Forensic engineering of advanced polymeric materials – Part II: The effect of the solvent-free non-woven fabrics formation method on the release rate of lactic and glycolic acids from the tin-free poly(lactide-co-glycolide) nonwovens

Investigations into the characterization, degradation, and applications of biodegradable polymers by mass spectrometry

Biodegradable polymers have been getting more and more attention because of their contribution to the plastic pollution environmental issues and to move towards a circular economy. Nevertheless, biodegradable materials still exhibit various disadvantages restraining a widespread use in the market. Therefore, additional research efforts are required to improve their performance. Mass spectrometry (MS) affords a relevant contribution to optimize biodegradable polymer synthesis, to confirm macromolecular structures, to examine along the time the progress of degradation processes and highlight advantages and drawbacks in the extensive applications. This review aims to provide an overview of the MS investigations carried out to support the synthesis of biodegradable polymers, with helpful information on undesirable products or polymerization mechanism, to understand deterioration pathways by the structure of degradation products and to follow drug release and pharmacokinetic. Additionally, it summarizes MS studies addressed on environmental and health issues related to the extensive use of plastic materials, that is, potential migration of additives or microplastics identification and quantification. The paper is focused on the most significant studies relating to synthetic and microbial biodegradable polymers published in the last 15 years, not including agro-polymers such as proteins and polysaccharides.

Fabrication of Biomedical Scaffolds Using Biodegradable Polymers

Degradable polymers are used widely in tissue engineering and regenerative medicine. Maturing capabilities in additive manufacturing coupled with advances in orthogonal chemical functionalization methodologies have enabled a rapid evolution of defect-specific form factors and strategies for designing and creating bioactive scaffolds. However, these defect-specific scaffolds, especially when utilizing degradable polymers as the base material, present processing challenges that are distinct and unique from other classes of materials. The goal of this review is to provide a guide for the fabrication of biodegradable polymer-based scaffolds that includes the complete pathway starting from selecting materials, choosing the correct fabrication method, and considering the requirements for tissue specific applications of the scaffold.

End-of-Life Options for (Bio)degradable Polymers in the Circular Economy

End-of-life options for plastics include recycling and energy recovery (incineration). Taking into account the polymeric waste, recycling is the intentional action that is aimed at reducing the amount of waste deposited in landfills by industrial use of this waste to obtain raw materials and energy. The incineration of waste leads to recovery of the energy only. Recycling methods divide on mechanical (reuse of waste as a full-valuable raw material for further processing), chemical (feedstock recycling), and organic (composting and anaerobic digestion). The type of recycling is selected in terms of the polymeric material, origin of the waste, possible toxicity of the waste, and its flammability. The (bio)degradable polymers show the suitability for every recycling methods. But recycling method should be used in such a form that it is economically justified in a given case. Organic recycling in a circular economy is considered to be the most appropriate technology for the disposal of compostable waste. It is addressed for plastics capable for industrial composting such as cellulose films, starch blends, and polyesters. The biological treatment of organic waste leads also to a decrease of landfills and thereby reducing methane emissions from them. If we add to their biodegradability the absence of toxicity, we have a biotechnological product of great industrial interest. The paper presents the overview on end-of-life options useful for the (bio)degradable polymers. The principles of the circular economy and its today development were also discussed.

Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?

Interest in renewable polymers increased exponentially in the last decade and in this context poly(lactic acid) (PLA) became the leader mainly for practical reasons. Nevertheless, it is outstanding also from a scientific point of view, because its thermal and morphological properties are offering challenging new insights. With regard to dynamic mechanical analysis (DMA), PLA does not have the classical behavior of a thermoplastic polymer. Often, overlapping events (enthalpic relaxation, glass transition and crystallization) that occur as the temperature increases make the DMA result of a PLA look inexplicable even for polymer scientists. This review offers a perspective of the main phenomena that can be revealed in a DMA experiment and systematizes the information that can be obtained for every region (glassy, glass transition, rubbery, cold-crystallization and melting). Also, some unusual patterns registered in some cases will be commented upon. The review intends to offer indices that one should pay attention to in the interpretation of a DMA experiment, even if the investigator has only basic skills with DMA investigations.

