobased materials for various end-uses in the bioplastic industry is substantially growing due to increasing awareness of health and environmental concerns, along with the toxicity of synthetic plasticizers such as phthalates. This fact has stimulated new regulations requiring the replacement of synthetic conventional plasticizers, particularly for packaging applications. Biobased plasticizers have recently been considered as essential additives, which may be used during the processing of compostable polymers to enormously boost biobased packaging applications. The development and utilization of biobased plasticizers derived from epoxidized soybean oil, castor oil, cardanol, citrate, and isosorbide have been broadly investigated. The synthesis of biobased plasticizers derived from renewable feedstocks and their impact on packaging material performance have been emphasized. Moreover, the effect of biobased plasticizer concentration, interaction, and compatibility on the polymer properties has been examined. Recent developments have resulted in the replacement of synthetic plasticizers by biobased counterparts. Particularly, this has been the case for some biodegradable thermoplastics-based packaging applications.

Effective Epoxidation of Fatty Acid Methyl Esters with Hydrogen Peroxide by the Catalytic System H3PW12O40/Quaternary Phosphonium Salts

Six quaternary phosphonium salts (QPSs) in combination with phosphotungstic heteropolyacid, H3PW12O40, were tested in the epoxidation of rapeseed oil fatty acid methyl esters with a hydrogen peroxide aqueous solution. The QPSs consisted of trihexyl(tetradecyl)phosphonium [P6], tributyl-tetradecylphosphonium [P4] or tetraoctylphosphonium [P8] cation and different anions—chloride (Cl−), bromide (Br−), tetrafluoroborate (BF4−), bis(trifluoromethylsulfonyl)amide (NTf2−), bis(2,4,4-trimethyl-pentyl)phosphinate (Phosf−). The influence of the kind of QPS and temperature on the epoxy number, iodine number, glycol content has been determined. The epoxidation was confirmed using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) and elemental analysis CHO. Two QPSs with a trihexyltetradecyphosphonium cation—[P6][Fosf] and [P6][Cl]—were selected as the most effective in the studied epoxidation process. The proposed kinetic model takes into consideration the two reactions, namely, epoxidation and epoxy ring opening involving the formation of hydroxyl groups. The rate constants and activation energies for epoxidation fatty acid methyl esters were determined.

Bioremediation of polyvinyl chloride (PVC) films by marine bacteria

Polyvinyl chloride (PVC) is the third one after polyethylene and polypropylene in the production demand. It intends to grow further, causing an increase in the risk of health and ecological problems due to environmental accumulation and incineration. In the present study, we determined the biodegradative abilities of marine bacteria for PVC. Three potential marine bacterial isolates, T-1.3, BP-4.3 and S-237 (Vibrio, Altermonas and Cobetia, respectively) were identified after preliminary screening. They led to active biofilm formation, viability and protein formation on the PVC surface. The highest weight loss (1.76%) of PVC films was exhibited by BP-4.3 isolate after 60 days of incubation. Remineralization of PVC film was confirmed by CO₂ assimilation assay. Change in surface topography was confirmed by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). The functional group peak intensity was decreased for the terminal chlorine group at the region 1000-1300 cm^-1, which indicated the dechlorination. Thermogravimetric, tensile strength and contact angle analysis showed a decline in the mechanical properties and a rise in PVC film's hydrophilic nature after biodegradation. These results demonstrated promising evidence of PVC degradation by marine bacteria.

The Epoxidized Vietnam Rubber Seed Oil as a Secondary Plasticizer/Thermal Stabilizer in PVC Processing

The epoxidized rubber seed oil (EeRSO) was a mixture of epoxidized triglyceride, and epoxidized methyl ester of free fatty acids was used as a secondary plasticizer for PVC. An increase in tensile properties was observed by substituting the 10 phr DOP plasticizer with the EeRSO in PVC formulation. A leaching test was performed in five media to evaluate the plasticizing effect. The sample weight increased slightly after soaking in water and 30 wt.% acetic solution, decreased slightly in 10 wt.% KOH solution, and reduced sharply and strongly in sunflower oil and n-hexane. The 10 phr EeRSO in PVC formulation has presented an improvement in migration, volatilization characteristics, and thermal property of PVC. After 72 hours of soaking in n-hexane, the shore A hardness of the EeRSO plasticized PVC sample increased by 14.5% while the PVC sample without EeRSO was blistered and its shore A hardness could not be measured. This was the clearest evidence for the positive effect of EeRSO as a secondary plasticizer. The morphology of the fractured surface of the samples after immersing in n-hexane was studied by using scanning electron microscopy. Thermogravimetric analysis showed the role of EeRSO in significant improvement in thermal stability. In general, EeRSO not only acts as a primary plasticizer to improve the migration, extraction, and volatilization characteristics but also contributes to the thermal stability of PVC.

Renewable bio-based adhesive fabricated from a novel biopolymer and soy protein

In this study, a bio-based soy protein adhesive derived from environmentally friendly and renewable enzymatic hydrolysis lignin (EHL), epoxidized soybean oil (ESO), and soy protein isolate (SPI), was successfully prepared. A novel biopolymer (EHL-ESO), as a multifunctional crosslinker, was firstly synthesized from modified EHL and ESO, and then crosslinked with soy protein isolate to obtain a bio-based soy protein adhesive. The structure, thermal properties, and adhesion performance of the obtained soy protein adhesives were determined by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and wet shear strength. The maximum degradation temperature of SPI/EHL-ESO adhesives (332-343 °C) was higher than that of the pristine SPI adhesive (302 °C). Moreover, plywood bonded by the modified adhesive reached a maximum wet shear strength value of 1.07 MPa, a significant increase of 101.8% from the plywood bonded by pristine SPI adhesive. The enhancements in the thermal stability and wet shear strength were attributed to the formation of a dense crosslinking network structure. This work not only highlights the potential to replace petroleum-based polymers, but also presents a green approach to fabricate fully bio-based soy protein adhesive for preparing all-biomass wood composite materials.

Recent Attempts in the Design of Efficient PVC Plasticizers with Reduced Migration

This paper reviews the current trends in replacing commonly used plasticizers in poly(vinyl chloride), PVC, formulations by new compounds with reduced migration, leading to the enhancement in mechanical properties and better plasticizing efficiency. Novel plasticizers have been divided into three groups depending on the replacement strategy, i.e., total replacement, partial replacement, and internal plasticizers. Chemical and physical properties of PVC formulations containing a wide range of plasticizers have been compared, allowing observance of the improvements in polymer performance in comparison to PVC plasticized with conventionally applied bis(2-ethylhexyl) phthalate, di-n-octyl phthalate, bis(2-ethylhexyl) terephthalate and di-n-octyl terephthalate. Among a variety of newly developed plasticizers, we have indicated those presenting excellent migration resistance and advantageous mechanical properties, as well as those derived from natural sources. A separate chapter has been dedicated to the description of a synergistic effect of a mixture of two plasticizers, primary and secondary, that benefits in migration suppression when secondary plasticizer is added to PVC blend.

Marine bacterial biodegradation of low-density polyethylene (LDPE) plastic

Polyethylene has considered as non-degradable for decades, and their degradation through marine bacteria has rarely studied. However, LDPE found a significant source of pollution in the marine environment. In the present study, four bacterial strains capable of biodegradation of LDPE were isolated from the marine environment. These bacterial isolates H-237, H-255, H-256 and H-265 were revealed close similarity with Cobetia sp., Halomonas sp., Exigobacterium sp. and Alcanivorax sp., respectively based on 16S rRNA gene sequencing method. These bacterial isolates were individually incubated for 90 days supplied with LDPE films as a carbon source using the Bushnell-Haas medium. During the biodegradation assay, bacterial isolates were formed the viable biofilm on the LDPE surface, which decreased the thermal stability of the films. At the end of the incubation study, a maximum weight loss of 1.72% of LDPE film was observed by the bacterial isolate H-255. The bacterial attachment on the film changed the physical structure (surface erosion, roughness and degradation) which were confirmed by field emission scanning electron microscopy and atomic force microscopy. The changes in the chemical structure of the LDPE film were analyzed by Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). This ATR-FTIR showed the shifting of peaks of C-H stretch and C=C bond stretching and the new peaks formation of C-O and -C=C- bonds in comparison to control LDPE film. Further, biodegradation of LDPE film was also confirmed by remineralization of carbon and enzymatic activities. This study revealed that the active biodegradation of LDPE film by marine bacteria and these bacteria could reduce plastic pollution in the marine environment.