Poly(Glycerol Succinate) as an Eco-Friendly Component of PLLA and PLCL Fibres towards Medical Applications

This study was conducted as a first step in obtaining eco-friendly fibres for medical applications using a synthesised oligomer poly(glycerol succinate) (PGSu) as an additive for synthetic poly(L-lactic acid) (PLLA) and poly (L-lactide-co-caprolactone) (PLCL). The effects of the oligomer on the structure formation, morphology, crystallisation behaviour, and mechanical properties of electrospun bicomponent fibres were investigated. Nonwovens were investigated by means of scanning electron microscopy (SEM), wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and mechanical testing. The molecular structure of PLLA fibres is influenced by the presence of PGSu mainly acting as an enhancer of molecular orientation. In the case of semicrystalline PLCL, chain mobility was enhanced by the presence of PGSu molecules, and the crystallinity of bicomponent fibres increased in relation to that of pure PLCL. The mechanical properties of bicomponent fibres were influenced by the level of PGSu present and the extent of crystal formation of the main component. An in vitro study conducted using L929 cells confirmed the biocompatible character of all bicomponent fibres.

Forensic Engineering of Advanced Polymeric Materials-Part VII: Degradation of Biopolymer Welded Joints

Welding technology may be considered as a promising processing method for the formation of packaging products from biopolymers. However, the welding processes used can change the properties of the polymer materials, especially in the region of the weld. In this contribution, the impact of the welding process on the structure and properties of biopolymer welds and their ability to undergo hydrolytic degradation will be discussed. Samples for the study were made from polylactide (PLA) and poly(3-hydroxyalkanoate) (PHA) biopolymers which were welded using two methods: ultrasonic and heated tool welding. Differential scanning calorimetry (DSC) analysis showed slight changes in the thermal properties of the samples resulting from the processing and welding method used. The results of hydrolytic degradation indicated that welds of selected biopolymers started to degrade faster than unwelded parts of the samples. The structure of degradation products at the molecular level was confirmed using mass spectrometry. It was found that hydrolysis of the PLA and PHA welds occurs via the random ester bond cleavage and leads to the formation of PLA and PHA oligomers terminated by hydroxyl and carboxyl end groups, similarly to as previously observed for unwelded PLA and PHA-based materials.

(Bio)degradable Polymeric Materials for Sustainable Future-Part 2: Degradation Studies of P(3HB-co-4HB)/Cork Composites in Different Environments

The degree of degradation of pure poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] and its composites with cork incubated under industrial and laboratory composting conditions was investigated. The materials were parallelly incubated in distilled water at 70 °C as a reference experiment (abiotic condition). It was demonstrated that addition of the cork into polyester strongly affects the matrix crystallinity. It influences the composite degradation independently on the degradation environment. Moreover, the addition of the cork increases the thermal stability of the obtained composites; this was related to a smaller reduction in molar mass during processing. This phenomenon also had an influence on the composite degradation process. The obtained results suggest that the addition of cork as a natural filler in various mass ratios to the composites enables products with different life expectancies to be obtained.

Prediction studies of environment-friendly biodegradable polymeric packaging based on PLA. Influence of specimens' thickness on the hydrolytic degradation profile

Application of new biodegradable polymer packaging based on polylactide (PLA), susceptible to organic recycling, can help in the waste reduction in landfills. In this paper, the results of the study on abiotic degradation of PLA and its blend containing 15 mol% of poly[(R,S)-3-hydroxybutyrate], as a model for the first step of organic recycling were presented. The samples used for this study have different shapes and thicknesses: rigid films and cuboid-bars. Particular emphasis was placed on determining the pattern of degradation products released into the medium. Originally, the results of present study revealed that the application of electrospray ionization mass spectrometry supported by high performance liquid chromatography allowed envisaging the differences in the degradation products pattern released from the studied PLA-based samples differing in thickness. The significant differences in degradation products pattern were predominately observed in the first steps of incubation process and are caused by an autocatalytic effect, which occurs mainly during degradation of the large size PLA samples. Although, the thickness of PLA-based packaging changes the degradation product patterns, however this does not increase the total amounts of acids released to the medium. Thus, it may be concluded that thickness should not affect significantly organic recycling of the packaging.

(Bio)degradable polymeric materials for a sustainable future - part 1. Organic recycling of PLA/PBAT blends in the form of prototype packages with long shelf-life

Prediction studies of advanced (bio)degradable polymeric materials are crucial when their potential applications as compostable products with long shelf-life is considered for today's market. The aim of this study was to determine the effect of the polylactide (PLA) content in the blends of PLA and poly(butylene adipate-co-terephthalate) (PBAT); specifically how the material's thickness corresponded to changes that occurred in products during the degradation process. Additionally, the influence of talc on the degradation profile of all samples in all environments was investigated. It was found that, differences in the degradation rate of materials tested with a similar content of the PLA component could be caused by differences in their thickness, the presence of commercial additives used during processing or a combination of both. The obtained results indicated that the presence of talc may interfere with materials behavior towards water and consequently alter their degradation profile.