Microscopic and chemical characterization of PVC tube used for dialysis lines: A new approach

Polyvinylchloride is universally agreed upon to be the material of choice for tubings and for containers for medical application. Many alterations of the chemical/physical surface conditions, mainly due to an altered extrusion process, could influence its biocompatibility by promoting platelet aggregation. Biocompatibility and safety of the medical device must be preserved, also monitoring the migration of additives within polyvinylchloride during the diffusion process. A large variety of methods are used to verify the correct composition and extrusion of polyvinylchloride but, generally, they need long experimental time and are expensive. The aim of the study is to propose a simple, economic and rapid approach based on Fourier transform-infrared spectroscopy and Coomassie Blue staining. The method has been used to detect chemical and morphological defects caused by an altered extrusion process on 20/75 polyvinylchloride tubings in a blind test. This approach positively identified altered samples in 80% of the cases. The suggested approach represents a reliable and versatile method to detect and monitor surface defects by an easy, inexpensive and reproducible method.

Synthesis and properties of a bio-based PVC plasticizer derived from lactic acid

A green plasticizer ALHD is synthesized from the corn fermentation product, lactic acid, which is non-toxic and renewable.

Synthesis of a Renewable, Waste-Derived Nonisocyanate Polyurethane from Fish Processing Discards and Cashew Nutshell-Derived Amines

Waste-derived fish oil (FO) can be epoxidized and reacted with CO₂ to produce a cyclic carbonate containing material. Upon reaction with a bioderived amine, this leads to the formation of nonisocyanate polyurethane materials. The FO used is extracted from the by-products produced at fish processing plants, including heads, bones, skin, and viscera. Three different methods are used for the epoxidation of the FO: (i) oxidation by 3-chloroperoxybenzoic acid, (ii) oxidation by hydrogen peroxide and acetic acid, catalyzed by sulfuric acid, and (iii) oxidation by hydrogen peroxide catalyzed by formic acid. Synthesized FO epoxides are reacted with CO₂ to yield FO cyclic carbonates with high conversions. The products are characterized by ¹ H and ¹³ C NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, and viscometry. Using a biomass-derived amine, nonisocyanate polyurethane materials are synthesized. This process can lead to new opportunities in waste management, producing valuable materials from a resource that is otherwise underutilized.

Biodegradation of polyvinyl chloride plastic films by enriched anaerobic marine consortia

Plastics remarkably contribute to marine litter, which is raising serious concerns. Currently, little is known about the fate of most plastics entering the marine environment and their potential biodegradation rate and extent under anoxic conditions. In this work, biodegradation of polyvinyl chloride (PVC) films by consortia enriched from marine samples (litter and water) was evaluated in anaerobic microcosms. After 7 months, three microcosms showed dense biofilms on plastic surfaces, gravimetric weight losses up to 11.7 ± 0.6%, marked decreases in thermal stability and average molecular weight of the polymer, suggesting microbial attack towards polymer chains. After 24 months, further three consortia showed the same abilities. Microbial communities analyzed at month 24 included taxa closely related to those previously reported as halogenated organic compounds degraders. The study is the first report on PVC biodegradation by marine anaerobic microbes and provides insights on potential biodegradation of the plastic film introduced into the sea by native microbes.

Biocompatible chemical network of α-cellulose-ESBO (epoxidized soybean oil) scaffold for tissue engineering application

Despite many desirable properties, the use of α-cellulose in biomedical applications is limited because of its poor processability. Here we demonstrate that the chemical network of α-cellulose and epoxidized soybean oil (ESBO) can be adequately processed into biocompatible, self-standing, highly-porous scaffolds for tissue engineering applications. First, α-cellulose was dissolved in N-Methylmorpholine N-oxide monohydrate (NMMO.MH) and chemically crosslinked by ESBO. Then, the porous scaffolds of α-cellulose-ESBO were fabricated by solvent exchange and freeze-drying techniques. The scaffolds were evaluated for morphology, thermal and mechanical stability, and in vitro cell attachment and cell viability. Scanning electron microscopy images and Brunauer-Emmett-Teller results suggested that porous scaffolds provide a good surface and internal structure for cell adhesion and growth. Specifically, the α-cellulose-ESBO scaffolds support the homogeneous attachment and proliferation of MG63 cells. Overall, our results suggest that α-cellulose-ESBO chemically crosslinked networks are biocompatible and demonstrate a remarkable capacity for the development of tissue engineering platforms.

Compression behavior of soft PVC foams obtained by cardanol-derived plasticizer

This work is aimed to study the application of a bio-based plasticizer, obtained by acetylation and epoxydation of cardanol, for the production of soft PVC foams. The use of epoxidized cardanol acetate allowed obtaining a more efficient foaming of soft PVC compared to phthalate plasticizer bis(2-ethylhexyl) phthalate (DEHP), mainly due to the lower viscosity attained in the decomposition range of azodicarbonamide (AZDC). As a consequence, the foams produced by epoxidized cardanol acetate showed a lower density compared to those produced with DEHP. The lower density yielded lower values of compressive modulus. However, the modulus was shown to be not only dependent on the density, but also showed a direct dependence on the type of plasticizer used, in addition to processing temperature and AZDC content. As a consequence, the specific compressive modulus also showed a direct dependence on the type of plasticizer, processing temperature and AZDC content. Such dependence was explained by considering different cellular morphologies developed during foaming under different processing conditions, including type of plasticizer. In particular, it was shown that the lower viscosity attained by epoxidized cardanol acetate plasticized PVC involved an increase of the average pore size of the foam, which was shown to be the main cause of the variation of the specific compressive modulus.

Plasticization Effect of Bio-Based Plasticizers from Soybean Oil for Tire Tread Rubber

Modified soybean oil (MSO) is synthesized from soybean oil (SO) and sulfur, aiming to reduce the double bond quantity of SO and avoid harmful effects on the crosslink density and mechanical properties of rubber. MSO modified with different weight percentages of sulfur is then used to plasticize tire tread rubber (TR). It is found that the crosslink density and modulus of MSO- plasticized rubber are significantly improved compared with that of SO-plasticized TR. MSO modified with 6 wt % sulfur (MSO-6%) exhibits the best plasticization effect on TR, thus, the plasticization effect of MSO-6% on TR was further studied by adjusting its additive content. Thereafter, the Mooney viscosity, Payne effect, mechanical property of different amount of MSO-6% plasticized TR are studied to investigate their plasticization effect. At the same additive content of plasticizer, the plasticization effect of MSO-6% and a commonly used aromatic hydrocarbon plasticizer (AO) is compared to determine the potential application of MSO on tire tread rubber. It is found MSO shows similar plasticization effect on TR compared with AO. More important, the aging resistance property and wear resistance property of MSO-6% plasticized rubber are better than those of AO-plasticized rubber. Therefore, MSO-6% is a promising bio-based plasticizer for tire tread rubber.

Preparation and Properties of Polyether Aliphatic Polymerized Amide as a Vegetable Oil-Based Epoxy Curing Agent

An epoxy curing agent polyether aliphatic polymerized amide (PEAPA) was synthesized using epoxy fatty acid methyl ester and diethylenetriamine. The Fourier transform infrared spectra and ¹H NMR analysis indicated successful synthesis of PEAPA. Gel permeation chromatography showed a high degree of polymerization. The obtained PEAPA was used to cure E51 epoxy resin and partially replace rigid 1,3-cyclohexanediamine curing agent. A series of epoxy resins with varying rigidities were prepared. The mechanical and thermal properties of the materials were analyzed. Mechanical property tests showed that the tensile strength and hardness of the materials decreased gradually with increased PEAPA content. However, elongation at breaks of the prepared materials increased with increased PEAPA content. Micromorphological investigation indicated excellent compatibility between PEAPA and the curing system. Furthermore, a dynamic mechanical thermal analysis demonstrated that the glass transition temperature of the epoxy resin decreased with increased PEAPA content. Thermal stability, while still excellent, decreased slightly with the addition of PEAPA. At the primary weight loss stage, initial decomposition temperatures for all resins were above 330 °C.

Polyvinyl chloride biodegradation by Pseudomonas citronellolis and Bacillus flexus

The accumulation of high amounts of petroleum-derived plastics in the environment has raised ecological and health concerns. The aim of this work was to study the biodegradative abilities of five bacterial strains, namely Pseudomonas chlororaphis, Pseudomonas citronellolis, Bacillus subtilis, Bacillus flexus and Chelatococcus daeguensis, towards polyethylene, polypropylene, polystyrene and polyvinyl chloride films under aerobic conditions. Preliminary screening resulted in the selection of P. citronellolis and B. flexus as potential PVC film degraders. Both strains were able to form a biofilm on the plastic film surface and to cause some modifications to the FTIR spectra of biomass-free PVC films. The two strains were then used to set up a PVC film biodegradation assay in 2-liter flasks. After 45 days incubation, fragmentation of the film was observed, suggesting that PVC biodegradative activity took place. Gel permeation chromatography analysis showed a reduction in average molecular weight of 10% for PVC incubated with P. citronellolis, with PVC polymer chains apparently attacked. Based on these results, the P. citronellolis strain was selected for biodegradation assays of two waste PVC films, used either nonsterile or subjected to ethanol sterilization. Chemical analyses on the incubated films confirmed the biodegradation of waste PVC plastics as shown by a gravimetric weight loss of up to about 19% after 30 days incubation. In summary, this work reports the biodegradation of PVC films by P. citronellolis and B. flexus. Both strains were shown to act mainly against PVC additives, exhibiting a low biodegradation rate of PVC polymer.