Forensic Engineering of Advanced Polymeric Materials-Part V: Prediction Studies of Aliphatic⁻Aromatic Copolyester and Polylactide Commercial Blends in View of Potential Applications as Compostable Cosmetic Packages

The main aim of the present study was to determine the behavior of the specimens from Ecovio, in the form of dumbbell-shaped samples and films, during degradation in selected cosmetic ingredients such as water and paraffin. The (bio)degradation test of the prototype cosmetic package (sachet) made from a PBAT (poly[(1,4-butylene adipate)–co–(1,4-butylene terephthalate)]) and PLA (polylactide) blend was investigated under industrial composting conditions, and compared with the sample behavior during incubation in cosmetic media at 70 °C. During the degradation tests, the changes of the samples were evaluated using optical microscopy, ¹H NMR (proton nuclear magnetic resonance) and GPC (gel permeation chromatography) techniques. The structures of the degradation products were investigated using ESI-MSⁿ (mass spectrometry with electrospray ionization on positive and negative ions) analysis. The thermal properties of selected materials were determined by DSC (differential scanning calorimetry) and TGA (thermogravimetric analysis) analysis. It was concluded that the PBAT and PLA blend studied had a good stability during aging in cosmetic media, and could be recommended for long-shelf-life compostable packaging of cosmetics, especially with oily ingredients.

Forensic engineering of advanced polymeric materials Part IV: Case study of oxo-biodegradable polyethylene commercial bag - Aging in biotic and abiotic environment

The public awareness of the quality of environment stimulates the endeavor to safe polymeric materials and their degradation products. The aim of the forensic engineering case study presented in this paper is to evaluate the aging process of commercial oxo-degradable polyethylene bag under real industrial composting conditions and in distilled water at 70°C, for comparison. Partial degradation of the investigated material was monitored by changes in molecular weight, thermal properties and Keto Carbonyl Bond Index and Vinyl Bond Index, which were calculated from the FTIR spectra. The results indicate that such an oxo-degradable product offered in markets degrades slowly under industrial composting conditions. Even fragmentation is slow, and it is dubious that biological mineralization of this material would occur within a year under industrial composting conditions. The slow degradation and fragmentation is most likely due to partially crosslinking after long time of degradation, which results in the limitation of low molecular weight residues for assimilation. The work suggests that these materials should not be labeled as biodegradable, and should be further analyzed in order to avoid the spread of persistent artificial materials in nature.

Forensic engineering of advanced polymeric materials. Part III - Biodegradation of thermoformed rigid PLA packaging under industrial composting conditions

This paper presents a forensic engineering study on the biodegradation behaviour of prototype packaging thermoformed from PLA-extruded film and plain PLA film under industrial composting conditions. Hydrolytic degradation in water was conducted for reference. The effects of composting duration on changes in molar mass, glass transition temperature and degree of crystallinity of the polymeric material were monitored using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The chemical structure of water soluble degradation products of the polymeric material was determined using nuclear magnetic resonance (NMR) and electrospray ionization mass spectrometry (ESI-MS). The results show that the biodegradation process is less dependent on the thermoforming process of PLA and more dependent on the composting/degradation conditions that are applied. The increase in the dispersity index, leading to the bimodal molar mass distribution profile, suggests an autocatalytic hydrolysis effect at the early stage of the composting process, during which the bulk hydrolysis mechanism dominantly operates. Both the prototype PLA-packaging and PLA rigid film samples were shown to have a gradual increase in opacity due to an increase in the degree of crystallinity.

Mass spectrometry for the elucidation of the subtle molecular structure of biodegradable polymers and their degradation products

Contemporary reports by Polish authors on the application of mass spectrometric methods for the elucidation of the subtle molecular structure of biodegradable polymers and their degradation products will be presented. Special emphasis will be given to natural aliphatic (co)polyesters (PHA) and their synthetic analogues, formed through anionic ring-opening polymerization (ROP) of β-substituted β-lactones. Moreover, the application of MS techniques for the evaluation of the structure of biodegradable polymers obtained in ionic and coordination polymerization of cyclic ethers and esters as well as products of step-growth polymerization, in which bifunctional or multifunctional monomers react to form oligomers and eventually long chain polymers, will be discussed. Furthermore, the application of modern MS techniques for the assessment of polymer degradation products, frequently bearing characteristic end groups that can be revealed and differentiated by MS, will be discussed within the context of specific degradation pathways. Finally, recent Polish accomplishments in the area of mass spectrometry will be outlined.