Enhancement of the Thermomechanical Properties of a Fly Ash- and Carbon Black-Filled Polyvinyl Chloride Composite by Using Epoxidized Soybean Oil as a Secondary Bioplasticizer

Plasticized polyvinyl chloride (PVC) was fabricated using epoxidized soybean oil (ESBO) as a secondary bioplasticizer with dioctyl phthalate (DOP). The PVC/MFA/CB composites were prepared by melt mixing of the plasticized PVC with modified fly ash (MFA), carbon black N330 (CB), and polychloroprene (CR) in a Haake Rheomix mixer using a rotation speed of 50 rpm at 175°C for 6 min and then compressed by Toyoseiki pressure machine under 15 MPa. The effect of ESBO content on morphology, melt viscosity, tensile properties, and flame retardancy of PVC/MFA/CB composites was investigated. The obtained results showed that the incorporation of ESBO has significantly enhanced the processing ability, Young’s modulus, tensile strength, and elongation at break of the PVC/MFA/CB composites. The torque of PVC/MFA/CB composites was increased to approximately 12% when 50 wt% of DOP was replaced by ESBO. When ESBO was 20 wt% in comparison with DOP weight, the elongation at break, tensile strength, and Young’s modulus of the composites were increased to 48%, 24%, and 4.5%, respectively. Correspondingly, thermogravimetric analysis results confirmed that ESBO had improved the thermostability of the PVC composites. The ESBO have potential as a secondary bioplasticizer replacement material for DOP owing to their better thermomechanical stability.

Plasticizers Derived from Biomass Resources: A Short Review

With rising environmental concerns and depletion of petrochemical resources, biomass-based chemicals have been paid more attention. Polyvinyl chloride (PVC) plasticizers derived from biomass resources (vegetable oil, cardanol, vegetable fatty acid, glycerol and citric acid) have been widely studied to replace petroleum-based o-phthalate plasticizers. These bio-based plasticizers mainly include epoxidized plasticizer, polyester plasticizer, macromolecular plasticizer, flame retardant plasticizer, citric acid ester plasticizer, glyceryl ester plasticizer and internal plasticizer. Bio-based plasticizers with the advantages of renewability, degradability, hypotoxicity, excellent solvent resistant extraction and plasticizing performances make them potential to replace o-phthalate plasticizers partially or totally. In this review, we classify different types of bio-based plasticizers according to their chemical structure and function, and highlight recent advances in multifunctional applications of bio-based plasticizers in PVC products. This study will increase the interest of researchers in bio-based plasticizers and the development of new ideas in this field.

Highly Transparent, Strong, and Flexible Films with Modified Cellulose Nanofiber Bearing UV Shielding Property

This work investigates multifunctional composite films synthesized with cellulose nanofibers (CNFs) and poly(vinyl alcohol) (PVA). First, TEMPO-oxidized CNFs were modified in the heterogeneous phase with benzophenone, diisocyanate, and epoxidized soybean oil via esterification reactions. A thorough characterization was carried out via elemental analysis as well as FT-IR and X-ray photoelectron spectroscopies and solid-state NMR. Following, the surface-modified CNFs were combined with PVA to endow composite films with UV-absorbing capabilities while increasing their thermomechanical strength and maintaining a high light transmittance. Compared to neat PVF films, the tensile strength, Young modulus, and elongation of the films underwent dramatic increases upon addition of the reinforcing phase (maximum values of ∼96 MPa, ∼ 714 MPa, and ∼350%, respectively). A high UV blocking performance, especially in the UVB region, was observed for the introduced multifunctional PVA films at CNF loadings below 5 wt %. The trade-off between modified nanofibril function as interfacial reinforcement and aggregation leads to an optimum loading. The results indicate promising applications, for example, in active packaging.